Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 122 views

    498 Plate Girder Combined

    Uploaded by

    apooladi
    This document summarizes the design check calculations for the shear and bending moment capacities of a plate girder. Key inputs include the member geometry, material properties, and factored shear and moment loads. The calculations determine the bending moment resistance considering shear-moment interaction. Separate checks are also performed for shear capacity and the combined shear-moment effect. The results indicate the girder passes both the individual moment and shear checks as well as the combined check.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    498 Plate Girder Combined

    Uploaded by

    apooladi
    122 views1 page
    This document summarizes the design check calculations for the shear and bending moment capacities of a plate girder. Key inputs include the member geometry, material properties, and factored shear and moment loads. The calculations determine the bending moment resistance considering shear-moment interaction. Separate checks are also performed for shear capacity and the combined shear-moment effect. The results indicate the girder passes both the individual moment and shear checks as well as the combined check.

    Original Description:

    498 Plate Girder Combined

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design check calculations for the shear and bending moment capacities of a plate girder. Key inputs include the member geometry, material properties, and factored shear and moment loads. The calculations determine the bending moment resistance considering shear-moment interaction. Separate checks are also performed for shear capacity and the combined shear-moment effect. The results indicate the girder passes both the individual moment and shear checks as well as the combined check.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    122 views1 page

    498 Plate Girder Combined

    Uploaded by

    apooladi
    This document summarizes the design check calculations for the shear and bending moment capacities of a plate girder. Key inputs include the member geometry, material properties, and factored shear and moment loads. The calculations determine the bending moment resistance considering shear-moment interaction. Separate checks are also performed for shear capacity and the combined shear-moment effect. The results indicate the girder passes both the individual moment and shear checks as well as the combined check.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    REPORT

    TITLE
    FILE

    Plate Girder Design


    Sample Design Check for Moment & Shear Combined
    combined_check.xls

    SECTION
    DATE
    TIME

    5.0
    4/17/2014
    1:39 AM

    CHECK FOR SHEAR AND MOMENT COMBINATION

    REFERENCE

    INPUT
    Performance Factor
    Web Height
    Web Thickness
    Flange Width
    Flange Thickness
    Material Yield Strength
    Transverse Stiffener Distance
    Stiffeners
    Factored Shear
    Factored Moment

    Phi
    h
    w
    b
    t
    Fy
    a
    stiffeners
    Vf
    Mf

    =
    =
    =
    =
    =
    =
    =
    = (No stiffeners = 0; Stiffeners =1)
    =
    =

    Web Area
    Flange Area
    Overall Girder Depth
    Elastic Section Modulus

    Aw
    Af
    d
    S

    =
    =
    =
    =

    Moment Resistances:
    Basic Moment Resistance
    Red. Moment Resistance

    Mr_basic
    Mr'

    = Phi * S * Fy / 1000000
    =
    = Mr_basic*(1-(0.0005*Aw/Af)*((h/w)-(1900/(Mf*1000000/(Phi*S))^0.5)))
    =

    0.90
    1400.00
    9.10
    540.00
    25.40
    350.00
    3000.00
    1.00
    750.00
    4000.00

    [mm]
    [mm]
    [mm]
    [mm]
    [Mpa]
    [mm]
    [kN]
    [kN*m]

    OUTPUT
    MOMENT CHECK
    h*w
    b*t
    h + 2*t
    (1/(6*d))*((b*d^3)-(b-w)*(d-2*t)^3)

    =
    =
    =
    =

    To Select Which Moment to Use, Obtain Ratios:


    Actual Width Thickness Ratio hw_ratio
    = h/w
    Max Width Thickness Ratio
    max_hw_ratio = 1900/(sqrt(Mf/(Phi*S))*sqrt(1000000))

    =
    =

    Moment Resistance

    Mr

    Moment Check

    = IF(hw_ratio>max_hw_ratio,Mr',Mr_basic)
    IF(Mf/Mr<=1,"Ok","Not Ok")

    12740.00
    13716.00
    1450.80
    2.21E+07

    [mm^2]
    [mm^2]
    [mm]
    [mm^3]

    6955 [kN*m]
    6891 [kN*m]

    154
    134
    6891 [kN*m]

    Ok

    153.85

    = IF(stiffeners = 0,5.34,IF(a/h < 1,4 + (5.34/(a/h)^2),5.34 + 4/ (a/h)^2))=

    6.21

    HSC 7-59

    $13.5(b)
    $15.4

    $11.2 Table 1
    $15.4
    $13.4.1.4

    SHEAR CHECK
    Web Slenderness

    Sl_w

    Calculation of Shear Stress Resistance:


    Shear Buckling Coefficient
    kv
    Ultimate Shear Stress (Fs)
    Shear Stress (a)
    Shear Yielding
    Fs_a
    Shear Stress (b)
    Inelastic Buckling
    Fs_b
    Shear Stress (c)
    Tension Field
    Fs_c
    Shear Stress (d)
    Elastic Buckling
    Fs_d
    K Factor
    KF

    = h/w

    = 0.66 * Fy

    231.00 [Mpa]

    $13.4.1.1(a)

    87.89 [Mpa]

    $13.4.1.1(b)

    129.71 [Mpa]

    $13.4.1.1(c)

    =
    =

    103.94 [Mpa]
    0.13

    $13.4.1.1(d)

    103.94 [Mpa]

    $13.4.1.1 (a-d)

    1192 [kN]

    Shear Stress

    Fs

    = 290 * (((Fy * kv)^.5)/(h / w))


    IF(stiffeners = 0, Fs_b, Fs_b + (0.5 * Fy = 0.866*Fs_b)*(1/(1+(a/h)^2)^0.5))
    IF(stiffeners = 0, 180000* kv / (h/w)^2, 180000* kv / (h/w)^2 + (0.5
    = * Fy - 0.866*(180000* kv / (h/w)^2))*(1/(1+(a/h)^2)^0.5))
    = (kv/Fy)^0.5
    IF(Sl_w<=439*KF,Fs_a,IF(Sl_w<=502*KF,Fs_b,IF(Sl_w<=621*KF,
    = Fs_c,Fs_d)))

    Shear resistance

    Vr

    = Phi * Aw * Fs / 1000

    Shear Check

    $13.4.1.1

    $13.4.1.1

    IF(Vf/Vr<=1,"Ok","Not Ok")

    Ok

    $13.4.1.4

    IF(0.727*(Mf/Mr)+0.455*(Vf/Vr)<=1,"OK","NOT OK")

    OK

    $13.4.1.4

    COMBINED CHECK
    COMBINED CHECK

    You might also like