-
Performance of PIP-II High-beta 650 Cryomodule After Transatlantic Shipping
Authors:
J. Ozelis,
M. Barba,
J. Bernardini,
C. Contreras-Martinez,
D. Crawford,
J. Dong,
V. Grzelak,
P. Hanlet,
J. Holzbauer,
Y. Jia,
S. Kazakov,
T. Khabiboulline,
J. Makara,
N. Patel,
V. Patel,
L. Pei,
D. Peterson,
Y. Pischalnikov,
D. Porwisiak,
S. Ranpariya,
J. Steimel,
N. Solyak,
J. Subedi,
A. Sukhanov,
P. Varghese
, et al. (5 additional authors not shown)
Abstract:
After shipment to the Daresbury Lab and return to Fermilab, the prototype HB650 cryomodule underwent another phase of 2K RF testing to ascertain any performance issues that may have arisen from the transport of the cryomodule. While measurements taken at room temperature after the conclusion of shipment indicated that there were no negative impacts on cavity alignment, beamline vacuum, or cavity f…
▽ More
After shipment to the Daresbury Lab and return to Fermilab, the prototype HB650 cryomodule underwent another phase of 2K RF testing to ascertain any performance issues that may have arisen from the transport of the cryomodule. While measurements taken at room temperature after the conclusion of shipment indicated that there were no negative impacts on cavity alignment, beamline vacuum, or cavity frequency, testing at 2K was required to validate other aspects such as tuner operation, cavity coupling, cryogenic system integrity, and cavity performance. Results of this latest round of limited 2K testing will be presented.
△ Less
Submitted 3 September, 2024;
originally announced September 2024.
-
Hallucination Index: An Image Quality Metric for Generative Reconstruction Models
Authors:
Matthew Tivnan,
Siyeop Yoon,
Zhennong Chen,
Xiang Li,
Dufan Wu,
Quanzheng Li
Abstract:
Generative image reconstruction algorithms such as measurement conditioned diffusion models are increasingly popular in the field of medical imaging. These powerful models can transform low signal-to-noise ratio (SNR) inputs into outputs with the appearance of high SNR. However, the outputs can have a new type of error called hallucinations. In medical imaging, these hallucinations may not be obvi…
▽ More
Generative image reconstruction algorithms such as measurement conditioned diffusion models are increasingly popular in the field of medical imaging. These powerful models can transform low signal-to-noise ratio (SNR) inputs into outputs with the appearance of high SNR. However, the outputs can have a new type of error called hallucinations. In medical imaging, these hallucinations may not be obvious to a Radiologist but could cause diagnostic errors. Generally, hallucination refers to error in estimation of object structure caused by a machine learning model, but there is no widely accepted method to evaluate hallucination magnitude. In this work, we propose a new image quality metric called the hallucination index. Our approach is to compute the Hellinger distance from the distribution of reconstructed images to a zero hallucination reference distribution. To evaluate our approach, we conducted a numerical experiment with electron microscopy images, simulated noisy measurements, and applied diffusion based reconstructions. We sampled the measurements and the generative reconstructions repeatedly to compute the sample mean and covariance. For the zero hallucination reference, we used the forward diffusion process applied to ground truth. Our results show that higher measurement SNR leads to lower hallucination index for the same apparent image quality. We also evaluated the impact of early stopping in the reverse diffusion process and found that more modest denoising strengths can reduce hallucination. We believe this metric could be useful for evaluation of generative image reconstructions or as a warning label to inform radiologists about the degree of hallucinations in medical images.
△ Less
Submitted 17 July, 2024;
originally announced July 2024.
-
Development of MMC-based lithium molybdate cryogenic calorimeters for AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
H. Bae,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
S. Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev
, et al. (84 additional authors not shown)
Abstract:
The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is und…
▽ More
The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is under construction.This paper discusses the baseline design and characterization of the lithium molybdate cryogenic calorimeters to be used in the AMoRE-II detector modules. The results from prototype setups that incorporate new housing structures and two different crystal masses (316 g and 517 - 521 g), operated at 10 mK temperature, show energy resolutions (FWHM) of 7.55 - 8.82 keV at the 2.615 MeV $^{208}$Tl $γ$ line, and effective light detection of 0.79 - 0.96 keV/MeV. The simultaneous heat and light detection enables clear separation of alpha particles with a discrimination power of 12.37 - 19.50 at the energy region around $^6$Li(n, $α$)$^3$H with Q-value = 4.785 MeV. Promising detector performances were demonstrated at temperatures as high as 30 mK, which relaxes the temperature constraints for operating the large AMoRE-II array.
△ Less
Submitted 16 July, 2024;
originally announced July 2024.
-
Implementation of reflection matrix microscopy: An algorithm perspective
Authors:
Sungsam Kang,
Seokchan Yoon,
Wonshik Choi
Abstract:
Over the past decade, reflection matrix microscopy (RMM) and advanced image reconstruction algorithms have emerged to address the fundamental imaging depth limitations of optical microscopy in thick biological tissues and complex media. In this study, we introduce significant advancements in reflection matrix processing algorithms, including logical indexing, power iterations, and low-frequency bl…
▽ More
Over the past decade, reflection matrix microscopy (RMM) and advanced image reconstruction algorithms have emerged to address the fundamental imaging depth limitations of optical microscopy in thick biological tissues and complex media. In this study, we introduce significant advancements in reflection matrix processing algorithms, including logical indexing, power iterations, and low-frequency blocking. These enhance the processing speed of aperture synthesis, 3D image reconstruction, and aberration correction by orders of magnitude. Detailed algorithm implementations, along with experimental data, are provided to facilitate the widespread adoption of RMM in various deep-tissue imaging applications.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Multiphoton super-resolution imaging via virtual structured illumination
Authors:
Sumin Lim,
Sungsam Kang,
Jin-Hee Hong,
Youngho Jin,
Kalpak Gupta,
Moonseok Kim,
Suhyun Kim,
Wonshik Choi,
Seokchan Yoon
Abstract:
Fluorescence imaging in thick biological tissues is challenging due to sample-induced aberration and scattering, which leads to severe degradation of image quality and resolution. Fluorescence imaging in reflection geometry further exacerbates this issue since the point spread function is distorted in both excitation and emission pathways. Here, we propose a novel approach termed adaptive optics v…
▽ More
Fluorescence imaging in thick biological tissues is challenging due to sample-induced aberration and scattering, which leads to severe degradation of image quality and resolution. Fluorescence imaging in reflection geometry further exacerbates this issue since the point spread function is distorted in both excitation and emission pathways. Here, we propose a novel approach termed adaptive optics virtual structured illumination microscopy (AO V-SIM) that enables super-resolution multiphoton imaging through a scattering medium in reflection geometry. Our approach exploits the incoherent reflection matrix obtained using a conventional point-scanning fluorescence microscope with an array detector. We introduce V-SIM super-resolution reconstruction algorithm based on the incoherent reflection matrix. Furthermore, we introduce a software adaptive optics correction algorithm, AO V-SIM, which recovers unattenuated and phase-corrected optical transfer function for both excitation and emission pathways. The effectiveness of our proposed method is experimentally validated through sub-diffraction-limited two-photon fluorescence imaging of various samples in the presence of strong aberration.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Quantum plasmonic sensing by Hong-Ou-Mandel interferometry
Authors:
Seungjin Yoon,
Yu Sung Choi,
Mark Tame,
Jae Woong Yoon,
Sergey V. Polyakov,
Changhyoup Lee
Abstract:
We propose a quantum plasmonic sensor using Hong-Ou-Mandel (HOM) interferometry that measures the refractive index of an analyte, embedded in a plasmonic beam splitter composed of a dual-Kretschmann configuration, which serves as a frustrated total internal reflection beamsplitter. The sensing performance of the HOM interferometry, combined with single-photon detectors, is evaluated through Fisher…
▽ More
We propose a quantum plasmonic sensor using Hong-Ou-Mandel (HOM) interferometry that measures the refractive index of an analyte, embedded in a plasmonic beam splitter composed of a dual-Kretschmann configuration, which serves as a frustrated total internal reflection beamsplitter. The sensing performance of the HOM interferometry, combined with single-photon detectors, is evaluated through Fisher information for estimation of the refractive index of the analyte. This is subsequently compared with the classical benchmark that considers the injection of a coherent state of light into the plasmonic beamsplitter. By varying the wavelength of the single photons and the refractive index of the analyte, we identify a wide range where a 50 % quantum enhancement is achieved and discuss the observed behaviors in comparison with the classical benchmark. We expect this study to provide a useful insight into the advancement of quantum-enhanced sensing technologies, with direct implications for a wide range of nanophotonic beamsplitter structures.
△ Less
Submitted 30 July, 2024; v1 submitted 16 April, 2024;
originally announced April 2024.
-
Microscopic modeling of attention-based movement behaviors
Authors:
Danrui Li,
Mathew Schwartz,
Samuel S. Sohn,
Sejong Yoon,
Vladimir Pavlovic,
Mubbasir Kapadia
Abstract:
For transportation hubs, leveraging pedestrian flows for commercial activities presents an effective strategy for funding maintenance and infrastructure improvements. However, this introduces new challenges, as consumer behaviors can disrupt pedestrian flow and efficiency. To optimize both retail potential and pedestrian efficiency, careful strategic planning in store layout and facility dimension…
▽ More
For transportation hubs, leveraging pedestrian flows for commercial activities presents an effective strategy for funding maintenance and infrastructure improvements. However, this introduces new challenges, as consumer behaviors can disrupt pedestrian flow and efficiency. To optimize both retail potential and pedestrian efficiency, careful strategic planning in store layout and facility dimensions was done by expert judgement due to the complexity in pedestrian dynamics in the retail areas of transportation hubs. This paper introduces an attention-based movement model to simulate these dynamics. By simulating retail potential of an area through the duration of visual attention it receives, and pedestrian efficiency via speed loss in pedestrian walking behaviors, the study further explores how design features can influence the retail potential and pedestrian efficiency in a bi-directional corridor inside a transportation hub. Project webpage: https://danruili.github.io/AttentionMove
△ Less
Submitted 2 May, 2024; v1 submitted 21 March, 2024;
originally announced March 2024.
-
Radon Concentration Measurement with a High-Sensitivity Radon Detector at the Yemilab
Authors:
Kyungmin Seo,
Hyunsoo Kim,
Yeongduk Kim,
Hyeyoung Lee,
Jaison Lee,
Moo Hyun Lee,
Jungho So,
Sangcheol Yoon,
Youngsoo Yoon
Abstract:
The radiation emitted from radon is a critical background in rare event search experiments conducted at the Yemi Underground Laboratory (Yemilab) in Jeongseon, Korea. A Radon Reduction System(RRS) has been developed and installed in Yemilab to reduce radon concentration in the air. The RRS primarily provides a purified air of 50 m3/h to the cleanroom used to assemble crystal detectors in the AMoRE…
▽ More
The radiation emitted from radon is a critical background in rare event search experiments conducted at the Yemi Underground Laboratory (Yemilab) in Jeongseon, Korea. A Radon Reduction System(RRS) has been developed and installed in Yemilab to reduce radon concentration in the air. The RRS primarily provides a purified air of 50 m3/h to the cleanroom used to assemble crystal detectors in the AMoRE, a neutrinoless double beta decay search experiment. RRS can reduce the radon level by a factor of 300, so a high-sensitivity radon detector was required. A highly sensitive radon detector was constructed using a 70 L chamber with a large PIN photodiode to measure radon concentration in the purified air. The radon detector shows an excellent resolution of 72 keV (FWHM) for 6.003 MeV alphas from 218Po decay and a sensitivity down to 23.8 +- 2.1 mBq/m3 with a boil-off N2 gas sample. The radon concentration level from the RRS measured by the radon detector was below 0.29 Bq/m3 with a reduction factor of about 300.
△ Less
Submitted 7 May, 2024; v1 submitted 12 March, 2024;
originally announced March 2024.
-
Pulse shape discrimination in an organic scintillation phoswich detector using machine learning techniques
Authors:
Yujin Lee,
Jinyoung Kim,
Byoung-cheol Koh,
Young Soo Yoon,
Chang Hyon Ha
Abstract:
We developed machine learning algorithms for distinguishing scintillation signals from a plastic-liquid coupled detector known as a phoswich. The challenge lies in discriminating signals from organic scintillators with similar shapes and short decay times. Using a single-readout phoswich detector, we successfully identified $γ$ radiation signals from two scintillating components. Our Boosted Decis…
▽ More
We developed machine learning algorithms for distinguishing scintillation signals from a plastic-liquid coupled detector known as a phoswich. The challenge lies in discriminating signals from organic scintillators with similar shapes and short decay times. Using a single-readout phoswich detector, we successfully identified $γ$ radiation signals from two scintillating components. Our Boosted Decision Tree algorithm demonstrated a maximum discrimination power of 3.02 $\pm$ 0.85 standard deviation in the 950 keV region, providing an efficient solution for self-shielding and enhancing radiation detection capabilities.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Measurements of low-energy nuclear recoil quenching factors for Na and I recoils in the NaI(Tl) scintillator
Authors:
S. H. Lee,
H. W. Joo,
H. J. Kim,
K. W. Kim,
S. K. Kim,
Y. D. Kim,
Y. J. Ko,
H. S. Lee,
J. Y. Lee,
H. S. Park,
Y. S. Yoon
Abstract:
Elastic scattering off nuclei in target detectors, involving interactions with dark matter and coherent elastic neutrino nuclear recoil (CE$ν$NS), results in the deposition of low energy within the nuclei, dissipating rapidly through a combination of heat and ionization. The primary energy loss mechanism for nuclear recoil is heat, leading to consistently smaller measurable scintillation signals c…
▽ More
Elastic scattering off nuclei in target detectors, involving interactions with dark matter and coherent elastic neutrino nuclear recoil (CE$ν$NS), results in the deposition of low energy within the nuclei, dissipating rapidly through a combination of heat and ionization. The primary energy loss mechanism for nuclear recoil is heat, leading to consistently smaller measurable scintillation signals compared to electron recoils of the same energy. The nuclear recoil quenching factor (QF), representing the ratio of scintillation light yield produced by nuclear recoil to that of electron recoil at the same energy, is a critical parameter for understanding dark matter and neutrino interactions with nuclei. The low energy QF of NaI(Tl) crystals, commonly employed in dark matter searches and CE$ν$NS measurements, is of substantial importance. Previous low energy QF measurements were constrained by contamination from photomultiplier tube (PMT)-induced noise, resulting in an observed light yield of approximately 15 photoelectrons per keVee (kilo-electron-volt electron-equivalent energy) and nuclear recoil energy above 5 keVnr (kilo-electron-volt nuclear recoil energy). Through enhanced crystal encapsulation, an increased light yield of around 26 photoelectrons per keVee is achieved. This improvement enables the measurement of the nuclear recoil QF for sodium nuclei at an energy of 3.8 $\pm$ 0.6 keVnr with a QF of 11.2 $\pm$ 1.7%. Furthermore, a reevaluation of previously reported QF results is conducted, incorporating enhancements in low energy events based on waveform simulation. The outcomes are generally consistent with various recent QF measurements for sodium and iodine.
△ Less
Submitted 8 July, 2024; v1 submitted 23 February, 2024;
originally announced February 2024.
-
Mass Spectra Prediction with Structural Motif-based Graph Neural Networks
Authors:
Jiwon Park,
Jeonghee Jo,
Sungroh Yoon
Abstract:
Mass spectra, which are agglomerations of ionized fragments from targeted molecules, play a crucial role across various fields for the identification of molecular structures. A prevalent analysis method involves spectral library searches,where unknown spectra are cross-referenced with a database. The effectiveness of such search-based approaches, however, is restricted by the scope of the existing…
▽ More
Mass spectra, which are agglomerations of ionized fragments from targeted molecules, play a crucial role across various fields for the identification of molecular structures. A prevalent analysis method involves spectral library searches,where unknown spectra are cross-referenced with a database. The effectiveness of such search-based approaches, however, is restricted by the scope of the existing mass spectra database, underscoring the need to expand the database via mass spectra prediction. In this research, we propose the Motif-based Mass Spectrum Prediction Network (MoMS-Net), a system that predicts mass spectra using the information derived from structural motifs and the implementation of Graph Neural Networks (GNNs). We have tested our model across diverse mass spectra and have observed its superiority over other existing models. MoMS-Net considers substructure at the graph level, which facilitates the incorporation of long-range dependencies while using less memory compared to the graph transformer model.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Neoclassical transport of tungsten ion bundles in total-f neoclassical gyrokinetic simulations of a whole-volume JET-like plasma
Authors:
J. Dominski,
C. S. Chang,
R. Hager,
S. Ku,
E. S. Yoon,
V. Parail
Abstract:
The application of a bundling technique to model the diverse charge states of tungsten impurity species in total-f gyrokinetic simulations is demonstrated. The gyrokinetic bundling method strategically groups tungsten ions of similar charge, optimizing computational efficiency. The initial radial configuration of these bundles and their respective charges are derived from a coronal approximation a…
▽ More
The application of a bundling technique to model the diverse charge states of tungsten impurity species in total-f gyrokinetic simulations is demonstrated. The gyrokinetic bundling method strategically groups tungsten ions of similar charge, optimizing computational efficiency. The initial radial configuration of these bundles and their respective charges are derived from a coronal approximation and the quasi-neutrality of the plasma. A low-density JET H-mode like plasma is simulated using the neoclassical version of XGC across the entire plasma volume, spanning from the magnetic axis to the divertor. An accumulation of tungsten is observed at the pedestal top, as a result of low-Z tungsten ions moving inward from the scrape-off-layer (SOL) into the core region and high-Z tungsten ions moving outward from the core into the pedestal. This organization of the fluxes cannot be captured by a single tungsten-ion simulation. Large up-down poloidal asymmetries of tungsten form in the pedestal and strongly influence the direction of neoclassical fluxes. The temperature screening effect and its correlation with asymmetries is analyzed.
△ Less
Submitted 25 January, 2024; v1 submitted 22 June, 2023;
originally announced June 2023.
-
Synthetic aperture phase imaging of second harmonic generation field with computational adaptive optics
Authors:
Jungho Moon,
Sungsam Kang,
Jin Hee Hong,
Seokchan Yoon,
Wonshik Choi
Abstract:
Second-harmonic generation (SHG) microscopy provides label-free imaging of biological tissues with unique contrast mechanisms, but its resolution is limited by the diffraction limit. Here, we present the first experimental demonstration of super-resolution quantitative phase imaging of the SHG field based on synthetic aperture Fourier holographic microscopy. We discuss the mathematical model of sy…
▽ More
Second-harmonic generation (SHG) microscopy provides label-free imaging of biological tissues with unique contrast mechanisms, but its resolution is limited by the diffraction limit. Here, we present the first experimental demonstration of super-resolution quantitative phase imaging of the SHG field based on synthetic aperture Fourier holographic microscopy. We discuss the mathematical model of synthetic-aperture imaging of SHG fields, as well as the computational adaptive optics technique for correcting sample-induced aberration. We demonstrate proof-of-concept experiments where SHG targets are embedded within a thick scattering medium to validate the performance of the proposed imaging technique. It is shown to be able to overcome the conventional Abbe diffraction limit even in the complex aberrations and strong multiple scattering. We also demonstrate SHG-based super-resolution deep-tissue phase imaging of ex-vivo zebrafish muscle tissue.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
Tracing multiple scattering trajectories for deep optical imaging in scattering media
Authors:
Sungsam Kang,
Yongwoo Kwon,
Hojun Lee,
Seho Kim,
Jin Hee Hong,
Seokchan Yoon,
Wonshik Choi
Abstract:
Multiple light scattering hampers imaging objects in complex scattering media. Approaches used in real practices mainly aim to filter out multiple scattering obscuring the ballistic waves that travel straight through the scattering medium. Here, we propose a method that makes the deterministic use of multiple scattering for microscopic imaging of an object embedded deep within scattering media. Th…
▽ More
Multiple light scattering hampers imaging objects in complex scattering media. Approaches used in real practices mainly aim to filter out multiple scattering obscuring the ballistic waves that travel straight through the scattering medium. Here, we propose a method that makes the deterministic use of multiple scattering for microscopic imaging of an object embedded deep within scattering media. The proposed method finds a stack of multiple complex phase plates that generate similar light trajectories as the original scattering medium. By implementing the inverse scattering using the identified phase plates, our method rectifies multiple scattering and amplifies ballistic waves by almost 600 times, which leads to a substantial increase in imaging depth. Our study marks an important milestone in solving the longstanding high-order inverse scattering problems.
△ Less
Submitted 19 February, 2023;
originally announced February 2023.
-
Highly-parallelized simulation of a pixelated LArTPC on a GPU
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1282 additional authors not shown)
Abstract:
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr…
▽ More
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype.
△ Less
Submitted 28 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Particle Physics at the European Spallation Source
Authors:
H. Abele,
A. Alekou,
A. Algora,
K. Andersen,
S. Baessler,
L. Barron-Palos,
J. Barrow,
E. Baussan,
P. Bentley,
Z. Berezhiani,
Y. Bessler,
A. K. Bhattacharyya,
A. Bianchi,
J. Bijnens,
C. Blanco,
N. Blaskovic Kraljevic,
M. Blennow,
K. Bodek,
M. Bogomilov,
C. Bohm,
B. Bolling,
E. Bouquerel,
G. Brooijmans,
L. J. Broussard,
O. Buchan
, et al. (154 additional authors not shown)
Abstract:
Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons…
▽ More
Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches).
△ Less
Submitted 30 January, 2024; v1 submitted 18 November, 2022;
originally announced November 2022.
-
Pulse shape discrimination using a convolutional neural network for organic liquid scintillator signals
Authors:
K. Y. Jung,
B. Y. Han,
E. J. Jeon,
Y. Jeong,
H. S. Jo,
J. Y. Kim,
J. G. Kim,
Y. D. Kim,
Y. J. Ko,
M. H. Lee,
J. Lee,
C. S. Moon,
Y. M. Oh,
H. K. Park,
S. H. Seo,
D. W. Seol,
K. Siyeon,
G. M. Sun,
Y. S. Yoon,
I. Yu
Abstract:
A convolutional neural network (CNN) architecture is developed to improve the pulse shape discrimination (PSD) power of the gadolinium-loaded organic liquid scintillation detector to reduce the fast neutron background in the inverse beta decay candidate events of the NEOS-II data. A power spectrum of an event is constructed using a fast Fourier transform of the time domain raw waveforms and put in…
▽ More
A convolutional neural network (CNN) architecture is developed to improve the pulse shape discrimination (PSD) power of the gadolinium-loaded organic liquid scintillation detector to reduce the fast neutron background in the inverse beta decay candidate events of the NEOS-II data. A power spectrum of an event is constructed using a fast Fourier transform of the time domain raw waveforms and put into CNN. An early data set is evaluated by CNN after it is trained using low energy $β$ and $α$ events. The signal-to-background ratio averaged over 1-10 MeV visible energy range is enhanced by more than 20% in the result of the CNN method compared to that of an existing conventional PSD method, and the improvement is even higher in the low energy region.
△ Less
Submitted 15 January, 2023; v1 submitted 14 November, 2022;
originally announced November 2022.
-
Status and performance of the AMoRE-I experiment on neutrinoless double beta decay
Authors:
H. B. Kim,
D. H. Ha,
E. J. Jeon,
J. A. Jeon,
H. S. Jo,
C. S. Kang,
W. G. Kang,
H. S. Kim,
S. C. Kim,
S. G. Kim,
S. K. Kim,
S. R. Kim,
W. T. Kim,
Y. D. Kim,
Y. H. Kim,
D. H. Kwon,
E. S. Lee,
H. J. Lee,
H. S. Lee,
J. S. Lee,
M. H. Lee,
S. W. Lee,
Y. C. Lee,
D. S. Leonard,
H. S. Lim
, et al. (10 additional authors not shown)
Abstract:
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ cryst…
▽ More
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ crystals and five Li$_2$$^{100}$MoO$_4$ crystals for a total crystal mass of 6.2 kg. Each detector module contains a scintillating crystal with two MMC channels for heat and light detection. We report the present status of the experiment and the performance of the detector modules.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1235 additional authors not shown)
Abstract:
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is…
▽ More
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons.
△ Less
Submitted 31 May, 2023; v1 submitted 2 November, 2022;
originally announced November 2022.
-
A lab scale experiment for keV sterile neutrino search
Authors:
Y. C. Lee,
H. B. Kim,
H. L. Kim,
S. K. Kim,
Y. H. Kim,
D. H. Kwon,
H. S. Lim,
H. S. Park,
K. R. Woo,
Y. S. Yoon
Abstract:
We developed a simple small-scale experiment to measure the beta decay spectrum of $^{3}$H. The aim of this research is to investigate the presence of sterile neutrinos in the keV region. Tritium nuclei were embedded in a 1$\times$1$\times$1 cm$^3$ LiF crystal from the $^6$Li(n,$α$)$^3$H reaction. The energy of the beta electrons absorbed in the LiF crystal was measured with a magnetic microcalori…
▽ More
We developed a simple small-scale experiment to measure the beta decay spectrum of $^{3}$H. The aim of this research is to investigate the presence of sterile neutrinos in the keV region. Tritium nuclei were embedded in a 1$\times$1$\times$1 cm$^3$ LiF crystal from the $^6$Li(n,$α$)$^3$H reaction. The energy of the beta electrons absorbed in the LiF crystal was measured with a magnetic microcalorimeter at 40 mK. We report a new method of sample preparation, experiments, and analysis of $^3$H beta measurements. The spectrum of a 10-hour measurement agrees well with the expected spectrum of $^3$H beta decay. The analysis results indicate that this method can be used to search for keV-scale sterile neutrinos.
△ Less
Submitted 21 October, 2022; v1 submitted 20 October, 2022;
originally announced October 2022.
-
Gate-tunable quantum pathways of high harmonic generation in graphene
Authors:
Soonyoung Cha,
Minjeong Kim,
Youngjae Kim,
Shinyoung Choi,
Sejong Kang,
Hoon Kim,
Sangho Yoon,
Gunho Moon,
Taeho Kim,
Ye Won Lee,
Gil Young Cho,
Moon Jeong Park,
Cheol-Joo Kim,
B. J. Kim,
JaeDong Lee,
Moon-Ho Jo,
Jonghwan Kim
Abstract:
Under strong laser fields, electrons in solids radiate high-harmonic fields by travelling through quantum pathways in Bloch bands in the sub-laser-cycle timescales. Understanding these pathways in the momentum space through the high-harmonic radiation can enable an all-optical ultrafast probe to observe coherent lightwave-driven processes and measure electronic structures as recently demonstrated…
▽ More
Under strong laser fields, electrons in solids radiate high-harmonic fields by travelling through quantum pathways in Bloch bands in the sub-laser-cycle timescales. Understanding these pathways in the momentum space through the high-harmonic radiation can enable an all-optical ultrafast probe to observe coherent lightwave-driven processes and measure electronic structures as recently demonstrated for semiconductors. However, such demonstration has been largely limited for semimetals because the absence of the bandgap hinders an experimental characterization of the exact pathways. In this study, by combining electrostatic control of chemical potentials with HHG measurement, we resolve quantum pathways of massless Dirac fermions in graphene under strong laser fields. Electrical modulation of HHG reveals quantum interference between the multi-photon interband excitation channels. As the light-matter interaction deviates beyond the perturbative regime, elliptically polarized laser fields efficiently drive massless Dirac fermions via an intricate coupling between the interband and intraband transitions, which is corroborated by our theoretical calculations. Our findings pave the way for strong-laser-field tomography of Dirac electrons in various quantum semimetals and their ultrafast electronics with a gate control.
△ Less
Submitted 16 October, 2022;
originally announced October 2022.
-
Customising radiative decay dynamics of two-dimensional excitons via position- and polarisation-dependent vacuum-field interference
Authors:
Sanghyeok Park,
Dongha Kim,
Yun-Seok Choi,
Arthur Baucour,
Donghyeong Kim,
Sangho Yoon,
Kenji Watanabe,
Takashi Taniguchi,
Jonghwa Shin,
Jonghwan Kim,
Min-Kyo Seo
Abstract:
Embodying bosonic and electrically interactive characteristics in two-dimensional space, excitons in transition-metal dichalcogenides (TMDCs) have garnered considerable attention. The realisation and application of strong-correlation effects, long-range transport, and valley-dependent optoelectronic properties require customising exciton decay dynamics. Strains, defects, and electrostatic doping e…
▽ More
Embodying bosonic and electrically interactive characteristics in two-dimensional space, excitons in transition-metal dichalcogenides (TMDCs) have garnered considerable attention. The realisation and application of strong-correlation effects, long-range transport, and valley-dependent optoelectronic properties require customising exciton decay dynamics. Strains, defects, and electrostatic doping effectively control the decay dynamics but significantly disturb the intrinsic properties of TMDCs, such as electron band structure and exciton binding energy. Meanwhile, vacuum-field manipulation provides an optical alternative for engineering radiative decay dynamics. Planar mirrors and cavities have been employed to manage the light-matter interactions of two-dimensional excitons. However, the conventional flat platforms cannot customise the radiative decay landscape in the horizontal TMDC plane or independently control vacuum field interference at different pumping and emission frequencies. Here, we present a meta-mirror resolving the issues with more optical freedom. For neutral excitons of the monolayer MoSe2, the meta-mirror manipulated the radiative decay rate by two orders of magnitude, depending on its geometry. Moreover, we experimentally identified the correlation between emission intensity and spectral linewidth. The anisotropic meta-mirror demonstrated polarisation-dependent radiative decay control. We expect that the meta-mirror platform will be promising to tailor the two-dimensional distributions of lifetime, density, and diffusion of TMDC excitons in advanced opto-excitonic applications.
△ Less
Submitted 9 August, 2022;
originally announced August 2022.
-
Electro-Optical Sampling of Single-Cycle THz Fields with Single-Photon Detectors
Authors:
Taylor Shields,
Adetunmise C. Dada,
Lennart Hirsch,
Seungjin Yoon,
Jonathan M. R. Weaver,
Daniele Faccio,
Lucia Caspani,
Marco Peccianti,
Matteo Clerici
Abstract:
Electro-optical sampling of Terahertz fields with ultrashort pulsed probes is a well-established approach for directly measuring the electric field of THz radiation. This technique usually relies on balanced detection to record the optical phase shift brought by THz-induced birefringence. The sensitivity of electro-optical sampling is, therefore, limited by the shot noise of the probe pulse, and i…
▽ More
Electro-optical sampling of Terahertz fields with ultrashort pulsed probes is a well-established approach for directly measuring the electric field of THz radiation. This technique usually relies on balanced detection to record the optical phase shift brought by THz-induced birefringence. The sensitivity of electro-optical sampling is, therefore, limited by the shot noise of the probe pulse, and improvements could be achieved using quantum metrology approaches using, e.g., NOON states for Heisenberg-limited phase estimation. We report on our experiments on THz electro-optical sampling using single-photon detectors and a weak squeezed vacuum field as the optical probe. Our approach achieves field sensitivity limited by the probe state statistical properties using phase-locked single-photon detectors and paves the way for further studies targeting quantum-enhanced THz sensing.
△ Less
Submitted 12 December, 2022; v1 submitted 3 August, 2022;
originally announced August 2022.
-
Photoluminescence Path Bifurcations by Spin Flip in Two-Dimensional CrPS4
Authors:
Suhyeon Kim,
Sangho Yoon,
Hyo-Bin Ahn,
Gangtae Jin,
Hyesun Kim,
Moon-Ho Jo,
Changgu Lee,
Jonghwan Kim,
Sunmin Ryu
Abstract:
Ultrathin layered crystals of coordinated chromium(III) are promising not only as two-dimensional (2D) magnets but also as 2D near-infrared (NIR) emitters owing to long-range spin correlation and efficient transition between high and low-spin excited states of Cr3+ ions. In this study, we report on dual-band NIR photoluminescence (PL) of CrPS4 and show that its excitonic emission bifurcates into f…
▽ More
Ultrathin layered crystals of coordinated chromium(III) are promising not only as two-dimensional (2D) magnets but also as 2D near-infrared (NIR) emitters owing to long-range spin correlation and efficient transition between high and low-spin excited states of Cr3+ ions. In this study, we report on dual-band NIR photoluminescence (PL) of CrPS4 and show that its excitonic emission bifurcates into fluorescence and phosphorescence depending on thickness, temperature and defect density. In addition to the spectral branching, the biexponential decay of PL transients, also affected by the three factors, could be well described within a three-level kinetic model for Cr(III). In essence, the PL bifurcations are governed by activated reverse intersystem crossing from the low to high-spin states, and the transition barrier becomes lower for thinner 2D samples because of surface-localized defects. Our findings can be generalized to 2D solids of coordinated metals and will be valuable in realizing novel magneto-optic functions and devices.
△ Less
Submitted 20 September, 2022; v1 submitted 8 June, 2022;
originally announced June 2022.
-
Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1202 additional authors not shown)
Abstract:
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and…
▽ More
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties
△ Less
Submitted 3 June, 2022; v1 submitted 30 March, 2022;
originally announced March 2022.
-
High-throughput volumetric adaptive optical imaging using compressed time-reversal matrix
Authors:
Hojun Lee,
Seokchan Yoon,
Pascal Loohuis,
Jin Hee Hong,
Sungsam Kang,
Wonshik Choi
Abstract:
Deep-tissue optical imaging suffers from the reduction of resolving power due to tissue-induced optical aberrations and multiple scattering noise. Reflection matrix approaches recording the maps of backscattered waves for all the possible orthogonal input channels have provided formidable solutions for removing severe aberrations and recovering the ideal diffraction-limited spatial resolution with…
▽ More
Deep-tissue optical imaging suffers from the reduction of resolving power due to tissue-induced optical aberrations and multiple scattering noise. Reflection matrix approaches recording the maps of backscattered waves for all the possible orthogonal input channels have provided formidable solutions for removing severe aberrations and recovering the ideal diffraction-limited spatial resolution without relying on fluorescence labeling and guide stars. However, measuring the full input-output response of the tissue specimen is time-consuming, making the real-time image acquisition difficult. Here, we present the use of a time-reversal matrix, instead of the reflection matrix, for fast high-resolution volumetric imaging of a mouse brain. The time-reversal matrix reduces two-way problem to one-way problem, which effectively relieves the requirement for the coverage of input channels. Using a newly developed aberration correction algorithm designed for the time-reversal matrix, we demonstrated the correction of complex aberrations using as small as 2 % of the complete basis while maintaining the image reconstruction fidelity comparable to the fully sampled reflection matrix. Due to nearly 100-fold reduction in the matrix recording time, we could achieve real-time aberration-correction imaging for a field of view of 40 x 40 microns (176 x 176 pixels) at a frame rate of 80 Hz. Furthermore, we demonstrated high-throughput volumetric adaptive optical imaging of a mouse brain by recording a volume of 128 x 128 x 125 microns (568 x 568 x 125 voxels) in 3.58 s, correcting tissue aberrations at each and every 1-micron depth section, and visualizing myelinated axons with a lateral resolution of 0.45 microns and an axial resolution of 2 microns.
△ Less
Submitted 14 September, 2021;
originally announced September 2021.
-
Automated Cardiac Resting Phase Detection Targeted on the Right Coronary Artery
Authors:
Seung Su Yoon,
Elisabeth Preuhs,
Michaela Schmidt,
Christoph Forman,
Teodora Chitiboi,
Puneet Sharma,
Juliano Lara Fernandes,
Christoph Tillmanns,
Jens Wetzl,
Andreas Maier
Abstract:
Static cardiac imaging such as late gadolinium enhancement, mapping, or 3-D coronary angiography require prior information, e.g., the phase during a cardiac cycle with least motion, called resting phase (RP). The purpose of this work is to propose a fully automated framework that allows the detection of the right coronary artery (RCA) RP within CINE series. The proposed prototype system consists o…
▽ More
Static cardiac imaging such as late gadolinium enhancement, mapping, or 3-D coronary angiography require prior information, e.g., the phase during a cardiac cycle with least motion, called resting phase (RP). The purpose of this work is to propose a fully automated framework that allows the detection of the right coronary artery (RCA) RP within CINE series. The proposed prototype system consists of three main steps. First, the localization of the regions of interest (ROI) is performed. Second, the cropped ROI series are taken for tracking motions over all time points. Third, the output motion values are used to classify RPs. In this work, we focused on the detection of the area with the outer edge of the cross-section of the RCA as our target. The proposed framework was evaluated on 102 clinically acquired dataset at 1.5T and 3T. The automatically classified RPs were compared with the reference RPs annotated manually by a expert for testing the robustness and feasibility of the framework. The predicted RCA RPs showed high agreement with the experts annotated RPs with 92.7% accuracy, 90.5% sensitivity and 95.0% specificity for the unseen study dataset. The mean absolute difference of the start and end RP was 13.6 $\pm$ 18.6 ms for the validation study dataset (n=102). In this work, automated RP detection has been introduced by the proposed framework and demonstrated feasibility, robustness, and applicability for static imaging acquisitions.
△ Less
Submitted 31 January, 2023; v1 submitted 6 September, 2021;
originally announced September 2021.
-
Alpha backgrounds in the AMoRE-Pilot experiment
Authors:
V. Alenkov,
H. W. Bae,
J. Beyer,
R. S. Boiko,
K. Boonin,
O. Buzanov,
N. Chanthima,
M. K. Cheoun,
S. H. Choi,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. Gangapshev,
L. Gastaldo,
Yu. M. Gavriljuk,
A. Gezhaev,
V. D. Grigoryeva,
V. Gurentsov,
D. H. Ha,
C. Ha,
E. J. Ha,
I. Hahn,
E. J. Jeon
, et al. (81 additional authors not shown)
Abstract:
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit…
▽ More
The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model.
△ Less
Submitted 5 December, 2022; v1 submitted 16 July, 2021;
originally announced July 2021.
-
GeoT: A Geometry-aware Transformer for Reliable Molecular Property Prediction and Chemically Interpretable Representation Learning
Authors:
Bumju Kwak,
Jiwon Park,
Taewon Kang,
Jeonghee Jo,
Byunghan Lee,
Sungroh Yoon
Abstract:
In recent years, molecular representation learning has emerged as a key area of focus in various chemical tasks. However, many existing models fail to fully consider the geometric information of molecular structures, resulting in less intuitive representations. Moreover, the widely used message-passing mechanism is limited to provide the interpretation of experimental results from a chemical persp…
▽ More
In recent years, molecular representation learning has emerged as a key area of focus in various chemical tasks. However, many existing models fail to fully consider the geometric information of molecular structures, resulting in less intuitive representations. Moreover, the widely used message-passing mechanism is limited to provide the interpretation of experimental results from a chemical perspective. To address these challenges, we introduce a novel Transformer-based framework for molecular representation learning, named the Geometry-aware Transformer (GeoT). GeoT learns molecular graph structures through attention-based mechanisms specifically designed to offer reliable interpretability, as well as molecular property prediction. Consequently, GeoT can generate attention maps of interatomic relationships associated with training objectives. In addition, GeoT demonstrates comparable performance to MPNN-based models while achieving reduced computational complexity. Our comprehensive experiments, including an empirical simulation, reveal that GeoT effectively learns the chemical insights into molecular structures, bridging the gap between artificial intelligence and molecular sciences.
△ Less
Submitted 28 June, 2023; v1 submitted 29 June, 2021;
originally announced June 2021.
-
Flexible dual-branched message passing neural network for quantum mechanical property prediction with molecular conformation
Authors:
Jeonghee Jo,
Bumju Kwak,
Byunghan Lee,
Sungroh Yoon
Abstract:
A molecule is a complex of heterogeneous components, and the spatial arrangements of these components determine the whole molecular properties and characteristics. With the advent of deep learning in computational chemistry, several studies have focused on how to predict molecular properties based on molecular configurations. Message passing neural network provides an effective framework for captu…
▽ More
A molecule is a complex of heterogeneous components, and the spatial arrangements of these components determine the whole molecular properties and characteristics. With the advent of deep learning in computational chemistry, several studies have focused on how to predict molecular properties based on molecular configurations. Message passing neural network provides an effective framework for capturing molecular geometric features with the perspective of a molecule as a graph. However, most of these studies assumed that all heterogeneous molecular features, such as atomic charge, bond length, or other geometric features always contribute equivalently to the target prediction, regardless of the task type. In this study, we propose a dual-branched neural network for molecular property prediction based on message-passing framework. Our model learns heterogeneous molecular features with different scales, which are trained flexibly according to each prediction target. In addition, we introduce a discrete branch to learn single atom features without local aggregation, apart from message-passing steps. We verify that this novel structure can improve the model performance with faster convergence in most targets. The proposed model outperforms other recent models with sparser representations. Our experimental results indicate that in the chemical property prediction tasks, the diverse chemical nature of targets should be carefully considered for both model performance and generalizability.
△ Less
Submitted 14 June, 2021;
originally announced June 2021.
-
γ-GeSe:a new hexagonal polymorph from group IV-VI monochalcogenides
Authors:
Sol Lee,
Joong-Eon Jung,
Han-gyu Kim,
Yangjin Lee,
Je Myoung Park,
Jeongsu Jang,
Sangho Yoon,
Arnab Ghosh,
Minseol Kim,
Joonho Kim,
Woongki Na,
Jonghwan Kim,
Hyoung Joon Choi,
Hyeonsik Cheong,
Kwanpyo Kim
Abstract:
The family of group IV-VI monochalcogenides has an atomically puckered layered structure, and their atomic bond configuration suggests the possibility for the realization of various polymorphs. Here, we report the synthesis of the first hexagonal polymorph from the family of group IV-VI monochalcogenides, which is conventionally orthorhombic. Recently predicted four-atomic-thick hexagonal GeSe, so…
▽ More
The family of group IV-VI monochalcogenides has an atomically puckered layered structure, and their atomic bond configuration suggests the possibility for the realization of various polymorphs. Here, we report the synthesis of the first hexagonal polymorph from the family of group IV-VI monochalcogenides, which is conventionally orthorhombic. Recently predicted four-atomic-thick hexagonal GeSe, so-called γ-GeSe, is synthesized and clearly identified by complementary structural characterizations, including elemental analysis, electron diffraction, high-resolution transmission electron microscopy imaging, and polarized Raman spectroscopy. The electrical and optical measurements indicate that synthesized γ-GeSe exhibits high electrical conductivity of 3x10^5 S/m, which is comparable to those of other two-dimensional layered semimetallic crystals. Moreover, γ-GeSe can be directly grown on h-BN substrates, demonstrating a bottom-up approach for constructing vertical van der Waals heterostructures incorporating γ-GeSe. The newly identified crystal symmetry of γ-GeSe warrants further studies on various physical properties of γ-GeSe.
△ Less
Submitted 11 May, 2021;
originally announced May 2021.
-
Charge Transfer as the Key Parameter Affecting Color Purity of TADF Emitters
Authors:
Ramin Ansari,
Wenhao Shao,
Seong-Jun Yoon,
Jinsang Kim,
John Kieffer
Abstract:
The key factors determining the emission bandwidth of thermally activated delayed fluorescence (TADF) are investi-gated by combining computational and experimental approaches. To achieve high internal quantum efficiencies (IQEs) in metal-free organic light emitting diode via TADF, the first triplet (T1) to first singlet (S1) reverse intersystem crossing (rISC) is promoted by configuring molecules…
▽ More
The key factors determining the emission bandwidth of thermally activated delayed fluorescence (TADF) are investi-gated by combining computational and experimental approaches. To achieve high internal quantum efficiencies (IQEs) in metal-free organic light emitting diode via TADF, the first triplet (T1) to first singlet (S1) reverse intersystem crossing (rISC) is promoted by configuring molecules in an electron donor-acceptor (D-A) alternation with a large di-hedral angle, which results in a small energy gap (ΔEST) between S1 and T1 levels. This allows for effective non-radiative up-conversion of triplet excitons to singlet excitons that fluoresce. However, this traditional molecular de-sign of TADF results in broad emission spectral bands (full-width at half-maximum = 70-100 nm). Despite reports suggesting that suppressing the D-A dihedral rotation narrows the emission band, the origin of emission broadening remains elusive. Indeed, our results suggest that the intrinsic TADF emission bandwidth is primarily determined by the charge transfer character of the molecule, rather than its propensity for rotational motion, which offers a renewed perspective on the rational molecular design of organic emitters exhibiting sharp emission spectra.
△ Less
Submitted 6 May, 2021;
originally announced May 2021.
-
Impact of field heterogeneity on the dynamics of the forced Kuramoto model
Authors:
S. Yoon,
E. A. P. Wright,
J. F. F. Mendes,
A. V. Goltsev
Abstract:
We studied the impact of field heterogeneity on entrainment in a system of uniformly interacting phase oscillators. Field heterogeneity is shown to induce dynamical heterogeneity in the system. In effect, the heterogeneous field partitions the system into interacting groups of oscillators that feel the same local field strength and phase. Based on numerical and analytical analysis of the explicit…
▽ More
We studied the impact of field heterogeneity on entrainment in a system of uniformly interacting phase oscillators. Field heterogeneity is shown to induce dynamical heterogeneity in the system. In effect, the heterogeneous field partitions the system into interacting groups of oscillators that feel the same local field strength and phase. Based on numerical and analytical analysis of the explicit dynamical equations derived from the periodically forced Kuramoto model, we found that the heterogeneous field can disrupt entrainment at different field frequencies when compared to the homogeneous field. This transition occurs when the phase- and frequency-locked synchronization between groups of oscillators is broken at a critical field frequency, causing each group to enter a new dynamical state (disrupted state). Strikingly, it is shown that disrupted dynamics can differ between groups.
△ Less
Submitted 26 April, 2021;
originally announced April 2021.
-
Witness electron beam injection using an active plasma lens for a proton beam-driven plasma wakefield accelerator
Authors:
S. -Y. Kim,
K. Moon,
M. Chung,
K. N. Sjobak,
E. Adli,
S. Doebert,
M. Dayyani,
E. S. Yoon,
I. Nam,
G. Hahn
Abstract:
An active plasma lens focuses the beam in both the horizontal and vertical planes simultaneously using a magnetic field generated by a discharge current through the plasma. A beam size of 5--10 $μ$m can be achieved within a short distance using a focusing gradient on the order of 100 T/m. The active plasma lens is therefore an attractive element for plasma wakefield acceleration, because an ultra-…
▽ More
An active plasma lens focuses the beam in both the horizontal and vertical planes simultaneously using a magnetic field generated by a discharge current through the plasma. A beam size of 5--10 $μ$m can be achieved within a short distance using a focusing gradient on the order of 100 T/m. The active plasma lens is therefore an attractive element for plasma wakefield acceleration, because an ultra-small size of the witness electron beam is required for injection into the plasma wakefield to minimize emittance growth and to enhance the capturing efficiency. When the drive beam and witness electron beam co-propagate through the active plasma lens, interactions between the drive and witness beams, and the plasma must be considered. In this paper, through particle-in-cell simulations, we discuss the possibility of using an active plasma lens for the final focusing of the electron beam for the AWAKE RUN 2 experiments. It is confirmed that the amplitude of the plasma wakefield excited by proton bunches remains the same even after propagation through the active plasma lens. The emittance of the witness electron beam increases rapidly in the plasma density ramp regions of the lens. Nevertheless, when the witness electron beam has a charge of 100 pC, emittance of 10 mm mrad, and bunch length of 60 $μ$m, its emittance growth is not significant along the active plasma lens. For small emittance, such as 2 mm mrad, the emittance growth is found to be strongly dependent on the RMS beam size, plasma density, and multiple Coulomb scattering.
△ Less
Submitted 10 December, 2021; v1 submitted 20 April, 2021;
originally announced April 2021.
-
First observation of a nuclear $s$-state of $Ξ$ hypernucleus, $^{15}_Ξ{\rm C}$
Authors:
M. Yoshimoto,
J. K. Ahn,
B. Bassalleck,
H. Ekawa,
Y. Endo,
M. Fujita,
Y. Han,
T. Hashimoto,
S. H. Hayakawa,
K. Hicks,
K. Hoshino,
S. Hoshino,
S. H. Hwang,
Y. Ichikawa,
M. Ichikawa,
K. Imai,
Y. Ishikawa,
H. Kanauchi,
A. Kasagi,
S. H. Kim,
S. Kinbara,
P. M. Lin,
T. L. Ma,
K. Miwa,
A. T. Moe
, et al. (24 additional authors not shown)
Abstract:
Bound-systems of $Ξ^-$--$^{14}_{}{\rm N}$ are studied via $Ξ^-$ capture at rest followed by emission of a twin single-$Λ$ hypernucleus in the emulsion detectors. Two events forming extremely deep $Ξ^-$ bound states were obtained by analysis of a hybrid method in the E07 experiment at J-PARC and reanalysis of the E373 experiment at KEK-PS. The decay mode of one event was assigned as…
▽ More
Bound-systems of $Ξ^-$--$^{14}_{}{\rm N}$ are studied via $Ξ^-$ capture at rest followed by emission of a twin single-$Λ$ hypernucleus in the emulsion detectors. Two events forming extremely deep $Ξ^-$ bound states were obtained by analysis of a hybrid method in the E07 experiment at J-PARC and reanalysis of the E373 experiment at KEK-PS. The decay mode of one event was assigned as $Ξ^-+^{14}_{}{\rm N}\to^{5}_Λ{\rm He}$+$^{5}_Λ{\rm He}$+$^{4}_{}{\rm He}$+n. Since there are no excited states for daughter particles, the binding energy of the $Ξ^-$ hyperon, $B_{Ξ^-}$, in $^{14}_{}{\rm N}$ nucleus was uniquely determined to be 6.27 $\pm$ 0.27 MeV. Another $Ξ^-$--$^{14}_{}{\rm N}$ system via the decay $^{9}_Λ{\rm Be}$ + $^{5}_Λ{\rm He}$ + n brings a $B_{Ξ^-}$ value, 8.00 $\pm$ 0.77 MeV or 4.96 $\pm$ 0.77 MeV, where the two possible values of $B_{Ξ^-}$ correspond to the ground and the excited states of the daughter $^{9}_Λ{\rm Be}$ nucleus, respectively. Because the $B_{Ξ^-}$ values are larger than those of the previously reported events (KISO and IBUKI), which are both interpreted as the nuclear $1p$ state of the $Ξ^-$--$^{14}_{}{\rm N}$ system, these new events give the first indication of the nuclear $1s$ state of the $Ξ$ hypernucleus, $^{15}_Ξ{\rm C}$.
△ Less
Submitted 26 May, 2021; v1 submitted 15 March, 2021;
originally announced March 2021.
-
Virtual Alignment Method and its application to the dental prostheses and diagnosis
Authors:
Kyungtaek Jun,
Seokhwan Yoon,
Jae-Hong Lim,
SeungJoon Noh
Abstract:
The recent proposal of a new alignment solution for X-ray tomography, Virtual alignment method (VAM) allowed a more accurate method to remove the possible errors that limit the resolution and clarity of the reconstructed image. In the field of dentistry, the movement of patients during the scanning poses as one of the major factors hindering the final reconstructed image quality. Here, the patient…
▽ More
The recent proposal of a new alignment solution for X-ray tomography, Virtual alignment method (VAM) allowed a more accurate method to remove the possible errors that limit the resolution and clarity of the reconstructed image. In the field of dentistry, the movement of patients during the scanning poses as one of the major factors hindering the final reconstructed image quality. Here, the patient's movement was artificially given to the projection image set and the newly proposed algorithm using the sinogram and the fixed point was applied to the tooth sample to compare the reconstruction image to the actual projection image set. The new alignment method showed promising results by reducing the margin of errors down to a few micrometer, which will allow the production of high-quality dental prostheses with accuracy and precision. We hope that the newly proposed alignment method can be further investigated to be applied more readily in the filed of dentistry ot provide better quality images of patients to make a more accurate diagnosis and prostheses.
△ Less
Submitted 25 October, 2020;
originally announced October 2020.
-
Pulse Shape Discrimination of Fast Neutron Background using Convolutional Neural Network for NEOS II
Authors:
NEOS II Collaboration,
Y. Jeong,
B. Y. Han,
E. J. Jeon,
H. S. Jo,
D. K. Kim,
J. Y. Kim,
J. G. Kim,
Y. D. Kim,
Y. J. Ko,
H. M. Lee,
M. H. Lee,
J. Lee,
C. S. Moon,
Y. M. Oh,
H. K. Park,
K. S. Park,
S. H. Seo,
K. Siyeon,
G. M. Sun,
Y. S. Yoon,
I. Yu
Abstract:
Pulse shape discrimination plays a key role in improving the signal-to-background ratio in NEOS analysis by removing fast neutrons. Identifying particles by looking at the tail of the waveform has been an effective and plausible approach for pulse shape discrimination, but has the limitation in sorting low energy particles. As a good alternative, the convolutional neural network can scan the entir…
▽ More
Pulse shape discrimination plays a key role in improving the signal-to-background ratio in NEOS analysis by removing fast neutrons. Identifying particles by looking at the tail of the waveform has been an effective and plausible approach for pulse shape discrimination, but has the limitation in sorting low energy particles. As a good alternative, the convolutional neural network can scan the entire waveform as they are to recognize the characteristics of the pulse and perform shape classification of NEOS data. This network provides a powerful identification tool for all energy ranges and helps to search unprecedented phenomena of low-energy, a few MeV or less, neutrinos.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
A Silicon Beam Tracker
Authors:
J. H. Han,
H. S. Ahn,
J. B. Bae,
H. J. Hyun,
S. W. Jung,
D. H. Kah,
C. H. Kim,
H. J. Kim,
K. C. Kim,
M. H. Lee,
L. Lutz,
A. Malinin,
H. Park,
S. Ryu,
E. S. Seo,
P. Walpole,
J. Wu,
J. H. Yoo,
Y. S. Yoon,
S. Y. Zinn
Abstract:
When testing and calibrating particle detectors in a test beam, accurate tracking information independent of the detector being tested is extremely useful during the offline analysis of the data. A general-purpose Silicon Beam Tracker (SBT) was constructed with an active area of 32.0 x 32.0 mm2 to provide this capability for the beam calibration of the Cosmic Ray Energetics And Mass (CREAM) calori…
▽ More
When testing and calibrating particle detectors in a test beam, accurate tracking information independent of the detector being tested is extremely useful during the offline analysis of the data. A general-purpose Silicon Beam Tracker (SBT) was constructed with an active area of 32.0 x 32.0 mm2 to provide this capability for the beam calibration of the Cosmic Ray Energetics And Mass (CREAM) calorimeter. The tracker consists of two modules, each comprised of two orthogonal layers of 380 μm thick silicon strip sensors. In one module each layer is a 64-channel AC-coupled single-sided silicon strip detector (SSD) with a 0.5 mm pitch. In the other, each layer is a 32-channel DC-coupled single-sided SSD with a 1.0 mm pitch. The signals from the 4 layers are read out using modified CREAM hodoscope front-end electronics with a USB 2.0 interface board to a Linux DAQ PC. In this paper, we present the construction of the SBT, along with its performance in radioactive source tests and in a CERN beam test in October 2006.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Structural Patterns and Generative Models of Real-world Hypergraphs
Authors:
Manh Tuan Do,
Se-eun Yoon,
Bryan Hooi,
Kijung Shin
Abstract:
Graphs have been utilized as a powerful tool to model pairwise relationships between people or objects. Such structure is a special type of a broader concept referred to as hypergraph, in which each hyperedge may consist of an arbitrary number of nodes, rather than just two. A large number of real-world datasets are of this form - for example, list of recipients of emails sent from an organization…
▽ More
Graphs have been utilized as a powerful tool to model pairwise relationships between people or objects. Such structure is a special type of a broader concept referred to as hypergraph, in which each hyperedge may consist of an arbitrary number of nodes, rather than just two. A large number of real-world datasets are of this form - for example, list of recipients of emails sent from an organization, users participating in a discussion thread or subject labels tagged in an online question. However, due to complex representations and lack of adequate tools, little attention has been paid to exploring the underlying patterns in these interactions.
In this work, we empirically study a number of real-world hypergraph datasets across various domains. In order to enable thorough investigations, we introduce the multi-level decomposition method, which represents each hypergraph by a set of pairwise graphs. Each pairwise graph, which we refer to as a k-level decomposed graph, captures the interactions between pairs of subsets of k nodes. We empirically find that at each decomposition level, the investigated hypergraphs obey five structural properties. These properties serve as criteria for evaluating how realistic a hypergraph is, and establish a foundation for the hypergraph generation problem. We also propose a hypergraph generator that is remarkably simple but capable of fulfilling these evaluation metrics, which are hardly achieved by other baseline generator models.
△ Less
Submitted 12 June, 2020;
originally announced June 2020.
-
Possibility of using Parallel beam CT in dental treatment by correction of movement errors with virtual Alignment Method
Authors:
Seokhwan Yoon,
Seong-Kyun Kim,
Kyungtaek Jun
Abstract:
The purpose of this study is to correct the movement errors that may occur because of the patients' movement during the CT scanning and thus, to obtain more precise CT images, additionally to investigate the possible use of Parallel Beam CT in the dental treatment. An extracted human tooth was scanned with PBCT and the possible movement errors that patients may cause during the CT scan were intent…
▽ More
The purpose of this study is to correct the movement errors that may occur because of the patients' movement during the CT scanning and thus, to obtain more precise CT images, additionally to investigate the possible use of Parallel Beam CT in the dental treatment. An extracted human tooth was scanned with PBCT and the possible movement errors that patients may cause during the CT scan were intentionally assigned. The maximum width of errors was designed to reach 0.1 mm. The trajectory of the fixed point was traced in the sinogram that includes the fixed point. The part deviated from the sinusoidal curve was modified using the Virtual Alignment Method. The quality of reconstructed image was remarkably degraded when the movement errors were given. A radiopaque part inside the tooth was used as a fixed point. The errors were corrected by shifting the fixed point to the center of sinogram and this relocation of fixed point did not cause any distortion of image or change of size. The movement errors were corrected with the fixed point inside the tooth. The more precise CT images obtained through this method are expected to be of extensive application in the area of dental treatment using CAD/CAM.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Performance of the ISS-CREAM calorimeter in a calibration beam test
Authors:
H. G. Zhang,
D. Angelaszek,
M. Copley,
J. H. Han,
H. G. Huh,
Y. S. Hwang,
H. J. Hyun,
J. A. Jeon,
K. C. Kim,
M. H. Kim,
H. J. Kim,
K. Kwashnak,
H. Y. Lee,
J. Lee,
M. H. Lee,
J. Lundquist,
L. Lutz,
A. Malinin,
H. Park,
J. M. Park,
N. Picot-Clemente,
E. S. Seo,
J. Smith,
J. Wu,
Z. Y. Yin
, et al. (1 additional authors not shown)
Abstract:
The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) was installed on the ISS to measure high-energy cosmic-ray elemental spectra for the charge range $\rm Z=1$ to 26. The ISS-CREAM instrument includes a tungsten scintillating-fiber calorimeter preceded by a carbon target for energy measurements. The carbon target induces hadronic interactions, and showers…
▽ More
The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) was installed on the ISS to measure high-energy cosmic-ray elemental spectra for the charge range $\rm Z=1$ to 26. The ISS-CREAM instrument includes a tungsten scintillating-fiber calorimeter preceded by a carbon target for energy measurements. The carbon target induces hadronic interactions, and showers of secondary particles develop in the calorimeter. The energy deposition in the calorimeter is proportional to the particle energy.
As a predecessor to ISS-CREAM, the balloon-borne CREAM instrument was successfully flown seven times over Antarctica for a cumulative exposure of 191 days. The CREAM calorimeter demonstrated its capability to measure energies of cosmic-ray particles, and the ISS-CREAM calorimeter is expected to have a similar performance. Before the launch, an engineering-unit calorimeter was shipped to CERN for calibration and performance tests. This beam test included position, energy, and angle scans of electron and pion beams together with a high-voltage scan for calibration and characterization. Additionally, an attenuation effect in the scintillating fibers was studied. In this paper, beam test results, including corrections for the attenuation effect, are presented.
△ Less
Submitted 9 June, 2021; v1 submitted 21 April, 2020;
originally announced April 2020.
-
SND@LHC
Authors:
SHiP Collaboration,
C. Ahdida,
A. Akmete,
R. Albanese,
A. Alexandrov,
M. Andreini,
A. Anokhina,
S. Aoki,
G. Arduini,
E. Atkin,
N. Azorskiy,
J. J. Back,
A. Bagulya,
F. Baaltasar Dos Santos,
A. Baranov,
F. Bardou,
G. J. Barker,
M. Battistin,
J. Bauche,
A. Bay,
V. Bayliss,
G. Bencivenni,
A. Y. Berdnikov,
Y. A. Berdnikov,
M. Bertani
, et al. (319 additional authors not shown)
Abstract:
We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1)…
▽ More
We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1) and, given the pseudo-rapidity range accessible, the corresponding neutrinos will mostly come from charm decays: the proposed experiment will thus make the first test of the heavy flavour production in a pseudo-rapidity range that is not accessible by the current LHC detectors. In order to efficiently reconstruct neutrino interactions and identify their flavour, the detector will combine in the target region nuclear emulsion technology with scintillating fibre tracking layers and it will adopt a muon identification system based on scintillating bars that will also play the role of a hadronic calorimeter. The time of flight measurement will be achieved thanks to a dedicated timing detector. The detector will be a small-scale prototype of the scattering and neutrino detector (SND) of the SHiP experiment: the operation of this detector will provide an important test of the neutrino reconstruction in a high occupancy environment.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
Pulsed-laser epitaxy of metallic delafossite PdCrO$_2$ films
Authors:
Jong Mok Ok,
Matthew Brahlek,
Woo Seok Choi,
Kevin M. Roccapriore,
Matthew F. Chisholm,
Soyeun Kim,
Changhee Sohn,
Elizabeth Skoropata,
Sangmoon Yoon,
Jun Sung Kim,
Ho Nyung Lee
Abstract:
Alternate stacking of a highly conducting metallic layer with a magnetic triangular layer found in delafossite PdCrO2 provides an excellent platform for discovering intriguing correlated quantum phenomena. Thin film growth of the material may enable not only tuning the basic physical properties beyond what bulk materials can exhibit, but also developing novel hybrid materials by interfacing with d…
▽ More
Alternate stacking of a highly conducting metallic layer with a magnetic triangular layer found in delafossite PdCrO2 provides an excellent platform for discovering intriguing correlated quantum phenomena. Thin film growth of the material may enable not only tuning the basic physical properties beyond what bulk materials can exhibit, but also developing novel hybrid materials by interfacing with dissimilar materials, yet this has proven to be extremely challenging. Here, we report the epitaxial growth of metallic delafossite PdCrO2 films by pulsed laser epitaxy (PLE). The fundamental role of the PLE growth conditions, epitaxial strain, and chemical and structural characteristics of the substrate is investigated by growing under various growth conditions and on various types of substrates. While strain plays a large role in improving the crystallinities, the direct growth of epitaxial PdCrO2 films without impurity phases was not successful. We attribute this difficulty to both the chemical and structural dissimilarities between the substrates and volatile nature of PdO layer, which make nucleation of the right phase difficult. This difficulty was overcome by growing CuCrO2 buffer layers before PdCrO2 were grown. Unlike PdCrO2, CuCrO2 films were rather readily grown with a relatively wide growth window. Only monolayer thick buffer layer was sufficient to grow the correct PdCrO2 phase. This result indicates that the epitaxy of Pd-based delafossites is extremely sensitive to the chemistry and structure of the interface, necessitating near perfect substrate materials. The resulting films are commensurately strained and show an antiferromagnetic transition at 40 K that persists down to as thin as 3.6 nm in thickness.
△ Less
Submitted 20 February, 2020; v1 submitted 19 February, 2020;
originally announced February 2020.
-
Laser scanning reflection-matrix microscopy for label-free in vivo imaging of a mouse brain through an intact skull
Authors:
Seokchan Yoon,
Hojun Lee,
Jin Hee Hong,
Yong-Sik Lim,
Wonshik Choi
Abstract:
We present a laser scanning reflection-matrix microscopy combining the scanning of laser focus and the wide-field mapping of the electric field of the backscattered waves for eliminating higher-order aberrations even in the presence of strong multiple light scattering noise. Unlike conventional confocal laser scanning microscopy, we record the amplitude and phase maps of reflected waves from the s…
▽ More
We present a laser scanning reflection-matrix microscopy combining the scanning of laser focus and the wide-field mapping of the electric field of the backscattered waves for eliminating higher-order aberrations even in the presence of strong multiple light scattering noise. Unlike conventional confocal laser scanning microscopy, we record the amplitude and phase maps of reflected waves from the sample not only at the confocal pinhole, but also at other non-confocal points. These additional measurements lead us to constructing a time-resolved reflection matrix, with which the sample-induced aberrations for the illumination and detection pathways are separately identified and corrected. We realized in vivo reflectance imaging of myelinated axons through an intact skull of a living mouse with the spatial resolution close to the ideal diffraction limit. Furthermore, we demonstrated near-diffraction-limited multiphoton imaging through an intact skull by physically correcting the aberrations identified from the reflection matrix. The proposed method is expected to extend the range of applications, where the knowledge of the detailed microscopic information deep within biological tissues is critical.
△ Less
Submitted 8 October, 2019;
originally announced October 2019.
-
Quantum efficiency enhancement of bialkali photocathodes by an atomically thin layer on substrates
Authors:
Hisato Yamaguchi,
Fangze Liu,
Jeffrey DeFazio,
Mengjia Gaowei,
Lei Guo,
Anna Alexander,
Seong In Yoon,
Chohee Hyun,
Matthew Critchley,
John Sinsheimer,
Vitaly Pavlenko,
Derek Strom,
Kevin L. Jensen,
Daniel Finkenstadt,
Hyeon Suk Shin,
Masahiro Yamamoto,
John Smedley,
Nathan A. Moody
Abstract:
We report quantum efficiency (QE) enhancements in accelerator technology relevant antimonide photocathodes (K2CsSb) by interfacing them with atomically thin two-dimensional (2D) crystal layers. The enhancement occurs in a reflection mode, when a 2D crystal is placed in between the photocathodes and optically reflective substrates. Specifically, the peak QE at 405 nm (3.1 eV) increases by a relativ…
▽ More
We report quantum efficiency (QE) enhancements in accelerator technology relevant antimonide photocathodes (K2CsSb) by interfacing them with atomically thin two-dimensional (2D) crystal layers. The enhancement occurs in a reflection mode, when a 2D crystal is placed in between the photocathodes and optically reflective substrates. Specifically, the peak QE at 405 nm (3.1 eV) increases by a relative 10 percent, while the long wavelength response at 633 nm (2.0 eV) increases by a relative 36 percent on average and up to 80 percent at localized hot spot regions when photocathodes are deposited onto graphene coated stainless steel. There is a similar effect for photocathodes deposited on hexagonal boron nitride monolayer coatings using nickel substrates. The enhancement does not occur when reflective substrates are replaced with optically transparent sapphire. Optical transmission, X-ray diffraction (XRD) and X-ray fluorescence (XRF) revealed that thickness, crystal orientation, quality and elemental stoichiometry of photocathodes do not appreciably change due to 2D crystal coatings. These results suggest optical interactions are responsible for the QE enhancements when 2D crystal sublayers are present on reflective substrates, and provide a pathway toward a simple method of QE enhancement in semiconductor photocathodes by an atomically thin 2D crystal on substrates.
△ Less
Submitted 2 October, 2019;
originally announced October 2019.
-
Microscopic imaging of non-repetitive dynamic scenes at 5 THz frame rates by time and spatial frequency multiplexing
Authors:
Jungho Moon,
Seok-Chan Yoon,
Yong-sik Lim,
Wonshik Choi
Abstract:
Femtosecond-scale ultrafast imaging is an essential tool for visualizing ultrafast dynamics in molecular biology, physical chemistry, atomic physics, and fluid dynamics. Pump-probe imaging and a streak camera are the most widely used techniques, but they are either demanding the repetitions of the same scene or sacrificing the number of imaging dimensions. Many interesting single-shot ultrafast im…
▽ More
Femtosecond-scale ultrafast imaging is an essential tool for visualizing ultrafast dynamics in molecular biology, physical chemistry, atomic physics, and fluid dynamics. Pump-probe imaging and a streak camera are the most widely used techniques, but they are either demanding the repetitions of the same scene or sacrificing the number of imaging dimensions. Many interesting single-shot ultrafast imaging techniques have been developed in recent years for recording non-repetitive dynamic scenes. Nevertheless, there are still weaknesses in the number of frames, the number of image pixels, or spatial/temporal resolution. Here, we present a single-shot ultrafast microscopy that can capture more than a dozen frames at a time with the frame rate of 5 THz. We combine a spatial light modulator and a custom-made echelon for efficiently generating a large number of reference pulses with designed time delays and propagation angles. The single-shot recording of the interference image between these reference pulses with a sample pulse allows us to retrieve the stroboscopic images of the dynamic scene at the timing of the reference pulses. We demonstrated the recording of 14 temporal snapshots at a time, which is the largest to date, with the optimal temporal resolution set by the laser output pulse. Our ultrafast microscopy is highly scalable in the number of frames and temporal resolutions, and this will have profound impacts on uncovering the interesting spatio-temporal dynamics yet to be explored.
△ Less
Submitted 1 September, 2019;
originally announced September 2019.
-
From Dye Sensitized to Perovskite Solar Cells, The Missing Link
Authors:
So-Min Yoo,
Seog Joon Yoon,
Juan A. Anta,
Hyo Joong Lee,
Pablo P. Boix,
Iván Mora-Seró
Abstract:
Fundamental working mechanisms of perovskite solar cells remain an elusive topic of research. Impedance Spectroscopy (IS) application to perovskite-based devices generates uncommon features and misleading outputs, mainly due to the lack of a stablished model for the interpretation of the results. In this work we control the perovskite precursor concentration to fabricate a series of perovskite-bas…
▽ More
Fundamental working mechanisms of perovskite solar cells remain an elusive topic of research. Impedance Spectroscopy (IS) application to perovskite-based devices generates uncommon features and misleading outputs, mainly due to the lack of a stablished model for the interpretation of the results. In this work we control the perovskite precursor concentration to fabricate a series of perovskite-based solar cells with different amounts of perovskite absorber. Low concentration devices present the well-known dye sensitized solar cell (DSSCs) impedance pattern. As the amount of perovskite is increased, the characteristic impedance spectra of thin-film perovskite solar cells (PSCs) arises. This transition is characterized by a change in the working principles, determined by an evolution of the dominant capacitance: from the intermediate frequency chemical capacitance of TiO2 in devices with isolated perovskite domains, to a large low-frequency capacitance signal which divides the spectra in two sections, yet with no direct influence in final device performance. This study allows to link experimentally, in terms of impedance behavior, PSCs with the rest of solar cell devices via DSSCs. We observe that it is not possible to assign a single physical origin to the different resistances determined in the impedance spectra except for the series resistance. In contrast, resistive element present contributions from different physical processes, observing a transport-recombination coupling. Based on this analysis we provide an equivalent circuit model to evaluate the impedance pattern of PSCs in terms of the processes directly affecting the final performance (i.e. considering transport-related and recombination-related losses), a crucial tool for further development of perovskite photovoltaics.
△ Less
Submitted 22 June, 2019; v1 submitted 28 May, 2019;
originally announced May 2019.
-
Roughness, Inertia, and Diffusion Effects on Anomalous Transport in Rough Channels
Authors:
Seonkyoo Yoon,
Peter K. Kang
Abstract:
We study how the complex interplay between roughness, inertia, and diffusion controls the tracer transport in rough channels. We first simulate the flow and tracer transport over wide ranges of channel roughness, Reynolds number ($Re$), and Péclet number ($Pe$) observable in nature. $Pe$ exerts a first-order control on first-passage time distributions, and the effect of roughness on the tracer tra…
▽ More
We study how the complex interplay between roughness, inertia, and diffusion controls the tracer transport in rough channels. We first simulate the flow and tracer transport over wide ranges of channel roughness, Reynolds number ($Re$), and Péclet number ($Pe$) observable in nature. $Pe$ exerts a first-order control on first-passage time distributions, and the effect of roughness on the tracer transport becomes evident with the increase in $Re$. The interplay between the roughness and $Re$ causes eddy flows, which intensify or suppress anomalous transport depending on $Pe$. At infinite $Pe$, the late-time scaling follows a universal power-law scaling, which is explained by conducting a scaling analysis. With extensive numerical simulations and stochastic modeling, we show that the roughness, inertia, and diffusion effects are encoded in Lagrangian velocity statistics represented by velocity distribution and correlation. We finally predict the anomalous transport using a stochastic model that considers the Lagrangian velocity statistics.
△ Less
Submitted 30 May, 2019; v1 submitted 21 May, 2019;
originally announced May 2019.
-
Direct Evidence of Torque-mediated Optical Magnetism
Authors:
M. Tuan Trinh,
Krishnandu Makhal,
Elizabeth F. C. Dreyer,
Apoorv Shanker,
Seong-Jun Yoon,
Jinsang Kim,
Stephen C. Rand
Abstract:
We report experimental evidence of a mechanism that supports and intensifies induced magnetization at optical frequencies without the intervention of spin-orbit or spin-spin interactions. Energy-resolved spectra of scattered light, recorded at moderate intensities (108 W/cm2) and short timescales (<150 fs) in a series of non-magnetic molecular liquids, reveal the signature of torque dynamics drive…
▽ More
We report experimental evidence of a mechanism that supports and intensifies induced magnetization at optical frequencies without the intervention of spin-orbit or spin-spin interactions. Energy-resolved spectra of scattered light, recorded at moderate intensities (108 W/cm2) and short timescales (<150 fs) in a series of non-magnetic molecular liquids, reveal the signature of torque dynamics driven jointly by the electric and magnetic field components of light at the molecular level. While past experiments have recorded radiant magnetization from magneto-electric interactions of this type, no evidence has been provided to date of the inelastic librational features expected in cross-polarized light scattering spectra due to the Lorentz force acting in combination with optical magnetic torque. Here, torque is shown to account for inelastic components in the magnetic scattering spectrum under conditions that produce no such features in electric dipole scattering, in excellent agreement with quantum theoretical predictions
△ Less
Submitted 1 May, 2019;
originally announced May 2019.