Showing 1–50 of 52 results for author: Kargar, F

Solution-Processed Inks with Fillers of NbS$_3$ Quasi-One-Dimensional Charge-Density-Wave Material

Authors: Tekwam Geremew, Maedeh Taheri, Nicholas Sesing, Subhajit Ghosh, Fariborz Kargar, Tina T. Salguero, Alexander A. Balandin

Abstract: We report on the solution processing and testing of electronic ink comprised of quasi-one-dimensional NbS$_3$ charge-density-wave fillers. The ink was prepared by liquid-phase exfoliation of NbS$_3$ crystals into high-aspect ratio quasi-1D fillers dispersed in a mixture of isopropyl alcohol and ethylene glycol solution. The results of the electrical measurements of two-terminal electronic test str… ▽ More We report on the solution processing and testing of electronic ink comprised of quasi-one-dimensional NbS$_3$ charge-density-wave fillers. The ink was prepared by liquid-phase exfoliation of NbS$_3$ crystals into high-aspect ratio quasi-1D fillers dispersed in a mixture of isopropyl alcohol and ethylene glycol solution. The results of the electrical measurements of two-terminal electronic test structures printed on silicon substrates reveal resistance anomalies in the temperature range of ~330 K to 370 K. It was found that the changes in the temperature-dependent resistive characteristics of the test structures originate from the charge-density-wave phase transition of individual NbS$_3$ fillers. The latter confirms that the exfoliated NbS$_3$ fillers preserve their intrinsic charge-density-wave quantum condensate states and can undergo phase transitions above room temperature even after chemical exfoliation processes and printing. These results are important for developing "quantum inks" with charge-density-wave fillers for the increased functionality of future solution-processed electronics. △ Less

Submitted 13 April, 2024; originally announced April 2024.

Comments: 25 pages; 5 figures

Acoustic and Optical Phonons in Quasi-Two-Dimensional MPX3 Van der Waals Semiconductors

Authors: Dylan Wright, Zahra Ebrahim Nataj, Erick Guzman, Jake Polster, Menno Bouman, Fariborz Kargar, Alexander A. Balandin

Abstract: We report the results of the investigation of the acoustic and optical phonons in quasi-two-dimensional antiferromagnetic semiconductors of the transition metal phosphorus trisulfide family with Mn, Fe, Co, Ni, and Cd as metal atoms. The Brillouin-Mandelstam and Raman light scattering spectroscopies were conducted at room temperature to measure the acoustic and optical phonon frequencies close to… ▽ More We report the results of the investigation of the acoustic and optical phonons in quasi-two-dimensional antiferromagnetic semiconductors of the transition metal phosphorus trisulfide family with Mn, Fe, Co, Ni, and Cd as metal atoms. The Brillouin-Mandelstam and Raman light scattering spectroscopies were conducted at room temperature to measure the acoustic and optical phonon frequencies close to the Brillouin zone center. The absorption and index of refraction were measured in the visible and infrared ranges using the reflectometry technique. We found an intriguing large variation, over ~28%, in the acoustic phonon group velocities in this group of materials with similar crystal structures. Our data indicate that the full-width-at-half-maximum of the acoustic phonon peaks is strongly affected by the optical properties and the electronic band gap. The acoustic phonon lifetime extracted for some of the materials was correlated with their thermal properties. The obtained results are important for understanding the layered van der Waals semiconductors and for assessing their potential for optoelectronic and spintronic device applications. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Comments: 19 pages; 4 figures

Ultrahigh Thermal Conductivity of Cubic Boron Arsenide with an Unexpectedly Strong Temperature Dependence

Authors: Songrui Hou, Fengjiao Pan, Xinping Shi, Zahra Ebrahim Nataj, Fariborz Kargar, Alexander A. Balandin, David G. Cahill, Chen Li, Zhifeng Ren, Richard B. Wilson

Abstract: Materials with high thermal conductivity are needed to conduct heat away from hot spots in power electronics and optoelectronic devices. Cubic boron arsenide (c-BAs) has a high thermal conductivity due to its special phonon dispersion relation. Previous experimental studies of c-BAs report a room-temperature thermal conductivity between 1000 and 1300 watts per meter-kelvin. We synthesized high pur… ▽ More Materials with high thermal conductivity are needed to conduct heat away from hot spots in power electronics and optoelectronic devices. Cubic boron arsenide (c-BAs) has a high thermal conductivity due to its special phonon dispersion relation. Previous experimental studies of c-BAs report a room-temperature thermal conductivity between 1000 and 1300 watts per meter-kelvin. We synthesized high purity c-BAs single crystals with room-temperature thermal conductivity of 1500 watts per meter-kelvin. We observed its thermal conductivity to be proportional to the inverse square of temperature between 300 and 600 kelvin, a stronger dependence than predicted by state-of-the-art theory. △ Less

Submitted 31 January, 2024; originally announced February 2024.

Comments: 14 pages, 3 figures

Electronic Noise Spectroscopy of Quasi-2D van der Waals Antiferromagnetic Semiconductors

Authors: Subhajit Ghosh, Zahra Ebrahim Nataj, Fariborz Kargar, Alexander A. Balandin

Abstract: We investigated low-frequency current fluctuations, i.e. electronic noise, in FePS3 van der Waals, layered antiferromagnetic semiconductor. The noise measurements have been used as noise spectroscopy for advanced materials characterization of the charge carrier dynamics affected by spin ordering and trapping states. Owing to the high resistivity of the material, we conducted measurements on vertic… ▽ More We investigated low-frequency current fluctuations, i.e. electronic noise, in FePS3 van der Waals, layered antiferromagnetic semiconductor. The noise measurements have been used as noise spectroscopy for advanced materials characterization of the charge carrier dynamics affected by spin ordering and trapping states. Owing to the high resistivity of the material, we conducted measurements on vertical device configuration. The measured noise spectra reveal pronounced Lorentzian peaks of two different origins. One peak is observed only near the Neel temperature and it is attributed to the corresponding magnetic phase transition. The second Lorentzian peak, visible in the entire measured temperature range, has the characteristics of the trap-assisted generation-recombination processes similar to those in conventional semiconductors but shows a clear effect of the spin order reconfiguration near the Neel temperature. The obtained results contribute to understanding the electron and spin dynamics in this type of antiferromagnetic semiconductors and demonstrate the potential of electronic noise spectroscopy for advanced materials characterization. △ Less

Submitted 22 January, 2024; originally announced January 2024.

Comments: 24 pages; 4 figures

Phonon States in NbTe$_4$ and TaTe$_4$ Quasi-One-Dimensional van der Waals Crystals

Authors: Zahra Ebrahim Nataj, Fariborz Kargar, Sergiy Krylyuk, Topojit Debnath, Maedeh Taheri, Subhajit Ghosh, Huairuo Zhang, Albert V. Davydov, Roger K. Lake, Alexander A. Balandin

Abstract: We report the results of polarization-dependent Raman spectroscopy of phonon states in single-crystalline quasi-one-dimensional NbTe$_4$ and TaTe$_4$ van der Waals materials. The measurements were conducted in the wide temperature range from 80 K to 560 K. Our results show that although both materials have identical crystal structures and symmetries, there is a drastic difference in the intensity… ▽ More We report the results of polarization-dependent Raman spectroscopy of phonon states in single-crystalline quasi-one-dimensional NbTe$_4$ and TaTe$_4$ van der Waals materials. The measurements were conducted in the wide temperature range from 80 K to 560 K. Our results show that although both materials have identical crystal structures and symmetries, there is a drastic difference in the intensity of their Raman spectra. While TaTe4 exhibits well-defined peaks through the examined frequency and temperature ranges, NbTe4 reveals extremely weak Raman signatures. The measured spectral positions of the phonon peaks agree with the phonon band structure calculated using the density-functional theory. We offer possible reasons for the in-tensity differences between the two van der Waals materials. Our results provide insights into the phonon properties of NbTe$_4$ and TaTe$_4$ van der Waals materials and indicate the potential of Raman spectroscopy for studying charge-density-wave quantum condensate phases. △ Less

Submitted 5 November, 2023; originally announced November 2023.

Comments: 24 pages; 6 figures; 1 table

Temperature Dependent Low-Frequency Noise Characteristics of NiO$_x$/Ga$_2$O$_3$ p-n Heterojunction Diodes

Authors: Subhajit Ghosh, Dinusha Herath Mudiyanselage, Fariborz Kargar, Yuji Zhao, Houqiang Fu, Alexander A. Balandin

Abstract: We report on the temperature dependence of the low-frequency electronic noise in NiO$_x$/Ga$_2$O$_3$ p-n heterojunction diodes. The noise spectral density is of the 1/f-type near room temperature but shows signatures of Lorentzian components at elevated temperatures and at higher current levels (f is the frequency). We observed an intriguing non-monotonic dependence of the noise on temperature nea… ▽ More We report on the temperature dependence of the low-frequency electronic noise in NiO$_x$/Ga$_2$O$_3$ p-n heterojunction diodes. The noise spectral density is of the 1/f-type near room temperature but shows signatures of Lorentzian components at elevated temperatures and at higher current levels (f is the frequency). We observed an intriguing non-monotonic dependence of the noise on temperature near T = 380$^\circ$ K. The Raman spectroscopy of the device structure suggests material changes, which results in reduced noise above this temperature. The normalized noise spectral density in such diodes was determined to be on the order of 10$^{-14}$ cm$^2$/Hz (f = 10 Hz) at 0.1 A/cm$^2$ current density. In terms of the noise level, NiO$_x$/Ga$_2$O$_3$ p-n diodes occupy an intermediate position among devices of various designs implemented with different ultra-wide-band-gap (UWBG) semiconductors. The obtained results are important for understanding the electronic properties of the UWBG heterojunctions and contribute to the development of noise spectroscopy as the quality assessment tool for new electronic materials and device technologies. △ Less

Submitted 28 July, 2023; originally announced July 2023.

Comments: 18 pages, 6 figures

Optical and Acoustic Phonons in Turbostratic and Cubic Boron Nitride Thin Films on Diamond Substrates

Authors: Erick Guzman, Fariborz Kargar, Avani Patel, Saurabh Vishwakarma, Dylan Wright, Richard B. Wilson, David J. Smith, Robert J. Nemanich, Alexander A. Balandin

Abstract: We report an investigation of the bulk optical, bulk acoustic, and surface acoustic phonons in thin films of turbostratic boron nitride (t-BN) and cubic boron nitride (c-BN) grown on B-doped polycrystalline and single-crystalline diamond (001) and (111) substrates. The characteristics of different types of phonons were determined using Raman and Brillouin-Mandelstam light scattering spectroscopies… ▽ More We report an investigation of the bulk optical, bulk acoustic, and surface acoustic phonons in thin films of turbostratic boron nitride (t-BN) and cubic boron nitride (c-BN) grown on B-doped polycrystalline and single-crystalline diamond (001) and (111) substrates. The characteristics of different types of phonons were determined using Raman and Brillouin-Mandelstam light scattering spectroscopies. The atomic structure of the films was determined using high-resolution transmission electron microscopy (HRTEM) and correlated with the Raman and Brillouin-Mandelstam spectroscopy data. The HRTEM analysis revealed that the cubic boron nitride thin films consisted of a mixture of c-BN and t-BN phases, with c-BN being the dominant phase. It was found that while visible Raman spectroscopy provided information for characterizing the t-BN phase, it faced challenges in differentiating the c-BN phase either due to the presence of high-density defects or the overlapping of the Raman features with those from the B-doped diamond substrates. In contrast, Brillouin-Mandelstam spectroscopy clearly distinguishes the bulk longitudinal and surface acoustic phonons of the c-BN thin films grown on diamond substrates. Additionally, the angle-dependent surface Brillouin-Mandelstam scattering data show the peaks associated with the Rayleigh surface acoustic waves, which have higher phase velocities in c-BN films on diamond (111) substrates. These findings provide valuable insights into the phonon characteristics of the c-BN and diamond interfaces and have important implications for the thermal management of electronic devices based on ultra-wide-band-gap materials. △ Less

Submitted 20 July, 2023; originally announced July 2023.

Comments: 27 pages; 4 figures

Conductance Fluctuations and Domain Depinning in Quasi-2D Charge-Density-Wave 1T-TaS$_2$ Thin Films

Authors: Jonas O. Brown, Maedeh Taheri, Fariborz Kargar, Ruben Salgado, Tekwam Geremew, Sergey Rumyantsev, Roger K. Lake, Alexander A. Balandin

Abstract: We investigated the temperature dependence of the conductance fluctuations in thin films of the quasi-two-dimensional 1T-TaS$_2$ van der Waals material. The conductance fluctuations, determined from the derivative current-voltage characteristics of two-terminal 1T-TaS$_2$ devices, appear prominently at the electric fields that correspond to the transitions between various charge-density-wave macro… ▽ More We investigated the temperature dependence of the conductance fluctuations in thin films of the quasi-two-dimensional 1T-TaS$_2$ van der Waals material. The conductance fluctuations, determined from the derivative current-voltage characteristics of two-terminal 1T-TaS$_2$ devices, appear prominently at the electric fields that correspond to the transitions between various charge-density-wave macroscopic quantum condensate phases and at the onset of the depinning of the charge density wave domains. The depinning threshold field, $E_D$, monotonically increases with decreasing temperature within the nearly commensurate charge-density-wave phase. The $E_D$ value increases with the decreasing 1T-TaS$_2$ film thickness, revealing the surface pinning of the charge density waves. Our analysis suggests that depinning is absent in the commensurate phase. It is induced by the electric field but facilitated by local heating. The measured trends for $E_D$ of the domain depinning are important for understanding the physics of charge density waves in quasi-two-dimensional crystals and for developing electronic devices based on this type of quantum materials. △ Less

Submitted 16 July, 2023; originally announced July 2023.

Comments: 25 pages; 7 figures

Quantum Composites with the Functionality Defined by the Charge-Density-Wave Phase Transitions

Authors: Zahra Barani, Tekwam Geremew, Megan Stokey, Nicholas Sesing, Maedeh Taheri, Matthew J. Hilfiker, Fariborz Kargar, Mathias Schubert, Tina T. Salguero, Alexander A. Balandin

Abstract: We demonstrate a unique class of advanced materials - quantum composites based on polymers with fillers comprised of a van der Waals quantum material that reveals multiple charge-density-wave quantum condensate phases. Materials that exhibit quantum phenomena are typically crystalline, pure, and have few defects because disorder destroys the coherence of the electrons and phonons, leading to colla… ▽ More We demonstrate a unique class of advanced materials - quantum composites based on polymers with fillers comprised of a van der Waals quantum material that reveals multiple charge-density-wave quantum condensate phases. Materials that exhibit quantum phenomena are typically crystalline, pure, and have few defects because disorder destroys the coherence of the electrons and phonons, leading to collapses of the quantum states. We succeeded in preserving the macroscopic charge-density-wave phases of filler particles after multiple composite processing steps. The prepared composites manifest strong charge-density-wave phenomena even above room temperature. The dielectric constant experiences more than two orders of magnitude enhancement while the material maintains its electrically insulating properties, opening a venue for advanced applications in energy storage and electronics. The results present a conceptually different approach for engineering the properties of materials, extending the application domain for van der Waals materials. △ Less

Submitted 21 February, 2023; originally announced February 2023.

Comments: 23 pages, 5 figures

Cryogenic Characteristics of Graphene Composites -- Evolution from Thermal Conductors to Thermal Insulators

Authors: Zahra Ebrahim Nataj, Youming Xu, Jonas Brown, Jivtesh Garg, Xi Chen, Fariborz Kargar, Alexander A. Balandin

Abstract: The development of cryogenic semiconductor electronics and superconducting quantum computing requires composite materials that can provide both thermal conduction and thermal insulation. We demonstrated that at cryogenic temperatures, the thermal conductivity of graphene composites can be both higher and lower than that of the reference pristine epoxy, depending on the graphene filler loading and… ▽ More The development of cryogenic semiconductor electronics and superconducting quantum computing requires composite materials that can provide both thermal conduction and thermal insulation. We demonstrated that at cryogenic temperatures, the thermal conductivity of graphene composites can be both higher and lower than that of the reference pristine epoxy, depending on the graphene filler loading and temperature. There exists a well-defined cross-over temperature - above it, the thermal conductivity of composites increases with the addition of graphene; below it, the thermal conductivity decreases with the addition of graphene. The counter-intuitive trend was explained by the specificity of heat conduction at low temperatures: graphene fillers can serve as, both, the scattering centers for phonons in the matrix material and as the conduits of heat. We offer a physical model that explains the experimental trends by the increasing effect of the thermal boundary resistance at cryogenic temperatures and the anomalous thermal percolation threshold, which becomes temperature dependent. The obtained results suggest the possibility of using graphene composites for, both, removing the heat and thermally insulating components at cryogenic temperatures - a capability important for quantum computing and cryogenically cooled conventional electronics. △ Less

Submitted 10 February, 2023; originally announced February 2023.

Comments: 27 pages, 4 figures

Specifics of the Elemental Excitations in "True One-Dimensional" MoI$_3$ van der Waals Nanowires

Authors: Fariborz Kargar, Zahra Barani, Nicholas R. Sesing, Thuc T. Mai, Topojit Debnath, Huairuo Zhang, Yuhang Liu, Yanbing Zhu, Subhajit Ghosh, Adam J. Biacchi, Felipe H. da Jornada, Ludwig Bartels, Tehseen Adel, Angela R. Hight Walker, Albert V. Davydov, Tina T. Salguero, Roger K. Lake, Alexander A. Balandin

Abstract: We report on the temperature evolution of the polarization-dependent Raman spectrum of exfoliated MoI$_3$, a van der Waals material with a "true one-dimensional" crystal structure that can be exfoliated to individual atomic chains. The temperature evolution of several Raman features reveals anomalous behavior suggesting a phase transition of a magnetic origin. Theoretical considerations indicate t… ▽ More We report on the temperature evolution of the polarization-dependent Raman spectrum of exfoliated MoI$_3$, a van der Waals material with a "true one-dimensional" crystal structure that can be exfoliated to individual atomic chains. The temperature evolution of several Raman features reveals anomalous behavior suggesting a phase transition of a magnetic origin. Theoretical considerations indicate that MoI$_3$ is an easy-plane antiferromagnet with alternating spins along the dimerized chains and with inter-chain helical spin ordering. The calculated frequencies of the phonons and magnons are consistent with the interpretation of the experimental Raman data. The obtained results shed light on the specifics of the phononic and magnonic states in MoI$_3$ and provide a strong motivation for future study of this unique material with potential for spintronic device applications. △ Less

Submitted 10 October, 2022; originally announced October 2022.

Comments: 28 pages

Electrical Gating of the Charge-Density-Wave Phases in Quasi-2D h-BN/1T-TaS$_2$ Devices

Authors: Maedeh Taheri, Jonas Brown, Adil Rehman, Nicholas R. Sesing, Fariborz Kargar, Tina T. Salguero, Sergey Rumyantsev, Alexander A. Balandin

Abstract: We report on electrical gating of the charge-density-wave phases and current in h-BN capped three-terminal 1T-TaS$_2$ heterostructure devices. It is demonstrated that the application of a gate bias can shift the source-drain current-voltage hysteresis associated with the transition between the nearly commensurate and incommensurate charge-density wave phases. The evolution of the hysteresis and th… ▽ More We report on electrical gating of the charge-density-wave phases and current in h-BN capped three-terminal 1T-TaS$_2$ heterostructure devices. It is demonstrated that the application of a gate bias can shift the source-drain current-voltage hysteresis associated with the transition between the nearly commensurate and incommensurate charge-density wave phases. The evolution of the hysteresis and the presence of abrupt spikes in the current while sweeping the gate voltage suggest that the effect is electrical rather than self-heating. We attribute the gating to an electric-field effect on the commensurate charge-density-wave domains in the atomic planes near the gate dielectric. The transition between the nearly commensurate and incommensurate charge-density-wave phases can be induced by both the source-drain current and the electrostatic gate. Since the charge-density-wave phases are persistent in 1T-TaS2 at room temperature, one can envision memory applications of such devices when scaled down to the dimensions of individual commensurate domains and few-atomic plane thicknesses. △ Less

Submitted 10 August, 2022; originally announced August 2022.

Comments: 26 pages, 5 figures

Low-Frequency Noise in Quasi-1D (TaSe$_4$)$_2$I Weyl Semimetal Nanoribbons

Authors: Subhajit Ghosh, Fariborz Kargar, Nick R. Sesing, Zahra Barani, Tina T. Salguero, Dong Yan, Sergey Rumyantsev, Alexander A. Balandin

Abstract: We report on low-frequency current fluctuations, i.e. electronic noise, in quasi-one-dimensional (TaSe$_4$)$_2$I Weyl semimetal nanoribbons. It was found that the noise spectral density is of the 1/f type and scales with the square of the current, S~I^2 (f is the frequency). The noise spectral density increases by almost an order of magnitude and develops Lorentzian features near the temperature T… ▽ More We report on low-frequency current fluctuations, i.e. electronic noise, in quasi-one-dimensional (TaSe$_4$)$_2$I Weyl semimetal nanoribbons. It was found that the noise spectral density is of the 1/f type and scales with the square of the current, S~I^2 (f is the frequency). The noise spectral density increases by almost an order of magnitude and develops Lorentzian features near the temperature T~225 K. These spectral changes were attributed to the charge-density-wave phase transition even though the temperature of the noise maximum deviates from the reported Peierls transition temperature in bulk (TaSe$_4$)$_2$I crystals. The noise level, normalized by the channel area, in these Weyl semimetal nanoribbons was surprisingly low, $\sim 10^{-9}$ um$^2$Hz$^{-1}$ at f=10 Hz, when measured below and above the Peierls transition temperature. Obtained results shed light on the specifics of electron transport in quasi-1D topological Weyl semimetals and can be important for their proposed applications as downscaled interconnects. △ Less

Submitted 12 August, 2022; originally announced August 2022.

Comments: 20 pages, 5 figures

The Effects of Boron Doping on the Bulk and Surface Acoustic Phonons in Single-Crystal Diamond

Authors: Erick Guzman, Fariborz Kargar, Frank Angeles, Reza Vatan Meidanshahi, Timothy A. Grotjohn, Aaron Hardy, Matthias Muehle, Richard B. Wilson, Stephen Goodnik, Alexander A. Balandin

Abstract: We report the results of the investigation of bulk and surface acoustic phonons in the undoped and boron-doped single-crystal diamond films using the Brillouin-Mandelstam light scattering spectroscopy. The evolution of the optical phonons in the same set of samples was monitored with Raman spectroscopy. It was found that the frequency and the group velocity of acoustic phonons decrease non-monoton… ▽ More We report the results of the investigation of bulk and surface acoustic phonons in the undoped and boron-doped single-crystal diamond films using the Brillouin-Mandelstam light scattering spectroscopy. The evolution of the optical phonons in the same set of samples was monitored with Raman spectroscopy. It was found that the frequency and the group velocity of acoustic phonons decrease non-monotonically with the increasing boron doping concentration, revealing pronounced phonon softening. The change in the velocity of the shear horizontal and the high-frequency pseudo-longitudinal acoustic phonons in the degenerately doped diamond, as compared to the undoped diamond, was as large as ~15% and ~12%, respectively. As a result of boron doping, the velocity of the bulk longitudinal and transverse acoustic phonons decreased correspondingly. The frequency of the optical phonons was unaffected at low boron concentration but experienced a strong decrease at the high doping level. The density-functional-theory calculations of the phonon band structure for the pristine and highly-doped sample confirm the phonon softening as a result of boron doping in diamond. The obtained results have important implications for thermal transport in heavily doped diamond, which is a promising material for ultra-wide-band-gap electronics. △ Less

Submitted 23 June, 2022; originally announced June 2022.

Comments: 27 pages; 5 figures

One-Dimensional van der Waals Quantum Materials -- State of the Art and Perspectives

Authors: Alexander A. Balandin, Fariborz Kargar, Tina T. Salguero, Roger K. Lake

Abstract: The advent of graphene and other two-dimensional van der Waals materials, with their unique electrical, optical, and thermal properties, has resulted in tremendous progress for fundamental science. Recent developments suggest that taking one more step down in dimensionality - from monolayer, atomic sheets to individual atomic chains - can bring exciting prospects as the ultimate limit in material… ▽ More The advent of graphene and other two-dimensional van der Waals materials, with their unique electrical, optical, and thermal properties, has resulted in tremendous progress for fundamental science. Recent developments suggest that taking one more step down in dimensionality - from monolayer, atomic sheets to individual atomic chains - can bring exciting prospects as the ultimate limit in material downscaling is reached while establishing an entirely new field of one-dimensional quantum materials. Here we review this emerging area of one-dimensional van der Waals quantum materials and anticipate its future directions. We focus on quantum effects associated with the charge-density-wave condensate, strongly-correlated phenomena, topological phases, and other unique physical characteristics, which are attainable specifically in van der Waals materials of lower dimensionality. Possibilities for engineering the properties of quasi-one-dimensional materials via compositional changes, vacancies, and defects, as well as the prospects of their applications in composites are also discussed. △ Less

Submitted 26 February, 2022; originally announced February 2022.

Comments: 52 pages; 10 figures

Journal ref: Materials Today, 55, 74-91 (2022)

Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS$_2$ Fillers

Authors: Saba Baraghani, Zahra Barani, Yassamin Ghafouri, Amirmahdi Mohammadzadeh, Sriharsha Sudhindra, Tina T. Salguero, Fariborz Kargar, Alexander A. Balandin

Abstract: We report on the preparation of inks containing fillers derived from quasi-two-dimensional charge-density-wave materials, their application for inkjet printing, and the evaluation of their electronic properties in printed thin film form. The inks were prepared by liquid-phase exfoliation of CVT-grown 1T-TaS$_2$ crystals to produce fillers with nm-scale thickness and um-scale lateral dimensions. Ex… ▽ More We report on the preparation of inks containing fillers derived from quasi-two-dimensional charge-density-wave materials, their application for inkjet printing, and the evaluation of their electronic properties in printed thin film form. The inks were prepared by liquid-phase exfoliation of CVT-grown 1T-TaS$_2$ crystals to produce fillers with nm-scale thickness and um-scale lateral dimensions. Exfoliated 1T-TaS$_2$ was dispersed in a mixture of isopropyl alcohol and ethylene glycol to allow fine-tuning of their thermo-physical properties for inkjet printing. The temperature-dependent electrical and current fluctuation measurements of printed thin films demonstrated that the charge-density-wave properties of 1T-TaS$_2$ are preserved after processing. The functionality of the printed thin-film devices can be defined by the nearly-commensurate to commensurate charge-density-wave phase transition of individual exfoliated 1T-TaS$_2$ fillers rather than by electron-hopping transport between them. These results provide pathways for the development of printed electronics with diverse functionality achieved by the incorporation of quasi-two-dimensional van der Waals quantum materials. △ Less

Submitted 15 January, 2022; originally announced January 2022.

Comments: 25 pages; 5 figures

Journal ref: ACS Nano, 16, 4, 6325-6333 (2022)

Excess Noise in High-Current Diamond Diodes -- Physical Mechanisms and Implications for Reliability Assessment

Authors: Subhajit Ghosh, Harshad Surdi, Fariborz Kargar, Franz A. Koeck, Sergey Rumyantsev, Stephen Goodnick, Robert Nemanich, Alexander A. Balandin

Abstract: We report results of an investigation of low-frequency excess noise in high-current diamond diodes. It was found that the electronic excess noise of the diamond diodes is dominated by generation - recombination noise, which reveals itself either as Lorentzian spectral features or as a 1/f noise spectrum (f is the frequency). The generation - recombination bulges are characteristic for diamond diod… ▽ More We report results of an investigation of low-frequency excess noise in high-current diamond diodes. It was found that the electronic excess noise of the diamond diodes is dominated by generation - recombination noise, which reveals itself either as Lorentzian spectral features or as a 1/f noise spectrum (f is the frequency). The generation - recombination bulges are characteristic for diamond diodes with lower turn-on voltages. The noise spectral density dependence on forward current, I, reveals three distinctive regions in all examined devices - it scales as I^2 at the low (I<10 uA) and high (I>10 mA) currents, and, rather unusually, remain nearly constant at the intermediate current range. The characteristic trap time constants, extracted from the noise data, reveal a uniquely strong dependence on current. Interestingly, the performance of the diamond diodes improves with increasing temperature. The obtained results are important for development of noise spectroscopy-based approaches for device reliability assessment for the high-power diamond electronics. △ Less

Submitted 26 December, 2021; originally announced December 2021.

Comments: 17 pages; 4 figures

Journal ref: Appl. Phys. Lett., 120, 062103 (2022)

Low-Frequency Noise Characteristics of GaN Vertical PIN Diodes -- Effects of Current and Temperature

Authors: Subhajit Ghosh, Kai Fu, Fariborz Kargar, Sergey Rumyantsev, Yuji Zhao, Alexander A. Balandin

Abstract: We report low-frequency noise characteristics of vertical GaN PIN diodes, focusing on the effects of the diode design, current and temperature. The as-grown and regrown diodes, with and without surface treatment have been studied. The noise in most of the GaN devices had a characteristic 1/f spectrum at high and moderate currents, while some devices revealed generation-recombination bulges at low… ▽ More We report low-frequency noise characteristics of vertical GaN PIN diodes, focusing on the effects of the diode design, current and temperature. The as-grown and regrown diodes, with and without surface treatment have been studied. The noise in most of the GaN devices had a characteristic 1/f spectrum at high and moderate currents, while some devices revealed generation-recombination bulges at low currents (f is the frequency). The predominant trend of the noise spectral density, S, dependence on the current was S ~ I. All tested GaN PIN diodes had rather low normalized noise spectral densities of 10^-18 cm2/Hz -- 10^-16 cm2/Hz (f=10 Hz) at the current density J=1 A/cm2 at room temperature. The noise temperature dependences at different currents revealed peaks at T=375 K -- 400 K. Temperature, current, and frequency dependences of noise suggest that the noise mechanism is of the recombination origin. We argue that the noise measurements at low currents can be used to efficiently assess the quality of GaN PIN diodes. △ Less

Submitted 12 December, 2021; originally announced December 2021.

Comments: 12 pages; 4 figures

Journal ref: Appl. Phys. Lett., 119, 243505 (2021)

Metallic vs. Semiconducting Properties of Quasi-One-Dimensional Tantalum Selenide van der Waals Nanoribbons

Authors: Fariborz Kargar, Andrey Krayev, Michelle Wurch, Yassamin Ghafouri, Topojit Debnath, Darshana Wickramaratne, Tina T. Salguero, Roger Lake, Ludwig Bartels, Alexander A. Balandin

Abstract: We conducted a tip-enhanced Raman scattering spectroscopy (TERS) and photoluminescence (PL) study of quasi-1D TaSe3 nanoribbons exfoliated onto gold substrates. At a selenium deficiency of ~0.25 (Se/Ta=2.75,), the nanoribbons exhibit a strong, broad PL peak centered around ~920 nm (1.35 eV), suggesting their semiconducting behavior. Such nanoribbons revealed a strong TERS response under 785-nm las… ▽ More We conducted a tip-enhanced Raman scattering spectroscopy (TERS) and photoluminescence (PL) study of quasi-1D TaSe3 nanoribbons exfoliated onto gold substrates. At a selenium deficiency of ~0.25 (Se/Ta=2.75,), the nanoribbons exhibit a strong, broad PL peak centered around ~920 nm (1.35 eV), suggesting their semiconducting behavior. Such nanoribbons revealed a strong TERS response under 785-nm laser excitation, allowing for their nanoscale spectroscopic imaging. Nanoribbons with a smaller selenium deficiency of ~0.15 (Se/Ta=2.85) did not show any PL or TERS response. The confocal Raman spectra of these samples agree with the previously-reported spectra of metallic TaSe3. The differences in the optical response of the nanoribbons examined in this study suggest that even small variations in Se content can induce changes in electronic structure, causing samples to exhibit either metallic or semiconducting character. The temperature-dependent electrical measurements of devices fabricated with both types of materials corroborate these observations. The density-functional-theory calculations revealed that incorporation of an oxygen atom in a Se vacancy can result in band gap opening and thus enable the transition from a metal to a semiconductor. However, the predicted bandgap is substantially smaller than that derived from PL data. These results indicate that the properties of van der Waals materials can vary significantly depending on stoichiometry, defect types and concentration, and possibly environmental and substrate effects. In view of this finding, local probing of nanoribbon properties with TERS becomes essential to understanding such low-dimensional systems. △ Less

Submitted 24 November, 2021; originally announced November 2021.

Comments: 24 pages, 8 figures

Efficient Absorption of Terahertz Radiation in Graphene Polymer Composites

Authors: Zahra Barani, Kamil Stelmaszczyk, Fariborz Kargar, Yevhen Yashchyshyn, Grzegorz Cywiński, Sergey Rumyantsev, Alexander A. Balandin

Abstract: We demonstrate that polymer composites with a low loading of graphene, below 1.2 wt. %, are efficient as electromagnetic absorbers in the THz frequency range. The epoxy-based graphene composites were tested at frequencies from 0.25 THz to 4 THz, revealing total shielding effectiveness of 85 dB (1 mm thickness) with graphene loading of 1.2 wt. % at the frequency f=1.6 THz. The THz radiation is most… ▽ More We demonstrate that polymer composites with a low loading of graphene, below 1.2 wt. %, are efficient as electromagnetic absorbers in the THz frequency range. The epoxy-based graphene composites were tested at frequencies from 0.25 THz to 4 THz, revealing total shielding effectiveness of 85 dB (1 mm thickness) with graphene loading of 1.2 wt. % at the frequency f=1.6 THz. The THz radiation is mostly blocked by absorption rather than reflection. The efficiency of the THz radiation shielding by the lightweight, electrically insulating composites, increases with increasing frequency. Our results suggest that even the thin-film or spray coatings of graphene composites with thickness in the few-hundred-micrometer range can be sufficient for blocking THz radiation in many practical applications. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Comments: 21 page, 5 figures

Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials

Authors: Saba Baraghani, Jehad Abourahma, Zahra Barani, Amirmahdi Mohammadzadeh, Sriharsha Sudhindra, Alexey Lipatov, Alexander Sinitskii, Fariborz Kargar, Alexander A. Balandin

Abstract: We report on fabrication and characterization of electronic devices printed with inks of quasi-1D van der Waals materials. The quasi-1D van der Waals materials are characterized by 1D motifs in their crystal structure, which allows for their exfoliation into bundles of atomic chains. The ink was prepared by the liquid-phase exfoliation of crystals of TiS3 semiconductor into quasi-1D nanoribbons di… ▽ More We report on fabrication and characterization of electronic devices printed with inks of quasi-1D van der Waals materials. The quasi-1D van der Waals materials are characterized by 1D motifs in their crystal structure, which allows for their exfoliation into bundles of atomic chains. The ink was prepared by the liquid-phase exfoliation of crystals of TiS3 semiconductor into quasi-1D nanoribbons dispersed in a mixture of ethanol and ethylene glycol. The temperature dependent electrical measurements indicate that electron transport in the printed devices is dominated by the electron hopping mechanisms. The low-frequency electronic noise in the printed devices is of 1/f type near room temperature (f is the frequency). The abrupt changes in the temperature dependence of the noise spectral density and the spectrum itself can be indicative of the phase transition in individual TiS3 nanoribbons as well as modifications in the hopping transport regime. The obtained results attest to the potential of quasi-1D van der Waals materials for applications in printed electronics. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Comments: 28 pages; 4 figures

Phonon modes and Raman signatures of MnBi2nTe3n+1 (n=1,2,3,4) magnetic topological heterostructures

Authors: Yujin Cho, Jin Ho Kang, Liangbo Liang, Xiangru Kong, Subhajit Ghosh, Fariborz Kargar, Chaowei Hu, Alexander A. Balandin, Alexander A. Puretzky, Ni Ni, Chee Wei Wong

Abstract: An intrinsic antiferromagnetic topological insulator $\mathrm{MnBi_2Te_4}$ can be realized by intercalating Mn-Te bilayer chain in a topological insulator, $\mathrm{Bi_2Te_3}$. $\mathrm{MnBi_2Te_4}$ provides not only a stable platform to demonstrate exotic physical phenomena, but also easy tunability of the physical properties. For example, inserting more $\mathrm{Bi_2Te_3}$ layers in between two… ▽ More An intrinsic antiferromagnetic topological insulator $\mathrm{MnBi_2Te_4}$ can be realized by intercalating Mn-Te bilayer chain in a topological insulator, $\mathrm{Bi_2Te_3}$. $\mathrm{MnBi_2Te_4}$ provides not only a stable platform to demonstrate exotic physical phenomena, but also easy tunability of the physical properties. For example, inserting more $\mathrm{Bi_2Te_3}$ layers in between two adjacent $\mathrm{MnBi_2Te_4}$ weakens the interlayer magnetic interactions between the $\mathrm{MnBi_2Te_4}$ layers. Here we present the first observations on the inter- and intra-layer phonon modes of $\mathrm{MnBi_{2n}Te_{3n+1}}$ (n=1,2,3,4) using cryogenic low-frequency Raman spectroscopy. We experimentally and theoretically distinguish the Raman vibrational modes using various polarization configurations. The two peaks at 66 cm$^{-1}$ and 112 cm$^{-1}$ show an abnormal perturbation in the Raman linewidths below the magnetic transition temperature due to spin-phonon coupling. In $\mathrm{MnBi_4Te_7}$, the $\mathrm{Bi_2Te_3}$ layers induce Davydov splitting of the A$_{1g}$ mode around 137 cm$^{-1}$ at 5 K. Using the linear chain model, we estimate the out-of-plane interlayer force constant to be $(3.98 \pm 0.14) \times 10^{19}$ N/m$^3$ at 5 K, three times weaker than that of $\mathrm{Bi_2Te_3}$. Our work discovers the dynamics of phonon modes of the $\mathrm{MnBi_2Te_4}$ and the effect of the additional $\mathrm{Bi_2Te_3}$ layers, providing the first-principles guidance to tailor the physical properties of layered heterostructures. △ Less

Submitted 26 July, 2021; v1 submitted 7 July, 2021; originally announced July 2021.

Comments: 9 pages, 4 figures

Noncured Graphene Thermal Interface Materials: Minimizing the Thermal Contact Resistance

Authors: Sriharsha Sudhindra, Fariborz Kargar, Alexander A. Balandin

Abstract: We report on experimental investigation of thermal contact resistance of the noncuring graphene thermal interface materials with the surfaces characterized by different degree of roughness. It is found that the thermal contact resistance depends on the graphene loading non-monotonically, achieving its minimum at the loading fraction of ~15 wt.%. Increasing the surface roughness by ~1 micrometer re… ▽ More We report on experimental investigation of thermal contact resistance of the noncuring graphene thermal interface materials with the surfaces characterized by different degree of roughness. It is found that the thermal contact resistance depends on the graphene loading non-monotonically, achieving its minimum at the loading fraction of ~15 wt.%. Increasing the surface roughness by ~1 micrometer results in approximately the factor of x2 increase in the thermal contact resistance for this graphene loading. The obtained dependences of the thermal conductivity, thermal contact resistance, and the total thermal resistance of the thermal interface material layer on the graphene loading and surface roughness indicate the need for optimization of the loading fraction for specific materials and roughness of the connecting surfaces. Our results are important for developing graphene technologies for thermal management of high-power-density electronics. △ Less

Submitted 3 June, 2021; originally announced June 2021.

Comments: 25 pages, 7 figures

Depinning of the Charge-Density Waves in Quasi-2D 1T-TaS2 Devices Operating at Room Temperature

Authors: A. Mohammadzadeh, A. Rehman, F. Kargar, S. Rumyantsev, J. M. Smulko, W. Knap, R. K. Lake, A. A. Balandin

Abstract: We report on depinning of nearly-commensurate charge-density waves in 1T-TaS2 thin-films at room temperature. A combination of the differential current-voltage measurements with the low-frequency noise spectroscopy provide unambiguous means for detecting the depinning threshold field in quasi-2D materials. The depinning process in 1T-TaS2 is not accompanied by an observable abrupt increase in elec… ▽ More We report on depinning of nearly-commensurate charge-density waves in 1T-TaS2 thin-films at room temperature. A combination of the differential current-voltage measurements with the low-frequency noise spectroscopy provide unambiguous means for detecting the depinning threshold field in quasi-2D materials. The depinning process in 1T-TaS2 is not accompanied by an observable abrupt increase in electric current - in striking contrast to depinning in the conventional charge-density-wave materials with quasi-1D crystal structure. We explained it by the fact that the current density from the charge-density waves in the 1T-TaS2 devices is orders of magnitude smaller than the current density of the free carriers available in the discommensuration network surrounding the commensurate charge-density-wave islands. The depinning fields in 1T-TaS2 thin-film devices are several orders of magnitude larger than those in quasi-1D van der Waals materials. Obtained results are important for the proposed applications of the charge-density-wave devices in electronics. △ Less

Submitted 28 April, 2021; originally announced April 2021.

Comments: 19 pages, 4 figures

Low-Frequency Electronic Noise Spectroscopy of Quasi-2D van der Waals Antiferromagnetic Semiconductors

Authors: Subhajit Ghosh, Fariborz Kargar, Amirmahdi Mohammadzadeh, Sergey Rumyantsev, Alexander A. Balandin

Abstract: We investigated low-frequency current fluctuations, i.e. noise, in the quasi-two-dimensional (2D) van der Waals antiferromagnetic semiconductor FePS3 with the electronic bandgap of 1.5 eV. The electrical and noise characteristics of the p-type, highly resistive, thin films of FePS3 were measured at different temperatures. The noise spectral density was of the 1/f - type over most of the examined t… ▽ More We investigated low-frequency current fluctuations, i.e. noise, in the quasi-two-dimensional (2D) van der Waals antiferromagnetic semiconductor FePS3 with the electronic bandgap of 1.5 eV. The electrical and noise characteristics of the p-type, highly resistive, thin films of FePS3 were measured at different temperatures. The noise spectral density was of the 1/f - type over most of the examined temperature range but revealed well-defined Lorentzian bulges, and increased strongly near the Neel temperature of 118 K (f is the frequency). Intriguingly, the noise spectral density attained its minimum at temperature T~200 K, which was attributed to an interplay of two opposite trends in noise scaling - one for semiconductors and another for materials with the phase transitions. The Lorentzian corner frequencies revealed unusual dependence on temperature and bias voltage, suggesting that their origin is different from the generation - recombination noise in conventional semiconductors. The obtained results are important for proposed applications of antiferromagnetic semiconductors in spintronic devices. They also attest to the power of the noise spectroscopy for monitoring various phase transitions. △ Less

Submitted 13 April, 2021; originally announced April 2021.

Comments: 18 pages; 6 figures

Electromagnetic-Polarization Selective Composites with Quasi-1D van der Waals Metallic Fillers

Authors: Zahra Barani, Fariborz Kargar, Yassamin Ghafouri, Saba Baraghani, Sriharsha Sudhindra, Amirmahdi Mohammadzadeh, Tina T. Salguero, Alexander A. Balandin

Abstract: We report on the preparation of flexible polymer composite films with aligned metallic fillers comprised of atomic chain bundles of the quasi-one-dimensional (1D) van der Waals material tantalum triselenide, TaSe3. The material functionality, embedded at the nanoscale level, is achieved by mimicking the design of an electromagnetic aperture grid antenna. The processed composites employ chemically… ▽ More We report on the preparation of flexible polymer composite films with aligned metallic fillers comprised of atomic chain bundles of the quasi-one-dimensional (1D) van der Waals material tantalum triselenide, TaSe3. The material functionality, embedded at the nanoscale level, is achieved by mimicking the design of an electromagnetic aperture grid antenna. The processed composites employ chemically exfoliated TaSe3 nanowires as the grid building blocks incorporated within the thin film. Filler alignment is achieved using the "blade coating" method. Measurements conducted in the X-band frequency range demonstrate that the electromagnetic transmission through such films can be varied significantly by changing the relative orientations of the quasi-1D fillers and the polarization of the electromagnetic wave. We argue that such polarization-sensitive polymer films with quasi-1D fillers are applicable to advanced electromagnetic interference shielding in future communication systems. △ Less

Submitted 9 February, 2021; originally announced February 2021.

Comments: 20 pages, 6 figures

Electrically-Insulating Flexible Films with Quasi-One-Dimensional van-der-Waals Fillers as Efficient Electromagnetic Shields

Authors: Zahra Barani, Fariborz Kargar, Yassamin Ghafouri, Subhajit Ghosh, Konrad Godziszewski, Saba Seyedmahmoudbaraghani, Yevhen Yashchyshyn, Grzegorz Cywiński, Sergey Rumyantsev, Tina T. Salguero, Alexander A. Balandin

Abstract: We report polymer composite films containing fillers comprised of quasi-one-dimensional (1D) van der Waals materials, specifically transition metal trichalcogenides containing 1D structural motifs that enable their exfoliation into bundles of atomic threads. These nanostructures are characterized by extremely large aspect ratios of up to 10^6. The polymer composites with low loadings of quasi-1D T… ▽ More We report polymer composite films containing fillers comprised of quasi-one-dimensional (1D) van der Waals materials, specifically transition metal trichalcogenides containing 1D structural motifs that enable their exfoliation into bundles of atomic threads. These nanostructures are characterized by extremely large aspect ratios of up to 10^6. The polymer composites with low loadings of quasi-1D TaSe3 fillers (below 3 vol. %) revealed excellent electromagnetic interference shielding in the X-band GHz and EHF sub-THz frequency ranges, while remaining DC electrically insulating. The unique electromagnetic shielding characteristics of these films are attributed to effective coupling of the electromagnetic waves to the high-aspect-ratio electrically-conductive TaSe3 atomic-thread bundles even when the filler concentration is below the electrical percolation threshold. These novel films are promising for high-frequency communication technologies, which require electromagnetic shielding films that are flexible, lightweight, corrosion resistant, electrically insulating and inexpensive. △ Less

Submitted 20 January, 2021; originally announced January 2021.

Comments: 24 pages; 5 figures

Journal ref: Advanced Materials, 33, 2007286 (2021)

Brillouin-Mandelstam Light Scattering Spectroscopy: Applications in Phononics and Spintronics

Authors: Fariborz Kargar, Alexander A. Balandin

Abstract: Recent years witnessed much broader use of Brillouin inelastic light scattering spectroscopy for the investigation of phonons and magnons in novel materials, nanostructures, and devices. Driven by developments in instrumentation and the strong need for accurate knowledge of energies of elemental excitations, the Brillouin - Mandelstam spectroscopy is rapidly becoming an essential technique, comple… ▽ More Recent years witnessed much broader use of Brillouin inelastic light scattering spectroscopy for the investigation of phonons and magnons in novel materials, nanostructures, and devices. Driven by developments in instrumentation and the strong need for accurate knowledge of energies of elemental excitations, the Brillouin - Mandelstam spectroscopy is rapidly becoming an essential technique, complementary to the Raman inelastic light scattering spectroscopy. We provide an overview of recent progress in the Brillouin light scattering technique, focusing on the use of this photonic method for the investigation of confined acoustic phonons, phononic metamaterials, magnon propagation and scattering. The Review emphasizes emerging applications of the Brillouin - Mandelstam spectroscopy for phonon engineered structures and spintronic devices and concludes with a perspective for future directions. △ Less

Submitted 16 November, 2020; originally announced November 2020.

Comments: 41 pages, 5 figures

Review of Graphene-based Thermal Polymer Nanocomposites: Current State of the Art and Future Prospects

Authors: Jacob S. Lewis, Timothy Perrier, Zahra Barani, Fariborz Kargar, Alexander A. Balandin

Abstract: We review the current state of the art of graphene-enhanced thermal interface materials for the management of heat the next generation of electronics. Increased integration densities, speed, and power of electronic and optoelectronic devices require thermal interface materials with substantially higher thermal conductivity, improved reliability, and lower cost. Graphene has emerged as a promising… ▽ More We review the current state of the art of graphene-enhanced thermal interface materials for the management of heat the next generation of electronics. Increased integration densities, speed, and power of electronic and optoelectronic devices require thermal interface materials with substantially higher thermal conductivity, improved reliability, and lower cost. Graphene has emerged as a promising filler material that can meet the demands of future high-speed and high-powered electronics. This review describes the use of graphene as a filler in curing and non-curing polymer matrices. Special attention is given to strategies for achieving the thermal percolation threshold with its corresponding characteristic increase in the overall thermal conductivity. Many applications require high thermal conductivity of the composites while simultaneously preserving electrical insulation. A hybrid filler -- graphene and boron nitride -- approach is presented as possible technology for independent control of electrical and thermal conduction. Reliability and lifespan performance of thermal interface materials is an important consideration towards the determination of appropriate practical applications. The present review addresses these issues in detail, demonstrating the promise of the graphene-enhanced thermal interface materials as compared to alternative technologies. △ Less

Submitted 24 August, 2020; originally announced August 2020.

Comments: 56 pages, 16 figures, 1 large table with accompanying table explaining jargon

Graphene Composites as Efficient Electromagnetic Absorbers in the Extremely High Frequency Band

Authors: Zahra Barani, Fariborz Kargar, Konrad Godziszewski, Adil Rehman, Yevhen Yashchyshyn, Sergey Rumyantsev, Grzegorz Cywiński, Wojciech Knap, Alexander A. Balandin

Abstract: We report on the synthesis of the epoxy-based composites with graphene fillers and testing their electromagnetic shielding efficiency by the quasi-optic free-space method in the extremely high frequency (EHF) band (220 - 325 GHz). The curing adhesive composites were produced by a scalable technique with a mixture of single-layer and few-layer graphene layers of a few-micron lateral dimensions. It… ▽ More We report on the synthesis of the epoxy-based composites with graphene fillers and testing their electromagnetic shielding efficiency by the quasi-optic free-space method in the extremely high frequency (EHF) band (220 - 325 GHz). The curing adhesive composites were produced by a scalable technique with a mixture of single-layer and few-layer graphene layers of a few-micron lateral dimensions. It was found that the electromagnetic transmission, T, is low even at small concentrations of graphene fillers: T<1% at frequency of 300 GHz for a composite with only 1 wt% of graphene. The main shielding mechanism in composites with the low graphene loading is absorption. The composites of 1 mm thickness and graphene loading of 8 wt% provide excellent electromagnetic shielding of 70 dB in the sub-terahertz EHF frequency with negligible energy reflection to the environment. The developed lightweight adhesive composites with graphene fillers can be used as electromagnetic absorbers in the high-frequency microwave radio relays, microwave remote sensors, millimeter wave scanners, and wireless local area networks. △ Less

Submitted 13 April, 2020; originally announced April 2020.

Comments: 28 pages, 6 figures

Journal ref: ACS Appl. Mater. Interfaces, 12, 28635 (2020)

Properties of Shape-Engineered Phoxonic Crystals: Brillouin-Mandelstam Spectroscopy and Ellipsometry Study

Authors: Chun Yu Tammy Huang, Fariborz Kargar, Topojit Debnath, Bishwajit Debnath, Michael D. Valentin, Ron Synowicki, Stefan Schoeche, Roger K. Lake, Alexander A. Balandin

Abstract: We report the results of Brillouin-Mandelstam spectroscopy and Mueller matrix spectroscopic ellipsometry of the nanoscale "pillar with the hat" periodic silicon structures, revealing intriguing phononic and photonic properties. It has been theoretically shown that periodic structures with properly tuned dimensions can act simultaneously as phononic and photonic - phoxonic - crystals, strongly affe… ▽ More We report the results of Brillouin-Mandelstam spectroscopy and Mueller matrix spectroscopic ellipsometry of the nanoscale "pillar with the hat" periodic silicon structures, revealing intriguing phononic and photonic properties. It has been theoretically shown that periodic structures with properly tuned dimensions can act simultaneously as phononic and photonic - phoxonic - crystals, strongly affecting the light-matter interactions. Acoustic phonon states can be tuned by external boundaries, either as a result of phonon confinement effects in individual nanostructures, or as a result of artificially induced external periodicity, as in the phononic crystals. The shape of the nanoscale pillar array was engineered to ensure the interplay of both effects. The Brillouin-Mandelstam spectroscopy data indicated strong flattening of the acoustic phonon dispersion in the frequency range from 2 GHz to 20 GHz and the phonon wave vector extending to the higher-order Brillouin zones. The specifics of the phonon dispersion dependence on the pillar arrays orientation suggest the presence of both periodic modulation and spatial localization effects for the acoustic phonons. The ellipsometry data reveal a distinct scatter pattern of four-fold symmetry due to nanoscale periodicity of the pillar arrays. Our results confirm the dual functionality of the nanostructured shape-engineered structure and indicate a possible new direction for fine-tuning the light-matter interaction in the next generation of photonic, optoelectronic, and phononic devices. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Comments: 25 pages, 7 figures

Coexistence of Magnetic Orders in Two-Dimensional Magnet CrI$_3$

Authors: Ben Niu, Tang Su, Brian A. Francisco, Subhajit Ghosh, Fariborz Kargar, Xiong Huang, Mark Lohmann, Junxue Li, Yadong Xu, Takashi Taniguchi, Kenji Watanabe, Di Wu, Alexander Balandin, Jing Shi, Yong-Tao Cui

Abstract: The magnetic properties in two-dimensional van der Waals materials depend sensitively on structure. CrI3, as an example, has been recently demonstrated to exhibit distinct magnetic properties depending on the layer thickness and stacking order. Bulk CrI3 is ferromagnetic (FM) with a Curie temperature of 61 K and a rhombohedral layer stacking, while few-layer CrI3 has a layered antiferromagnetic (A… ▽ More The magnetic properties in two-dimensional van der Waals materials depend sensitively on structure. CrI3, as an example, has been recently demonstrated to exhibit distinct magnetic properties depending on the layer thickness and stacking order. Bulk CrI3 is ferromagnetic (FM) with a Curie temperature of 61 K and a rhombohedral layer stacking, while few-layer CrI3 has a layered antiferromagnetic (AFM) phase with a lower ordering temperature of 45 K and a monoclinic stacking. In this work, we use cryogenic magnetic force microscopy to investigate CrI3 flakes in the intermediate thickness range (25 - 200 nm) and find that the two types of magnetic orders hence the stacking orders can coexist in the same flake, with a layer of ~13 nm at each surface being in the layered AFM phase similar to few-layer CrI3 and the rest in the bulk FM phase. The switching of the bulk moment proceeds through a remnant state with nearly compensated magnetic moment along the c-axis, indicating formation of c-axis domains allowed by a weak interlayer coupling strength in the rhombohedral phase. Our results provide a comprehensive picture on the magnetism in CrI3 and point to the possibility of engineering magnetic heterostructures within the same material. △ Less

Submitted 27 November, 2019; originally announced November 2019.

Synthesis and Properties of Non-Curing Graphene Thermal Interface Materials

Authors: Sahar Naghibi, Fariborz Kargar, Dylan Wright, Chun Yu Tammy Huang, Amirmahdi Mohammadzadeh, Zahra Barani, Ruben Salgado, Alexander Balandin

Abstract: Development of the next generation thermal interface materials with high thermal conductivity is important for thermal management and packaging of electronic devices. We report on the synthesis and thermal conductivity measurements of non-curing thermal paste, i.e. grease, based on mineral oil with the mixture of graphene and few-layer graphene flakes as the fillers. It was found that graphene the… ▽ More Development of the next generation thermal interface materials with high thermal conductivity is important for thermal management and packaging of electronic devices. We report on the synthesis and thermal conductivity measurements of non-curing thermal paste, i.e. grease, based on mineral oil with the mixture of graphene and few-layer graphene flakes as the fillers. It was found that graphene thermal paste exhibits a distinctive thermal percolation threshold with the thermal conductivity revealing a sublinear dependence on the filler loading. This behavior contrasts with the thermal conductivity of curing graphene thermal interface materials, based on epoxy, where super-linear dependence on the filler loading is observed. The performance of graphene thermal paste was benchmarked against top-of-the-line commercial thermal pastes. The obtained results show that non-curing graphene thermal interface materials outperforms the best commercial pastes in terms of thermal conductivity, at substantially lower filler concentration of ~ 27 vol%. The obtained results shed light on thermal percolation mechanism in non-curing polymeric matrices laden with quasi-two-dimensional fillers. Considering recent progress in graphene production via liquid phase exfoliation and oxide reduction, we argue that our results open a pathway for large-scale industrial application of graphene in thermal management of electronics. △ Less

Submitted 23 November, 2019; originally announced November 2019.

Comments: 29 pages, 7 figures

Journal ref: Advanced Electronic Materials, 1901303 (2020)

Amplitude and Phase Noise of Magnons

Authors: Sergey Rumyantsev, Michael Balinskiy, Fariborz Kargar, Alexander Khitun, Alexander A. Balandin

Abstract: The low-frequency amplitude and phase noise spectra of magnetization waves, i.e. magnons, was measured in the yttrium iron garnet (YIG) waveguides. This type of noise, which originates from the fluctuations of the physical properties of the YIG crystals, has to be taken into account in the design of YIG-based RF generators and magnonic devices for data processing, sensing and imaging applications.… ▽ More The low-frequency amplitude and phase noise spectra of magnetization waves, i.e. magnons, was measured in the yttrium iron garnet (YIG) waveguides. This type of noise, which originates from the fluctuations of the physical properties of the YIG crystals, has to be taken into account in the design of YIG-based RF generators and magnonic devices for data processing, sensing and imaging applications. It was found that the amplitude noise level of magnons depends strongly on the power level, increasing sharply at the on-set of nonlinear dissipation. The noise spectra of both the amplitude and phase noise have the Lorentzian shape with the characteristic frequencies below 100 Hz. △ Less

Submitted 30 August, 2019; originally announced September 2019.

Comments: 4 pages, 5 figures

Phonon and Thermal Properties of Quasi-Two-Dimensional FePS3 and MnPS3 Antiferromagnetic Semiconductor Materials

Authors: Fariborz Kargar, Ece Aytan, Subhajit Ghosh, Jonathan Lee, Michael Gomez, Yuhang Liu, Andres Sanchez Magana, Zahra Barani Beiranvand, Bishwajit Debnath, Richard Wilson, Roger K. Lake, Alexander A. Balandin

Abstract: We report results of investigation of the phonon and thermal properties of the exfoliated films of layered single crystals of antiferromagnetic FePS3 and MnPS3 semiconductors. The Raman spectroscopy was conducted using three different excitation lasers with the wavelengths of 325 nm (UV), 488 nm (blue), and 633 nm (red). The resonant UV-Raman spectroscopy reveals new spectral features, which are n… ▽ More We report results of investigation of the phonon and thermal properties of the exfoliated films of layered single crystals of antiferromagnetic FePS3 and MnPS3 semiconductors. The Raman spectroscopy was conducted using three different excitation lasers with the wavelengths of 325 nm (UV), 488 nm (blue), and 633 nm (red). The resonant UV-Raman spectroscopy reveals new spectral features, which are not detectable via visible Raman light scattering. The thermal conductivity of FePS3 and MnPS3 thin films was measured by two different techniques: the steady-state Raman optothermal and transient time-resolved magneto-optical Kerr effect. The Raman optothermal measurements provided the orientation-average thermal conductivity of FePS3 to be 1.35 W/mK at room temperature. The transient measurements revealed that the through-plane and in-plane thermal conductivity of FePS3 is 0.85 W/mK and 2.7 W/mK, respectively. The films of MnPS3 have higher thermal conductivity of 1.1 W/mK through-plane and 6.3 W/mK in-plane. The data obtained by both techniques reveal strong thermal anisotropy of the films and the dominant contribution of phonons to heat conduction. Our results are important for the proposed applications of the antiferromagnetic semiconductor thin films in spintronic devices. △ Less

Submitted 14 August, 2019; originally announced August 2019.

Comments: 43 pages, 8 figures

Journal ref: ACS Nano, 14, 2, 2424 (2020)

Low-Frequency Electronic Noise in Superlattice and Random-Packed Thin Films of Colloidal Quantum Dots

Authors: Adane Geremew, Caroline Qian, Alex Abelson, Sergey Rumyantsev, Fariborz Kargar, Matt Law, Alexander A. Balandin

Abstract: We report measurements of low-frequency electronic noise in ordered superlattice, weakly-ordered and random-packed thin films of 6.5 nm PbSe quantum dots prepared using several different ligand chemistries. For all samples, the normalized noise spectral density of the dark current revealed a Lorentzian component, reminiscent of the generation-recombination noise, superimposed on the 1/f background… ▽ More We report measurements of low-frequency electronic noise in ordered superlattice, weakly-ordered and random-packed thin films of 6.5 nm PbSe quantum dots prepared using several different ligand chemistries. For all samples, the normalized noise spectral density of the dark current revealed a Lorentzian component, reminiscent of the generation-recombination noise, superimposed on the 1/f background (f is the frequency). An activation energy of 0.3 eV was extracted from the temperature dependence of the noise spectra. The noise level in the ordered films was lower than that in the weakly-ordered and random-packed films. A large variation in the magnitude of the noise spectral density was also observed in samples with different ligand treatments. The obtained results are important for application of colloidal quantum dot films in photodetectors. △ Less

Submitted 10 August, 2019; originally announced August 2019.

Comments: 24 pages, 6 figures and supplemental info

Journal ref: Nanoscale, 11, 20171 (2019)

Thermal Properties of the Binary-Filler Composites with Few-Layer Graphene and Copper Nanoparticles

Authors: Zahra Barani, Amirmahdi Mohammadzadeh, Adane Geremew, Chun Yu Tammy Huang, Devin Coleman, Lorenzo Mangolini, Fariborz Kargar, Alexander A. Balandin

Abstract: The thermal properties of an epoxy-based binary composites comprised of graphene and copper nanoparticles are reported. It is found that the "synergistic" filler effect, revealed as a strong enhancement of the thermal conductivity of composites with the size-dissimilar fillers, has a well-defined filler loading threshold. The thermal conductivity of composites with a moderate graphene concentratio… ▽ More The thermal properties of an epoxy-based binary composites comprised of graphene and copper nanoparticles are reported. It is found that the "synergistic" filler effect, revealed as a strong enhancement of the thermal conductivity of composites with the size-dissimilar fillers, has a well-defined filler loading threshold. The thermal conductivity of composites with a moderate graphene concentration of ~15 wt% exhibits an abrupt increase as the loading of copper nanoparticles approaches ~40 wt%, followed by saturation. The effect is attributed to intercalation of spherical copper nanoparticles between the large graphene flakes, resulting in formation of the highly thermally conductive percolation network. In contrast, in composites with a high graphene concentration, ~40 wt%, the thermal conductivity increases linearly with addition of copper nanoparticles. The electrical percolation is observed at low graphene loading, less than 7 wt.%, owing to the large aspect ratio of graphene. At all concentrations of the fillers, below and above the electrical percolation threshold, the thermal transport is dominated by phonons. The obtained results shed light on the interaction between graphene fillers and copper nanoparticles in the composites and demonstrate potential of such hybrid epoxy composites for practical applications in thermal interface materials and adhesives. △ Less

Submitted 21 May, 2019; originally announced May 2019.

Comments: 25 pages, 4 figures

Journal ref: Advanced Functional Materials, 1904008 (2019)

Brillouin-Mandelstam Spectroscopy of Stress-Modulated Spatially Confined Spin Waves in Ni Thin Films on Piezoelectric Heterostructures

Authors: Fariborz Kargar, Michael Balinskiy, Howard Chiang, Andres Chavez, John Nance, Alexander Khitun, Gregory P. Carman, Alexander A. Balandin

Abstract: We report results of micro-Brillouin-Mandelstam light scattering spectroscopy of thermal magnons in the two-phase synthetic multiferroic structure consisting of a piezoelectric (PMN-PT) substrate and a Ni thin film with the thickness of 64 nm. The experimental data reveal the first two modes of the perpendicular standing spin waves (PSSW) spatially confined across the Ni thin film. A theoretical a… ▽ More We report results of micro-Brillouin-Mandelstam light scattering spectroscopy of thermal magnons in the two-phase synthetic multiferroic structure consisting of a piezoelectric (PMN-PT) substrate and a Ni thin film with the thickness of 64 nm. The experimental data reveal the first two modes of the perpendicular standing spin waves (PSSW) spatially confined across the Ni thin film. A theoretical analysis of the frequency dependence of the PSSW peaks on the external magnetic field reveals the asymmetric boundary condition, i.e. pinning, for variable magnetization at different surfaces of the Ni thin film. The strain field induced by applying DC voltage to PMN-PT substrate leads to a down shift of PSSW mode frequency owing to the magneto-elastic effect in Ni, and corresponding changes in the spin wave resonance conditions. The observed non-monotonic dependence of the PSSW frequency on DC voltage is related to an abrupt change of the pinning parameter at certain values of the voltage. The obtained results are important for understanding the thermal magnon spectrum in ferromagnetic films and development of the low-power spin-wave devices. △ Less

Submitted 21 April, 2019; originally announced April 2019.

Comments: 15 pages, 6 figures

Electric Switching of the Charge-Density-Wave and Normal Metallic Phases in Tantalum Disulfide Thin-Film Devices

Authors: A. Geremew, S. Rumyantsev, F. Kargar, B. Debnath, A. Nosek, M. Bloodgood, M. Bockrath, T. Salguero, R. K. Lake, A. A. Balandin

Abstract: We report on switching among three charge-density-wave phases - commensurate, nearly commensurate, incommensurate - and the high-temperature normal metallic phase in thin-film 1T-TaS2 devices induced by application of an in-plane electric field. The electric switching among all phases has been achieved over a wide temperature range, from 77 K to 400 K. The low-frequency electronic noise spectrosco… ▽ More We report on switching among three charge-density-wave phases - commensurate, nearly commensurate, incommensurate - and the high-temperature normal metallic phase in thin-film 1T-TaS2 devices induced by application of an in-plane electric field. The electric switching among all phases has been achieved over a wide temperature range, from 77 K to 400 K. The low-frequency electronic noise spectroscopy has been used as an effective tool for monitoring the transitions, particularly the switching from the incommensurate charge-density-wave phase to the normal metal phase. The noise spectral density exhibits sharp increases at the phase transition points, which correspond to the step-like changes in resistivity. Assignment of the phases is consistent with low-field resistivity measurements over the temperature range from 77 K to 600 K. Analysis of the experimental data and calculations of heat dissipation suggest that Joule heating plays a dominant role in the electric-field induced transitions in the tested 1T-TaS2 devices on Si/SiO2 substrates. The possibility of electrical switching among four different phases of 1T-TaS2 is a promising step toward nanoscale device applications. The results also demonstrate the potential of noise spectroscopy for investigating and identifying phase transitions in materials. △ Less

Submitted 14 March, 2019; originally announced March 2019.

Comments: 32 pages, 7 figures

Journal ref: ACS Nano, 13, 7231 (2019)

Thermal and Electrical Properties of Hybrid Composites with Graphene and Boron Nitride Fillers

Authors: Jacob S. Lewis, Zahra Barani, Andres Sanchez Magana, Fariborz Kargar, Alexander A. Balandin

Abstract: We report on the thermal and electrical properties of hybrid epoxy composites with graphene and boron nitride fillers. The thicknesses, lateral dimensions, and aspect ratios of each filler material were intentionally selected for geometric similarity to one another, in contrast to prior studies that utilized dissimilar filler geometries to achieve a "synergistic" effect. We demonstrate that the el… ▽ More We report on the thermal and electrical properties of hybrid epoxy composites with graphene and boron nitride fillers. The thicknesses, lateral dimensions, and aspect ratios of each filler material were intentionally selected for geometric similarity to one another, in contrast to prior studies that utilized dissimilar filler geometries to achieve a "synergistic" effect. We demonstrate that the electrically-conductive graphene and electrically-insulating boron nitride fillers allow one to effectively engineer the thermal and electrical conductivities of their resulting composites. By varying the constituent fraction of boron nitride to graphene in a composite with ~44% total filler loading, one can tune the thermal conductivity enhancement from a factor of x15 to x35 and increase the electrical conductivity by many orders of magnitude. The obtained results are important for the development of next-generation thermal interface materials with controllable electrical properties necessary for applications requiring either electrical grounding or insulation. △ Less

Submitted 3 March, 2019; originally announced March 2019.

Comments: 32 pages; 5 figures

Journal ref: Materials Research Express, 6, 085325 (2019)

Low-Frequency Noise Spectroscopy of Charge-Density-Wave Phase Transitions in Vertical Quasi-2D Devices

Authors: Ruben Salgado, Amirmahdi Mohammadzadeh, Fariborz Kargar, Adane Geremew, Chun-Yu Huang, Matthew A. Bloodgood, Sergey Rumyantsev, Tina T. Salguero, Alexander A. Balandin

Abstract: We report results regarding the electron transport in vertical quasi-2D layered 1T-TaS2 charge-density-wave devices. The low-frequency noise spectroscopy was used as a tool to study changes in the cross-plane electrical characteristics of the quasi-2D material below room temperature. The noise spectral density revealed strong peaks - changing by more than an order-of-magnitude - at the temperature… ▽ More We report results regarding the electron transport in vertical quasi-2D layered 1T-TaS2 charge-density-wave devices. The low-frequency noise spectroscopy was used as a tool to study changes in the cross-plane electrical characteristics of the quasi-2D material below room temperature. The noise spectral density revealed strong peaks - changing by more than an order-of-magnitude - at the temperatures closely matching the electrical resistance steps. Some of the noise peaks appeared below the temperature of the commensurate to nearly-commensurate charge-density-wave transition, possibly indicating the presence of the debated "hidden" phase transitions. These results confirm the potential of the noise spectroscopy for investigations of electron transport and phase transitions in novel materials. △ Less

Submitted 5 January, 2019; originally announced January 2019.

Comments: 16 pages; 5 figures

Journal ref: Applied Physics Express, 12, 037001 (2019)

Proton-Irradiation-Immune Electronics Implemented with Two-Dimensional Charge-Density-Wave Devices

Authors: A. Geremew, F. Kargar, E. X. Zhang, S. E. Zhao, E. Aytan, M. A. Bloodgood, T. T. Salguero, S. Rumyantsev, A. Fedoseyev, D. M. Fleetwood, A. A. Balandin

Abstract: Proton radiation damage is an important failure mechanism for electronic devices in near-Earth orbits, deep space and high energy physics facilities. Protons can cause ionizing damage and atomic displacements, resulting in device degradation and malfunction. Shielding of electronics increases the weight and cost of the systems but does not eliminate destructive single events produced by energetic… ▽ More Proton radiation damage is an important failure mechanism for electronic devices in near-Earth orbits, deep space and high energy physics facilities. Protons can cause ionizing damage and atomic displacements, resulting in device degradation and malfunction. Shielding of electronics increases the weight and cost of the systems but does not eliminate destructive single events produced by energetic protons. Modern electronics based on semiconductors - even those specially designed for radiation hardness - remain highly susceptible to proton damage. Here we demonstrate that room temperature (RT) charge-density-wave (CDW) devices with quasi-two-dimensional (2D) 1T-TaS2 channels show remarkable immunity to bombardment with 1.8 MeV protons to a fluence of at least 10^14 H+cm^2. Current-voltage I-V characteristics of these 2D CDW devices do not change as a result of proton irradiation, in striking contrast to most conventional semiconductor devices or other 2D devices. Only negligible changes are found in the low-frequency noise spectra. The radiation immunity of these "all-metallic" CDW devices can be attributed to their two-terminal design, quasi-2D nature of the active channel, and high concentration of charge carriers in the utilized CDW phases. Such devices, capable of operating over a wide temperature range, can constitute a crucial segment of future electronics for space, particle accelerator and other radiation environments. △ Less

Submitted 2 January, 2019; originally announced January 2019.

Comments: 18 pages, 2 display items

Journal ref: Nanoscale, 11, 8380 - 8386 (2019)

Strong Hot Carrier Effects Observed in a Single Nanowire Heterostructure

Authors: Iraj Abbasian Shojaei, Samuel Linser, Giriraj Jnawali, N. Wickramasuriya, Howard E. Jackson, Leigh M. Smith, Fariborz Kargar, Alexander A. Balandin, Xiaoming Yuan, Philip Caroff, H. Hoe Tan, Chennupati Jagadish

Abstract: We use Transient Rayleigh Scattering to study the thermalization of hot photoexcited carriers in single GaAsSb/InP nanowire heterostructures. By comparing the energy loss rate in single bare GaAsSb nanowires which do not show substantial hot carrier effects with the core-shell nanowires, we show that the presence of an InP shell substantially suppresses the LO phonon emission rate at low temperatu… ▽ More We use Transient Rayleigh Scattering to study the thermalization of hot photoexcited carriers in single GaAsSb/InP nanowire heterostructures. By comparing the energy loss rate in single bare GaAsSb nanowires which do not show substantial hot carrier effects with the core-shell nanowires, we show that the presence of an InP shell substantially suppresses the LO phonon emission rate at low temperatures leading to strong hot carrier effects. △ Less

Submitted 16 September, 2019; v1 submitted 29 October, 2018; originally announced October 2018.

Comments: 17 pages, 5 figures

Journal ref: Nano Letters 19, 5062-5069 (2019)

The Discrete Noise of Magnons

Authors: S. Rumyantsev, M. Balinskiy, F. Kargar, A. Khitun, A. A. Balandin

Abstract: Magnonics is a rapidly developing subfield of spintronics, which deals with devices and circuits that utilize spin currents carried by magnons - quanta of spin waves. Magnon current, i.e. spin waves, can be used for information processing, sensing, and other applications. A possibility of using the amplitude and phase of magnons for sending signals via electrical insulators creates conditions for… ▽ More Magnonics is a rapidly developing subfield of spintronics, which deals with devices and circuits that utilize spin currents carried by magnons - quanta of spin waves. Magnon current, i.e. spin waves, can be used for information processing, sensing, and other applications. A possibility of using the amplitude and phase of magnons for sending signals via electrical insulators creates conditions for avoiding Ohmic losses, and achieving ultra-low power dissipation. Most of the envisioned magnonic logic devices are based on spin wave interference, where the minimum energy per operation is limited by the noise level. The sensitivity and selectivity of magnonic sensors is also limited by the low frequency noise. However, the fundamental question "do magnons make noise?" has not been answered yet. It is not known how noisy magnonic devices are compared to their electronic counterparts. Here we show that the low-frequency noise of magnonic devices is dominated by the random telegraph signal noise rather than 1/f noise - a striking contrast to electronic devices (f is a frequency). We found that the noise level of surface magnons depends strongly on the power level, increasing sharply at the on-set of nonlinear dissipation. The presence of the random telegraph signal noise indicates that the current fluctuations involve random discrete macro events. We anticipate that our results will help in developing the next generation of magnonic devices for information processing and sensing. △ Less

Submitted 2 October, 2018; originally announced October 2018.

Comments: 18 pages; 3 figures

Journal ref: Applied Physics Letters, 114, 090601 (2019)

Graphene Composites with Dual Functionality: Electromagnetic Shielding and Thermal Management

Authors: Fariborz Kargar, Zahra Barani, Michael G. Balinskiy, Andres Sanchez Magana, Jacob S. Lewis, Alexander A. Balandin

Abstract: We report on the synthesis and characterization of the epoxy-based composites with the few-layer graphene fillers, which are capable of the duel functional applications. It was found that composites with the certain types of few-layer graphene fillers reveal an efficient total electromagnetic interference shielding, SE~45 dB, in the important X-band frequency range, f=8.2 GHz - 12.4 GHz, while sim… ▽ More We report on the synthesis and characterization of the epoxy-based composites with the few-layer graphene fillers, which are capable of the duel functional applications. It was found that composites with the certain types of few-layer graphene fillers reveal an efficient total electromagnetic interference shielding, SE~45 dB, in the important X-band frequency range, f=8.2 GHz - 12.4 GHz, while simultaneously providing the high thermal conductivity, K = 8 W/mK, which is a factor of x35 larger than that of the base matrix material. The efficiency of the dual functional application depends on the filler characteristics: thickness, lateral dimensions, aspect ratio and concentration. Graphene loading fractions above the percolation threshold allow for strong enhancement of both the electromagnetic interference shielding and heat conduction properties. Interestingly, graphene composites can block the electromagnetic energy even below the percolation threshold, remaining electrically insulating, which is an important feature for some types of thermal interface materials. The dual functionality of the graphene composites can substantially improve the electromagnetic shielding and thermal management of the airborne systems while simultaneously reducing their weight and cost. △ Less

Submitted 9 August, 2018; originally announced August 2018.

Comments: 24 pages; 4 figures

Journal ref: Advanced Electronic Materials, 5, 1800558 (2019)

Thermal Percolation Threshold and Thermal Properties of Composites with Graphene and Boron Nitride Fillers

Authors: Fariborz Kargar, Zahra Barani, Jacob S. Lewis, Bishwajit Debnath, Ruben Salgado, Ece Aytan, Roger Lake, Alexander A. Balandin

Abstract: We investigated thermal properties of the epoxy-based composites with a high loading fraction - up to f=45 vol.% - of the randomly oriented electrically conductive graphene fillers and electrically insulating boron nitride fillers. It was found that both types of the composites revealed a distinctive thermal percolation threshold at the loading fraction f>20 vol.%. The graphene loading required fo… ▽ More We investigated thermal properties of the epoxy-based composites with a high loading fraction - up to f=45 vol.% - of the randomly oriented electrically conductive graphene fillers and electrically insulating boron nitride fillers. It was found that both types of the composites revealed a distinctive thermal percolation threshold at the loading fraction f>20 vol.%. The graphene loading required for achieving the thermal percolation was substantially higher than the loading for the electrical percolation. Graphene fillers outperformed boron nitride fillers in the thermal conductivity enhancement. It was established that thermal transport in composites with the high filler loading, above the thermal percolation threshold, is dominated by heat conduction via the network of percolating fillers. Unexpectedly, we determined that the thermal transport properties of the high loading composites were influenced strongly by the cross-plane thermal conductivity of the quasi-two-dimensional fillers. The obtained results shed light on the debated mechanism of the thermal percolation, and facilitate the development of the next generation of the efficient thermal interface materials for electronic applications. △ Less

Submitted 10 July, 2018; originally announced July 2018.

Comments: 29 pages; 5 figures

Journal ref: ACS Appl. Mater. Interfaces, 10, 37555 (2018)

Acoustic Phonon Dispersion Engineering in Bulk Crystals via Incorporation of Dopant Atoms

Authors: Fariborz Kargar, Elias H. Penilla, Ece Aytan, Jacob S. Lewis, Javier E. Garay, Alexander A. Balandin

Abstract: We report results of Brillouin - Mandelstam spectroscopy of transparent alumina crystals with Nd dopants. The ionic radius and atomic mass of Nd atoms are distinctively different from those of the host Al atoms. Our results show that even a small concentration of Nd atoms incorporated into the alumina samples produces a profound change in the acoustic phonon spectrum. The velocity of the transvers… ▽ More We report results of Brillouin - Mandelstam spectroscopy of transparent alumina crystals with Nd dopants. The ionic radius and atomic mass of Nd atoms are distinctively different from those of the host Al atoms. Our results show that even a small concentration of Nd atoms incorporated into the alumina samples produces a profound change in the acoustic phonon spectrum. The velocity of the transverse acoustic phonons decreases by ~600 m/s at the Nd density of only ~0.1 %. Interestingly, the decrease in the phonon frequency and velocity with the doping concentration is non-monotonic. The obtained results, demonstrating that modification of the acoustic phonon spectrum can be achieved not only by nanostructuring but also by doping have important implications for thermal management as well as thermoelectric and optoelectronic devices. △ Less

Submitted 23 March, 2018; originally announced March 2018.

Comments: 16 pages, 4 figures

Journal ref: Applied Physics Letters, 112, 191902 (2018)

Spin - Phonon Coupling in Nickel Oxide Determined from Ultraviolet Raman Spectroscopy

Authors: E. Aytan, B. Debnath, F. Kargar, Y. Barlas, M. M. Lacerda, J. X. Li, R. K. Lake, J. Shi, A. A. Balandin

Abstract: Nickel oxide (NiO) has been studied extensively for various applications ranging from electrochemistry to solar cells [1,2]. In recent years, NiO attracted much attention as an antiferromagnetic (AF) insulator material for spintronic devices [3-10]. Understanding the spin - phonon coupling in NiO is a key to its functionalization, and enabling AF spintronics' promise of ultra-high-speed and low-po… ▽ More Nickel oxide (NiO) has been studied extensively for various applications ranging from electrochemistry to solar cells [1,2]. In recent years, NiO attracted much attention as an antiferromagnetic (AF) insulator material for spintronic devices [3-10]. Understanding the spin - phonon coupling in NiO is a key to its functionalization, and enabling AF spintronics' promise of ultra-high-speed and low-power dissipation [11,12]. However, despite its status as an exemplary AF insulator and a benchmark material for the study of correlated electron systems, little is known about the spin - phonon interaction, and the associated energy dissipation channel, in NiO. In addition, there is a long-standing controversy over the large discrepancies between the experimental and theoretical values for the electron, phonon, and magnon energies in NiO [13-23]. This gap in knowledge is explained by NiO optical selection rules, high Neel temperature and dominance of the magnon band in the visible Raman spectrum, which precludes a conventional approach for investigating such interaction. Here we show that by using ultraviolet (UV) Raman spectroscopy one can extract the spin - phonon coupling coefficients in NiO. We established that unlike in other materials, the spins of Ni atoms interact more strongly with the longitudinal optical (LO) phonons than with the transverse optical (TO) phonons, and produce opposite effects on the phonon energies. The peculiarities of the spin - phonon coupling are consistent with the trends given by density functional theory calculations. The obtained results shed light on the nature of the spin - phonon coupling in AF insulators and may help in developing innovative spintronic devices. △ Less

Submitted 17 October, 2017; originally announced October 2017.

Comments: 16 pages; 2 figures

Journal ref: Applied Physics Letters, 111, 252402 (2017)

Inelastic Light Scattering Spectroscopy of Magnons and Phonons in Nickel Oxide: Effects of Temperature

Authors: M. M. Lacerda, F. Kargar, E. Aytan, R. Samnakay, B. Debnath, J. X. Li, A. Khitun, R. K. Lake, J. Shi, A. A. Balandin

Abstract: We report results of an investigation of the temperature dependence of the magnon and phonon frequencies in NiO. A combination of Brillouin - Mandelstam and Raman spectroscopies allowed us to elucidate the evolution of the phonon and magnon spectral signatures from the Brillouin zone center (GHz range) to the second-order peaks from the zone boundary (THz range). The temperature-dependent behavior… ▽ More We report results of an investigation of the temperature dependence of the magnon and phonon frequencies in NiO. A combination of Brillouin - Mandelstam and Raman spectroscopies allowed us to elucidate the evolution of the phonon and magnon spectral signatures from the Brillouin zone center (GHz range) to the second-order peaks from the zone boundary (THz range). The temperature-dependent behavior of the magnon and phonon bands in the NiO spectrum indicates the presence of antiferromagnetic (AF) order fluctuation or a persistent AF state at temperatures above the Neel temperature (T=523 K). Tuning the intensity of the excitation laser provides a method for disentangling the features of magnons from acoustic phonons without the application of a magnetic field. Our results are useful for interpretation of the inelastic-light scattering spectrum of NiO, and add to the knowledge of its magnon properties important for THz spintronic devices. △ Less

Submitted 14 February, 2017; originally announced February 2017.

Comments: 12 pages; 4 figures

Journal ref: Applied Physics Letters, 110, 202406 (2017)

Direct Observation of Acoustic Phonon Confinement in Free-Standing Semiconductor Nanowires

Authors: Fariborz Kargar, Bishwajit Debnath, Kakko Joona-Pekko, Antti Saynatjoki, Harri Lipsanen, Denis Nika, Roger Lake, Alexander A. Balandin

Abstract: Similar to electron waves, the phonon states in semiconductors can undergo changes induced by external boundaries. Modification of acoustic phonon spectrum in structures with periodically modulated elastic constant or mass density - referred to as phononic crystals - has been proven experimentally and utilized in practical applications. A possibility of modifying acoustic phonon spectrum in indivi… ▽ More Similar to electron waves, the phonon states in semiconductors can undergo changes induced by external boundaries. Modification of acoustic phonon spectrum in structures with periodically modulated elastic constant or mass density - referred to as phononic crystals - has been proven experimentally and utilized in practical applications. A possibility of modifying acoustic phonon spectrum in individual nanostructures via spatial confinement would bring tremendous benefits for controlling phonon-electron interaction and thermal conduction at nanoscale. However, despite strong scientific and practical importance, conclusive experimental evidence of acoustic phonon confinement in individual free-standing nanostructures, e.g. nanowires, is still missing. The length scale, at which phonon dispersion undergoes changes and a possibility of the phonon group velocity reduction, are debated. Here, we utilize specially designed high-quality GaAs nanowires (NWs) with different diameters, D, and large inter-nanowire distances to directly demonstrate acoustic phonon confinement. The measurements conducted with Brillouin - Mandelstam spectroscopy reveal confined phonon polarization branches with frequencies from 4 GHz to 40 GHz in NWs with D as large as ~128 nm, i.e. at length scale, which exceeds the "grey" phonon mean-free path in GaAs by an almost an order of magnitude. The phonon dispersion modification and phonon energy scaling with D in individual nanowires are in excellent agreement with theory. The obtained results can lead to more efficient nanoscale control of acoustic phonons, with benefits for nanoelectronics, thermoelectric energy conversion, thermal management, and novel spintronic technologies. △ Less

Submitted 29 August, 2016; originally announced August 2016.

Comments: 20 pages; 3 figures

Journal ref: Nature Communications, 7, 13400 (2016)