Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 127 views

    RC Corbel Designer

    Uploaded by

    Hari Amudhan Ilanchezhian
    This document summarizes the design of a reinforced concrete corbel column C113,C117 for the Marymount Centre. Key details include: - Concrete strength of 35 MPa, rebar strength of 460 MPa - Vertical load of 213 kN, horizontal load of 106.5 kN - Corbel width of 282.84 mm, vertical load point 150 mm from face - Minimum bearing stress of 28 MPa, bearing plate width of 150 mm - Corbel length of 375 mm, depth of 500 mm - Shear and reinforcement checks show the design meets requirements for strength and serviceability.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    RC Corbel Designer

    Uploaded by

    Hari Amudhan Ilanchezhian
    127 views1 page
    This document summarizes the design of a reinforced concrete corbel column C113,C117 for the Marymount Centre. Key details include: - Concrete strength of 35 MPa, rebar strength of 460 MPa - Vertical load of 213 kN, horizontal load of 106.5 kN - Corbel width of 282.84 mm, vertical load point 150 mm from face - Minimum bearing stress of 28 MPa, bearing plate width of 150 mm - Corbel length of 375 mm, depth of 500 mm - Shear and reinforcement checks show the design meets requirements for strength and serviceability.

    Original Description:

    RC CORBEL DESIGN BASED ON BS CODE

    Original Title

    RC CORBEL DESIGNER

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a reinforced concrete corbel column C113,C117 for the Marymount Centre. Key details include: - Concrete strength of 35 MPa, rebar strength of 460 MPa - Vertical load of 213 kN, horizontal load of 106.5 kN - Corbel width of 282.84 mm, vertical load point 150 mm from face - Minimum bearing stress of 28 MPa, bearing plate width of 150 mm - Corbel length of 375 mm, depth of 500 mm - Shear and reinforcement checks show the design meets requirements for strength and serviceability.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    127 views1 page

    RC Corbel Designer

    Uploaded by

    Hari Amudhan Ilanchezhian
    This document summarizes the design of a reinforced concrete corbel column C113,C117 for the Marymount Centre. Key details include: - Concrete strength of 35 MPa, rebar strength of 460 MPa - Vertical load of 213 kN, horizontal load of 106.5 kN - Corbel width of 282.84 mm, vertical load point 150 mm from face - Minimum bearing stress of 28 MPa, bearing plate width of 150 mm - Corbel length of 375 mm, depth of 500 mm - Shear and reinforcement checks show the design meets requirements for strength and serviceability.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 1

    RC Corbel Design

    Project Name Marymount Centre Column C113,C117


    Date Storey 3
    General Details
    Strength of Concrete,fcu = 35 N/mm
    Strength of Steel,fy = 460 N/mm
    Minimum cover to the Reinf. = 30 mm
    Dia. Of Reinf for Corbel = 20 mm (Assume dia = 20 mm minimum)
    Dia. Of the Hori.links = 10 mm (Assume dia = 10 mm minimum)
    Load Details
    Vertical Load, V = 213 kN
    Horizontal load,H = 106.5 kN (if unknown use 50% of the vertical load)
    Corbel Dimension Details
    Width of the Corbel (column) = 282.84 mm
    Point of Vertical Load,av = 150 mm (from the face of the column)
    Bearing Plate Details
    Minimum Bearing Stress = 28 N/mm
    Bearing Plate Width,bp = 150 mm
    Min. Bearing Plate length,lp = 50.714286 mm (Required)
    Bearing Plate length,lp = 150 mm (Provided)
    Length of the corbel,lc = 375 mm
    Depth of the corbel,h = 500 mm (Generally increase the depth by 150mm)
    Max. Allowable shear stress @ face of the column
    = 4.7328638 N/mm
    Effective depth of corbel,dreq = 159.11633 mm
    Effective depth provided,dprov = 450 mm
    Max. Shear Stress in concc,nc = 1.6735021 N/mm
    Parameters for Z/d
    n/fcu = 0.0478143
    av/d = 0.3333333
    Z/d = 0.9 (From attached chart)
    Z = 405 mm
    Ft = 185.38889 kN
    Main Reinforcement, As req = 532.23388 mm
    No of Re-bars Provided = 2
    Dia of Re-bar, = 20 mm
    Main Reinforcement, As prov = 628 mm
    Shear Check
    % of Reinf Provided,p = 0.4934081 Shear Link based on the calculations (if required)
    Stress in concrete,n = 0.5310125 N/mm Dia of the link = 10 mm
    Modified Shear Stress,n'c = 3.1860747 N/mm No of legs provided = 2 nos
    Nominal Shear links have to be provided Area Provided, Ash = 157.143 mm
    Spacing provided = 100 mm Spacing, Sh (required) = -146.999 mm
    Provide the above spacing upto 2/3d from top of the corbel
    (2/3)d = 300 mm
    Area of legs provided = 471.42857 mm
    Spacing provided is O.K.
    Bearing Stress check inside bend
    Tensile Force in Re-bar @ start = 78.559115 kN C/C = 163 mm
    of Bend, Fbt Clear cover = 60 mm
    Ult. anchorage bond stress,fbu = 2.9580399 N/mm Re-bar dia = 20 mm
    (Based on Table3.26 of BS8110)
    Anchorage bond length required = 422.5109 mm
    Tension in Bar @ start of bend = 52.372743 kN
    Internal radius of bar,r = 100 mm
    ab = 80 mm
    Bearing Stress,(Fbt/r) = 39.279557 N/mm
    (2fcu/(1+(2/ab)) = 46.666667 N/mm
    Bearing stress is O.K.
    Anchorage Details are however checked with the standard Tension and Compresion anchorages.
    3/25/2013

    You might also like