Current issue: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17^th
PlanS compliant

Articles containing the keyword 'biofuel'

Category : Research article

article id 23001, category Research article

Eirik Ogner Jåstad, Niels Oliver Nagel, Junhui Hu, Per Kristian Rørstad. (2023). The location and capacity-dependent price impacts of biofuel production and its effect on the forest industry. Silva Fennica vol. 57 no. 1 article id 23001. https://doi.org/10.14214/sf.23001

Keywords: partial equilibrium model; biofuel location policy; biomass supply; forest-based biofuel; nordic forest sector

Highlights: Large biofuel units prefer regions close to transportation facilities; Forest owners are the main winners if large-scale biofuel production is established; The first production units reduce export, hence should be located at an exporting hub; Biofuel production will reduce the Norwegian export of roundwood to Sweden; Biofuel production increases the local demand and pulpwood prices.

Abstract | Full text in HTML | Full text in PDF | Author Info

Forest-based biofuel stands out as a promising solution to avoid fossil emissions in parts of the transport sector. Biofuel production will need large amounts of forest biomass, collected from a large area. Roundwood is costly to transport compared with other goods. Therefore, the location of forest-based biofuel production is a crucial part of an investment decision. This study analyses the optimal location of biofuel plants in Norway and the implications for the traditional forest sector in the Nordic countries. We test different numbers of production units, different sizes of the units, and various raw materials. The study applies a partial equilibrium model that covers the Norwegian and Nordic forest sectors, with 356 regions in Norway. The results indicate that small biofuel plants have the potential to turn exporting regions into importing regions. Larger biofuel plants are suitable for areas with large harvest activity today or regions with access to harbour or timber terminals along railways. We find that forest owners close to a biofuel plant will profit the most from biofuel production. Policymakers and investors should take into account that different locations and production capacities have different impacts on the forest sectors.

Jåstad, Faculty of Environmental Sciences and Natural Resource Management, Norwegian University of Life Sciences, P.O. Box 5003, NO-1432 Ås, Norway https://orcid.org/0000-0002-1089-0284 E-mail: eirik.jastad@nmbu.no
Nagel, Faculty of Environmental Sciences and Natural Resource Management, Norwegian University of Life Sciences, P.O. Box 5003, NO-1432 Ås, Norway https://orcid.org/0000-0002-3171-0262 E-mail: niels.oliver.nagel@nmbu.no
Hu, Faculty of Environmental Sciences and Natural Resource Management, Norwegian University of Life Sciences, P.O. Box 5003, NO-1432 Ås, Norway https://orcid.org/0000-0003-0001-5993 E-mail: junhui.hu@nmbu.no
Rørstad, Faculty of Environmental Sciences and Natural Resource Management, Norwegian University of Life Sciences, P.O. Box 5003, NO-1432 Ås, Norway E-mail: per.kristian.rorstad@nmbu.no

article id 6993, category Research article

Lars Fridh, Lars Eliasson, Dan Bergström. (2018). Precision and accuracy in moisture content determination of wood fuel chips using a handheld electric capacitance moisture meter. Silva Fennica vol. 52 no. 5 article id 6993. https://doi.org/10.14214/sf.6993

Keywords: heating value; biofuels; payment

Highlights: The studied capacitance meter can provide accurate estimates of mean moisture content for chips with M < 50% if a large sample is taken; It should be possible to use the capacitance meter to measure moisture content even for calculating payments depending of the needed accuracy; However a calibration function for each assortment is needed.

Abstract | Full text in HTML | Full text in PDF | Author Info

According to the Swedish Timber Measurement Act, measurements affecting payments for wood fuels to landowners must be accurate and precise. In this regard, moisture content is an important quality parameter for wood chips which influences the net calorific value as received and thus the economic value. As standard practice moisture content is determined with the oven-drying method, which is cumbersome to use for deliveries to facilities without drying-ovens, which in turn necessitates that samples are taken elsewhere for measurement. An alternative solution is to use a portable moisture meter. Our aim was to evaluate the precision of a handheld capacitance moisture meter. Accuracy and precision of a capacitance meter was determined in the lab and a calibration function was made. Thereafter, the calibrated moisture meter was compared with the standard method for moisture content determination of truckloads of chips. The capacitance meter showed a moderate accuracy by underestimating moisture content by 6.0 percentage points (pp), compared to the reference method, at a precision of ±3.8 pp (CI 95%). For chips with M > 50%, both accuracy and precision decreased. Calibration increased the accuracy in the follow up study by 3 pp for chips with M < 50% but could not be made for wetter chips. The oven-drying method and the capacitance meter can provide equally accurate estimates of mean moisture content for chips with M < 50% if a larger sample is taken with the latter. It should be possible to use capacitance meters to measure moisture content even when used to calculate payments depending of the needed accuracy. A calibration function for each assortment is needed.

Fridh, Skogforsk, The Forestry Research Institute of Sweden, Uppsala Science Park, 751 83 Uppsala, Sweden; Skogsägarna Mellanskog, Uppsala Science Park, Box 127, 751 04 Uppsala, Sweden http://orcid.org/0000-0002-4721-1193 E-mail: lars.fridh@mellanskog.se
Eliasson, Skogforsk, The Forestry Research Institute of Sweden, Uppsala Science Park, 751 83 Uppsala, Sweden http://orcid.org/0000-0002-2038-9864 E-mail: lars.eliasson@skogforsk.se
Bergström, Swedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, S-901 83 Umeå, Sweden E-mail: dan.bergstrom@slu.se

article id 53, category Research article

Saana Kataja-aho, Aino Smolander, Hannu Fritze, Sini Norrgård, Jari Haimi. (2012). Responses of soil carbon and nitrogen transformations to stump removal. Silva Fennica vol. 46 no. 2 article id 53. https://doi.org/10.14214/sf.53

Keywords: biofuel; boreal forest; carbon; nitrogen; nutrient dynamics; stump removal

Abstract | View details | Full text in PDF | Author Info

We studied in central Finland whether stump harvesting after clear felling of coniferous forest poses further short-term changes in soil carbon and nitrogen dynamics when compared to the traditional site preparation method, mounding. Exposed mineral soil patches in Norway spruce (Picea abies) dominated clear-cut stands were sampled 1–5 years after the treatments. The extent of the exposed mineral soil surface was significantly larger at the stump removal sites when compared to the mounding sites. No differences were found in soil pH, organic matter content or total concentration of soil C between the treatments or treatment years. Total concentration of soil N was consistently higher and C:N ratio lower in the stump removal plots than in the mounded plots. Further, both net N mineralisation and nitrification were clearly increased in the stump removal plots one year after the treatments. Soil microbial activity (CO₂ production) was higher in the stump removal plots but similar difference was not found in sieved soil samples incubated in the laboratory. Fluxes of other important greenhouse gases (CH₄ and N₂O) did not seem to be affected by stump removal. The differences between the stump removal and mounding procedures were most obviously attributed to more substantial soil disturbance by stump pulling and/or differences in the microbial communities and quality of soil organic matter in the differently treated soil.

Kataja-aho, University of Jyväskylä, Dept. of Biological and Environmental Science, Jyväskylä, Finland E-mail: saana.m.kataja-aho@jyu.fi
Smolander, Finnish Forest Research Institute, Vantaa, Finland E-mail: as@nn.fi
Fritze, Finnish Forest Research Institute, Vantaa, Finland E-mail: hf@nn.fi
Norrgård, University of Jyväskylä, Dept. of Biological and Environmental Science, Jyväskylä, Finland E-mail: sn@nn.fi
Haimi, University of Jyväskylä, Dept. of Biological and Environmental Science, Jyväskylä, Finland E-mail: jh@nn.fi

article id 318, category Research article

Sofia Backéus, Peder Wikström, Tomas Lämås. (2006). Modeling carbon sequestration and timber production in a regional case study. Silva Fennica vol. 40 no. 4 article id 318. https://doi.org/10.14214/sf.318

Keywords: boreal forest; carbon sequestration; optimization; forest biofuel; forest management planning

Abstract | View details | Full text in PDF | Author Info

Forests make up large ecosystems and by the uptake of carbon dioxide can play an important role in mitigating the greenhouse effect. In this study, mitigation of carbon emissions through carbon uptake and storage in forest biomass and the use of forest biofuel for fossil fuel substitution were considered. The analysis was performed for a 3.2 million hectare region in northern Sweden. The objective was to maximize net present value for harvested timber, biofuel production and carbon sequestration. A carbon price for build-up of carbon storage and for emissions from harvested forest products was introduced to achieve an economic value for carbon sequestration. Forest development was simulated using an optimizing stand-level planning model, and the solution for the whole region was found using linear programming. A range of carbon prices was used to study the effect on harvest levels and carbon sequestration. At a zero carbon price, the mean annual harvest level was 5.4 million m³, the mean annual carbon sequestration in forest biomass was 1.48 million tonnes and the mean annual replacement of carbon from fossil fuel with forest biofuel was 61 000 tonnes. Increasing the carbon price led to decreasing harvest levels of timber and decreasing harvest levels of forest biofuel. Also, thinning activities decreased more than clear-cut activities when the carbon prices increased. The level of carbon sequestration was governed by the harvest level and the site productivity. This led to varying results for different parts of the region.

Backéus, SLU, Dept. of Forest Resource Management and Geomatics, SE-901 83 Umeå, Sweden E-mail: sofia.backeus@resgeom.slu.se
Wikström, SLU, Dept. of Forest Resource Management and Geomatics, SE-901 83 Umeå, Sweden E-mail: pw@nn.se
Lämås, SLU, Dept. of Forest Resource Management and Geomatics, SE-901 83 Umeå, Sweden E-mail: tl@nn.se

article id 317, category Research article

Erik Eriksson, Tord Johansson. (2006). Effects of rotation period on biomass production and atmospheric CO2 emissions from broadleaved stands growing on abandoned farmland. Silva Fennica vol. 40 no. 4 article id 317. https://doi.org/10.14214/sf.317

Keywords: biomass; biofuel; carbon stock; abandoned farmland; atmospheric CO2; broadleaved trees; MAI

Abstract | View details | Full text in PDF | Author Info

The growth rates and carbon stocks of unthinned young and mature stands of broadleaved trees growing on abandoned farmland were determined to assess whether their management regimes should involve short (15-year) or long (45-year) rotations to maximize biomass production and reductions of CO₂ emissions. Dry mass production and mean annual increment (MAI) were calculated for 28 young stands and 65 mature stands of European aspen (Populus tremula L.), common alder (Alnus glutinosa (L.) Gaertn.), grey alder (Alnus incana (L.) Moench.), silver birch (Betula pendula Roth) and downy birch (Betula pubescens Ehrh.) ranging in latitude from 57° to 63° N in Sweden. The potential for using biomass from the stands to replace coal as a fuel and to store carbon was then evaluated both in short and long rotation scenarios. The results indicate that long rotations are beneficial if the objective is to maximize the average carbon stock in biomass. If, on the other hand, the intention is to optimize reductions in atmospheric CO₂ emissions, rotations should be short for aspen, silver birch and grey alder stands. For downy birch and common alder, the MAI was higher for the mature stands than the young stands, indicating that in these species the mature stands are superior for both storing carbon and replacing fossil fuel. Stands of broadleaved trees grown to produce biofuel on abandoned farmland should be established on fertile soils to promote high MAI. If the MAI is low, the rotation period should be long to maximize the average carbon stock.

Eriksson, SLU, Dept of Bioenergy, P.O. Box 7061, SE-750 07 Uppsala, Sweden E-mail: ee@nn.se
Johansson, SLU, Dept of Bioenergy, P.O. Box 7061, SE-750 07 Uppsala, Sweden E-mail: tj@nn.se

Category : Review article

article id 249, category Review article

Rimvydas Vasaitis, Jan Stenlid, Iben M. Thomsen, Pia Barklund, Anders Dahlberg. (2008). Stump removal to control root rot in forest stands. A literature study. Silva Fennica vol. 42 no. 3 article id 249. https://doi.org/10.14214/sf.249

Keywords: biofuel; stand growth; Armillaria; forest disturbance; Heterobasidion; Phellinus weirii

Abstract | View details | Full text in PDF | Author Info

Tree stumps are expected to be increasingly used for energy production in Fennoscandia, thus environmental consequences of stump removal from forest land must be assessed. Aim of this work was to compile available data on the efficacy of stump removal in eradication of root rot fungi (Heterobasidion, Armillaria, and Phellinus), and to review its potential impacts on establishment and productivity of next forest generation. Site disturbance and some technical and economical aspects are discussed, and needs for future research outlined in northern European context. The review demonstrates that stump removal from clear-felled forest areas in most cases results in, a) reduction of root rot in the next forest generation, b) improved seedling establishment, and c) increased tree growth and stand productivity. Observed disturbances caused to a site by stumping operations are normally acceptable. The available data strongly suggests that possibly many (if achievable, all) rot-containing stumps must be removed during harvesting of stumps. Provided equal availability, the priority should be given for stump removal from root rot-infested forest areas, instead of healthy ones. As most studies were done in North America and Britain, several questions must be yet answered under Fennoscandian conditions: a) if and to which extent the conventional stump removal for biofuel on clear-felled sites could reduce the occurrence of Heterobasidion and Armillaria in the next forest generation, b) what impact is it likely to have on survival of replanted tree seedlings, and c) what consequences will there be for growth and productivity of next forest generation.

Vasaitis, Department of Forest Mycology & Pathology, Swedish University of Agricultural Sciences, P.O. Box 7026, SE-75007 Uppsala, Sweden E-mail: rimvys.vasaitis@mykopat.slu.se
Stenlid, Department of Forest Mycology & Pathology, Swedish University of Agricultural Sciences, P.O. Box 7026, SE-75007 Uppsala, Sweden E-mail: js@nn.se
Thomsen, Forest & Landscape, University of Copenhagen, Hoersholm Kongevej 11, DK-2970 Hoersholm, Denmark E-mail: imt@nn.dk
Barklund, Department of Forest Mycology & Pathology, Swedish University of Agricultural Sciences, P.O. Box 7026, SE-75007 Uppsala, Sweden E-mail: pb@nn.se
Dahlberg, Swedish Species Information Centre, Swedish University of Agricultural Sciences, P.O. Box 7007, SE-75007 Uppsala, Sweden E-mail: ad@nn.se

Click this link to register to Silva Fennica.

If you are a registered user, log in to save your selected articles for later access.

Contents alert

Your selected articles

Follow @SilvaFennica