-
Biorealistic Response in Optoelectrically-Driven Flexible Halide-Perovskite Single-Crystal Memristors
Authors:
Ivan Matchenya,
Anton Khanas,
Roman Podgornyi,
Daniil Shirkin,
Nikita Sizykh,
Sergey Anoshkin,
Dmitry V. Krasnikov,
Alexei Yulin,
Alexey Zhukov,
Albert G. Nasibulin,
Ivan Scheblykin,
Anatoly Pushkarev,
Andrey Zenkevich,
Alexandr Marunchenko
Abstract:
The transition to smart wearable and flexible optoelectronic devices communicating with each other and performing neuromorphic computing at the edge is a big goal in next-generation optoelectronics. These devices should perform their regular tasks supported by energy-efficient in-memory calculations. Here, we study the response of the CsPbBr$_3$ halide-perovskite single crystal fabricated on the f…
▽ More
The transition to smart wearable and flexible optoelectronic devices communicating with each other and performing neuromorphic computing at the edge is a big goal in next-generation optoelectronics. These devices should perform their regular tasks supported by energy-efficient in-memory calculations. Here, we study the response of the CsPbBr$_3$ halide-perovskite single crystal fabricated on the flexible polymer substrate and integrated with the single-walled carbon nanotube thin film electrodes in a lateral geometry. We show both photodetection functions combined with the synaptic functionality in our device under the application of hybrid optoelectrical stimuli. Furthermore, we demonstrate that our device exhibits frequency-dependent bidirectional modification of synaptic weight with a sliding threshold similar to biologically plausible Bienenstock-Cooper-Munro learning. The demonstrated optoelectronic synaptic behavior in halide-perovskite single-crystals opens the opportunity for the development of hybrid organic-inorganic artificial visual systems.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Atomistic mechanism of friction force independence on the normal load and other friction laws for dynamic structural superlubricity
Authors:
Nikolay V. Brilliantov,
Alexey A. Tsukanov,
Artem K. Grebenko,
Albert G. Nasibulin,
Igor A. Ostanin
Abstract:
We explore dynamic structural superlubricity for the case of a relatively large contact area, where the friction force is proportional to the area (exceeding $\sim 100\,nm^2$) experimentally, numerically, and theoretically. We use a setup comprised of two molecular smooth incommensurate surfaces -- graphene-covered tip and substrate. The experiments and MD simulations demonstrate independence of t…
▽ More
We explore dynamic structural superlubricity for the case of a relatively large contact area, where the friction force is proportional to the area (exceeding $\sim 100\,nm^2$) experimentally, numerically, and theoretically. We use a setup comprised of two molecular smooth incommensurate surfaces -- graphene-covered tip and substrate. The experiments and MD simulations demonstrate independence of the friction force on the normal load, for a wide range of normal loads and relative surface velocities. We propose an atomistic mechanism of this phenomenon, associated with synchronic out-of-plane surface fluctuations of thermal origin, and confirm it by numerical experiments. Based on this mechanism, we develop a theory for this type of superlubricity and show that friction force increases linearly with increasing temperature and relative velocity, for velocities, larger than a threshold velocity. The MD results are in a fair agreement with predictions of the theory.
△ Less
Submitted 18 November, 2023;
originally announced November 2023.
-
Inverted loss engineering in functional material covered waveguides
Authors:
Ayvaz I. Davletkhanov,
Aram A. Mkrtchyan,
Dmitry A. Chermoshentsev,
Mikhail V. Shashkov,
Daniil A. Ilatovskii,
Dmitry V. Krasnikov,
Albert G. Nasibulin,
Yuriy G. Gladush
Abstract:
Optical waveguides, covered with thin films, which transmittance can be controlled by external action, are widely used in various applications from optical modulators to saturable absorbers. It is natural to suggest that the waveguide losses will be proportional to the covering material absorption. We demonstrate that under certain conditions this simple assumption fails. Instead, we observe the r…
▽ More
Optical waveguides, covered with thin films, which transmittance can be controlled by external action, are widely used in various applications from optical modulators to saturable absorbers. It is natural to suggest that the waveguide losses will be proportional to the covering material absorption. We demonstrate that under certain conditions this simple assumption fails. Instead, we observe the reduction of the film material absorption can lead to an increase in the waveguide propagation losses. For this, we use a side polished fiber covered with a single-walled carbon nanotube thin film whose absorption is attenuated either due to saturable absorption or electrochemical gating. For the films thicker than 50 nm, we observe saturable absorption to turn into light induced absorption with nonmonotonic dependence on the incident power. With a numerical simulation and analytical approach, we identify that this nontrivial behavior comes from mode reshaping and predict required parameters for its observation.
△ Less
Submitted 25 March, 2023;
originally announced March 2023.
-
Nd-Doped Polarization Maintaining All-Fiber Laser With Dissipative Soliton Resonance Mode-Locking at 905 nm
Authors:
Aram A. Mkrtchyan,
Yuriy G. Gladush,
Mikhail A. Melkumov,
Aleksandr M. Khegai,
Kirill A. Sitnik,
Pavlos G. Lagoudakis,
Albert G. Nasibulin
Abstract:
Moving the fiber laser emission to the region below one micron may provide a cheaper, more compact and robust alternatives to the existing solid state lasers. Here, for the first time we report a neodymium mode-locked fiber laser emitting at 905 nm in the all-fiber polarization maintaining configuration. We obtain a self-starting pulse generation in nonlinear amplifying loop mirror (NALM) cavity c…
▽ More
Moving the fiber laser emission to the region below one micron may provide a cheaper, more compact and robust alternatives to the existing solid state lasers. Here, for the first time we report a neodymium mode-locked fiber laser emitting at 905 nm in the all-fiber polarization maintaining configuration. We obtain a self-starting pulse generation in nonlinear amplifying loop mirror (NALM) cavity configuration. To suppress a dominant emission at 1064 nm corresponding to a 4-level laser scheme, we use an active fiber - 920/1064 division multiplexer - active fiber sandwich-like sequence in the NALM loop. A rectangular shape dissipative soliton had nJ energy, 30 pm spectral width and 80 - 430 ps width linearly depending on the pump power. Excellent agreement with numerical simulation allowed us to recover pulse shape and width for the pulses out of autocorrelation window.
△ Less
Submitted 13 January, 2023;
originally announced January 2023.
-
Dispersion Managed Mode-locking in all-fiber Polarization-maintaining Nd-doped Laser at 920 nm
Authors:
Aram A. Mkrtchyan,
Mikhail. S. Mishevsky,
Yuriy G. Gladush,
Mikhail A. Melkumov,
Aleksandr M. Khegai,
Pavlos G. Lagoudakis,
Albert G. Nasibulin
Abstract:
We present a comprehensive study of dispersion managed ultrashort-pulse generation in Nd-doped polarization maintaining all-fiber laser at a 920 nm wavelength. We implement a linear laser scheme with a chirped fiber Bragg grating (CFBG) serving as a semitransparent mirror and semiconductor saturable absorber mirror (SESAM) as a mode-locker and as a second non-transparent mirror. Complete 1064 nm e…
▽ More
We present a comprehensive study of dispersion managed ultrashort-pulse generation in Nd-doped polarization maintaining all-fiber laser at a 920 nm wavelength. We implement a linear laser scheme with a chirped fiber Bragg grating (CFBG) serving as a semitransparent mirror and semiconductor saturable absorber mirror (SESAM) as a mode-locker and as a second non-transparent mirror. Complete 1064 nm emission filtering is ensured by 920/1064 wavelength division multiplexer. The dispersion compensation by CFBG was sufficient to reach anomalous net dispersion in the shortest laser scheme allowing us to investigate mode-locking regimes in the -0.05 ps 2 - 0.24 ps 2 net dispersion range by varying the length of the passive fiber. With this approach we demonstrate high order harmonic mode-locking at dispersion closer to zero and large energy span near-parabolic shape single pulse operation in anomalous dispersion regime. The investigation is supported by numerical simulations used to optimize the laser resonator design and to investigate intracavity pulse evolution.
△ Less
Submitted 13 January, 2023;
originally announced January 2023.
-
Ultrafast opto-mechanical terahertz modulators based on stretchable carbon nanotube thin films
Authors:
Maksim I. Paukov,
Vladimir V. Starchenko,
Dmitry V. Krasnikov,
Gennady A. Komandin,
Yuriy G. Gladush,
Sergey S. Zhukov,
Boris P. Gorshunov,
Albert G. Nasibulin,
Aleksey V. Arsenin,
Valentyn S. Volkov,
Maria G. Burdanova
Abstract:
For terahertz (THz) wave applications, tunable and rapid modulation is highly required. When studied by means of optical pump-terahertz probe spectroscopy, single-walled carbon nanotubes (SWCNTs) thin films demonstrated ultrafast carrier recombination lifetimes with a high relative change in the signal under optical excitation, making them promising candidates for high-speed modulators. Here, comb…
▽ More
For terahertz (THz) wave applications, tunable and rapid modulation is highly required. When studied by means of optical pump-terahertz probe spectroscopy, single-walled carbon nanotubes (SWCNTs) thin films demonstrated ultrafast carrier recombination lifetimes with a high relative change in the signal under optical excitation, making them promising candidates for high-speed modulators. Here, combination of SWCNTthin films and stretchable substrates facilitated studies of the SWCNT mechanical properties under strain,and enabled the development of a new type of an opto-mechanical modulator. By applying a certain strain to the SWCNT films, the effective sheet conductance and therefore modulation depth can be fine-tuned to optimize the designed modulator. Modulators exhibited a photoconductivity change of 3-4 orders of magnitude under the strain due to the structural modification in the SWCNT network. Stretching was used to control the THz signal with a modulation depth of around 100 % without strain and 65 % at a high strainoperation of 40 %. The sensitivity of modulators to beam polarisation is also shown, which might also come in handy for the design of a stretchable polariser. Our results give a fundamental grounding for the design of high-sensitivity stretchable devices based on SWCNT films.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Halide Perovskite Light Emitting Photodetector
Authors:
A. A. Marunchenko,
V. I. Kondratiev,
A. P. Pushkarev,
S. A. Khubezhov,
M. A. Baranov,
A. G. Nasibulin,
S. V. Makarov
Abstract:
Light emission and detection are the two fundamental attributes of optoelectronic communication systems. Until now, both functions have been demonstrated using the p-n diode which is exploited across a wide range of applications. However, due to the competing dynamics of carrier injection and photocarrier collection, with this device light emission and detection are realized separately by switchin…
▽ More
Light emission and detection are the two fundamental attributes of optoelectronic communication systems. Until now, both functions have been demonstrated using the p-n diode which is exploited across a wide range of applications. However, due to the competing dynamics of carrier injection and photocarrier collection, with this device light emission and detection are realized separately by switching the direction of the applied electrical bias. Here we use mobile ions in halide perovskites to demonstrate light-emitting photodetection in either condition of applied electrical bias. Our device consists of a CsPbBr$_3$ microwire which is integrated with single-walled carbon nanotube thin film electrodes. The dual functionality stems from the modulation of an energetic barrier caused by the cooperative action of mobile ions with the photogenerated charge carriers at the perovskite-electrode interface. Furthermore, such complex charge dynamics also result in a novel effect: light-enhanced electroluminescence. The observed new optoelectronic phenomena in our simple lateral device design will expand the applications for mixed ionic-electronic conductors in multifunctional optoelectronic devices .
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
Local ultra-densification of single-walled carbon nanotube films: modeling and experiment
Authors:
Artem K. Grebenko,
Grigorii Drozdov,
Yuriy G. Gladush,
Igor Ostanin,
Sergey S. Zhukov,
Aleksandr V. Melentyev,
Eldar M. Khabushev,
Alexey P. Tsapenko,
Dmitry V. Krasnikov,
Boris Afinogenov,
Alexei G. Temiryazev,
Viacheslav V. Dremov,
Traian Dumitricã,
Mengjun Li,
Hussein Hijazi,
Vitaly Podzorov,
Leonard C. Feldman,
Albert G. Nasibulin
Abstract:
Fabrication of nanostructured metasurfaces poses a significant technological and fundamental challenge. Despite developing novel systems that support reversible elongation and distortion, their nanoscale patterning and control of optical properties remain an open problem. Herein we report the atomic force microscope lithography (AFML) application for nanoscale patterning of single-walled carbon na…
▽ More
Fabrication of nanostructured metasurfaces poses a significant technological and fundamental challenge. Despite developing novel systems that support reversible elongation and distortion, their nanoscale patterning and control of optical properties remain an open problem. Herein we report the atomic force microscope lithography (AFML) application for nanoscale patterning of single-walled carbon nanotube films and the associated reflection coefficient tuning. We present models of bundling reorganization, formed-pattern stability, and energy distribution describing mechanical behavior with mesoscopic distinct element method (MDEM). All observed and calculated phenomena support each other and present a platform for developing AFML patterned optical devices using meshy nanostructured matter.
△ Less
Submitted 12 March, 2022;
originally announced March 2022.
-
Gentle patterning approaches towards compatibility with bio-organic materials and their environmental aspects
Authors:
Artem K. Grebenko,
Konstantin A. Motovilov,
Anton V. Bubis,
Albert G. Nasibulin
Abstract:
Advances in material science, bio-electronic, and implantable medicine combined with recent requests for eco-friendly materials and technologies inevitably formulate new challenges for nano- and micro-patterning techniques. Overall, the importance of creating micro and nanostructures is motivated by a large manifold of fundamental and applied properties accessible only at the nanoscale. Lithograph…
▽ More
Advances in material science, bio-electronic, and implantable medicine combined with recent requests for eco-friendly materials and technologies inevitably formulate new challenges for nano- and micro-patterning techniques. Overall, the importance of creating micro and nanostructures is motivated by a large manifold of fundamental and applied properties accessible only at the nanoscale. Lithography is a crucial family of fabrication methods to create prototypes and produce devices on an industrial scale. The pure trend in the miniaturization of critical electronic semiconducting components is recently enhanced by implementing bio-organic systems in electronics. So far, significant efforts have been made to find novel lithographic approaches and develop old ones to reach compatibility with delicate bio-organic systems and minimize the impact on the environment. Herein, we briefly review such delicate materials and sophisticated patterning techniques.
△ Less
Submitted 17 February, 2022;
originally announced February 2022.
-
Localization of the Helical Edge States in the Absense of External Magnetic Field
Authors:
A. V. Bubis,
N. N. Mikhailov,
S. A. Dvoretsky,
A. G. Nasibulin,
E. S. Tikhonov
Abstract:
Theoretically, the helical edge states of two-dimensional topological insulators are protected from coherent backscattering due to nonmagnetic disorder provided electron interactions are not too strong. Experimentally, the edges typically do not demonstrate the systematic and robust quantization, at the same time little is known about the sub-Kelvin temperature behavior. Here, we report the surpri…
▽ More
Theoretically, the helical edge states of two-dimensional topological insulators are protected from coherent backscattering due to nonmagnetic disorder provided electron interactions are not too strong. Experimentally, the edges typically do not demonstrate the systematic and robust quantization, at the same time little is known about the sub-Kelvin temperature behavior. Here, we report the surprising localization of the edge states in an 8 nm HgTe quantum well in zero magnetic field at millikelvin temperatures. Additionally, the magnetoresistance data at 0.5 K for the edges few micrometers long suggests the field-dependent localization length $l_B\propto B^{-α}$, with $α$ ranging approximately from $1.6$ to $2.8$ at fields $B\lesssim0.1\,\text{T}$ and $α\approx1.1$ at higher fields up to $0.5\,\text{T}$. In the frame of disordered interacting edge, these values of $α$ correspond to the Luttinger liquid parameters $K\approx 0.9-1.1$ and $K\approx 0.6$, respectively. We discuss possible scenarios which could result in the zero magnetic field localization.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
Highly Efficient Bilateral Doping of Single-Walled Carbon Nanotubes
Authors:
Anastasia E. Goldt,
Orysia T. Zaremba,
Mikhail O. Bulavskiy,
Fedor S. Fedorov,
Konstantin V. Larionov,
Alexey P. Tsapenko,
Zakhar I. Popov,
Pavel Sorokin,
Anton S. Anisimov,
Heena Inani,
Jani Kotakoski,
Kimmo Mustonen,
Albert G. Nasibulin
Abstract:
A boost in the development of flexible and wearable electronics facilitates the design of new materials to be applied as transparent conducting films (TCFs). Although single-walled carbon nanotube (SWCNT) films are the most promising candidates for flexible TCFs, they still do not meet optoelectronic requirements demanded their successful industrial integration. In this study, we proposed and thor…
▽ More
A boost in the development of flexible and wearable electronics facilitates the design of new materials to be applied as transparent conducting films (TCFs). Although single-walled carbon nanotube (SWCNT) films are the most promising candidates for flexible TCFs, they still do not meet optoelectronic requirements demanded their successful industrial integration. In this study, we proposed and thoroughly investigated a new approach that comprises simultaneous bilateral (outer and inner surfaces) SWCNT doping after their opening by thermal treatment at 400 C under an ambient air atmosphere. Doping by a chloroauric acid (HAuCl$_{4}$) ethanol solution allowed us to achieve the record value of sheet resistance of 31 $\pm$ 4 $Ω$/sq at a transmittance of 90% in the middle of visible spectra (550 nm). The strong p-doping was examined by open-circuit potential (OCP) measurements and confirmed by ab initio calculations demonstrating a downshift of Fermi level around 1 eV for the case of bilateral doping.
△ Less
Submitted 1 April, 2021;
originally announced April 2021.
-
Thermal conductance and non-equilibrium superconductivity in a diffusive NSN wire probed by shot noise
Authors:
A. V. Bubis,
E. V. Shpagina,
A. G. Nasibulin,
V. S. Khrapai
Abstract:
We investigate diffusive nanowire-based structures with two normal terminals on the sides and a central superconducting island in the middle, which is either grounded or floating. Using a semiclassical calculation we demonstrate that both device layouts permit a quantitative measurement of the energy-dependent sub-gap thermal conductance $G_\mathrm{th}$ from the spectral density of the current noi…
▽ More
We investigate diffusive nanowire-based structures with two normal terminals on the sides and a central superconducting island in the middle, which is either grounded or floating. Using a semiclassical calculation we demonstrate that both device layouts permit a quantitative measurement of the energy-dependent sub-gap thermal conductance $G_\mathrm{th}$ from the spectral density of the current noise. In the floating case this goal is achieved without the need to contact the superconductor provided the device is asymmetric, that may be attractive from the experimental point of view. In addition, we observe that the shot noise in the floating case is sensitive to a well-known effect of non-equilibrium suppression and bistability of the superconducting gap. Our calculations are directly applicable to the multi-mode case and can serve as a starting point to understand the shot noise response in open one dimensional Majorana device.
△ Less
Submitted 25 August, 2021; v1 submitted 22 February, 2021;
originally announced February 2021.
-
Charge-neutral nonlocal response in superconductor-InAs nanowire hybrid devices
Authors:
A. O. Denisov,
A. V. Bubis,
S. U. Piatrusha,
N. A. Titova,
A. G. Nasibulin,
J. Becker,
J. Treu,
D. Ruhstorfer,
G. Koblmueller,
E. S. Tikhonov,
V. S. Khrapai
Abstract:
Nonlocal quasiparticle transport in normal-superconductor-normal (NSN) hybrid structures probes sub-gap states in the proximity region and is especially attractive in the context of Majorana research. Conductance measurement provides only partial information about nonlocal response composed from both electron-like and hole-like quasiparticle excitations. In this work, we show how a nonlocal shot n…
▽ More
Nonlocal quasiparticle transport in normal-superconductor-normal (NSN) hybrid structures probes sub-gap states in the proximity region and is especially attractive in the context of Majorana research. Conductance measurement provides only partial information about nonlocal response composed from both electron-like and hole-like quasiparticle excitations. In this work, we show how a nonlocal shot noise measurement delivers a missing puzzle piece in NSN InAs nanowire-based devices. We demonstrate that in a trivial superconducting phase quasiparticle response is practically charge-neutral, dominated by the heat transport component with a thermal conductance being on the order of conductance quantum. This is qualitatively explained by numerous Andreev reflections of a diffusing quasiparticle, that makes its charge completely uncertain. Consistently, strong fluctuations and sign reversal are observed in the sub-gap nonlocal conductance, including occasional Andreev rectification signals. Our results prove conductance and noise as complementary measurements to characterize quasiparticle transport in superconducting proximity devices.
△ Less
Submitted 2 August, 2021; v1 submitted 6 January, 2021;
originally announced January 2021.
-
Densification of Single-Walled Carbon Nanotube Films: Mesoscopic Distinct Element Method Simulations and Experimental Validation
Authors:
Grigorii Drozdov,
Igor Ostanin,
Hao Xu,
Yuezhou Wang,
Traian Dumitrică,
Artem Grebenko,
Alexey P. Tsapenko,
Yuriy Gladush,
Georgy Ermolaev,
Valentyn S. Volkov,
Sebastian Eibl,
Ulrich Rüde,
Albert G. Nasibulin
Abstract:
Nanometer thin single-walled carbon nanotube (CNT) films collected from the aerosol chemical deposition reactors have gathered attention for their promising applications. Densification of these pristine films provides an important way to manipulate the mechanical, electronic, and optical properties. To elucidate the underlying microstructural level restructuring, which is ultimately responsible fo…
▽ More
Nanometer thin single-walled carbon nanotube (CNT) films collected from the aerosol chemical deposition reactors have gathered attention for their promising applications. Densification of these pristine films provides an important way to manipulate the mechanical, electronic, and optical properties. To elucidate the underlying microstructural level restructuring, which is ultimately responsible for the change in properties, we perform large scale vector-based mesoscopic distinct element method simulations in conjunction with electron microscopy and spectroscopic ellipsometry characterization of pristine and densified films by drop-cast volatile liquid processing. Matching the microscopy observations, pristine CNT films with finite thickness are modeled as self-assembled CNT networks comprising entangled dendritic bundles with branches extending down to individual CNTs. Simulations of the film under uniaxial compression uncover an ultra-soft densification regime extending to a ~75% strain, which is likely accessible with the surface tensional forces arising from liquid surface tension during the evaporation. When removing the loads, the pre-compressed samples evolve into homogeneously densified films with thickness values depending on both the pre-compression level and the sample microstructure. The significant reduction in thickness, confirmed by our spectroscopic ellipsometry, is attributed to the underlying structural changes occurring at the 100 nm scale, including the zipping of the thinnest dendritic branches.
△ Less
Submitted 29 August, 2020;
originally announced August 2020.
-
Heat-mode excitation in a proximity superconductor
Authors:
A. O. Denisov,
A. V. Bubis,
S. U. Piatrusha,
N. A. Titova,
A. G. Nasibulin,
J. Becker,
J. Treu,
D. Ruhstorfer,
G. Koblmueller,
E. S. Tikhonov,
V. S. Khrapai
Abstract:
Mesoscopic superconductivity deals with various quasiparticle excitation modes, only one of them -- the charge-mode -- being directly accessible for conductance measurements due to the imbalance in populations of quasi-electron and quasihole excitation branches. Other modes carrying heat or even spin, valley etc. currents populate the branches equally and are charge-neutral, which makes them much…
▽ More
Mesoscopic superconductivity deals with various quasiparticle excitation modes, only one of them -- the charge-mode -- being directly accessible for conductance measurements due to the imbalance in populations of quasi-electron and quasihole excitation branches. Other modes carrying heat or even spin, valley etc. currents populate the branches equally and are charge-neutral, which makes them much harder to control. This noticeable gap in the experimental studies of mesoscopic non-equilibrium superconductivity can be filled by going beyond the conventional DC transport measurements and exploiting spontaneous current fluctuations. Here, we perform such an experiment and investigate the transport of heat in an open hybrid device based on a superconductor proximitized InAs nanowire. Using shot noise measurements, we investigate sub-gap Andreev heat guiding along the superconducting interface and fully characterize it in terms of the thermal conductance on the order of $G_\mathrm{th}\sim e^2/h$, tunable by a back gate voltage. Understanding of the heat-mode also uncovers its implicit signatures in the non-local charge transport. Our experiments open a direct pathway to probe generic charge-neutral excitations in superconducting hybrids.
△ Less
Submitted 25 April, 2022; v1 submitted 17 June, 2020;
originally announced June 2020.
-
Raman spectroscopy of GaSe and InSe post-transition metal chalcogenides layers
Authors:
Maciej R. Molas,
Anastasia V. Tyurnina,
Viktor Zólyomi,
Anna K. Ott,
Daniel J. Terry,
Matthew J. Hamer,
Celal Yelgel,
Adam Babiński,
Albert G. Nasibulin,
Andrea C. Ferrari,
Vladimir I. Fal'ko,
Roman Gorbachev
Abstract:
III-VI post-transition metal chalcogenides (InSe and GaSe) are a new class of layered semiconductors, which feature a strong variation of size and type of their band gaps as a function of number of layers (N). Here, we investigate exfoliated layers of InSe and GaSe ranging from bulk crystals down to monolayer, encapsulated in hexagonal boron nitride, using Raman spectroscopy. We present the N-depe…
▽ More
III-VI post-transition metal chalcogenides (InSe and GaSe) are a new class of layered semiconductors, which feature a strong variation of size and type of their band gaps as a function of number of layers (N). Here, we investigate exfoliated layers of InSe and GaSe ranging from bulk crystals down to monolayer, encapsulated in hexagonal boron nitride, using Raman spectroscopy. We present the N-dependence of both intralayer vibrations within each atomic layer, as well as of the interlayer shear and layer breathing modes. A linear chain model can be used to describe the evolution of the peak positions as a function of N, consistent with first principles calculations.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
Ionically gated perovskite solar cell with tunable carbon nanotube interface at thick fullerene electron transporting layer: comparison to gated OPV
Authors:
D. S. Saranin,
D. S. Muratov,
R. Haroldson,
A. G. Nasibulin,
A. R. Ishteev,
D. V. Kuznetsov,
M. N. Orlova,
S. I. Didenko,
A. A. Zakhidov
Abstract:
We demonstrate an ionically gated planar PS-PV solar cell with ultra-thick fullerene ETL with a porous CNT electron collector on top of it. Perovskite photovoltaic devices usually have undoped electron transport layers, usually thin like C60 due to its high resistance. Metallic low work function cathodes are extremely unstable in PS-PV due to reaction with halogens I-/Br-, and it would be desirabl…
▽ More
We demonstrate an ionically gated planar PS-PV solar cell with ultra-thick fullerene ETL with a porous CNT electron collector on top of it. Perovskite photovoltaic devices usually have undoped electron transport layers, usually thin like C60 due to its high resistance. Metallic low work function cathodes are extremely unstable in PS-PV due to reaction with halogens I-/Br-, and it would be desirable to have stable carbon cathodes on top of thick low resistance ETL for enhancing the stability of PS-PVs. We show that gating such top CNT cathode in ionic liquid, as part of a supercapacitor charged by Vg tunes the Fermi level of CNT by EDL charging, and causes lowering of a barrier at of C60/C70 ETL. Moreover, at higher gating voltage ions further propagates into fullerene by electrochemical n-doping, which increases dramatically PV performance by raising mostly two parameters: Isc and FF, resulting in PCE efficiency raised from 3 % to 11 %. N-doping of ETL strongly enhances charge collection by ETL and CNT raising Isc and lowering series resistance and thus increasing strongly PCE. Surprisingly Voc is not sensitive in PS-PV to external Vg gating, on the contrary, to strongly enhanced Voc in ionically gated organic PV, where it is the main gating effect. This insensitivity of Voc to lowering of the work function of Vg gated CNT electrode is a clear indication that Voc in PS-PV is determined by inner p-i-n junction formation in PS itself, via accumulation of its intrinsic mobile ionic species halogens and cations and their vacancies.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Modified silicone rubbers for fabrication and contacting of flexible suspended membranes of n-/p-GaP nanowires with single-walled carbon nanotube transparent contact
Authors:
Vladimir Neplokh,
Fedor M. Kochetkov,
Konstantin V. Deriabin,
Vladimir V. Fedorov,
Alexey D. Bolshakov,
Igor E. Eliseev,
Vladimir Yu. Mikhailovskii,
Daniil A. Ilatovskii,
Dmitry V. Krasnikov,
Maria Tchernycheva,
George E. Cirlin,
Albert G. Nasibulin,
Ivan S. Mukhin,
Regina M. Islamova
Abstract:
This work proposes new chemical and mechanical materials and techniques for III-V semiconductor NW/silicone membrane formation and optoelectronic device fabrication. Molecular beam epitaxy (MBE)-synthesized n-, p- and i-GaP NWs were encapsulated by introduced G-coating method into synthesized polydimethylsiloxane-graft-polystyrene and released from the Si growth substrate. The fabricated membranes…
▽ More
This work proposes new chemical and mechanical materials and techniques for III-V semiconductor NW/silicone membrane formation and optoelectronic device fabrication. Molecular beam epitaxy (MBE)-synthesized n-, p- and i-GaP NWs were encapsulated by introduced G-coating method into synthesized polydimethylsiloxane-graft-polystyrene and released from the Si growth substrate. The fabricated membranes were contacted with different materials including single-walled carbon nanotubes or ferrocenyl-containing polymethylhydrosiloxane with and without multi-walled carbon nanotubes doping. The electrical connection of the fabricated membranes was verified by electron beam induced current (EBIC) spectroscopy. The developed methods and materials can be applied for fabrication of high quality flexible inorganic optoelectronic devices.
△ Less
Submitted 29 October, 2019;
originally announced October 2019.
-
Intersubband plasmon excitations in doped carbon nanotubes
Authors:
Daria Satco,
Ahmad R. T. Nugraha,
M. Shoufie Ukhtary,
Daria Kopylova,
Albert G. Nasibulin,
Riichiro Saito
Abstract:
We theoretically investigate intersubband plasmon excitations in doped single wall carbon nanotubes (SWNTs) by examining the dependence of plasmon frequency on the nanotube diameter, chirality, and Fermi energy. The intersubband plasmons can be excited by light with polarization perpendicular to the nanotube axis and thus the plasmon excitations corresponds to optical transitions between the two d…
▽ More
We theoretically investigate intersubband plasmon excitations in doped single wall carbon nanotubes (SWNTs) by examining the dependence of plasmon frequency on the nanotube diameter, chirality, and Fermi energy. The intersubband plasmons can be excited by light with polarization perpendicular to the nanotube axis and thus the plasmon excitations corresponds to optical transitions between the two different subbands, which are sensitive to the Fermi energy. In every SWNT, this mechanism leads to the emergence of the optical absorption peak at the plasmon frequency for a given Fermi energy, $E_F$. The plasmon frequencies calculated for many SWNTs with diameter $d_t < 2$ nm exhibit a dependence on $(1/d_t)^{0.7}$ and the frequencies are further affected by Fermi energy as $E_F^{0.25}$. With this knowledge, it is possible to develop a map of intersubband plasmon excitations in doped SWNTs that could be useful to quickly estimate the doping level and also be an alternative way to characterize nanotube chirality.
△ Less
Submitted 7 February, 2019; v1 submitted 28 November, 2018;
originally announced November 2018.
-
Noise insights into electronic transport
Authors:
S. U. Piatrusha,
L. V. Ginzburg,
E. S. Tikhonov,
D. V. Shovkun,
G. Koblmueller,
A. V. Bubis,
A. K. Grebenko,
A. G. Nasibulin,
V. S. Khrapai
Abstract:
Typical experimental measurement is set up as a study of the system's response to a stationary external excitation. This approach considers any random fluctuation of the signal as spurious contribution which is to be eliminated via time-averaging or, equivalently, bandwidth reduction. Beyond that lies a conceptually different paradigm -- the measurement of the system's spontaneous fluctuations. Th…
▽ More
Typical experimental measurement is set up as a study of the system's response to a stationary external excitation. This approach considers any random fluctuation of the signal as spurious contribution which is to be eliminated via time-averaging or, equivalently, bandwidth reduction. Beyond that lies a conceptually different paradigm -- the measurement of the system's spontaneous fluctuations. The goal of this overview article is to demonstrate how current noise measurements bring insight into hidden features of electronic transport in various mesoscopic conductors, ranging from 2D topological insulators to individual carbon nanotubes.
△ Less
Submitted 6 June, 2018;
originally announced June 2018.
-
Sign inversion in the terahertz photoconductivity of single-walled carbon nanotube films
Authors:
Peter Karlsen,
Mikhail V. Shuba,
Polina P. Kuzhir,
Albert G. Nasibulin,
Patrizia Lamberti,
Euan Hendry
Abstract:
In recent years, there have been conflicting reports regarding the ultrafast photoconductive response of films of single walled carbon nanotubes (CNTs), which apparently exhibit photoconductivities that can differ even in sign. Here, we observe explicitly that the THz photoconductivity of CNT films is a highly variable quantity which correlates with the length of the CNTs, while the chirality dist…
▽ More
In recent years, there have been conflicting reports regarding the ultrafast photoconductive response of films of single walled carbon nanotubes (CNTs), which apparently exhibit photoconductivities that can differ even in sign. Here, we observe explicitly that the THz photoconductivity of CNT films is a highly variable quantity which correlates with the length of the CNTs, while the chirality distribution has little influence. Moreover, by comparing the photo-induced change in THz conductivity with heat-induced changes, we show that both occur primarily due to heat-generated modification of the Drude electron relaxation rate, resulting in a broadening of the plasmonic resonance present in finite-length metallic and doped semiconducting CNTs. This clarifies the nature of the photo-response of CNT films and demonstrates the need to carefully consider the geometry of the CNTs, specifically the length, when considering them for application in optoelectronic devices.
△ Less
Submitted 30 April, 2018;
originally announced April 2018.
-
Ambient condition production of high quality reduced graphene oxide
Authors:
Sergey E. Svyakhovskiy,
Fedor S. Fedorov,
Yuri A. Mankelevich,
Pavel V. Dyakonov,
Nikita V. Minaev,
Sarkis A. Dagesyan,
Konstantin I. Maslakov,
Roman A. Khmelnitsky,
Nikolay V. Suetin,
Albert G. Nasibulin,
Iskander Sh. Akhatov,
Stanislav A. Evlashin
Abstract:
Reduced graphene oxide becomes one of the most popular materials for applications in various optical, electronic and sensor devices. Even though many methods have been already reported for reduced graphene oxide synthesis, they usually rise issues related to their efficiency, quality and environmental impact. This work demonstrates a simple, environmentally friendly and effective method for reduci…
▽ More
Reduced graphene oxide becomes one of the most popular materials for applications in various optical, electronic and sensor devices. Even though many methods have been already reported for reduced graphene oxide synthesis, they usually rise issues related to their efficiency, quality and environmental impact. This work demonstrates a simple, environmentally friendly and effective method for reducing graphene oxide under ambient conditions using nanosecond infrared laser irradiation. As a result, a Raman band intensity ratio of I(G)/I(D) of 4.59 was achieved with an average crystallite size of ~90 nm. This graphene is of higher quality than what can be achieved with most of the existing methods. Additionally, the demonstrated reduction technique allows the selective reduction of graphene oxide and control the amount of functional groups on the surface of the material. Gas sensors fabricated according to the proposed technique efficiently detect NO$_2$, NH$_3$, and H$_2$S with the sensitivity down to 10 ppm.
△ Less
Submitted 7 May, 2018; v1 submitted 28 April, 2018;
originally announced April 2018.
-
Influence of nanotube length and density on the plasmonic terahertz response of single-walled carbon nanotubes
Authors:
Peter Karlsen,
Mikhail V. Shuba,
Chris Beckerleg,
Dzmitry I. Yuko,
Polina P. Kuzhir,
Sergey A. Maksimenko,
Vitaly Ksenevich,
Ho Viet,
Albert G. Nasibulin,
Reshef Tenne,
Euan Hendry
Abstract:
We measure the conductivity spectra of thin films comprising bundled single-walled carbon nanotubes (CNTs) of different average lengths in the frequency range 0.3-1000 THz and temperature interval 10-530 K. The observed temperature-induced changes in the terahertz conductivity spectra are shown to depend strongly on the average CNT length, with a conductivity around 1 THz that increases/decreases…
▽ More
We measure the conductivity spectra of thin films comprising bundled single-walled carbon nanotubes (CNTs) of different average lengths in the frequency range 0.3-1000 THz and temperature interval 10-530 K. The observed temperature-induced changes in the terahertz conductivity spectra are shown to depend strongly on the average CNT length, with a conductivity around 1 THz that increases/decreases as the temperature increases for short/long tubes. This behaviour originates from the temperature dependence of the electron scattering rate, which we obtain from Drude fits of the measured conductivity in the range 0.3-2 THz for 10 $μ$m length CNTs. This increasing scattering rate with temperature results in a subsequent broadening of the observed THz conductivity peak at higher temperatures and a shift to lower frequencies for increasing CNT length. Finally, we show that the change in conductivity with temperature depends not only on tube length, but also varies with tube density. We record the effective conductivities of composite films comprising mixtures of WS$_2$ nanotubes and CNTs vs CNT density for frequencies in the range 0.3-1 THz, finding that the conductivity increases/decreases for low/high density films as the temperature increases. This effect arises due to the density dependence of the effective length of conducting pathways in the composite films, which again leads to a shift and temperature dependent broadening of the THz conductivity peak.
△ Less
Submitted 21 October, 2017;
originally announced October 2017.
-
Uncovering the ultimate performance of single-walled carbon nanotube films as transparent conductors
Authors:
Kimmo Mustonen,
Patrik Laiho,
Antti Kaskela,
Toma Susi,
Albert G. Nasibulin,
Esko I. Kauppinen
Abstract:
The ultimate performance - ratio of electrical conductivity to optical absorbance - of single- walled carbon nanotube (SWCNTs) transparent conductive films (TCFs) is an issue of considerable application relevance. Here, we present direct experimental evidence that SWCNT bundling is detrimental for their performance. We combine floating catalyst synthesis of non-bundled, high-quality SWCNTs with an…
▽ More
The ultimate performance - ratio of electrical conductivity to optical absorbance - of single- walled carbon nanotube (SWCNTs) transparent conductive films (TCFs) is an issue of considerable application relevance. Here, we present direct experimental evidence that SWCNT bundling is detrimental for their performance. We combine floating catalyst synthesis of non-bundled, high-quality SWCNTs with an aggregation chamber, in which bundles with mean diameters ranging from 1.38 to 2.90 nm are formed from identical 3 microns long SWCNTs. The as-deposited TCFs from 1.38 nm bundles showed sheet resistances of 310 Ohms/sq. at 90% transparency, while those from larger bundles of 1.80 and 2.90 nm only reached values of 475 and 670 Ohms/sq., respectively. Based on these observations, we elucidate how networks formed by smaller bundles perform better due to their greater interconnectivity at a given optical density. Finally, we present a semi-empirical model for TCF performance as a function of SWCNT mean length and bundle diameter. This gives an estimate for the ultimate performance of non-doped, random network mixed-metallicity SWCNT TCFs at ~80 Ohms/sq. and 90% transparency.
△ Less
Submitted 29 January, 2016;
originally announced January 2016.
-
Gas phase synthesis of non-bundled, small diameter single-walled carbon nanotubes with near-armchair chiralities
Authors:
Kimmo Mustonen,
Patrik Laiho,
Antti Kaskela,
Zhen Zhu,
Olivier Reynaud,
Nikolay Houbenov,
Ying Tian,
Toma Susi,
Hua Jiang,
Albert G. Nasibulin,
Esko I. Kauppinen
Abstract:
We present a novel floating catalyst synthesis route for individual, i.e. non-bundled, small diameter single-walled carbon nanotubes (SWCNTs) with a narrow chiral angle distribution peaking at high chiralities near the armchair species. An ex situ spark discharge generator was used to form iron particles with geometric number mean diameters of 3-4 nm and fed into a laminar flow chemical vapour dep…
▽ More
We present a novel floating catalyst synthesis route for individual, i.e. non-bundled, small diameter single-walled carbon nanotubes (SWCNTs) with a narrow chiral angle distribution peaking at high chiralities near the armchair species. An ex situ spark discharge generator was used to form iron particles with geometric number mean diameters of 3-4 nm and fed into a laminar flow chemical vapour deposition reactor for the continuous synthesis of long and high-quality SWCNTs from ambient pressure carbon monoxide. The intensity ratio of G/D peaks in Raman spectra up to 48 and mean tube lengths up to 4 microns were observed. The chiral distributions, as directly determined by electron diffraction in the transmission electron microscope, clustered around the (n,m) indices (7,6), (8,6), (8,7) and (9,6), with up to 70% of tubes having chiral angles over 20°. The mean diameter of SWCNTs was reduced from 1.10 to 1.04 nm by decreasing the growth temperature from 880 to 750 °C, which simultaneously increased the fraction of semiconducting tubes from 67 to 80%. Limiting the nanotube gas phase number concentration to approx. 100 000 per cubic centimetre successfully prevented nanotube bundle formation that is due to collisions induced by Brownian diffusion. Up to 80 % of 500 as-deposited tubes observed by atomic force and transmission electron microscopy were individual. Transparent conducting films deposited from these SWCNTs exhibited record low sheet resistances of 63 Ohms/sq. at 90 % transparency for 550 nm light.
△ Less
Submitted 29 January, 2016;
originally announced January 2016.
-
Measurement of optical second-harmonic generation from an individual single-walled carbon nanotube
Authors:
M. J. Huttunen,
O. Herranen,
A. Johansson,
H. Jiang,
P. R. Mudimela,
P. Myllyperkiö,
G. Bautista,
A. G. Nasibulin,
E. I. Kauppinen,
M. Ahlskog,
M. Kauranen,
M. Pettersson
Abstract:
We show that optical second-harmonic generation (SHG) can be observed from individual single-walled carbon nanotubes (SWCNTs) and, furthermore, allows imaging of individual tubes. Detailed analysis of our results suggests that the structural noncentrosymmetry, as required for SHG, arises from the non-zero chiral angle of the SWCNT. SHG thus has potential as a fast, non-destructive, and simple meth…
▽ More
We show that optical second-harmonic generation (SHG) can be observed from individual single-walled carbon nanotubes (SWCNTs) and, furthermore, allows imaging of individual tubes. Detailed analysis of our results suggests that the structural noncentrosymmetry, as required for SHG, arises from the non-zero chiral angle of the SWCNT. SHG thus has potential as a fast, non-destructive, and simple method for imaging of individual nanomolecules and for probing their chiral properties. Even more, it opens the possibility to optically determine the handedness of individual SWCNTs.
△ Less
Submitted 20 March, 2013;
originally announced March 2013.
-
High-Yield of Memory Elements from Carbon Nanotube Field-Effect Transistors with Atomic Layer Deposited Gate Dielectric
Authors:
Marcus Rinkiö,
Andreas Johansson,
Marina Y. Zavodchikova,
J. Jussi Toppari,
Albert G. Nasibulin,
Esko I. Kauppinen,
Päivi Törmä
Abstract:
Carbon nanotube field-effect transistors (CNT FETs) have been proposed as possible building blocks for future nano-electronics. But a challenge with CNT FETs is that they appear to randomly display varying amounts of hysteresis in their transfer characteristics. The hysteresis is often attributed to charge trapping in the dielectric layer between the nanotube and the gate. This study includes 94…
▽ More
Carbon nanotube field-effect transistors (CNT FETs) have been proposed as possible building blocks for future nano-electronics. But a challenge with CNT FETs is that they appear to randomly display varying amounts of hysteresis in their transfer characteristics. The hysteresis is often attributed to charge trapping in the dielectric layer between the nanotube and the gate. This study includes 94 CNT FET samples, providing an unprecedented basis for statistics on the hysteresis seen in five different CNT-gate configurations. We find that the memory effect can be controlled by carefully designing the gate dielectric in nm-thin layers. By using atomic layer depositions (ALD) of HfO$_{2}$ and TiO$_{2}$ in a triple-layer configuration, we achieve the first CNT FETs with consistent and narrowly distributed memory effects in their transfer characteristics.
△ Less
Submitted 25 February, 2008; v1 submitted 15 January, 2008;
originally announced January 2008.