-
Reducing the error rate of a superconducting logical qubit using analog readout information
Authors:
Hany Ali,
Jorge Marques,
Ophelia Crawford,
Joonas Majaniemi,
Marc Serra-Peralta,
David Byfield,
Boris Varbanov,
Barbara M. Terhal,
Leonardo DiCarlo,
Earl T. Campbell
Abstract:
Quantum error correction enables the preservation of logical qubits with a lower logical error rate than the physical error rate, with performance depending on the decoding method. Traditional error decoding approaches, relying on the binarization (`hardening') of readout data, often ignore valuable information embedded in the analog (`soft') readout signal. We present experimental results showcas…
▽ More
Quantum error correction enables the preservation of logical qubits with a lower logical error rate than the physical error rate, with performance depending on the decoding method. Traditional error decoding approaches, relying on the binarization (`hardening') of readout data, often ignore valuable information embedded in the analog (`soft') readout signal. We present experimental results showcasing the advantages of incorporating soft information into the decoding process of a distance-three ($d=3$) bit-flip surface code with transmons. To this end, we use the $3\times3$ data-qubit array to encode each of the $16$ computational states that make up the logical state $\ket{0_{\mathrm{L}}}$, and protect them against bit-flip errors by performing repeated $Z$-basis stabilizer measurements. To infer the logical fidelity for the $\ket{0_{\mathrm{L}}}$ state, we average across the $16$ computational states and employ two decoding strategies: minimum weight perfect matching and a recurrent neural network. Our results show a reduction of up to $6.8\%$ in the extracted logical error rate with the use of soft information. Decoding with soft information is widely applicable, independent of the physical qubit platform, and could reduce the readout duration, further minimizing logical error rates.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Electrostatic tuning of bilayer graphene edge modes
Authors:
Hira Ali,
Llorenç Serra
Abstract:
We study the effect of a local potential shift induced by a side electrode on the edge modes at the boundary between gapped and ungapped bilayer graphene. A potential shift close to the gapped-ungapped boundary causes the emergence of unprotected edge modes, propagating in both directions along the boundary. These counterpropagating edge modes allow edge backscattering, as opposed to the case of v…
▽ More
We study the effect of a local potential shift induced by a side electrode on the edge modes at the boundary between gapped and ungapped bilayer graphene. A potential shift close to the gapped-ungapped boundary causes the emergence of unprotected edge modes, propagating in both directions along the boundary. These counterpropagating edge modes allow edge backscattering, as opposed to the case of valley-momentum-locked edge modes. We then calculate the conductance of a bilayer graphene wire in presence of finger-gate electrodes, finding strong asymmetries with energy inversion and deviations from conductance quantization that can be understood with the gate-induced unprotected edge modes.
△ Less
Submitted 21 September, 2023;
originally announced September 2023.
-
Noise-dependent bias in quantitative STEM-EMCD experiments revealed by bootstrapping
Authors:
Hasan Ali,
Jan Rusz,
Daniel E. Bürgler,
Roman Adam,
Claus M. Schneider,
Cheuk Wai Tai,
Thomas Thersleff
Abstract:
Electron magnetic circular dichroism (EMCD) is a powerful technique for estimating element-specific magnetic moments of materials on nanoscale with the potential to reach atomic resolution in transmission electron microscopes. However, the fundamentally weak EMCD signal strength complicates quantification of magnetic moments, as this requires very high precision, especially in the denominator of t…
▽ More
Electron magnetic circular dichroism (EMCD) is a powerful technique for estimating element-specific magnetic moments of materials on nanoscale with the potential to reach atomic resolution in transmission electron microscopes. However, the fundamentally weak EMCD signal strength complicates quantification of magnetic moments, as this requires very high precision, especially in the denominator of the sum rules. Here, we employ a statistical resampling technique known as bootstrapping to an experimental EMCD dataset to produce an empirical estimate of the noise dependent error distribution resulting from application of EMCD sum rules to bcc iron in a 3 beam orientation. We observe clear experimental evidence that noisy EMCD signals preferentially bias the estimation of magnetic moments, further supporting this with error distributions produced by Monte-Carlo simulations. Finally, we propose guidelines for the recognition and minimization of this bias in the estimation of magnetic moments.
△ Less
Submitted 19 September, 2023; v1 submitted 27 June, 2023;
originally announced June 2023.
-
Evolution of ferroelectricity with annealing temperature and thickness in sputter deposited undoped HfO$_2$ on silicon
Authors:
Md Hanif Ali,
Adityanarayan Pandey,
Rowtu Srinu,
Paritosh Meihar,
Shubham Patil,
Sandip Lashkare,
Udayan Ganguly
Abstract:
Ferroelectricity in sputtered undoped-HfO$_2$ is attractive for composition control for low power and non-volatile memory and logic applications. Unlike doped HfO$_2$, evolution of ferroelectricity with annealing and film thickness effect in sputter deposited undoped HfO$_2$ on Si is not yet reported. In present study, we have demonstrated the impact of post metallization annealing temperature and…
▽ More
Ferroelectricity in sputtered undoped-HfO$_2$ is attractive for composition control for low power and non-volatile memory and logic applications. Unlike doped HfO$_2$, evolution of ferroelectricity with annealing and film thickness effect in sputter deposited undoped HfO$_2$ on Si is not yet reported. In present study, we have demonstrated the impact of post metallization annealing temperature and film thickness on ferroelectric properties in dopant-free sputtered HfO$_2$ on Si-substrate. A rich correlation of polarization with phase, lattice constant, and crystallite size and interface reaction is observed. First, anneal temperature shows o-phase saturation beyond 600 oC followed by interface reaction beyond 700 oC to show an optimal temperature window on 600-700 oC. Second, thickness study at the optimal temperature window shows an alluring o-phase crystallite scaling with thickness till a critical thickness of 20 nm indicating that the films are completely o-phase. However, the lattice constants (volume) are high in the 15-20 nm thickness range which correlates with the enhanced value of 2Pr. Beyond 20 nm, crystallite scaling with thickness saturates with the correlated appearance of m-phase and reduction in 2Pr. The optimal thickness-temperature window range of 15-20 nm films annealed at 600-700 oC show 2Pr of ~35.5 micro-C/cm$^2$ is comparable to state-of-the-art. The robust wakeup-free endurance of ~$10^$8 cycles showcased in the promising temperature-thickness window has been identified systematically for non-volatile memory applications.
△ Less
Submitted 25 April, 2023;
originally announced April 2023.
-
Material-Geometry Interplay in Damping of Biomimetic Scale Beams
Authors:
Hossein Ebrahimi,
Milos Krsmanovic,
Hessein Ali,
Ranajay Ghosh
Abstract:
Biomimetic scale-covered substrates are architected meta-structures exhibiting fascinating emergent nonlinearities via the geometry of collective scales contacts. In spite of much progress in understanding their elastic nonlinearity, their dissipative behavior arising from scales sliding is relatively uninvestigated in the dynamic regime. Recently discovered is the phenomena of viscous emergence,…
▽ More
Biomimetic scale-covered substrates are architected meta-structures exhibiting fascinating emergent nonlinearities via the geometry of collective scales contacts. In spite of much progress in understanding their elastic nonlinearity, their dissipative behavior arising from scales sliding is relatively uninvestigated in the dynamic regime. Recently discovered is the phenomena of viscous emergence, where dry Coulomb friction between scales can lead to apparent viscous damping behavior of the overall multi-material substrate. In contrast to this structural dissipation, material dissipation common in many polymers has never been considered, especially synergestically with geometrical factors. This is addressed here for the first time, where material visco-elasticity is introduced via a simple Kelvin-Voigt model for brevity and clarity. The results contrast the two damping sources in these architectured systems: material viscoelasticity, and geometrical frictional scales contact. It is discovered that although topically similar in effective damping, viscoelsatic damping follows a different damping envelope than dry friction, including starkly different effects on damping symmetry and specific damping capacity.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
Post-fabrication frequency trimming of coplanar-waveguide resonators in circuit QED quantum processors
Authors:
S. Vallés-Sanclemente,
S. L. M. van der Meer,
M. Finkel,
N. Muthusubramanian,
M. Beekman,
H. Ali,
J. F. Marques,
C. Zachariadis,
H. M. Veen,
T. Stavenga,
N. Haider,
L. DiCarlo
Abstract:
We present the use of grounding airbridge arrays to trim the frequency of microwave coplanar-waveguide (CPW) resonators post fabrication. This method is compatible with the fabrication steps of conventional CPW airbridges and crossovers and increases device yield by allowing compensation of design and fabrication uncertainty with $100~\mathrm{MHz}$ range and $10~\mathrm{MHz}$ resolution. We showca…
▽ More
We present the use of grounding airbridge arrays to trim the frequency of microwave coplanar-waveguide (CPW) resonators post fabrication. This method is compatible with the fabrication steps of conventional CPW airbridges and crossovers and increases device yield by allowing compensation of design and fabrication uncertainty with $100~\mathrm{MHz}$ range and $10~\mathrm{MHz}$ resolution. We showcase two applications in circuit QED. The first is elimination of frequency crowding between resonators intended to readout different transmons by frequency-division multiplexing. The second is frequency matching of readout and Purcell-filter resonator pairs. Combining this matching with transmon frequency trimming by laser annealing reliably achieves fast and high-fidelity readout across 17-transmon quantum processors.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
All-microwave leakage reduction units for quantum error correction with superconducting transmon qubits
Authors:
J. F. Marques,
H. Ali,
B. M. Varbanov,
M. Finkel,
H. M. Veen,
S. L. M. van der Meer,
S. Valles-Sanclemente,
N. Muthusubramanian,
M. Beekman,
N. Haider,
B. M. Terhal,
L. DiCarlo
Abstract:
Minimizing leakage from computational states is a challenge when using many-level systems like superconducting quantum circuits as qubits. We realize and extend the quantum-hardware-efficient, all-microwave leakage reduction unit (LRU) for transmons in a circuit QED architecture proposed by Battistel et al. This LRU effectively reduces leakage in the second- and third-excited transmon states with…
▽ More
Minimizing leakage from computational states is a challenge when using many-level systems like superconducting quantum circuits as qubits. We realize and extend the quantum-hardware-efficient, all-microwave leakage reduction unit (LRU) for transmons in a circuit QED architecture proposed by Battistel et al. This LRU effectively reduces leakage in the second- and third-excited transmon states with up to $99\% $ efficacy in $220~\mathrm{ns}$, with minimum impact on the qubit subspace. As a first application in the context of quantum error correction, we demonstrate the ability of multiple simultaneous LRUs to reduce the error detection rate and to suppress leakage buildup within $1\%$ in data and ancilla qubits over 50 cycles of a weight-2 parity measurement.
△ Less
Submitted 22 March, 2023; v1 submitted 20 February, 2023;
originally announced February 2023.
-
Interlayer-engineered local epitaxial templating induced enhancement in polarization (2P$_r$ > 70$μ$C/cm$^2$) in Hf$_{0.5}$Zr$_{0.5}$O$_2$ thin films
Authors:
Srinu Rowtu,
Paritosh Meihar,
Adityanarayan Pandey,
Md. Hanif Ali,
Sandip Lashkare,
Udayan Ganguly
Abstract:
In this work, we report a high remnant polarization, 2Pr >70$μ$C/cm$^2$ in thermally processed atomic layer deposited Hf0.5Zr0.5O2 (HZO) film on Silicon with NH3 plasma exposed thin TiN interlayer and Tungsten (W) as a top electrode. The effect of interlayer on the ferroelectric properties of HZO is compared with standard Metal-Ferroelectric-Metal and Metal-Ferroelectric-Semiconductor structures.…
▽ More
In this work, we report a high remnant polarization, 2Pr >70$μ$C/cm$^2$ in thermally processed atomic layer deposited Hf0.5Zr0.5O2 (HZO) film on Silicon with NH3 plasma exposed thin TiN interlayer and Tungsten (W) as a top electrode. The effect of interlayer on the ferroelectric properties of HZO is compared with standard Metal-Ferroelectric-Metal and Metal-Ferroelectric-Semiconductor structures. X-Ray Diffraction shows that the Orthorhombic (o) phase increases as TiN is thinned. However, the strain in the o-phase is highest at 2 nm TiN and then relaxes significantly for the no-TiN case. HRTEM images reveal that the ultra-thin TiN acts as a seed layer for the local epitaxy in HZO potentially increasing the strain to produce a 2X improvement in the remnant polarization. Finally, the HZO devices are shown to be wake-up-free, and exhibit endurance >10^6 cycles. This study opens a pathway to achieve epitaxial ferroelectric HZO films on Si with improved memory performance.
△ Less
Submitted 1 June, 2023; v1 submitted 9 December, 2022;
originally announced December 2022.
-
Single scan STEM-EMCD in 3-beam orientation using a quadruple aperture
Authors:
Hasan Ali,
Sharath Kumar Manjeshwar Sathyanath,
Cheuk-Wai Tai,
Jan Rusz,
Toni Uusimaki,
Björgvin Hjörvarsson,
Thomas Thersleff,
Klaus Leifer
Abstract:
The need to acquire multiple angle-resolved electron energy loss spectra (EELS) is one of the several critical challenges associated with electron magnetic circular dichroism (EMCD) experiments. If the experiments are performed by scanning a nanometer to atomic-sized electron probe on a specific region of a sample, the precision of the local magnetic information extracted from such data highly dep…
▽ More
The need to acquire multiple angle-resolved electron energy loss spectra (EELS) is one of the several critical challenges associated with electron magnetic circular dichroism (EMCD) experiments. If the experiments are performed by scanning a nanometer to atomic-sized electron probe on a specific region of a sample, the precision of the local magnetic information extracted from such data highly depends on the accuracy of the spatial registration between multiple scans. For an EMCD experiment in a 3-beam orientation, this means that the same specimen area must be scanned four times while keeping all the experimental conditions same. This is a non-trivial task as there is a high chance of morphological and chemical modification as well as non-systematic local orientation variations of the crystal between the different scans due to beam damage, contamination and spatial drift. In this work, we employ a custom-made quadruple aperture to acquire the four EELS spectra needed for the EMCD analysis in a single electron beam scan, thus removing the above-mentioned complexities. We demonstrate a quantitative EMCD result for a beam convergence angle corresponding to sub-nm probe size and compare the EMCD results for different detector geometries.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
Enhanced spin-mechanical interaction with levitated micromagnets
Authors:
Xue-Feng Pan,
Xin-Lei Hei,
Xing-Liang Dong,
Jia-Qiang Chen,
Cai-Peng Shen,
Hamad Ali,
Peng-Bo Li
Abstract:
Spin-mechanical hybrid systems have been widely used in quantum information processing. However, the spin-mechanical interaction is generally weak, making it a critical challenge to enhance the spin-mechanical interaction into the strong coupling or even ultra-strong coupling regime. Here, we propose a protocol that can significantly enhance the spin-mechanical coupling strength with a diamond spi…
▽ More
Spin-mechanical hybrid systems have been widely used in quantum information processing. However, the spin-mechanical interaction is generally weak, making it a critical challenge to enhance the spin-mechanical interaction into the strong coupling or even ultra-strong coupling regime. Here, we propose a protocol that can significantly enhance the spin-mechanical coupling strength with a diamond spin vacancy and a levitated micromagnet. A driving electrical current is used to modulate the mechanical motion of the levitated micromagnet, which induces a two-phonon drive and can exponentially enhance the spin-phonon and phonon-medicated spin-spin coupling strengths. Furthermore, a high fidelity Schrodinger cat state and an unconventional 2-qubit geometric phase gate with high fidelity and faster gate speed can be achieved using this hybrid system. This protocol provides a promising platform for quantum information processing with NV spins coupled to levitated micromagnets.
△ Less
Submitted 12 October, 2022; v1 submitted 10 October, 2022;
originally announced October 2022.
-
Logical-qubit operations in an error-detecting surface code
Authors:
J. F. Marques,
B. M. Varbanov,
M. S. Moreira,
H. Ali,
N. Muthusubramanian,
C. Zachariadis,
F. Battistel,
M. Beekman,
N. Haider,
W. Vlothuizen,
A. Bruno,
B. M. Terhal,
L. DiCarlo
Abstract:
We realize a suite of logical operations on a distance-two logical qubit stabilized using repeated error detection cycles. Logical operations include initialization into arbitrary states, measurement in the cardinal bases of the Bloch sphere, and a universal set of single-qubit gates. For each type of operation, we observe higher performance for fault-tolerant variants over non-fault-tolerant vari…
▽ More
We realize a suite of logical operations on a distance-two logical qubit stabilized using repeated error detection cycles. Logical operations include initialization into arbitrary states, measurement in the cardinal bases of the Bloch sphere, and a universal set of single-qubit gates. For each type of operation, we observe higher performance for fault-tolerant variants over non-fault-tolerant variants, and quantify the difference through detailed characterization. In particular, we demonstrate process tomography of logical gates, using the notion of a logical Pauli transfer matrix. This integration of high-fidelity logical operations with a scalable scheme for repeated stabilization is a milestone on the road to quantum error correction with higher-distance superconducting surface codes.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
-
Effect of bed temperature on solute segregation and mechanical properties in Ti-6Al-4V produced by selective laser melting
Authors:
S. Pedrazzini,
M. E. Pek,
A. K. Ackerman,
Q. Cheng,
H. Ali,
H. Ghadbeigi,
K. Mumtaz,
T. Dessolier,
T. B. Britton,
P. Bajaj,
E. Jägle,
B. Gault,
A. J. London,
E. Galindo-Nava
Abstract:
Advanced characterisation techniques were used on LPBF Ti-6Al-4V samples produced on a heated base plate. When the substrate temperature is 100°C the elongation is 6\%, which increases and peaks at 10\% at 570°C, then sharply decreases to zero ductility at 770°C. At 100°C, a heavily strained and twinned microstructure, primarily composed of α+α', was observed and it was comparable to asbuilt micro…
▽ More
Advanced characterisation techniques were used on LPBF Ti-6Al-4V samples produced on a heated base plate. When the substrate temperature is 100°C the elongation is 6\%, which increases and peaks at 10\% at 570°C, then sharply decreases to zero ductility at 770°C. At 100°C, a heavily strained and twinned microstructure, primarily composed of α+α', was observed and it was comparable to asbuilt microstructures obtained by conventional LPBF methods. At higher temperatures, twins are no longer present and instead nano-scale β precipitates are observed within α' and α, as well as dislocation networks (570°C) and tangles (770°C). Solute segregation at crystal defects was observed in all pre-heating conditions. Al and V segregation at microtwins was observed in the 100°C sample, reporting for the first time `selective' and mutually exclusive Al- and V-rich regions forming in adjacent twins. V segregation at dislocations was observed in the 570°C and 770°C samples, consistent with the higher preheating temperatures. High O contents were measured in all samples but with apparent opposing effects. At 100°C and 570°C was estimated to be below the critical threshold for O embrittlement and locally aids in maintaining a strength high by solid solution strengthening, whereas at 770°C it was above the threshold, therefore failing in a brittle fashion. Based on these observations, the initial increase in ductility from 100°C to 570°C is attributed to a reduction in microtwins and the dislocation networks acting as `soft barriers' for slip within a coarser microstructure. The lack of ductility at 770°C was attributed to local solute redistribution causing dislocation pinning and an increase of O content in this sample.
△ Less
Submitted 1 December, 2020; v1 submitted 15 June, 2020;
originally announced June 2020.
-
Coulomb friction in twisting of biomimetic scale-covered substrate
Authors:
Hossein Ebrahimi,
Hessein Ali,
Ranajay Ghosh
Abstract:
Biomimetic scale-covered substrates provide geometric tailorability via scale orientation, spacing and also interfacial properties of contact in various deformation modes. No work has investigated the effect of friction in twisting deformation of biomimetic scale-covered beams. In this work, we investigate the frictional effects in the biomimetic scale-covered structure by developing an analytical…
▽ More
Biomimetic scale-covered substrates provide geometric tailorability via scale orientation, spacing and also interfacial properties of contact in various deformation modes. No work has investigated the effect of friction in twisting deformation of biomimetic scale-covered beams. In this work, we investigate the frictional effects in the biomimetic scale-covered structure by developing an analytical model verified by the finite element simulations. In this model, we consider dry (Coulomb) friction between rigid scales surfaces, and the substrate as the linear elastic rectangular beam. The obtained results show that the friction has a dual contribution on the system by advancing the locking mechanism due to change of mechanism from purely kinematic to interfacial behavior, and stiffening the twist response due to increase the engagement forces. We also discovered, by increasing the coefficient of friction using engineering scale surfaces to a critical coefficient, the system could reach to an instantaneous post-engagement locking. The developed model outlines analytical relationships between geometry, deformation, frictional force and kinematic energy, to design biomimetic scale-covered metamaterials for a wide range of application.
△ Less
Submitted 29 January, 2020;
originally announced January 2020.
-
Simultaneous mapping of EMCD signals and crystal orientations in a transmission electron microscope
Authors:
Hasan Ali,
Jan Rusz,
Tobias Warnatz,
Björgvin Hjörvarsson,
Klaus Leifer
Abstract:
When magnetic properties are analysed in a TEM using the technique of electron magnetic circular dichroism (EMCD), one of the critical parameters is the sample orientation, and this, independently on the chosen acquisition geometry. Since small orientation changes can have a strong impact on the EMCD measurement, it is experimentally non trivial to measure the EMCD signal as a function of sample o…
▽ More
When magnetic properties are analysed in a TEM using the technique of electron magnetic circular dichroism (EMCD), one of the critical parameters is the sample orientation, and this, independently on the chosen acquisition geometry. Since small orientation changes can have a strong impact on the EMCD measurement, it is experimentally non trivial to measure the EMCD signal as a function of sample orientation. The classical EMCD experimental setup requires to tilt the crystal in a 2 beam orientation and to acquire two electron energy loss spectra at two conjugate scattering angles. The effect of a mistilt from the perfect 2-beam orientation on the measured EMCD signals has not been explored yet due to different experimental constraints. In order to maintain the exact sample location and orientation for the acquisition of the EMCD signal, we have developed a methodology to simultaneously map the quantitative EMCD signals and the local orientation of the crystal. We analyse, both experimentally and with simulations, how the measured magnetic signals evolve with a change in the crystal tilt from the exact 2-beam orientation. Based on this analysis, we establish an accurate relationship between the crystal orientations and the EMCD signals. Our results demonstrate that a small crystal tilt away from the 2-beam orientation can significantly alter the strength and the distribution of the EMCD signals. From an optimisation of the crystal orientation, we obtain quantitative EMCD measurements.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Enabling atomic resolution in convergent beam EMCD measurements by the use of patterned apertures
Authors:
Hasan Ali,
Devendra Negi,
Tobias Warnatz,
Björgvin Hjörvarsson,
Jan Rusz,
Klaus Leifer
Abstract:
We give an experimental demonstration of two types of recently proposed ventilator apertures which can be used to acquire electron magnetic circular dichroic (EMCD) signals in zone axis orientation with high spatial resolution. To simplify the experimental procedures, we propose a third type of aperture and experimentally demonstrate the use of this modified ventilator aperture for the case of mul…
▽ More
We give an experimental demonstration of two types of recently proposed ventilator apertures which can be used to acquire electron magnetic circular dichroic (EMCD) signals in zone axis orientation with high spatial resolution. To simplify the experimental procedures, we propose a third type of aperture and experimentally demonstrate the use of this modified ventilator aperture for the case of multiple symmetries in the diffraction patterns. To show the feasibility of the atomic resolution EMCD, EMCD signals are acquired for a range of beam convergence angles. High quality EMCD signals with convergence angles corresponding to atomic resolution electron probes are obtained.
△ Less
Submitted 30 August, 2019;
originally announced August 2019.
-
Large g factor in bilayer WS$_2$ flakes
Authors:
Sibai Sun,
Yang Yu,
Jianchen Dang,
Kai Peng,
Xin Xie,
Feilong Song,
Chenjiang Qian,
Shiyao Wu,
Hassan Ali,
Jing Tang,
Jingnan Yang,
Shan Xiao,
Shilu Tian,
Meng Wang,
Xinyan Shan,
M. A. Rafiq,
Can Wang,
Xiulai Xu
Abstract:
The valley of transition metal dichalcogenides provides an additional platform to manipulate spin due to its unique selection rule. Normally, intralayer optical transitions in magnetic field show a Zeeman splitting with g factor of about $-4$. Here we report remarkable valley Zeeman effect exhibited by splitting of excitonic emission in a bilayer WS$_{2}$, with a value of g factor as large as…
▽ More
The valley of transition metal dichalcogenides provides an additional platform to manipulate spin due to its unique selection rule. Normally, intralayer optical transitions in magnetic field show a Zeeman splitting with g factor of about $-4$. Here we report remarkable valley Zeeman effect exhibited by splitting of excitonic emission in a bilayer WS$_{2}$, with a value of g factor as large as $-16.5$. The observed large g factor results from the interlayer recombination, as the conduction band and valence band are modified in opposite directions by magnetic field in different layers. The interlayer recombination is due to the defect induced inversion symmetry breaking, which is theoretically not accessible in ideal bilayer WS$_{2}$ with inversion symmetry. Large g factor of interlayer emission offers potential benefits for future optical spin control and detection.
△ Less
Submitted 21 March, 2019;
originally announced March 2019.
-
Frictional Damping in Biomimetic Scale Beam Oscillations
Authors:
Hessein Ali,
Hossein Ebrahimi,
Ranajay Ghosh
Abstract:
Stiff scales adorn the exterior surfaces of fishes, snakes, and many reptiles. They provide protection from external piercing attacks and control over global deformation behavior to aid locomotion, slithering, and swimming across a wide range of environmental condition. In this letter, we investigate the dynamic behavior of biomimetic scale substrates for further understanding the origins of the n…
▽ More
Stiff scales adorn the exterior surfaces of fishes, snakes, and many reptiles. They provide protection from external piercing attacks and control over global deformation behavior to aid locomotion, slithering, and swimming across a wide range of environmental condition. In this letter, we investigate the dynamic behavior of biomimetic scale substrates for further understanding the origins of the nonlinearity that involve various aspect of scales interaction, sliding kinematics, interfacial friction, and their combination. Particularly, we study the vibrational characteristics through an analytical model and numerical investigations for the case of a simply supported scale covered beam. Our results reveal for the first time that biomimetic scale beams exhibit viscous damping behavior even when only Coulomb friction is postulated for free vibrations. We anticipate and quantify the anisotropy in the damping behavior with respect to curvature. We also find that unlike static pure bending where friction increases bending stiffness, a corresponding increase in natural frequency for the dynamic case does not arise for simply supported beam. Since both scale geometry, distribution and interfacial properties can be easily tailored, our study indicates a biomimetic strategy to design exceptional synthetic materials with tailorable damping behavior.
△ Less
Submitted 15 March, 2019;
originally announced March 2019.
-
Tailorable Elasticity of Cantilever Using Spatio-Angular Functionally Graded Biomimetic Scales
Authors:
Hessein Ali,
Hossein Ebrahimi,
Ranajay Ghosh
Abstract:
Cantilevered beams are of immense importance as structural and sensorial members for a number of applications. Endowing tailorable elasticity can have wide ranging engineering ramification. Such tailorability could be possible using some type of spatial gradation in the beam's material or cross section. However, these often require extensive additive and subtractive material processing or speciali…
▽ More
Cantilevered beams are of immense importance as structural and sensorial members for a number of applications. Endowing tailorable elasticity can have wide ranging engineering ramification. Such tailorability could be possible using some type of spatial gradation in the beam's material or cross section. However, these often require extensive additive and subtractive material processing or specialized casts. In this letter, we demonstrate an alternative bio inspired mechanical pathway, which is based on exploiting the nonlinearity that would arise from a functionally graded distribution of biomimetic scales on the surface using an analytical approach. This functional gradation is geometrically sourced and could arise from either spatial or angular gradation of scales. We analyze such a functionally graded cantilever beam under uniform loading. In comparison with uniformly distributed scales, we find significant differences in bending stiffness for both spatial and angular gradations. Spatial and angular functional gradation share some universality but also sharp contrasts in their effect on the underlying beam. A combination of both types of gradation in the structure can be used to alternatively increase or decrease stiffness and therefore a pathway to tailor the elasticity of a cantilever beam relatively easily. These results give rise to an architected framework for designing and optimizing the topography of leveraged solids.
△ Less
Submitted 24 October, 2018;
originally announced October 2018.
-
Tailorable Twisting of Biomimetic Scale-Covered Substrate
Authors:
Hossein Ebrahimi,
Hessein Ali,
Ryan Alexander Horton,
Jonathan Galvez,
Ali Gordon,
Ranajay Ghosh
Abstract:
In this letter, we investigate the geometrically tailorable elasticity in the twisting behavior of biomimetic scale-covered slender soft substrate. Motivated by our qualitative experiments showing a significant torsional rigidity increase, we develop an analytical model and carry out extensive finite element (FE) simulations to validate our model. We discover a regime differentiated and reversible…
▽ More
In this letter, we investigate the geometrically tailorable elasticity in the twisting behavior of biomimetic scale-covered slender soft substrate. Motivated by our qualitative experiments showing a significant torsional rigidity increase, we develop an analytical model and carry out extensive finite element (FE) simulations to validate our model. We discover a regime differentiated and reversible mechanical response straddling linear, nonlinear, and rigid behavior. The response is highly tailorable through the geometric arrangement and orientation of the scales. The work outlines analytical relationships between geometry, deformation modes and kinematics, which can be used for designing biomimetic scale-covered metamaterials.
△ Less
Submitted 29 October, 2018; v1 submitted 4 September, 2018;
originally announced September 2018.
-
Bending of Biomimetic Scale Covered Beams Under Discrete Non-periodic Engagement
Authors:
Hessein Ali,
Hossein Ebrahimi,
Ranajay Ghosh
Abstract:
Covering elastic substrates with stiff biomimetic scales significantly alters the bending behavior via scales engagement. This engagement is the dominant source of nonlinearity in small deflection regime. As deformation proceeds, an initially linear bending response gives way to progressive stiffening and thereafter a geometrically dictated 'locked' configuration. However, investigation of this sy…
▽ More
Covering elastic substrates with stiff biomimetic scales significantly alters the bending behavior via scales engagement. This engagement is the dominant source of nonlinearity in small deflection regime. As deformation proceeds, an initially linear bending response gives way to progressive stiffening and thereafter a geometrically dictated 'locked' configuration. However, investigation of this system has been carried out until date using assumption of periodic engagement even after scales contact. This is true only under the most ideal loading conditions or if the scales are extremely dense akin to a continuum assumption on the scales. However, this is not true for a practical system where scales are more discrete and where loading can alter periodicity of engagement. We address this nonlinear problem for the first time in small deflection and rotation regime. Our combined modeling and numerical analysis show that relaxing periodicity better represents the geometry of discrete scales engagement and mechanics of the beam under general loading conditions and allows us to revisit the nonlinear behavior. We report significant differences from predictions of periodic models in terms of predicting the behavior of scales after engagement. These include the difference in the angular displacement of scales, normal force magnitudes along the length, moment curvature relationship as well as a distinct nature of the locking behavior. Therefore, non-periodicity is an important yet unexplored feature of this problem, which leads to insights, absent in previous investigations. This opens way for developing the structure-property-architecture framework for design and optimization of these topologically leveraged solids.
△ Less
Submitted 29 June, 2018;
originally announced July 2018.
-
High-Responsivity Photodetection by Self-Catalyzed Phase-Pure P-GaAs Nanowire
Authors:
Hassan Ali,
Yunyan Zhang,
Jing Tang,
Kai Peng,
Sibai Sun,
Yue Sun,
Feilong Song,
Attia Falak,
Shiyao Wu,
Chenjiang Qian,
Meng Wang,
Zhanchun Zuo,
Kui-Juan Jin,
Ana M. Sanchez,
Huiyun Liu,
Xiulai Xu
Abstract:
Defects are detrimental for optoelectronics devices, such as stacking faults can form carrier-transportation barriers, and foreign impurities (Au) with deep-energy levels can form carrier traps and non-radiative recombination centers. Here, we first developed self-catalyzed p-type GaAs nanowires (NWs) with pure zinc blende (ZB) structure, and then fabricated photodetector made by these NWs. Due to…
▽ More
Defects are detrimental for optoelectronics devices, such as stacking faults can form carrier-transportation barriers, and foreign impurities (Au) with deep-energy levels can form carrier traps and non-radiative recombination centers. Here, we first developed self-catalyzed p-type GaAs nanowires (NWs) with pure zinc blende (ZB) structure, and then fabricated photodetector made by these NWs. Due to absence of stacking faults and suppression of large amount of defects with deep energy levels, the photodetector exhibits room-temperature high photo responsivity of 1.45 x 105 A W^-1 and excellent specific detectivity (D*) up to 1.48 x 10^14 Jones for low-intensity light signal of wavelength 632.8 nm, which outperforms previously reported NW-based photodetectors. These results demonstrate that these self-catalyzed pure-ZB GaAs NWs to be promising candidates for optoelectronics applications.
△ Less
Submitted 19 April, 2018;
originally announced April 2018.
-
High-Q microcavity enhanced optical properties of CuInS$_{2}$/ZnS colloidal quantum dots towards non-photodegradation
Authors:
Yue Sun,
Feilong Song,
Chenjiang Qian,
Kai Peng,
Sibai Sun,
Yanhui Zhao,
Zelong Bai,
Jing Tang,
Shiyao Wu,
Hassan Ali,
Fang Bo,
Haizheng Zhong,
Kuijuan Jin,
Xiulai Xu
Abstract:
We report on a temporal evolution of photoluminescence (PL) spectroscopy of CuInS$_{2}$/ZnS colloidal quantum dots (QDs) by drop-casting on SiO$_{2}$/Si substrates and high quality factor microdisks (MDs) under different atmospheric conditions. Fast PL decay, peak blueshift and linewidth broadening due to photooxidation have been observed at low excitation power. With further increasing of the exc…
▽ More
We report on a temporal evolution of photoluminescence (PL) spectroscopy of CuInS$_{2}$/ZnS colloidal quantum dots (QDs) by drop-casting on SiO$_{2}$/Si substrates and high quality factor microdisks (MDs) under different atmospheric conditions. Fast PL decay, peak blueshift and linewidth broadening due to photooxidation have been observed at low excitation power. With further increasing of the excitation power, the PL peak position shows a redshift and linewidth becomes narrow, which is ascribed to the enhanced F$\ddot{o}$rster resonant energy transfer between different QDs by photoinduced agglomeration. The oxygen plays an important role in optically induced PL decay which is verified by reduced photobleaching effect in vacuum. When the QDs drop-casted on MDs, photooxidation and photobleaching are accelerated because the excitation efficiency is greatly enhanced with coupling the pumping laser with the cavity modes. However, when the emitted photons couple with cavity modes, a PL enhancement by more than 20 times is achieved because of the increased extraction efficiency and Purcell effects of MDs at room temperature (RT), and 35 times at 20 K. The photobleaching can be avoided with a small excitation power but with a strong PL intensity by taking advantages of high quality factor cavities. The high efficient PL emission without photodegradation is very promising for using CuInS$_{2}$ QDs as high efficient photon emitters at RT, where the photodegradation has always been limiting the practical applications of colloidal quantum dots.
△ Less
Submitted 13 January, 2017;
originally announced January 2017.
-
Recombination processes in CuInS$_{2}$/ZnS Nanocrystals during steady-state photoluminescence
Authors:
Yue Sun,
Chenjiang Qian,
Kai Peng,
Zelong Bai,
Jing Tang,
Yanhui Zhao,
Shiyao Wu,
Hassan Ali,
Feilong Song,
Haizheng Zhong,
Xiulai Xu
Abstract:
We report on temperature- and excitation-power-dependent photoluminescence (PL) study of CuInS$_{2}$/ZnS nanocrystals dispersed on a SiO$_{2}$/Si substrate with a confocal micro-PL system. With increasing the excitation power at 22 K and room temperature, the PL spectra are blue-shifted because of the state filling. At low temperature, a small peak is observed at the low energy side of the spectru…
▽ More
We report on temperature- and excitation-power-dependent photoluminescence (PL) study of CuInS$_{2}$/ZnS nanocrystals dispersed on a SiO$_{2}$/Si substrate with a confocal micro-PL system. With increasing the excitation power at 22 K and room temperature, the PL spectra are blue-shifted because of the state filling. At low temperature, a small peak is observed at the low energy side of the spectrum, which could be due to the F$\ddot{o}$rster resonance energy transfer between different nanocrystals. The integrated PL intensity increases sublinearly as a function of excitation power with a power factor of around 2/3, which demonstrates the Auger recombination dominated process in the nanocrystals, especially under the high excitation power.
△ Less
Submitted 25 January, 2016;
originally announced January 2016.
-
Observation of coupling between zero- and two-dimensional semiconductor systems based on anomalous diamagnetic effects
Authors:
Shuo Cao,
Jing Tang,
Yue Sun,
Kai Peng,
Yunan Gao,
Yanhui Zhao,
Chenjiang Qian,
Sibai Sun,
Hassan Ali,
Yuting Shao,
Shiyao Wu,
Feilong Song,
David A. Williams,
Weidong Sheng,
Kuijuan Jin,
Xiulai Xu
Abstract:
We report the direct observation of coupling between a single self-assembled InAs quantum dot and a wetting layer, based on strong diamagnetic shifts of many-body exciton states using magneto-photoluminescence spectroscopy. An extremely large positive diamagnetic coefficient is observed when an electron in the wetting layer combines with a hole in the quantum dot; the coefficient is nearly one ord…
▽ More
We report the direct observation of coupling between a single self-assembled InAs quantum dot and a wetting layer, based on strong diamagnetic shifts of many-body exciton states using magneto-photoluminescence spectroscopy. An extremely large positive diamagnetic coefficient is observed when an electron in the wetting layer combines with a hole in the quantum dot; the coefficient is nearly one order of magnitude larger than that of the exciton states confined in the quantum dots. Recombination of electrons with holes in a quantum dot of the coupled system leads to an unusual negative diamagnetic effect, which is five times stronger than that in a pure quantum dot system. This effect can be attributed to the expansion of the wavefunction of remaining electrons in the wetting layer or the spread of electrons in the excited states of the quantum dot to the wetting layer after recombination. In this case, the wavefunction extent of the final states in the quantum dot plane is much larger than that of the initial states because of the absence of holes in the quantum dot to attract electrons. The properties of emitted photons that depend on the large electron wavefunction extents in the wetting layer indicate that the coupling occurs between systems of different dimensionality, which is also verified from the results obtained by applying a magnetic field in different configurations. This study paves a new way to observe hybrid states with zero- and two-dimensional structures, which could be useful for investigating the Kondo physics and implementing spin-based solid-state quantum information processing.
△ Less
Submitted 7 December, 2015;
originally announced December 2015.