Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
21 views

Computer Integrated Manufacturing A&B: B.E./ B.Tech Degree Examination, Sep - 2013

This document appears to be an exam for a 7th semester mechanical engineering degree course on Computer Integrated Manufacturing (CIM). The exam contains two parts: Part A has 5 short answer questions worth 2 marks each (10 marks total) related to CIM topics like process planning, coding systems, shop floor control terminology. Part B contains 3 longer answer questions worth 16, 16, and 8 marks respectively related to CIM communications, computer-aided process planning methods, and shop floor control techniques. The exam is out of a maximum of 50 marks and was administered on September 28, 2011.

Uploaded by

saisenth
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
21 views

Computer Integrated Manufacturing A&B: B.E./ B.Tech Degree Examination, Sep - 2013

This document appears to be an exam for a 7th semester mechanical engineering degree course on Computer Integrated Manufacturing (CIM). The exam contains two parts: Part A has 5 short answer questions worth 2 marks each (10 marks total) related to CIM topics like process planning, coding systems, shop floor control terminology. Part B contains 3 longer answer questions worth 16, 16, and 8 marks respectively related to CIM communications, computer-aided process planning methods, and shop floor control techniques. The exam is out of a maximum of 50 marks and was administered on September 28, 2011.

Uploaded by

saisenth
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

B.E./ B.

Tech DEGREE EXAMINATION, SEP - 2013


Cycle IV

Unit Test IV

VII th Semester

Department of Mechanical Engineering

708MET03 COMPUTER INTEGRATED MANUFACTURING A&B

28.09.2k11 Answer ALL Questions PART A (5 x 2 = 10 marks)

Maximum: 50 marks

1. What is MAP? 2. Compare manual and computer aided process planning 3. Mention any four GT coding systems 4. Define the term SFC in CIM 5. Why parts to be identified automatically in CIM factories?

PART B (2 x 16 + 1 x 8 = 40 marks)

6. Discuss the different types of communications in CIM

(16)

7. With suitable diagrams explain Generative and Variant CAPP methods

(16)

8. Discuss the three phases of shop floor control techniques and applications

(8)

Dr K Balagurunathan Advisor

Dr PV Senthiil HEAD/MECH

You might also like