Fernando Mosqueda

The obtaining of phosphate fertilizers results in large amounts of residues that are frequently accumulated in deposits or pools occupying a wide area. These residues are acidic, and contain variable amounts of trace elements and radionuclides. The potentially polluting agents can be leached by rainwater, and so transferred to the surface waters and then to the groundwater after soil infiltration. Since the distribution and thickness of the residue deposits are variable, the contaminants cannot be easily traced back to a single, well defined source, and so a diffuse contamination (nonpoint source pollution) of the surrounding soils and waters occurs. This communication reports the results obtained in the study of soils close to the phosphogypsum deposits placed near Rio Tinto (Huelva, Spain). The zone is affected not only by the mentioned residues but also by the tides due to the vicinity of the sea. The samples studied had a low organic content and a low acidity with average values...

This paper presents a method for the determining 90Sr via its β-emitting daughter, 90Y, in environmental sam- ples by Cerenkov counting. The method is based on the isolation of 90Y by solvent extraction, using HDEHP as an extractor. The liquid scintillation (LS) analyzer Tri-Carb 3170 TR/SL has been employed. After radiochemical treatment, environmen- tal samples might be colored, and this

ABSTRACT The estuary formed by the confluence of Tinto and Odiel river‐mouths is located in the South of Spain, close to Huelva town. This estuary has been deeply studied through the years because it has a double particularity. On one hand, since the beginning of the 1960s, the estuary has been affected by direct and indirect phosphogypsum (pg.) releases from two phosphoric acid and fertilizers factories that are working in the area. On the other hand, the pyrite mining operations upstream the Odiel and Tinto rivers has caused historically the formation of H2SO4, through oxidation of the natural sulphur deposits, the acidification of the waters and the consequent mobilisation of heavy metals from the mining area to the Huelva estuary. As a consequence, enhancement contamination levels in natural emitters from the 238U series were found in the surroundings of the factories in the previous years to 1998. However, in 1998 the management policy of waste releases drastically changed in the area, and direct discharges to Tinto and Odiel River had to be ceased.

ABSTRACT Liquid scintillation counting (LSC) is an easy and straightforward technique, and combined with its low limit of detection, makes it a powerful tool for both routine and low level measurements that can be applied to 210Pb low level counting in environmental samples. 210Pb can be easily measured following a sulphate co-precipitation method; the addition of a carrier and the weighing of the recovered amount is a widespread technique to evaluate radiochemical yield, however, this evaluation of the recovery is sometimes questioned. The samples employed in this work were recollected in 1999 and 2005 from the estuary of the Odiel and Tinto rivers (SW of Spain), which were affected by phosphogypsum (pg.) discharges until 1998. Phosphogypsum contains most of the 210Pb from the treated raw material, for that reason analysed riverbed sediments have enhanced 210Pb activity concentrations and hence, enhanced activity concentration of its daughter 210Po, both in secular equilibrium after two years.

In order to fill a gap in the open literature, occupational exposures and activity concentrations have been assessed in two NORM industrial plants, located in the south-west of Spain, devoted to the production of mono-ammonium phosphate (MAP) and di-ammonium phosphate (DAP) fertilisers. The annual effective doses received by the workers from these plants are clearly below 1 mSv yr(-1) and the contribution due to external radiation is similar to that due to inhalation. The contribution to the maximum effective doses due to inhalation of particulate matter has been estimated to be about 0.12 mSv yr(-1), while the (222)Rn concentrations inside the plants are of no concern. Consequently, no additional actions or radiological protection measures need to be taken to decrease the natural radiation received by the workers in these facilities.

The determination of 90Sr through the Cerenkov radiation emitted by its descendant 90Y is a well-known method and firmly established in literature. Nevertheless, in order to obtain an accurate result based on a Cerenkov measurement, the experimental work must be extremely rigorous because the efficiency of Cerenkov counting is especially sensitive to the presence of colour. Any traces of colour in the sample produce a decrease in the number of photons detected in the photomultipliers and, therefore, this might cause a diminution in Cerenkov counting efficiency. It is essential not only to detect the effect of colour quenching in the sample but also to correct the decrease in counting efficiency. For this reason, colour quenching correction curves versus counting efficiency are usually done when measuring through Cerenkov counting. One of the most widely used techniques to evaluate colour quenching in these measurements is the channel ratio method, which consists of the measurement of the shift of the spectrum measuring the ratio of counts in two different windows. The selection of the windows for the application of the corrections might have an influence on the quality of the fitting parameters of the correction curves efficiency versus colour quenching degree and hence on the final 90Sr result. This work is focused on the calculation of the counting efficiency decrease using the channel ratio method and on obtaining the best fitting correction curve. For this purpose, empirical curves obtained through artificial quenchers have been studied and the results have been tested in real samples. Additionally, given that the Packard Tri-Carb 3170 TR/SL liquid scintillation counter is a novel detector for use in Cerenkov counting, the previous calibration of the Tri-Carb 3170 TR/SL detector, necessary for the measurement of 90Sr, is included.

In the SW of Spain, just in the confluence of the mouths of the Tinto and Odiel River and in the vicinity of Huelva town, there is a big industrial complex which includes between others an industry devoted during more than 40 years to the production of phosphoric acid, by treating sedimentary phosphate rock by the so-called "wet acid method". As a by-product of the mentioned process it have been produced historically huge amounts of a compound called phosphogypsum, which composition is mostly di-hydrate calcium sulphate containing some of the impurities of heavy metals and natural radionuclides originally present in the raw material. Due to the lack of market for this by-product, it has been mostly piled over some salt-marshes located in the vicinity of the industry, on the bank of the Tinto River. About 100 million tons of phosphogypsum have been piled in an area covering more than 1000 hectares, constituting a clear environmental and radiological anomaly in the zone. The...