Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 33 views

    Asce7 05 Earthquake F 7310 Sand Surge Hopper

    Uploaded by

    DeepmalaJayesh
    This document provides the seismic force calculations for a 13,000 lb sand surge hopper located at a height of 75.5 feet at a facility in Hamilton, MS. The calculations determine the seismic design category is C based on the site data and determines the component horizontal seismic force is 4,868 lbs and vertical seismic force is 778 lbs based on the IBC 2006 and ASCE 7-05 specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Asce7 05 Earthquake F 7310 Sand Surge Hopper

    Uploaded by

    DeepmalaJayesh
    33 views1 page
    This document provides the seismic force calculations for a 13,000 lb sand surge hopper located at a height of 75.5 feet at a facility in Hamilton, MS. The calculations determine the seismic design category is C based on the site data and determines the component horizontal seismic force is 4,868 lbs and vertical seismic force is 778 lbs based on the IBC 2006 and ASCE 7-05 specifications.

    Original Description:

    SURGE

    Original Title

    Asce7 05 Earthquake f 7310 Sand Surge Hopper

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides the seismic force calculations for a 13,000 lb sand surge hopper located at a height of 75.5 feet at a facility in Hamilton, MS. The calculations determine the seismic design category is C based on the site data and determines the component horizontal seismic force is 4,868 lbs and vertical seismic force is 778 lbs based on the IBC 2006 and ASCE 7-05 specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    33 views1 page

    Asce7 05 Earthquake F 7310 Sand Surge Hopper

    Uploaded by

    DeepmalaJayesh
    This document provides the seismic force calculations for a 13,000 lb sand surge hopper located at a height of 75.5 feet at a facility in Hamilton, MS. The calculations determine the seismic design category is C based on the site data and determines the component horizontal seismic force is 4,868 lbs and vertical seismic force is 778 lbs based on the IBC 2006 and ASCE 7-05 specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    "IBC2006E.

    xls" Program
    Version 1.2

    SEISMIC FORCE FOR COMPONENTS


    Per IBC 2006 and ASCE 7-05 Specifications
    For Mechanical and Electrical Components
    Job Name: TRONOX, HAMILTON, MS
    Subject: F-7310 SAND SURGE HOPPER
    Job Number: 07LV9840
    Originator: DJM
    Checker:
    Input Data:
    Occupancy Category =
    Soil Site Class =
    Location Zip Code =
    Spectral Accel., SS =
    Spectral Accel., S1 =
    Average Roof Height, h =
    Height of attachment, z =
    Importance Factor, Ip =
    Component Weight, W p =
    Component Type =

    III
    D
    39746
    0.286
    0.112
    75.570
    75.570
    1.25
    13000.00
    1i

    IBC 2006, Table 1604.5, page 281


    IBC 2006 Table 1613.5.2, page 303
    ASCE 7-05 Figures 22-1 to 22-14
    ASCE 7-05 Figures 22-2 to 22-14

    (As per Design Criteria)


    (As per Design Criteria)

    ft.
    ft.

    ASCE 7-05 Section 13.1.3, page 143


    (As per Design Criteria)
    ASCE 7-05 Section 13.3.1, page 144
    Roof-mounted chimneys, stacks, cooling and electrical towers laterally
    braced below their center of mass (ASCE 7-05 Table 13.6-1)

    lbs.,

    Results:
    Site Coefficients:
    Fa =
    Fv =

    1.571
    2.352

    IBC 2006 Table 1613.5.3(1), page 304


    IBC 2006 Table 1613.5.3(2), page 304

    Maximum Spectral Response Accelerations for Short and 1-Second Periods:


    SMS =
    0.449
    SMS = Fa*SS, IBC 2006 Eqn. 16-37, page 303
    SM1 =
    0.263
    SM1 = Fv*S1, IBC 2006 Eqn. 16-38, page 303
    Design Spectral Response Accelerations for Short and 1-Second Periods :
    SDS =
    0.300
    SDS = 2*SMS/3, IBC 2006 Eqn. 16-39, page 304
    0.176
    SD1 = 2*SM1/3, IBC 2006 Eqn. 16-40, page 304
    SD1 =
    Seismic Design Category:
    Category(for SDS) =
    Category(for SD1) =
    Use Category =

    B
    C
    C

    IBC 2006 Table 1613.5.6(1), page 306


    IBC 2006 Table 1613.5.6(2), page 306
    Most critical of either category case above controls

    Amplification Factor and Response Modification Coefficient:


    Amplification Factor, ap =
    2.50
    ASCE 7-05 Table 13.5-1, page 146
    Resp. Mod. Coef., Rp =
    3.00
    ASCE 7-05 Table 13.5-1, page 146
    Component Seismic Force:
    Fph =
    Fph(max) =
    Fph(min) =
    Use: Fph =

    4868.10
    7788.96
    1460.43
    4868.10

    Component Vertical Seismic Force:


    Fpv =
    778.90

    lbs.,

    Fph = (0.4*ap*SDS*W p)*(1+2*z/h)/(Rp/Ip), Eqn. 13.3-1, page 144


    Fph = 1.6*SDS*Ip*W p, ASCE 7-05 Eqn. 13.3-2, page 144
    lbs., Fph = 0.3*SDS*Ip*W p, ASCE 7-05 Eqn. 13.3-3, page 144
    lbs. Note: Fph is to be applied independently in both transverse
    and longitudinal directions relative to seismic restraint.
    lbs.,

    lbs.,

    Fpv = 0.2*SDS*W p, ASCE 7-05 Eqn. 12.4-4, page 126

    Comments:

    1 of 1

    9/25/2012 6:18 PM

    You might also like