-
One-Step Formation of Plasmonic Cu Nanodomains in p-Type Cu$_2$O Matrix Films for Enhanced Photoconversion of n-ZnO/p-Cu$_2$O Heterojunctions
Authors:
Yerila Rodríguez-Martínez,
Lídice Vaillant-Roca,
Jaafar Ghanbaja,
Sylvie Migot,
Yann Battie,
Sidi Ould Saad Hamady,
David Horwat
Abstract:
Plasmonic Cu nanoparticles were in-situ grown into a Cu$_2$O semiconductor matrix by using reactive magnetron sputtering and adjusting the amount of oxygen available during the synthesis in order to prevent the oxidation of part of copper atoms landed on the film surface. Varying only the oxygen flowrate (OFR) and using a single Cu target it was possible to observe the evolution in the simultaneou…
▽ More
Plasmonic Cu nanoparticles were in-situ grown into a Cu$_2$O semiconductor matrix by using reactive magnetron sputtering and adjusting the amount of oxygen available during the synthesis in order to prevent the oxidation of part of copper atoms landed on the film surface. Varying only the oxygen flowrate (OFR) and using a single Cu target it was possible to observe the evolution in the simultaneous formation of metallic Cu and Cu$_2$O phases for oxygen-poor conditions. Suchformation is accompanied by the development of the surface plasmon band (SPB) corresponding to Cu, as evidenced by UV-Vis spectrophotometry and spectroscopic ellipsometry. The bandgap values of the elaborated composites containing embedded Cu plasmonic nanodomains were lower than the bandgap of single-phased Cu$_2$O films, likely due to the higher defect density associated to the nanocrystalline nature of films, promoted by the presence of metallic Cu. The resistivity of the thin films increased with more oxidative deposition conditions and was associated to an increase in Cu$_2$O/Cu ratio and smaller and more isolated Cu particles, as evidenced by high resolution transmission electron microscopy and X-ray diffraction. Photoconversion devices based on the studied nanocomposites were characterized by I-V and spectral photocurrent measurements, showing an increase in the photocurrent density under light illumination as consequence of the plasmonic particles excitation leading to hot carrier's injection in the nearby ZnO and Cu$_2$O semiconductors.
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
Ferrimagnet GdFeCo characterization for spin-orbitronics: large field-like and damping-like torques
Authors:
Héloïse Damas,
Alberto Anadon,
David Céspedes-Berrocal,
Junior Alegre-Saenz,
Jean-Loïs Bello,
Aldo Arriola-Córdova,
Sylvie Migot,
Jaafar Ghanbaja,
Olivier Copie,
Michel Hehn,
Vincent Cros,
Sébastien Petit-Watelot,
Juan-Carlos Rojas-Sánchez
Abstract:
Spintronics is showing promising results in the search for new materials and effects to reduce energy consumption in information technology. Among these materials, ferrimagnets are of special interest, since they can produce large spin currents that trigger the magnetization dynamics of adjacent layers or even their own magnetization. Here, we present a study of the generation of spin current by G…
▽ More
Spintronics is showing promising results in the search for new materials and effects to reduce energy consumption in information technology. Among these materials, ferrimagnets are of special interest, since they can produce large spin currents that trigger the magnetization dynamics of adjacent layers or even their own magnetization. Here, we present a study of the generation of spin current by GdFeCo in a GdFeCo/Cu/NiFe trilayer where the FeCo sublattice magnetization is dominant at room temperature. Magnetic properties such as the saturation magnetization are deduced from magnetometry measurements while damping constant is estimated from spin-torque ferromagnetic resonance (ST-FMR). We show that the overall damping-like (DL) and field-like (FL) effective fields as well as the associated spin Hall angles can be reliably obtained by performing the dependence of ST-FMR by an added dc current. The sum of the spin Hall angles for both the spin Hall effect (SHE) and the spin anomalous Hall effect (SAHE) symmetries are: $θ_{DL}^{SAHE} + θ_{DL}^{SHE}=-0.15 \pm 0.05$ and $θ_{FL}^{SAHE} + θ_{FL}^{SHE}=0.026 \pm 0.005$. From the symmetry of ST-FMR signals we find that $θ_{DL}^{SHE}$ is positive and dominated by the negative $θ_{DL}^{SAHE}$. The present study paves the way for tuning the different symmetries in spin conversion in highly efficient ferrimagnetic systems.
△ Less
Submitted 20 April, 2022;
originally announced April 2022.
-
Large perpendicular magnetic anisotropy in Ta/CoFeB/MgO on full coverage monolayer MoS2 and first principle study of its electronic structure
Authors:
Ziqi Zhou,
Paul Marcon,
Xavier Devaux,
Philippe Pigeat,
Alexandre Bouché,
Sylvie Migot,
Abdallah Jaafar,
Remi Arras,
Michel Vergnat,
Lei Ren,
Hans Tornatzky,
Cedric Robert,
Xavier Marie,
Jean-Marie George,
Henri-Yves Jaffrès,
Mathieu Stoffel,
Hervé Rinnert,
Zhongming Wei,
Pierre Renucci,
Lionel Calmels,
Yuan Lu
Abstract:
Perpendicularly magnetized spin injector with high Curie temperature is a prerequisite for developing spin optoelectronic devices on 2D materials working at room temperature (RT) with zero applied magnetic field. Here, we report the growth of Ta/CoFeB/MgO structures with a large perpendicular magnetic anisotropy (PMA) on full coverage monolayer (ML) MoS2. A large perpendicular interface anisotropy…
▽ More
Perpendicularly magnetized spin injector with high Curie temperature is a prerequisite for developing spin optoelectronic devices on 2D materials working at room temperature (RT) with zero applied magnetic field. Here, we report the growth of Ta/CoFeB/MgO structures with a large perpendicular magnetic anisotropy (PMA) on full coverage monolayer (ML) MoS2. A large perpendicular interface anisotropy energy of 0.975mJ/m2 has been obtained at the CoFeB/MgO interface, comparable to that observed in magnetic tunnel junction systems. It is found that the insertion of MgO between the ferromagnetic metal (FM) and the 2D material can effectively prevent the diffusion of the FM atoms into the 2D material. Moreover, the MoS2 ML favors a MgO(001) texture and plays a critical role to establish the large PMA. First principle calculations on a similar Fe/MgO/MoS2 structure reveal that the MgO thickness can modify the MoS2 band structure, from an indirect bandgap with 7ML-MgO to a direct bandgap with 3ML-MgO. Proximity effect induced by Fe results in a splitting of 10meV in the valence band at the Γ point for the 3ML-MgO structure while it is negligible for the 7ML-MgO structure. These results pave the way to develop RT spin optoelectronic devices on 2D transition-metal dichalcogenide materials.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
Current-induced spin torques on single GdFeCo magnetic layers
Authors:
David Céspedes-Berrocal,
Heloïse Damas,
Sébastien Petit-Watelot,
David Maccariello,
Ping Tang,
Aldo Arriola-Córdova,
Pierre Vallobra,
Yong Xu,
Jean-Loïs Bello,
Elodie Martin,
Sylvie Migot,
Jaafar Ghanbaja,
Shufeng Zhang,
Michel Hehn,
Stéphane Mangin,
Christos Panagopoulos,
Vincent Cros,
Albert Fert,
Juan-Carlos Rojas-Sánchez
Abstract:
Spintronics exploits spin-orbit coupling (SOC) to generate spin currents, spin torques, and, in the absence of inversion symmetry, Rashba, and Dzyaloshinskii-Moriya interactions (DMI). The widely used magnetic materials, based on 3d metals such as Fe and Co, possess a small SOC. To circumvent this shortcoming, the common practice has been to utilize the large SOC of nonmagnetic layers of 5d heavy…
▽ More
Spintronics exploits spin-orbit coupling (SOC) to generate spin currents, spin torques, and, in the absence of inversion symmetry, Rashba, and Dzyaloshinskii-Moriya interactions (DMI). The widely used magnetic materials, based on 3d metals such as Fe and Co, possess a small SOC. To circumvent this shortcoming, the common practice has been to utilize the large SOC of nonmagnetic layers of 5d heavy metals (HMs), such as Pt, to generate spin currents by Spin Hall Effect (SHE) and, in turn, exert spin torques on the magnetic layers. Here, we introduce a new class of material architectures, excluding nonmagnetic 5d HMs, for high-performance spintronics operations. We demonstrate very strong current-induced torques exerted on single GdFeCo layers due to the combination of large SOC of the Gd 5d states, and inversion symmetry breaking mainly engineered by interfaces. These "self-torques" are enhanced around the magnetization compensation temperature (close to room temperature) and can be tuned by adjusting the spin absorption outside the GdFeCo layer. In other measurements, we determine the very large emission of spin current from GdFeCo. This material platform opens new perspectives to exert "self-torques" on single magnetic layers as well as to generate spin currents from a magnetic layer.
△ Less
Submitted 18 October, 2020;
originally announced October 2020.
-
Temperature dependence of transport mechanisms in organic multiferroic tunnel junctions
Authors:
Can Xiao,
Huawei Sun,
Luming Cheng,
Xavier Devaux,
Anthony Ferri,
Weichuan Huang,
Rachel Desfeux,
Xiao-Guang Li,
Sylvie Migot,
Mairbek Chshiev,
Sajid Rauf,
Yajun Qi,
Ruilong Wang,
Tianjin Zhang,
Changping Yang,
Shiheng Liang,
Yuan Lu
Abstract:
Organic multiferroic tunnel junctions (OMFTJs) with multi-resistance states have been proposed and drawn intensive interests due to their potential applications, for examples of memristor and spintronics based synapse devices. The ferroelectric control of spin-polarization at ferromagnet (FM)/ferroelectric organic (FE-Org) interface by electrically switching the ferroelectric polarization of the F…
▽ More
Organic multiferroic tunnel junctions (OMFTJs) with multi-resistance states have been proposed and drawn intensive interests due to their potential applications, for examples of memristor and spintronics based synapse devices. The ferroelectric control of spin-polarization at ferromagnet (FM)/ferroelectric organic (FE-Org) interface by electrically switching the ferroelectric polarization of the FE-Org has been recently realized. However, there is still a lack of understanding of the transport properties in OMFTJs, especially the interplay between the ferroelectric domain structure in the organic barrier and the spin-polarized electron tunneling through the barrier. Here, we report on a systematic study of the temperature dependent transport behavior in La0.6Sr0.4MnO3/PVDF/Co OMFTJs. It is found that the thermal fluctuation of the ferroelectric domains plays an important role on the transport properties. When T>120K, the opposite temperature dependence of resistance for in up and down ferroelectric polarization states results in a rapid diminishing of tunneling electroresistance (TER). These results contribute to the understanding of the transport properties for designing high performance OMFTJs for memristor and spintronics applications.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
Room Temperature Spin to Charge Conversion in Amorphous Topological Insulating Gd-Alloyed BixSe1-x/CoFeB Bilayers
Authors:
Protyush Sahu,
Yifei Yang,
Yihong Fan,
Henri Jaffres,
Jun-Yang Chen,
Xavier Devaux,
Yannick Fagot-Revurat,
Sylvie Migot,
Enzo Rongione,
Sukdheep Dhillon,
Tongxin Chen,
Pambiang Abel Dainone,
Jean-Marie George,
Yuan Lu,
Jian-Ping Wang
Abstract:
Disordered topological insulator (TI) films have gained intense interest by benefiting from both the TIs exotic transport properties and the advantage of mass production by sputtering. Here, we report on the clear evidence of spin-charge conversion (SCC) in amorphous Gd-alloyed BixSe1-x (BSG)/CoFeB bilayers fabricated by sputtering, which could be related to the amorphous TI surface states. Two me…
▽ More
Disordered topological insulator (TI) films have gained intense interest by benefiting from both the TIs exotic transport properties and the advantage of mass production by sputtering. Here, we report on the clear evidence of spin-charge conversion (SCC) in amorphous Gd-alloyed BixSe1-x (BSG)/CoFeB bilayers fabricated by sputtering, which could be related to the amorphous TI surface states. Two methods have been employed to study SCC in BSG/CoFeB(5 nm) bilayers with different BSG thicknesses. Firstly, spin pumping is used to generate a spin current in CoFeB and to detect SCC by inverse Edelstein effect. The maximum SCC efficiency (SCE) is measured as large as 0.035 nm in a 6 nm thick BSG sample, which shows a strong decay when tBSG increases due to the increase of BSG surface roughness. The second method is the THz time-domain spectroscopy, which reveals a small tBSG dependence of SCE, validating the occurrence of a pure interface state related SCC. Furthermore, our angle-resolved photoemission spectroscopy data show dispersive two-dimensional surface states that cross the bulk gap until to the Fermi level, strengthening the possibility of SCC due to the amorphous TI states. Our studies provide a new experimental direction towards the search for topological systems in the amorphous solids.
△ Less
Submitted 30 July, 2023; v1 submitted 8 November, 2019;
originally announced November 2019.
-
Evidence of Pure Spin-Current Generated by Spin Pumping in Interface Localized States in Hybrid Metal-Silicon-Metal Vertical Structures
Authors:
C. Cerqueira,
J. Y. Qin,
H. Dang,
A. Djeffal,
J. -C. Le Breton,
M. Hehn,
J. -C. Rojas-Sanchez,
X. Devaux,
S. Suire,
S. Migot,
P. Schieffer,
J. -G. Mussot,
P. Laczkowski,
A. Anane,
S. Petit-Watelot,
M. Stoffel,
S. Mangin,
Z. Liu,
B. W. Cheng,
X. F. Han,
H. Jaffrès,
J. -M. George,
Y. Lu
Abstract:
Due to the difficulty to grow high quality semiconductors on ferromagnetic metals, the study of spin diffusion transport in Si was only limited to lateral geometry devices. In this work, by using ultra-high vacuum wafer-bonding technique, we have successfully fabricated metal semiconductor metal CoFeB/MgO/Si/Pt vertical structures. We hereby demonstrate pure spin-current injection and transport in…
▽ More
Due to the difficulty to grow high quality semiconductors on ferromagnetic metals, the study of spin diffusion transport in Si was only limited to lateral geometry devices. In this work, by using ultra-high vacuum wafer-bonding technique, we have successfully fabricated metal semiconductor metal CoFeB/MgO/Si/Pt vertical structures. We hereby demonstrate pure spin-current injection and transport in the perpendicular current flow geometry over a distance larger than 2μm in n-type Si at room temperature. In those experiments, a pure propagating spin-current is generated via ferromagnetic resonance spin-pumping and converted into a measurable voltage by using the inverse spin-Hall effect occurring in the top Pt layer. A systematic study by varying both Si and MgO thicknesses reveals the important role played by the localized states at the MgO/Si interface for the spin-current generation. Proximity effects involving indirect exchange interactions between the ferromagnet and the MgO/Si interface states appears to be a prerequisite to establish the necessary out-of-equilibrium spin-population in Si under the spin-pumping action.
△ Less
Submitted 10 February, 2019;
originally announced February 2019.
