Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Current issue: 58(4)

Under compilation: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17th
PlanS compliant
Select issue
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'planting'

Category : Article

article id 5552, category Article
Liisa Saarenmaa, Timo Leppälä. (1995). Fill-in seedlings in constituting the stocking of Scots pine stands in northern Finland. Silva Fennica vol. 29 no. 2 article id 5552. https://doi.org/10.14214/sf.a9203
Keywords: Pinus sylvestris; planting; spatial pattern; artificial regeneration; fill planting; survival of seedlings
Abstract | View details | Full text in PDF | Author Info

Fill planting is a common procedure following reforestation in Finland. In 1990, 13% of the total of seedlings planted was used for fill planting. The objective of this study is (i) to survey the survival of fill-in seedlings and (ii) to estimate the spatial pattern of stands to evaluate the importance of fill-in seedlings in constituting the stocking of Scots pine (Pinus sylvestris L.) stands in Central and Northern Finland.

A survey of 63 artificially regenerated Scots pine stands was conducted in 1990. Stand densities varied from 950 to 3,925 seedlings/ha. The mean densities of originally planted, fill planted and naturally regenerated seedlings were 863, 639 and 791/ha, respectively. The survival of originally planted seedlings was 36% and that of fill-in seedlings 48%. Death rate of fill-in seedlings of Scots pine increased with longer times between original and fill planting. The survival rate of Norway spruce (Picea abies) seedlings was correlated with temperature sum. Height of the fill-in seedlings was less than that of the originally planted ones. Most stands had an even spatial distribution with the exception of sparsely populated stands, which were somewhat clustered. This indicates that dying of seedlings is not randomly spread. Because of poor survival, fill planting seems to be a risky business in most cases.

  • Saarenmaa, E-mail: ls@mm.unknown (email)
  • Leppälä, E-mail: tl@mm.unknown
article id 5503, category Article
Juha Heiskanen. (1993). Variation in water retention characteristics of peat growth media used in tree nurseries. Silva Fennica vol. 27 no. 2 article id 5503. https://doi.org/10.14214/sf.a15664
Keywords: density; production; water retention; container grown plants; porosity; growth media; substrates; planting stock; hydraulic conductivity; Sphagnum peat media; physical properties
Abstract | View details | Full text in PDF | Author Info

The water retention characteristics and their variation in tree nurseries and related physical properties were determined for commercially produced growth media made of light slightly humified Sphagnum peat. A total of 100 samples of peat media were collected from filled seedling trays in the greenhouses of four Finnish nurseries in 1990. In addition, the physical properties were determined for two growth media made of compressed peat sheets and chips. The variation in water retention characteristics in nurseries was described using linear models with fixed and random effects. The sources of variation in the mixed linear models were producer, grade, batch (greenhouse) and sample (tray).

The water retention of the peat media at different matric potentials was comparable to that given in the literature. The media shrank an average of 0–16% during desorption. The peat grades were finer than the Nordic quality standards for peat growth media. Particles < 1 mm increased and particles 1–5 mm decreased the water retention characteristics measured. The greatest total variation in water retention was at -1 kPa. The water retention of the peat media differed least at -5 and -10 kPa. The water retention characteristics of media from different producers usually differed significantly. The grades, on the other hand, did not differ from each other in their water retention characteristics nor were there significant interactions between producer and grade. The batch effect was marked but was lower than the effect within batches, where the sample (tray) effect was greater than the effect due to random measurement error. At -10 kPa, the measurement error was, however, clearly greater than the sample effect. The random measurement error was comparable to the batch effect. Aeration of the growth media is dependent on the water content retained between saturation and -1 kPa. The water availability to seedlings at the nursery phase is affected mainly by water retention between -1 and -10 kPa.
The PDF includes an abstract in Finnish.

  • Heiskanen, E-mail: jh@mm.unknown (email)
article id 5495, category Article
Hannu Salminen, Martti Varmola. (1993). Influence of initial spacing and planting design on the development of young Scots pine (Pinus sylvestris L.) stands. Silva Fennica vol. 27 no. 1 article id 5495. https://doi.org/10.14214/sf.a15656
Keywords: Pinus sylvestris; yield; Scots pine; planting; spacing; quality
Abstract | View details | Full text in PDF | Author Info

Three Scots pine (Pinus sylvestris L.) plantations carrying 35 plots with initial spacings from 800 to 5,000 plants/ha were studied. Planting designs varied from a square to a rectangle with 5-metre row distance, the plant-to-plant distance being 0.8 metres. At current dominant height of 6 m, rectangularity had no effect on height, diameter, or volume growth of trees. Slight ovality of stems was observed in rectangular plots but the differences in the cross-wise mean diameters were very small, not over 1.1 mm in terms of plot-wise means. The diameter of the thickest living branch of a tree was linearly dependent of the dbh. The branches were clearly thicker between the planting rows at under 1,600 stems/ha stand density. A non-square planting pattern is a conceivable alternative when the line corridors suitable for mechanized silvicultural operations are preferred.
The PDF includes an abstract in Finnish.

  • Salminen, E-mail: hs@mm.unknown (email)
  • Varmola, E-mail: mv@mm.unknown
article id 5445, category Article
Taneli Kolström. (1991). Kuusen kylvö- ja istutuskoe viljavilla kivennäismailla Pohjois-Karjalassa. Silva Fennica vol. 25 no. 2 article id 5445. https://doi.org/10.14214/sf.a15599
English title: Results from the sowing and planting experiment of Norway spruce (Picea abies) on fertile sites in North Karelia, Finland.
Original keywords: kuusi; kylvö; istutus; metsänuudistaminen; heinäntorjunta; kuolleisuus; pituuskasvu
English keywords: Picea abies; height growth; planting; mortality; sowing; artificial regeneration; survival rate; control of ground vegetation
Abstract | View details | Full text in PDF | Author Info

Different methods of sowing and planting of Norway spruce (Picea abies (L.) H. Karst.) were compared on fertile sites in North Karelia (62°20’N, 29°35’E, 85–120 m a.s.l.). The planting material were 4-year-old bare-rooted transplants, 2-year-old bare-rooted seedlings, and 2-year-old containerized seedlings raised in plastic greenhouse. The sowing methods were band sowing and shelter sowing. Ground vegetation was controlled during the first growing season mechanically or chemically, or the control was omitted totally.

Planting of spruce gave better results than sowing. After eight growing seasons there were sowed seedlings left in 30% of the sowing pots. The average height of them was 35 cm. Seedling survival was best with large bare-rooted transplants (91%). Survival of containerized seedlings was 79% and of small bare-rooted transplants 71%. The average height of large bare-rooted transplants was 131 cm, of containerized seedlings 86 cm and small bare-rooted seedlings 68 cm.

Sowing is not an advisable method for regeneration of spruce due to the small survival rate and slow initial development when ground vegetation is controlled only once. Also 2-year-old seedlings gave a satisfactory result in regeneration. Seedlings raised in greenhouse were more sensitive to frost damage than seedlings grown on open ground.

The PDF includes an abstract in English.

  • Kolström, E-mail: tk@mm.unknown (email)
article id 5409, category Article
Jukka Lippu, Pasi Puttonen. (1990). Istutustaimen juuriston alkukehitys kasvupaikalla. Silva Fennica vol. 24 no. 1 article id 5409. https://doi.org/10.14214/sf.a15561
English title: The early development of seedling roots at the planting site: A literature review.
Original keywords: menetelmät; maan kosteus; maan lämpötila; juuriston kehitys; fotosynteesituote; fysiologinen sopeutuminen; istutustaimet
English keywords: planting; soil temperature; root growth; soil moisture; photosynthates; acclimatization; methodology
Abstract | View details | Full text in PDF | Author Info

The structure and functional responses of roots in planted seedlings when acclimatizing at the planting site are reviewed. A wide range of methods for classifying roots has been employed, and the terminology used is not uniform. Roots can be classified by their morphology, origin, and function. The temporal and spatial variation of soil temperature, moisture, structure, and concentration of nutrients are among the most important properties to which root systems acclimatize. In order to reliably describe the function of the root system, several parameters usually have to be measured. Studies on the root-soil interface have indicated that roots are not necessarily in continuous contact with soil. The control mechanism of root growth is inadequately known and theoretically formulated. Generally, only the mass needed for water and nutrient uptake has been allocated to the roots. However, the amount of photosynthates allocated to the roots is high. Acclimatization of seedlings out at the planting site is a complicated process which is influenced by the growing conditions at both the nursery and at the site. The function, distribution and structure of roots are controlled by the environment in a way similar to the shoot, but the control mechanism is imperfectly known.

The PDF includes an abstract in English.

  • Lippu, E-mail: jl@mm.unknown (email)
  • Puttonen, E-mail: pp@mm.unknown
article id 5384, category Article
Raija-Liisa Petäistö. (1989). Syyskoulinnan ajankohdan vaikutus männyn taimien kuiva-ainepitoisuuteen, neulasten pitolujuuteen ja juurten uudistumiskykyyn. Silva Fennica vol. 23 no. 3 article id 5384. https://doi.org/10.14214/sf.a15541
English title: The influence of autumn transplanting date on the dry matter content, needle retention values and root regeneration of Scots pine (Pinus sylvestris) seedlings.
Original keywords: mänty; taimitarhat; koulinta; kuiva-ainepitoisuus; juurten kasvu
English keywords: Pinus sylvestris; root growth; nurseries; transplanting; dry matter content
Abstract | View details | Full text in PDF | Author Info

The experiment was performed in 1982–85 at the forest tree nursery in Suonenjoki, Central Finland. There were four to five transplanting dates ranging from the beginning of August to the end of September. The dry matter content, root regeneration and needle retention value of Scots pine (Pinus sylvestris L.) seedlings were examined. Development of the needle retention value in autumn was followed in nurseries at Suonenjoki, Rantasalmi, Mäntyharju and Taavetti in 1982.

Root regeneration was usually the worse, the later the seedlings were transplanted in the autumn. The dry matter content was generally lowest in the seedlings transplanted later in the autumn, and also to some extent in the seedlings transplanted at the beginning of August. The needle retention value increased as autumn advanced. Early transplanting in autumn had an adverse effect on the development of needle retention, and the values were highest in the seedlings transplanted later in the autumn.

The PDF includes an abstract English.

  • Petäistö, E-mail: rp@mm.unknown (email)
article id 5360, category Article
Risto Rikala, Pasi Puttonen. (1988). Maan lämpötilan vaikutus kuivuusrasitukseen perustuvassa taimien laatutestissä. Silva Fennica vol. 22 no. 4 article id 5360. https://doi.org/10.14214/sf.a15517
English title: Effect of soil temperature in drought exposure-based test of seedling quality.
Keywords: Scots pine; soil temperature; root growth; seedling growth; shoot growth; drought; planting shock; desiccation
Abstract | View details | Full text in PDF | Author Info

The effect of root exposure on the shoot and root development of Pinus sylvestris (L.) seedlings was studied at two soil temperatures. Roots of bare-rooted three-year-old seedlings were exposed to the temperature of 32°C at relative humidity of 50–40% for 85, 155 and 270 minutes which corresponds to accumulated water pressure deficit of 24, 47 and 91 mbar·h, respectively. Thereafter, seedlings were grown for 65 days at the soil temperatures of 12 and 23°C. Drought exposures inhibited new root initiation, delayed shoot elongation, and reduced shoot and needle growth. The stronger the exposure the larger the proportion of needles from the lower part of current shoot that remained undeveloped. Low soil temperature increased the effect of exposures so that needle elongation and initiation of new root tips of seedlings in cold soil with the longest exposure were inhibited totally. Root growth assessments made in warm soil may overestimate the acclimation potential of planted seedlings.

The PDF includes an abstract in English.

  • Rikala, E-mail: rr@mm.unknown (email)
  • Puttonen, E-mail: pp@mm.unknown
article id 5249, category Article
Jari Parviainen. (1985). Istuttamalla perustetun nuoren männikön, kuusikon, siperianlehtikuusikon ja rauduskoivikon kasvu. Silva Fennica vol. 19 no. 4 article id 5249. https://doi.org/10.14214/sf.a15428
English title: Growth of young Scots pine, Norway spruce, siberian larch and silver birch plantations.
Original keywords: kuusi; istutus; taimikko; läpimitan kasvu; tilavuuskasvu; pituuskasvu; rauduskoivu; siperianlehtikuusi; kasvunopeus
English keywords: Betula pendula; Picea abies; height growth; planting; diameter growth; volume growth; seedling stands; Larix sibirica
Abstract | View details | Full text in PDF | Author Info

Early growth of four different tree species (Pinus sylvestris L., Picea abies (L.) H. Karst., Larix sibirica Ledeb and Betula pendula Roth) 16–23 years after planting were compared in a field experiment of 16 square plots established on a stony, grove-like upland (Oxalis-Myrtillus forest type) in Southern Finland. This study gives additional results to the publication Folia Forestalia 386/1979.

At this early stage, the growth of the spruce stand was clearly slower than that of the other species for all parameters to be measured (height, diameter, and volume growth). Height growth was most rapid in the silver birch stand and diameter growth in the larch stand. No clear differences were found in the mean volume of the 100 thickest trees in the stand between the larch and silver birch.

The PDF includes a summary in English.

  • Parviainen, E-mail: jp@mm.unknown (email)
article id 5243, category Article
Eljas Pohtila, Tapani Pohjola. (1985). Maan kunnostus männyn viljelyssä Lapissa. Silva Fennica vol. 19 no. 3 article id 5243. https://doi.org/10.14214/sf.a15422
English title: Soil preparation in reforestation of Scots pine in Lapland.
Original keywords: mänty; istutus; kulotus; maanmuokkaus; Lappi; laikutus; lautasauraus; uudistustavat; hajakylvö
English keywords: Pinus sylvestris; soil preparation; Scots pine; planting; regeneration methods; scalping; prescribed burning; disc ploughing; broadcast sowing
Abstract | View details | Full text in PDF | Author Info

The study deals with the interaction of various soil preparation and reforestation methods. The most favourable time of the year for broadcast sowing and the effect of stabilization after soil preparation on restocking were studied as special problems.

Prescribed burning, scalping and disc ploughing made a better combination with sowing than planting, and ploughing better combination with planting than sowing. The longer the period was between sowing and germination the fewer seedlings emerged. The best stocking was clearly resulted with sowing in June. Stabilization of soil after preparation had a negative effect on reforestation results.

The PDF includes a summary in English.

  • Pohtila, E-mail: ep@mm.unknown (email)
  • Pohjola, E-mail: tp@mm.unknown
article id 5198, category Article
Leo Heikurainen, Jukka Laine, Jarmo Lepola. (1983). Lannoitus- ja sarkaleveyskokeita karujen rämeiden uudistamisessa ja taimikoiden kasvatuksessa. Silva Fennica vol. 17 no. 4 article id 5198. https://doi.org/10.14214/sf.a15181
English title: Fertilization and ditch spacing experiments concerned with regeneration and growth of young Scots pine stands on nutrient poor pine bogs.
Original keywords: mänty; luontainen uudistaminen; istutus; uudistaminen; lannoitus; ojitetut suot; taimikot; pituuskasvu; sarkaleveys
English keywords: Pinus sylvestris; fertilization; regeneration; natural regeneration; drained peatlands; Scots pine; height growth; planting; ditch spacing
Abstract | View details | Full text in PDF | Author Info

The effects of variations in the intensity of drainage and NPK fertilization on the natural regeneration and planting results and the subsequent development of seedling stands under various climatic conditions on drained nutrient poor pine bogs was investigated in a 16-year-old study.

Comparison of height development of Scots pine (Pinus sylvestris L.) stands on drained peatlands to that of pine stands growing in mineral soil sites show that in Southern Finland the most efficient forest improvement measures (10 m ditch spacing and 1,000 kg/ha NPK-fertilization) resulted in growth that corresponds a to a height index of a stand in a Vaccinium type site. Less efficient treatment (30 m ditch spacing and no fertilizer) resulted in growth corresponding the development of young stand in a Calluna type site. In Northern Finland the effect of fertilization on height growth was almost negligible. This is possibly due to a decrease in the nitrogen mobilization from south to north of Finland. Thus, it seems evident that fertilization of young Scots pine stands on nutrient poor drained peatlands can be recommended only in the southern part of the country.

The effect of ditch spacing is same in the whole country. The narrower the spacing the better the height growth. In the south planted stands thrive better than naturally regenerated stands, but the situation is reversed in the north.

The PDF includes a summary in English.

  • Heikurainen, E-mail: lh@mm.unknown (email)
  • Laine, E-mail: jl@mm.unknown
  • Lepola, E-mail: jl@mm.unknown
article id 5188, category Article
Eljas Pohtila, Tapani Pohjola. (1983). Vuosina 1970-1972 Lappiin perustetun aurattujen alueiden viljelykokeen tulokset. Silva Fennica vol. 17 no. 3 article id 5188. https://doi.org/10.14214/sf.a15171
English title: Results from the reforestation experiment on ploughed sites established in Finnish Lapland during 1970–1972.
Original keywords: kuusi; kylvö; mänty; istutus; maanmuokkaus; Lappi; uudistaminen; kuolleisuus; rauduskoivu; siperianlehtikuusi; auraus
English keywords: Pinus sylvestris; Norway spruce; Betula pendula; Picea abies; regeneration; soil preparation; Scots pine; silver birch; planting; ploughing; Lapland; mortality; Siberian larch; sowing; Larix sibirica
Abstract | View details | Full text in PDF | Author Info

The objective of the study was to compare different reforestation methods on ploughed areas in Finnish Lapland. Four species were compared: Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.), silver birch (Betula pendula Roth) and Siberian larch (Larix sibirica Ledeb.). The experiments were established in different parts of Lapland on different types of sites in 1970–72.

In Scots pine there was a difference of 15 percentage points in survival of seedlings between the best and worst methods of regeneration. Containerized seedlings and paper pot seedlings had the best survival rates. In Norway spruce the respective difference between sowing and planting was about 20 percentage points. In favour of planting. The survival rate can be increased by about 20 percentage points by selecting the right tree species. The average height varied from 25 cm (the sowed Norway spruce) to 179 cm (the planted silver birch) after 10 growing seasons. The birch was planted at the most fertile sites only. The longer time passed from the afforestation the clearer was the effect of the local growing conditions on the development of the seedlings. The elevation of the site was one factor seemed to influence the success of the seedlings.

The PDF includes a summary in English.

  • Pohtila, E-mail: ep@mm.unknown (email)
  • Pohjola, E-mail: tp@mm.unknown
article id 5122, category Article
H. Smolander, J. Kostamo, P. K. Räsänen. (1981). Maan tiiviyden vaikutus männyntaimien haihduntaan ja pituuskasvuun istutuksen jälkeen. Silva Fennica vol. 15 no. 3 article id 5122. https://doi.org/10.14214/sf.a15063
English title: Effect of soil compaction on transpiration and height increment of planted Scots pine seedlings.
Original keywords: mänty; istutus; metsämaa; maan rakenne; tiivistyminen
English keywords: Pinus sylvestris; Scots pine; planting; forest soil; compactment
Abstract | View details | Full text in PDF | Author Info

The effect of soil compaction on transpiration and height increment of Scots pine (Pinus sylvestris L.) seedlings following planting out were investigated in a small-scale pot experiment. Compacted and loosely-packed fine sand and fine-sand moraine were used as the planting substrates. The compacted soils used corresponded to the normal type of soil to be found in tilled forest soils in Finland. The effect of soil compaction on seedling transpiration during water stress was also studied in a separate experiment.

Seedlings planted in compact soil had a higher rate of transpiration than those in loosely-packed soil. The recovery in transpiration, which started halfway through the growing season, was faster, however, in the seedlings planted in loosely-packed soil. Under conditions of water stress, the seedlings planted in compact fine-sand moraine started to reduce the transpiration rate at higher soil moisture values than those planted in loosely-packed soil. No corresponding difference was observed for fine sand. Compaction was not found to affect the overall height growth, but it did at certain time during the growing season.

The PDF includes a summary in English.

  • Smolander, E-mail: hs@mm.unknown (email)
  • Kostamo, E-mail: jk@mm.unknown
  • Räsänen, E-mail: pr@mm.unknown
article id 4954, category Article
Carl Johan Westman. (1976). Fertilization of Scots pine seedlings with different nitrogen fertilizer. Silva Fennica vol. 10 no. 4 article id 4954. https://doi.org/10.14214/sf.a14800
Original keywords: mänty; istutus; kasvu; taimet; lannoitus; kuolleisuus; typpilannoitus; ammoniumsulfaatti
English keywords: Pinus sylvestris; Scots pine; planting; growth; mortality; seedlings; fertilizing; nitrogen fertilizers; ammonium sulphate
Abstract | View details | Full text in PDF | Author Info

The paper describes an attempt to determine whether ammonium, nitrate and urea nitrogen are bound in peat used as a filling material in containerized seedling production, what is the effect of the nutrients on certain chemical properties in the peat, and what is the effect of the nitrogen fertilizers on the primary growth of containerized (paper-pot VH 608) Scots pine (Pinus sylvestris L.) seedlings in connection with planting out. The seedlings were fertilized with ammonium sulphate, potassium nitrate and urea.

The results show that none of the fertilizers used were bound in the peat. The nitrogen content in the above ground part of the seedlings increased clearly. Fertilization with ammonium sulphate resulted in the greatest increment and this increase appears to be permanent. The wintering process was somewhat delayed by the fertilization. The seedling mortality rate for all the treatments has been quite appreciable. However, fertilization particularly with ammonium sulphate on the poorer of the two sites studied has had a positive effect on seedling survival. Furthermore, it appears that fertilizer treatments have decreased growth after planting, but in the case of ammonium sulphate this decrease has changed into a clear growth increment.

The PDF includes a summary in English.

  • Westman, E-mail: cw@mm.unknown (email)
article id 4876, category Article
Tapio Lehtiniemi, Juhani Sarasto. (1973). Kokemuksia rauduksen istutuksesta ojitetuille soille. Silva Fennica vol. 7 no. 1 article id 4876. https://doi.org/10.14214/sf.a14706
English title: Betula verrucosa plantations on peat.
Original keywords: taimet; turvemaat; uudistaminen; ojitetut suot; kuolleisuus; rauduskoivu; ravinnetasapaino
English keywords: Betula pendula; regeneration; drained peatlands; planting; nutrient deficiency; mortality; seedlings; Betula verrucosa; Godronia multispora
Abstract | View details | Full text in PDF | Author Info

The aim of the present study was to assess whether two-year old Betula verrucosa Ehrh. (now Betula pendula Roth.) transplants can be used in afforestation of drained peatlands and what factors affect the development of the young trees. The seedlings were planted in 1967. The site was repair planted next spring due to mortality caused by a undefined fungal disease, and the plantations were fertilized with NPK fertilizer (soil application. The seedlings were measured twice a year until the autumn 1970.

Only 28% of the original transplants, and 73.4% of the repair plantations were alive in 1970. In some cases, fertilization improved the results, while in others it was detrimental to the trees or had no effect on survival. According to peat analysis, the poor survival and development of the plants could be due to the too high ratios of N/Ca and N/P. Stunted or dead trees displayed often necrosis caused by Godronia multispora. According to the experiences, Betula verrucosa plantations are inferior to those obtained with Scots pine (Pinus sylvestris L.). In addition, the results indicate that in old draining areas calcium and phosphorus are often too low in comparison to nitrogen.

The PDF includes a summary in English.

  • Lehtiniemi, E-mail: tl@mm.unknown (email)
  • Sarasto, E-mail: js@mm.unknown
article id 4859, category Article
Eljas Pohtila. (1972). Istutuskuoppaan annetun kuparihienofosfaatin vaikutus männyn ja kuusen taimien elossapysymiseen ja pituuskasvuun eräällä kulotetulla ja auratulla uudistusalalla Koillis-Suomessa. Silva Fennica vol. 6 no. 1 article id 4859. https://doi.org/10.14214/sf.a14662
English title: Effect of fine-grounded copper rock phosphate placed in the planting hole on the survival and height growth of Scots pine and Norway spruce in a burnt and furrowed reforestation are in northeast Finland.
Original keywords: kuusi; mänty; metsänviljely; taimet; lannoitus; kuolleisuus; pituuskasvu; fosforilannoitus
English keywords: Pinus sylvestris; Norway spruce; fertilization; Picea abies; Scots pine; height growth; planting; phosphorus; mortality; copper; seedlings
Abstract | View details | Full text in PDF | Author Info

The paper describes the results of a fertilization experiment, in which transplants of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) were fertilized with various doses of fine-ground copper rock phosphate (33% P2O5, 4% Cu) placed direct in the planting hole. The experiment was made in northeast Finland on a clear-cut, burnt-over and furrowed moraine heath. The fertilization increased especially the survival and condition of the Scots pines and increased to some extent also the height growth of the plants. The spruce survived better than the pines.

The PDF includes a summary in English

  • Pohtila, E-mail: ep@mm.unknown (email)
article id 4853, category Article
Olavi Luukkanen, Pentti K. Räsänen, Paavo Yli-Vakkuri. (1971). Neulasten väri myöhemmän kasvun ja lannoitusvaikutuksen ilmaisijana. Silva Fennica vol. 5 no. 4 article id 4853. https://doi.org/10.14214/sf.a14655
English title: The use of needle colour in predicting growth and response to fertilization.
Original keywords: kuusi; mänty; kasvu; taimet; lannoitus; neulaset
English keywords: Pinus sylvestris; Norway spruce; Picea abies; Scots pine; planting; growth; seedlings; needle clour
Abstract | View details | Full text in PDF | Author Info

About 4,000 seedlings of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) were planted in 1965 both on a clear-cut and sheltered area in Central Finland. In the autumn of 1966 needle colour was determined by using Muncell Color Charts which allowed a quantitative measurement of three colour dimensions (hue, value, and chroma). Terminal shoot growth was recorded for two years after colour measurements. In both species, fertilization (NPK in the spring of the year of colour measurement) as well as other site factors caused differences in all three dimensions of needle colour. A regression of shoot growth on needle colour was found in both species. In most cases colour value (darkness) and, in spruce, also chroma, predicted the subsequent growth almost as well as did these two-colour variables together.

The PDF includes a summary in English.

  • Luukkanen, E-mail: ol@mm.unknown (email)
  • Räsänen, E-mail: pr@mm.unknown
  • Yli-Vakkuri, E-mail: py@mm.unknown
article id 4849, category Article
Pentti K. Räsänen, Tapani Hänninen. (1971). Eräiden talvivarastointimenetelmien vaikutuksesta männyn taimiin. Silva Fennica vol. 5 no. 3 article id 4849. https://doi.org/10.14214/sf.a14651
English title: The effect of some over-winter storage methods on different Scots pine nursery stock.
Original keywords: mänty; taimet; varastointi; talvivarastointi; kuolleisuus; kylmävarastointi
English keywords: Pinus sylvestris; Scots pine; planting; mortality; seedlings; cold storage; winter storage
Abstract | View details | Full text in PDF | Author Info

Seedlings of three different Scots pine (Pinus sylvestris L.) nursery stock, 1+0 ,1+1, and 2+0, were kept over the winter, after they had been packed in polythene bags, in three different ways: 1) In a refrigerated storage room, 2) in a wooden crate in the ground, 3) submerged in a lake. The seedling to which they were to be compared with were left over the winter in a nursery bed. The 1,800 seedlings were planted out in the spring 1966 in 15 random blocks. Their development was scrutinized during the three subsequent falls.

The seedlings which had been stored in the lake all died. The seedlings which had been stored along the 1st and 2nd method, managed almost as well as the ones which had been kept over the winter in the nursery bed, except for those of 1+0 stock.

The PDF includes a summary in English.

  • Räsänen, E-mail: pr@mm.unknown (email)
  • Hänninen, E-mail: th@mm.unknown
article id 4847, category Article
Pentti K. Räsänen, Matti Hiltunen. (1971). Männyn erilaisten taimierien istutuskelpoisuudesta. Silva Fennica vol. 5 no. 3 article id 4847. https://doi.org/10.14214/sf.a14649
English title: The effect of differences in Scots pine nursery stock on the field survival and growth.
Original keywords: mänty; metsänviljely; istutus; kasvu; taimet; varastointi; kastelu; kuolelisuus
English keywords: Pinus sylvestris; Scots pine; planting; growth; mortality; storage; seedlings; watering
Abstract | View details | Full text in PDF | Author Info

Scots pine (Pinus sylvestris L.) seedlings were stored for five days in an ordinary wood shed. One half of the seedlings were planted out directly, and another half after soaking the roots of the seedlings for 3–6 hours in water to compensate the possible water deficit developed. According to the results of the experiment, the effect of watering was extremely small. The difference observed, which was in favour of the trees that had been watered during storage, was discernible only in the needle length and in the number of lateral buds; in mortality or in the growth of the seedlings no difference could be observed.

The PDF includes a summary in English.

  • Räsänen, E-mail: pr@mm.unknown (email)
  • Hiltunen, E-mail: mh@mm.unknown
article id 4813, category Article
Bo Långström. (1970). Pakkaustapojen vaikutuksesta talvivarastoitujen männyn taimien istutukseen. Silva Fennica vol. 4 no. 1 article id 4813. https://doi.org/10.14214/sf.a14602
English title: The effect of packing methods on the field survival and growth of winter-stored plants of Scots pine.
Original keywords: mänty; metsänviljely; istutus; kasvu; taimet; kylmävarasto; talvivarastointi; kuolleisuus; tukkimiehentäi; torjunta-aine
English keywords: Pinus sylvestris; nursery; Scots pine; planting; seedlings; cold storage; winter storage; Hylobious abietis; large pine weevil; insecticide; field survival; packing methods
Abstract | View details | Full text in PDF | Author Info

The aim of the study was to investigate the effect of four packing methods on the field survival and growth of seedlings and transplants of Scots pine (Pinus sylvestris L.) stored over the winter in a cold-storage cellar. The following sorts of plants were used: one-year-old seedlings (1+0) grown in a plastic greenhouse, two-year-old (2+0) open grown seedlings and three-year-old open grown transplants. These plants were stored in open wooden boxes, in sealed plastic bags, in boxes with wet peat on the bottom and in plastic-laminated paper bags.

The control plants were of the same types and were kept in a nursery over the winter. The storage was carried out in a mantle-chilled cold-storage from October 1966 to May 1967. The temperature in the cold-storage was kept around -2 °C and the relative humidity of the air over 90%. The water content of a randomly selected sample plants showed no increase in water deficit after the storing. Part of the seedlings were transplanted in the nursery and the rest were planted in a clear-cut area. A number of the latter plants were treated with an insecticide (1% Intaktol, which contains DDT, Lindane and dieldrin) before planting. All the experiments were examined after one growing season and the planting experiments the next fall.

The transplants (2+1) in the nursery, and in the forest had survived and grown better than the seedlings. In the nursery the 1+0 seedlings survived and grew better than the 2+0 seedlings. There was no difference in mortality between the seedlings. After the first growing season occasional significant differences between the packing methods were observed, but they disappeared during the second growing season. Thus, all packing methods proved to be as successful as the control method without winter storage.

Transplants were more often attacked by the large pine weevil (Hylobius abietis L.) than the smaller seedlings. The damage, however, was considerably greater on the seedlings because of their lower resistance. No significant differences in the Hylobius-attack between the packing methods could be observed. The Intaktol-treated plants were as often attacked as the untreated ones, but the damage was slighter on the treated ones.

The PDF includes a summary in English.

  • Långström, E-mail: bl@mm.unknown (email)
article id 4812, category Article
Pentti K. Räsänen, Aarno Koukkula, Paavo Yli-Vakkuri. (1970). Pakkauksen, varastoimisen ja valeistutuksen vaikutus männyn taimien istutuskelpoisuuteen. Silva Fennica vol. 4 no. 1 article id 4812. https://doi.org/10.14214/sf.a14601
English title: The effect of packing, storing and heeling-in on the field survival and growth of Scots pine seedlings.
Original keywords: mänty; metsänviljely; istutus; metsäpuun taimet; taimet; varastointi; kuolleisuus; kastelu; tukkimiehentäi
English keywords: Pinus sylvestris; Scots pine; planting; mortality; storage; Hylobius abietis; seedlings; large pine weevil; insecticide; field survival
Abstract | View details | Full text in PDF | Author Info

The aim of the present study was to establish, by means of planting experiments, the influence of different packing, heeling-in and watering as well as the length of the storage period on the development of Scots pine (Pinus sylvestris L.) seedlings, in all 2,090 seedlings, that had been lifted from the nursery bed in spring. The plants were packed in bundles and into plastic sacks in 1965 (6 storage methods) and in 1966 (3 storage methods). Control seedlings were planted without storing at the time when storage of the test material begun. The plantations were followed 3–4 years.

Storage for two weeks in the different ways and planting without storage gave similar results when seedling survival was compared. Storage in plastic sack proved to be as good as storage in bundles in a cellar, and healing-in in moist soil or in a drain were both usable methods. Watering the seedlings did not improve the results, which indicates that the storage caused no serious lack of water.

After four growing seasons an average of 19,6% of the seedlings of the 1965 experiment died, the bulk of them by the end of the first growing season. Despite control treatment, Hylobious abietis caused serious damages. In the plantations of the year 1966 mortality of the seedlings was under 5% by the end of third growing season. During the first two growing seasons after planting differences in growth of the seedlings stored in different ways could be observed in the plantations of the year 1965, but the differences levelled out later. In the plantations established in 1966 no differences in growth occurred.

The PDF includes a summary in English.

  • Räsänen, E-mail: pr@mm.unknown (email)
  • Koukkula, E-mail: ak@mm.unknown
  • Yli-Vakkuri, E-mail: py@mm.unknown
article id 4769, category Article
Paavo Yli-Vakkuri, Aimo Autio, Juhani Vehkaoja. (1968). Päätehakkuun ja metsänviljelyn välinen aika. Silva Fennica vol. 2 no. 3 article id 4769. https://doi.org/10.14214/sf.a14554
English title: Time lag between final cutting and regeneration.
Original keywords: kylvö; metsänviljely; istutus; uudistaminen; uudistusaika; istutusrästit; viivästys
English keywords: planting; final felling; sowing; artificial regeneration; seeding; time lag
Abstract | View details | Full text in PDF | Author Info

The time interval between final felling and plantation means a waste of time and thus a production loss, and may lead to lush growth of ground cover and hardwood sprouts, which increases expenses in forest management. The objective of this study was to determine the length of time between final felling and artificial regeneration in private forests in the forest districts of Uusimaa-Häme in Southern Finland and Pohjois-Häme in Central Finland. The material consists of a sample of 150 plans of the 952 cutting and regeneration plans in the district of Uusimaa-Häme and a sample of 140 plans of the 1,102 plans in Pohjois-Häme.

The time lag between final cutting and seeding or planting was on average 1.4 years in Pohjois-Häme district and 0.7 years in Uusimaa-Häme. In the latter district, 56% of the logged area was regenerated in the spring immediately following the cutting, and 84% not later than in the second spring. In Pohjois-Häme, 29% of the harvested area was regenerated immediately in the first spring following cutting, and 79% not later than in the third spring following cutting.

In Pohjois-Häme, the interval was shortest in the smallest forest holdings, and longest in the largest holdings with the largest regeneration areas. The length seems to depend mainly on the size of the regeneration area. In Uusimaa-Häme district, the interval was shortest in the smallest holdings, rather short in the largest, and longest in the intermediate-size forest properties. Seeding with Scots pine (Pinus sylvestris L.) was used in almost all regeneration areas.

The forest owners had mainly carried out the regeneration work themselves. In the Pohjois-Häme area, the interval was shorter when the district forestry board regenerated the area. 35% of the regenerated areas had required supplementary planting in Pohjois-Häme, and 47% in the Uusimaa-Häme area. Supplementary planting was more common in areas regenerated later after the cutting. In Pohjois-Häme, according to the reports of the forest owners, 75% of the regenerated areas required tending during the first three years, in Uusimaa-Häme, 80%.

The PDF includes a summary in English.

  • Yli-Vakkuri, E-mail: py@mm.unknown (email)
  • Autio, E-mail: aa@mm.unknown
  • Vehkaoja, E-mail: jv@mm.unknown
article id 4764, category Article
Juhani Päivänen. (1968). Istutusajankohdan vaikutus männyn istutuksen onnistumiseen ojitetuilla avosoilla. Silva Fennica vol. 2 no. 2 article id 4764. https://doi.org/10.14214/sf.a14549
English title: The effect of the date of planting on the survival of Scots pine on drained open peatlands in Finland.
Original keywords: mänty; istutus; metsitys; ojitusalueet; turvekankaat; istutusaika; avosuot; syysistutus
English keywords: Pinus sylvestris; afforestation; drained peatlands; Scots pine; planting; time of planting; autumn planting; open peatlands
Abstract | View details | Full text in PDF | Author Info

Due to mechanization of draining of peatlands, also open peatlands have been included in the draining projects due to technical reasons. Some research has been published on afforestation of open drained peatlands, but there is yet no experiments that reaches the entire development of the stands. The purpose of this paper is to discuss the possibility of extending the planting season of Scots pine (Pinus sylvestris L.) over the entire growing season in drained peatlands, where the water condition of the site is probably not the factor limiting forest development. An open low-sedge swamps in Southern Finland were planted in early summer and two weeks in midsummer in 1967.

In the light of the results, planting Scots pine would seem possible in drained peatlands throughout the growing season. However, plants may suffer considerably from lifting for the plantation in August. The success of planting at the turn of September and October is also uncertain. The nursery must be situated close to the areas to be planted, since the transportation and handling of plants during the growing season must be carried out with extreme care. The seasonality of planting work could be decreased by extending the planting season. In the future, several transplant storing methods should be tried out in connection with similar planting-time experiments.

The PDF includes a summary in English.

  • Päivänen, E-mail: jp@mm.unknown (email)
article id 4731, category Article
Leo Heikurainen, Juhani Päivänen, Kustaa Seppälä. (1966). Koetuloksia männyn kylvöstä ja istutuksesta ojitetuilla soilla. Silva Fennica no. 119 article id 4731. https://doi.org/10.14214/sf.a14289
English title: Scots pine seeding and planting on drained peat soils.
Original keywords: kylvö; mänty; istutus; uudistaminen; lannoitus; turvekankaat; ojitetut suot
English keywords: Pinus sylvestris; fertilization; regeneration; Scots pine; planting; sowing; artificial regeneration; seeding
Abstract | View details | Full text in PDF | Author Info

This paper describes the preliminary results of Scots pine (Pinus sylvestris L.) seeding and planting trials on drained peat soils.

The results showed that a perpared peat surface was a better surface for seeding than the unprepared one. Planting of 2+1-year seedlings succeeded better than planting 1-year seedlings. Planting on the turf gave better survival than planting on the unprepared soil surface. The whole growing season was suitable time for planting Scots pine seedlings except May when the peat soil under the surface was still frozen.

Using fertilizers in connection with planting was surveyed in two ways. Mortality of seedlings increased when they were top-dressed with NPK fertilizer. Using a so-called spot fertilizing with several combinations of fertilizers resulted in K and N tending to increase the mortality of seedlings, but P decreasing mortality.

The PDF includes a summary in English.

  • Heikurainen, E-mail: lh@mm.unknown (email)
  • Päivänen, E-mail: jp@mm.unknown
  • Seppälä, E-mail: ks@mm.unknown
article id 4693, category Article
Martti Nenonen, Juhani Jukola. (1960). Tukkimiehen täin (Hylobius abietis L.) tuhoista mäntytaimistoissa ja niiden torjunnasta DDT :n avulla. Silva Fennica no. 104 article id 4693. https://doi.org/10.14214/sf.a9132
English title: Pine weevil (Hylobius abietis L.) injuries and their control by DDT in Scots pine seedling stands.
Keywords: Pinus sylvestris; soil preparation; Scots pine; planting; Hylobius abietis; insecticides; seedling damages; insect damages; DDT
Abstract | View details | Full text in PDF | Author Info

The aim of the study was to find out more about pine weevil (Hylobious abietis L.) injuries in Scots pine (Pinus sylvestris L.) seedling stands and their control by means of DDT. For this purpose, inventories were made of seedling stands established earlier. Control experiments were made on burnt areas by planting seedlings dipped in a DDT emulsion.

The results of the inventories show that injuries caused by pine weevils can, in certain circumstances, especially in seedling stands established by planting, cause the complete failure in artificial regeneration. The extent and quality of the injuries vary greatly according to planting method, treatment of the cutting area, age of the seedling stand, environmental factors, and weather conditions. The most extensive injuries occur in regeneration areas of old Norway spruce stands burnt after clear cutting and planted with Scots pine seedlings. Injuries are greater in seedling stands established by planting, especially after broadcast burning, than in seedling stands originating either from artificial or natural seeding. The quality of the patch for sowing or planting has a considerable effect on the quantity and character of the injuries: in a patch from which organic matter has been removed, injuries do not appear or they are slighter. Seedlings can be protected effectively and economically by dipping their tops up to the root collar, in a DDT emulsion before planting.

The PDF includes a summary in English.

  • Nenonen, E-mail: mn@mm.unknown (email)
  • Jukola, E-mail: jj@mm.unknown
article id 4568, category Article
Atri S. Arimo. (1939). Paloalojen metsittämisestä. Silva Fennica no. 52 article id 4568. https://doi.org/10.14214/sf.a13975
English title: Forest regenration of burned areas.
Original keywords: metsäopetus; kylvö; metsänviljely; metsänhoitajien jatkokurssit; kulotus; metsäpalo; jatkokoulutus; metsänuudistaminen; kulo
English keywords: regeneration; planting; forest fire; forest education; sowing; professional development courses
Abstract | View details | Full text in PDF | Author Info

Silva Fennica issue 52 includes presentations held in professional development courses, arranged for foresters working in public administration in 1938. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes preparation and forest regeneration methods of a burned area.

  • Arimo, E-mail: aa@mm.unknown (email)
article id 4542, category Article
Erkki Laitakari. (1938). Eräitä metsän uudistamisessa huomioon otettavia näkökohtia. Silva Fennica no. 46 article id 4542. https://doi.org/10.14214/sf.a13951
English title: Forest regeneration.
Original keywords: metsäopetus; metsänviljely; metsänhoitajien jatkokurssit; luontainen uudistaminen; metsänuudistaminen
English keywords: natural regeneration; planting; forest education; professional development courses; articifial regeneration
Abstract | View details | Full text in PDF | Author Info

Silva Fennica issue 46 includes presentations held in professional development courses, arranged for foresters working in public administration in 1937. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service. 

This presentation describes factors that should be taken into account in forest regeneration. 

  • Laitakari, E-mail: el@mm.unknown (email)
article id 4502, category Article
V. K. Ahola. (1937). Havaintoja viimeaikaisista metsänhoitotöistä valtionmetsissä. Silva Fennica no. 39 article id 4502. https://doi.org/10.14214/sf.a13912
English title: Observations on forest management work in state forests.
Original keywords: metsänhoito; metsäopetus; kylvö; valtion metsät; metsätyö; metsänhoitajien jatkokurssit; istutus; kasvatushakkuu; taimikon perkaus; kulotus
English keywords: forest management; silviculture; planting; forest education; state forests; sowing; forest work; professional development courses; cleaning of sapling stand; broadcast burning
Abstract | View details | Full text in PDF | Author Info

The issue 39 of Silva Fennica includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level.

This presentation describes the forest management work in the state forests.

  • Ahola, E-mail: va@mm.unknown (email)
article id 4492, category Article
V. K. Ahola. (1937). Metsän keinollisesta uudistamisesta. Silva Fennica no. 39 article id 4492. https://doi.org/10.14214/sf.a13902
English title: Artificial regeneration of forests.
Original keywords: metsäopetus; kylvö; metsänhoitajien jatkokurssit; metsän uudistaminen; istutus
English keywords: planting; forest regeneration; forest education; sowing; professional development courses
Abstract | View details | Full text in PDF | Author Info

Silva Fennica Issue 39 includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level.

 This presentation describes the methods of artificial regeneration of forests.

  • Ahola, E-mail: va@mm.unknown (email)
article id 4463, category Article
Erkki K. Cajander. (1932). Tietoja metsänviljelystoiminnasta Suomessa 1923-1930. Silva Fennica no. 22 article id 4463. https://doi.org/10.14214/sf.a9019
English title: Artificial forest regeneration in Finland in 1923-1930.
Original keywords: metsänparannus; metsänhoito; metsänistutus; kylvö; valtion metsät; yksityismetsät
English keywords: forest management; planting; state forests; private forests; forest improvement; sowing
Abstract | View details | Full text in PDF | Author Info

The article is a review on early forest regeneration and management in Finland. Beginning of the 1900s marks change in attitudes and resources for forest management. The state increased the funding of forest regeneration and improvement in the state forests in 1928. State funding is directed also to forest improvement in the private forests, and organizations established to promote forest management in the private forests are reorganized. For instance, District Forestry Boards were appointed the forest improvement work in private lands, in addition to promotion of private forestry. Sowing increased in the state forests from 772 ha to 1,566 ha, in forests of the forest companies from 3,006 ha to 4,954, and in private forests from 1,417 ha to 1,566 ha in 1923-1926. The figures of private forests are, however, incomplete. The most usual methods are patch sowing and broadcast sowing on snow. Seeds used in sowing increased from 3,357 kg to 14,387 kg, and planting from 413 ha to 1,020 ha in 1923-1930. Almost half of the sown areas were in the state forests, and most of the planted area in the forests of the companies. Scots pine (Pinus sylvestris L.) was the main tree species in artificial regeneration, and Norway spruce (Picea abies (L.) H. Karst.) was more popular in planting.

The PDF includes a summary in German.

  • Cajander, E-mail: ec@mm.unknown (email)
article id 4458, category Article
Esko Kangas. (1931). Siikakankaan mäntytaimistojen tuhoista. Silva Fennica no. 17 article id 4458. https://doi.org/10.14214/sf.a8999
Keywords: seedling damage; planting; seedling stand; insect damage; fungal diseases; sowing
Abstract | View details | Full text in PDF | Author Info

Regeneration of large open areas in dry mineral soil forest sites that usually grow Scots pine (Pinus sylvestris L.) have several problems. For instance, soil frost, snow, ground vegetation and dryness can prevent germination and growth of seedlings. The damages caused by insects and fungi in seedlings of a large burned area in Siikakangas in Southern Finland was studied. A forest fire burned the area nearly completely in 1909, and 310 hectares have been sowed or planted with mostly Scots pine during the following years. Minor areas have been regenerated with Pinus montana Noll, Pinus excelsa Lamb., Pinus murrayana Balf. and Larix sibirica Ledeb.

No completely healthy pine seedling stands could be found in the area. About 41% of the seedlings in the sample plots were damaged. The most common causes for damage were Evetria resinella (now Retinia resinella L.), Luperus pinicola (now Calomicrus pinicola (Duft.)), Pissodes notatus (now Pissodes castaneus Degeer), Evetria turionana Hb. and Hylobious abietis L. The most usual fungal disease was Lophodermium sp. Evetria resinella caused damages in all the area. Evetria turionana, Pissodes notatus and Hylobius abietina were found in the older seedling stands. Other damages were more localized. The slacks in the terrain seemed to have most damages, the original cause being probably soil frost. Some damages, as Lophodermium, were related to the density of the seedlings, especially in the sown areas. Cleaning of seedling stands could decrease these damages. Planting seems to have succeeded better than patch sowing.

The PDF includes a summary in German.

  • Kangas, E-mail: ek@mm.unknown (email)

Category : Article

article id 7178, category Article
Matti Keltikangas, Pekka Tiililä. (1968). Koivun ja kuusen istutuksen keskinäinen edullisuusjärjestys käenkaali-mustikkatyypin metsämailla. Acta Forestalia Fennica vol. 82 no. 5 article id 7178. https://doi.org/10.14214/aff.7178
English title: The economic sequence of silver birch (Betula pendula) and Norway spruce (Picea abies) when planting Oxalis-Myrtillus type forest land.
Original keywords: kuusi; kannattavuus; koivu; istutusmetsikkö; puulajivalinta; tuottotaulukot
English keywords: Norway spruce; Betula pendula; Picea abies; silver birch; planting; profitability; artificial regeneration; yield tables; choise of tree species
Abstract | View details | Full text in PDF | Author Info

The present study proposes to calculate the economic sequence of two of Finland’s three main tree species, Norway spruce (Picea abies (L.) H. Karst.) and silver birch (Betula pendula Roth) when planted on Oxalias-Myrtillus type sites where both species are equally suitable, on biological grounds. In addition, the accuracy and applicability of the present Finnish yield tables to an economic comparison is tested. Benefit/cost ratio was selected as criterion of profitableness. All future net incomes and costs were discounted into the planting time and added together. The ratio between the discounted net revenues and the discounted investment costs (later called profit ratio) was the criterion. There is no reliable method to forecast the future wood prices, therefore two price ratios, birch veneer timber to spruce pulpwood and birch cordwood to spruce pulpwood, were chosen as free variables. The economic sequence of the tree species was determined as the function of these variables.

The main conclusions are, first, that under the present price ratios spruce appears to be the better choice for the forest owner, and the most promising policy for changing the situation seems to decrease the production costs of plants in birch nurseries. Second, the present Finnish yield tables are not consistent or accurate enough to enable any sufficiently reliable economic comparisons of tree species in artificial regeneration. The possible error of difference between two rather uncertain estimates is big. More work is needed to construct a uniform system of yield tables covering all main tree species, all site types, all macro climate conditions and all types of regeneration.

The PDF includes a summary in English.

  • Keltikangas, E-mail: mk@mm.unknown (email)
  • Tiililä, E-mail: pt@mm.unknown
article id 7421, category Article
Olli Heikinheimo. (1954). Taimitarhan maantieteellinen sijainti, siemenen alkuperä ja istutuskaudet. Acta Forestalia Fennica vol. 61 no. 9 article id 7421. https://doi.org/10.14214/aff.7421
English title: Geographical location of a tree nursery, seed origin and planting seasons.
Original keywords: taimitarha; taimituotanto; istutus; alkuperä; istutusaika; siemenet; siemenen alkuperä; istutuskausi
English keywords: planting; seedling production; seeds; provenience; tree nursery; planting time
Abstract | View details | Full text in PDF | Author Info

Planning of large central tree nurseries, which has become topical in Finland, means that the seedlings will be used in a wide geographical area. The nursery must decide which proveniences of seeds of the different tree species it will use. This concerns also the customer that buys the seedlings. The planting and lifting of the seedlings in the nursery have to be timed so that the seedlings are in a right state of growth at the time of planting.

The growth of the seedlings can, under certain conditions, be promoted by using a slightly southerly seed provenience, and large-sized seeds. There are, however, limitations to how much the seeds can be transferred northwards. If the nursery lies much south of the planting site, the seedlings have started height growth at the time of planting. This applies especially larch (Larix sp.), Scots pine (Pinus sylvestris L.) and birch (Betula sp.), but affects less Norway spruce (Picea abies (L.) Karst.). The problem can be handled by using a cool storage space for the seedlings waiting for a delivery in the nursery.

According to an international study, seedlings grown from seeds collected in countries south from Finland usually die already during the first two years in the nursery. Within Finland the seeds can be transferred at least by two latitudes. Spruce seems to tolerate longer transfer. Seed orchards should be planted south of the seed’s origin to ensure better yield and better quality seeds.

The Silva Fennica issue 61 was published in honour of professor Eino Saari‘s 60th birthday.
The PDF includes a summary in German.

  • Heikinheimo, E-mail: oh@mm.unknown (email)
article id 7281, category Article
Emil Vesterinen. (1934). Sotilaiden osanotto metsänviljelystyöhön. Acta Forestalia Fennica vol. 40 no. 4 article id 7281. https://doi.org/10.14214/aff.7281
English title: The participation of troops in silvicultural work.
Original keywords: kylvö; metsätyö; istutus; armeija; sotilas
English keywords: planting; sowing; forest work; army; solder
Abstract | View details | Full text in PDF | Author Info

Following the example of Norway, which was the first nation to employ regular troops in silvicultural work, sowing and planting courses were organized for the Finnish troops in 1931. The initiative was taken by the Forestry Instruction Bureau, and the work was organized by the forestry committees. During three years, total of 8,189 men was involved in the work.

The PDF includes a summary in English.

  • Vesterinen, E-mail: ev@mm.unknown (email)
article id 7632, category Article
Pekka Kauppi. (1984). Stress, strain, and injury : Scots pine transplants from lifting to acclimation on the planting site. Acta Forestalia Fennica no. 185 article id 7632. https://doi.org/10.14214/aff.7632
Keywords: Pinus sylvestris; Scots pine; planting; seedlings; root desiccation
Abstract | View details | Full text in PDF | Author Info

This paper is the final report of a study on the damage of tree transplants induced before the trees are planted in the field. The injury development is viewed as a transient rather than a ”step-like” process. The main objective of the study is to develop concepts and methods for recognizing and analysing the dynamic aspects of that process. The report consists of three parts: i) characterization of the environments to which the plants are exposed, ii) theoretical part of model development, and iii) experiments with bare-rooted Scots pine (Pinus sylvestris L.) transplants in which the model was applied.

The results of the first part indicate fast temporal variation of the environmental stress factors, and a slow response of the plant in terms of visible injury symptoms. A model is developed in the second part of the paper for analysing the relationship between the fast stress variables and the slow injury variables. The model is employed in the third part of the study for developing experiments in which the transplants were subjected to different stress conditions. The conclusions emphasize the hazardous role of root desiccation. Similar injury development was observed over a range of different planting sites. Controlling high temperatures during the transportation and storage of the plants was introduced as an indirect method for avoiding the risk of root desiccation.

The PDF includes a summary in Finnish.

  • Kauppi, E-mail: pk@mm.unknown (email)
article id 7595, category Article
Erkki Hallman, Pertti Hari, Pentti K. Räsänen, Heikki Smolander. (1978). Effect of planting shock on the transpiration, photosynthesis, and height increment of Scots pine seedlings. Acta Forestalia Fennica no. 161 article id 7595. https://doi.org/10.14214/aff.7595
Keywords: Pinus sylvestris; photosynthesis; Scots pine; planting; stress; seedlings; drought; transpiration; water deficit
Abstract | View details | Full text in PDF | Author Info

In the experiment Scots pine (Pinus sylvestris L.) seedlings were transplanted out in the field. The effect of the treatments on gas metabolism and daily height increment were examined. The seedlings were 5-year old Scots pine plants growing in clay pots, covered with plastic bags. Transpiration and photosynthetic rates were monitored with open IRGA measuring system for a few days before being subjected to the treatments and for one month after. In addition, the daily amounts of transpired water and daily height increments were measured. A model for the potential rate of each metabolic process was constructed.

Planting and additional exposure had a strong and rather permanent effect on the self-regulation of the processes. This effect is very similar to that caused by water deficit. Exposure makes the disturbance more pronounced. Transpiration of the transplanted seedlings decreased in a few days after planting to less than half of the potential value and that of the exposed ones decreased to a quarter of the potential value. The daily amounts of photosynthesis decreased to half of the potential value. There was no recovery in photosynthesis during the whole monitoring period of four weeks. There was a slight recovery in transpiration about five weeks after transplanting.

Thus, the treatment probably generated stress conditions throughout the whole growing period, which is characterized by strong self-regulation of photosynthesis and transpiration, thus causing an essential decrease in the total amount of CO2 fixed. The photosynthesis was depressed especially at elevated temperatures after planting, as during water deficit. Planting and additional exposure did not produce any detectable changes in the dependence of the growth rate on temperature or in the effect of self-regulation on height growth. On the other hand, the level of growth was decreased as a result of planting out.

The PDF includes a summary in Finnish.

  • Hallman, E-mail: eh@mm.unknown (email)
  • Hari, E-mail: ph@mm.unknown
  • Räsänen, E-mail: pr@mm.unknown
  • Smolander, E-mail: hs@mm.unknown
article id 7548, category Article
Leo Heikurainen, Pertti Veijola. (1971). Lannoituksen ja sarkaleveyden vaikutus rämeen uudistumiseen ja taimien kasvuun. Acta Forestalia Fennica no. 114 article id 7548. https://doi.org/10.14214/aff.7548
English title: Effect of fertilization and ditch spacing on regeneration and seedling growth in pine swamps.
Original keywords: mänty; istutus; taimet; lannoitus; turvekankaat; ojitetut suot; taimikuolleisuus; räme
English keywords: Pinus sylvestris; drained peatlands; Scots pine; planting; mortality; seedlings; fertilizing; pine bogs
Abstract | View details | Full text in PDF | Author Info

In 1965 and 1966 a total of 25 experiments were laid out in various parts of Finland in order to find out the effect of simultaneous variation in the intensity of drainage and fertilization on the development of plantations and natural seedling stands of Scots pine (Pinus sylvestris L.) growing on pine swamps. The fertilizer used was Y fertilizer for peat soils, a fertilizer mixture containing 14 % N, 18 % P2O5 and 10 % K2O. It was applied in rates of 500, 1,000 and 1,500 kg/ha. The ditch spacings studied were 10, 20 and 30 m. The present paper is a preliminary report on a series of studies, the experiments will be observation for a total of 15–20 years.

Mortality of the planted seedlings was found to be the higher after the first growing season, the larger the quantity of fertilizer that had been applied. Fertilizing caused an increase in seedling mortality even after the first growing season following application. At the end of the fifth growing season the height of both natural and planted seedlings is the greater, the larger the quantity of fertilizer that has been applied. Analysis of the height growth of the seedlings showed that larger quantities of fertilizer did not increase growth in the same proportion. The occurrence of growth disturbances is the greater, the more fertilizer has been applied.

Fertilization also changed the composition of ground vegetation. The in the beginning of the experiment  birch (Betula sp.) was absent in the area, but was found in the stands the greater abundance the higher application of the fertilizer.

From the viewpoint of growth of the seedlings the best results were obtained with the greatest intensity of fertilization and the narrowest ditch spacing used in the study. The results also show that strong fertilization and a high degree of drainage intensity are not capable of bringing about any particularly good growth on peatlands which originally are relatively poor in nutrients. The growth values now obtained equal only one third of those obtained on peat soils of greater fertility.

The PDF includes a summary in English.

  • Heikurainen, E-mail: lh@mm.unknown (email)
  • Veijola, E-mail: pv@mm.unknown
article id 7546, category Article
Pentti K. Räsänen. (1970). Nostoajankohdan, pakkaustavan, varastointiajan pituuden ja kastelun vaikutuksesta männyn taimien kehitykseen. Acta Forestalia Fennica no. 112 article id 7546. https://doi.org/10.14214/aff.7546
English title: The effect of lifting date, packing, storing and watering on the field survival and growth of Scots pine seedlings.
Original keywords: mänty; taimet; varastointi; kuolleisuus; kastelu; nostoaika
English keywords: Pinus sylvestris; Scots pine; planting; mortality; storage; seedlings; watering; lifting time
Abstract | View details | Full text in PDF | Author Info

This study was carried out in 1966 in the nursery at Hyytiälä, Korkeakoski Forest District, in Southern Finland. The influence of lifting date (two liftings), way of packing (two methods) and length of storage (one, three and six weeks) on the development of Scots pine (Pinus sylvestris L.), 2 + 1, during the four years following planting was assessed. On the seedlings stored for six weeks, the influence of compensating for the water deficit was also studied.

According to the results, the lifting carried out later, i.e. when the seedlings had already started growth, gave slightly better results than when seedlings were lifted earlier. No difference could be observed for seedlings stored for one week, but for the seedlings stored for three or six weeks, mortality in the lot lifted earlier was 6- to 7-fold that of the seedlings lifted later. The main reason for this was probably that the seedlings of the earlier lifting suffered from lack of water at the time of lifting.

The growth of the seedlings lifted earlier and stored for three weeks showed a decrease compared to those lifted later. For the seedlings stored for six weeks, on the other hand, faster growth was recorded for both the seedlings of the earlier and the later lifting in comparison with those stored for shorter times. Watering increased to some extent the growth of the seedlings stored for six weeks.

During the normal, one- and three-week storing periods, seedlings were well preserved when packed both in bundles and in polythene sacks. Three years after the planting the average mortality was about 10%. Effect of watering was large for those seedlings that had been longer in the storage.

The PDF includes a summary in English.

  • Räsänen, E-mail: pr@mm.unknown (email)

Category : Research article

article id 24047, category Research article
Kalle Kemppainen, Kalle Kärhä, Juha Laitila, Antti Sairanen, Ville Kankaanhuhta, Heli Viiri, Heli Peltola. (2024). Evaluation of the productivity and costs of excavator-based mechanized tree planting in Finland based on automated data collection. Silva Fennica vol. 58 no. 5 article id 24047. https://doi.org/10.14214/sf.24047
Keywords: site preparation; cost-efficiency; mechanization; forest regeneration; planting machine; site selection
Highlights: With proper site selection and competent machine operators, it is possible to achieve a higher productivity than 200 seedlings per operating hour in excavator-based mechanized planting; The hectare-based regeneration costs from excavator-based mechanized planting can be 5% lower than those of conventional manual planting chains; The most cost-efficient planting chain was a continuously advancing mounder combined with manual planting.
Abstract | Full text in HTML | Full text in PDF | Author Info

The poor cost-effectiveness of mechanized planting (MECP) is the main reason for the low mechanization rate of planting. In this study, we investigated the productivity of the mechanized excavator-based planting of Norway spruce (Picea abies [L.] H. Karst.) seedlings based on data collected by the Risutec Asta documentation system. We also compared the costs of a MECP chain with two different manual planting (MAP) chains, where mounding was carried out by a crawler excavator (EXC) or a continuously advancing mounder (CONT). The MECP of seedlings was carried out using an EXC equipped with a Risutec PM-1 60 planting device. Generally, the nine study sites in western Finland contained few surface obstacles (e.g., the logging residues had mainly been harvested), which made the conditions very suitable for MECP. The average production time taken by the MECP was 9 h ha-1. The operating hour (G15-h) productivity averaged 215 seedlings G15-h-1 , with the mean planting time being 13.8 s seedling-1. Loading 160 seedlings into the seedling cassette took approximately 10 min (3.8 s seedling-1). Overall, the cost of the MECP was about 5% lower than for the EXC + MAP. However, when productivity was set at <200 seedlings G15-h-1 , the cost of the MECP was higher than that of the EXC + MAP. Based on our findings, the most cost-efficient planting chain was CONT + MAP. However, based on our results, the required level of productivity can be achieved if the sites are suitable for MECP and the machine operators are skilled.

article id 23004, category Research article
Per Nordin, Erika Olofsson, Karin Hjelm. (2023). Within-site adaptation: growth and mortality of Norway spruce, Scots pine and silver birch seedlings in different planting positions across a soil moisture gradient. Silva Fennica vol. 57 no. 3 article id 23004. https://doi.org/10.14214/sf.23004
Keywords: regeneration; microsite; decision making; mounding; planting; depth-to-water
Highlights: A soil moisture map could be used to support the choice of planting position for different soil moisture conditions; Mounds reduced mortality rates for conifers when conditions were wet, but at drier conditions differences between planting positions were small; Contradictory, silver birch had higher survival in lower planting positions compared with mounds; Height and diameter were higher in mounds for conifers, but only small differences occurred between planting positions for silver birch.
Abstract | Full text in HTML | Full text in PDF | Author Info
Adapting to site conditions is a central part of forest regeneration and can be done through selection of different planting positions. Requirements are tree species specific, and the use of soil moisture maps could be a way to support decision making in forest regeneration planning. At two experimental sites with varying soil moisture conditions in southern Sweden Norway spruce (Picea abies (L.) Karst.), Scots pine (Pinus sylvestris L.), and silver birch (Betula pendula Roth) seedlings were planted in four different planting positions following mounding site preparation; Depression, Hinge, Mound and Unscarified. Soil moisture estimates were obtained from a high-resolution depth-to-water raster for each planting spot. The effect of soil moisture, planting position and their interactions on mortality, height and diameter was evaluated for each tree species. In wet conditions mounds proved to be the best option to minimize seedling mortality for conifers, but with decreasing soil moisture, differences between the planting positions decreased. Birch on the other hand had the greatest survival in the hinge. The coniferous species displayed increased height and diameter when planted in mounds independent of the soil moisture conditions, whereas silver birch was less dependent on a specific planting position. Results from this study shows that a soil moisture map can explain mortality, height and diameter and thus can be a useful tool when choosing planting position in different soil moisture conditions.
article id 10663, category Research article
Back Tomas Ersson, Lars-Göran Sundblad, Jussi Manner. (2022). Cost analysis of seedling supply systems adapted for mechanized tree planting: a case study from southern Sweden. Silva Fennica vol. 56 no. 2 article id 10663. https://doi.org/10.14214/sf.10663
Keywords: logistics; silviculture; reforestation; tree planting machine; containerized seedling; seedling handling; system analysis
Highlights: The total cost of cardboard box concepts that increase the productivity of tree planting machines is higher than of the cultivation tray system (5–49% in the basic scenario); Increasing the boxes’ packing densities and/or the planting machines’ hourly cost increases the boxes’ cost-competitiveness; Packing density is a key factor in achieving highly cost-efficient seedling supply systems for mechanized tree planting.
Abstract | Full text in HTML | Full text in PDF | Author Info

Because today’s tree planting machines do a good job silviculturally, the Nordic forest sector is interested in finding ways to increase the planting machines’ productivity. Faster seedling reloading increases machine productivity, but that solution might require investments in specially designed seedling packaging. The objective of our study was to compare the cost-efficiency of cardboard box concepts that increase the productivity of tree planting machines with that of today’s two most common seedling packaging systems in southern Sweden. We modelled the total cost of these five different seedling packaging systems using data from numerous sources including manufacturers, nurseries, contractors, and forest companies. Under these southern Swedish conditions, the total cost of cardboard box concepts that increase the productivity of intermittently advancing tree planting machines was higher than the cost of the cultivation tray system (5–49% in the basic scenario). However, the conceptual packaging system named ManBox_fast did show promise, especially with increasing primary transport distances and increased planting machine productivities and hourly costs. Thus, our results show that high seedling packing density is of fundamental importance for cost-efficiency of cardboard box systems designed for mechanized tree planting. Our results also illustrate how different factors in the seedling supply chain affect the cost-efficiency of tree planting machines. Consequently, our results underscore that the key development factor for mechanized tree planting in the Nordic countries is the development of cost-efficient seedling handling systems between nurseries and planting machines.

  • Ersson, SLU, School of Forest Management, SE-739 21 Skinnskatteberg, Sweden ORCID https://orcid.org/0000-0003-2442-7482 E-mail: back.tomas.ersson@slu.se (email)
  • Sundblad, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: lars-goran.sundblad@skogforsk.se
  • Manner, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden ORCID https://orcid.org/0000-0002-4982-3855 E-mail: jussi.manner@skogforsk.se
article id 10512, category Research article
Mateusz Liziniewicz, Ignacio Barbeito, Andis Zvirgzdins, Lars-Göran Stener, Pentti Niemistö, Nils Fahlvik, Ulf Johansson, Bo Karlsson, Urban Nilsson. (2022). Production of genetically improved silver birch plantations in southern and central Sweden. Silva Fennica vol. 56 no. 1 article id 10512. https://doi.org/10.14214/sf.10512
Keywords: Betula pendula; planting; generalized algebraic difference approach; genetic gain; stand basal area starting function
Highlights: The basal area development of genetically improved birch in Sweden was modeled using a generalized algebraic difference approach; The best model fit, both graphically and statistically was delivered by the Korf base model; The analysis of realized gain trial showed a stability of relative differences in basal area between tested genotypes.
Abstract | Full text in HTML | Full text in PDF | Author Info

Investing in planting genetically improved silver birch (Betula pendula Roth) in Swedish plantations requires understanding how birch stands will develop over their entire rotation. Previous studies have indicated relatively low production of birch compared to Norway spruce (Picea abies (L.) Karst.) and Scots pine (Pinus sylvestris L.). This could result from using unrepresentative basic data, collected from unimproved, naturally-regenerated birch (Betula spp.) growing on inventory plots often located in coniferous stands. The objective of this study was to develop a basal area development function of improved silver birch and evaluate production over a full rotation period. We used data from 52 experiments including planted silver birch of different genetic breeding levels in southern and central Sweden. The experimental plots were established on fertile forest sites and on former agricultural lands, and were managed with different numbers of thinnings and basal area removal regimes. The model best describing total stand basal area development was a dynamic equation derived from the Korf base model. The analysis of the realized gain trial for birch showed a good stability of the early calculated relative differences in basal area between tested genotypes over time. Thus, the relative difference in basal area might be with cautious used as representation of the realized genetic gain. On average forest sites in southern Sweden, improved and planted silver birch could produce between 6–10.5 m3 ha–1 year–1, while on fertile agriculture land the average productivity might be higher, especially with material coming from the improvement program. The performed analysis provided a first step toward predicting the effects of genetic improvement on total volume production and profitability of silver birch. However, more experiments are needed to set up the relative differences between different improved material.

  • Liziniewicz, The Forestry Research Institute of Sweden, Ekebo, SE-268 90 Svalöv, Sweden E-mail: mateusz.liziniewicz@skogforsk.se
  • Barbeito, Southern Swedish Forest Research Centre, Swedish University of Agricultural Sciences, Alnarp, Sweden; Université de Lorraine, AgroParisTech, INRAE, UMR Silva, Nancy, France E-mail: ignacio.barbeito@slu.se
  • Zvirgzdins, Southern Swedish Forest Research Centre, Swedish University of Agricultural Sciences, Box 49, 23053 Alnarp, Sweden E-mail: andis.zvirgzdins@slu.se (email)
  • Stener, The Forestry Research Institute of Sweden, Ekebo, SE-268 90 Svalöv, Sweden E-mail: lg.stener@telia.com
  • Niemistö, Natural Resources In-stitute Finland (Luke), Natural resources, Seinäjoki, Finland E-mail: pentti.niemisto@luke.fi
  • Fahlvik, The Forestry Research Institute of Sweden, Ekebo, SE-268 90 Svalöv, Sweden E-mail: nils.fahlvik@skogforsk.se
  • Johansson, Tönnersjöheden Experimental Forest, SLU, Simlångsdalen, Sweden E-mail: ulf.johansson@slu.se
  • Karlsson, The Forestry Research Institute of Sweden, Ekebo, SE-268 90 Svalöv, Sweden E-mail: curly.birch@gmail.com
  • Nilsson, Southern Swedish Forest Research Centre, Swedish University of Agricultural Sciences, Box 49, 23053 Alnarp, Sweden E-mail: urban.nilsson@slu.se
article id 10580, category Research article
Tomi Kaakkurivaara, Nopparat Kaakkurivaara. (2021). Cost-efficiency and ergonomic study of two methods for planting Eucalyptus spp. seedlings in plantation forestry. Silva Fennica vol. 55 no. 4 article id 10580. https://doi.org/10.14214/sf.10580
Keywords: productivity; time study; planting stick; planting tube; REBA; work load; work sampling
Highlights: We present a first assessment of the planting stick method as used in Thailand for planting Eucalyptus spp. seedlings in plantations in terms of time, cost and ergonomic parameters; Parallel analysis shows that the planting tube method may be superior for planting Eucalyptus spp. seedlings
Abstract | Full text in HTML | Full text in PDF | Author Info

In Thailand and various other countries tree seedlings are generally planted using simple manual tools, often a ‘planting stick’, but the method requires time-consuming, labour-intensive teamwork. However, use of a ‘planting tube’ allows a single person to perform both the preparation and planting work. Thus, in a classical time study and ergonomic survey we compared the productivity, cost-effectiveness, and ergonomic impact of planting Eucalyptus spp. seedlings using the two tools at the same planting site in Western Thailand. The planting tube method proved to be more productive, more cost-efficient, and less burdensome than the planting stick method (with time and cost requirements of 21 s and €0.0061 per seedling, versus 16.6 s and €0.0463 per seedling, respectively). In conclusion, the planting tube method may be a viable alternative to reduce costs and increase productivity, while maintaining reasonable workloads for the workers, despite the higher purchase price of planting tubes.

  • Kaakkurivaara, Department of Forest Engineering, Faculty of Forestry, Kasetsart University, 50 Phahonyothin Rd, Lat Yao, Chatuchak, Bangkok 10900, Thailand E-mail: tomi.kaakkurivaara@gmail.com (email)
  • Kaakkurivaara, Department of Forest Engineering, Faculty of Forestry, Kasetsart University, 50 Phahonyothin Rd, Lat Yao, Chatuchak, Bangkok 10900, Thailand E-mail: ffornrm@ku.ac.th
article id 10528, category Research article
Jaana Luoranen, Heli Viiri. (2021). Comparison of the planting success and risks of pine weevil damage on mineral soil and drained peatland sites three years after planting. Silva Fennica vol. 55 no. 4 article id 10528. https://doi.org/10.14214/sf.10528
Keywords: survival; planting; mechanical site preparation; ground vegetation; forest regeneration; Hylobius abietis
Highlights: The planting success was poorer on peatland sites than on mineral soil; Dense ground vegetation cover is more probable on peatland than on mineral soil; No differences in pine weevil feeding damage on mineral soil and peatland were found; Cultivated mineral soil reduced the vegetation cover, feeding damage and seedling mortality.
Abstract | Full text in HTML | Full text in PDF | Author Info

Over 20% of regeneration operations will be on drained peatland in the next decade in Finland. There are only a few studies comparing the planting success and the risk of pine weevil (Hylobius abetis (L.) feeding damage on mineral soil and drained peatland. Thirty sites planted with Norway spruce (Picea abies (L.) H. Karst.) container seedlings in 2009 in Southern and Central Finland were inventoried three growing seasons after planting. Prediction models for the probability of survival, pine weevil damage and the presence of ground vegetation cover were done separately for peatland and mineral soil sites. The planting success was 17% lower on peatland sites (1379 surviving seedlings ha–1) than on mineral soil (1654 seedlings ha–1). The factors explaining the survival were the ground vegetation cover and type of the planting spot on the peatland, and the ground vegetation cover on mineral soil. On mineral soil, 76% of the planting spots were on cultivated mineral soil while on peatland only 28% of the seedlings were planted on similar spots. There were also fewer seedlings that were surrounded by dense ground vegetation on mineral soil (4%) than on peatland (14%). Pine weevil feeding damage did not differ significantly on peatland (23%) or mineral soil (18%). The more time there was from clear-cutting, the more the probability of pine weevil feeding damage was reduced on both soil classes. Additionally, cover vegetation in the vicinity of the seedlings increased on mineral soil. Cultivated planting spots, especially those covered by mineral soil, prevented pine weevil feeding and reduced the harmful effects of vegetation on the seedlings both on mineral soil and peatland.

article id 10243, category Research article
Laura Pikkarainen, Jaana Luoranen, Antti Kilpeläinen, Teppo Oijala, Heli Peltola. (2020). Comparison of planting success in one-year-old spring, summer and autumn plantings of Norway spruce and Scots pine under boreal conditions. Silva Fennica vol. 54 no. 1 article id 10243. https://doi.org/10.14214/sf.10243
Keywords: Pinus sylvestris; Picea abies; seedling damage; forest regeneration; field performance; planting season
Highlights: In Norway spruce, 84% of all plantings were successful, whereas in Scots pine, the corresponding number was 52%; The major reason for poor planting results was poor work quality; An extended planting season is possible for Norway spruce in southern and central Finland; In Scots pine, there are still large uncertainties in the success of summer and autumn plantings.
Abstract | Full text in HTML | Full text in PDF | Author Info

In Nordic countries, tree planting of seedlings is mainly performed during spring and early summer. Interest has increased in extending the planting window throughout the unfrozen growing season. This study compared the success of one-year-old spring, summer and autumn plantings in practical forestry in Norway spruce (Picea abies (L.) Karst.) and Scots pine (Pinus sylvestris L.) in southern and central Finland. Planting success was based on the number of viable seedlings per hectare relative to a species-specific target density. The influence of different factors to poor planting results were determined, including quality of site preparation and planting, and sources of natural damage. Overall, in Norway spruce, 85, 69 and 84% and in Scots pine 53, 55 and 40% of spring, summer and autumn plantings succeeded. In Norway spruce, the planting results were consistent between the southern and central regions, whereas in Scots pine, the success was slightly lower in the south. The poor work quality and a low density of appropriate planting spots, contributed to poor planting results, regardless of planting season, region or tree species. Considering different damages, especially mammal damage contributed to the failure of Scots pine spring plantings, whereas in summer plantings, corresponding single failure reason could not be identified. Based on our findings, extending the planting season of Norway spruce could be recommended in both regions. For Scots pine, there is still significant uncertainty about the success of summer and autumn plantings, partially due to the limited number of plantings available for analyses.

  • Pikkarainen, School of Forest Sciences, University of Eastern Finland, Yliopistonkatu 7, FI-80100 Joensuu, Finland E-mail: laura.pikkarainen@uef.fi (email)
  • Luoranen, Natural Resources Institute Finland (Luke), Production Systems, Neulaniementie 5, FI-70210 Kuopio, Finland E-mail: jaana.luoranen@luke.fi
  • Kilpeläinen, School of Forest Sciences, University of Eastern Finland, Yliopistonkatu 7, FI-80100 Joensuu, Finland E-mail: antti.kilpelainen@uef.fi
  • Oijala, Metsä Group, Metsä Forest, Kuormaajantie 7, FI-40320 Jyväskylä, Finland E-mail: teppo.oijala@metsagroup.com
  • Peltola, School of Forest Sciences, University of Eastern Finland, Yliopistonkatu 7, FI-80100 Joensuu, Finland E-mail: heli.peltola@uef.fi
article id 7813, category Research article
Jaana Luoranen. (2018). Autumn versus spring planting: the initiation of root growth and subsequent field performance of Scots pine and Norway spruce seedlings. Silva Fennica vol. 52 no. 2 article id 7813. https://doi.org/10.14214/sf.7813
Keywords: bud burst; planting date; root growth; shoot growth
Highlights: Conifer seedlings planted after mid-September generally have poor rooting, which causes poor root egress during the following spring; Although Scots pine and Norway spruce seedlings planted in late autumn may have a slightly reduced growth, it is possible to plant them if weather conditions are favorable in late-autumn, without increased mortality.
Abstract | Full text in HTML | Full text in PDF | Author Info

There is a need to extend the planting season of conifer regeneration into periods where the soil remains unfrozen due to a lack of available labor and the mechanization of planting. This study investigated how the summer- (August) and autumn-, especially late autumn (mid-September to mid-October) plantings affect the field performance of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) container seedlings. This study examined the timing of root growth just after planting, shoot flush and the start of root growth the following spring, and subsequent field performance. Seedlings of both species were planted in a nursery field trial, and in a clearcut reforestation site from August to October and the following May. The root growth of planted seedlings declined in September and ceased after mid-September. In the following spring, seedlings which were planted in early-autumn started their root growth faster than late-autumn-planted seedlings in both species. There was no difference in the timing of shoot flush for various planting dates. During the initial two years after planting, the shoot growth of spring-planted seedlings was lower, compared to autumn-planted seedlings. In conclusion, it is possible to plant conifer seedlings in the boreal forest zone up to October under non-limiting field conditions.

  • Luoranen, Natural Resources Institute Finland (Luke), Production systems, FI-77600 Suonenjoki, Finland E-mail: jaana.luoranen@luke.fi (email)
article id 1665, category Research article
Lauri Haataja, Ville Kankaanhuhta, Timo Saksa. (2018). Reliability of self-control method in the management of non-industrial private forests. Silva Fennica vol. 52 no. 1 article id 1665. https://doi.org/10.14214/sf.1665
Keywords: forest management; soil preparation; quality control; young stand management; forest regeneration; boreal silviculture; forest planting
Highlights: Self-control method was found reliable at the main stages of the forest regeneration process; Only slight overestimation was found in self-control results of soil preparation and planting and small underestimation in self-control of young stand management; Diverse utilizing of self-control data is possible in support of service providers operations.
Abstract | Full text in HTML | Full text in PDF | Author Info
This study seeks to determine the extent to which self-control data can be relied upon in the management of private forests. Self-control (SC) requires the forest workers to evaluate their own work quality to ensure the clients’ needs are met in terms of soil preparation, planting and young stand management. Self-control data were compared to an independent evaluation of the same worksites. Each dataset had a hierarchical structure (e.g., sample plot, regeneration area and contractor), and key quality indicators (i.e., number of prepared mounds, planted seedlings or crop trees) were measured for each plot.  Self-control and independent-assessments (IA) were analyzed by fitting a multi-level multivariate model containing explanatory variables. No significant differences were observed in terms of soil preparation (number of mounds) or young stand management (number of crop trees) between self-control and independent-assessments. However, the self-control planting data included a slight but significant overestimation of the number of planted seedlings. Discrepancies are discussed in terms of sampling error and other explanatory factors. According to overall results, self-control methods are reliable at every stage of the forest regeneration process. As such, the diverse utilizing of self-control data is possible in support of service providers operations.
  • Haataja, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: lauritapiohaataja@gmail.com (email)
  • Kankaanhuhta, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: ville.kankaanhuhta@luke.fi
  • Saksa, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: timo.saksa@luke.fi
article id 1607, category Research article
Yanlin Fu, Juan A. Oliet, Guolei Li, Jiaxi Wang. (2017). Effect of controlled release fertilizer type and rate on mineral nutrients, non-structural carbohydrates, and field performance of Chinese pine container-grown seedlings. Silva Fennica vol. 51 no. 2 article id 1607. https://doi.org/10.14214/sf.1607
Keywords: growth; nursery fertilization; Pinus tabulaeformis; nutrient loading; outplanting performance
Highlights: We demonstrated that Chinese pine container-grown seedling nutrient status and non-structural carbohydrate content were sufficient over a wide range of fertilization rates; Fertilization at 80 mg N seedling–1 was optimal for seedling responses in the nursery and field; Nursery fertilization using controlled release fertilizer (CRF) with a single coating layer yielded better seedling nursery performance than CRF with multiple coatings.
Abstract | Full text in HTML | Full text in PDF | Author Info

Although controlled release fertilizer (CRF) with single and multiple-layer coatings are extensively used in tree seedlings, studies that compare the impact of CRF type and application rate on seedling growth, nutrient storage, and, most importantly, outplanting performance, are lacking. In the current study, container-grown Pinus tabulaeformis Carr. (Chinese pine) seedlings were fertilized with commercial CRF with either one or multiple coating layers with equivalent formulation and longevity, at six rates ranging from 40 to 240 mg N seedling–1. Seedlings were sampled for dry mass, non-structural carbohydrate (NSC) content, and mineral nutrient status at the end of the growing season in the nursery, and subsequently outplanted for one season. Compared to Chinese pine seedlings fertilized with single-layer CRF treatments, seedlings treated with multiple-layer CRF had higher starch concentrations but reduced dry mass and N, P, K concentrations in the nursery, and reduced diameter growth in the field. Fertilization rates of 80 and 120 mg N seedling–1 generally yielded maximal plant dry mass and mineral nutrient content. Field survival peaked at 80 mg N seedling–1. Seedling growth, soluble sugar content, and starch concentration in the nursery and survival in the field consistently decreased at rates of 200 and 240 mg N seedling–1. In our study, optimal nursery and field performance of P. tabulaeformis were observed using single layer CRF at 80 mg N seedling–1 (3.3 g CRF l–1 media).

  • Fu, Key Laboratory for Silviculture and Conservation, Ministry of Education, Beijing Forestry University; Beijing Laboratory of Urban and Rural Ecological Environment; 35 East Qinghua Road, Haidian District, Beijing 100083, China E-mail: bjfu_fu@163.com
  • Oliet, Department of Natural Systems and Resources, Universidad Politécnica de Madrid, Ciudad Universitaria s/n, 28040 Madrid, Spain E-mail: juan.oliet@upm.es
  • Li, Key Laboratory for Silviculture and Conservation, Ministry of Education, Beijing Forestry University; Beijing Laboratory of Urban and Rural Ecological Environment; 35 East Qinghua Road, Haidian District, Beijing 100083, China E-mail: glli226@163.com (email)
  • Wang, Key Laboratory for Silviculture and Conservation, Ministry of Education, Beijing Forestry University; Beijing Laboratory of Urban and Rural Ecological Environment; 35 East Qinghua Road, Haidian District, Beijing 100083, China E-mail: wjx198979@163.com
article id 1475, category Research article
Jiaxi Wang, Haiqun Yu, Guolei Li, Feng Zhang. (2016). Growth and nutrient dynamics of transplanted Quercus variabilis seedlings as influenced by pre-hardening and fall fertilization. Silva Fennica vol. 50 no. 2 article id 1475. https://doi.org/10.14214/sf.1475
Keywords: nutrient loading; nutrient storage; nursery transplanting; seedling quality
Highlights: High pre-hardening fertilization favored seedling growth and nutrient storage at the rapid growth and hardening phases following transplantation. Overall, high fall fertilization was beneficial only at the hardening phase; The combination of 100 mg N seedling–1 during pre-hardening with 36 mg N seedling–1 during hardening was recommended for satisfactory transplanting performance for Quercus variabilis.
Abstract | Full text in HTML | Full text in PDF | Author Info

Stored nutrient reserves are closely correlated with survival and growth of transplanted seedlings. Previous studies have proven that combining pre-hardening fertilization (PF) with fall fertilization (FF) built seedling nutrient reserves more effectively; however, their effect on transplanting performance is poorly documented. We investigated the independent and interacting effects of 2 levels of PF and 4 levels of FF on seedling growth, nutrient acquisition and accumulation during different growth phases 1 year after transplanting of Quercus variabilis Blume in a nursery. High PF benefited nutrient reserves and subsequent transplanted seedling growth and tissue nutrient storage at the end of the rapid growth and hardening phases. Fall fertilization with 36 mg N increased stem dry mass and tissue nutrient content at the end of the hardening phase. At the conclusion of establishment, PF and FF showed a significant interaction for N and K uptake from soil. At the end of the rapid growth and hardening phases, high PF consistently increased nutrient uptake. Enhanced N and K uptake occurred following application of 36 mg N of FF at the end of the hardening phase. Distinct roles for PF and FF on 3 phases of transplanted seedlings demonstrated the necessity to evaluate fertilization in terms of nutrient reserves and subsequent transplanting performance in consecutive phases. Combining 100 mg N seedling–1 during pre-hardening with 36 mg N seedling–1 during fall yielded ideal transplanting performance for Quercus variabilis seedlings.

  • Wang, Key Laboratory for Silviculture and Conservation, Ministry of Education; Beijing Laboratory of Urban and Rural Ecological Environment, Beijing Forestry University, 35 East Qinghua Road, Haidian District, Beijing 100083, China E-mail: wjx198979@163.com
  • Yu, Beijing Forestry Carbon Administration, room 201, No.1 Xiao Huang Zhuang Bei Jie, Dongcheng District, Beijing 100013, China E-mail: yuhq@bfdic.com
  • Li, Key Laboratory for Silviculture and Conservation, Ministry of Education; Beijing Laboratory of Urban and Rural Ecological Environment, Beijing Forestry University, 35 East Qinghua Road, Haidian District, Beijing 100083, China E-mail: glli226@163.com (email)
  • Zhang, Beijing Forestry Carbon Administration, room 201, No.1 Xiao Huang Zhuang Bei Jie, Dongcheng District, Beijing 100013, China E-mail: zhangf@bfdic.com
article id 1323, category Research article
Tiina Laine, Kalle Kärhä, Antti Hynönen. (2016). A survey of the Finnish mechanized tree-planting industry in 2013 and its success factors. Silva Fennica vol. 50 no. 2 article id 1323. https://doi.org/10.14214/sf.1323
Keywords: regeneration; boreal; forestry; silviculture; mechanization; planting machines; critical success factors (CSFs)
Highlights: In 2013, 31 planting machines were operated by 22 businesses and planted 4.7 million seedlings on 2663 hectares in Finland; Critical success factors included expertise of planting machine operators, high quality planting, adequate amount of work, stoniness, and removal of slash; Growth of the industry will depend on improved cost-efficiency, appropriate worksites, marketing, development of planting machines.
Abstract | Full text in HTML | Full text in PDF | Author Info

The aim of the study was to update the information pertaining to mechanized tree-planting activity in Finland in 2013 and its success factors. All businesses providing a mechanized tree-planting service were interviewed and asked to describe their equipment and activities, identify critical success factors (CSFs), and suggest areas for improvement. In 2013, 31 planting machines (18 Bracke P11.a, 11 M-Planter and 2 Risutec) operated by 22 businesses planted approximately 4.7 million seedlings on 2663 hectares. CSFs included expertise of planting machine operators, high quality planting, adequate amount of work, stoniness, and removal of slash. Based on the survey, some recommendations for improving mechanized planting work can be made. Firstly, improving the cost-efficiency of mechanized planting is necessary to enhance businesses’ profitability. Secondly, worksite selection is crucial as stoniness, stumps and slash debris diminish productivity. Lastly, the popularity of mechanized planting in the future will benefit from more marketing. Many businesses were unwilling to increase the area of service, invest in new equipment, or increase the volume of planting work but they believed that mechanized planting will become more popular in the near future.

  • Laine, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: tiina.laine@luke.fi (email)
  • Kärhä, Stora Enso Wood Supply Finland, P.O. Box 309, FI-00101 Helsinki, Finland E-mail: kalle.karha@storaenso.com
  • Hynönen, University of Eastern Finland, Faculty of Science and Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hynonena@gmail.com
article id 1300, category Research article
Jaana Luoranen, Risto Rikala. (2015). Post-planting effects of early-season short-day treatment and summer planting on Norway spruce seedlings. Silva Fennica vol. 49 no. 1 article id 1300. https://doi.org/10.14214/sf.1300
Keywords: Picea abies; height growth; survival; bud burst; short-day treatment; summer planting
Highlights: Summer planting and short-day treatment advanced the bud burst and increased the height of Norway spruce seedlings after planting, compared to autumn and spring planted or untreated seedlings.
Abstract | Full text in HTML | Full text in PDF | Author Info
Effects of short-day (SD) treatment on bud burst, growth and survival of Norway spruce (Picea abies [L.] Karst.) container seedlings after summer planting were studied in an experiment established in Suonenjoki, Central Finland. One-year-old seedlings were SD-treated for three weeks starting on 18 June, 24 June and 8 July 2004 and then planted on 22 July, 5 August, 6 September 2004 and, as a normal spring planting, on 10 May, 2005. Untreated control seedlings were also planted on these dates. Second flush on the planting year and bud burst the following spring was monitored in planted seedlings, whereas seedling height and survival were determined at the end of growing seasons 2004–2006. We observed a non-significant risk of a second flush if seedlings were SD-treated on 18 June. Also, SD-treated seedlings planted in July or August showed advanced bud burst and increased height the following growing season without significant effects on survival, compared to autumn and spring planted seedlings. Planting in July or early August was associated with a significant increase in the incidence of multiple leaders in later years. Based on our results, to begin a three-week SD treatment in late June or early July and then plant seedlings in late July or early August could be a good practice.
  • Luoranen, Natural Resources Institute Finland (Luke), Natural resources and bioproduction, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: jaana.luoranen@luke.fi (email)
  • Rikala, The Finnish Forest Research Institute, Suonenjoki Unit, Suonenjoki, Finland E-mail: rikala@dnainternet.fi
article id 1161, category Research article
Tiina Laine, Veli-Matti Saarinen. (2014). Comparative study of the Risutec Automatic Plant Container (APC) and Bracke planting devices. Silva Fennica vol. 48 no. 3 article id 1161. https://doi.org/10.14214/sf.1161
Keywords: productivity; regeneration; cost-efficiency; planting cost; mechanized tree planting
Highlights: As currently designed, the prototype Risutec APC fitted with an automatic feeding system offers no significant advantage over the Bracke planting device in terms of planting productivity or quality; Cost estimates suggest that an idealized automated feeding system could increase productivity and decrease unit costs.
Abstract | Full text in HTML | Full text in PDF | Author Info
The productivity of mechanized planting could be increased by minimizing the time spent manually reloading seedling cassettes. This study compared the work-time distribution, productivity and quality of the prototype Risutec APC fitted with an automatic feeding system and the commonly-used and manually-loaded Bracke P11.a. An approach of comparative time study was employed that compared performance of two operators using both machines in four sites where slash and stumps had been removed. Operating costs were estimated and compared for these two machines and an idealized machine with automatic feeding system (referred as AUT). AUT was assumed to be similar to the Bracke planting machine with the only difference being in automatic feeding. Productivity of the Risutec APC (196 seedlings per productive work hour [pl PWh0–1]) was lower than that of Bracke (244 pl PWh0–1), making the unit cost 35.7% higher. A large portion (17.6%) of the productive work time of Risutec APC was interrupted by malfunctions, so it cannot be considered robust and reliable yet. Quality of the planting work was reasonable for both machines. The results suggest that an idealized AUT could increase planting capacity (hectares per year [ha yr–1]) by 15.4% and lower the unit cost (Euro per seedling [€ pl–1]) by 4.7% compared to today’s machines. The importance of an automated feeding system increases with planting efficiency because relatively more time is spent reloading seedlings. Proper automatic feeding system could offer a cost-effective solution and could enhance productivity, but the Risutec APC has yet to meet the technical and economic standards required to be competitive.
  • Laine, Finnish Forest Research Institute (METLA), Suonenjoki Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: tiina.laine@metla.fi (email)
  • Saarinen, Finnish Forest Research Institute (METLA), Suonenjoki Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: veli-matti.saarinen@metla.fi
article id 1064, category Research article
Back Tomas Ersson, Urban Bergsten, Ola Lindroos. (2014). Reloading mechanized tree planting devices faster using a seedling tray carousel. Silva Fennica vol. 48 no. 2 article id 1064. https://doi.org/10.14214/sf.1064
Keywords: productivity; cost analysis; seedling feed; silviculture; time study; tree planting machine; containerized seedling
Highlights: Seedling reloading onto the Bracke Planter crane-mounted planting device was twice as fast with the MagMat tray-wise-loaded carousel as today’s seedling-wise-loaded carousel; Tray-wise reloading combined with deplugging seedlings from suitable cultivation trays has the potential to be an efficient and robust way to feed seedlings on any type of tree planting machine.
Abstract | Full text in HTML | Full text in PDF | Author Info
On Nordic clearcuts, today’s tree planting machines produce high-quality but costly regenerations. Much of this high cost is attributable to the planting machines’ low productivity. One promising way of raising productivity is to lessen the time spent manually reloading seedlings onto the carousels of crane-mounted planting devices. Using MagMat, a carousel test-rig designed by engineering students, we studied how much faster tray-wise seedling reloading is on the Bracke Planter compared to reloading with today’s seedling-wise-loaded carousel. The MagMat test-rig held eight Hiko cultivation trays from which seedlings were deplugged individually and dropped into the planting tube. The time study confirmed that seedling reloading was on average twice as fast with MagMat compared to today’s seedling carousel, thereby increasing assumed planting machine productivity by 8–9% depending on the planting device used. MagMat’s cost-efficiency was analysed to be particularly reliant on its added investment cost, mechanical availability and how quickly trays can be switched automatically. Nevertheless, MagMat’s field performance illustrated the overall potential of tray-wise loading compared to piecewise seedling loading for increasing the productivity of crane-mounted planting devices. Also, deplugging proved to be a reliable method of extracting seedlings from the rigid, copper-painted Hiko cultivation trays even when performed at the excavator’s boom-tip during mounding work. We conclude that, rather than piecewise seedling loading, tray-wise loading combined with deplugging seedlings from suitable cultivation trays is a reliable and much more time-efficient method to feed seedlings on probably any type of tree planting machine.
  • Ersson, Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden E-mail: back.tomas.ersson@slu.se (email)
  • Bergsten, Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden E-mail: urban.bergsten@slu.se
  • Lindroos, Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden E-mail: ola.lindroos@slu.se
article id 958, category Research article
Back Tomas Ersson, Linus Jundén, Urban Bergsten, Martin Servin. (2013). Simulated productivity of one- and two-armed tree planting machines. Silva Fennica vol. 47 no. 2 article id 958. https://doi.org/10.14214/sf.958
Keywords: discrete-event simulation; mechanized planting; forestry; silviculture; automation; terrain model; root model
Highlights: Using discrete-event simulation and detailed terrain and machine models, the productivities of excavator-based one- and two-armed tree planting machines were simulated; The machines’ arms were equipped with one-and two-headed planting devices; Two planting heads per arm rather than two arms per base machine is better for increasing the productivity of intermittently advancing planting machines on Nordic clearcuts.
Abstract | Full text in HTML | Full text in PDF | Author Info
To increase mechanized planting, planting machine productivity must increase in order to improve cost-efficiency. To determine if excavators with two crane arms could potentially help to increase planting machine productivity under Nordic clearcut conditions, we modelled one-armed and semi-automated two-armed excavators with one- and two-headed planting devices. Using a recently developed tool for discrete-event simulation, these machine models then mounded and planted seedlings on terrain models with moraine soil having various frequencies of obstacles (stumps, roots and stones). Compared to if the two heads were mounted pairwise on only one arm, the results showed that productivity did not increase if two planting heads were attached individually to two separate crane arms. But productivity did increase if the planting machine had four planting heads mounted pairwise on two separate arms. However, despite assuming automated mounding and crane motion between planting spots, the two-armed, four-headed model never achieved high enough productivity levels to make it more cost-efficient than one-armed machines. The simulations illustrate that our terrain models generate realistic root architecture and boulder content distributions in moraine soil, while our machine models functionally describe mechanized planting work. Based on our assumptions, we conclude that further development work on two-armed excavator-based planting machines for Nordic clearcut conditions is not warranted. Our simulations reveal that increasing the number of planting heads per crane arm rather than number of crane arms per base machine offers the greatest potential to raise the productivity of intermittently advancing planting machines.
  • Ersson,  Swedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, SE-901 83 Umeå, Sweden E-mail: back.tomas.ersson@slu.se (email)
  • Jundén,  UMIT Research Lab, Umeå University, SE-901 87 Umeå, Sweden E-mail: linus.junden@gmail.com
  • Bergsten,  Swedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, SE-901 83 Umeå, Sweden E-mail: urban.bergsten@slu.se
  • Servin,  UMIT Research Lab, Umeå University, SE-901 87 Umeå, Sweden E-mail: martin.servin@physics.umu.se
article id 928, category Research article
Rune Simonsen. (2013). Optimal regeneration method – Planting vs. natural regeneration of Scots pine in northern Sweden. Silva Fennica vol. 47 no. 2 article id 928. https://doi.org/10.14214/sf.928
Keywords: optimisation; silviculture; genetically improved planting material
Highlights: Two regeneration methods were modelled on stand level and optimised numerically to maximise present value for a range of site indexes and locations; Natural regeneration was optimal in most cases; Planting was optimal for high site indexes, low rate of seedling mortality and for low discount rates; Using genetically improved plant material greatly shifts the preference towards planting
Abstract | Full text in HTML | Full text in PDF | Author Info
In this study the profitability of regenerating Scots pine (Pinus sylvestris L.) was examined for two methods; planting and natural regeneration with seed trees. The methods were modelled on stand level and optimised numerically using nonlinear optimisation. The analysis includes 7 site indexes, 16 to 28 expressed as dominant height in meters at an age of 100 years; and 8 localities in northern Sweden distributed on two latitudes, 60°N and 64°N and four altitudes, 100 to 400 m.a.s.l. Furthermore, two scenarios of genetically improved planting material were examined. The results show that the optimal choice of regeneration method depends on the location, site index and discount rate. Considering the same genetic regeneration material, natural regeneration was the optimal method for most of the evaluated sites. Planting was optimal only for stands of high site index and low rate of seedling mortality, which is associated with localities on low altitudes. The break even site index, where the two methods yielded the same net present value, was 27 on average (25 to 28). The choice between the two regeneration methods was found to be more economically important when the discount rate was low and for low site indexes. The option of using genetically improved plant material shift the preference towards planting. Thus, the two levels of genetic gain of +4% and +10% to maximum mean annual increment resulted in an average break even site index of 25 and 21 respectively.
  • Simonsen, Department of Forest Economics, SLU, SE-901 83 Umeå, Sweden E-mail: rune.simonsen@slu.se (email)
article id 108, category Research article
Back Tomas Ersson, Urban Bergsten, Ola Lindroos. (2011). The cost-efficiency of seedling packaging specifically designed for tree planting machines. Silva Fennica vol. 45 no. 3 article id 108. https://doi.org/10.14214/sf.108
Keywords: logistics; mechanized planting; containerized seedlings; seedling transport; cost analysis; seedling feed; nursery technology
Abstract | View details | Full text in PDF | Author Info
Today’s crane-mounted planting heads plant seedlings with biologically similar or better results than operational manual planting. However, the total cost of mechanized tree planting in southern Sweden must decrease at least 25% to compete economically with manual planting. Although seedlings packed in machine-specific packaging increase the productivity of planting machines by reducing seedling reloading time, they also increase logistics and investment costs. In this study, we analyzed the total cost of outplanting seedlings with an excavator-mounted Bracke Planter and seedlings packed according to four different concepts: cultivation trays, cardboard boxes, band-mounted seedlings in cardboard boxes and linked pots in container modules. The total cost per planted seedling was calculated for each packaging system as the sum of all costs from nursery to the recovery of empty packaging. The results showed that today’s system of transporting seedlings in cultivation trays is the most cost-efficient of the four alternatives. Machine-specific seedling packaging was 16–23% costlier per planted seedling than cultivation trays when trucking distances were 100 km. Sensitivity analyses indicated that machine-specific seedling packaging increased in cost-efficiency relative to cultivation trays primarily when more planting machines were contracted, but also as planting machine fixed costs and productivity increased. Moreover, the relative cost-efficiency of band-mounted seedlings, but not seedlings in container modules, increased with increasing trucking distance. Thus, we show that investments in machine-specific seedling packaging for today’s planting machines are justified only when the fixed costs, productivity and number of contracted planting machines increase substantially.
  • Ersson, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden E-mail: back.tomas.ersson@slu.se (email)
  • Bergsten, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden E-mail: ub@nn.se
  • Lindroos, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden E-mail: ol@nn.se
article id 107, category Research article
Jaana Luoranen, Risto Rikala, Heikki Smolander. (2011). Machine planting of Norway spruce by Bracke and Ecoplanter: an evaluation of soil preparation, planting method and seedling performance. Silva Fennica vol. 45 no. 3 article id 107. https://doi.org/10.14214/sf.107
Keywords: Picea abies; height growth; machine planting; mechanized forestry; mounding; quality of planting; survival
Abstract | View details | Full text in PDF | Author Info
We evaluated the effects of planting date and planting machine (Bracke: three machines, 69 regeneration areas in three years; Ecoplanter: six areas, two years) on the quality and field performance one and three years after planting of Norway spruce (Picea abies (L.) Karst.) seedlings in central Finland. Both machine types planted on average 1800 seedlings per hectare, and after three years approximately 1600 (Bracke) and 1200 (Ecoplanter) were still alive. This study suggests that planting with a Bracke machine can achieve better regeneration rates than those observed in privately-owned Finnish forests. We characterized the quality of mounding and planting with the Bracke machine as excellent and that of the Ecoplanter as good. The soil preparation method of the Ecoplanter produced humus-rich mounds where seedlings were susceptible to pine weevils and consequently suffered higher mortality. Different machines were used in different regional areas and each machine was operated by different driver/s which may have influenced the results. No negative effects of planting date were observed. Seedling growth decreased if they were tall in relation to their root plug volume, grown too densely in the nursery, and if stored in the field for several months prior to planting. We conclude that mechanized planting is successful when the soil preparation method produces mounds covered by purely mineral soil. Planting from May to the end of September is suitable for seedlings intended for use during this period.
  • Luoranen, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: jaana.luoranen@metla.fi (email)
  • Rikala, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: rr@nn.fi
  • Smolander, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: hs@nn.fi
article id 125, category Research article
Juho Rantala, Tiina Laine. (2010). Productivity of the M-Planter tree-planting device in practice. Silva Fennica vol. 44 no. 5 article id 125. https://doi.org/10.14214/sf.125
Keywords: silviculture; cost-efficiency; mechanisation; planting; seedling; technology
Abstract | View details | Full text in PDF | Author Info
Need to mechanise tree-planting work have recently increased for many reasons. The newest planting and soil scarification device performing work in Nordic forests is the Finnish M-Planter. This study aims to clarify M-Planter’s productivity in practice and show how various factors affect it. The follow-up data set covers 607 work shifts, of 13 operators with, in total, five M-Planters. The average productivity figures for the operators were 143 and 169 seedlings per effective working hour during the first and second planting season, respectively. Overall, the measured average productivity was 34.2% lower than that observed in an earlier work study of the M-Planter based on an experimental study design. On average, the operators learned to use the combination of the M-Planter and a base machine more efficiently while their experience in using it increased during the follow-up. Increasing number of stones and stumps as well as a thicker humus layer decreased productivity of the M-Planter. The study concludes that utilisation of the full productivity potential of the M-Planter requires not only good operators but also development of the whole planting service supply chain.
  • Rantala, Finnish Forest Research Institute, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: juho.rantala@metla.fi (email)
  • Laine, Finnish Forest Research Institute, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: tl@nn.fi
article id 186, category Research article
Juho Rantala, Pertti Harstela, Veli-Matti Saarinen, Leo Tervo. (2009). A techno-economic evaluation of Bracke and M-planter tree planting devices. Silva Fennica vol. 43 no. 4 article id 186. https://doi.org/10.14214/sf.186
Keywords: productivity; cost-efficiency; mechanization; planting cost
Abstract | View details | Full text in PDF | Author Info
Techno-economically reasonable mechanization of tree planting has proved to be a difficult task in the Nordic working conditions. Although planting machines and combinations of base machine and planting device have been developed since the 1970s, mechanized planting has not been cost-competitive to manual planting. The aim of this study was to find out work time distributions, productivities, costs and effects of different work difficulty factors on productivities and costs of the state-of-the-art Nordic planting devices, Swedish Bracke and Finnish M-Planter, and to compare the devices with each other. The theory of comparative time studies was the base for the experimental design of this study. In the average working conditions, productivity (E15) of M-Planter (236 seedlings/hour) was 36.0% higher than that of Bracke (174 seedlings/hour). Here, M-Planter performed planting work 23.4% cheaper than Bracke. However, the difference depended greatly on the working conditions; the more stones or stumps the smaller the difference, and the more slash the bigger the difference.
  • Rantala, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: juho.rantala@metla.fi (email)
  • Harstela, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: ph@nn.fi
  • Saarinen, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: vms@nn.fi
  • Tervo, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: lt@nn.fi
article id 214, category Research article
Michelle de Chantal, Hannu Rita, Urban Bergsten, Mikaell Ottosson Löfvenius, Harald Grip. (2009). Frost heaving of Picea abies seedlings as influenced by soil preparation, planting technique, and location along gap-shelterwood gradients. Silva Fennica vol. 43 no. 1 article id 214. https://doi.org/10.14214/sf.214
Keywords: deep planting; normal planting; mobile container; fixed container; HuMinMix; soil horizon
Abstract | View details | Full text in PDF | Author Info
The effects of soil preparation, planting technique and location along gap-shelterwood gradients (position and orientation) on frost heaving damage to seedlings were studied in Vindeln Experimental Forests, northern Sweden. The forest was harvested in a grid pattern in winter 2004–2005, forming gaps and shelterwood areas of 30 x 40 m each. Gap-shelterwood gradients were delimited in four orientations and subdivided into five positions: 7 m and 15 m into the gap and shelterwood, and at the gap edge. At each position, three replicates of three soil preparations were made: exposed E and B horizons and HuMinMix (milled vegetation and humus layers mixed with surface mineral soil). In early October 2005, one-year-old containerized Picea abies (L.) Karst. seedlings were planted using four techniques: normal and deep planting, and mobile and fixed experimental containers. After one winter, frost heaving damage was highest for seedlings on B horizon combined with the mobile container (51 ± 6%) and normal planting (43±6%). Normal- or deep-planted seedlings in HuMinMix had the least damage (5–6.6 ± 2.5%). Compared to normal planting, deep planting reduced frost heaving damage only on B horizon. When considering the orientation, seedlings in the experimental containers had more or similar frost heaving damage than normal- or deep-planted seedlings. Along the eastern gradient, seedlings incurred more frost heaving damage in the center of the gap than under the canopy.
  • Chantal, University of Helsinki, Dept of Forest Ecology & Dept of Forest Resource Management, Helsinki, Finland E-mail: michelle.dechantal@helsinki.fi (email)
  • Rita, University of Helsinki, Dept of Forest Ecology & Dept of Forest Resource Management, Helsinki, Finland E-mail: hr@nn.fi
  • Bergsten, Swedish University of Agricultural Sciences, Dept of Forest Ecology and Management, Umeå, Sweden E-mail: ub@nn.se
  • Löfvenius, Swedish University of Agricultural Sciences, Dept of Forest Ecology and Management, Umeå, Sweden E-mail: mol@nn.se
  • Grip, Swedish University of Agricultural Sciences, Dept of Forest Ecology and Management, Umeå, Sweden E-mail: hg@nn.se
article id 263, category Research article
Aksel Granhus, Dag Fjeld. (2008). Time consumption of planting after partial harvests. Silva Fennica vol. 42 no. 1 article id 263. https://doi.org/10.14214/sf.263
Keywords: planting; work study; mechanical site preparation; partial cutting; scarification
Abstract | View details | Full text in PDF | Author Info
Partial harvesting combined with underplanting may be a means to reduce the risk of regeneration failure when e.g. unfavourable microclimatic conditions or severe damage by bark-feeding insects may be expected after clear-cutting, and to maintain or establish certain stand structures or tree species mixture. In this study, we performed time studies of manual planting with and without prior site preparation (patch scarification, inverting) in partially harvested stands of Norway spruce (Picea abies (L.) Karst.). The harvest treatments included basal area removals of approx. 35, 45, and 55%, and a patch clear-cut treatment that was assumed to provide the same conditions for planting as conventional clear-cutting. Site preparation had a much larger influence on time consumption plant–1 (main time) than the harvest treatment. The lowest time consumption was found with inverting and the highest without site preparation. The time spent on walking between planting spots increased with decreasing harvest intensity, reflecting a lower density of planted seedlings in the partially harvested stands. A corresponding increase in main time per plant only occurred after site preparation, since the time spent on clearing the planting spot (removal of logging residue and humus) on untreated plots was higher at the higher harvest strengths. The variation in time consumption attributed to the six replicate stands was large and mainly due to the difference among stands planted by different workers.
  • Granhus, Norwegian University of Life Sciences, Dept. of Ecology and Natural Resource Management (INA), P.O.Box 5003, NO-1432 Ås, Norway E-mail: aksel.granhus@umb.no (email)
  • Fjeld, Swedish University of Agricultural Sciences, Dept. of Forest Resource Management, SE-901 83 Umeå, Sweden E-mail: df@nn.se
article id 342, category Research article
Jaana Luoranen, Juha Lappi, Gang Zhang, Heikki Smolander. (2006). Field performance of hybrid aspen clones planted in summer. Silva Fennica vol. 40 no. 2 article id 342. https://doi.org/10.14214/sf.342
Keywords: survival; Populus; growth; hybrid aspen; micropropagation; planting date; root cutting; root egress; survivalgrowth
Abstract | View details | Full text in PDF | Author Info
We investigated the possibility to plant clonal hybrid aspen (Populus tremula x tremuloides) during the summer of propagation when the plants are 20–25 cm tall and only a few months old. In four experiments carried out in years 1998–2001, survival of summer-planted hybrid aspens was at least as high as that of hybrid aspen planted in autumn and spring. In all experiments, compared to planting in September or the following May, height growth was greater with planting in July and early August. Root egress of hybrid aspens planted in July and August was also greater than that of aspens planted in autumn or the following spring. Summer planting was thus possible both with plants produced by micropropagation and with those produced from root cuttings.
  • Luoranen, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: jaana.luoranen@metla.fi (email)
  • Lappi, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: lj@nn.fi
  • Zhang, College of Horticulture, Agricultural University of Hebei, Baoding, Hebei, China E-mail: gz@nn.cn
  • Smolander, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: hs@nn.fi
article id 361, category Research article
Jaana Luoranen, Risto Rikala, Kyösti Konttinen, Heikki Smolander. (2005). Extending the planting period of dormant and growing Norway spruce container seedlings to early summer. Silva Fennica vol. 39 no. 4 article id 361. https://doi.org/10.14214/sf.361
Keywords: Norway spruce; height growth; survival; planting date; carbohydrate; frozen storage; hot-lifting; root growth
Abstract | View details | Full text in PDF | Author Info
In order to make mechanized planting economically viable, the present spring planting period for Norway spruce (Picea abies (L.) Karst.) seedlings in Scandinavia needs to be extended. To evaluate the possibilities to extend the planting period, six field experiments were established in four years during which frozen-stored, dormant seedlings and actively growing seedlings targeted for spring planting were planted regularly from mid-May to mid-July or the end of August. The survival of actively growing seedlings did not differ between planting dates from mid-May to mid-July. For dormant seedlings, however, the later in summer they were planted the lower was the survival. Oversized seedlings grown in the nursery in containers of too small volume, which were usually planted after mid-June, resulted in reduced growth of seedlings after planting. Root egress (growth of roots from root plugs into the surrounding soil) was most rapid in July and early August and slowest in May and September. Results showed that with dormant seedlings the planting period can be extended from May to mid-June without increasing mortality or reducing growth. The planting period for seedlings stored outdoors and those seedlings that were already growing in June for the purpose of spring plantings can be extended even longer, but it must be kept in mind that the risk of mechanical damage and reduced growth increase due to brittleness of the shoot and increased height. Further research is needed to evaluate the risks in practical scale plantings and with seedlings that are specially targeted for planting after mid-June.
  • Luoranen, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: jaana.luoranen@metla.fi (email)
  • Rikala, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: rr@nn.fi
  • Konttinen, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: kk@nn.fi
  • Smolander, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: hs@nn.fi
article id 686, category Research article
Jean Yves Fraysse, Loïc Crémière. (1998). Nursery factors influencing containerized Pinus pinaster seedlings’ initial growth. Silva Fennica vol. 32 no. 3 article id 686. https://doi.org/10.14214/sf.686
Keywords: fertilization; nitrogen; nursery; growth; planting date; maritime pine; sowing date
Abstract | View details | Full text in PDF | Author Info
Maritime pine (Pinus pinaster) containerized seedlings were raised outdoors at different fertilizer regimes, sowing date or culture duration to assess nursery factors influencing first year growth in the field. Seedling biomass, and N, P and K content before outplanting were affected by these different factors but the one year field growth was more related to N concentration than with morphological traits. The results are discussed in view to improve the plant stock quality in nursery.
  • Fraysse, AFOCEL, Domaine de Sivaillan, 33480 Moulis-en-Médoc, France E-mail: sudouest@afocel.fr (email)
  • Crémière, AFOCEL, Domaine de Sivaillan, 33480 Moulis-en-Médoc, France E-mail: lc@nn.fr

Category : Research note

article id 421, category Research note
Pekka Helenius, Jaana Luoranen, Risto Rikala. (2004). Effect of thawing duration and temperature on field performance of frozen-stored Norway spruce container seedlings. Silva Fennica vol. 38 no. 3 article id 421. https://doi.org/10.14214/sf.421
Keywords: Picea abies; height growth; survival; frozen-planting; storage
Abstract | View details | Full text in PDF | Author Info
Increasing use of frozen storage in nurseries at northern latitudes calls for thawing methods that are safe, economical and easy to apply on a large scale. The easiest and most economical method would be to thaw seedlings in the same boxes they were stored in. However, doing this safely requires more knowledge about how long and at what temperatures seedlings should or can be kept in the boxes without reducing field performance. In this study, 1-yr-old frozen-stored Norway spruce (Picea abies (L.) Karst.) container seedlings were thawed for 4, 8 or 16 days at 4 or 12 °C in cardboard boxes before planting on a reforestation site and on experimental field in mid-June. Some seedlings were also planted on these locations after thawing for only 7 hours at 12 °C in order to separate frozen root plugs. We found some evidence that planting seedlings after short thawing periods (7 hours at 12 °C and 4 days at 4 °C), under which conditions the root plugs remain completely or partly frozen, has a negative effect on field performance of Norway spruce seedlings. Thawing over a 4-8 day period in cardboard boxes at ca. 12 °C appears to ensure complete thawing of the root plugs and unaffected field performance, but is short enough to prevent the growth of mould.
  • Helenius, Finnish Forest Research Institute, Suonenjoki Research Station, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: pekka.helenius@metla.fi (email)
  • Luoranen, Finnish Forest Research Institute, Suonenjoki Research Station, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: jl@nn.fi
  • Rikala, Finnish Forest Research Institute, Suonenjoki Research Station, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: rr@nn.fi

Click this link to register to Silva Fennica.
If you are a registered user, log in to save your selected articles for later access.
Sign up to receive alerts of new content
Your selected articles