-
The Heisenberg-RIXS instrument at the European XFEL
Authors:
Justine Schlappa,
Giacomo Ghiringhelli,
Benjamin E. Van Kuiken,
Martin Teichmann,
Piter S. Miedema,
Jan Torben Delitz,
Natalia Gerasimova,
Serguei Molodtsov,
Luigi Adriano,
Bernard Baranasic,
Carsten Broers,
Robert Carley,
Patrick Gessler,
Nahid Ghodrati,
David Hickin,
Le Phuong Hoang,
Manuel Izquierdo,
Laurent Mercadier,
Giuseppe Mercurio,
Sergii Parchenko,
Marijan Stupar,
Zhong Yin,
Leonardo Martinelli,
Giacomo Merzoni,
Ying Ying Peng
, et al. (22 additional authors not shown)
Abstract:
Resonant Inelastic X-ray Scattering (RIXS) is an ideal X-ray spectroscopy method to push the combination of energy and time resolutions to the Fourier transform ultimate limit, because it is unaffected by the core-hole lifetime energy broadening. And in pump-probe experiments the interaction time is made very short by the same core-hole lifetime. RIXS is very photon hungry so it takes great advant…
▽ More
Resonant Inelastic X-ray Scattering (RIXS) is an ideal X-ray spectroscopy method to push the combination of energy and time resolutions to the Fourier transform ultimate limit, because it is unaffected by the core-hole lifetime energy broadening. And in pump-probe experiments the interaction time is made very short by the same core-hole lifetime. RIXS is very photon hungry so it takes great advantage from high repetition rate pulsed X-ray sources like the European XFEL. The hRIXS instrument is designed for RIXS experiments in the soft X-ray range with energy resolution approaching the Fourier and the Heisenberg limits. It is based on a spherical grating with variable line spacing (VLS) and a position-sensitive 2D detector. Initially, two gratings are installed to adequately cover the whole photon energy range. With optimized spot size on the sample and small pixel detector the energy resolution can be better than 40 meV at any photon energy below 1000 eV. At the SCS instrument of the European XFEL the spectrometer can be easily positioned thanks to air-pads on a high-quality floor, allowing the scattering angle to be continuously adjusted over the 65-145 deg range. It can be coupled to two different sample interaction chamber, one for liquid jets and one for solids, each equipped at the state-of-the-art and compatible for optical laser pumping in collinear geometry. The measured performances, in terms of energy resolution and count rate on the detector, closely match design expectations. hRIXS is open to public users since the summer of 2022.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Inner product regularized multi-energy X-ray tomography for material decomposition
Authors:
Salla-Maaria Latva-Äijö,
Filippo Zanetti,
Ari-Pekka Honkanen,
Simo Huotari,
Jacek Gondzio,
Matti Lassas,
Samuli Siltanen
Abstract:
Multi-energy X-ray tomography is studied for decomposing three materials using three X-ray energies and a classical energy-integrating detector. A novel regularization term comprises inner products between the material distribution functions, penalizing any overlap of different materials. The method is tested on real data measured of a phantom embedded with Na$_2$SeO$_3$, Na$_2$SeO$_4$, and elemen…
▽ More
Multi-energy X-ray tomography is studied for decomposing three materials using three X-ray energies and a classical energy-integrating detector. A novel regularization term comprises inner products between the material distribution functions, penalizing any overlap of different materials. The method is tested on real data measured of a phantom embedded with Na$_2$SeO$_3$, Na$_2$SeO$_4$, and elemental selenium. It is found that the two-dimensional distributions of selenium in different oxidation states can be mapped and distinguished from each other with the new algorithm. The results have applications in material science, chemistry, biology and medicine.
△ Less
Submitted 4 August, 2023;
originally announced September 2023.
-
Paramagnon dispersion and damping in doped Na$_{x}$Ca$_{2-x}$CuO$_2$Cl$_2$
Authors:
Blair W. Lebert,
Benjamin Bacq-Labreuil,
Mark P. M. Dean,
Kari Ruotsalainen,
Alessandro Nicolaou,
Simo Huotari,
Ikuya Yamada,
Hajime Yamamoto,
Masaki Azuma,
Nicholas B. Brookes,
Flora Yakhou,
Hu Miao,
David Santos-Cottin,
Benjamin Lenz,
Silke Biermann,
Matteo d'Astuto
Abstract:
Using Resonant Inelastic X-ray Scattering, we measure the paramagnon dispersion and damping of undoped, antiferromagnetic Ca$_2$CuO$_2$Cl$_2$ as well as doped, superconducting Na$_{x}$Ca$_{2-x}$CuO$_2$Cl$_2$. Our estimation of the spin-exchange parameter and width of the paramagnon peak at the zone boundary $X=(0.5,0)$ confirms that no simple relation can be drawn between these parameters and the…
▽ More
Using Resonant Inelastic X-ray Scattering, we measure the paramagnon dispersion and damping of undoped, antiferromagnetic Ca$_2$CuO$_2$Cl$_2$ as well as doped, superconducting Na$_{x}$Ca$_{2-x}$CuO$_2$Cl$_2$. Our estimation of the spin-exchange parameter and width of the paramagnon peak at the zone boundary $X=(0.5,0)$ confirms that no simple relation can be drawn between these parameters and the critical temperature $T_\mathrm{c}$. Consistently with other cuprate compounds, we show that upon doping there is a slight softening at $(0.25,0)$, but not at the zone boundary $X$. In combination with these measurements we perform calculations of the dynamical spin structure factor of the one-band Hubbard model using cluster dynamical mean-field theory. The calculations are in excellent agreement with the experiment in the undoped case, both in terms of energy position and width. While the increase in width is also captured upon doping, the dynamical spin structure factor shows a sizable softening at $X$, which provides insightful information on the length-scale of the spin fluctuations in doped cuprates.
△ Less
Submitted 5 July, 2023; v1 submitted 7 March, 2023;
originally announced March 2023.
-
Monochromatic computed tomography using laboratory-scale setup: proof-of-concept
Authors:
Ari-Pekka Honkanen,
Simo Huotari
Abstract:
In this article, we demonstrate the viability of highly monochromatic full-field X-ray absorption near edge structure based tomography using a laboratory-scale Johann-type X-ray absorption spectrometer based on a conventional X-ray tube source. In this proof-of-concept, by using a phantom embedded with elemental Se, Na$_2$SeO$_3$, and Na$_2$SeO$_4$, we show that the three-dimensional distributions…
▽ More
In this article, we demonstrate the viability of highly monochromatic full-field X-ray absorption near edge structure based tomography using a laboratory-scale Johann-type X-ray absorption spectrometer based on a conventional X-ray tube source. In this proof-of-concept, by using a phantom embedded with elemental Se, Na$_2$SeO$_3$, and Na$_2$SeO$_4$, we show that the three-dimensional distributions of Se in different oxidation states can be mapped and distinguished from the phantom matrix and each other with absorption edge contrast tomography. The presented method allows for volumetric analyses of chemical speciation in mm-scale samples using low-brilliance X-ray sources, and represents a new analytic tool for materials engineering and research in many fields including biology and chemistry.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
Redox oscillations in 18650-type lithium-ion cell revealed by in operando Compton scattering imaging
Authors:
Kosuke Suzuki,
Shunta Suzuki,
Yuji Otsuka,
Naruki Tsuji,
Kirsi Jalkanen,
Jari Koskinen,
Kazushi Hoshi,
Ari-Pekka Honkanen,
Hasnain Hafiz,
Yoshiharu Sakurai,
Mika Kanninen,
Simo Huotari,
Arun Bansil,
Hiroshi Sakurai,
Bernardo Barbiellini
Abstract:
Compton scattering imaging using high-energy synchrotron x-rays allows the visualization of the spatio-temporal lithiation state in lithium-ion batteries probed in-operando. Here, we apply this imaging technique to the commercial 18650-type cylindrical lithium-ion battery. Our analysis of the lineshapes of the Compton scattering spectra taken from different electrode layers reveals the emergence o…
▽ More
Compton scattering imaging using high-energy synchrotron x-rays allows the visualization of the spatio-temporal lithiation state in lithium-ion batteries probed in-operando. Here, we apply this imaging technique to the commercial 18650-type cylindrical lithium-ion battery. Our analysis of the lineshapes of the Compton scattering spectra taken from different electrode layers reveals the emergence of inhomogeneous lithiation patterns during the charge-discharge cycles. Moreover, these patterns exhibit oscillations in time where the dominant period corresponds to the time scale of the charging curve.
△ Less
Submitted 13 May, 2021;
originally announced May 2021.
-
Towards novel probes for valence charges via X-ray optical wave mixing
Authors:
Christina Boemer,
Dietrich Krebs,
Andrei Benediktovitch,
Emanuele Rossi,
Simo Huotari,
Nina Rohringer
Abstract:
We present a combined theoretical and experimental study of X-ray optical wave mixing. This class of nonlinear phenomena combines the strengths of spectroscopic techniques from the optical domain, with the high-resolution capabilities of X-rays. In particular, the spectroscopic sensitivity of these phenomena can be exploited to selectively probe valence dynamics. Specifically, we focus on the effe…
▽ More
We present a combined theoretical and experimental study of X-ray optical wave mixing. This class of nonlinear phenomena combines the strengths of spectroscopic techniques from the optical domain, with the high-resolution capabilities of X-rays. In particular, the spectroscopic sensitivity of these phenomena can be exploited to selectively probe valence dynamics. Specifically, we focus on the effect of X-ray parametric down-conversion. We present a theoretical description of the process, from which we deduce the observable nonlinear response of valence charges. Subsequently, we simulate scattering patterns for realistic conditions and identify characteristic signatures of the nonlinear conversion. For the observation of this signature, we present a dedicated experimental setup and results of a detailed investigation. However, we do not find evidence of the nonlinear effect. This finding stands in strong contradiction to previous claims of proof-of-principle demonstrations. Nevertheless, we are optimistic to employ related X-ray optical wave mixing processes on the basis of the methods presented here for probing valence dynamics in the future.
△ Less
Submitted 26 March, 2021;
originally announced March 2021.
-
General method to calculate the elastic deformation and X-ray diffraction properties of bent crystal wafers
Authors:
Ari-Pekka Honkanen,
Simo Huotari
Abstract:
Curved single crystals are widely employed in spectrometer designs in the hard X-ray regime. Due to their large solid angle coverage and focusing properties, toroidally bent crystals are extremely useful in applications where the output of photons is low. Spherically bent crystals, a subgroup of toroidally bent crystals, particularly have found their way in many instruments at synchtrotrons and fr…
▽ More
Curved single crystals are widely employed in spectrometer designs in the hard X-ray regime. Due to their large solid angle coverage and focusing properties, toroidally bent crystals are extremely useful in applications where the output of photons is low. Spherically bent crystals, a subgroup of toroidally bent crystals, particularly have found their way in many instruments at synchtrotrons and free electron laser lightsource end-stations but also in the re-emerging field of high-resolution laboratory-scale X-ray spectroscopy. A solid theoretical understanding of the diffraction properties of such crystals is essential when aiming for optimal spectrometer performance. In this work, we present a general method to calculate the internal stress and strain fields of toroidally bent crystals and how to apply it to predict their diffraction properties. Solutions are derived and discussed for circular and rectangular spherically bent wafers due to their prevalence in contemporary instrumentation.
△ Less
Submitted 18 May, 2020;
originally announced June 2020.
-
Sparse dynamic tomography. A shearlet-based approach for iodine perfusion in plant stems
Authors:
Tatiana A. Bubba,
Tommi Heikkilä,
Hanna Help,
Simo Huotari,
Yann Salmon,
Samuli Siltanen
Abstract:
In this paper we propose a motion-aware variational approach to reconstruct moving objects from sparse dynamic data. The motivation of this work stems from X-ray imaging of plants perfused with a liquid contrast agent, aimed at increasing the contrast of the images and studying the phloem transport in plants over time. The key idea of our approach is to deploy 3D shearlets as a space-temporal prio…
▽ More
In this paper we propose a motion-aware variational approach to reconstruct moving objects from sparse dynamic data. The motivation of this work stems from X-ray imaging of plants perfused with a liquid contrast agent, aimed at increasing the contrast of the images and studying the phloem transport in plants over time. The key idea of our approach is to deploy 3D shearlets as a space-temporal prior, treating time as the third dimension. The rationale behind this model is that a continuous evolution of a cartoon-like object is well suited for the use of 3D shearlets. We provide a basic mathematical analysis of the variational model for the image reconstruction. The numerical minimization is carried out with primal-dual scheme coupled with an automated choice of regularization parameter. We test our model on different measurement setups: a simulated phantom especially designed to resemble a plant stem, with spreading points to simulate a spreading contrast agent; a measured agarose gel phantom to demonstrate iodide diffusion and geometry prior to imaging living sample; a measured living tree grown \textit{in vitro} and perfused with a liquid sugar-iodine-mix. The results, compared against a 2D static model, show that our approach provides reconstructions that capture well the time dynamic of the contrast agent onset and are encouraging to develop microCT as a tool to study phloem transport using iodine tracer.
△ Less
Submitted 27 February, 2020;
originally announced February 2020.
-
Johann-type laboratory-scale X-ray absorption spectrometer with versatile detection modes
Authors:
Ari-Pekka Honkanen,
Sami Ollikkala,
Taru Ahopelto,
Antti-Jussi Kallio,
Merja Blomberg,
Simo Huotari
Abstract:
We present a low-cost laboratory X-ray absorption spectrometer that uses a conventional X-ray tube source and bent Johann-type crystal monochromators. The instrument is designed for XAS studies in the 4-20 keV range which covers most K edges of 3d transition metals and L edges of 5d transition metals and actinides. The energy resolution is typically in the range of 1-5 eV at 10 keV depending on th…
▽ More
We present a low-cost laboratory X-ray absorption spectrometer that uses a conventional X-ray tube source and bent Johann-type crystal monochromators. The instrument is designed for XAS studies in the 4-20 keV range which covers most K edges of 3d transition metals and L edges of 5d transition metals and actinides. The energy resolution is typically in the range of 1-5 eV at 10 keV depending on the crystal analyser and the Bragg angle. Measurements can be performed in transmission, fluorescence, and imaging modes. Due to its simple and modular design, the spectrometer can be modified to accommodate additional equipment and complex sample environments required for e.g. in situ studies. A showcase of various applications is presented.
△ Less
Submitted 8 March, 2019; v1 submitted 3 December, 2018;
originally announced December 2018.
-
The isotropic Compton profile difference across the phase transition of VO$_2$
Authors:
Kari O. Ruotsalainen,
Juho Inkinen,
Tuomas Pylkkänen,
Thomas Buslaps,
Mikko Hakala,
Keijo Hämäläinen,
Simo Huotari
Abstract:
We studied the isotropic Compton profile of the prototypical oxide VO$_2$ across the temperature induced electronic and structural phase transition at T$_C$ $\approx$ 340 K. We show that the phase transition leaves an observable signal, which facilitates Compton scattering studies of electronic structure and phase transitions in complex solids in powder form. We compare the experimental results wi…
▽ More
We studied the isotropic Compton profile of the prototypical oxide VO$_2$ across the temperature induced electronic and structural phase transition at T$_C$ $\approx$ 340 K. We show that the phase transition leaves an observable signal, which facilitates Compton scattering studies of electronic structure and phase transitions in complex solids in powder form. We compare the experimental results with density functional theory calculations and find agreement in the shape of the difference profile, although the amplitude of the observed features is overestimated. The origin of the disagreement is discussed and we argue that it mainly originates mostly correlation effects beyond our current calculations and possibly to some extent, from thermal motion.
△ Less
Submitted 4 July, 2018;
originally announced July 2018.
-
Tomographic X-ray data of a lotus root filled with attenuating objects
Authors:
Tatiana A. Bubba,
Andreas Hauptmann,
Simo Huotari,
Juho Rimpeläinen,
Samuli Siltanen
Abstract:
This is the documentation of the tomographic X-ray data of a lotus root, filled with four different attenuating objects, of different sizes. Data are available at www.fips.fi/dataset.php, and can be freely used for scientific purposes with appropriate references to them, and to this document in http://arxiv.org/arXiv. The data set consists of (1) the X-ray sinogram of a single 2D slice of the lotu…
▽ More
This is the documentation of the tomographic X-ray data of a lotus root, filled with four different attenuating objects, of different sizes. Data are available at www.fips.fi/dataset.php, and can be freely used for scientific purposes with appropriate references to them, and to this document in http://arxiv.org/arXiv. The data set consists of (1) the X-ray sinogram of a single 2D slice of the lotus root with two different resolutions and (2) the corresponding measurement matrices modeling the linear operation of the X-ray transform. Each of these sinograms was obtained from a measured 360-projection fan-beam sinogram by down-sampling and taking logarithms. The original (measured) sinogram is also provided in its original form and resolution.
△ Less
Submitted 13 October, 2016; v1 submitted 23 September, 2016;
originally announced September 2016.
-
First-principles analysis of the intermediate band in CuGa$_{1-x}$Fe$_x$S$_2$
Authors:
J. Koskelo,
J. Hashemi,
S. Huotari,
M. Hakala
Abstract:
We present a comprehensive study of the electronic, magnetic, and optical properties of CuGa$_{1-x}$Fe$_x$S$_2$, as a promising candidate for intermediate-band (IB) solar cells. We use hybrid exchange-correlation functional within the density functional theory framework, and show that Fe doping induces unoccupied states 1.6-1.9 eV above the valence band. The IBs significantly enhance the optical a…
▽ More
We present a comprehensive study of the electronic, magnetic, and optical properties of CuGa$_{1-x}$Fe$_x$S$_2$, as a promising candidate for intermediate-band (IB) solar cells. We use hybrid exchange-correlation functional within the density functional theory framework, and show that Fe doping induces unoccupied states 1.6-1.9 eV above the valence band. The IBs significantly enhance the optical absorption in lower energy part of the spectrum. We find that at moderate $n$-type co-doping concentration, the added charge occupies part of the IB in the gap, but large concentrations lower the energy of the occupied IB toward the valence band. Moreover, we show that Fe impurities tend to cluster within the compound and they choose antiferromagnetic ordering. The findings can have a significant effect in understanding this material and help to synthesize more efficient IB solar cells.
△ Less
Submitted 7 April, 2016;
originally announced April 2016.
-
Electron-energy-loss and time-dependent density functional theory study on the plasmon dispersion in 2H-NbS2
Authors:
Pierluigi Cudazzo,
Eric Müller,
Carsten Habenicht,
Matteo Gatti,
Helmuth Berger,
Martin Knupfer,
Angel Rubio,
Simo Huotari
Abstract:
We examine the experimental and theoretical electron-energy loss spectra in 2$H$-Cu$_{0.2}$NbS$_2$ and find that the 1 eV plasmon in this material does not exhibit the regular positive quadratic plasmon dispersion that would be expected for a normal broad-parabolic-band system. Instead we find a nearly non-dispersing plasmon in the momentum-transfer range $q<0.35$ Å$^{-1}$. We argue that for a sto…
▽ More
We examine the experimental and theoretical electron-energy loss spectra in 2$H$-Cu$_{0.2}$NbS$_2$ and find that the 1 eV plasmon in this material does not exhibit the regular positive quadratic plasmon dispersion that would be expected for a normal broad-parabolic-band system. Instead we find a nearly non-dispersing plasmon in the momentum-transfer range $q<0.35$ Å$^{-1}$. We argue that for a stoichiometric pure 2$H$-NbS$_2$ the dispersion relation is expected to have a negative slope as is the case for other transition-metal dichalcogenides. The presence of Cu impurities, required to stabilize the crystal growth, tends to shift the negative plasmon dispersion into a positive one, but the doping level in the current system is small enough to result in a nearly-non-dispersing plasmon. We conclude that a negative-slope plasmon dispersion is not connected with the existence of a charge-density-wave order in transition metal dichalcogenides.
△ Less
Submitted 13 January, 2017; v1 submitted 10 March, 2016;
originally announced March 2016.
-
A computationally efficient method to solve the Takagi-Taupin equations for a large deformed crystal
Authors:
Ari-Pekka Honkanen,
Giulio Monaco,
Simo Huotari
Abstract:
We present a treatise on solving the Takagi-Taupin equations in the case of a strain field with an additional, spatially slowly varying component (owing to \emph{e.g.}~heat expansion or angular compression). We show that the presence of such a component in a typical case merely shifts the reflectivity curve as a function of wavelength or incidence angle, while having a negligible effect on its sha…
▽ More
We present a treatise on solving the Takagi-Taupin equations in the case of a strain field with an additional, spatially slowly varying component (owing to \emph{e.g.}~heat expansion or angular compression). We show that the presence of such a component in a typical case merely shifts the reflectivity curve as a function of wavelength or incidence angle, while having a negligible effect on its shape. On the basis of the derived result, we develop a computationally efficient method to calculate the reflectivity curve of a large deformed crystal. The validity of the method is demonstrated by comparing computed reflectivity curves with experimental ones for bent silicon wafers. A good agreement is observed.
△ Less
Submitted 2 June, 2016; v1 submitted 27 January, 2016;
originally announced January 2016.
-
Resonant X-ray Emission Spectroscopy With a Standing Wave Excitation
Authors:
Kari O. Ruotsalainen,
Ari-Pekka Honkanen,
Stephen P. Collins,
Giulio Monaco,
Marco Moretti Sala,
Michael Krisch,
Keijo Hämäläinen,
Mikko Hakala,
Simo Huotari
Abstract:
The Borrmann effect is the anomalous transmission of x rays in perfect crystals under diffraction conditions. It arises from the interference of the incident and diffracted waves, which creates a standing wave with nodes at strongly absorbing atoms. Dipolar absorption of x rays is thus diminished, which makes the crystal nearly transparent for certain x-ray wave vectors. Indeed, a relative enhance…
▽ More
The Borrmann effect is the anomalous transmission of x rays in perfect crystals under diffraction conditions. It arises from the interference of the incident and diffracted waves, which creates a standing wave with nodes at strongly absorbing atoms. Dipolar absorption of x rays is thus diminished, which makes the crystal nearly transparent for certain x-ray wave vectors. Indeed, a relative enhancement of electric quadrupole absorption via the Borrmann effect has been demonstrated recently. Here we show that the Borrmann effect has a significantly larger impact on resonant x-ray emission than is observable in x-ray absorption. Emission from a dipole forbidden intermediate state may even dominate the corresponding x-ray spectra. Our work extends the domain of x-ray standing wave methods to resonant x-ray emission spectroscopy and provides means for novel spectroscopic experiments in d- and f-electron systems.
△ Less
Submitted 13 January, 2017; v1 submitted 17 November, 2015;
originally announced November 2015.
-
Exciton energy-momentum map of hexagonal boron nitride
Authors:
Giorgia Fugallo,
Matteo Aramini,
Jaakko Koskelo,
Kenji Watanabe,
Takashi Taniguchi,
Mikko Hakala,
Simo Huotari,
Matteo Gatti,
Francesco Sottile
Abstract:
Understanding and controlling the way excitons propagate in solids is a key for tailoring materials with improved optoelectronic properties. A fundamental step in this direction is the determination of the exciton energy-momentum dispersion. Here, thanks to the solution of the parameter-free Bethe- Salpeter equation (BSE), we draw and explain the exciton energy-momentum map of hexagonal boron nitr…
▽ More
Understanding and controlling the way excitons propagate in solids is a key for tailoring materials with improved optoelectronic properties. A fundamental step in this direction is the determination of the exciton energy-momentum dispersion. Here, thanks to the solution of the parameter-free Bethe- Salpeter equation (BSE), we draw and explain the exciton energy-momentum map of hexagonal boron nitride (h-BN) in the first three Brillouin zones. We show that h-BN displays strong excitonic effects not only in the optical spectra at vanishing momentum $\mathbf{q}$, as previously reported, but also at large $\mathbf{q}$. We validate our theoretical predictions by assessing the calculated exciton map by means of an inelastic x-ray scattering (IXS) experiment. Moreover, we solve the discrepancies between previous experimental data and calculations, proving then that the BSE is highly accurate through the whole momentum range. Therefore, these results put forward the combination BSE and IXS as the tool of choice for addressing the exciton dynamics in complex materials.
△ Less
Submitted 7 August, 2015;
originally announced August 2015.
-
Temperature dependence of crystal field excitations in CuO
Authors:
Simo Huotari,
Laura Simonelli,
Christoph J. Sahle,
Marco Moretti Sala,
Roberto Verbeni,
Giulio Monaco
Abstract:
We report a study on the temperature dependence of the charge-neutral crystal field (dd) excitations in cupric oxide, using nonresonant inelastic x-ray scattering (IXS) spectroscopy. Thanks to a very high energy resolution (60 meV), we observe thermal effects on the dd excitation spectrum fine structure between temperatures of 10-320 K. With an increasing temperature, the spectra broaden considera…
▽ More
We report a study on the temperature dependence of the charge-neutral crystal field (dd) excitations in cupric oxide, using nonresonant inelastic x-ray scattering (IXS) spectroscopy. Thanks to a very high energy resolution (60 meV), we observe thermal effects on the dd excitation spectrum fine structure between temperatures of 10-320 K. With an increasing temperature, the spectra broaden considerably. We assign the temperature dependence of the dd excitations to the relatively large electron-phonon coupling.
△ Less
Submitted 24 October, 2013;
originally announced October 2013.
-
Momentum distribution and Compton profile by the ab initio GW approximation
Authors:
Valerio Olevano,
Andrey Titov,
Massimo Ladisa,
Keijo Hämäläinen,
Simo Huotari,
Markus Holzmann
Abstract:
We present two possible approaches to calculate the momentum distribution n(p) and the Compton profile within the framework of the ab initio GW approximation on the self-energy. The approaches are based on integration of the Green's function along either the real or the imaginary axes. Examples will be presented on the jellium model and on real bulk sodium. Advantages and drawbacks of both methods…
▽ More
We present two possible approaches to calculate the momentum distribution n(p) and the Compton profile within the framework of the ab initio GW approximation on the self-energy. The approaches are based on integration of the Green's function along either the real or the imaginary axes. Examples will be presented on the jellium model and on real bulk sodium. Advantages and drawbacks of both methods are discussed in comparison with accurate quantum Monte Carlo (QMC) calculations and x-ray Compton scattering experiments. We illustrate the effect of many-body correlations and disentangle them from band-structure and anisotropy effects by a comparison with density functional theory in the local density approximation. Our results suggest the use of G0W0 momentum distributions as reference for future experiments and theory developments.
△ Less
Submitted 26 October, 2012;
originally announced October 2012.
-
Screening in YBCO at large wave vectors
Authors:
Simo Huotari,
J. Aleksi Soininen,
György Vankó,
Giulio Monaco,
Valerio Olevano
Abstract:
We present experimental inelastic x-ray scattering (IXS) and ab initio time-dependent density-functional-theory (TDDFT) studies of YBa2Cu3O7-δ. The response of the low-lying Ba 5p and Y 4p core electrons is shown to interact strongly with the Cu 3d and O 2p excitations, with important consequences on screening. The agreement between IXS and TDDFT results is excellent, apart from a new type of exci…
▽ More
We present experimental inelastic x-ray scattering (IXS) and ab initio time-dependent density-functional-theory (TDDFT) studies of YBa2Cu3O7-δ. The response of the low-lying Ba 5p and Y 4p core electrons is shown to interact strongly with the Cu 3d and O 2p excitations, with important consequences on screening. The agreement between IXS and TDDFT results is excellent, apart from a new type of excitations, mainly related to loosely bound Ba electrons and significantly affected by correlations. This points to correlation mechanisms not fully described by TDDFT that might have a role in giving rise to antiscreening.
△ Less
Submitted 5 November, 2010;
originally announced November 2010.
-
Bimagnon studies in cuprates with Resonant Inelastic X-ray Scattering at the O K edge. I - An assessment on La2CuO4 and a comparison with the excitation at Cu L3 and Cu K edges
Authors:
V. Bisogni,
L. Simonelli,
L. J. P. Ament,
F. Forte,
M. Moretti Sala,
M. Minola,
S. Huotari,
J. van den Brink,
G. Ghiringhelli,
N. B. Brookes,
L. Braicovich
Abstract:
We assess the capabilities of magnetic Resonant Inelastic X-ray Scattering (RIXS) at the O $K$ edge in undoped cuprates by taking La_{2}CuO_{4} as a benchmark case, based on a series of RIXS measurements that we present here. By combining the experimental results with basic theory we point out the fingerprints of bimagnon in the O $K$ edge RIXS spectra. These are a dominant peak around 450 meV, th…
▽ More
We assess the capabilities of magnetic Resonant Inelastic X-ray Scattering (RIXS) at the O $K$ edge in undoped cuprates by taking La_{2}CuO_{4} as a benchmark case, based on a series of RIXS measurements that we present here. By combining the experimental results with basic theory we point out the fingerprints of bimagnon in the O $K$ edge RIXS spectra. These are a dominant peak around 450 meV, the almost complete absence of dispersion both with $π$ and $σ$ polarization and the almost constant intensity vs. the transferred momentum with $σ$ polarization. This behavior is quite different from Cu $L_3$ edge RIXS giving a strongly dispersing bimagnon tending to zero at the center of the Brillouin zone. This is clearly shown by RIXS measurements at the Cu $L_3$ edge that we present. The Cu $L_3$ bimagnon spectra and those at Cu $K$ edge - both from the literature and from our data - however, have the same shape. These similarities and differences are understood in terms of different sampling of the bimagnon continuum. This panorama points out the unique possibilities offered by O $K$ RIXS in the study of magnetic excitations in cuprates near the center of the BZ.
△ Less
Submitted 28 June, 2012; v1 submitted 20 October, 2010;
originally announced October 2010.
-
Momentum Distribution and Renormalization Factor in Sodium and the Electron Gas
Authors:
Simo Huotari,
J. Aleksi Soininen,
Tuomas Pylkkänen,
Keijo Hämäläinen,
Arezki Issolah,
Andrey Titov,
Jeremy McMinis,
Jeongnim Kim,
Ken Esler,
David M. Ceperley,
Markus Holzmann,
Valerio Olevano
Abstract:
We present experimental and theoretical results on the momentum distribution and the quasiparticle renormalization factor in sodium. From an x-ray Compton-profile measurement of the valence-electron momentum density, we derive its discontinuity at the Fermi wavevector. This yields an accurate measure of the renormalization factor that we compare with quantum Monte Carlo and GW calculations perform…
▽ More
We present experimental and theoretical results on the momentum distribution and the quasiparticle renormalization factor in sodium. From an x-ray Compton-profile measurement of the valence-electron momentum density, we derive its discontinuity at the Fermi wavevector. This yields an accurate measure of the renormalization factor that we compare with quantum Monte Carlo and GW calculations performed both on crystalline sodium and on the homogeneous electron gas. Our calculated results are in good agreement with the experiment.
△ Less
Submitted 29 June, 2010;
originally announced June 2010.
-
Anisotropic excitonic effects in the energy loss function of hexagonal boron nitride
Authors:
S. Galambosi,
L. Wirtz,
J. A. Soininen,
J. Serrano,
A. Marini,
K. Watanabe,
T. Taniguchi,
S. Huotari,
A. Rubio,
K. Hämäläinen
Abstract:
We demonstrate that the valence energy-loss function of hexagonal boron nitride (hBN) displays a strong anisotropy in shape, excitation energy and dispersion for momentum transfer q parallel or perpendicular to the hBN layers. This is manifested by e.g. an energy shift of 0.7 eV that cannot be captured by single-particle approaches and is a demonstration of a strong anisotropy in the two-body el…
▽ More
We demonstrate that the valence energy-loss function of hexagonal boron nitride (hBN) displays a strong anisotropy in shape, excitation energy and dispersion for momentum transfer q parallel or perpendicular to the hBN layers. This is manifested by e.g. an energy shift of 0.7 eV that cannot be captured by single-particle approaches and is a demonstration of a strong anisotropy in the two-body electron-hole interaction. Furthermore, for in-plane directions of q we observe a splitting of the -plasmon in the M direction that is absent in the K direction and this can be traced back to band-structure effects.
△ Less
Submitted 6 May, 2010;
originally announced May 2010.
-
Valence band electronic structure of V2O3: identification of V and O bands
Authors:
E. Papalazarou,
Matteo Gatti,
M. Marsi,
V. Brouet,
F. Iori,
Lucia Reining,
E. Annese,
I. Vobornik,
F. Offi,
A. Fondacaro,
S. Huotari,
P. Lacovig,
O. Tjernberg,
N. B. Brookes,
M. Sacchi,
P. Metcalf,
G. Panaccione
Abstract:
We present a comprehensive study of the photon energy dependence of the valence band photoemission yield in the prototype Mott-Hubbard oxide V2O3. The analysis of our experimental results, covering an extended photon energy range (20-6000 eV) and combined with GW calculations, allow us to identify the nature of the orbitals contributing to the total spectral weight at different binding energies,…
▽ More
We present a comprehensive study of the photon energy dependence of the valence band photoemission yield in the prototype Mott-Hubbard oxide V2O3. The analysis of our experimental results, covering an extended photon energy range (20-6000 eV) and combined with GW calculations, allow us to identify the nature of the orbitals contributing to the total spectral weight at different binding energies, and in particular to locate the V 4s at about 8 eV binding energy.
From this comparative analysis we can conclude that the intensity of the quasiparticle photoemission peak, observed close to the Fermi level in the paramagnetic metallic phase upon increasing photon energy, does not have a significant correlation with the intensity variation of the O 2p and V 3d yield, thus confirming that bulk sensitivity is an essential requirement for the detection of this coherent low energy excitation.
△ Less
Submitted 25 March, 2009;
originally announced March 2009.
-
Intersite 4p-3d hybridization in cobalt oxides: a resonant x-ray emission spectroscopy study
Authors:
György Vankó,
Frank M. F. de Groot,
Simo Huotari,
R. J. Cava,
Thomas Lorenz,
M. Reuther
Abstract:
We report on strong dipole transitions to 3d orbitals of neighboring Co atoms in the Co 1s x-ray absorption pre-edge. They are revealed by applying high-resolution resonant x-ray emission spectroscopy (RXES) to compounds containing CoO6 clusters. When contrasted to quadrupole local 1s3d excitations, these non-local 1s3d transitions are identified by their energy dispersion and angular dependence…
▽ More
We report on strong dipole transitions to 3d orbitals of neighboring Co atoms in the Co 1s x-ray absorption pre-edge. They are revealed by applying high-resolution resonant x-ray emission spectroscopy (RXES) to compounds containing CoO6 clusters. When contrasted to quadrupole local 1s3d excitations, these non-local 1s3d transitions are identified by their energy dispersion and angular dependence, their sensitivity to second-shell effects (i.e. the connection mode of the CoO6 octahedra and the bond lengths), and an upwards energy shift of 2.5 eV due to the poorer screening of the core hole. The experiment reveals that the intensity of the non-local transitions gauges the oxygen-mediated 4p-O-3d intersite hybridization. We propose a revised interpretation of the pre-edges of transition metal compounds. Detailed analysis of these new features in the pre-edge offers a unique insight in the oxygen mediated metal-metal interactions in transition metal-based systems, which is a crucial aspect in orbital ordering and related electronic and magnetic properties. In addition, the exceptional resolving power of the present 1s2p RXES experiment allows us to demonstrate the coherent second-order nature of the underlying scattering process.
△ Less
Submitted 20 February, 2008;
originally announced February 2008.
-
X-ray Raman scattering study of aligned polyfluorene
Authors:
S. Galambosi,
M. Knaapila,
J. A. Soininen,
K. Nygård,
S. Huotari,
F. Galbrecht,
U. Scherf,
A. P. Monkman,
K. Hämäläinen
Abstract:
We present a non-resonant inelastic x-ray scattering study at the carbon K-edge on aligned poly[9,9-bis(2-ethylhexyl)-fluorene-2,7-diyl] and show that the x-ray Raman scattering technique can be used as a practical alternative to x-ray absorption measurements. We demonstrate that this novel method can be applied to studies on aligned $π$-conjugated polymers complementing diffraction and optical…
▽ More
We present a non-resonant inelastic x-ray scattering study at the carbon K-edge on aligned poly[9,9-bis(2-ethylhexyl)-fluorene-2,7-diyl] and show that the x-ray Raman scattering technique can be used as a practical alternative to x-ray absorption measurements. We demonstrate that this novel method can be applied to studies on aligned $π$-conjugated polymers complementing diffraction and optical studies. Combining the experimental data and a very recently proposed theoretical scheme we demonstrate a unique property of x-ray Raman scattering by performing the symmetry decomposition on the density of unoccupied electronic states into $s$- and $p$-type symmetry contributions.
△ Less
Submitted 29 August, 2006;
originally announced August 2006.
-
Fermi-surface mapping from Compton profiles: Application to beryllium
Authors:
G. Kontrym-Sznajd,
M. Samsel-Czekala,
S. Huotari,
K. Hamalainen,
S. Manninen
Abstract:
The two-dimensional momentum density of Be on the basal GMK plane, i.e. the line integral of the three-dimensional momentum density along the c-axis, is reconstructed via the Cormack method from both experimental and theoretical Compton profiles. It is shown that in the case of Be, despite the momentum density is highly anisotropic, merely two Compton profiles are sufficient to reproduce the mai…
▽ More
The two-dimensional momentum density of Be on the basal GMK plane, i.e. the line integral of the three-dimensional momentum density along the c-axis, is reconstructed via the Cormack method from both experimental and theoretical Compton profiles. It is shown that in the case of Be, despite the momentum density is highly anisotropic, merely two Compton profiles are sufficient to reproduce the main features of the momentum density. The analysis of the reconstructed densities is performed both in the extended and reduced zone schemes.
△ Less
Submitted 23 June, 2003;
originally announced June 2003.
-
Electron momentum density in yttrium
Authors:
G. Kontrym-Sznajd,
M. Samsel-Czekala,
A. Pietraszko,
H. Sormann,
S. Manninen,
S. Huotari,
K. Hamalainen,
J. Laukkanen,
R. N. West,
W. Schulke
Abstract:
A simultaneous analysis of high-resolution directional Compton profiles and two-dimensional angular correlation of positron annihilation experimental data has been performed by studying both a directional anisotropy of measured spectra and reconstructed densities. The results were compared with theoretical fully-relativistic augmented plane-wave calculations with and without including correlatio…
▽ More
A simultaneous analysis of high-resolution directional Compton profiles and two-dimensional angular correlation of positron annihilation experimental data has been performed by studying both a directional anisotropy of measured spectra and reconstructed densities. The results were compared with theoretical fully-relativistic augmented plane-wave calculations with and without including correlation effects. Estimated symmetry selection rules have allowed us to establish some values of Fermi momenta. Both experiments show exactly the same shape of the anisotropy of the momentum densities, in agreement with the band structure results. In the positron annihilation data electron-positron correlations are not seen while in both experiments electron-electron correlations are observed.
△ Less
Submitted 12 September, 2002;
originally announced September 2002.
-
Electrode thickness measurement of a Si(Li) detector for the SIXA array
Authors:
T. Tikkanen,
K. Hamalainen,
S. Huotari
Abstract:
Cathode electrodes of the Si(Li) detector elements of the SIXA X-ray spectrometer array are formed by gold-palladium alloy contact layers. The equivalent thickness of gold in one element was measured by observing the characteristic L-shell X-rays of gold excited by monochromatised synchrotron radiation with photon energies above the L3 absorption edge of gold. The results obtained at 4 different…
▽ More
Cathode electrodes of the Si(Li) detector elements of the SIXA X-ray spectrometer array are formed by gold-palladium alloy contact layers. The equivalent thickness of gold in one element was measured by observing the characteristic L-shell X-rays of gold excited by monochromatised synchrotron radiation with photon energies above the L3 absorption edge of gold. The results obtained at 4 different photon energies below the L2 edge yield an average value of 22.4(35) nm which is consistent with the earlier result extracted from detection efficiency measurements.
PACS: 29.40.Wk; 85.30.De; 07.85.Nc; 95.55.Ka
Keywords: Si(Li) detectors, X-ray spectrometers, X-ray fluorescence, detector calibration, gold electrodes, synchrotron radiation
△ Less
Submitted 8 October, 1997;
originally announced October 1997.
