-
Experimental Single Electron 4D Tracking in IOTA
Authors:
A. Romanov,
J. Santucci,
G. Stancari
Abstract:
This paper presents the results of the first experiments on 4D tracking of a single electron using a linear multi-anode photomultiplier tube. The reported technology makes it is possible to fully track a single electron in a storage ring, which requires tracking of amplitudes and phases for both, slow synchrotron and fast betatron oscillations. Complete tracking of a point-like object enabled the…
▽ More
This paper presents the results of the first experiments on 4D tracking of a single electron using a linear multi-anode photomultiplier tube. The reported technology makes it is possible to fully track a single electron in a storage ring, which requires tracking of amplitudes and phases for both, slow synchrotron and fast betatron oscillations. Complete tracking of a point-like object enabled the first direct measurements of single-particle dynamical properties, including dynamical invariants, amplitude-dependent oscillation frequencies, and chaotic behavior.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
Experimental demonstration of OSC at IOTA: IOTA Run #3 Report
Authors:
J. Jarvis,
V. Lebedev,
A. Romanov,
D. Broemmelsiek,
K. Carlson,
S. Chattopadhyay,
A. Dick,
D. Edstrom,
I. Lobach,
S. Nagaitsev,
H. Piekarz,
P. Piot,
J. Ruan,
J. Santucci,
G. Stancari,
A. Valishev
Abstract:
Optical Stochastic Cooling (OSC) is an optical-bandwidth extension of Stochastic Cooling that could advance the state-of-the-art cooling rate in beam cooling by three to four orders of magnitude [1-3]. The concept of OSC was first suggested in the early 1990s by Zolotorev, Zholents and Mikhailichenko, and replaced the microwave hardware of SC with optical analogs, such as wigglers and optical ampl…
▽ More
Optical Stochastic Cooling (OSC) is an optical-bandwidth extension of Stochastic Cooling that could advance the state-of-the-art cooling rate in beam cooling by three to four orders of magnitude [1-3]. The concept of OSC was first suggested in the early 1990s by Zolotorev, Zholents and Mikhailichenko, and replaced the microwave hardware of SC with optical analogs, such as wigglers and optical amplifiers. A number of variations on the original OSC concept have been proposed, and while a variety of proof-of-principle demonstrations and operational uses have been considered, the concept was not experimentally demonstrated up to now [4-9]. An OSC R&D program has been underway at IOTA for the past several years [4]. Run #3 of the IOTA ring, which began in Nov. 2020 and concluded in Aug. 2021, was focused on the worlds first experimental demonstration of OSC. The experimental program was successful in demonstrating and characterizing the OSC physics with the major outcomes including strong cooling in one, two and three dimensions, validation of the theoretical models of OSC and the demonstration of OSC with a single electron. This report briefly describes the activities and major milestones of the OSC program during Run #3. Detailed descriptions of the OSC theory, conceptual design and hardware elements can be found in reference [4].
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
First Experimental Demonstration of Optical Stochastic Cooling
Authors:
J. Jarvis,
V. Lebedev,
A. Romanov,
D. Broemmelsiek,
K. Carlson,
S. Chattopadhyay,
A. Dick,
D. Edstrom,
I. Lobach,
S. Nagaitsev,
H. Piekarz,
P. Piot,
J. Ruan,
J. Santucci,
G. Stancari,
A. Valishev
Abstract:
Particle accelerators and storage rings have been transformative instruments of discovery, and, for many applications, innovations in particle-beam cooling have been a principal driver of that success1. Beam cooling reduces the spread in particle positions and momenta, while keeping the number of particles constant, and combats diffusive effects, thereby enabling particle accumulation and the prod…
▽ More
Particle accelerators and storage rings have been transformative instruments of discovery, and, for many applications, innovations in particle-beam cooling have been a principal driver of that success1. Beam cooling reduces the spread in particle positions and momenta, while keeping the number of particles constant, and combats diffusive effects, thereby enabling particle accumulation and the production and preservation of intense beams. In the case of particle colliders, cooling increases the likelihood of observing rare physics events. One of the most important conceptual and technological advances in this area was stochastic cooling (SC), which was instrumental in the discovery of the W and Z bosons at CERN and the top quark at Fermilab2-6. SC reduces the random motion of the beam particles through granular sampling and correction of the beams phase-space structure, thus bearing resemblance to a Maxwells demon. The extension of SC from the microwave regime up to optical frequencies and bandwidths has long been pursued as it could increase the achievable cooling rates by three to four orders of magnitude and provide a powerful new tool for future accelerators. First proposed nearly thirty years ago, Optical Stochastic Cooling (OSC) replaces the conventional microwave elements of SC with optical-frequency analogs and is, in principle, compatible with any species of charged-particle beam7,8. Here we describe the first experimental demonstration of OSC in a proof-of-principle experiment9 at the Fermi National Accelerator Laboratorys Integrable Optics Test Accelerator10.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Matter-wave Atomic Gradiometer Interferometric Sensor (MAGIS-100)
Authors:
Mahiro Abe,
Philip Adamson,
Marcel Borcean,
Daniela Bortoletto,
Kieran Bridges,
Samuel P. Carman,
Swapan Chattopadhyay,
Jonathon Coleman,
Noah M. Curfman,
Kenneth DeRose,
Tejas Deshpande,
Savas Dimopoulos,
Christopher J. Foot,
Josef C. Frisch,
Benjamin E. Garber,
Steve Geer,
Valerie Gibson,
Jonah Glick,
Peter W. Graham,
Steve R. Hahn,
Roni Harnik,
Leonie Hawkins,
Sam Hindley,
Jason M. Hogan,
Yijun Jiang
, et al. (23 additional authors not shown)
Abstract:
MAGIS-100 is a next-generation quantum sensor under construction at Fermilab that aims to explore fundamental physics with atom interferometry over a 100-meter baseline. This novel detector will search for ultralight dark matter, test quantum mechanics in new regimes, and serve as a technology pathfinder for future gravitational wave detectors in a previously unexplored frequency band. It combines…
▽ More
MAGIS-100 is a next-generation quantum sensor under construction at Fermilab that aims to explore fundamental physics with atom interferometry over a 100-meter baseline. This novel detector will search for ultralight dark matter, test quantum mechanics in new regimes, and serve as a technology pathfinder for future gravitational wave detectors in a previously unexplored frequency band. It combines techniques demonstrated in state-of-the-art 10-meter-scale atom interferometers with the latest technological advances of the world's best atomic clocks. MAGIS-100 will provide a development platform for a future kilometer-scale detector that would be sufficiently sensitive to detect gravitational waves from known sources. Here we present the science case for the MAGIS concept, review the operating principles of the detector, describe the instrument design, and study the detector systematics.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
Experimental 3-dimensional tracking of the dynamics of a single electron in the Fermilab Integrable Optics Test Accelerator (IOTA)
Authors:
Aleksandr Romanov,
James Santucci,
Giulio Stancari,
Alexander Valishev,
Nikita Kuklev
Abstract:
We present the results of experimental studies on the transverse and longitudinal dynamics of a single electron in the IOTA storage ring. IOTA is a flexible machine dedicated to beam physics experiments with electrons and protons. A method was developed to reliably inject and circulate a controlled number of electrons in the ring. A key beam diagnostic system is the set of sensitive high-resolutio…
▽ More
We present the results of experimental studies on the transverse and longitudinal dynamics of a single electron in the IOTA storage ring. IOTA is a flexible machine dedicated to beam physics experiments with electrons and protons. A method was developed to reliably inject and circulate a controlled number of electrons in the ring. A key beam diagnostic system is the set of sensitive high-resolution digital cameras for the detection of synchrotron light emitted by the electrons. With 60-130 electrons in the machine, we measured beam lifetime and derived an absolute calibration of the optical system. At exposure times of 0.5 s, the cameras were sensitive to individual electrons. Camera images were used to reconstruct the time evolution of oscillation amplitudes of a single electron in all 3 degrees of freedom. The evolution of amplitudes directly showed the interplay between synchrotron-radiation damping, quantum excitations, and scattering with the residual gas. From the distribution of measured single-electron oscillation amplitudes, we deduced transverse emittances, momentum spread, damping times, and beam energy. Estimates of residual-gas density and composition were calculated from the measured distributions of vertical scattering angles. Combining scattering and lifetime data, we also provide an estimate of the aperture of the ring. To our knowledge, this is the first time that the dynamics of a single electron are tracked in all three dimensions with digital cameras in a storage ring.
△ Less
Submitted 1 October, 2021; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Commissioning and Operation of FAST Electron Linac at Fermilab
Authors:
A. Romanov,
C. Baffes,
D. R. Broemmelsiek,
K. Carlson,
D. J. Crawford,
N. Eddy,
D. Edstrom Jr.,
E. R. Harms,
J. Hurd,
M. Kucera,
J. Leibfritz,
I. Rakhno,
J. Reid,
J. Ruan,
J. Santucci,
V. Shiltsev,
G. Stancari,
R. Thurman-Keup,
A. Valishev,
A. Warner
Abstract:
We report results of the beam commissioning and first operation of the 1.3 GHz superconducting RF electron linear accelerator at Fermilab Accelerator Science and Technology (FAST) facility. Construction of the linac was completed and the machine was commissioned with beam in 2017. The maximum total beam energy of about 300 MeV was achieved with the record energy gain of 250 MeV in the ILC-type SRF…
▽ More
We report results of the beam commissioning and first operation of the 1.3 GHz superconducting RF electron linear accelerator at Fermilab Accelerator Science and Technology (FAST) facility. Construction of the linac was completed and the machine was commissioned with beam in 2017. The maximum total beam energy of about 300 MeV was achieved with the record energy gain of 250 MeV in the ILC-type SRF cryomodule. The photoinjector was tuned to produce trains of 200 pC bunches with a frequency of 3 MHz at a repetition rate of 1 Hz. This report describes the aspects of machine commissioning such as tuning of the SRF cryomodule and beam optics optimization. We also present highlights of an experimental program carried out parasitically during the two-month run, including studies of wake-fields, and advanced beam phase space manipulation.
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
Micro-Bunched Beam Production at FAST for Narrow Band THz Generation Using a Slit-Mask
Authors:
J. Hyun,
D. Crawford,
D. Edstrom Jr.,
J. Ruan,
J. Santucci,
R. Thurman-Keup,
T. Sen,
J. C. Thangaraj
Abstract:
We discuss simulations and experiments on creating micro-bunch beams for generating narrow band THz radiation at the Fermilab Accelerator Science and Technology (FAST) facility. The low-energy electron beamline at FAST consists of a photoinjector-based RF gun, two L-band superconducting accelerating cavities, a chicane, and a beam dump. The electron bunches are lengthened with cavity phases set of…
▽ More
We discuss simulations and experiments on creating micro-bunch beams for generating narrow band THz radiation at the Fermilab Accelerator Science and Technology (FAST) facility. The low-energy electron beamline at FAST consists of a photoinjector-based RF gun, two L-band superconducting accelerating cavities, a chicane, and a beam dump. The electron bunches are lengthened with cavity phases set off-crest for better longitudinal separation and then micro-bunched with a slit-mask installed in the chicane. We carried out the experiments with 30 MeV electron beams and detected signals of the micro-bunching using a skew quadrupole magnet in the chicane. In this paper, the details of micro-bunch beam production, the detection of micro-bunching and comparison with simulations are described.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
Initial observations of micropulse elongation of electron beams in a SCRF accelerator
Authors:
A. H. Lumpkin,
R. Thurman-Keup,
D. Edstrom Jr.,
J. Ruan,
J. Santucci
Abstract:
Commissioning at the SCRF accelerator at the Fermilab Accelerator Science and Technology (FAST) Facility has included the implementation of a versatile bunch-length monitor located after the 4-dipole chicane bunch compressor for electron beam energies of 20-50 MeV and integrated charges in excess of 10 nC. The team has initially used a Hamamatsu C5680 synchroscan streak camera to assess the effect…
▽ More
Commissioning at the SCRF accelerator at the Fermilab Accelerator Science and Technology (FAST) Facility has included the implementation of a versatile bunch-length monitor located after the 4-dipole chicane bunch compressor for electron beam energies of 20-50 MeV and integrated charges in excess of 10 nC. The team has initially used a Hamamatsu C5680 synchroscan streak camera to assess the effects of space charge on the electron beam bunch lengths. An Al-coated Si screen was used to generate optical transition radiation (OTR) resulting from the beam's interaction with the screen. The chicane bypass beamline allowed the measurements of the bunch length without the compression stage at the downstream beamline location using OTR and the streak camera. We have observed electron beam bunch lengths from 5 to 16 ps (sigma) for micropulse charges of 60 pC to 800 pC, respectively. We also report a compressed sub-ps micropulse case.
△ Less
Submitted 27 December, 2017;
originally announced December 2017.
-
Notes on the design of experiments and beam diagnostics with synchrotron light detected by a gated photomultiplier for the Fermilab superconducting electron linac and for the Integrable Optics Test Accelerator (IOTA)
Authors:
Giulio Stancari,
Aleksandr Romanov,
Jinhao Ruan,
James Santucci,
Randy Thurman-Keup,
Alexander Valishev
Abstract:
We outline the design of beam experiments for the electron linac at the Fermilab Accelerator Science and Technology (FAST) facility and for the Integrable Optics Test Accelerator (IOTA), based on synchrotron light emitted by the electrons in bend dipoles, detected with gated microchannel-plate photomultipliers (MCP-PMTs). The system can be used both for beam diagnostics (e.g., beam intensity with…
▽ More
We outline the design of beam experiments for the electron linac at the Fermilab Accelerator Science and Technology (FAST) facility and for the Integrable Optics Test Accelerator (IOTA), based on synchrotron light emitted by the electrons in bend dipoles, detected with gated microchannel-plate photomultipliers (MCP-PMTs). The system can be used both for beam diagnostics (e.g., beam intensity with full dynamic range, turn-by-turn beam vibrations, etc.) and for scientific experiments, such as the direct observation of the time structure of the radiation emitted by single electrons in a storage ring. The similarity between photon pulses and spectrum at the downstream end of the electron linac and in the IOTA ring allows one to test the apparatus during commissioning of the linac.
△ Less
Submitted 8 November, 2017;
originally announced November 2017.
-
Microlens Array Laser Transverse Shaping Technique for Photoemission Electron Source
Authors:
A. Halavanau,
G. Ha,
G. Qiang,
W. Gai,
J. Power,
P. Piot,
E. Wisniewski,
D. Edstrom,
J. Ruan,
J. Santucci
Abstract:
A common issue encountered in photoemission electron sources used in electron accelerators is distortion of the laser spot due to non ideal conditions at all stages of the amplification. Such a laser spot at the cathode may produce asymmetric charged beams that will result in degradation of the beam quality due to space charge at early stages of acceleration and fail to optimally utilize the catho…
▽ More
A common issue encountered in photoemission electron sources used in electron accelerators is distortion of the laser spot due to non ideal conditions at all stages of the amplification. Such a laser spot at the cathode may produce asymmetric charged beams that will result in degradation of the beam quality due to space charge at early stages of acceleration and fail to optimally utilize the cathode surface. In this note we study the possibility of using microlens arrays to dramatically improve the transverse uniformity of the drive laser pulse on UV photocathodes at both Fermilab Accelerator Science \& Technology (FAST) facility and Argonne Wakefield Accelerator (AWA). In particular, we discuss the experimental characterization of the homogeneity and periodic patterned formation at the photocathode. Finally, we compare the experimental results with the paraxial analysis, ray tracing and wavefront propagation software.
△ Less
Submitted 6 September, 2016;
originally announced September 2016.
-
Initial experimental results of a machine learning-based temperature control system for an RF gun
Authors:
A. L. Edelen,
S. G. Biedron,
S. V. Milton,
B. E. Chase,
D. J. Crawford,
N. Eddy,
D. Edstrom Jr.,
E. R. Harms,
J. Ruan,
J. K. Santucci,
P. Stabile
Abstract:
Colorado State University (CSU) and Fermi National Accelerator Laboratory (Fermilab) have been developing a control system to regulate the resonant frequency of an RF electron gun. As part of this effort, we present initial test results for a benchmark temperature controller that combines a machine learning-based model and a predictive control algorithm. This is part of an on-going effort to devel…
▽ More
Colorado State University (CSU) and Fermi National Accelerator Laboratory (Fermilab) have been developing a control system to regulate the resonant frequency of an RF electron gun. As part of this effort, we present initial test results for a benchmark temperature controller that combines a machine learning-based model and a predictive control algorithm. This is part of an on-going effort to develop adaptive, machine learning-based tools specifically to address control challenges found in particle accelerator systems.
△ Less
Submitted 5 November, 2015;
originally announced November 2015.
-
On Flexible Web Services Composition Networks
Authors:
Chantal Cherifi,
Vincent Labatut,
Jean-François Santucci
Abstract:
The semantic Web service community develops efforts to bring semantics to Web service descriptions and allow automatic discovery and composition. However, there is no widespread adoption of such descriptions yet, because semantically defining Web services is highly complicated and costly. As a result, production Web services still rely on syntactic descriptions, key-word based discovery and predef…
▽ More
The semantic Web service community develops efforts to bring semantics to Web service descriptions and allow automatic discovery and composition. However, there is no widespread adoption of such descriptions yet, because semantically defining Web services is highly complicated and costly. As a result, production Web services still rely on syntactic descriptions, key-word based discovery and predefined compositions. Hence, more advanced research on syntactic Web services is still ongoing. In this work we build syntactic composition Web services networks with three well known similarity metrics, namely Levenshtein, Jaro and Jaro-Winkler. We perform a comparative study on the metrics performance by studying the topological properties of networks built from a test collection of real-world descriptions. It appears Jaro-Winkler finds more appropriate similarities and can be used at higher thresholds. For lower thresholds, the Jaro metric would be preferable because it detect less irrelevant relationships.
△ Less
Submitted 3 May, 2013;
originally announced May 2013.
-
Community Structure in Interaction Web Service Networks
Authors:
Chantal Cherifi,
Jean-François Santucci
Abstract:
Many real-world complex systems such as social, biological, information as well as technological systems results of a decentralized and unplanned evolution which leads to a common structuration. Irrespective of their origin, these so-called complex networks typically exhibit small-world and scale-free properties. Another common feature is their organisation into communities. In this paper, we intr…
▽ More
Many real-world complex systems such as social, biological, information as well as technological systems results of a decentralized and unplanned evolution which leads to a common structuration. Irrespective of their origin, these so-called complex networks typically exhibit small-world and scale-free properties. Another common feature is their organisation into communities. In this paper, we introduce models of interaction networks based on the composition process of syntactic and semantic Web services. An extensive experimental study conducted on a benchmark of real Web services shows that these networks possess the typical properties of complex networks (small-world, scale-free). Unlike most social networks, they are not transitive. Using a representative sample of community detection algorithms, a community structuration is revealed. The comparative evaluation of the discovered community structures shows that they are very similar in terms of content. Furthermore, the analysis performed on the community structures and on the communities themselves, leads us to conclude that their topological properties are consistent.
△ Less
Submitted 2 May, 2013;
originally announced May 2013.
-
On Topological Structure of Web Services Networks for Composition
Authors:
Chantal Cherifi,
Jean-François Santucci
Abstract:
In order to deal efficiently with the exponential growth of the Web services landscape in composition life cycle activities, it is necessary to have a clear view of its main features. As for many situations where there is a lot of interacting entities, the complex networks paradigm is an appropriate approach to analyze the interactions between the multitudes of Web services. In this paper, we pres…
▽ More
In order to deal efficiently with the exponential growth of the Web services landscape in composition life cycle activities, it is necessary to have a clear view of its main features. As for many situations where there is a lot of interacting entities, the complex networks paradigm is an appropriate approach to analyze the interactions between the multitudes of Web services. In this paper, we present and investigate the main interactions between semantic Web services models from the complex network perspective. Results show that both parameter and operation networks exhibit the main characteristics of typical real-world complex networks such as the small-world property and an inhomogeneous degree distribution. These results yield valuable insight in order to develop composition search algorithms, to deal with security threat in the composition process and on the phenomena which characterize its evolution.
△ Less
Submitted 2 May, 2013;
originally announced May 2013.
-
Web Services Dependency Networks Analysis
Authors:
Chantal Cherifi1,
Vincent Labatut,
Jean-François Santucci
Abstract:
Along with a continuously growing number of publicly available Web services (WS), we are witnessing a rapid development in semantic-related web technologies, which lead to the apparition of semantically described WS. In this work, we perform a comparative analysis of the syntactic and semantic approaches used to describe WS, from a complex network perspective. First, we extract syntactic and seman…
▽ More
Along with a continuously growing number of publicly available Web services (WS), we are witnessing a rapid development in semantic-related web technologies, which lead to the apparition of semantically described WS. In this work, we perform a comparative analysis of the syntactic and semantic approaches used to describe WS, from a complex network perspective. First, we extract syntactic and semantic WS dependency networks from a collection of publicly available WS descriptions. Then, we take advantage of tools from the complex network field to analyze them and determine their topological properties. We show WS dependency networks exhibit some of the typical characteristics observed in real-world networks, such as small world and scale free properties, as well as community structure. By comparing syntactic and semantic networks through their topological properties, we show the introduction of semantics in WS description allows modeling more accurately the dependencies between parameters, which in turn could lead to improved composition mining methods.
△ Less
Submitted 1 May, 2013;
originally announced May 2013.
-
Topological Properties of Web Services Similarity Networks
Authors:
Chantal Cherifi,
Vincent Labatut,
Jean-François Santucci
Abstract:
The number of publicly available Web services (WS) is continuously growing. To perform efficient WS discovery, it is desirable to organize the WS space. Works in this direction propose to group WS according to certain shared properties. Such groups commonly called communities are based either on similarity or on interaction between WS. In this paper we focus on the former, and propose a new networ…
▽ More
The number of publicly available Web services (WS) is continuously growing. To perform efficient WS discovery, it is desirable to organize the WS space. Works in this direction propose to group WS according to certain shared properties. Such groups commonly called communities are based either on similarity or on interaction between WS. In this paper we focus on the former, and propose a new network-based approach to extract communities from a WS collection. This process is three-stepped: first we define several similarity functions able to compare WS operations, second we use them to build so-called similarity networks, and third we identify communities under the form of specific structures in these networks. We apply our method on a collection of real-world WS and comment the resulting communities. Finally, we additionally provide an analysis and an interpretation of our similarity networks with a complex networks perspective.
△ Less
Submitted 1 May, 2013;
originally announced May 2013.
-
MATAWS: A Multimodal Approach for Automatic WS Semantic Annotation
Authors:
Cihan Aksoy,
Vincent Labatut,
Chantal Cherifi,
Jean-François Santucci
Abstract:
Many recent works aim at developing methods and tools for the processing of semantic Web services. In order to be properly tested, these tools must be applied to an appropriate benchmark, taking the form of a collection of semantic WS descriptions. However, all of the existing publicly available collections are limited by their size or their realism (use of randomly generated or resampled descript…
▽ More
Many recent works aim at developing methods and tools for the processing of semantic Web services. In order to be properly tested, these tools must be applied to an appropriate benchmark, taking the form of a collection of semantic WS descriptions. However, all of the existing publicly available collections are limited by their size or their realism (use of randomly generated or resampled descriptions). Larger and realistic syntactic (WSDL) collections exist, but their semantic annotation requires a certain level of automation, due to the number of operations to be processed. In this article, we propose a fully automatic method to semantically annotate such large WS collections. Our approach is multimodal, in the sense it takes advantage of the latent semantics present not only in the parameter names, but also in the type names and structures. Concept-to-word association is performed by using Sigma, a mapping of WordNet to the SUMO ontology. After having described in details our annotation method, we apply it to the larger collection of real-world syntactic WS descriptions we could find, and assess its efficiency.
△ Less
Submitted 1 May, 2013;
originally announced May 2013.
-
Benefits of Semantics on Web Service Composition from a Complex Network Perspective
Authors:
Chantal Cherifi,
Vincent Labatut,
Jean-François Santucci
Abstract:
The number of publicly available Web services (WS) is continuously growing, and in parallel, we are witnessing a rapid development in semantic-related web technologies. The intersection of the semantic web and WS allows the development of semantic WS. In this work, we adopt a complex network perspective to perform a comparative analysis of the syntactic and semantic approaches used to describe WS.…
▽ More
The number of publicly available Web services (WS) is continuously growing, and in parallel, we are witnessing a rapid development in semantic-related web technologies. The intersection of the semantic web and WS allows the development of semantic WS. In this work, we adopt a complex network perspective to perform a comparative analysis of the syntactic and semantic approaches used to describe WS. From a collection of publicly available WS descriptions, we extract syntactic and semantic WS interaction networks. We take advantage of tools from the complex network field to analyze them and determine their properties. We show that WS interaction networks exhibit some of the typical characteristics observed in real-world networks, such as short average distance between nodes and community structure. By comparing syntactic and semantic networks through their properties, we show the introduction of semantics in WS descriptions should improve the composition process.
△ Less
Submitted 1 May, 2013;
originally announced May 2013.
-
Analyzing Web Services Networks: a WS-NEXT Application
Authors:
Chantal Cherifi,
Jean-François Santucci
Abstract:
Web services represent a system with a huge number of units and many various and complex interactions. Complex networks as a tool for modelling and analyzing natural environments seem to be well adapted to such a complex system. To describe a set of Web services we propose three Web services network models based on the notions of dependency, interaction and similarity. Using the WS-NEXT extractor…
▽ More
Web services represent a system with a huge number of units and many various and complex interactions. Complex networks as a tool for modelling and analyzing natural environments seem to be well adapted to such a complex system. To describe a set of Web services we propose three Web services network models based on the notions of dependency, interaction and similarity. Using the WS-NEXT extractor we instantiate the models with a collection of Web services descriptions. We take advantage of complex network properties to provide an analyzis of the Web services networks. Those networks and the knowledge of their toplogical properties can be exploited for the discovery and composition processes.
△ Less
Submitted 1 May, 2013;
originally announced May 2013.
-
A Comparative Study of Web Services Composition Networks
Authors:
Chantal Cherifi,
Jean-Francois Santucci
Abstract:
Web services growth makes the composition process a hard task to solve. This numerous interacting elements can be adequately represented by a network. Discovery and composition can benefit from the knowledge of the network structure. In this paper, we investigate the topological properties of two models of syntactic and semantic Web services composition networks: dependency and interaction. Result…
▽ More
Web services growth makes the composition process a hard task to solve. This numerous interacting elements can be adequately represented by a network. Discovery and composition can benefit from the knowledge of the network structure. In this paper, we investigate the topological properties of two models of syntactic and semantic Web services composition networks: dependency and interaction. Results show that they share a similar organization characterized by the small-world property, a heavy-tailed degree distribution and a low transitivity value. Furthermore, the networks are disassortative.
△ Less
Submitted 1 May, 2013;
originally announced May 2013.
-
A Community Based Algorithm for Large Scale Web Service Composition
Authors:
Chantal Cherifi,
Yvan Rivierre,
Jean-Francois Santucci
Abstract:
Web service composition is the process of synthesizing a new composite service using a set of available Web services in order to satisfy a client request that cannot be treated by any available Web services. The Web services space is a dynamic environment characterized by a huge number of elements. Furthermore, many Web services are offering similar functionalities. In this paper we propose a mode…
▽ More
Web service composition is the process of synthesizing a new composite service using a set of available Web services in order to satisfy a client request that cannot be treated by any available Web services. The Web services space is a dynamic environment characterized by a huge number of elements. Furthermore, many Web services are offering similar functionalities. In this paper we propose a model for Web service composition designed to address the scale effect and the redundancy issue. The Web services space is represented by a two-layered network architecture. A concrete similarity network layer organizes the Web services operations into communities of functionally similar operations. An abstract interaction network layer represents the composition relationships between the sets of communities. Composition synthesis is performed by a two-phased graph search algorithm. First, the interaction network is mined in order to discover abstract solutions to the request goal. Then, the abstract compositions are instantiated with concrete operations selected from the similarity network. This strategy allows an efficient exploration of the Web services space. Furthermore, operations grouped in a community can be easily substituted if necessary during the composition's synthesis's process.
△ Less
Submitted 1 May, 2013;
originally announced May 2013.
-
Initial beam-profiling tests with the NML prototype station at the Fermilab A0 Photoinjector
Authors:
A. Lumpkin,
R. Flora,
A. S. Johnson,
J. Ruan,
J. Santucci,
V. Scarpine,
Y. -E. Sun,
R. Thurman-Keup,
M. Church,
M. Wendt
Abstract:
The beam-profile diagnostics station prototype for the superconducting rf electron linac being constructed at Fermilab at the New Muon Lab has been tested. The station uses intercepting radiation converter screens for the low-power beam mode: either a 100-μm thick YAG:Ce single crystal scintillator or a 1-μm thin Al optical transition radiation (OTR) foil. The screens are oriented with the surface…
▽ More
The beam-profile diagnostics station prototype for the superconducting rf electron linac being constructed at Fermilab at the New Muon Lab has been tested. The station uses intercepting radiation converter screens for the low-power beam mode: either a 100-μm thick YAG:Ce single crystal scintillator or a 1-μm thin Al optical transition radiation (OTR) foil. The screens are oriented with the surface perpendicular to the beam direction. A downstream mirror with its surface at 45 degrees to the beam direction is used to direct the radiation into the optical transport. The optical system has better than 20 (10) μm rms spatial resolution when covering a vertical field of view of 18 (5) mm. The initial tests were performed at the A0 Photoinjector at a beam energy of ~15 MeV and with micropulse charges from 25 to 500 pC for beam sizes of 45 to 250 microns. Example results will be presented.
△ Less
Submitted 21 August, 2012;
originally announced August 2012.
-
Upgrades of beam diagnostics in support of emittance-exchange experiments at the Fermilab A0 photoinjector
Authors:
A. H. Lumpkin,
A. S. Johnson,
J. Ruan,
J. Santucci,
Y. -E. Sun,
R. Thurman-Keup,
H. Edwards
Abstract:
The possibility of using electron beam phase space manipulations to support a free-electron laser accelerator design optimization has motivated our research. An on-going program demonstrating the exchange of transverse horizontal and longitudinal emittances at the Fermilab A0 photoinjector has benefited recently from the upgrade of several of the key diagnostics stations. Accurate measurements of…
▽ More
The possibility of using electron beam phase space manipulations to support a free-electron laser accelerator design optimization has motivated our research. An on-going program demonstrating the exchange of transverse horizontal and longitudinal emittances at the Fermilab A0 photoinjector has benefited recently from the upgrade of several of the key diagnostics stations. Accurate measurements of these properties upstream and downstream of the exchanger beamline are needed. Improvements in the screen resolution term and reduced impact of the optical system's depth-of-focus by using YAG:Ce single crystals normal to the beam direction will be described. The requirement to measure small energy spreads (<10 keV) in the spectrometer and the exchange process which resulted in bunch lengths less than 500 fs led to other diagnostics performance adjustments and upgrades as well. A longitudinal to transverse exchange example is also reported.
△ Less
Submitted 9 August, 2012;
originally announced August 2012.
-
Experimental study of coherent synchrotron radiation in the emittance exchange line at the A0-photoinjector
Authors:
Jayakar C. T. Thangaraj,
R. Thurman-Keup,
A. Johnson,
A. H. Lumpkin,
H. Edwards,
J. Ruan,
J. Santucci,
Y. E. - Sun,
M. Church,
P. Piot
Abstract:
Next generation accelerators will require a high current, low emittance beam with a low energy spread. Such accelerators will employ advanced beam conditioning systems such as emittance exchangers to manipulate high brightness beams. One of the goals of the Fermilab A0 photoinjector is to investigate the transverse to longitudinal emittance exchange principle. Coherent synchrotron radiation could…
▽ More
Next generation accelerators will require a high current, low emittance beam with a low energy spread. Such accelerators will employ advanced beam conditioning systems such as emittance exchangers to manipulate high brightness beams. One of the goals of the Fermilab A0 photoinjector is to investigate the transverse to longitudinal emittance exchange principle. Coherent synchrotron radiation could limit high current operation of the emittance exchanger. In this paper, we report on the preliminary experimental and simulation study of the coherent synchroton radiation (CSR) in the emittance exchange line at the A0 photoinjector.
△ Less
Submitted 9 February, 2012;
originally announced February 2012.
-
Generation of angular-momentum-dominated electron beams from a photoinjector
Authors:
Y. -E Sun,
P. Piot,
K. -J. Kim,
N. Barov,
S. Lidia,
J. Santucci,
R. Tikhoplav,
J. Wennerberg
Abstract:
Various projects under study require an angular-momentum-dominated electron beam generated by a photoinjector. Some of the proposals directly use the angular-momentum-dominated beams (e.g. electron cooling of heavy ions), while others require the beam to be transformed into a flat beam (e.g. possible electron injectors for light sources and linear colliders). In this paper, we report our experim…
▽ More
Various projects under study require an angular-momentum-dominated electron beam generated by a photoinjector. Some of the proposals directly use the angular-momentum-dominated beams (e.g. electron cooling of heavy ions), while others require the beam to be transformed into a flat beam (e.g. possible electron injectors for light sources and linear colliders). In this paper, we report our experimental study of an angular-momentum-dominated beam produced in a photoinjector, addressing the dependencies of angular momentum on initial conditions. We also briefly discuss the removal of angular momentum. The results of the experiment, carried out at the Fermilab/NICADD Photoinjector Laboratory, are found to be in good agreement with theoretical and numerical models.
△ Less
Submitted 6 November, 2004;
originally announced November 2004.
-
The Flat Beam Experiment at the FNAL Photoinjector
Authors:
D. Edwards,
H. Edwards,
N. Holtkamp,
S. Nagaitsev,
J. Santucci,
R. Brinkmann,
K. Desler,
K. Floettmann,
I. Bohnet,
M. Ferrario
Abstract:
A technique for production of an electron beam with a high transverse emittance ratio. a "flat" beam, has been proposed by Brinkmann, Derbenev, and Floettmann.[1] The cathode of an RF-laser gun is immersed in a solenoidal magnetic field; as a result the beam emitted from a round laser spot has a net angular momentum. Subsequent passage through a quadrupole channel that has a 90 degree difference…
▽ More
A technique for production of an electron beam with a high transverse emittance ratio. a "flat" beam, has been proposed by Brinkmann, Derbenev, and Floettmann.[1] The cathode of an RF-laser gun is immersed in a solenoidal magnetic field; as a result the beam emitted from a round laser spot has a net angular momentum. Subsequent passage through a quadrupole channel that has a 90 degree difference in phase advance between the transverse degrees of freedom results in a flat beam. Experimental study is underway at the Fermilab A0 Photoinjector. Thus far, transverse emittance ratios as high as 50 have been observed, and the results are in substantial agreement with simulation.
[1] R. Brinkmann, Ya. Derbenev, K. Floettmann, "A Flat Beam Electron Source for Linear Colliders." TESLA Note 99-09, April 1999.
△ Less
Submitted 12 August, 2000;
originally announced August 2000.