Oral and Maxillofacial Surgery

Long-term success of distraction osteogenesis depends on the ability of the surrounding soft tissues to tolerate distraction forces and to adapt to the resulting increase in skeletal length and volume. The hypothesis tested in this study was that mandibular elongation by distraction induces myocyte proliferation. Unilateral mandibular angle osteotomies were performed in 16 Yucatan minipigs. The hemimandibles were lengthened using semiburied distraction devices (Synthes Maxillofacial, Paoli, PA) with 0-day latency, 1, 2, or 4 mm/d distraction rates, and a neutral fixation period of twice the gap size in days. In 2 additional animals, the dissection and osteotomies were performed, and distraction devices were placed without activation (sham control). At the end of neutral fixation, tissues were taken from masseter muscle overlying the osteotomy and the equivalent region on the unoperated side (contralateral control). Proliferation of myocytes was estimated using immunohistochemical localization with antibodies against proliferating cell nuclear antigen (PCNA). Muscle overlying the distracted mandible showed 6-fold more PCNA-positive myocytes (16.8% +/- 11.3%) than the contralateral control side (2.8% +/- 1.1%, P < .0001). In the 2 sham-control animals, there was a low index of PCNA-positive myocytes on both the osteotomy (2%, 5%) and the contralateral sides (1%, 2%). The results of this study suggest that distraction of the porcine mandible by the protocol described induces myocyte proliferation in the masseter muscle. A proliferative response may contribute to improved long-term stability of mandibular expansion by distraction osteogenesis.

Osteonecrosis of the jaw (ONJ) is a serious complication associated with bisphosphonate therapy, but its epidemiology in the setting of oral bisphosphonate therapy is poorly understood. The present study examined the prevalence of ONJ in patients receiving chronic oral bisphosphonate therapy.We mailed a survey to 13,946 members who had received chronic oral bisphosphonate therapy as of 2006 within a large integrated health care delivery system in Northern California. Respondents who reported ONJ, exposed bone or gingival sores, moderate periodontal disease, persistent symptoms, or complications after dental procedures were invited for examination or to have their dental records reviewed. ONJ was defined as exposed bone (of >8 weeks' duration) in the maxillofacial region in the absence of previous radiotherapy.Of the 8,572 survey respondents (71 ± 9 years, 93% women), 2,159 (25%) reported pertinent dental symptoms. Of these 2,159 patients, 1,005 were examined and an additional 536 provided dental records. Nine ONJ cases were identified, representing a prevalence of 0.10% (95% confidence interval 0.05% to 0.20%) among the survey respondents. Of the 9 cases, 5 had occurred spontaneously (3 in palatal tori) and 4 occurred in previous extraction sites. An additional 3 patients had mandibular osteomyelitis (2 after extraction and 1 with implant failure) but without exposed bone. Finally, 7 other patients had bone exposure that did not fulfill the criteria for ONJ.ONJ occurred in 1 of 952 survey respondents with oral bisphosphonate exposure (minimum prevalence of 1 in 1,537 of the entire mailed cohort). A similar number had select features concerning for ONJ that did not meet the criteria. The results of the present study provide important data on the spectrum of jaw complications among patients with oral bisphosphonate exposure.

A 51-year-old woman was referred to us with the chief complaint of swelling and pain in the left preauricular region of 3 months' duration. Computed tomography showed a hypodense ovoid lesion causing erosion of the lateral aspect of the left condyle (Fig. 1). Fine-needle ...

In a 4-year period, 40 compact aluminum oxide ceramic implants fixed with titanium plates and screws were used: 24 for the correction of mandibular defects, 9 for temporomandibular joint replacement, and 7 for augmentation of facial contour. During the 1 to 4 years following the operations, it was not necessary to remove any aluminum oxide joint or implant used for contour correction. In 5 of the 24 cases of mandibular reconstruction, however, it was necessary to remove the ceramic. In 3 cases, this was due to recurrence of the tumor, and in 2 cases the cause was dermal necrosis.

Myospherulosis is a unique, inflammatory, granulomatous lesion, which results from the action of lipid substances on extravasated erythrocytes. Petrolatum-based antibiotic ointments are the most frequent etiologic agents of iatrogenically acquired lesions. Six intraoral cases of myospherulosis are presented, including the first reported case in oral soft tissues. The literature of reported cases is summarized and the epidemiology, histopathology, and ultrastructure of the lesions are discussed. Predisposing events and recommendations for future use of petrolatum-based antibiotic ointments are presented.

This study tested hyperbaric oxygen (HBO) as an adjunct to surgery and antibiotics in the treatment of bisphosphonate-related osteonecrosis of the jaw (ONJ) and evaluated its effects on gingival healing, pain, and quality of life. The investigators implemented a randomized controlled trial and enrolled a sample composed of patients with ONJ, where the predictor variable was HBO administered at 2 atm twice a day for 40 treatments as an adjunct to conventional therapy of surgery and antibiotics versus conventional therapy alone. Over the next 24 months, oral lesion size and number, pain, and quality of life were assessed. Forty-six patients (mean age, 66 yrs; 57% women) contributed data to the trial. There were no statistically significant differences in the distribution of variables used to assess randomization success between the HBO and standard treatment groups. Seventeen of 25 HBO-treated patients (68%) improved versus 8 of 21 controls (38.1%; P = .043, χ(2) test). Mean time to improvement was 39.7 weeks (95% confidence interval [CI], 22.4 to 57.0 weeks) for HBO-treated patients versus 67.9 weeks (95 CI, 48.4 to 87.5 weeks) for controls (P = .03, log-rank test). However, complete gingival healing occurred in only 14 of 25 HBO-treated patients (52%) versus 7 of 21 controls (33.3%; P = .203, χ(2) test), and time to healing was 59 weeks (95% CI, 42.8% to 75.8%) for HBO-treated patients versus 70 weeks (95 CI, 52.2% to 88.36%) for controls (P = .32, log-rank test). Pain decreased faster for HBO-treated subjects (P < .01, linear regression). Quality-of-life scores for physical health (P = .002) and perceived health (P = .043) decreased at 6 months for control group but for not the HBO group. ONJ is multifactorial and no single treatment modality is likely to reverse it; however, it is treatable and even advanced presentations can improve with intensive multimodal therapy. Clinically, HBO appears to be a useful adjunct to ONJ treatment, particularly for more severe cases, although this study was underpowered to fully support this claim.

Patient: A 61-year-old man with full thickness facial cheek defect due to a complication of tissue necrosis occured after surgicaland followed radiation therapy for basal cell carcinoma of the submental region required prosthetic rehabilitation. Apartfrom the aesthetic concern, he was suffering from other oral debilities such as difficulty in eating, speaking and swallowing. As this type of carcinoma may have a potential risk of morbidity and mortality, it is an obligation of a prosthodontist to treat the patient to have an acceptable and normal social life for his remaining lifespan. The defect was, therefore, prosthetically rehabilitated with a double-layered technique of maxillofacial prosthesis which simulated both intra- and extra-oral tissues. Cosmesil Silicone was used to prepare the epithesis extraorally. The prosthesis was then soft relined using DentuSil Silicone.. The connection of both materials was made with an arcrylic element in the mold.

Discussion: This resulted in practically good durability, placement, retention and adaptation of the denture both extraorallyand intraorally. The patient reported being satisfied with the function and aesthetics of the epithesis.

Conclusion: This simple alternative approach of a double layered techique may help to improve the aesthetic and functionin the reconstructions of patients with facial full thickness cheek defects.

Oral and Maxillofacial Surgeons have increasing opportunities to train in head and neck oncologic and reconstructive surgery. The development of a fellowship training programs within our speciality has had a transformative effect on the speciality. This survey by the commitee on Maxillofacial Oncology and Reconstructive is aimed to evaluate the impact of fellowship training on the careers of the fellows and speciality from 2005-2015.

RATIONALE AND OBJECTIVE
Three-dimensional (3D) printed anatomic models and surgical guides have been shown to reduce operative time. The purpose of this study was to generate an economic analysis of the cost-saving potential of 3D printed anatomic models and surgical guides in orthopedic and maxillofacial surgical applications.

MATERIALS AND METHODS
A targeted literature search identified operating room cost-per-minute and studies that quantified time saved using 3D printed constructs. Studies that reported operative time differences due to 3D printed anatomic models or surgical guides were reviewed and cataloged. A mean of $62 per operating room minute (range of $22–$133 per minute) was used as the reference standard for operating room time cost. Different financial scenarios were modeled with the provided cost-per-minute of operating room time (using high, mean, and low values) and mean time saved using 3D printed constructs.

RESULTS
Seven studies using 3D printed anatomic models in surgical care demonstrated a mean 62 minutes ($3720/case saved from reduced time) of time saved, and 25 studies of 3D printed surgical guides demonstrated a mean 23 minutes time saved ($1488/case saved from reduced time). An estimated 63 models or guides per year (or 1.2/week) were predicted to be the minimum number to breakeven and account for annual fixed costs.

CONCLUSION
Based on the literature-based financial analyses, medical 3D printing appears to reduce operating room costs secondary to shortening procedure times. While resource-intensive, 3D printed constructs used in patients’ operative care provides considerable downstream value to health systems.

This study is an anatomical study designed to benefit surgeons working in the region of the maxillary sinus. This paper investigates ethnic and gender variations in the shape of the maxillary sinus in dried crania from the Raymond Dart collection of human skeletons. The paper claims that an estimate of the area of the medial antral wall of the maxillary sinus is one of the best ethnic/gender group predictors. Helical, multislice computed tomography was performed using 1mm coronal slices length, depth, width and volume measurements for each sinus were taken. Classification by shape and estimated area of medial wall was attempted. Shape classification was found to be unsuccessful whilst medial wall classification into ethnic/gender groupings gave encouraging results. The area of the medial wall is related to ethnic/gender groups.

O processo de construção de protótipos biomédicos surgiu da união das tecnologias de prototipagem rápida e do diagnóstico por imagens. No entanto, este processo é complexo, em função da necessária interação entre as ciências biomédicas e a engenharia. Para que bons resultados sejam obtidos, especial atenção deve ser dispensada à aquisição das imagens por tomografia computadorizada e à manipulação dessas imagens em softwares específicos. Este artigo apresenta a experiência multidisciplinar de um grupo de pesquisadores com a aquisição e a manipulação de imagens por tomografia computadorizada do complexo maxilofacial, visando à construção de protótipos biomédicos com finalidade cirúrgica.