-
Infrared nanoplasmonic properties of hyperdoped embedded Si nanocrystals in the few electrons regime
Authors:
Meiling Zhang,
Jean-Marie Poumirol,
Nicolas Chery,
Clment Majorel,
Rémi Demoulin,
Etienne Talbot,
Hervé Rinnert,
Christian Girard,
Filadelfo Cristiano,
Peter R. Wiecha,
Teresa Hungria,
Vincent Paillard,
Arnaud Arbouet,
Béatrice Pécassou,
Fabrice Gourbilleau,
Caroline Bonafos
Abstract:
Using Localized Surface Plasmon Resonance (LSPR) as an optical probe we demonstrate the presence of free carriers in phosphorus doped silicon nanocrystals (SiNCs) embedded in a silica matrix. In small SiNCs, with radius ranging from 2.6 to 5.5 nm, the infrared spectroscopy study coupled to numerical simulations allows us to determine the number of electrically active phosphorus atoms with a precis…
▽ More
Using Localized Surface Plasmon Resonance (LSPR) as an optical probe we demonstrate the presence of free carriers in phosphorus doped silicon nanocrystals (SiNCs) embedded in a silica matrix. In small SiNCs, with radius ranging from 2.6 to 5.5 nm, the infrared spectroscopy study coupled to numerical simulations allows us to determine the number of electrically active phosphorus atoms with a precision of a few atoms. We demonstrate that LSP resonances can be supported with only about 10 free electrons per nanocrystal, confirming theoretical predictions and probing the limit of the collective nature of plasmons. We reveal a phenomenon, unique to embedded nanocrystals, with the appearance of an avoided crossing behavior linked to the hybridization between the localized surface plasmon in the doped nanocrystals and the silica matrix phonon modes. Finally, a careful analysis of the scattering time dependence versus carrier density in the small size regime allows us to detect the appearance of a new scattering process at high dopant concentration.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
Large perpendicular magnetic anisotropy in Ta/CoFeB/MgO on full coverage monolayer MoS2 and first principle study of its electronic structure
Authors:
Ziqi Zhou,
Paul Marcon,
Xavier Devaux,
Philippe Pigeat,
Alexandre Bouché,
Sylvie Migot,
Abdallah Jaafar,
Remi Arras,
Michel Vergnat,
Lei Ren,
Hans Tornatzky,
Cedric Robert,
Xavier Marie,
Jean-Marie George,
Henri-Yves Jaffrès,
Mathieu Stoffel,
Hervé Rinnert,
Zhongming Wei,
Pierre Renucci,
Lionel Calmels,
Yuan Lu
Abstract:
Perpendicularly magnetized spin injector with high Curie temperature is a prerequisite for developing spin optoelectronic devices on 2D materials working at room temperature (RT) with zero applied magnetic field. Here, we report the growth of Ta/CoFeB/MgO structures with a large perpendicular magnetic anisotropy (PMA) on full coverage monolayer (ML) MoS2. A large perpendicular interface anisotropy…
▽ More
Perpendicularly magnetized spin injector with high Curie temperature is a prerequisite for developing spin optoelectronic devices on 2D materials working at room temperature (RT) with zero applied magnetic field. Here, we report the growth of Ta/CoFeB/MgO structures with a large perpendicular magnetic anisotropy (PMA) on full coverage monolayer (ML) MoS2. A large perpendicular interface anisotropy energy of 0.975mJ/m2 has been obtained at the CoFeB/MgO interface, comparable to that observed in magnetic tunnel junction systems. It is found that the insertion of MgO between the ferromagnetic metal (FM) and the 2D material can effectively prevent the diffusion of the FM atoms into the 2D material. Moreover, the MoS2 ML favors a MgO(001) texture and plays a critical role to establish the large PMA. First principle calculations on a similar Fe/MgO/MoS2 structure reveal that the MgO thickness can modify the MoS2 band structure, from an indirect bandgap with 7ML-MgO to a direct bandgap with 3ML-MgO. Proximity effect induced by Fe results in a splitting of 10meV in the valence band at the Γ point for the 3ML-MgO structure while it is negligible for the 7ML-MgO structure. These results pave the way to develop RT spin optoelectronic devices on 2D transition-metal dichalcogenide materials.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
Structural, chemical and optical characterizations of nanocrystallized AlN:Er thin films prepared by r.f. magnetron sputtering
Authors:
Valerie Brien,
P. Miska,
H. Rinnert,
D. Genève,
P. Pigeat
Abstract:
Nanocrystalline n-AlN:Er thin films were deposited on (001) Silicon substrates by r. f. magnetron sputtering at room temperature to study the correlation between 1.54 $μ$m IR photoluminescence (PL) intensity, AlN crystalline structure and Er concentration rate. This study first presents how Energy-Dispersive Spectroscopy of X-rays (EDSX) Er Cliff Lorimer sensitivity factor alpha = 5 is obtained by…
▽ More
Nanocrystalline n-AlN:Er thin films were deposited on (001) Silicon substrates by r. f. magnetron sputtering at room temperature to study the correlation between 1.54 $μ$m IR photoluminescence (PL) intensity, AlN crystalline structure and Er concentration rate. This study first presents how Energy-Dispersive Spectroscopy of X-rays (EDSX) Er Cliff Lorimer sensitivity factor alpha = 5 is obtained by combining EDSX and electron probe micro analysis (EPMA) results on reference samples. It secondly presents the relative PL intensities of nanocrystallized samples prepared with identical sputtering parameters as a function of the Er concentration. The structure of crystallites in AlN films is observed by transmission electron microscopy.
△ Less
Submitted 26 October, 2020;
originally announced October 2020.
-
Optical characterization of nanocrystallized AlN:Er films prepared by magnetron sputtering
Authors:
Valerie Brien,
Manuel Dossot,
Hervé Rinnert,
Sajjad Hussain Sajjad,
Bernard Humbert,
P. Pigeat
Abstract:
In the prospect of understanding the photoluminescence mechanisms of AlN films doped with erbium and targeting photonic applications we have synthesized non doped and Er-doped AlN films with different crystallized nanostructures by using PVD magnetron sputtering. Their crystalline morphology and their visible photoluminescence properties were precisely measured.Due to the weak cross-section absorp…
▽ More
In the prospect of understanding the photoluminescence mechanisms of AlN films doped with erbium and targeting photonic applications we have synthesized non doped and Er-doped AlN films with different crystallized nanostructures by using PVD magnetron sputtering. Their crystalline morphology and their visible photoluminescence properties were precisely measured.Due to the weak cross-section absorption of rare earths like erbium, it is necessary to obtain an efficient energy transfer mechanism between the host matrix and the rare earth to obtain high luminescence efficiency. Our strategy is then to elaborate some nanostructures that could introduce additional intermediate electronic levels within the gap thanks to the presence of structural defects (point defects, grain boundaries{\ldots}) and could lead to energy transfer from the AlN matrix to the rare earth.Doped and non-doped AlN films were prepared by radio frequency magnetron sputtering by using different experimental conditions that will be detailed. It will notably be shown how a negative polarization of samples during deposition allows obtaining crystalline morphologies ranging from the classical columnar structure to a highly disordered polycrystalline structure with grains of several nanometers (nearly amorphous). The nanostructures of the films could be categorized in three types: 1) type 1 was nanocolumnar (width of column ~ 15 nm), 2) type 2 was made of short columns (width of column ~ 10 nm) and 3) the last type was made of equiaxed nanocrystallites (size of grains ~3-4 nm).High-resolution photoluminescence spectroscopy was performed to characterize their optical behaviour. The samples were excited by the laser wavelengths at 458, 488 or 514 nm. A broad photoluminescence band was observed centred around 520 nm in columnar samples. In the same energy range, the highly resolved spectra also showed several sharp emission peaks. This fine structure could be attributed to erbium transitions. This fine structure tended to disappear going from type 1 to type 3 samples. Indeed, the relative intensity of the peaks decreased and their full width at half maximum increased. This change could be related to the density of defects that increased when the size of the grains decreased. The photoluminescence properties of the films in the visible range will be discussed in relation with their structure.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
Spin-injection and spin-relaxation in p-doped InGaAs/GaAs quantum-dot spin light emitting diode at zero magnetic field
Authors:
Alaa E. Giba,
Xue Gao,
Mathieu Stoffel,
Xavier Devaux,
Bo Xu,
Xavier Marie,
Pierre Renucci,
Henri Jaffrès,
Jean-Marie George,
Guangwei Cong,
Zhanguo Wang,
Hervé Rinnert,
Yuan Lu
Abstract:
We report on efficient spin injection in p-doped InGaAs/GaAs quantum-dot (QD) spin light emitting diode (spin-LED) under zero applied magnetic field. A high degree of electroluminescence circular polarization (Pc) ~19% is measured in remanence up to 100K. This result is obtained thanks to the combination of a perpendicularly magnetized CoFeB/MgO spin injector allowing efficient spin injection and…
▽ More
We report on efficient spin injection in p-doped InGaAs/GaAs quantum-dot (QD) spin light emitting diode (spin-LED) under zero applied magnetic field. A high degree of electroluminescence circular polarization (Pc) ~19% is measured in remanence up to 100K. This result is obtained thanks to the combination of a perpendicularly magnetized CoFeB/MgO spin injector allowing efficient spin injection and an appropriate p-doped InGaAs/GaAs QD layer in the active region. By analyzing the bias and temperature dependence of the electroluminescence circular polarization, we have evidenced a two-step spin relaxation process. The first step occurs when electrons tunnel through the MgO barrier and travel across the GaAs depletion layer. The spin relaxation is dominated by the Dyakonov-Perel mechanism related to the kinetic energy of electrons, which is characterized by a bias dependent Pc. The second step occurs when electrons are captured into QDs prior to their radiative recombination with holes. The temperature dependence of Pc reflects the temperature induced modification of the QDs doping, together with the variation of the ratio between the charge carrier lifetime and the spin relaxation time inside the QDs. The understanding of these spin relaxation mechanisms is essential to improve the performance of spin LED for future spin optoelectronic applications at room temperature under zero applied magnetic field.
△ Less
Submitted 14 August, 2020;
originally announced August 2020.
-
Influence of the magnetron power on the Er-related photoluminescence of AlN:Er films prepared by magnetron sputtering
Authors:
Syed Sajjad Hussain,
Valerie Brien,
Hervé Rinnert,
Philippe Pigeat
Abstract:
The effect of magnetron power on the room temperature 1.54 $μ$m infra-red photoluminescence intensity of erbium doped AlN films grown by r. f. magnetron sputtering, has been studied. The AlN:Er thin films were deposited on (001) Silicon substrates. The study presents relative photoluminescence intensities of nanocrystallized samples prepared with identical sputtering parameters for two erbium dopi…
▽ More
The effect of magnetron power on the room temperature 1.54 $μ$m infra-red photoluminescence intensity of erbium doped AlN films grown by r. f. magnetron sputtering, has been studied. The AlN:Er thin films were deposited on (001) Silicon substrates. The study presents relative photoluminescence intensities of nanocrystallized samples prepared with identical sputtering parameters for two erbium doping levels (0.5 and 1.5 atomic %). The structural evolution of the crystallites as a function of the power is followed by transmission electron microscopy. Copyright line will be provided by the publisher 1 Introduction For some time now, rare-earth (RE)-doped semiconductors represent significant potential applications in the field of opto-electronic technology. Part of this technological interest relies on the shielded 4f levels of the RE ions as they give rise to sharp and strong luminescence peaks [1-5]. Among the RE elements, Er is preferred to its counterparts since the Er ions can produce both visible light at 558 nm (green, one of the primary colours) and IR light at 1.54 $μ$m whose spectrum region coincides with the main low-loss region in the absorption spectrum of silica-based optical fibres, combining so potential applications towards photonic devices and towards optical communication devices operating in the infrared domain. These interesting emissions can however only be exploited when placed into host matrixes. On one side, the shielding of the intra 4f levels prevents the shifting of the RE 3+ energy levels and ensures the frequency emission stability. Moreover the intra 4f transitions are parity forbidden for the isolated ions. Matrixes can render the Er 3+ ions optically active, via a relaxation of selection rules due to crystal field effects. As silicon based materials were tested in the 1960s to the 90s with no clear industrial success it was found that the
△ Less
Submitted 13 September, 2019;
originally announced September 2019.
-
Photoluminescence properties of Er-doped AlN films prepared by magnetron sputtering
Authors:
H. Rinnert,
S. S. Hussain,
Valerie Brien,
P. Pigeat
Abstract:
Er-doped aluminum nitride films, containing different Er concentrations, were obtained at room temperature by reactive radio frequency magnetron sputtering. The prepared samples show a nano-columnar microstructure and the size of the columns is dependent on the magnetron power. The Er-related photoluminescence (PL) was studied in relation with the temperature, the Er content and the microstructure…
▽ More
Er-doped aluminum nitride films, containing different Er concentrations, were obtained at room temperature by reactive radio frequency magnetron sputtering. The prepared samples show a nano-columnar microstructure and the size of the columns is dependent on the magnetron power. The Er-related photoluminescence (PL) was studied in relation with the temperature, the Er content and the microstructure. Steady-state PL, PL excitation spectroscopy and time-resolved PL were performed. Both visible and near infrared PL were obtained at room temperature for the as-deposited samples. It is demonstrated that the PL intensity reaches a maximum for an Er concentration equal to 1 at. % and that the PL efficiency is an increasing function of the magnetron power. Decay time measurements show the important role of defect related non radiative recombination, assumed to be correlated to the presence of grain boundaries. Moreover PL excitation results demonstrate that an indirect excitation of Er 3+ ions occurs for excitation wavelengths lower than 600 nm. It is also suggested that Er ions occupy at least two different sites in the AlN host matrix.
△ Less
Submitted 3 April, 2019;
originally announced April 2019.
