Colloidal Suspension

We study the formation and growth of equilibrium clusters in a suspension of weakly-charged colloidal particles and small non-adsorbing polymers. The effective potential is characterised by a short-range attraction and a long-range repulsion. The size, shape and local structure of the clusters are studied using three-dimensional particle microscopy. We observe a rapid growth in the mean cluster size and the average number of nearest neighbours approaching the gel boundary.

The objective of this work was to find a rapid, high-yield process to obtain an aqueous stable colloid suspension of cellulose nanocrystals/whiskers. Large quantities are required since these whiskers are designed to be extruded into polymers in the production of nano-biocomposites. Microcrystalline cellulose (MCC), derived from Norway spruce (Picea abies), was used as the starting material. The processing parameters have been optimized by using response surface methodology. The factors that varied during the process were the concentration of MCC and sulfuric acid, the hydrolysis time and temperature, and the ultrasonic treatment time. Responses measured were the median size of the cellulose particles/whiskers and yield. The surface charge as calculated from conductometric titration, microscopic examinations (optical and transmission electron microscopy), and observation of birefringence were also investigated in order to determine the outcome (efficiency) of the process. With a sulfuric acid concentration of 63.5% (w/w), it was possible to obtain cellulose nanocrystals/whiskers with a length between 200 and 400 nm and a width less than 10 nm in approximately 2 h with a yield of 30% (of initial weight).

The objective of this work has been to combine the sol-gel method and the electrophoretic deposition (EPD) process to prepare thick coatings onto metallic substrates. Two different routes were used for preparing the sol-gel silica suspensions. On one hand, silica particulate sols were obtained by basic catalysis of alkoxides and alkylalkoxides. On the other, silica suspensions were prepared by adding a commercial colloidal silica sol to an organic-inorganic acid catalysed silica sol. The properties of the suspension and the physical parameters associated to EPD (current density, potential, electric field and deposition time) were studied. Crack-free deposits up to 20 μm were obtained after drying and crack-free glass-like coatings of 12 μm after sintering at 500°C for 30 minutes. The electrochemical behaviour of these coatings was evaluated by potentiodynamic methods, showing an excellent behaviour against corrosion.

The surprising recent discoveries of quasicrystals and their approximants in soft matter systems poses the intriguing possibility that these structures can be realized in a broad range of nano- and micro-scale assemblies. It has been theorized that soft matter quasicrystals and approximants are largely entropically stabilized, but the thermodynamic mechanism underlying their formation remains elusive. Here, we use computer simulation and free energy calculations to demonstrate a simple design heuristic for assembling quasicrystals and approximants in soft matter systems. Our study builds on previous simulation studies of the self-assembly of dodecagonal quasicrystals and approximants in minimal systems of spherical particles with complex, highly-specific interaction potentials. We demonstrate an alternative entropy-based approach for assembling dodecagonal quasicrystals and approximants based solely on particle functionalization and shape, thereby recasting the interaction-potential-based assembly strategy in terms of simpler-to-achieve bonded and excluded-volume interactions. Here, spherical building blocks are functionalized with mobile surface entities to encourage the formation of structures with low surface contact area, including non-close-packed and polytetrahedral structures. The building blocks also possess shape polydispersity, where a subset of the building blocks deviate from the ideal spherical shape, discouraging the formation of close-packed crystals. We show that three different model systems with both of these features -- mobile surface entities and shape polydispersity -- consistently assemble quasicrystals and/or approximants. We argue that this design strategy can be widely exploited to assemble quasicrystals and approximants on the nano- and micro- scales. In addition, our results further elucidate the formation of soft matter quasicrystals in experiment.

The influence of humic substances (HSs) upon the alkaline hydrolysis of crystal violet (CV) and malachite green (MG) has been studied. Important inhibition of hydrolysis reaction has been reported. This inhibition has been explained in terms of association of reactants to the humic substances. Kinetic results have been modelized using the micellar pseudophase model. Copyright © 2008 John Wiley & Sons, Ltd.