Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Current issue: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17th
PlanS compliant
Select issue
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Silva Fennica vol. 44 no. 5 | 2010

Category : Research article

article id 452, category Research article
Catherine Ky-Dembele, Mulualem Tigabu, Jules Bayala, Patrice Savadogo, Issaka Joseph Boussim, Per Christer Odén. (2010). Clonal propagation of Detarium microcarpum from root cuttings. Silva Fennica vol. 44 no. 5 article id 452. https://doi.org/10.14214/sf.452
Keywords: Burkina Faso; sprouting efficiency; rootling; vegetative propagation
Abstract | View details | Full text in PDF | Author Info
Detarium microcarpum is a valuable tree species for fuelwood, timber, food and medicine in sub-Saharan Africa. However, its population is dwindling due to overexploitation, its seedlings’ low survival rate and slow growth. Vegetative propagation might enhance both survival and growth, but to date a successful clonal method does not exist for D. microcarpum. We conducted four experiments to examine the effects of propagation environment (high versus low humidity), cutting length and diameter, alignment of root segments (horizontal versus vertical) and distance from the root collar of donors on the regeneration ability of root segments collected from field-grown D. microcarpum trees in Burkina Faso. The size of root segments significantly affected their regeneration ability, while alignment had no effect. Sprouting was possible from 10 and 20-cm long segments of 15–60 mm diameter with 7–43% sprouting efficiency and multiple shoots while 5 cm long segments were unsuitable with 0–3% sprouting efficiency. Cuttings maintained at low humidity produced larger diameter sprouts than those in greenhouse. All cuttings showed strong polarity with most of the shoots developing at the proximal end. Rootlings from 20 cm root segments produced more new roots (0.62 ± 0.08 g) than those from 10 cm segments (0.34 ± 0.09 g), but they were similar for sprout and leaf growth. We conclude that lateral roots of field-grown mature trees can be used to produce rootlings in a nursery. Since this study is the first attempt to propagate D. microcarpum from root cuttings, further investigations are required to optimize the technique.
  • Ky-Dembele, Département Productions Forestières, Institut de l’Environnement et de Recherches Agricoles, 03 BP 7047 Ouagadougou 03, Burkina Faso & Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, P.O. Box 101, SE-230 53 Alnarp, Sweden (catherine.dembele@ess.slu.se) E-mail: kydembele@hotmail.com (email)
  • Tigabu, Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, P.O. Box 101, SE-230 53, Alnarp, Sweden E-mail: mt@nn.se
  • Bayala, World Agroforestry Centre, West Africa and Centre Regional Office, Sahel Node, BP E5118 Bamako, Mali E-mail: jb@nn.ml
  • Savadogo, Département Productions Forestières, Institut de l’Environnement et de Recherches Agricoles, 03 BP 7047 Ouagadougou 03, Burkina Faso & Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, P.O. Box 101, SE-230 53 Alnarp, Sweden E-mail: ps@nn.bf
  • Boussim, Université de Ouagadougou, Unité de Formation et Recherche en Sciences de la Vie et de la Terre, 03 BP 7021, Ouagadougou 03, Burkina Faso E-mail: ijb@nn.bf
  • Odén, Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, P.O. Box 101, SE-230 53, Alnarp, Sweden E-mail: pco@nn.se
article id 451, category Research article
Thomas P. Sullivan, Druscilla S. Sullivan, Pontus M. F. Lindgren, Douglas B. Ransome. (2010). Green-tree retention and life after the beetle: stand structure and small mammals 30 years after salvage harvesting. Silva Fennica vol. 44 no. 5 article id 451. https://doi.org/10.14214/sf.451
Keywords: biodiversity; stand structure; Pseudotsuga menziesii; ecological indicators; green-tree retention; small mammals; mountain pine beetle; Pinus contorta; salvage harvest
Abstract | View details | Full text in PDF | Author Info
We report on a retrospective investigation of the impacts of salvage harvesting of lodgepole pine (Pinus contorta var. latifolia Engelm. ex S. Wats.), killed by an outbreak of mountain pine beetle (Dendroctonus ponderosae Hopk.) in the 1970s, with variable retention of Douglas-fir (Pseudotsuga menziesii (Mirbel) Franco). Our inference to biodiversity was coniferous stand structure and four mammal species: the southern red-backed vole (Myodes gapperi Vigors), common shrew (Sorex cinereus Kerr), red squirrel (Tamiasciurus hudsonicus Erxleben) and northern flying squirrel (Glaucomys sabrinus Shaw). We tested hypotheses that, at 30 years after salvage harvest of beetle-killed lodgepole pine trees, (1) abundance and diversity of stand structure, and (2) abundance of mammal species, will increase with higher levels of green-tree retention (GTR). Stand structure attributes and small mammals were sampled during 2005–2008 in young pine stands, with a range of GTR seed-trees (none, dispersed, and aggregated Douglas-fir), and uncut forest in south-central British Columbia, Canada. Diameters and heights of Douglas-fir and lodgepole pine and basal area of total conifers supported hypothesis (1). Mean abundance of the red-backed vole was consistently higher (2.3 to 6.4 times) in the uncut forest than other stands. Overall mean patterns of abundance for common shrews, red squirrels, and northern flying squirrels were similar among treatment stands. Mean abundance of the red-backed vole supported hypothesis (2), but numbers of the other three species did not. There is “life after the beetle” at 30 years after salvage harvesting, and this was enhanced by GTR.
  • Sullivan, Department of Forest Sciences, Faculty of Forestry, University of BC, 2424 Main Mall, Vancouver, BC, Canada V6T 1Z4 E-mail: tom.sullivan@ubc.ca (email)
  • Sullivan, Department of Forest Sciences, Faculty of Forestry, University of BC, 2424 Main Mall, Vancouver, BC, Canada V6T 1Z4 E-mail: dss@nn.ca
  • Lindgren, Applied Mammal Research Institute, 11010 Mitchell Avenue, Summerland, BC, Canada V0H 1Z8 E-mail: pmfl@nn.ca
  • Ransome, Applied Mammal Research Institute, 11010 Mitchell Avenue, Summerland, BC, Canada V0H 1Z8 E-mail: dbr@nn.ca
article id 127, category Research article
Mika Rekola, Annukka Valkeapää, Tapio Rantala. (2010). Nordic forest professionals’ values. Silva Fennica vol. 44 no. 5 article id 127. https://doi.org/10.14214/sf.127
Keywords: forest professionals; values; cognitive mapping; Nordic countries
Abstract | View details | Full text in PDF | Author Info
The present study analyses the values held by forest professionals in three Nordic countries: Finland, Norway, and Sweden. The data is from a large (n = 1113) internet survey that used cognitive mapping as a research tool, which is a novelty in value measurement. The questionnaire is based on the organisational value theory of Schein (1992), supplemented with relevant forest-related and environmental values. The forest-related main value factors were in the following order of importance: Expertise, Private forestry, Forest production, Nature conservation, and Tradition. The measurement included two kinds of cases: action values, referring to present decision-making, and ideal values, referring to decisions concerning future ideals. Most of the values’ scores were similar. Almost all values received higher scores of importance in the ideal cases compared to action cases, a fact that can probably be explained by constraints related to the professionals’ current working environment. Some international differences were also found: Sweden and Norway were closer to each other and both differed from Finland, where private forestry, forest production, and traditions are highly valued. Moreover, respondents working in industry were found to be slightly more production-oriented than other forest professionals. The study also revealed several weaknesses of the cognitive mapping method in measuring values.
  • Rekola, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki E-mail: mika.rekola@helsinki.fi (email)
  • Valkeapää, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki E-mail: av@nn.fi
  • Rantala, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki E-mail: tapio.rantala@helsinki.fi
article id 126, category Research article
Anders Roos, Lotta Woxblom, Denise McCluskey. (2010). The influence of architects and structural engineers on timber in construction – perceptions and roles. Silva Fennica vol. 44 no. 5 article id 126. https://doi.org/10.14214/sf.126
Keywords: timber-frame building; qualitative analysis; specifiers; stakeholders; timber design
Abstract | View details | Full text in PDF | Author Info
This study considers structural engineers’ and architects’ perceptions of structural timber in multi-story construction contexts. Qualitative approaches – interviews and focus groups – were used to investigate attitudes, perceived norms, and perceived factors that hamper or facilitate the prescription of wood use in construction. Wood was perceived as an appropriate building material. Architects’, and even more so engineers’, perceptions of negative aspects of wood focused on decay, instability and sound transmission. Although wood-based construction was seen as a required professional skill, it was not expected to improve one’s professional status. Positive aspects of wood in construction included its strength, environmental friendliness, simple handling and appropriateness for use in conjunction with industrial methods, whereas knowledge gaps and weak support from the wood industry have reduced the use of wood among structural engineers and architects. Both professions perceived their influence on material selection to be weak. They sensed that most of the influence over material selection rested with developers and contractors. The paper contains suggestions on how to make these two professions more influential advocates for wood in construction.
  • Roos, Swedish University of Agricultural Sciences, Department of Forest Products, P.O. Box 7008, SE-750 07 Uppsala, Sweden E-mail: anders.roos@sprod.slu.se (email)
  • Woxblom, Swedish University of Agricultural Sciences, Department of Forest Products, P.O. Box 7008, SE-750 07 Uppsala, Sweden E-mail: lw@nn.se
  • McCluskey, Swedish University of Agricultural Sciences, Department of Forest Products, P.O. Box 7008, SE-750 07 Uppsala, Sweden E-mail: dm@nn.se
article id 125, category Research article
Juho Rantala, Tiina Laine. (2010). Productivity of the M-Planter tree-planting device in practice. Silva Fennica vol. 44 no. 5 article id 125. https://doi.org/10.14214/sf.125
Keywords: silviculture; cost-efficiency; mechanisation; planting; seedling; technology
Abstract | View details | Full text in PDF | Author Info
Need to mechanise tree-planting work have recently increased for many reasons. The newest planting and soil scarification device performing work in Nordic forests is the Finnish M-Planter. This study aims to clarify M-Planter’s productivity in practice and show how various factors affect it. The follow-up data set covers 607 work shifts, of 13 operators with, in total, five M-Planters. The average productivity figures for the operators were 143 and 169 seedlings per effective working hour during the first and second planting season, respectively. Overall, the measured average productivity was 34.2% lower than that observed in an earlier work study of the M-Planter based on an experimental study design. On average, the operators learned to use the combination of the M-Planter and a base machine more efficiently while their experience in using it increased during the follow-up. Increasing number of stones and stumps as well as a thicker humus layer decreased productivity of the M-Planter. The study concludes that utilisation of the full productivity potential of the M-Planter requires not only good operators but also development of the whole planting service supply chain.
  • Rantala, Finnish Forest Research Institute, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: juho.rantala@metla.fi (email)
  • Laine, Finnish Forest Research Institute, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: tl@nn.fi
article id 124, category Research article
Johannes Windisch, Lauri Sikanen, Dominik Röser, David Gritten. (2010). Supply chain management applications for forest fuel procurement – cost or benefit? Silva Fennica vol. 44 no. 5 article id 124. https://doi.org/10.14214/sf.124
Keywords: logistics; forest fuel; supply chain management; cost-benefit analysis
Abstract | View details | Full text in PDF | Author Info
It is commonly agreed that logistics is very demanding in forest fuel business. Even though logistics and supply chain management (SCM) tools already have found their way into forestry business, for example, in roundwood operations, they are not yet very widespread in the field of forest fuel procurement. The present study investigates if modern supply chain management applications are capable of increasing the profitability of forest fuel procurement operations. Since margins are low, decreasing the provision costs could boost wood-based bioenergy business. The study is based on the investigation of two Finnish forest owners associations (FOA) involved in forest fuel procurement using a modern SCM tool. The investigation is done by cost-benefit analysis (CBA) using the net present value (NPV) methodology to determine the profitability. According to the estimates made by the staff, which are based on data such as work time records and delivery notes from before and after introduction of the new system, in both FOAs, the benefits far outweigh the costs over a considered timespan of ten years. However, the amount of the NPV varied significantly. For FOA1, with an annual chip production of 150 000 loose m3, the NPV is 212 739 euro, while for FOA2, with an annual chip production of 37 000 loose m3, the NPV is 969 841 euro. Even if the NPV of FOA2 seems to be very high, the profitability of SCM tools in forest fuel procurement is clearly demonstrated. Additionally, the results indicate that a considerable cost saving potential in forest fuel procurement is attainable through improving work flows and thus reduce the work input.
  • Windisch, Finnish Forest Research Institute, Joensuu Research Unit, Yliopistokatu 6, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: johannes.windisch@metla.fi (email)
  • Sikanen, University of Eastern Finland, School of Forest Science, Yliopistokatu 7, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: ls@nn.fi
  • Röser, Finnish Forest Research Institute, Joensuu Research Unit, Yliopistokatu 6, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: dr@nn.fi
  • Gritten, University of Eastern Finland, School of Forest Science, Yliopistokatu 7, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: dg@nn.fi
article id 123, category Research article
Staffan Jacobson, Folke Pettersson. (2010). An assessment of different fertilization regimes in three boreal coniferous stands. Silva Fennica vol. 44 no. 5 article id 123. https://doi.org/10.14214/sf.123
Keywords: Pinus sylvestris; boreal forests; Picea abies; biomass yield; carbon sequestration; fertilization regimes; foliar analysis
Abstract | View details | Full text in PDF | Author Info
In 1981–82 three field experiments were established with the aim of elucidating (i) the growth response of middle-aged coniferous stands at different fertilization intensities and, hence, the economic outcomes; and (ii) the need to add nutrients other than nitrogen (N). Nutrient additions were performed at intervals of two, four, six and eight years. The experiments were established on typical podzolized and N-limited mor-humus sites, two in Scots pine (Pinus sylvestris L.) stands and one in a Norway spruce (Picea abies (L.) Karst.) stand, at three different locations in Sweden. The ages of the stands were 65–70 years at the time of establishment. Growth responses were calculated after a 22-year study period. The growth responses were significant in all treatments. The addition of nutrients other than N did not affect stem growth at any of the sites. The growth response tended to increase with decreasing application interval. The results also revealed that the efficiency of fertilization is reduced as the interval between fertilizations is shortened. Accordingly, the growth effect per kg of added N was negatively correlated to fertilization intensity. The least intensive fertilization regime (an eight-year interval) resulted in an average net increase in C sequestration of 35 kg per kg N added. The profitability, in terms of internal rate of return, the present net value at different interest rates and the cost of production, i.e. the cost to produce one extra m3 under the different N regimes, are presented and discussed.
  • Jacobson, Skogforsk, Uppsala Science Park, SE-75183 Uppsala, Sweden E-mail: staffan.jacobson@skogforsk.se (email)
  • Pettersson, Skogforsk, Uppsala Science Park, SE-75183 Uppsala, Sweden E-mail: fp@nn.se
article id 122, category Research article
Benoit Lafleur, Nicole J. Fenton, David Paré, Martin Simard, Yves Bergeron. (2010). Contrasting effects of season and method of harvest on soil properties and the growth of black spruce regeneration in the boreal forested peatlands of eastern Canada. Silva Fennica vol. 44 no. 5 article id 122. https://doi.org/10.14214/sf.122
Keywords: soil disturbance; peatland; Picea mariana; careful logging; clearcutting; paludification; forest productivity
Abstract | View details | Full text in PDF | Author Info
It has been suggested that without sufficient soil disturbance, harvest in boreal forested peatlands may accelerate paludification and reduce forest productivity. The objectives of this study were to compare the effects of harvest methods (clearcutting vs. careful logging) and season (summer vs. winter harvest) on black spruce regeneration and growth in boreal forested peatlands of eastern Canada, and to identify the soil variables that favour tree growth following harvest. Moreover, we sought to determine how stand growth following harvest compared with that observed following fire. The average tree height of summer clearcuts was greater than that of summer carefully logged stands and that of all winter harvested sites. Summer clearcutting also resulted in a higher density of trees > 3 m and > 4 m tall and in a 50% reduction in Rhododendron groenlandicum cover, a species associated with reduced black spruce growth. Height growth of sample trees was related to foliar N and P concentrations, and to soil total N, pH and available Ca and Mg but not to harvest method or season. Our results also indicate that summer clearcutting could produce stand productivity levels comparable to those observed after high-severity soil burns. These results suggest that summer clearcutting could be used to restore forest productivity following harvest in forested peatlands, and offer further support to the idea that sufficient levels of soil disturbance may be required to restore productivity in ecosystems undergoing paludification.
  • Lafleur, NSERC-UQAT-UQAM Industrial Chair in Sustainable Forest Management, Université du Québec en Abitibi-Témiscamingue, 445 boul. de l’Université, Rouyn-Noranda, QC J9X 5E4, Canada E-mail: benoit.lafleur@uqat.ca (email)
  • Fenton, NSERC-UQAT-UQAM Industrial Chair in Sustainable Forest Management, Université du Québec en Abitibi-Témiscamingue, 445 boul. de l’Université, Rouyn-Noranda, QC J9X 5E4, Canada E-mail: njf@nn.ca
  • Paré, Natural Resources Canada, Canadian Forest Service, Laurentian Forestry Centre, 1055 du P.E.P.S., P.O. Box 10380, Stn. Sainte-Foy, QC G1V 4C7, Canada E-mail: dp@nn.ca
  • Simard, Département de Géographie, Université Laval, Pavillon Abitibi-Price, 2405 rue de la Terrasse, Québec, QC G1V 0A6, Canada E-mail: ms@nn.ca
  • Bergeron, NSERC-UQAT-UQAM Industrial Chair in Sustainable Forest Management, Université du Québec en Abitibi-Témiscamingue, 445 boul. de l’Université, Rouyn-Noranda, QC J9X 5E4, Canada E-mail: yb@nn.ca
article id 121, category Research article
Catherine Ky-Dembele, Jules Bayala, Patrice Savadogo, Mulualem Tigabu, Per Christer Odén, Issaka Joseph Boussim. (2010). Comparison of growth responses of Khaya senegalensis seedlings and stecklings to four irrigation regimes. Silva Fennica vol. 44 no. 5 article id 121. https://doi.org/10.14214/sf.121
Keywords: rooted cuttings; water stress; Senegal mahogany
Abstract | View details | Full text in PDF | Author Info
Khaya senegalensis is an important tree species for timber production, native to West Africa, but mahogany shoot borer attacks prevent successful plantations. This research was aimed at comparing the growth of two propagule types, seedlings and stecklings, of Khaya senegalensis subjected to four irrigation regimes, 25, 50, 75 and 100% field capacity in Burkina Faso. The relative growth rate, biomass allocation and intrinsic water use efficiency of the propagules were assessed in a full-factorial pot experiment in block design. Except the relative growth rate of stem basal diameter and specific leaf area, for which mean values were significantly higher for seedlings than stecklings, the two propagule types had similar growth patterns regarding relative growth rates of stem length, leaf, stem, root and the total plant biomass. There was no significant difference between propagule types concerning biomass fraction to total plant biomass of leaf, stem and root, root to stem ratio, leaf area productivity and carbon isotope ratio (δ13C). However, the irrigation regimes significantly affected all parameters. In contrast to 75 and 100% field capacity irrigation regimes, the low water supply of 25 and 50% field capacity resulted in plant stress, which was evident from the significant reduction in plant growth and biomass production and an increase in the root biomass to total plant biomass ratio and δ13C. It can be concluded that seedlings and stecklings have comparable growth patterns, while water stress is a major growth-limiting factor highlighting the need for selecting drought and borer resistant genotypes for successful plantations.
  • Ky-Dembele, Département Productions Forestières, Institut de l’Environnement et de Recherches Agricoles, 03 BP 7047 Ouagadougou 03, Burkina Faso & Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, P.O. Box 101, SE-230 53 Alnarp, Sweden (catherine.dembele@slu.se) E-mail: kydembele@hotmail.com (email)
  • Bayala, World Agroforestry Centre, West Africa and Centre Regional Office, Sahel Node, BP E5118 Bamako, Mali E-mail: jb@nn.ml
  • Savadogo, Département Productions Forestières, Institut de l’Environnement et de Recherches Agricoles, 03 BP 7047 Ouagadougou 03, Burkina Faso & Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, P.O. Box 101, SE-230 53 Alnarp, Sweden E-mail: ps@nn.bf
  • Tigabu, Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, P.O. Box 101, SE-230 53, Alnarp, Sweden E-mail: mt@nn.se
  • Odén, Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, P.O. Box 101, SE-230 53, Alnarp, Sweden E-mail: pco@nn.se
  • Boussim, Université de Ouagadougou, Unité de Formation et Recherche en Sciences de la Vie et de la Terre, 03 BP 7021, Ouagadougou 03, Burkina Faso E-mail: ijb@nn.bf
article id 120, category Research article
Antti J. Lukkarinen, Seppo Ruotsalainen, Teijo Nikkanen, Heli Peltola. (2010). Survival, height growth and damages of Siberian (Larix sibirica Ledeb.) and Dahurian (Larix gmelinii Rupr.) larch provenances in field trials located in southern and northern Finland. Silva Fennica vol. 44 no. 5 article id 120. https://doi.org/10.14214/sf.120
Keywords: height growth; survival; larch; Larix; provenance; seedling damage
Abstract | View details | Full text in PDF | Author Info
The aim of this study was to analyse differences in the survival and height growth of, as well as damages to Siberian (Larix sibirica Ledeb.) and Dahurian (Larix gmelinii Rupr.) larch provenances over four growing seasons in field trials established in 2006 in southern (Punkaharju) and northern Finland (Kivalo). In this context, the study also investigated if the geographical and climatic conditions of the origin of the provenance could explain the differences between the provenances. The study material consisted of 20 Russian Siberian and Dahurian larch provenances and five seed sources from Finland (4) and Russia (1) as comparison lots. It was found that the Finnish seed sources of Siberian larch survived well in both the Kivalo and Punkaharju trials. Five northern latitude Russian provenances, of which one was Dahurian and the remainder were Siberian larches, had the highest survival in Kivalo. However, the differences observed in survival between provenances were only significant (p < 0.05) in Kivalo. Regardless of the trial, the differences, however, in height growth were significant and large between provenances. The southern Dahurian larches had a superior height growth in Punkaharju. The northern Dahurian larch provenance from Magadan (59°50′N, 150°40′E) had the largest height growth in Kivalo, among some northern Siberian larches. Damages were diverse, though Dahurian larches had less mammal damage than the Siberian larches. In general, the differences between provenances were not significant. Latitude and altitude best explained the differences between provenances, but also mean temperature, temperature sum and continentality index affected them (p < 0.05).
  • Lukkarinen, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: antti.lukkarinen@pp.inet.fi (email)
  • Ruotsalainen, Finnish Forest Research Institute, FI-58450 Punkaharju, Finland E-mail: sn@nn.fi
  • Nikkanen, Finnish Forest Research Institute, FI-58450 Punkaharju, Finland E-mail: tn@nn.fi
  • Peltola, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hp@nn.fi
article id 111, category Research article
Ilona Pietilä, Annika Kangas, Antti Mäkinen, Lauri Mehtätalo. (2010). Influence of growth prediction errors on the expected losses from forest decisions. Silva Fennica vol. 44 no. 5 article id 111. https://doi.org/10.14214/sf.111
Keywords: growth prediction; uncertainty; forest information; updating; inoptimality loss
Abstract | View details | Full text in PDF | Author Info
In forest planning, forest inventory information is used for predicting future development of forests under different treatments. Model predictions always include some errors, which can lead to sub-optimal decisions and economic loss. The influence of growth prediction errors on the reliability of projected forest variables and on the treatment propositions have previously been examined in a few studies, but economic losses due to growth prediction errors is an almost unexplored subject. The aim of this study was to examine how the growth prediction errors affected the expected losses caused by incorrect harvest decisions, when the inventory interval increased. The growth models applied in the analysis were stand-level growth models for basal area and dominant height. The focus was entirely on the effects of growth prediction errors, other sources of uncertainty being ignored. The results show that inoptimality losses increased with the inventory interval. Average relative inoptimality loss was 3.3% when the inventory interval was 5 years and 11.6% when it was 60 years. Average absolute inoptimality loss was 230 euro ha–1 when the inventory interval was 5 years and 860 euro ha–1 when it was 60 years. The average inoptimality losses varied between development classes, site classes and main tree species.
  • Pietilä, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: ip@nn.fi
  • Kangas, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: annika.kangas@helsinki.fi (email)
  • Mäkinen, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: am@nn.fi
  • Mehtätalo, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: lm@nn.fi

Click this link to register to Silva Fennica.
If you are a registered user, log in to save your selected articles for later access.
Sign up to receive alerts of new content
Your selected articles