Showing 1–34 of 34 results for author: Howe, J

Anomalous properties of spark plasma sintered boron nitride solids

Authors: Abhijit Biswas, Peter Serles, Gustavo A. Alvarez, Jesse Schimpf, Michel Hache, Jonathan Kong, Pedro Guerra Demingos, Bo Yuan, Tymofii S. Pieshkov, Chenxi Li, Anand B. Puthirath, Bin Gao, Tia Gray, Xiang Zhang, Jishnu Murukeshan, Robert Vajtai, Pengcheng Dai, Chandra Veer Singh, Jane Howe, Yu Zou, Lane W. Martin, James Patrick Clancy, Zhiting Tian, Tobin Filleter, Pulickel M. Ajayan

Abstract: Hexagonal boron nitride (h-BN) is brittle, however, its atomic-scale structural engineering can lead to unprecedented physical properties. Here we report the bulk synthesis of high-density crystalline h-BN solids by using high-temperature spark plasma sintering (SPS) of micron size h-BN powders. In addition to the high mechanical strength and ductile response of such materials, we have obtained an… ▽ More Hexagonal boron nitride (h-BN) is brittle, however, its atomic-scale structural engineering can lead to unprecedented physical properties. Here we report the bulk synthesis of high-density crystalline h-BN solids by using high-temperature spark plasma sintering (SPS) of micron size h-BN powders. In addition to the high mechanical strength and ductile response of such materials, we have obtained anomalous values of dielectric constant beyond theoretical limits, high thermal conductivity, and exceptional neutron radiation shielding capability. Through exhaustive characterizations we reveal that SPS induces non-basal plane crystallinity, twisting of layers, and facilitates inter-grain fusion with a high degree of in-plane alignment across macroscale dimensions, resulting in near-theoretical density and anomalous properties. Our findings highlight the importance of material design, via new approaches such as twisting and interconnections between atomically thin layers, to create novel ceramics with properties that could go beyond their intrinsic theoretical predictions. △ Less

Submitted 10 July, 2024; v1 submitted 9 May, 2024; originally announced May 2024.

Comments: Authors revised version, 46 pages, 4 figures

Ultrafast In vivo Transient Absorption Spectroscopy

Authors: Tomi K. Baikie, Darius Kosmützky, Joshua M. Lawrence, Victor Gray, Christoph Schnedermann, Robin Horton, Joel D. Collins, Hitesh Medipally, Bartosz Witek, Marc M. Nowaczyk, Jenny Zhang, Laura Wey, Christopher J. Howe, Akshay Rao

Abstract: Transient absorption (TA) spectroscopy has proved fundamental to our understanding of energy and charge transfer in biological systems, allowing measurements of photoactive proteins on sub-picosecond timescales. Recently, ultrafast TA spectroscopy has been applied in vivo, providing sub-picosecond measurements of photosynthetic light harvesting and electron transfer processes within living photosy… ▽ More Transient absorption (TA) spectroscopy has proved fundamental to our understanding of energy and charge transfer in biological systems, allowing measurements of photoactive proteins on sub-picosecond timescales. Recently, ultrafast TA spectroscopy has been applied in vivo, providing sub-picosecond measurements of photosynthetic light harvesting and electron transfer processes within living photosynthetic microorganisms. The analysis of the resultant data is hindered by the number of different photoactive pigments and the associated complexity of photoactive reaction schemes within living cells. Here we show how in vivo ultrafast TA spectroscopy can be applied to a diverse array of organisms from the tree of life, both photosynthetic and non-photosynthetic. We have developed a series of software tools for performing global, lifetime and target analysis of in vivo TA datasets. These advances establish in vivo TA spectroscopy as a versatile technique for studying energy and charge transfer in living systems. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Comments: 39 pages

EvolvingBehavior: Towards Co-Creative Evolution of Behavior Trees for Game NPCs

Authors: Nathan Partlan, Luis Soto, Jim Howe, Sarthak Shrivastava, Magy Seif El-Nasr, Stacy Marsella

Abstract: To assist game developers in crafting game NPCs, we present EvolvingBehavior, a novel tool for genetic programming to evolve behavior trees in Unreal Engine 4. In an initial evaluation, we compare evolved behavior to hand-crafted trees designed by our researchers, and to randomly-grown trees, in a 3D survival game. We find that EvolvingBehavior is capable of producing behavior approaching the desi… ▽ More To assist game developers in crafting game NPCs, we present EvolvingBehavior, a novel tool for genetic programming to evolve behavior trees in Unreal Engine 4. In an initial evaluation, we compare evolved behavior to hand-crafted trees designed by our researchers, and to randomly-grown trees, in a 3D survival game. We find that EvolvingBehavior is capable of producing behavior approaching the designer's goals in this context. Finally, we discuss implications and future avenues of exploration for co-creative game AI design tools, as well as challenges and difficulties in behavior tree evolution. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Comments: 13 pages, 5 figures. Accepted for publication in Foundations of Digital Games 2022 (FDG '22)

ACM Class: I.2.1; D.2.2

Direct Visualization of Localized Vibrations at Complex Grain Boundaries

Authors: Eric R. Hoglund, De-Liang Bao, Andrew O'Hara, Thomas W. Pfeifer, Md Shafkat Bin Hoque, Sara Makarem, James M. Howe, Sokrates T. Pantelides, Patrick E. Hopkins, Jordan A. Hachtel

Abstract: Grain boundaries (GBs) are a prolific microstructural feature that dominates the functionality of a wide class of materials. The change in functionality at a GB is a direct result of unique local atomic arrangements, different from those in the grain, that have driven extensive experimental and theoretical studies correlating atomic-scale GB structures to macroscopic electronic, infrared-optical,… ▽ More Grain boundaries (GBs) are a prolific microstructural feature that dominates the functionality of a wide class of materials. The change in functionality at a GB is a direct result of unique local atomic arrangements, different from those in the grain, that have driven extensive experimental and theoretical studies correlating atomic-scale GB structures to macroscopic electronic, infrared-optical, and thermal properties. Here, we examine a SrTiO3 GB using atomic-resolution aberration-corrected scanning transmission electron microscopy (STEM) and ultra-high-energy-resolution monochromated electron energy-loss spectroscopy (EELS), in conjunction with density functional theory (DFT) calculations. This combination enables the direct correlation of the GB structure, composition, and chemical bonding with atomic vibrations within the GB dislocation-cores. We observe that nonstoichiometry and changes in coordination and bonding at the GB leads to a redistribution of vibrational states at the GB and its dislocation-cores relative to the bounding grains. The access to localized vibrations within GBs provided by ultrahigh spatial/spectral resolution EELS correlated with atomic coordination, bonding, and stoichiometry and validated by theory, provides a direct route to quantifying the impact of individual boundaries on macroscopic properties. △ Less

Submitted 24 August, 2022; v1 submitted 30 July, 2022; originally announced August 2022.

Comments: 41 pages, 15 figures

The Target Study: A Conceptual Model and Framework for Measuring Disparity

Authors: John W. Jackson, Yea-Jen Hsu, Raquel C. Greer, Romsai T. Boonyasai, Chanelle J. Howe

Abstract: We present a conceptual model to measure disparity--the target study--where social groups may be similarly situated (i.e., balanced) on allowable covariates. Our model, based on a sampling design, does not intervene to assign social group membership or alter allowable covariates. To address non-random sample selection, we extend our model to generalize or transport disparity or to assess disparity… ▽ More We present a conceptual model to measure disparity--the target study--where social groups may be similarly situated (i.e., balanced) on allowable covariates. Our model, based on a sampling design, does not intervene to assign social group membership or alter allowable covariates. To address non-random sample selection, we extend our model to generalize or transport disparity or to assess disparity after an intervention on eligibility-related variables that eliminates forms of collider-stratification. To avoid bias from differential timing of enrollment, we aggregate time-specific study results by balancing calendar time of enrollment across social groups. To provide a framework for emulating our model, we discuss study designs, data structures, and G-computation and weighting estimators. We compare our sampling-based model to prominent decomposition-based models used in healthcare and algorithmic fairness. We provide R code for all estimators and apply our methods to measure health system disparities in hypertension control using electronic medical records. △ Less

Submitted 16 March, 2024; v1 submitted 1 July, 2022; originally announced July 2022.

Comments: Completely re-written for a clearer and more formal presentation with added results for generalizability and transportability and a more detailed comparison to alternative models

Photosynthesis re-wired on the pico-second timescale

Authors: Tomi K. Baikie, Laura T. Wey, Hitesh Medipally, Erwin Reisner, Marc M. Nowaczyk, Richard H. Friend, Christopher J. Howe, Christoph Schnedermann, Akshay Rao, Jenny Z. Zhang

Abstract: Photosystems II and I (PSII and PSI) are the reaction centre complexes that drive the light reactions of photosynthesis. PSII performs light-driven water oxidation (quantum efficiencies and catalysis rates of up to 80% and 1000 $e^{-}\text{s}^{-1}$, respectively) and PSI further photo-energises the harvested electrons (quantum efficiencies of ~100%). The impressive performance of the light harvest… ▽ More Photosystems II and I (PSII and PSI) are the reaction centre complexes that drive the light reactions of photosynthesis. PSII performs light-driven water oxidation (quantum efficiencies and catalysis rates of up to 80% and 1000 $e^{-}\text{s}^{-1}$, respectively) and PSI further photo-energises the harvested electrons (quantum efficiencies of ~100%). The impressive performance of the light harvesting components of photosynthesis has motivated extensive biological, artificial and biohybrid approaches to re-wire photosynthesis to enable higher efficiencies and new reaction pathways, such as H2 evolution or alternative CO2 fixation. To date these approaches have focussed on charge extraction at the terminal electron quinones of PSII and terminal iron-sulfur clusters of PSI. Ideally electron extraction would be possible immediately from the photoexcited reaction centres to enable the greatest thermodynamic gains. However, this was believed to be impossible because the reaction centres are buried around 4 nm within PSII and 5 nm within PSI from the cytoplasmic face. Here, we demonstrate using in vivo ultrafast transient absorption (TA) spectroscopy that it is possible to extract electrons directly from photoexcited PSI and PSII, using both live cyanobacterial cells and isolated photosystems, with the exogenous electron mediator 2,6-dichloro1,4-benzoquinone (DCBQ). We postulate that DCBQ can oxidise peripheral chlorophyll pigments participating in highly delocalised charge transfer (CT) states after initial photoexcitation. Our results open new avenues to study and re-wire photosynthesis for bioenergy and semi-artificial photosynthesis. △ Less

Submitted 7 February, 2022; v1 submitted 31 January, 2022; originally announced January 2022.

Design-Driven Requirements for Computationally Co-Creative Game AI Design Tools

Authors: Nathan Partlan, Erica Kleinman, Jim Howe, Sabbir Ahmad, Stacy Marsella, Magy Seif El-Nasr

Abstract: Game AI designers must manage complex interactions between the AI character, the game world, and the player, while achieving their design visions. Computational co-creativity tools can aid them, but first, AI and HCI researchers must gather requirements and determine design heuristics to build effective co-creative tools. In this work, we present a participatory design study that categorizes and a… ▽ More Game AI designers must manage complex interactions between the AI character, the game world, and the player, while achieving their design visions. Computational co-creativity tools can aid them, but first, AI and HCI researchers must gather requirements and determine design heuristics to build effective co-creative tools. In this work, we present a participatory design study that categorizes and analyzes game AI designers' workflows, goals, and expectations for such tools. We evince deep connections between game AI design and the design of co-creative tools, and present implications for future co-creativity tool research and development. △ Less

Submitted 29 July, 2021; originally announced July 2021.

Comments: 12 pages, 1 figure. Accepted for publication in Foundations of Digital Games (FDG) 2021

ACM Class: I.2.1; H.5.2

Nanoscale Phonon Spectroscopy Reveals Emergent Interface Vibrational Structure of Superlattices

Authors: Eric R. Hoglund, De-Liang Bao, Andrew O'Hara, Sara Makarem, Zachary T. Piontkowski, Joseph R. Matson, Ajay K. Yadav, Ryan C. Haisimaier, Roman Engel-Herbert, Jon F. Ihlefeld, Jayakanth Ravichandran, Ramamoorthy Ramesh, Joshua D. Caldwell, Thomas E. Beechem, John A. Tomko, Jordan A. Hachtel, Sokrates T. Pantelides, Patrick E. Hopkins, James M. Howe

Abstract: As the length-scales of materials decrease, heterogeneities associated with interfaces approach the importance of the surrounding materials. Emergent electronic and magnetic interface properties in superlattices have been studied extensively by both experiments and theory. $^{1-6}$ However, the presence of interfacial vibrations that impact phonon-mediated responses, like thermal conductivity… ▽ More As the length-scales of materials decrease, heterogeneities associated with interfaces approach the importance of the surrounding materials. Emergent electronic and magnetic interface properties in superlattices have been studied extensively by both experiments and theory. $^{1-6}$ However, the presence of interfacial vibrations that impact phonon-mediated responses, like thermal conductivity $^{7,8}$, has only been inferred in experiments indirectly. While it is accepted that intrinsic phonons change near boundaries $^{9,10}$, the physical mechanisms and length-scales through which interfacial effects influence materials remain unclear. Herein, we demonstrate the localized vibrational response associated with the interfaces in SrTiO$_3$-CaTiO$_3$ superlattices by combining advanced scanning transmission electron microscopy imaging and spectroscopy and density-functional-theory calculations. Symmetries atypical of either constituent material are observed within a few atomic planes near the interface. The local symmetries create local phonon modes that determine the global response of the superlattice once the spacing of the interfaces approaches the phonon spatial extent. The results provide direct visualization and quantification, illustrating the progression of the local symmetries and interface vibrations as they come to determine the vibrational response of an entire superlattice; stated differently, the progression from a material with interfaces, to a material dominated by interfaces, to a material of interfaces as the period decreases. Direct observation of such local atomic and vibrational phenomena demonstrates that their spatial extent needs to be quantified to understand macroscopic behavior. Tailoring interfaces, and knowing their local vibrational response, provides a means of pursuing designer solids having emergent infrared and thermal responses. △ Less

Submitted 4 October, 2021; v1 submitted 20 May, 2021; originally announced May 2021.

Comments: 38 pages, 3 figures, 10 supplemental figures

Journal ref: Nature 601, 556 (2022)

Interface controlled thermal properties of ultra-thin chalcogenide-based phase change memory devices

Authors: Kiumars Aryana, John T. Gaskins, Joyeeta Nag, Derek A. Stewart, Zhaoqiang Bai, Saikat Mukhopadhyay, John C. Read, David H. Olson, Eric R. Hoglund, James M. Howe, Ashutosh Giri, Michael K. Grobis, Patrick E. Hopkins

Abstract: Phase change memory (PCM) is a rapidly growing technology that not only offers advancements in storage-class memories but also enables in-memory data storage and processing towards overcoming the von Neumann bottleneck. In PCMs, the primary mechanism for data storage is thermal excitation. However, there is a limited body of research regarding the thermal properties of PCMs at length scales close… ▽ More Phase change memory (PCM) is a rapidly growing technology that not only offers advancements in storage-class memories but also enables in-memory data storage and processing towards overcoming the von Neumann bottleneck. In PCMs, the primary mechanism for data storage is thermal excitation. However, there is a limited body of research regarding the thermal properties of PCMs at length scales close to the memory cell dimension and, thus, the impact of interfaces on PCM operation is unknown. Our work presents a new paradigm to manage thermal transport in memory cells by manipulating the interfacial thermal resistance between the phase change unit and the electrodes without incorporating additional insulating layers. Experimental measurements show a substantial change in thermal boundary resistance as GST transitions from one crystallographic structure (cubic) to another (hexagonal) and as the thickness of tungsten contacts is reduced from five to two nanometers. Simulations reveal that interfacial resistance between the phase change unit and its adjacent layer can reduce the reset current for 20 and 120 nm diameter devices by up to ~40% and ~50%, respectively. The resultant phase-dependent and geometric effects on thermal boundary resistance dictate that the effective thermal conductivity of the phase change unit can be reduced by a factor of four, presenting a new opportunity to reduce operating currents in PCMs. △ Less

Submitted 10 November, 2020; originally announced November 2020.

Report number: Nature Communications 12, 774 (2021)

Nonlinear Attitude Filter on SO(3): Fast Adaptation and Robustness

Authors: Ajay Singh, Trenton S. Sieb, James H. Howe, Hashim A. Hashim

Abstract: Nonlinear attitude filters have been recognized to have simpler structure and better tracking performance when compared with Gaussian attitude filters and other methods of attitude determination. A key element of nonlinear attitude filter design is the selection of error criteria. The conventional design of nonlinear attitude filters has a trade-off between fast adaptation and robustness. In this… ▽ More Nonlinear attitude filters have been recognized to have simpler structure and better tracking performance when compared with Gaussian attitude filters and other methods of attitude determination. A key element of nonlinear attitude filter design is the selection of error criteria. The conventional design of nonlinear attitude filters has a trade-off between fast adaptation and robustness. In this work, a new functional approach based on fuzzy rules for on-line continuous tuning of the nonlinear attitude filter adaptation gain is proposed. The input and output membership functions are optimally tuned using artificial bee colony optimization algorithm taking into account both attitude error and rate of change of attitude error. The proposed approach results of high adaptation gain at large error and small adaptation gain at small error. Thereby, the proposed approach allows fast convergence properties with high measures of robustness. The simulation results demonstrate that the proposed approach offers robust and high convergence capabilities against large error in initialization and uncertain measurements. △ Less

Submitted 9 September, 2021; v1 submitted 17 August, 2020; originally announced August 2020.

Comments: 2020 IEEE 16th International Conference on Automation Science and Engineering (CASE)

Backjumping is Exception Handling

Authors: Ed Robbins, Andy King, Jacob M. Howe

Abstract: ISO Prolog provides catch and throw to realise the control flow of exception handling. This pearl demonstrates that catch and throw are inconspicuously amenable to the implementation of backjumping. In fact, they have precisely the semantics required: rewinding the search to a specific point, and carrying of a preserved term to that point. The utility of these properties is demonstrated through an… ▽ More ISO Prolog provides catch and throw to realise the control flow of exception handling. This pearl demonstrates that catch and throw are inconspicuously amenable to the implementation of backjumping. In fact, they have precisely the semantics required: rewinding the search to a specific point, and carrying of a preserved term to that point. The utility of these properties is demonstrated through an implementation of graph colouring with backjumping and a backjumping SAT solver that applies Conflict Driven Clause Learning. △ Less

Submitted 11 August, 2020; originally announced August 2020.

Journal ref: Theory and Practice of Logic Programming 21 (2021) 125-144

Conditional Generative Adversarial Networks for Data Augmentation and Adaptation in Remotely Sensed Imagery

Authors: Jonathan Howe, Kyle Pula, Aaron A. Reite

Abstract: The difficulty in obtaining labeled data relevant to a given task is among the most common and well-known practical obstacles to applying deep learning techniques to new or even slightly modified domains. The data volumes required by the current generation of supervised learning algorithms typically far exceed what a human needs to learn and complete a given task. We investigate ways to expand a g… ▽ More The difficulty in obtaining labeled data relevant to a given task is among the most common and well-known practical obstacles to applying deep learning techniques to new or even slightly modified domains. The data volumes required by the current generation of supervised learning algorithms typically far exceed what a human needs to learn and complete a given task. We investigate ways to expand a given labeled corpus of remote sensed imagery into a larger corpus using Generative Adversarial Networks (GANs). We then measure how these additional synthetic data affect supervised machine learning performance on an object detection task. Our data driven strategy is to train GANs to (1) generate synthetic segmentation masks and (2) generate plausible synthetic remote sensing imagery corresponding to these segmentation masks. Run sequentially, these GANs allow the generation of synthetic remote sensing imagery complete with segmentation labels. We apply this strategy to the data set from ISPRS' 2D Semantic Labeling Contest - Potsdam, with a follow on vehicle detection task. We find that in scenarios with limited training data, augmenting the available data with such synthetically generated data can improve detector performance. △ Less

Submitted 10 August, 2019; originally announced August 2019.

On double-membership graphs of models of Anti-Foundation

Authors: Bea Adam-Day, John Howe, Rosario Mennuni

Abstract: We answer some questions about graphs which are reducts of countable models of Anti-Foundation, obtained by considering the binary relation of double-membership $x\in y\in x$. We show that there are continuum-many such graphs, and study their connected components. We describe their complete theories and prove that each has continuum-many countable models, some of which are not reducts of models of… ▽ More We answer some questions about graphs which are reducts of countable models of Anti-Foundation, obtained by considering the binary relation of double-membership $x\in y\in x$. We show that there are continuum-many such graphs, and study their connected components. We describe their complete theories and prove that each has continuum-many countable models, some of which are not reducts of models of Anti-Foundation. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: 15 pages, 2 figures

MSC Class: 03C62 (Primary) 03C13; 03E30; 03E65 (Secondary)

Efficient predicate invention using shared "NeMuS"

Authors: Edjard Mota, Jacob M. Howe, Ana Schramm, Artur d'Avila Garcez

Abstract: Amao is a cognitive agent framework that tackles the invention of predicates with a different strategy as compared to recent advances in Inductive Logic Programming (ILP) approaches like Meta-Intepretive Learning (MIL) technique. It uses a Neural Multi-Space (NeMuS) graph structure to anti-unify atoms from the Herbrand base, which passes in the inductive momentum check. Inductive Clause Learning (… ▽ More Amao is a cognitive agent framework that tackles the invention of predicates with a different strategy as compared to recent advances in Inductive Logic Programming (ILP) approaches like Meta-Intepretive Learning (MIL) technique. It uses a Neural Multi-Space (NeMuS) graph structure to anti-unify atoms from the Herbrand base, which passes in the inductive momentum check. Inductive Clause Learning (ICL), as it is called, is extended here by using the weights of logical components, already present in NeMuS, to support inductive learning by expanding clause candidates with anti-unified atoms. An efficient invention mechanism is achieved, including the learning of recursive hypotheses, while restricting the shape of the hypothesis by adding bias definitions or idiosyncrasies of the language. △ Less

Submitted 14 June, 2019; originally announced June 2019.

Comments: 7 pages, 5 figures, Proceedings of the 2019 International Workshop on Neural-Symbolic Learning and Reasoning

ACM Class: I.2.0; I.2.1; I.2.3; I.2.4; I.2.8; I.2.11

Legal Area Classification: A Comparative Study of Text Classifiers on Singapore Supreme Court Judgments

Authors: Jerrold Soh Tsin Howe, Lim How Khang, Ian Ernst Chai

Abstract: This paper conducts a comparative study on the performance of various machine learning (``ML'') approaches for classifying judgments into legal areas. Using a novel dataset of 6,227 Singapore Supreme Court judgments, we investigate how state-of-the-art NLP methods compare against traditional statistical models when applied to a legal corpus that comprised few but lengthy documents. All approaches… ▽ More This paper conducts a comparative study on the performance of various machine learning (``ML'') approaches for classifying judgments into legal areas. Using a novel dataset of 6,227 Singapore Supreme Court judgments, we investigate how state-of-the-art NLP methods compare against traditional statistical models when applied to a legal corpus that comprised few but lengthy documents. All approaches tested, including topic model, word embedding, and language model-based classifiers, performed well with as little as a few hundred judgments. However, more work needs to be done to optimize state-of-the-art methods for the legal domain. △ Less

Submitted 12 April, 2019; originally announced April 2019.

Comments: Accepted to the 1st Workshop on Natural Legal Language Processing (co-located with NAACL2019)

Identifying the Structural Basis for the Increased Stability of the Solid Electrolyte Interphase Formed on Silicon with the Additive Fluoroethylene Carbonate

Authors: Yanting Jin, Nis-Julian H. Kneusels, Pieter C. M. M. Magusin, Gunwoo Kim, Elizabeth Castillo-Martinez, Lauren E. Marbella, Rachel N. Kerber, Duncan J. Howe, Subhradip Paul, Tao Liu, Clare P. Grey

Abstract: To elucidate the role of fluoroethylene carbonate (FEC) as an additive in the standard carbonate-based electrolyte for Li-ion batteries, the solid electrolyte interphase (SEI) formed during electrochemical cycling on silicon anodes was analyzed with a combination of solution and solid-state NMR techniques, including dynamic nuclear polarization. To facilitate characterization via 1D and 2D NMR, we… ▽ More To elucidate the role of fluoroethylene carbonate (FEC) as an additive in the standard carbonate-based electrolyte for Li-ion batteries, the solid electrolyte interphase (SEI) formed during electrochemical cycling on silicon anodes was analyzed with a combination of solution and solid-state NMR techniques, including dynamic nuclear polarization. To facilitate characterization via 1D and 2D NMR, we synthesized 13C-enriched FEC, ultimately allowing a detailed structural assignment of the organic SEI. We find that the soluble PEO-like line- ar oligomeric electrolyte breakdown products that are observed after cycling in the standard ethylene carbonate (EC)-based electrolyte are suppressed in the presence of 10 vol % FEC additive. FEC is first defluorinated to form soluble vinylene carbonate and vinoxyl species, which react to form both soluble and insoluble branched ethylene-oxide based polymers. No evidence for branched polymers are observed in the absence of FEC. △ Less

Submitted 8 May, 2018; originally announced May 2018.

Porous translucent electrodes enhance current generation from photosynthetic biofilms

Authors: Tobias Wenzel, Daniel Haertter, Paolo Bombelli, Christopher J. Howe, Ullrich Steiner

Abstract: We tested the enhancement of electrical current generated from photosynthetically active bacteria by use of electrodes with porosity on the nano- and micrometer length-scale. For two cyanobacteria on structured indium-tin-oxide electrodes, current generation was increased by two orders of magnitude and the photo-response was substantially faster compared to non-porous anodes. These properties high… ▽ More We tested the enhancement of electrical current generated from photosynthetically active bacteria by use of electrodes with porosity on the nano- and micrometer length-scale. For two cyanobacteria on structured indium-tin-oxide electrodes, current generation was increased by two orders of magnitude and the photo-response was substantially faster compared to non-porous anodes. These properties highlight porosity as an important design strategy for electrochemical bio-interfaces. The role of porosity on different length scales was studied systematically which revealed that the main performance enhancement was caused by the increased surface area of the electrodes. More complex microstructured architectures which spanned biofilms as translucent 3D scaffolds provided additional advantage in the presence of microbial direct electron transfer (DET). The absence of a clear DET contribution in both studied cyanobacteria, Synechocystis and Nostoc, raises questions about the role of conductive cellular components previously found in both organisms. △ Less

Submitted 25 December, 2017; originally announced December 2017.

Comments: 11 pages manuscript and 6 pages supplementary material, 18 figures overall

Demonstration of input-to-output gain and temporal noise mitigation in a Talbot amplifier

Authors: Reza Maram, Mohamed Seghilani, Jinwoo Jeon, Xiao-Zhou Li, Luis Romero Cortes, James van Howe, Jose Azana

Abstract: We experimentally demonstrate intensity amplification of repetitive picosecond optical pulses with an input-to-output gain up to 5.5 dB using a passive Talbot amplifier. Through the dispersion-induced temporal Talbot effect, the amplifier uses electro-optic phase modulation and a low-loss dispersive medium to exploit and coherently redistribute the energy of the original pulse train into fewer, re… ▽ More We experimentally demonstrate intensity amplification of repetitive picosecond optical pulses with an input-to-output gain up to 5.5 dB using a passive Talbot amplifier. Through the dispersion-induced temporal Talbot effect, the amplifier uses electro-optic phase modulation and a low-loss dispersive medium to exploit and coherently redistribute the energy of the original pulse train into fewer, replica, amplified pulses. In addition, we show how our passive amplifier mitigates the pulse train timing-jitter and pulse-to-pulse intensity fluctuations above a specific cutoff frequency. △ Less

Submitted 29 September, 2017; originally announced October 2017.

Comments: 4 pages, 5 figures

Improved Clustering with Augmented k-means

Authors: J. Andrew Howe

Abstract: Identifying a set of homogeneous clusters in a heterogeneous dataset is one of the most important classes of problems in statistical modeling. In the realm of unsupervised partitional clustering, k-means is a very important algorithm for this. In this technical report, we develop a new k-means variant called Augmented k-means, which is a hybrid of k-means and logistic regression. During each itera… ▽ More Identifying a set of homogeneous clusters in a heterogeneous dataset is one of the most important classes of problems in statistical modeling. In the realm of unsupervised partitional clustering, k-means is a very important algorithm for this. In this technical report, we develop a new k-means variant called Augmented k-means, which is a hybrid of k-means and logistic regression. During each iteration, logistic regression is used to predict the current cluster labels, and the cluster belonging probabilities are used to control the subsequent re-estimation of cluster means. Observations which can't be firmly identified into clusters are excluded from the re-estimation step. This can be valuable when the data exhibit many characteristics of real datasets such as heterogeneity, non-sphericity, substantial overlap, and high scatter. Augmented k-means frequently outperforms k-means by more accurately classifying observations into known clusters and / or converging in fewer iterations. We demonstrate this on both simulated and real datasets. Our algorithm is implemented in Python and will be available with this report. △ Less

Submitted 22 May, 2017; originally announced May 2017.

MSC Class: 62H30 ACM Class: I.5.3; G.3; G.4

A High Power-Density Mediator-Free Microfluidic Biophotovoltaic Device for Cyanobacterial Cells

Authors: Paolo Bombelli, Thomas Müller, Therese W. Herling, Christopher J. Howe, Tuomas P. J. Knowles

Abstract: Biophotovoltaics has emerged as a promising technology for generating renewable energy since it relies on living organisms as inexpensive, self-repairing and readily available catalysts to produce electricity from an abundant resource - sunlight. The efficiency of biophotovoltaic cells, however, has remained significantly lower than that achievable through synthetic materials. Here, we devise a pl… ▽ More Biophotovoltaics has emerged as a promising technology for generating renewable energy since it relies on living organisms as inexpensive, self-repairing and readily available catalysts to produce electricity from an abundant resource - sunlight. The efficiency of biophotovoltaic cells, however, has remained significantly lower than that achievable through synthetic materials. Here, we devise a platform to harness the large power densities afforded by miniaturised geometries. To this effect, we have developed a soft-lithography approach for the fabrication of microfluidic biophotovoltaic devices that do not require membranes or mediators. Synechocystis sp. PCC 6803 cells were injected and allowed to settle on the anode, permitting the physical proximity between cells and electrode required for mediator-free operation. We demonstrate power densities of above 100 mW/m2 for a chlorophyll concentration of 100 μM under white light, a high value for biophotovoltaic devices without extrinsic supply of additional energy. △ Less

Submitted 21 November, 2014; originally announced November 2014.

Comments: 9 pages, 7 figures, including supporting material. appears in Advanced Energy Materials, in print, 2014

Passive, Noiseless, Intensity Amplification of Repetitive Signals

Authors: R. Maram, J. van Howe, M. Li, J. Azaña

Abstract: Amplification of signal intensity is essential for initiating physical processes, diagnostics, sensing, communications, and scientific measurement. During traditional amplification, the signal is amplified by multiplying the signal carriers through an active gain process using an external power source. However, for repetitive waveforms, sufficient energy for amplification often resides in the sign… ▽ More Amplification of signal intensity is essential for initiating physical processes, diagnostics, sensing, communications, and scientific measurement. During traditional amplification, the signal is amplified by multiplying the signal carriers through an active gain process using an external power source. However, for repetitive waveforms, sufficient energy for amplification often resides in the signal itself. In such cases, the unneeded external power is wasted, and the signal is additionally degraded by noise and distortions that accompany active gain processes. We show noiseless, intensity amplification of repetitive optical pulse waveforms with a gain from 2 to ~20 without using active gain, by recycling energy already stored in the input repetitive signal. This "green" method uses dispersion-induced self-imaging (Talbot) effects to precisely re-distribute the original signal energy into fewer replica waveforms. This approach simply requires a suitable manipulation of the input signal's phase profile along the temporal and spectral domains. In addition, we show experimentally how our passive amplifier performs a real-time average of the wave train to reduce noise fluctuation present on the input pulse train, as well as enhances the extinction ratio of pulses to stand above the noise floor by approximately the passive gain factor. Finally, our technique is applicable to repetitive waveforms in any spectral region or wave system, including acoustic, mechanical, and quantum probability waveforms, for which active amplification methods are challenging to implement or nonexistent. △ Less

Submitted 11 July, 2014; originally announced July 2014.

Comments: 24 pages, 9 figures

Probing Local Variations of Superconductivity on the Surface of Ba(Fe1-xCox)2As2 Single Crystals

Authors: T. -H. Kim, R. Jin, L. R. Walker, J. Y. Howe, M. H. Pan, J. F. Wendelken, J. R. Thompson, A. S. Sefat, M. A. McGuire, B. C. Sales, D. Mandrus, A. P. Li

Abstract: The spatially resolved electrical transport properties have been studied on the surface of optimally-doped superconducting Ba(Fe1-xCox)2As2 single crystal by using a four-probe scanning tunneling microscopy. While some non-uniform contrast appears near the edge of the cleaved crystal, the scanning electron microscopy (SEM) reveals mostly uniform contrast. For the regions that showed uniform SEM… ▽ More The spatially resolved electrical transport properties have been studied on the surface of optimally-doped superconducting Ba(Fe1-xCox)2As2 single crystal by using a four-probe scanning tunneling microscopy. While some non-uniform contrast appears near the edge of the cleaved crystal, the scanning electron microscopy (SEM) reveals mostly uniform contrast. For the regions that showed uniform SEM contrast, a sharp superconducting transition at TC = 22.1 K has been observed with a transition width (delta)Tc = 0.2 K. In the non-uniform contrast region, TC is found to vary between 19.6 and 22.2 K with (delta)Tc from 0.3 to 3.2 K. The wavelength dispersive x-ray spectroscopy reveals that Co concentration remains 7.72% in the uniform region, but changes between 7.38% and 7.62% in the non-uniform region. Thus the variations of superconductivity are associated with local compositional change. △ Less

Submitted 1 March, 2010; originally announced March 2010.

Comments: 18 pages, 5 figures

Journal ref: Phys. Rev. B 80, 214518 (2009)

Electron Correlations in the Low Carrier Density LaFeAsO0.89F0.11 Superconductor (Tc = 28 K)

Authors: Athena S. Sefat, Michael A. McGuire, Brian C. Sales, Rongying Jin, Jane Y. Howe, David Mandrus

Abstract: The crystal structure and numerous normal and superconducting state properties of layered tetragonal (P4/nmm) LaFeAsO, with F-doping of 11 %, are reported. Resistivity measurements give an onset transition temperature Tc = 28.2 K, and low field magnetic susceptibility data indicate bulk superconductivity. In applied magnetic field, analysis of the resistive transition results in a critical field… ▽ More The crystal structure and numerous normal and superconducting state properties of layered tetragonal (P4/nmm) LaFeAsO, with F-doping of 11 %, are reported. Resistivity measurements give an onset transition temperature Tc = 28.2 K, and low field magnetic susceptibility data indicate bulk superconductivity. In applied magnetic field, analysis of the resistive transition results in a critical field Hc2 = 30 T and a coherence length 35 A. An upper limit for the electron carrier concentration of 1 x 10^21 cm-3 is inferred from Hall data just above Tc. Strong electron-electron correlations are suggested from temperature-dependent resistivity, Seebeck coefficient, and thermal conductivity data. Anomalies near Tc are observed in both Seebeck coefficient and thermal conductivity data. △ Less

Submitted 17 March, 2008; originally announced March 2008.

Comments: 13 pages, 8 figures

Journal ref: Physical Review B 77 (2008), 174503

Worst-Case Groundness Analysis Using Definite Boolean Functions

Authors: Samir Genaim, Michael Codish, Jacob M. Howe

Abstract: This note illustrates theoretical worst-case scenarios for groundness analyses obtained through abstract interpretation over the abstract domains of definite (Def) and positive (Pos) Boolean functions. For Def, an example is given for which any Def-based abstract interpretation for groundness analysis follows a chain which is exponential in the number of argument positions as well as in the numb… ▽ More This note illustrates theoretical worst-case scenarios for groundness analyses obtained through abstract interpretation over the abstract domains of definite (Def) and positive (Pos) Boolean functions. For Def, an example is given for which any Def-based abstract interpretation for groundness analysis follows a chain which is exponential in the number of argument positions as well as in the number of clauses but sub-exponential in the size of the program. For Pos, we strengthen a previous result by illustrating an example for which any Pos-based abstract interpretation for groundness analysis follows a chain which is exponential in the size of the program. It remains an open problem to determine if the worst case for Def is really as bad as that for Pos. △ Less

Submitted 26 May, 2004; originally announced May 2004.

Comments: Appeared in Theory and Practice of Logic Programming, vol. 1, no. 5, 2001

ACM Class: D.1.6; D.3.2

Journal ref: Theory and Practice of Logic Programming, vol. 1, no. 5, 2001

Water Absorption From Line-of-Sight Clouds Toward W49A

Authors: Rene Plume, Michael J. Kaufman, David A. Neufeld, Ronald L. Snell, David J. Hollenbach, Paul F. Goldsmith, John Howe, Edwin A. Bergin, Gary J. Melnick, Frank Bensch

Abstract: We have observed 6 clouds along the line-of-sight toward W49A using the Submillimeter Wave Astronomy Satellite (SWAS) and several ground-based observatories. The ortho-H2O 1-0 and OH (1665 and 1667 MHz) transitions are observed in absorption, whereas the low-J CO, 13CO, and C18O lines, as well as the [CI] 1-0 transition, are seen in emission. By using both the o-H218O and o-H2O absorption lines,… ▽ More We have observed 6 clouds along the line-of-sight toward W49A using the Submillimeter Wave Astronomy Satellite (SWAS) and several ground-based observatories. The ortho-H2O 1-0 and OH (1665 and 1667 MHz) transitions are observed in absorption, whereas the low-J CO, 13CO, and C18O lines, as well as the [CI] 1-0 transition, are seen in emission. By using both the o-H218O and o-H2O absorption lines, we are able to constrain the column-averaged o-H_2O abundances in each line-of-sight cloud to within about an order of magnitude. Assuming the standard N(H2)/N(CO) ratio of 10^4, we find N(o-H2O)/N(H2) = 8.1 x 10^-8 - 4 x 10^-7 for three clouds with optically thin water lines. In three additional clouds, the H$_2$O lines are saturated so we have used observations of the H218O ground-state transition to find upper limits to the water abundance of 8.2x 10^-8 - 1.5x10^-6. We measure the OH abundance from the average of the 1665 and 1667 MHz observations and find N(OH)/N(H2) = 2.3x10^-7 - 1.1x10^-6. The o-H2O and OH abundances are similar to those determined for line-of-sight water absorption features towards W51 and Sgr B2 but are higher than those seen from water emission lines in molecular clouds. However, the clouds towards W49 have lower ratios of OH relative to H2O column densities than are predicted by simple models which assume that dissociative recombination is the primary formation pathway for OH and H2O. Building on the work of Neufeld et al. (2002), we present photo-chemistry models including additional chemical effects, which can also explain the observed OH and H2O column densities as well as the observed H2O/CO abundance ratios. △ Less

Submitted 22 January, 2004; originally announced January 2004.

Comments: 32 pages, 7 figures, To appear in ApJ April 10 issue

Journal ref: Astrophys.J. 605 (2004) 247-258

A Survey of 557 GHz Water Vapor Emission in the NGC 1333 Molecular Cloud

Authors: Edwin A. Bergin, Michael J. Kaufman, Gary J. Melnick, Ronald L. Snell, John E. Howe

Abstract: Using NASA's Submillimeter Wave Astronomy Satellite (SWAS) we have examined the production of water in quiescent and shocked molecular gas through a survey of the 556.936 GHz transition of ortho-H2O in the NGC 1333 molecular core. These observations reveal broad emission lines associated with the IRAS~2, IRAS~4, IRAS~7, and HH7-11 outflows. Towards 3 positions we detect narrow (~2-3 km/s) emissi… ▽ More Using NASA's Submillimeter Wave Astronomy Satellite (SWAS) we have examined the production of water in quiescent and shocked molecular gas through a survey of the 556.936 GHz transition of ortho-H2O in the NGC 1333 molecular core. These observations reveal broad emission lines associated with the IRAS~2, IRAS~4, IRAS~7, and HH7-11 outflows. Towards 3 positions we detect narrow (~2-3 km/s) emission lines clearly associated with the ambient gas. The SWAS observations, with a resolution of 4', are supplemented with observations from the Infrared Space Observatory (ISO) and by an unbiased survey of a 17' x 15' area, with 50" resolution, in the low-J transitions of CO, 13CO, C18O, N2H+, CH3OH, and SiO. Using these combined data sets, with consistent assumptions, we find beam-averaged o-H2O abundances of > 10^{-6} relative to H2O for all four outflows. A comparison of SWAS and ISO water data is consistent with non-dissociative shock models, provided the majority of the 557 GHz emission arises from cool post-shock material with enhanced abundances. In the ambient gas the o-H2O abundance is found to lie between 0.1-1 x 10^{-7} relative to H2 and is enhanced when compared to cold pre-stellar molecular cores. A comparison of the water emission with tracers of dense condensations and shock chemistry finds no clear correlation. However, the water emission appears to be associated with the presence of luminous external heating sources which power the reflection nebula and the photodissociation (PDR) region. Simple PDR models are capable of reproducing the water and high-J 13CO emission, suggesting that a PDR may account for the excitation of water in low density undepleted gas as suggested by Spaans & van Dishoeck (2001). △ Less

Submitted 9 September, 2002; originally announced September 2002.

Comments: 36 pages, 8 figures (2 color), accepted by ApJ

Journal ref: Astrophys.J. 582 (2003) 830-845

Three Optimisations for Sharing

Authors: Jacob M. Howe, Andy King

Abstract: In order to improve precision and efficiency sharing analysis should track both freeness and linearity. The abstract unification algorithms for these combined domains are suboptimal, hence there is scope for improving precision. This paper proposes three optimisations for tracing sharing in combination with freeness and linearity. A novel connection between equations and sharing abstractions is… ▽ More In order to improve precision and efficiency sharing analysis should track both freeness and linearity. The abstract unification algorithms for these combined domains are suboptimal, hence there is scope for improving precision. This paper proposes three optimisations for tracing sharing in combination with freeness and linearity. A novel connection between equations and sharing abstractions is used to establish correctness of these optimisations even in the presence of rational trees. A method for pruning intermediate sharing abstractions to improve efficiency is also proposed. The optimisations are lightweight and therefore some, if not all, of these optimisations will be of interest to the implementor. △ Less

Submitted 18 March, 2002; originally announced March 2002.

Comments: To appear in Theiry and Practice of Logic Programming

ACM Class: D.1.6; f.3.2

Efficient Groundness Analysis in Prolog

Authors: Jacob M. Howe, Andy King

Abstract: Boolean functions can be used to express the groundness of, and trace grounding dependencies between, program variables in (constraint) logic programs. In this paper, a variety of issues pertaining to the efficient Prolog implementation of groundness analysis are investigated, focusing on the domain of definite Boolean functions, Def. The systematic design of the representation of an abstract do… ▽ More Boolean functions can be used to express the groundness of, and trace grounding dependencies between, program variables in (constraint) logic programs. In this paper, a variety of issues pertaining to the efficient Prolog implementation of groundness analysis are investigated, focusing on the domain of definite Boolean functions, Def. The systematic design of the representation of an abstract domain is discussed in relation to its impact on the algorithmic complexity of the domain operations; the most frequently called operations should be the most lightweight. This methodology is applied to Def, resulting in a new representation, together with new algorithms for its domain operations utilising previously unexploited properties of Def -- for instance, quadratic-time entailment checking. The iteration strategy driving the analysis is also discussed and a simple, but very effective, optimisation of induced magic is described. The analysis can be implemented straightforwardly in Prolog and the use of a non-ground representation results in an efficient, scalable tool which does not require widening to be invoked, even on the largest benchmarks. An extensive experimental evaluation is given △ Less

Submitted 16 January, 2002; originally announced January 2002.

Comments: 31 pages To appear in Theory and Practice of Logic Programming

ACM Class: D.1.6; F.3.2

Extended [C I] and ^{13}CO(5-4) Emission in M17SW

Authors: J. E. Howe, M. L. N. Ashby, E. A. Bergin, G. Chin, N. R. Erickson, P. F. Goldsmith, M. Harwit, D. J. Hollenbach, M. J. Kaufman, S. C. Kleiner, D. G. Koch, D. A. Neufeld, B. M. Patten, R. Plume, R. Schieder, R. L. Snell, J. R. Stauffer, V. Tolls, Z. Wang, G. Winnewisser, Y. F. Zhang, G. J. Melnick

Abstract: We mapped a 13 by 22 pc region in emission from 492 GHz [C I] and, for the first time, 551 GHz ^{13}CO(5-4) in the giant molecular cloud M17SW, using the Submillimeter Wave Astronomy Satellite. The morphologies of the [C I] and ^{13}CO emission are strikingly similar. The extent and intensity of the [C I] and ^{13}CO(5-4) emission is explained as arising from photodissociation regions on the sur… ▽ More We mapped a 13 by 22 pc region in emission from 492 GHz [C I] and, for the first time, 551 GHz ^{13}CO(5-4) in the giant molecular cloud M17SW, using the Submillimeter Wave Astronomy Satellite. The morphologies of the [C I] and ^{13}CO emission are strikingly similar. The extent and intensity of the [C I] and ^{13}CO(5-4) emission is explained as arising from photodissociation regions on the surfaces of embedded molecular clumps. Modeling of the ^{13}CO(5-4) emission in comparison to ^{13}CO(1-0) indicates a temperature gradient across the cloud, peaking to at least 63 K near the M17 ionization front and decreasing to at least 20 K at the western edge of the cloud. We see no correlation between gas density and column density. The beam-averaged column density of C I in the core is 1x10^{18} cm^-2, and the mean column density ratio N(C I)/N(CO) is about 0.4. The variations of N(C I)/N(CO) with position in M17SW indicate a similar clump size distribution throughout the cloud. △ Less

Submitted 19 October, 2000; originally announced October 2000.

Comments: 5 pages, 3 Postscript figures, uses aastex.cls, emulateapj5.sty (included), and apjfonts.sty (included)

Journal ref: ApJ (Letters), 539, L137 (2000)

Water Abundance in Molecular Cloud Cores

Authors: R. L. Snell, J. E. Howe, M. L. N. Ashby, E. A. Bergin, G. Chin, N. R. Erickson, P. F. Goldsmith, M. Harwit, S. C. Kleiner, D. G. Koch, D. A. Neufeld, B. M. Patten, R. Plume, R. Schieder, J. R. Stauffer, V. Tolls, Z. Wang, G. Winnewisser, Y. F. Zhang, G. J. Melnick

Abstract: We present Submillimeter Wave Astronomy Satellite (SWAS) observations of the 1_{10}-1_{01} transition of ortho-water at 557 GHz toward 12 molecular cloud cores. The water emission was detected in NGC 7538, Rho Oph A, NGC 2024, CRL 2591, W3, W3(OH), Mon R2, and W33, and was not detected in TMC-1, L134N, and B335. We also present a small map of the water emission in S140. Observations of the H_2^{… ▽ More We present Submillimeter Wave Astronomy Satellite (SWAS) observations of the 1_{10}-1_{01} transition of ortho-water at 557 GHz toward 12 molecular cloud cores. The water emission was detected in NGC 7538, Rho Oph A, NGC 2024, CRL 2591, W3, W3(OH), Mon R2, and W33, and was not detected in TMC-1, L134N, and B335. We also present a small map of the water emission in S140. Observations of the H_2^{18}O line were obtained toward S140 and NGC 7538, but no emission was detected. The abundance of ortho-water relative to H_2 in the giant molecular cloud cores was found to vary between 6x10^{-10} and 1x10^{-8}. Five of the cloud cores in our sample have previous water detections; however, in all cases the emission is thought to arise from hot cores with small angular extents. The water abundance estimated for the hot core gas is at least 100 times larger than in the gas probed by SWAS. The most stringent upper limit on the ortho-water abundance in dark clouds is provided in TMC-1, where the 3-sigma upper limit on the ortho-water fractional abundance is 7x10^{-8}. △ Less

Submitted 19 October, 2000; originally announced October 2000.

Comments: 5 pages, 3 Postscript figures, uses aastex.cls, emulateapj5.sty (included), and apjfonts.sty (included)

Journal ref: ApJ (Letters), 539, L101 (2000)

The Distribution of Water Emission in M17SW

Authors: R. L. Snell, J. E. Howe, M. L. N. Ashby, E. A. Bergin, G. Chin, N. R. Erickson, P. F. Goldsmith, M. Harwit, S. C. Kleiner, D. G. Koch, D. A. Neufeld, B. M. Patten, R. Plume, R. Schieder, J. R. Stauffer, V. Tolls, Z. Wang, G. Winnewisser, Y. F. Zhang, G. J. Melnick

Abstract: We present a 17-point map of the M17SW cloud core in the 1_{10}-1_{01} transition of ortho-water at 557 GHz obtained with the Submillimeter Wave Astronomy Satellite. Water emission was detected in 11 of the 17 observed positions. The line widths of the water emission vary between 4 and 9 km s^{-1}, and are similar to other emission lines that arise in the M17SW core. A direct comparison is made… ▽ More We present a 17-point map of the M17SW cloud core in the 1_{10}-1_{01} transition of ortho-water at 557 GHz obtained with the Submillimeter Wave Astronomy Satellite. Water emission was detected in 11 of the 17 observed positions. The line widths of the water emission vary between 4 and 9 km s^{-1}, and are similar to other emission lines that arise in the M17SW core. A direct comparison is made between the spatial extent of the water emission and the ^{13}CO J = 5\to4 emission; the good agreement suggests that the water emission arises in the same warm, dense gas as the ^{13}CO emission. A spectrum of the H_2^{18}O line was also obtained at the center position of the cloud core, but no emission was detected. We estimate that the average abundance of ortho-water relative to H_2 within the M17 dense core is approximately 1x10^{-9}, 30 times smaller than the average for the Orion core. Toward the H II region/molecular cloud interface in M17SW the ortho-water abundance may be about 5 times larger than in the dense core. △ Less

Submitted 19 October, 2000; originally announced October 2000.

Comments: 4 pages, 3 Postscript figures, uses aastex.cls, emulateapj5.sty (included), and apjfonts.sty (included)

Journal ref: ApJ (Letters), 539, L97 (2000)

Submillimeter Wave Astronomy Satellite Observations of Extended Water Emission in Orion

Authors: R. L. Snell, J. E. Howe, M. L. N. Ashby, E. A. Bergin, G. Chin, N. R. Erickson, P. F. Goldsmith, M. Harwit, S. C. Kleiner, D. G. Koch, D. A. Neufeld, B. M. Patten, R. Plume, R. Schieder, J. R. Stauffer, V. Tolls, Z. Wang, G. Winnewisser, Y. F. Zhang, G. J. Melnick

Abstract: We have used the Submillimeter Wave Astronomy Satellite to map the ground-state 1_{10}-1_{01} transition of ortho-water at 557 GHz in the Orion molecular cloud. Water emission was detected in Orion over an angular extent of about 20 arcmin, or nearly 3 pc. The water emission is relatively weak, with line widths (3-6 km s^{-1}) and V_{LSR} velocities (9-11 km s^{-1}) consistent with an origin in… ▽ More We have used the Submillimeter Wave Astronomy Satellite to map the ground-state 1_{10}-1_{01} transition of ortho-water at 557 GHz in the Orion molecular cloud. Water emission was detected in Orion over an angular extent of about 20 arcmin, or nearly 3 pc. The water emission is relatively weak, with line widths (3-6 km s^{-1}) and V_{LSR} velocities (9-11 km s^{-1}) consistent with an origin in the cold gas of the molecular ridge. We find that the ortho-water abundance relative to H_2 in the extended gas in Orion varies between 1 and 8x10^{-8}, with an average of 3x10^{-8}. The absence of detectable narrow-line ortho-H_2^{18}O emission is used to set a 3-sigma upper limit on the relative ortho-water abundance of 7x10^{-8}. △ Less

Submitted 19 October, 2000; originally announced October 2000.

Comments: 4 pages, 2 Postscript figures, uses aastex.cls, emulateapj5.sty (included), and apjfonts.sty (included)

Journal ref: ApJ (Letters), 539, L93 (2000)

The Large-scale J=3-2 and J=2-1 CO Emission from M17 and its Implications for Extragalactic CO Observations

Authors: C. D. Wilson, J. E. Howe, M. L. Balogh

Abstract: We observed a 10x20 pc region of the molecular cloud M17 in the 12CO and 13CO J=3-2 and J=2-1 transitions to determine their global behavior and to assess the reliability of using ratios of CO line intensities integrated over an entire cloud to determine the physical conditions within the cloud. Both the 12CO/13CO J=2-1 and J=3-2 line ratios correlate with the 13CO integrated intensity, with sma… ▽ More We observed a 10x20 pc region of the molecular cloud M17 in the 12CO and 13CO J=3-2 and J=2-1 transitions to determine their global behavior and to assess the reliability of using ratios of CO line intensities integrated over an entire cloud to determine the physical conditions within the cloud. Both the 12CO/13CO J=2-1 and J=3-2 line ratios correlate with the 13CO integrated intensity, with smaller line ratios observed at locations with large integrated intensities. This correlation is likely due to variations in the column density from one position to another within M17. The 12CO and 13CO (J=3-2/J=2-1) line ratios show no significant variation from place to place within M17, even on the peak of the photon-dominated region. A Large Velocity Gradient analysis of globally averaged line ratios gives results in reasonable agreement with the results obtained for individual lines-of-sight through the cloud, which suggests that the typical physical conditions in a molecular cloud can be determined using CO line ratios integrated over the entire cloud. There appears to be a clear trend of increasing 12CO/13CO J=2-1 and J=3-2 line ratios as one moves from Galactic molecular cloud cores to entire Galactic molecular clouds to normal galaxies. The most likely explanation of the high line ratios for normal galaxies is a significant contribution to the CO emission by low column density material, such as diffuse molecular clouds or the outer envelopes of giant molecular clouds. △ Less

Submitted 11 January, 1999; originally announced January 1999.

Comments: 26 pages, 6 figures, 2 tables. Accepted for publication in ApJ

Extended Co(7-6) Emission from Warm Gas in Orion

Authors: J. E. Howe, D. T. Jaffe, E. N. Grossman, W. F. Wall, J. G. Mangum, G. J. Stacey

Abstract: We mapped quiescent 807 GHz CO(7-6) emission from Orion along a strip in RA extending from 0.7 pc west to 1.2 pc east of Ori theta 1C. The lines arise in warm gas with T > 40 K. The line brightness temperature is > 160 K in the di- rection of theta 1C, more than twice the dust temperature, and still exceeds 35 K more than a parsec east of theta 1C. The lines are narrow, with a max- imum velocity… ▽ More We mapped quiescent 807 GHz CO(7-6) emission from Orion along a strip in RA extending from 0.7 pc west to 1.2 pc east of Ori theta 1C. The lines arise in warm gas with T > 40 K. The line brightness temperature is > 160 K in the di- rection of theta 1C, more than twice the dust temperature, and still exceeds 35 K more than a parsec east of theta 1C. The lines are narrow, with a max- imum velocity width of 7 km s^-1 near theta 1C and decreasing to 1.5-3 km s^-1 at the map boundaries. The density of the emitting gas is > 10^4 cm^-3 and the column density exceeds 10^21 cm^-2. The correlation of the bright, narrow CO(7-6) lines with 158 micron [C II] emission suggests that over the entire region mapped, the narrow CO lines arise in warm photo-dissociation regions ex- cited by UV photons from the Trapezium cluster. Although the Trapezium stars lie in front of the Orion A molecular cloud, not all of the warm gas is at the cloud surface. To the east of theta 1C the CO(7-6) lines split into two velo- city components (also seen in 13CO(2-1) emission) which persist over several arcminutes. Since only one of these components can be on the surface, the other must arise from a dense, UV-illuminated clump or filament within the molecular cloud. Comparison of the quiescent CO(7-6) emission to CO(7-6) ob- served in a cross-map of the energetic Orion KL outflow shows that the lumino- sity of shock-excited CO(7-6) emission in Orion is only a few percent of the luminosity of the widespread quiescent CO(7-6) emission. △ Less

Submitted 18 January, 1993; originally announced January 1993.

Comments: 15 pp., Plain TeX, 5 Post- script figures in UNIX compressed format avail. until 5feb93 via anonymous ftp from astro.umd.edu, directory pub/jhowe, or by request. UT-ASTRO-211

Journal ref: Astrophys.J. 410 (1993) 179-187