Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
35 views3 pages

ميمصتلا ةقيرط = ةنرملا ةقيرطلا N = 28.85 ton Sl = 2 kg/cm2 حومسملا دشلا داهجإ ,

Uploaded by

Kamel Jamal Besharah

1) The document presents the design calculations for a foundation using the flexible design method. 2) The required rebar areas are calculated based on bending moment and shear capacity requirements. 3) The minimum and maximum reinforcement ratios are checked to ensure the calculated rebar areas satisfy design limits.

Copyright:

Attribution Non-Commercial (BY-NC)
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

ميمصتلا ةقيرط = ةنرملا ةقيرطلا N = 28.85 ton Sl = 2 kg/cm2 حومسملا دشلا داهجإ ,

Uploaded by

Kamel Jamal Besharah
35 views3 pages
1) The document presents the design calculations for a foundation using the flexible design method. 2) The required rebar areas are calculated based on bending moment and shear capacity requirements. 3) The minimum and maximum reinforcement ratios are checked to ensure the calculated rebar areas satisfy design limits.

Original Title

A-1 footing

Copyright

© Attribution Non-Commercial (BY-NC)

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

1) The document presents the design calculations for a foundation using the flexible design method. 2) The required rebar areas are calculated based on bending moment and shear capacity requirements. 3) The minimum and maximum reinforcement ratios are checked to ensure the calculated rebar areas satisfy design limits.

Copyright:

Attribution Non-Commercial (BY-NC)
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
35 views3 pages

ميمصتلا ةقيرط = ةنرملا ةقيرطلا N = 28.85 ton Sl = 2 kg/cm2 حومسملا دشلا داهجإ ,

Uploaded by

Kamel Jamal Besharah
1) The document presents the design calculations for a foundation using the flexible design method. 2) The required rebar areas are calculated based on bending moment and shear capacity requirements. 3) The minimum and maximum reinforcement ratios are checked to ensure the calculated rebar areas satisfy design limits.

Copyright:

Attribution Non-Commercial (BY-NC)
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 3

7

A-1 5

=
N = 28.85 ton
Sl = 2 kg/cm2
, t = -1 kg/cm2

ac = 40 cm , bc = 30 cm , fy = 4200 kg/cm2 , fc = 300 kg/cm2


S = 1.1 * N * 1000 / sl = 15867 cm2
C =0.25 *(sqr((ac + bc) ^ 2 + 4 * (S - (ac * bc))) - (ac + bc)) =45.917 cm
C = 45 cm

Ly = ac + 2 * c = 130 cm
Lx = bc + 2 * c = 120 cm
Ly = ac + 2 * c = 130 cm
Lx = bc + 2 * c = 120 cm

S = Lx * Ly = 15600 cm2
n = N * 1000 / S = 1.85 kg/cm2
H => Max { 25 cm , c / 2 = 22.5 cm
H = 40 cm
d = H - 5 = 35 cm
Q = N * 1000 - n * ((ac + d) * (bc + d)) = 20340 kg
bo = 2 * (ac + d) + 2 * (bc + d) = 280 cm
T = Q / (bo * 0.85 * d) = 2.44 kg/cm2
T < 0.4 * sqrt(fc) = 6.93 , ok

My = n * Lx * Cy ^ 2 / 2 = 1.042 * 120 * 50^2 / 2 = 429546.3 kg.cm


Mx = n * Ly * Cx ^ 2 / 2 = 1.042 * 160 * 50^2 / 2 = 157952.1 kg.cm

h = 40 - 5 = 35 cm
, min = 0.001
max = 0.5 * ((4550 / (6300 + fy)) * (fc / fy)) = 0.0155
s = 4200 * 0.55 = 2310 kg/cm2
c = 300 * 0.45 = 135 kg/cm2
= 15 / (15 + (s / c)) = 0.46713
e = 1 - ( / 3) = 0.844
= sqr(2 / ( * e * c)) = 0.19381
hx = * sqr(mx / ly) = 6.4678 cm
hy = * sqr(my / lx) = 12.012 cm
h > hx & h > hy , ok

Asx = mx / (e * h * s) = 2.3139 cm2


Asy = my / (e * h * s) = 6.2927 cm2
x = Asx / (ly * h) = 0.00047
y = Asy / (ly * h) = 0.00161
min > 1.33 * x , min = 1.33 * x = 0.000625
x < min , x = min = 0.000625
x < max & x > min , ok
min > 1.33 * y , min = 1.33 * y = 0.00214
y < max & y > min , ok
Asx = x * ly * h = 4.96 cm2
Asy = y * lx * h = 6.29 cm2

Asx = 4.96 cm2 = 6T12 mm = 6.78 cm2


Asy = 6.29 cm2 = 7T12 mm = 7.91 cm2
Asx = 6T12 mm , ok
Asy = 7T12 mm , ok

You might also like