-
High-granularity Dual-readout Calorimeter: Evolution of a Classic Prototype
Authors:
N. Akchurin,
J. Cash,
J. Damgov,
X. Delashaw,
K. Lamichhane,
M. Harris,
M. Kelley,
S. Kunori,
H. Mergate-Cacace,
T. Peltola,
O. Schneider,
J. Sewell
Abstract:
The original dual-readout calorimeter prototype (DREAM), constructed two decades ago, has proven instrumental in advancing our understanding of calorimetry. It has facilitated a multitude of breakthroughs by leveraging signals from complementary media (Cherenkov and scintillation) to capture fluctuations in electromagnetic energy fraction within hadronic showers. Over the years, extensive studies…
▽ More
The original dual-readout calorimeter prototype (DREAM), constructed two decades ago, has proven instrumental in advancing our understanding of calorimetry. It has facilitated a multitude of breakthroughs by leveraging signals from complementary media (Cherenkov and scintillation) to capture fluctuations in electromagnetic energy fraction within hadronic showers. Over the years, extensive studies have shed light on the performance characteristics of this module, rendering it exceptionally well-understood. Drawing on this wealth of experience, we have embarked on enhancing the detectors' capabilities further by integrating fast silicon photomultipliers (SiPMs) with finer transverse segmentation, $\sim$1 cm$^2$, as well as longitudinal segmentation by timing measuring better than 10 cm. This configuration will allow us to image hadronic showers with high granularity (HG-DREAM). We argue that the spatial information provided by such a granular detector in a short time window ($\approx$5 ns) leads to substantial enhancement in energy resolution when advanced neural networks are employed in energy reconstruction. We briefly present the current status of work, new concepts that have been introduced to the detector, and expectations from simulations.
△ Less
Submitted 27 August, 2024;
originally announced August 2024.
-
Vertex Imaging Hadron Calorimetry Using AI/ML Tools
Authors:
N. Akchurin,
J. Cash,
J. Damgov,
X. Delashaw,
K. Lamichhane,
M. Harris,
M. Kelley,
S. Kunori,
H. Mergate-Cacace,
T. Peltola,
O. Schneider,
J. Sewell
Abstract:
The fluctuations in energy loss to processes that do not generate measurable signals, such as binding energy losses, set the limit on achievable hadronic energy resolution in traditional energy reconstruction techniques. The correlation between the number of hadronic interaction vertices in a shower and invisible energy is found to be strong and is used to estimate invisible energy fraction in hig…
▽ More
The fluctuations in energy loss to processes that do not generate measurable signals, such as binding energy losses, set the limit on achievable hadronic energy resolution in traditional energy reconstruction techniques. The correlation between the number of hadronic interaction vertices in a shower and invisible energy is found to be strong and is used to estimate invisible energy fraction in highly granular calorimeters in short time intervals (<10 ns). We simulated images of hadronic showers using GEANT4 and deployed a neural network to analyze the images for energy regression. The neural network-based approach results in significant improvement in energy resolution, from 13 % to 4 % in the case of a Cherenkov calorimeter for 100 GeV pion showers. We discuss the significance of the phenomena responsible for this improvement and the plans for experimental verification of these results and further development.
△ Less
Submitted 5 September, 2024; v1 submitted 27 August, 2024;
originally announced August 2024.
-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
J. P. Figueiredo de sa Sousa de Almeida,
P. G. Dias de Almeida,
A. Alpana,
M. Alyari,
I. Andreev,
U. Aras,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Banerjee,
P. DeBarbaro,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (435 additional authors not shown)
Abstract:
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med…
▽ More
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.
△ Less
Submitted 27 May, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Perspectives on the Calibration of CNN Energy Reconstruction in Highly Granular Calorimeters
Authors:
N. Akchurin,
C. Cowden,
J. Damgov,
A. Hussain,
S. Kunori
Abstract:
We present a study which shows encouraging stability of the response linearity for a simulated high granularity calorimeter module reconstructed by a CNN model to miscalibration, bias, and noise effects. Our results also show an intuitive, quantifiable relationship between these factors and the calibration parameters. We trained a CNN model to reconstruct energy in the calorimeter module using sim…
▽ More
We present a study which shows encouraging stability of the response linearity for a simulated high granularity calorimeter module reconstructed by a CNN model to miscalibration, bias, and noise effects. Our results also show an intuitive, quantifiable relationship between these factors and the calibration parameters. We trained a CNN model to reconstruct energy in the calorimeter module using simulated single-pion events; we then observed the response of the model under various miscalibration, bias, and noise conditions that affected the model input. From these data, we estimated linear response models to calibrate the CNN. We also quantified the relationship between these factors and the calibration parameters by regression analysis.
△ Less
Submitted 8 August, 2022; v1 submitted 24 August, 2021;
originally announced August 2021.
-
On the Use of Neural Networks for Energy Reconstruction in High-granularity Calorimeters
Authors:
N. Akchurin,
C. Cowden,
J. Damgov,
A. Hussain,
S. Kunori
Abstract:
We contrasted the performance of deep neural networks - Convolutional Neural Network (CNN) and Graph Neural Network (GNN) - to current state of the art energy regression methods in a finely 3D-segmented calorimeter simulated by GEANT4. This comparative benchmark gives us some insight to assess the particular latent signals neural network methods exploit to achieve superior resolution. A CNN traine…
▽ More
We contrasted the performance of deep neural networks - Convolutional Neural Network (CNN) and Graph Neural Network (GNN) - to current state of the art energy regression methods in a finely 3D-segmented calorimeter simulated by GEANT4. This comparative benchmark gives us some insight to assess the particular latent signals neural network methods exploit to achieve superior resolution. A CNN trained solely on a pure sample of pions achieved substantial improvement in the energy resolution for both single pions and jets over the conventional approaches. It maintained good performance for electron and photon reconstruction. We also used the Graph Neural Network (GNN) with edge convolution to assess the importance of timing information in the shower development for improved energy reconstruction. We implement a simple simulation based correction to the energy sum derived from the fraction of energy deposited in the electromagnetic shower component. This serves as an approximate dual-readout analogue for our benchmark comparison. Although this study does not include the simulation of detector effects, such as electronic noise, the margin of improvement seems robust enough to suggest these benefits will endure in real-world application. We also find reason to infer that the CNN/GNN methods leverage latent features that concur with our current understanding of the physics of calorimeter measurement.
△ Less
Submitted 4 January, 2022; v1 submitted 21 July, 2021;
originally announced July 2021.
-
Construction and commissioning of CMS CE prototype silicon modules
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul…
▽ More
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca…
▽ More
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers.
△ Less
Submitted 8 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Cerium-Doped Fused-Silica Fibers as Wavelength Shifters
Authors:
N. Akchurin,
N. Bartosik,
J. Damgov,
F. De Guio,
G. Dissertori,
E. Kendir,
S. Kunori,
T. Mengke,
F. Nessi-Tedaldi,
N. Pastrone,
S. Pigazzini,
Ş. Yaltkayab
Abstract:
We have evaluated the performance of a Ce-doped fused-silica fiber as wavelength shifter coupled to a CeF$_{3}$ crystal using electron beams at CERN. The pulse shape and collection efficiency were measured using irradiated (100 kGy) and un-irradiated fibers. In addition, we evaluated the light yield of various Ce-doped fibers and explored the possibility of using them in the future, including for…
▽ More
We have evaluated the performance of a Ce-doped fused-silica fiber as wavelength shifter coupled to a CeF$_{3}$ crystal using electron beams at CERN. The pulse shape and collection efficiency were measured using irradiated (100 kGy) and un-irradiated fibers. In addition, we evaluated the light yield of various Ce-doped fibers and explored the possibility of using them in the future, including for precision timing applications in a high-luminosity collider environment.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
Dark Matter Benchmark Models for Early LHC Run-2 Searches: Report of the ATLAS/CMS Dark Matter Forum
Authors:
Daniel Abercrombie,
Nural Akchurin,
Ece Akilli,
Juan Alcaraz Maestre,
Brandon Allen,
Barbara Alvarez Gonzalez,
Jeremy Andrea,
Alexandre Arbey,
Georges Azuelos,
Patrizia Azzi,
Mihailo Backović,
Yang Bai,
Swagato Banerjee,
James Beacham,
Alexander Belyaev,
Antonio Boveia,
Amelia Jean Brennan,
Oliver Buchmueller,
Matthew R. Buckley,
Giorgio Busoni,
Michael Buttignol,
Giacomo Cacciapaglia,
Regina Caputo,
Linda Carpenter,
Nuno Filipe Castro
, et al. (114 additional authors not shown)
Abstract:
This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of t…
▽ More
This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of the parameter space of these models and a repository of generator implementations. This report also addresses how to apply the Effective Field Theory formalism for collider searches and present the results of such interpretations.
△ Less
Submitted 3 July, 2015;
originally announced July 2015.
-
Simplified Models for Dark Matter Searches at the LHC
Authors:
Jalal Abdallah,
Henrique Araujo,
Alexandre Arbey,
Adi Ashkenazi,
Alexander Belyaev,
Joshua Berger,
Celine Boehm,
Antonio Boveia,
Amelia Brennan,
Jim Brooke,
Oliver Buchmueller,
Matthew Buckley,
Giorgio Busoni,
Lorenzo Calibbi,
Sushil Chauhan,
Nadir Daci,
Gavin Davies,
Isabelle De Bruyn,
Paul De Jong,
Albert De Roeck,
Kees de Vries,
Daniele Del Re,
Andrea De Simone,
Andrea Di Simone,
Caterina Doglioni
, et al. (72 additional authors not shown)
Abstract:
This document outlines a set of simplified models for dark matter and its interactions with Standard Model particles. It is intended to summarize the main characteristics that these simplified models have when applied to dark matter searches at the LHC, and to provide a number of useful expressions for reference. The list of models includes both s-channel and t-channel scenarios. For s-channel, sp…
▽ More
This document outlines a set of simplified models for dark matter and its interactions with Standard Model particles. It is intended to summarize the main characteristics that these simplified models have when applied to dark matter searches at the LHC, and to provide a number of useful expressions for reference. The list of models includes both s-channel and t-channel scenarios. For s-channel, spin-0 and spin-1 mediation is discussed, and also realizations where the Higgs particle provides a portal between the dark and visible sectors. The guiding principles underpinning the proposed simplified models are spelled out, and some suggestions for implementation are presented.
△ Less
Submitted 23 March, 2016; v1 submitted 9 June, 2015;
originally announced June 2015.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
LArIAT: Liquid Argon In A Testbeam
Authors:
J. Paley,
D. Gastler,
E. Kearns,
R. Linehan,
R. Patterson,
W. Foremen,
J. Ho,
D. Schmitz,
R. Johnson,
J. St. John,
R. Acciarri,
P. Adamson,
M. Backfish,
W. Badgett,
B. Baller,
A. Hahn,
D. Jensen,
T. Junk,
M. Kirby,
T. Kobilarcik,
P. Kryczynski,
H. Lippincott,
A. Marchionni,
K. Nishikawa,
J. Raaf
, et al. (42 additional authors not shown)
Abstract:
Liquid Argon Time Projection Chambers (LArTPCs) are ideal detectors for precision neutrino physics. These detectors, when located deep underground, can also be used for measurements of proton decay, and astrophysical neutrinos. The technology must be completely developed, up to very large mass scales, and fully mastered to construct and operate these detectors for this physics program. As part of…
▽ More
Liquid Argon Time Projection Chambers (LArTPCs) are ideal detectors for precision neutrino physics. These detectors, when located deep underground, can also be used for measurements of proton decay, and astrophysical neutrinos. The technology must be completely developed, up to very large mass scales, and fully mastered to construct and operate these detectors for this physics program. As part of an integrated plan of developing these detectors, accurate measurements in LArTPC of known particle species in the relevant energy ranges are now deemed as necessary. The LArIAT program aims to directly achieve these goals by deploying LArTPC detectors in a dedicated calibration test beam line at Fermilab. The set of measurements envisaged here are significant for both the short-baseline (SBN) and long-baseline (LBN) neutrino oscillation programs in the US, starting with MicroBooNE in the near term and with the adjoint near and far liquid argon detectors in the Booster beam line at Fermilab envisioned in the mid-term, and moving towards deep underground physics such as with the long-baseline neutrino facility (LBNF) in the longer term.
△ Less
Submitted 27 June, 2014; v1 submitted 20 June, 2014;
originally announced June 2014.
-
Search for a Standard Model Higgs Boson in CMS via Vector Boson Fusion in the H->WW->lνlνChannel
Authors:
E. Yazgan,
J. Damgov,
N. Akchurin,
V. Genchev,
D. Green,
S. Kunori,
M. Schmitt,
W. Wu,
M. T. Zeyrek
Abstract:
We present the potential for discovering the Standard Model Higgs boson produced by the vector-boson fusion mechanism. We considered the decay of Higgs bosons into the W+W- final state, with both W-bosons subsequently decaying leptonically. The main background is ttbar with one or more jets produced. This study is based on a full simulation of the CMS detector, and up-to-date reconstruction code…
▽ More
We present the potential for discovering the Standard Model Higgs boson produced by the vector-boson fusion mechanism. We considered the decay of Higgs bosons into the W+W- final state, with both W-bosons subsequently decaying leptonically. The main background is ttbar with one or more jets produced. This study is based on a full simulation of the CMS detector, and up-to-date reconstruction codes. The result is that a signal of 5 sigma significance can be obtained with an integrated luminosity of 12-72 1/fb for Higgs boson masses between 130-200 GeV. In addition, the major background can be measured directly to 7% from the data with an integrated luminosity of 30 1/fb. In this study, we also suggested a method to obtain information in Higgs mass using the transverse mass distributions.
△ Less
Submitted 13 June, 2007;
originally announced June 2007.
-
Studies of the Response of the Prototype CMS Hadron Calorimeter, Including Magnetic Field Effects, to Pion, Electron, and Muon Beams
Authors:
V. V. Abramov,
B. S. Acharya,
N. Akchurin,
I. Atanasov,
G. Baiatian,
A. Ball,
S. Banerjee,
P. de Barbaro,
V. Barnes,
G. Bencze,
A. Bodek,
M. Booke,
H. Budd,
L. Cremaldi,
P. Cushman,
S. R. Dugad,
L. Dimitrov,
A. Dyshkant,
J. Elias,
V. N. Evdokimov,
D. Fong,
J. Freeman,
V. Genchev,
P. I. Goncharov,
D. Green
, et al. (10 additional authors not shown)
Abstract:
We report on the response of a prototype CMS hadron calorimeter module to charged particle beams of pions, muons, and electrons with momenta up to 375 GeV/c. The data were taken at the H2 and H4 beamlines at CERN in 1995 and 1996. The prototype sampling calorimeter used copper absorber plates and scintillator tiles with wavelength shifting fibers for readout. The effects of a magnetic field of u…
▽ More
We report on the response of a prototype CMS hadron calorimeter module to charged particle beams of pions, muons, and electrons with momenta up to 375 GeV/c. The data were taken at the H2 and H4 beamlines at CERN in 1995 and 1996. The prototype sampling calorimeter used copper absorber plates and scintillator tiles with wavelength shifting fibers for readout. The effects of a magnetic field of up to 3 Tesla on the response of the calorimeter to muons, electrons, and pions are presented, and the effects of an upstream lead tungstate crystal electromagnetic calorimeter on the linearity and energy resolution of the combined calorimetric system to hadrons are evaluated. The results are compared with Monte Carlo simulations and are used to optimize the choice of total absorber depth, sampling frequency, and longitudinal readout segmentation.
△ Less
Submitted 21 July, 2000;
originally announced July 2000.
-
Top Quark Physics
Authors:
M. Beneke,
I. Efthymiopoulos,
M. L. Mangano,
J. Womersley,
A. Ahmadov,
G. Azuelos,
U. Baur,
A. Belyaev,
E. L. Berger,
W. Bernreuther,
E. E. Boos,
M. Bosman,
A. Brandenburg,
R. Brock,
M. Buice,
N. Cartiglia,
F. Cerutti,
A. Cheplakov,
L. Chikovani,
M. Cobal-Grassmann,
G. Corcella,
F. del Aguila,
T. Djobava,
J. Dodd,
V. Drollinger
, et al. (53 additional authors not shown)
Abstract:
We review the prospects for studies of the top quark at the LHC.
We review the prospects for studies of the top quark at the LHC.
△ Less
Submitted 4 March, 2000;
originally announced March 2000.
-
Discovery potential for supersymmetry in CMS
Authors:
S. Abdullin,
Z. Antunovich,
F. Charles,
D. Denegri,
U. Dydak,
M. Dzelalija,
V. Genchev,
D. Graham,
I. Iashvili,
A. Kharchilava,
R. Kinnunen,
S. Kunori,
K. Mazumdar,
C. Racca,
L. Rurua,
N. Stepanov,
J. Womersley
Abstract:
This work summarizes and puts in an overall perspective studies done within CMS concerning the discovery potential for squarks and gluinos, sleptons, charginos and neutralinos, SUSY dark matter, lightest Higgs, sparticle mass determination methods and the detector design optimisation in view of SUSY searches. It represents the status of our understanding of these subjects as of Summer 1997.
As…
▽ More
This work summarizes and puts in an overall perspective studies done within CMS concerning the discovery potential for squarks and gluinos, sleptons, charginos and neutralinos, SUSY dark matter, lightest Higgs, sparticle mass determination methods and the detector design optimisation in view of SUSY searches. It represents the status of our understanding of these subjects as of Summer 1997.
As a benchmark model we used the minimal supergravity-inspired super- symmetric standard model (mSUGRA) with a stable LSP. Discovery of SUSY at the LHC should be relatively straightforward. It may occur through the observation of a large excesses of events in missing E_T + jets, or with one or more isolated leptons. An excess of trilepton events or of isolated dileptons with E_T^miss, exhibiting a characteristic signature in the l^+l^- invariant mass distribution could also be the first manifestation of SUSY production. Squark and gluino production may represent a copious source of Higgs bosons through cascade decays. The lightest SUSY Higgs h->bbbar may be reconstructed with a signal/background ratio of order 1. The lightest supersymmetric particle of SUSY models with conserved R-parity represents a very good candidate for the cosmological dark matter. The region of parameter space where this is true is well-covered by our searches, at least for tan(beta)=2.
If supersymmetry exists at electroweak scale it could hardly escape detection in CMS, and the study of supersymmetry will form a central part of our physics program.
△ Less
Submitted 15 June, 1998;
originally announced June 1998.