-
Broadband dual-comb hyperspectral imaging and adaptable spectroscopy with programmable frequency combs
Authors:
Fabrizio R. Giorgetta,
Jean-Daniel Deschênes,
Richard L. Lieber,
Ian Coddington,
Nathan R. Newbury,
Esther Baumann
Abstract:
We explore the advantages of a free-form dual-comb spectroscopy (DCS) platform based on time-programmable frequency combs for real-time, penalty-free apodized scanning. In traditional DCS, the fundamental spectral resolution, which equals the comb repetition rate, can be excessively fine for many applications. While the fine resolution is not itself problematic, it comes with the penalty of excess…
▽ More
We explore the advantages of a free-form dual-comb spectroscopy (DCS) platform based on time-programmable frequency combs for real-time, penalty-free apodized scanning. In traditional DCS, the fundamental spectral resolution, which equals the comb repetition rate, can be excessively fine for many applications. While the fine resolution is not itself problematic, it comes with the penalty of excess acquisition time. Post-processing apodization (windowing) can be applied to tailor the resolution to the sample, but only with a deadtime penalty proportional to the degree of apodization. The excess acquisition time remains. With free-form DCS, this deadtime is avoided by programming a real-time apodization pattern that dynamically reverses the pulse periods between the dual frequency combs. In this way, one can tailor the spectrometer's resolution and update rate to different applications without penalty. We show operation of a free-form DCS system where the spectral resolution is varied from the intrinsic fine resolution of 160 MHz up to 822 GHz by applying tailored real-time apodization. Because there is no deadtime penalty, the spectral signal-to-noise ratio increases linearly with resolution by 5000x over this range, as opposed to the square root increase observed for postprocessing apodization in traditional DCS. We explore the flexibility to change resolution and update rate to perform hyperspectral imaging at slow camera frame rates, where the penalty-free apodization allows for optimal use of each frame. We obtain dual-comb hyperspectral movies at a 20 Hz spectrum update rate with broad optical spectral coverage of over 10 THz.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
Quantum-limited optical time transfer for future geosynchronous links
Authors:
Emily D. Caldwell,
Jean-Daniel Deschenes,
Jennifer Ellis,
William C. Swann,
Benjamin K. Stuhl,
Hugo Bergeron,
Nathan R. Newbury,
Laura C. Sinclair
Abstract:
The combination of optical time transfer and optical clocks opens up the possibility of large-scale free-space networks that connect both ground-based optical clocks and future space-based optical clocks. Such networks promise better tests of general relativity, dark matter searches, and gravitational wave detection. The ability to connect optical clocks to a distant satellite could enable space-b…
▽ More
The combination of optical time transfer and optical clocks opens up the possibility of large-scale free-space networks that connect both ground-based optical clocks and future space-based optical clocks. Such networks promise better tests of general relativity, dark matter searches, and gravitational wave detection. The ability to connect optical clocks to a distant satellite could enable space-based very long baseline interferometry (VLBI), advanced satellite navigation, clock-based geodesy, and thousand-fold improvements in intercontinental time dissemination. Thus far, only optical clocks have pushed towards quantum-limited performance. In contrast, optical time transfer has not operated at the analogous quantum limit set by the number of received photons. Here, we demonstrate time transfer with near quantum-limited acquisition and timing at 10,000 times lower received power than previous approaches. Over 300 km between mountaintops in Hawaii with launched powers as low as 40 $μ$W, distant timescales are synchronized to 320 attoseconds. This nearly quantum-limited operation is critical for long-distance free-space links where photons are few and amplification costly -- at 4.0 mW transmit power, this approach can support 102 dB link loss, more than sufficient for future time transfer to geosynchronous orbits.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
The Time Programmable Frequency Comb: Generation and Application to Quantum-Limited Dual-Comb Ranging
Authors:
Emily D. Caldwell,
Laura C. Sinclair,
Nathan R. Newbury,
Jean-Daniel Deschenes
Abstract:
The classic self-referenced frequency comb acts as an unrivaled ruler for precision optical metrology in both time and frequency. Two decades after its invention, the frequency comb is now used in numerous active sensing applications. Many of these applications, however, are limited by the tradeoffs inherent in the rigidity of the comb output and operate far from quantum-limited sensitivity. Here…
▽ More
The classic self-referenced frequency comb acts as an unrivaled ruler for precision optical metrology in both time and frequency. Two decades after its invention, the frequency comb is now used in numerous active sensing applications. Many of these applications, however, are limited by the tradeoffs inherent in the rigidity of the comb output and operate far from quantum-limited sensitivity. Here we demonstrate an agile programmable frequency comb where the pulse time and phase are digitally controlled with +/- 2 attosecond accuracy. This agility enables quantum-limited sensitivity in sensing applications since the programmable comb can be configured to coherently track weak returning pulse trains at the shot-noise limit. To highlight its capabilities, we use this programmable comb in a ranging system, reducing the detection threshold by ~5,000-fold to enable nearly quantum-limited ranging at mean pulse photon number of 1/77 while retaining the full accuracy and precision of a rigid frequency comb. Beyond ranging and imaging, applications in time/frequency metrology, comb-based spectroscopy, pump-probe experiments, and compressive sensing should benefit from coherent control of the comb-pulse time and phase.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Fundamental Physics with a State-of-the-Art Optical Clock in Space
Authors:
Andrei Derevianko,
Kurt Gibble,
Leo Hollberg,
Nathan R. Newbury,
Chris Oates,
Marianna S. Safronova,
Laura C. Sinclair,
Nan Yu
Abstract:
Recent advances in optical atomic clocks and optical time transfer have enabled new possibilities in precision metrology for both tests of fundamental physics and timing applications. Here we describe a space mission concept that would place a state-of-the-art optical atomic clock in an eccentric orbit around Earth. A high stability laser link would connect the relative time, range, and velocity o…
▽ More
Recent advances in optical atomic clocks and optical time transfer have enabled new possibilities in precision metrology for both tests of fundamental physics and timing applications. Here we describe a space mission concept that would place a state-of-the-art optical atomic clock in an eccentric orbit around Earth. A high stability laser link would connect the relative time, range, and velocity of the orbiting spacecraft to earthbound stations. The primary goal for this mission would be to test the gravitational redshift, a classical test of general relativity, with a sensitivity 30,000 times beyond current limits. Additional science objectives include other tests of relativity, enhanced searches for dark matter and drifts in fundamental constants, and establishing a high accuracy international time/geodesic reference.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
Open-path Dual-comb Spectroscopy for Multispecies Trace Gas Detection in the 4.5 μm to 5 μm Spectral Region
Authors:
Fabrizio R. Giorgetta,
Jeff Peischl,
Daniel I. Herman,
Gabriel Ycas,
Ian Coddington,
Nathan R. Newbury,
Kevin C. Cossel
Abstract:
Open-path dual-comb spectroscopy provides multi-species atmospheric gas concentration measurements with high precision. Here, we extend open-path dual comb spectroscopy to the mid-infrared 5 μm atmospheric window, enabling atmospheric concentration retrievals of the primary greenhouse gases, N$_2$O, CO$_2$, and H$_2$O as well as the criterion air pollutants O$_3$ and CO across 600 m and 2 km round…
▽ More
Open-path dual-comb spectroscopy provides multi-species atmospheric gas concentration measurements with high precision. Here, we extend open-path dual comb spectroscopy to the mid-infrared 5 μm atmospheric window, enabling atmospheric concentration retrievals of the primary greenhouse gases, N$_2$O, CO$_2$, and H$_2$O as well as the criterion air pollutants O$_3$ and CO across 600 m and 2 km round-trip paths. We demonstrate measurements over a five-day period at two-minute temporal resolution with 80% uptime. The achieved precision is sufficient to resolve the atmospheric concentration variations of the multiple gas species; retrieved dry mixing ratios of CO and N$_2$O are in good agreement with a co-located point sensor. In addition, the retrieved ratio of excess CO vs CO$_2$ agrees with similar urban studies but disagrees with the US National Emission Inventory by a factor of 3. Our retrieved ratio of excess N$_2$O vs CO$_2$ exhibits a plume-dependent value, indicating the variability of sources of the greenhouse gas N$_2$O.
△ Less
Submitted 22 December, 2020;
originally announced December 2020.
-
Optical Atomic Clock Comparison through Turbulent Air
Authors:
Martha I. Bodine,
Jean-Daniel Deschênes,
Isaac H. Khader,
William C. Swann,
Holly Leopardi,
Kyle Beloy,
Tobias Bothwell,
Samuel M. Brewer,
Sarah L. Bromley,
Jwo-Sy Chen,
Scott A. Diddams,
Robert J. Fasano,
Tara M. Fortier,
Youssef S. Hassan,
David B. Hume,
Dhruv Kedar,
Colin J. Kennedy,
Amanda Koepke,
David R. Leibrandt,
Andrew D. Ludlow,
William F. McGrew,
William R. Milner,
Daniele Nicolodi,
Eric Oelker,
Thomas E. Parker
, et al. (10 additional authors not shown)
Abstract:
We use frequency comb-based optical two-way time-frequency transfer (O-TWTFT) to measure the optical frequency ratio of state-of-the-art ytterbium and strontium optical atomic clocks separated by a 1.5 km open-air link. Our free-space measurement is compared to a simultaneous measurement acquired via a noise-cancelled fiber link. Despite non-stationary, ps-level time-of-flight variations in the fr…
▽ More
We use frequency comb-based optical two-way time-frequency transfer (O-TWTFT) to measure the optical frequency ratio of state-of-the-art ytterbium and strontium optical atomic clocks separated by a 1.5 km open-air link. Our free-space measurement is compared to a simultaneous measurement acquired via a noise-cancelled fiber link. Despite non-stationary, ps-level time-of-flight variations in the free-space link, ratio measurements obtained from the two links, averaged over 30.5 hours across six days, agree to $6\times10^{-19}$, showing that O-TWTFT can support free-space atomic clock comparisons below the $10^{-18}$ level.
△ Less
Submitted 11 September, 2020; v1 submitted 1 June, 2020;
originally announced June 2020.
-
Frequency Ratio Measurements with 18-digit Accuracy Using a Network of Optical Clocks
Authors:
Boulder Atomic Clock Optical Network,
Collaboration,
:,
Kyle Beloy,
Martha I. Bodine,
Tobias Bothwell,
Samuel M. Brewer,
Sarah L. Bromley,
Jwo-Sy Chen,
Jean-Daniel Deschênes,
Scott A. Diddams,
Robert J. Fasano,
Tara M. Fortier,
Youssef S. Hassan,
David B. Hume,
Dhruv Kedar,
Colin J. Kennedy,
Isaac Khader,
Amanda Koepke,
David R. Leibrandt,
Holly Leopardi,
Andrew D. Ludlow,
William F. McGrew,
William R. Milner,
Nathan R. Newbury
, et al. (13 additional authors not shown)
Abstract:
Atomic clocks occupy a unique position in measurement science, exhibiting higher accuracy than any other measurement standard and underpinning six out of seven base units in the SI system. By exploiting higher resonance frequencies, optical atomic clocks now achieve greater stability and lower frequency uncertainty than existing primary standards. Here, we report frequency ratios of the $^{27}$Al…
▽ More
Atomic clocks occupy a unique position in measurement science, exhibiting higher accuracy than any other measurement standard and underpinning six out of seven base units in the SI system. By exploiting higher resonance frequencies, optical atomic clocks now achieve greater stability and lower frequency uncertainty than existing primary standards. Here, we report frequency ratios of the $^{27}$Al$^+$, $^{171}$Yb and $^{87}$Sr optical clocks in Boulder, Colorado, measured across an optical network spanned by both fiber and free-space links. These ratios have been evaluated with measurement uncertainties between $6\times10^{-18}$ and $8\times10^{-18}$, making them the most accurate reported measurements of frequency ratios to date. This represents a critical step towards redefinition of the SI second and future applications such as relativistic geodesy and tests of fundamental physics.
△ Less
Submitted 29 May, 2020;
originally announced May 2020.
-
SAGE: A Proposal for a Space Atomic Gravity Explorer
Authors:
G. M. Tino,
A. Bassi,
G. Bianco,
K. Bongs,
P. Bouyer,
L. Cacciapuoti,
S. Capozziello,
X. Chen,
M. L. Chiofalo,
A. Derevianko,
W. Ertmer,
N. Gaaloul,
P. Gill,
P. W. Graham,
J. M. Hogan,
L. Iess,
M. A. Kasevich,
H. Katori,
C. Klempt,
X. Lu,
L. -S. Ma,
H. Müller,
N. R. Newbury,
C. Oates,
A. Peters
, et al. (22 additional authors not shown)
Abstract:
The proposed mission "Space Atomic Gravity Explorer" (SAGE) has the scientific objective to investigate gravitational waves, dark matter, and other fundamental aspects of gravity as well as the connection between gravitational physics and quantum physics using new quantum sensors, namely, optical atomic clocks and atom interferometers based on ultracold strontium atoms.
The proposed mission "Space Atomic Gravity Explorer" (SAGE) has the scientific objective to investigate gravitational waves, dark matter, and other fundamental aspects of gravity as well as the connection between gravitational physics and quantum physics using new quantum sensors, namely, optical atomic clocks and atom interferometers based on ultracold strontium atoms.
△ Less
Submitted 18 November, 2019; v1 submitted 8 July, 2019;
originally announced July 2019.
-
Multi-functional integrated photonics in the mid-infrared with suspended AlGaAs on silicon
Authors:
Jeff Chiles,
Nima Nader,
Eric J. Stanton,
Daniel Herman,
Galan Moody,
Jiangang Zhu,
J. Connor Skehan,
Biswarup Guha,
Abijith Kowligy,
Juliet T. Gopinath,
Kartik Srinivasan,
Scott A. Diddams,
Ian Coddington,
Nathan R. Newbury,
Jeffrey M. Shainline,
Sae Woo Nam,
Richard P. Mirin
Abstract:
The microscale integration of mid- and longwave-infrared photonics could enable the development of fieldable, robust chemical sensors, as well as highly efficient infrared frequency converters. However, such technology would be defined by the choice of material platform, which immediately determines the strength and types of optical nonlinearities available, the optical transparency window, modal…
▽ More
The microscale integration of mid- and longwave-infrared photonics could enable the development of fieldable, robust chemical sensors, as well as highly efficient infrared frequency converters. However, such technology would be defined by the choice of material platform, which immediately determines the strength and types of optical nonlinearities available, the optical transparency window, modal confinement, and physical robustness. In this work, we demonstrate a new platform, suspended AlGaAs waveguides integrated on silicon, providing excellent performance in all of these metrics. We demonstrate low propagation losses within a span of nearly two octaves (1.26 to 4.6 $μ$m) with exemplary performance of 0.45 dB/cm at $λ= 2.4$ $μ$m. We exploit the high nonlinearity of this platform to demonstrate 1560 nm-pumped second-harmonic generation and octave-spanning supercontinuum reaching out to 2.3 $μ$m with 3.4 pJ pump pulse energy. With mid-IR pumping, we generate supercontinuum spanning from 2.3 to 6.5 $μ$m. Finally, we demonstrate the versatility of the platform with mid-infrared passive devices such as low-loss 10 $μ$m-radius bends, compact power splitters with 96 $\pm$ 1% efficiency and edge couplers with 3.0 $\pm$ 0.1 dB loss. This platform has strong potential for multi-functional integrated photonic systems in the mid-IR.
△ Less
Submitted 3 May, 2019;
originally announced May 2019.
-
Measurement of the impact of turbulence anisoplanatism on precision free-space optical time transfer
Authors:
W. C. Swann,
M. I. Bodine,
I. Khader,
J. -D. Deschenes,
E. Baumann,
L. C. Sinclair,
N. R. Newbury
Abstract:
Future free-space optical clock networks will require optical links for time and frequency transfer. In many potential realizations of these networks, these links will extend over long distances and will span moving platforms, e.g. ground-to-air or ground-to-satellite. In these cases, the transverse platform motion coupled with spatial variations in atmospheric optical turbulence will lead to a br…
▽ More
Future free-space optical clock networks will require optical links for time and frequency transfer. In many potential realizations of these networks, these links will extend over long distances and will span moving platforms, e.g. ground-to-air or ground-to-satellite. In these cases, the transverse platform motion coupled with spatial variations in atmospheric optical turbulence will lead to a breakdown in the time-of-flight reciprocity upon which optical two-way time-frequency transfer is based. Here, we report experimental measurements of this effect by use of comb-based optical two-way time-frequency transfer over two spatially separated optical links. We find only a modest degradation in the time synchronization and frequency syntonization between two sites, in good agreement with theory. Based on this agreement, we can extrapolate this 2-km result to longer distances, finding only a few-femtosecond timing noise increase due to turbulence for a link from ground to a mid-earth orbit satellite.
△ Less
Submitted 12 October, 2018;
originally announced November 2018.
-
Dual-comb spectroscopy with tailored spectral broadening in Si$_3$N$_4$ nanophotonics
Authors:
Esther Baumann,
Eli V. Hoenig,
Edgar F. Perez,
Gabriel M. Colacion,
Fabrizio R. Giorgetta,
Kevin C. Cossel,
Gabriel Ycas,
David R. Carlson,
Daniel D. Hickstein,
Kartik Srinivasan,
Scott B. Papp,
Nathan R. Newbury,
Ian Coddington
Abstract:
Si$_3$N$_4$ waveguides, pumped at 1550 nm, can provide spectrally smooth, broadband light for gas spectroscopy in the important 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m atmospheric water window, which is only partially accessible with silica-fiber based systems. By combining Er+:fiber frequency combs and supercontinuum generation in tailored Si$_3$N$_4$ waveguides, high signal-to-noise dual-comb spect…
▽ More
Si$_3$N$_4$ waveguides, pumped at 1550 nm, can provide spectrally smooth, broadband light for gas spectroscopy in the important 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m atmospheric water window, which is only partially accessible with silica-fiber based systems. By combining Er+:fiber frequency combs and supercontinuum generation in tailored Si$_3$N$_4$ waveguides, high signal-to-noise dual-comb spectroscopy (DCS) spanning 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m is demonstrated. Acquired broadband dual-comb spectra of CO and CO$_2$ agree well with database line shape models and have a spectral-signal-to-noise as high as 48$/\sqrt{\mathrm{s}}$, showing that the high coherence between the two combs is retained in the Si$_3$N$_4$ supercontinuum generation. The DCS figure of merit is 6$\times 10^6/\sqrt{\mathrm{s}}$, equivalent to that of all-fiber DCS systems in the 1.6 ${\mathrmμ}$m band. Based on these results, future DCS can combine fiber comb technology with Si$_3$N$_4$ waveguides to access new spectral windows in a robust non-laboratory platform.
△ Less
Submitted 14 November, 2018;
originally announced November 2018.
-
Femtosecond Synchronization of Optical Clocks Off of a Flying Quadcopter
Authors:
Hugo Bergeron,
Laura C. Sinclair,
William C. Swann,
Isaac Khader,
Kevin C. Cossel,
Michael Cermak,
Jean-Daniel Deschênes,
Nathan R. Newbury
Abstract:
Future optical clock networks will require free-space optical time-frequency transfer between flying clocks. However, simple one-way or standard two-way time transfer between flying clocks will completely break down because of the time-of-flight variations and Doppler shifts associated with the strongly time-varying optical link distances. Here, we demonstrate an advanced, comb-based optical two-w…
▽ More
Future optical clock networks will require free-space optical time-frequency transfer between flying clocks. However, simple one-way or standard two-way time transfer between flying clocks will completely break down because of the time-of-flight variations and Doppler shifts associated with the strongly time-varying optical link distances. Here, we demonstrate an advanced, comb-based optical two-way time-frequency transfer that can successfully synchronize the optical timescales at two sites connected via a time-varying turbulent air path. The link between the two sites is established using either a quadcopter-mounted retroreflector or a swept delay line at speeds up to 24 m/s. Despite 50-ps breakdown in time-of-flight reciprocity, the sites' timescales are synchronized to < 1 fs in time deviation. The corresponding sites' frequencies agree to $\sim$ $10^{-18}$ despite $10^{-7}$ Doppler shifts. This work demonstrates comb-based O-TWTFT can enable free-space optical networks between airborne or satellite-borne optical clocks for precision navigation, timing and probes of fundamental science.
△ Less
Submitted 20 December, 2018; v1 submitted 22 August, 2018;
originally announced August 2018.
-
Femtosecond Optical Two-Way Time-Frequency Transfer in the Presence of Motion
Authors:
Laura C. Sinclair,
Hugo Bergeron,
William C. Swann,
Isaac Khader,
Kevin C. Cossel,
Michael Cermak,
Nathan R. Newbury,
Jean-Daniel Deschênes
Abstract:
Platform motion poses significant challenges to high-precision optical time and frequency transfer. We give a detailed description of these challenges and their solutions in comb-based optical two-way time and frequency transfer (O-TWTFT). Specifically, we discuss the breakdown in reciprocity due to relativity and due to asynchronous sampling, the impact of optical and electrical dispersion, and v…
▽ More
Platform motion poses significant challenges to high-precision optical time and frequency transfer. We give a detailed description of these challenges and their solutions in comb-based optical two-way time and frequency transfer (O-TWTFT). Specifically, we discuss the breakdown in reciprocity due to relativity and due to asynchronous sampling, the impact of optical and electrical dispersion, and velocity-dependent transceiver calibration. We present a detailed derivation of the equations governing comb-based O-TWTFT in the presence of motion. We describe the implementation of real-time signal processing algorithms based on these equations and demonstrate active synchronization of two sites over turbulent air paths to below a femtosecond time deviation despite effective velocities of +/-25 m/s, which is the maximum achievable with our physical setup. With the implementation of the time transfer equation derived here, we find no velocity-dependent bias between the synchronized clocks to within at two-sigma statistical uncertainty of 330 attoseconds.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
Time Synchronization over a Free-Space Optical Communication Channel
Authors:
Isaac Khader,
Hugo Bergeron,
Laura C. Sinclair,
William C. Swann,
Nathan R. Newbury,
Jean-Daniel Deschênes
Abstract:
Free space optical (FSO) communication channels are typically used to transmit high-speed data between sites over the air. Here we repurpose an FSO digital communication system and use it directly for two-way time transfer. We demonstrate real-time synchronization between two sites over a turbulent air path of 4 km using binary phase modulated CW laser light. Under synchronization, the two sites e…
▽ More
Free space optical (FSO) communication channels are typically used to transmit high-speed data between sites over the air. Here we repurpose an FSO digital communication system and use it directly for two-way time transfer. We demonstrate real-time synchronization between two sites over a turbulent air path of 4 km using binary phase modulated CW laser light. Under synchronization, the two sites exhibit a fractional frequency deviation below $10^{-15}$ and a time deviation below 1 picosecond at averaging times of seconds to hours. Over an 8-hour period the peak to peak wander is 16 ps.
△ Less
Submitted 20 August, 2018;
originally announced August 2018.
-
Fully self-referenced frequency comb consuming 5 Watts of electrical power
Authors:
Paritosh Manurkar,
Edgar F. Perez,
Daniel D. Hickstein,
David R. Carlson,
Jeff Chiles,
Daron A. Westly,
Esther Baumann,
Scott A. Diddams,
Nathan R. Newbury,
Kartik Srinivasan,
Scott B. Papp,
Ian Coddington
Abstract:
We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon nitride waveguide, which requires much lower pulse energies (~200 pJ) than with highly nonlinear fiber. These low-energy pulses are achieved with an erbium fibe…
▽ More
We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon nitride waveguide, which requires much lower pulse energies (~200 pJ) than with highly nonlinear fiber. These low-energy pulses are achieved with an erbium fiber oscillator/amplifier pumped by two 250-mW passively-cooled pump diodes that consume less than 5 W of electrical power. The temperature tuning of the oscillator, necessary to stabilize the repetition rate in the presence of environmental temperature changes, is achieved by resistive heating of a section of gold-palladium-coated fiber within the laser cavity. By heating only the small thermal mass of the fiber, the repetition rate is tuned over 4.2 kHz (corresponding to an effective temperature change of 4.2 °C) with a fast time constant of 0.5 s, at a low power consumption of 0.077 W/°C, compared to 2.5 W/°C in the conventional 200-MHz comb design.
△ Less
Submitted 18 September, 2018; v1 submitted 7 February, 2018;
originally announced February 2018.
-
Continuous regional trace gas source attribution using a field-deployed dual frequency comb spectrometer
Authors:
Sean Coburn,
Caroline B. Alden,
Robert Wright,
Kevin Cossel,
Esther Baumann,
Gar-Wing Truong,
Fabrizio Giorgetta,
Colm Sweeney,
Nathan R. Newbury,
Kuldeep Prasad,
Ian Coddington,
Gregory B. Rieker
Abstract:
Identification and quantification of trace gas sources is a major challenge for understanding and regulating air quality and greenhouse gas emissions. Current approaches either provide continuous but localized monitoring, or quasi-instantaneous 'snapshot-in-time' regional monitoring. There is a need for emissions detection that provides both continuous and regional coverage, because sources and si…
▽ More
Identification and quantification of trace gas sources is a major challenge for understanding and regulating air quality and greenhouse gas emissions. Current approaches either provide continuous but localized monitoring, or quasi-instantaneous 'snapshot-in-time' regional monitoring. There is a need for emissions detection that provides both continuous and regional coverage, because sources and sinks can be episodic and spatially variable. We field deploy a dual frequency comb laser spectrometer for the first time, enabling an observing system that provides continuous detection of trace gas sources over multiple-square-kilometer regions. Field tests simulating methane emissions from oil and gas production demonstrate detection and quantification of a 1.6 g min^-1 source (approximate emissions from a small pneumatic valve) from a distance of 1 km, and the ability to discern two leaks among a field of many potential sources. The technology achieves the goal of detecting, quantifying, and attributing emissions sources continuously through time, over large areas, and at emissions rates ~1000x lower than current regional approaches. It therefore provides a useful tool for monitoring and mitigating undesirable sources and closes a major information gap in the atmospheric sciences.
△ Less
Submitted 21 November, 2017;
originally announced November 2017.
-
Comparing optical oscillators across the air to milliradians in phase and $10^{-17}$ in frequency
Authors:
Laura C. Sinclair,
Hugo Bergeron,
William C. Swann,
Esther Baumann,
Jean-Daniel Deschênes,
Nathan R. Newbury
Abstract:
We demonstrate carrier-phase optical two-way time-frequency transfer (carrier-phase OTWTFT) through the two-way exchange of frequency comb pulses. Carrier-phase OTWTFT achieves frequency comparisons with a residual instability of 1.2x10$^{-17}$ at 1 second across a turbulent 4-km free space link, surpassing previous OTWTFT by 10-20x and enabling future high-precision optical clock networks. Furthe…
▽ More
We demonstrate carrier-phase optical two-way time-frequency transfer (carrier-phase OTWTFT) through the two-way exchange of frequency comb pulses. Carrier-phase OTWTFT achieves frequency comparisons with a residual instability of 1.2x10$^{-17}$ at 1 second across a turbulent 4-km free space link, surpassing previous OTWTFT by 10-20x and enabling future high-precision optical clock networks. Furthermore, by exploiting the carrier-phase, this approach is able to continuously track changes in the relative optical phase of distant optical oscillators to 9 mrad (7 attoseconds) at 1-sec averaging, effectively extending optical phase coherence over a broad spatial network for applications such as correlated spectroscopy between distant atomic clocks.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
High Coherence Mid-Infrared Dual Comb Spectroscopy Spanning 2.6 to 5.2 microns
Authors:
Gabriel Ycas,
Fabrizio R. Giorgetta,
Esther Baumann,
Ian Coddington,
Daniel Herman,
Scott A. Diddams,
Nathan R. Newbury
Abstract:
Mid-infrared dual-comb spectroscopy has the potential to supplant conventional high-resolution Fourier transform spectroscopy in applications that require high resolution, accuracy, signal-to-noise ratio, and speed. Until now, dual-comb spectroscopy in the mid-infrared has been limited to narrow optical bandwidths or to low signal-to-noise ratios. Using a combination of digital signal processing a…
▽ More
Mid-infrared dual-comb spectroscopy has the potential to supplant conventional high-resolution Fourier transform spectroscopy in applications that require high resolution, accuracy, signal-to-noise ratio, and speed. Until now, dual-comb spectroscopy in the mid-infrared has been limited to narrow optical bandwidths or to low signal-to-noise ratios. Using a combination of digital signal processing and broadband frequency conversion in waveguides, we demonstrate a mid-infrared dual-comb spectrometer that can measure comb-tooth resolved spectra across an octave of bandwidth in the mid-infrared from 2.6-5.2 $μ$m with sub-MHz frequency precision and accuracy and with a spectral signal-to-noise ratio as high as 6500. As a demonstration, we measure the highly structured, broadband cross-section of propane (C3H8) in the 2860-3020 cm-1 region, the complex phase/amplitude spectrum of carbonyl sulfide (COS) in the 2000 to 2100 cm-1 region, and the complex spectra of methane, acetylene, and ethane in the 2860-3400 cm-1 region.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
An Integrated-Photonics Optical-Frequency Synthesizer
Authors:
Daryl T. Spencer,
Tara Drake,
Travis C. Briles,
Jordan Stone,
Laura C. Sinclair,
Connor Fredrick,
Qing Li,
Daron Westly,
B. Robert Ilic,
Aaron Bluestone,
Nicolas Volet,
Tin Komljenovic,
Lin Chang,
Seung Hoon Lee,
Dong Yoon Oh,
Myoung-Gyun Suh,
Ki Youl Yang,
Martin H. P. Pfeiffer,
Tobias J. Kippenberg,
Erik Norberg,
Luke Theogarajan,
Kerry Vahala,
Nathan R. Newbury,
Kartik Srinivasan,
John E. Bowers
, et al. (2 additional authors not shown)
Abstract:
Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated…
▽ More
Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated devices to impact applications cutting across disciplines of basic science and technology. Here we show how to synthesize the absolute frequency of a lightwave signal, using integrated photonics to implement lasers, system interconnects, and nonlinear frequency comb generation. The laser frequency output of our synthesizer is programmed by a microwave clock across 4 THz near 1550 nm with 1 Hz resolution and traceability to the SI second. This is accomplished with a heterogeneously integrated III/V-Si tunable laser, which is guided by dual dissipative-Kerr-soliton frequency combs fabricated on silicon chips. Through out-of-loop measurements of the phase-coherent, microwave-to-optical link, we verify that the fractional-frequency instability of the integrated photonics synthesizer matches the $7.0*10^{-13}$ reference-clock instability for a 1 second acquisition, and constrain any synthesis error to $7.7*10^{-15}$ while stepping the synthesizer across the telecommunication C band. Any application of an optical frequency source would be enabled by the precision optical synthesis presented here. Building on the ubiquitous capability in the microwave domain, our results demonstrate a first path to synthesis with integrated photonics, leveraging low-cost, low-power, and compact features that will be critical for its widespread use.
△ Less
Submitted 15 August, 2017;
originally announced August 2017.
-
Self-referenced frequency combs using high-efficiency silicon-nitride waveguides
Authors:
David R. Carlson,
Daniel D. Hickstein,
Alex Lind,
Stefan Droste,
Daron Westly,
Nima Nader,
Ian Coddington,
Nathan R. Newbury,
Kartik Srinivasan,
Scott A. Diddams,
Scott B. Papp
Abstract:
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octave…
▽ More
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octaves of spectral broadening with incident energies of only 110 pJ. Following supercontinuum generation, self-referencing is accomplished by mixing 780-nm dispersive-wave light with the frequency-doubled output of the fiber laser. In addition, at higher optical powers, we demonstrate f-to-3f self-referencing directly from the waveguide output by the interference of simultaneous supercontinuum and third harmonic generation, without the use of an external doubling crystal or interferometer. These hybrid comb systems combine the performance of fiber-laser frequency combs with the high nonlinearity and compactness of photonic waveguides, and should lead to low-cost, fully stabilized frequency combs for portable and space-borne applications.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Ultrabroadband supercontinuum generation and frequency-comb stabilization using on-chip waveguides with both cubic and quadratic nonlinearities
Authors:
Daniel D. Hickstein,
Hojoong Jung,
David R. Carlson,
Alex Lind,
Ian Coddington,
Kartik Srinivasan,
Gabriel G. Ycas,
Daniel C. Cole,
Abijith Kowligy,
Connor Fredrick,
Stefan Droste,
Erin S. Lamb,
Nathan R. Newbury,
Hong X. Tang,
Scott A. Diddams,
Scott B. Papp
Abstract:
Using aluminum-nitride photonic-chip waveguides, we generate optical-frequency-comb supercontinuum spanning from 500 nm to 4000 nm with a 0.8 nJ seed pulse, and show that the spectrum can be tailored by changing the waveguide geometry. Since aluminum nitride exhibits both quadratic and cubic nonlinearities, the spectra feature simultaneous contributions from numerous nonlinear mechanisms: supercon…
▽ More
Using aluminum-nitride photonic-chip waveguides, we generate optical-frequency-comb supercontinuum spanning from 500 nm to 4000 nm with a 0.8 nJ seed pulse, and show that the spectrum can be tailored by changing the waveguide geometry. Since aluminum nitride exhibits both quadratic and cubic nonlinearities, the spectra feature simultaneous contributions from numerous nonlinear mechanisms: supercontinuum generation, difference-frequency generation, second-harmonic generation, and third-harmonic generation. As one application of integrating multiple nonlinear processes, we measure and stabilize the carrier-envelope-offset frequency of a laser comb by direct photodetection of the output light. Additionally, we generate ~0.3 mW in the 3000 nm to 4000 nm region, which is potentially useful for molecular spectroscopy. The combination of broadband light generation from the visible through the mid-infrared, combined with simplified self-referencing, provides a path towards robust comb systems for spectroscopy and metrology in the field.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Accurate frequency referencing for fieldable dual-comb spectroscopy
Authors:
Gar-Wing Truong,
Eleanor M. Waxman,
Kevin C. Cossel,
Esther Baumann,
Andrew Klose,
Fabrizio R. Giorgetta,
William C. Swann,
Nathan R. Newbury,
Ian Coddington
Abstract:
A fieldable dual-comb spectrometer is described based on a "bootstrapped" frequency referencing scheme in which short-term optical phase coherence between combs is attained by referencing each to a free-running diode laser, whilst high frequency resolution and long-term accuracy is derived from a stable quartz oscillator. This fieldable dual-comb spectrometer was used to measure spectra with full…
▽ More
A fieldable dual-comb spectrometer is described based on a "bootstrapped" frequency referencing scheme in which short-term optical phase coherence between combs is attained by referencing each to a free-running diode laser, whilst high frequency resolution and long-term accuracy is derived from a stable quartz oscillator. This fieldable dual-comb spectrometer was used to measure spectra with full comb-tooth resolution spanning from 140 THz (2.14 um, 4670 cm^-1) to 184 THz (1.63 um, 6140 cm^-1) in the near infrared with a frequency sampling of 200 MHz (0.0067 cm^-1), ~ 120 kHz frequency resolution, and ~ 1 MHz frequency accuracy. High resolution spectra of water and carbon dioxide transitions at 1.77 um, 1.96 um and 2.06 um show that the molecular transmission acquired with this fieldable system did not deviate from those measured with a laboratory-based system (referenced to a maser and cavity-stabilized laser) to within 5.6x10^-4. Additionally, the fieldable system optimized for carbon dioxide quantification at 1.60 um, demonstrated a sensitivity of 2.8 ppm-km at 1 s integration time, improving to 0.10 ppm-km at 13 minutes of integration time.
△ Less
Submitted 30 November, 2016;
originally announced December 2016.
-
A versatile, inexpensive integrated photonics platform
Authors:
Jeffrey M. Shainline,
Sonia M. Buckley,
Nima Nader,
Cale M. Gentry,
Kevin C. Cossel,
Miloš Popović,
Nathan R. Newbury,
Sae Woo Nam,
Richard P. Mirin
Abstract:
We present an approach to fabrication and packaging of integrated photonic devices that utilizes waveguide and detector layers deposited at near-ambient temperature. All lithography is performed with a 365 nm i-line stepper, facilitating low cost and high scalability. We have shown low-loss SiN waveguides, high-$Q$ ring resonators, critically coupled ring resonators, 50/50 beam splitters, Mach-Zeh…
▽ More
We present an approach to fabrication and packaging of integrated photonic devices that utilizes waveguide and detector layers deposited at near-ambient temperature. All lithography is performed with a 365 nm i-line stepper, facilitating low cost and high scalability. We have shown low-loss SiN waveguides, high-$Q$ ring resonators, critically coupled ring resonators, 50/50 beam splitters, Mach-Zehnder interferometers (MZIs) and a process-agnostic fiber packaging scheme. We have further explored the utility of this process for applications in nonlinear optics and quantum photonics. We demonstrate spectral tailoring and octave-spanning supercontinuum generation as well as the integration of superconducting nanowire single photon detectors with MZIs and channel-dropping filters. The packaging approach is suitable for operation up to 160 \degree C as well as below 1 K. The process is well suited for augmentation of existing foundry capabilities or as a stand-alone process.
△ Less
Submitted 7 November, 2016;
originally announced November 2016.
-
Synchronization of Distant Optical Clocks at the Femtosecond Level
Authors:
Jean-Daniel Deschenes,
Laura C. Sinclair,
Fabrizio R. Giorgetta,
William C. Swann,
Esther Baumann,
Hugo Bergeron,
Michael Cermak,
Ian Coddington,
Nathan R. Newbury
Abstract:
The use of optical clocks/oscillators in future ultra-precise navigation, gravitational sensing, coherent arrays, and relativity experiments will require time comparison and synchronization over terrestrial or satellite free-space links. Here we demonstrate full unambiguous synchronization of two optical timescales across a free-space link. The time deviation between synchronized timescales is bel…
▽ More
The use of optical clocks/oscillators in future ultra-precise navigation, gravitational sensing, coherent arrays, and relativity experiments will require time comparison and synchronization over terrestrial or satellite free-space links. Here we demonstrate full unambiguous synchronization of two optical timescales across a free-space link. The time deviation between synchronized timescales is below 1 fs over durations from 0.1 s to 6500 s, despite atmospheric turbulence and kilometer-scale path length variations. Over several days, the time wander is 40 fs peak-to-peak. Our approach relies on the two-way reciprocity of a single-spatial-mode optical link, valid to below 225 attoseconds across a turbulent 4-km path. This femtosecond level of time-frequency transfer should enable optical networks using state-of-the-art optical clocks/oscillators.
△ Less
Submitted 11 December, 2015; v1 submitted 25 September, 2015;
originally announced September 2015.
-
Frequency Comb-Based Remote Sensing of Greenhouse Gases over Kilometer Air Paths
Authors:
Gregory B. Rieker,
Fabrizio R. Giorgetta,
William C. Swann,
Jon Kofler,
Alex M. Zolot,
Laura C. Sinclair,
Esther Baumann,
Christopher Cromer,
Gabrielle Petron,
Colm Sweeney,
Pieter P. Tans,
Ian Coddington,
Nathan R. Newbury
Abstract:
We demonstrate coherent dual frequency-comb spectroscopy for detecting variations in greenhouse gases. High signal-to-noise spectra are acquired spanning 5990 to 6260 cm^-1 (1600 to 1670 nm) covering ~700 absorption features from CO2, CH4, H2O, HDO, and 13CO2, across a 2-km open-air path. The transmission of each frequency comb tooth is resolved, leading to spectra with <1 kHz frequency accuracy,…
▽ More
We demonstrate coherent dual frequency-comb spectroscopy for detecting variations in greenhouse gases. High signal-to-noise spectra are acquired spanning 5990 to 6260 cm^-1 (1600 to 1670 nm) covering ~700 absorption features from CO2, CH4, H2O, HDO, and 13CO2, across a 2-km open-air path. The transmission of each frequency comb tooth is resolved, leading to spectra with <1 kHz frequency accuracy, no instrument lineshape, and a 0.0033-cm^-1 point spacing. The fitted path-averaged concentrations and temperature yield dry-air mole fractions. These are compared with a point sensor under well-mixed conditions to evaluate current absorption models for real atmospheres. In heterogeneous conditions, time-resolved data demonstrate tracking of strong variations in mole fractions. A precision of <1 ppm for CO2 and <3 ppb for CH4 is achieved in 5 minutes in this initial demonstration. Future portable systems could support regional emissions monitoring and validation of the spectral databases critical to global satellite-based trace gas monitoring.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Operation of an optically coherent frequency comb outside the metrology lab
Authors:
Laura C. Sinclair,
Ian Coddington,
William C. Swann,
Greg B. Rieker,
Archita Hati,
Kana Iwakuni,
Nathan R. Newbury
Abstract:
We demonstrate a self-referenced fiber frequency comb that can operate outside the well-controlled optical laboratory. The frequency comb has residual optical linewidths of < 1 Hz, sub-radian residual optical phase noise, and residual pulse-to-pulse timing jitter of 2.4 - 5 fs, when locked to an optical reference. This fully phase-locked frequency comb has been successfully operated in a moving ve…
▽ More
We demonstrate a self-referenced fiber frequency comb that can operate outside the well-controlled optical laboratory. The frequency comb has residual optical linewidths of < 1 Hz, sub-radian residual optical phase noise, and residual pulse-to-pulse timing jitter of 2.4 - 5 fs, when locked to an optical reference. This fully phase-locked frequency comb has been successfully operated in a moving vehicle with 0.5 g peak accelerations and on a shaker table with a sustained 0.5 g rms integrated acceleration, while retaining its optical coherence and 5-fs-level timing jitter. This frequency comb should enable metrological measurements outside the laboratory with the precision and accuracy that are the hallmarks of comb-based systems. Work of the U.S. government, not subject to copyright
△ Less
Submitted 20 December, 2013;
originally announced December 2013.
-
Optical two-way time and frequency transfer over free space
Authors:
Fabrizio R. Giorgetta,
William C. Swann,
Laura C. Sinclair,
Esther Baumann,
Ian Coddington,
Nathan R. Newbury
Abstract:
The transfer of high-quality time-frequency signals between remote locations underpins a broad range of applications including precision navigation and timing, the new field of clock-based geodesy, long-baseline interferometry, coherent radar arrays, tests of general relativity and fundamental constants, and the future redefinition of the second [1-7]. However, present microwave-based time-frequen…
▽ More
The transfer of high-quality time-frequency signals between remote locations underpins a broad range of applications including precision navigation and timing, the new field of clock-based geodesy, long-baseline interferometry, coherent radar arrays, tests of general relativity and fundamental constants, and the future redefinition of the second [1-7]. However, present microwave-based time-frequency transfer [8-10] is inadequate for state-of-the-art optical clocks and oscillators [1,11-15] that have femtosecond-level timing jitter and accuracies below 1E-17; as such, commensurate optically-based transfer methods are needed. While fiber-based optical links have proven suitable [16,17], they are limited to comparisons between fixed sites connected by a specialized bidirectional fiber link. With the exception of tests of the fundamental constants, most applications instead require more flexible connections between remote and possibly portable optical clocks and oscillators. Here we demonstrate optical time-frequency transfer over free-space via a two-way exchange between coherent frequency combs, each phase-locked to the local optical clock or oscillator. We achieve femtosecond-scale timing deviation, a residual instability below 1E-18 at 1000 s and systematic offsets below 4E-19, despite frequent signal fading due to atmospheric turbulence or obstructions across the 2-km link. This free-space transfer would already enable terrestrial links to support clock-based geodesy. If combined with satellite-based free-space optical communications, it provides a path toward global-scale geodesy, high-accuracy time-frequency distribution, satellite-based relativity experiments, and "optical GPS" for precision navigation.
△ Less
Submitted 20 November, 2012;
originally announced November 2012.
-
Spectroscopy of the Methane ν3 Band with an Accurate Mid-Infrared Coherent Dual- Comb Spectrometer
Authors:
E. Baumann,
F. R. Giorgetta,
W. C. Swann,
A. M. Zolot,
I. Coddington,
N. R. Newbury
Abstract:
We demonstrate a high-accuracy dual-comb spectrometer centered at 3.4 μm. The amplitude and phase spectra of the P, Q, and partial R-branch of the methane ν3 band are measured at 25 MHz to 100 MHz point spacing with ~kHz resolution and a signal-to-noise ratio of up to 3500. A fit of the absorbance and phase spectra yield the center frequency of 132 rovibrational lines. The systematic uncertainty i…
▽ More
We demonstrate a high-accuracy dual-comb spectrometer centered at 3.4 μm. The amplitude and phase spectra of the P, Q, and partial R-branch of the methane ν3 band are measured at 25 MHz to 100 MHz point spacing with ~kHz resolution and a signal-to-noise ratio of up to 3500. A fit of the absorbance and phase spectra yield the center frequency of 132 rovibrational lines. The systematic uncertainty is estimated to be 300 kHz, which is 10-3 of the Doppler width and a tenfold improvement over Fourier transform spectroscopy. These data are the first high- accuracy molecular spectra obtained with a direct comb spectrometer.
△ Less
Submitted 6 October, 2011;
originally announced October 2011.
-
Coherent Dual Comb Spectroscopy at High Signal to Noise
Authors:
I. Coddington,
W. C. Swann,
N. R. Newbury
Abstract:
Two frequency combs can be used to measure the full complex response of a sample in a configuration which can be alternatively viewed as the equivalent of a dispersive Fourier transform spectrometer, infrared time domain spectrometer, or a multiheterodyne laser spectrometer. This dual comb spectrometer retains the frequency accuracy and resolution inherent to the comb sources. We discuss, in detai…
▽ More
Two frequency combs can be used to measure the full complex response of a sample in a configuration which can be alternatively viewed as the equivalent of a dispersive Fourier transform spectrometer, infrared time domain spectrometer, or a multiheterodyne laser spectrometer. This dual comb spectrometer retains the frequency accuracy and resolution inherent to the comb sources. We discuss, in detail, the specific design of our coherent dual-comb spectrometer and demonstrate the potential of this technique by measuring the first overtone vibration of hydrogen cyanide, centered at 194 THz (1545 nm). We measure the fully normalized, complex response of the gas over a 9 THz bandwidth at 220 MHz frequency resolution yielding 41,000 resolution elements. The average spectral signal-to-noise ratio (SNR) is 2,500 for both the fractional absorption and the phase, with a peak SNR of 4,000 corresponding to a fractional absorption sensitivity of 0.025% and phase sensitivity of 250 microradians. As the spectral coverage of combs expands, this dual-comb spectroscopy could provide high frequency accuracy and resolution measurements of a complex sample response across a range of spectral regions.
△ Less
Submitted 10 September, 2010; v1 submitted 21 January, 2010;
originally announced January 2010.
-
Coherent, multi-heterodyne spectroscopy using stabilized optical frequency combs
Authors:
Ian Coddington,
William C. Swann,
Nathan R. Newbury
Abstract:
The broadband, coherent nature of narrow-linewidth fiber frequency combs is exploited to measure the full complex spectrum of a molecular gas through multi-heterodyne spectroscopy. We measure the absorption and phase shift experienced by each of 155,000 individual frequency comb lines, spaced by 100 MHz and spanning from 1495 nm to 1620 nm, after passing through a hydrogen cyanide gas. The measu…
▽ More
The broadband, coherent nature of narrow-linewidth fiber frequency combs is exploited to measure the full complex spectrum of a molecular gas through multi-heterodyne spectroscopy. We measure the absorption and phase shift experienced by each of 155,000 individual frequency comb lines, spaced by 100 MHz and spanning from 1495 nm to 1620 nm, after passing through a hydrogen cyanide gas. The measured phase spectrum agrees with Kramers-Kronig transformation of the absorption spectrum. This technique can provide a full complex spectrum rapidly, over wide bandwidths, and with hertz-level accuracy.
△ Less
Submitted 17 October, 2007;
originally announced October 2007.
-
Fundamental noise limitations to supercontinuum generation in microstructure fiber
Authors:
K. L. Corwin,
N. R. Newbury,
J. M. Dudley,
S. Coen,
S. A. Diddams,
K. Weber,
R. S. Windeler
Abstract:
Broadband noise on supercontinuum spectra generated in microstructure fiber is shown to lead to amplitude fluctuations as large as 50 % for certain input laser pulse parameters. We study this noise using both experimental measurements and numerical simulations with a generalized stochastic nonlinear Schroedinger equation, finding good quantitative agreement over a range of input pulse energies a…
▽ More
Broadband noise on supercontinuum spectra generated in microstructure fiber is shown to lead to amplitude fluctuations as large as 50 % for certain input laser pulse parameters. We study this noise using both experimental measurements and numerical simulations with a generalized stochastic nonlinear Schroedinger equation, finding good quantitative agreement over a range of input pulse energies and chirp values. This noise is shown to arise from nonlinear amplification of two quantum noise inputs: the input pulse shot noise and the spontaneous Raman scattering down the fiber.
△ Less
Submitted 6 December, 2002;
originally announced December 2002.