Lufkin Mark II
Lufkin Mark II
Lufkin Mark II
PUMPING UNITS
The Mark II Pumping Unit, due to its unique geometry and phased counterbalance feature, lowers peak torque and horsepower requirements. The
unusual geometry of the Mark II produces a somewhat slower up stroke and
faster down stroke with reduced acceleration where the load is greatest,
resulting in lower peak loads and longer rod life.
The Mark II's unique UNITORQUE geometry is characterized by three (3) basic configurations which
reduce the rod load and peak torque over that of a
conventional pumping unit. The design characteristics
which make the Mark II unique are:
Shifting the gearbox from directly under the
equalizer towards the Samson post turning in a
preferred direction of rotation, creates an upstroke
that occurs in approximately 195 of crank rotation and a downstroke of approximately 165 of
crank rotation.
Placing the equalizer between the horsehead and
the Samson post creates a push-up or Class 3
lever system.
The 195 upstroke, coupled with the front mounted geometry, reduces the acceleration at the
beginning of the upstroke where the load is greatest, thereby effecting a reduction in polished rod
load. Locating the cross-yoke forward of the gear
reducer creates a greater mechanical advantage
for lifting the heavy load on the upstroke, and a
lesser mechanical advantage for the reduced
downstroke load (i.e., the maximum upstroke
torque factor is reduced while the maximum
downstroke torque factor is increased).
An angular offset in the crank that produces a
more effective counterbalance torque which at
the beginning of the upstroke lags the well load
torque approximately 712. Similarly, at the beginning of the downstroke, this same offset condition
produces a counter balance torque which leads
the well load torque approximately 712.
Independently these features would not produce a
relatively uniform torque, but working together a
unitorque system is obtained which can reduce
the torque on the gearbox up to 35% as well as
lowering power costs and often, prime mover size.
12
MARK II UNITORQUE
PUMPING UNITS
T
0
7-1/2
180
180
195 Upstroke
C'bal. torque lags
well load torque
360
7-1/2
165 Upstroke
C'bal. torque leads
well load torque
Two-Point Suspension bases are standard for all Lufkin Mark II Pumping
Units. The two-point base permits the use of small salvageable precast concrete
blocks or fabricated foundation pads under the front and rear of the unit. Precast
concrete blocks reduce concrete requirements by approximately 80%. This simple base suspension/foundation design significantly reduces installation time.
MARK II UNITORQUE
PUMPING UNITS
B
A
DRIVE
C
V
MAX.
MIN.
T
D
MULTI
CYLINDER
ENGINE
AE
BOTTOM OF STROKE
AG
AB
J
L
N
W
E
R
Dimensional Data
Unit Size
M-1824D-427-216
M-1280D-427-216
M-1280D-427-192
M-912DS-365-216
M-912DS-427-192
M-912DS-427-168
M-912D-305-216
M-912D-305-192
M-912D-365-168
M-912D-305-168
M-912D-365-144
M-912D-305-144
M-640D-305-192
M-640D-365-168
M-640D-305-168
M-640D-365-144
M-640D-305-144
M-640D-256-144
M-640D-305-120
M-456D-305-192
M-456D-305-168
M-456D-365-144
M-456D-305-144
M-456D-256-144
M-456D-365-120
M-456D-305-120
M-456D-256-120
(inches)
306
306
306
306
306
270
306
306
270
270
258
258
306
270
270
258
258
258
258
306
270
258
258
258
258
258
258
384
384
384
384
384
334
384
384
334
334
312
312
384
334
334
312
312
312
312
384
334
312
312
312
312
312
312
329.88
329.88
329.88
329.88
329.88
276.88
329.88
329.88
276.88
276.88
252.88
252.88
329.88
276.88
276.88
252.88
252.88
252.88
252.88
329.88
276.88
252.88
252.88
252.88
252.88
252.88
252.88
55
55
55
55
55
50
55
55
50
50
50
50
55
50
50
50
50
50
50
55
50
50
50
50
50
50
50
223.00
223.00
223.00
223.00
223.00
218.75
223.00
223.00
218.75
218.75
218.75
218.75
223.00
218.75
218.75
218.75
218.75
218.75
218.75
223.00
218.75
218.75
218.75
218.75
218.75
218.75
218.75
333.75
341.50
341.50
331.50
331.50
298.25
326.50
326.50
298.25
298.25
298.25
298.25
326.50
298.25
298.25
298.25
298.25
298.25
298.25
326.50
298.25
298.25
298.25
298.25
298.25
298.25
298.25
67.00
57.25
57.25
53.63
53.63
53.63
53.63
53.63
53.63
53.63
53.63
53.63
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
49.88
569
569
550
569
550
477
569
550
471
471
426
426
550
471
471
426
426
422
399
550
471
426
426
434
399
399
400
44.38
44.38
63.25
44.38
63.25
32.38
44.38
63.25
40.25
40.25
33.63
33.63
63.25
40.25
40.25
33.63
33.63
47.25
59.75
63.25
40.25
33.63
33.63
47.50
59.75
59.75
73.88
130
130
130
130
130
108
130
130
108
108
108
108
130
108
108
108
108
108
108
130
108
108
108
108
108
108
108
25.38
31.75
31.75
23.00
23.00
25.50
23.00
23.00
25.50
25.50
25.50
25.50
26.63
24.13
24.13
24.13
24.13
24.13
24.13
29.75
31.00
31.00
31.00
31.00
31.00
31.00
31.00
AB
AE
AG
48.50
48.50
48.50
48.50
48.50
50.00
48.50
48.50
50.00
50.00
50.00
50.00
48.50
50.00
50.00
50.00
50.00
50.00
50.00
48.50
50.00
50.00
50.00
50.00
50.00
50.00
50.00
124.00
114.00
114.00
107.00
107.00
107.00
109.00
109.00
105.00
105.00
105.00
103.38
105.00
101.00
101.00
101.00
99.38
99.38
99.38
105.00
101.00
101.00
99.38
99.38
101.00
99.50
99.50
108.50
108.50
108.50
108.50
108.50
114.38
108.50
108.50
90.38
90.38
90.38
90.38
108.50
90.38
90.38
90.38
90.38
90.38
90.38
108.50
90.38
90.38
90.38
90.38
90.38
90.38
90.38
26.00
26.00
26.00
26.00
26.00
23.38
26.00
26.00
23.38
23.38
18.00
18.00
26.00
23.38
23.38
18.00
18.00
18.00
18.00
26.00
23.38
18.00
18.00
18.00
18.00
18.00
18.00
51
51
51
59
59
46
59
59
46
46
46
46
60
46
46
46
46
46
46
60
46
46
46
46
46
46
46
NOTE: Do not use the above dimensions for foundation. Request a foundation plan.
The above units are designed to be installed on "two point" foundations.
Standard API models shown, other models available on request.
13
MAX.
MIN.
MARK II UNITORQUE
PUMPING UNITS
T
B
A
AG
INSIDE OF
AUX. WT.
I
V
MAX.
MULTI
CYLINDER
ENGINE
MIN.
MAX.
MIN.
UU
VV
DRIVE
MULTI
CYLINDER
ENGINE
MIN.
AE
BOTTOM OF STROKE
AB
AA
J
L
N
W
M
X
E
R
Dimensional Data
Unit Size*
M-320D-256-144
M-320D-305-120
M-320D-256-120
M-320D-213-120
M-320D-305-100
M-320D-256-100
M-228D-256-120
M-228D-213-120
M-228D-256-100
M-228D-173-100
M-228D-246-86
M-228D-213-86
M-228D-200-74
M-228D-173-74
M-160D-213-86
M-160D-173-86
M-160D-200-74
M-160D-173-74
M-114D-143-86
M-114D-173-74
M-114D-143-74
M-114D-173-64
M-114D-143-64
(inches)
258
258
258
258
258
258
258
258
258
258
186
186
186
186
186
186
186
186
162
186
162
162
162
312
312
312
312
312
312
312
312
312
312
222
222
222
222
222
222
222
222
189
222
189
189
189
252.88
252.88
252.88
252.88
252.88
252.88
252.88
252.88
252.88
252.88
188.38
188.38
188.38
188.38
188.38
188.38
188.38
188.38
147.50
188.38
147.50
147.50
147.50
33.25
33.25
33.25
33.25
33.25
33.25
28.75
28.75
28.75
28.75
29.25
29.25
29.25
29.25
33.75
33.75
33.75
30.00
30.00
30.75
30.00
30.00
30.00
258.38
258.38
258.38
258.38
258.38
258.38
258.38
258.38
258.38
258.38
188.00
187.63
187.63
187.63
187.63
187.63
187.63
187.63
161.00
188.38
161.00
161.00
161.00
*
*
*
*
*
*
334.38
334.38
334.38
*
263.50
263.13
263.13
263.13
252.63
252.63
252.63
252.63
236.50
263.13
236.50
236.50
236.50
42.75
42.75
42.75
42.75
42.75
42.75
38.50
38.50
38.50
38.50
38.50
38.50
38.50
38.50
32.50
32.50
32.50
32.50
28.75
28.75
28.75
28.75
28.75
442
407
406
406
388
381
406
406
381
381
308
305
295
294
305
305
295
294
257
294
247
238
238
47.63
65.00
69.00
69.00
84.63
88.38
69.00
69.00
88.38
88.38
45.25
45.25
52.88
52.88
45.25
41.13
52.88
52.88
14.00
52.88
27.75
21.00
21.00
108.00
108.00
108.00
108.00
108.00
108.00
108.00
108.00
108.00
108.00
86.63
86.63
86.63
86.63
86.63
86.63
86.63
86.63
62.00
86.63
62.00
62.00
62.00
35.38
35.38
35.38
35.75
35.38
35.38
41.63
41.63
41.63
41.63
22.88
22.88
22.88
22.88
24.56
24.56
24.56
24.56
20.25
28.00
20.25
20.25
20.25
76.88
87.00
80.75
80.75
83.13
81.25
80.75
80.75
81.25
81.25
75.50
72.50
73.25
72.88
72.50
72.13
73.25
72.88
57.13
72.88
56.88
71.63
71.63
75.75
75.75
75.75
75.75
75.75
75.75
75.75
75.75
75.75
75.75
57.25
57.25
57.25
57.25
54.25
54.25
54.25
54.25
42.75
54.25
42.75
42.75
42.75
24
24
24
24
24
24
24
24
24
24
24
21
21
21
21
21
21
21
16
21
16
16
16
60
60
60
60
60
60
60
60
60
60
39
39
39
39
39
39
39
39
32
39
32
32
32
34
34
34
34
34
34
30
30
30
30
30
30
30
30
26
26
26
26
24
24
24
24
24
*
*
*
*
*
*
176.25
176.25
176.25
176.25
116.50
116.13
116.13
116.13
106.63
106.63
106.63
106.63
108.50
122.13
108.50
108.50
108.50
*
*
*
*
*
*
47.50
47.50
47.50
47.50
47.50
47.50
47.50
47.50
55.00
55.00
55.00
55.00
52.00
52.00
52.00
52.00
52.00
AA
43 88.38 86
43 88.38 86
43 88.38 86
43 88.38 86
43 88.38 86
43 88.38 86
37 81.38 86
37 81.38 86
37 81.38 86
37 81.38 86
37 80.38 **
37 103.38 **
37 103.38 **
37 103.38 **
32 72.38 **
32 72.38 **
32 72.38 **
32 72.38 **
25 67.38 **
25 69.00 **
25 67.38 **
25 67.38 **
25 67.38 **
AB
AE
AG
*
*
*
*
*
*
95.25
95.25
95.25
95.25
73.38
70.38
70.38
70.38
78.13
78.13
78.13
78.13
44.38
70.38
44.38
44.38
44.38
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
18.00
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
16.00
11.38
16.00
16.00
16.00
46.00
46.00
46.00
46.00
46.00
46.00
50.25
50.25
50.25
50.25
41.50
41.50
41.50
41.50
38.63
38.63
38.63
38.63
35.75
41.63
35.75
35.75
35.75
* On 100", 120" and 144" stroke units, on this page multi-cylinder engines are mounted on main base beams forward of Samson Post. See dimensions UU, VV, and AA.
** On 64", 74" and 86" stroke units, multi-cylinder engines are mounted behind the Samson Post. See dimensions U, V, and AB.
NOTE: Do not use the above dimensions for foundation. Request a foundation plan.
The above units are designed to be installed on "two point" foundations.
Standard API models shown, other models available on request.
14
UU VV
88
88
88
88
88
88
92
92
92
92
**
**
**
**
**
**
**
**
**
**
**
**
**
55
55
55
55
55
55
55
55
55
55
**
**
**
**
**
**
**
**
**
**
**
**
**
MARK II UNITORQUE
PUMPING UNITS
H
R
(inches)
Unit Size
PHASE
ANGLE
S.U.
T.F. @ (90 - )
/Stroke Length
384.00
384.00
384.00
384.00
384.00
384.00
384.00
384.00
384.00
334.00
334.00
334.00
334.00
334.00
334.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
312.00
222.00
222.00
222.00
222.00
189.00
222.00
222.00
222.00
222.00
222.00
189.00
189.00
189.00
306.00
306.00
306.00
306.00
306.00
306.00
306.00
306.00
306.00
270.00
270.00
270.00
270.00
270.00
270.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
258.00
186.00
186.00
186.00
186.00
162.00
186.00
186.00
186.00
186.00
186.00
162.00
162.00
162.00
228.00
228.00
228.00
228.00
228.00
228.00
228.00
228.00
228.00
203.00
202.56
202.56
202.56
202.56
202.56
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
186.00
124.00
124.00
124.00
124.00
111.00
124.00
124.00
124.00
124.00
124.00
111.00
111.00
111.00
234.38
234.38
234.38
234.38
228.06
228.06
228.06
228.06
228.06
196.50
193.50
193.50
193.50
193.50
193.50
182.38
182.38
182.38
182.38
182.38
182.38
182.38
182.38
182.38
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
173.75
135.75
135.75
135.75
135.75
112.19
130.50
130.50
130.50
130.50
130.50
107.94
107.94
107.94
346.00
346.00
346.00
346.00
346.00
346.00
346.00
346.00
346.00
295.13
295.13
295.13
295.13
295.13
295.13
271.13
271.13
271.13
271.13
271.13
271.13
271.13
271.13
276.88
271.88
271.13
271.13
271.13
271.13
276.88
276.88
276.88
276.88
277.13
276.88
276.88
276.88
212.50
209.50
209.50
209.50
163.63
209.50
209.50
163.63
163.63
163.63
163.63
163.63
163.63
132.00
132.00
132.00
132.00
132.00
132.00
132.00
132.00
132.00
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
112.13
117.88
112.13
112.13
112.13
118.13
112.13
117.88
117.88
117.88
117.88
118.13
117.88
117.88
117.88
97.13
94.13
94.13
94.13
68.13
94.13
94.13
68.13
68.13
68.13
68.13
68.13
68.13
22.0
22.0
22.0
22.0
19.5
19.5
19.5
19.5
19.5
19.0
19.0
19.0
19.0
19.0
19.0
23.0
23.0
23.0
23.0
23.0
23.0
23.0
23.0
23.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.5
24.5
24.5
24.5
27.0
24.5
24.5
24.5
24.5
24.5
27.0
28.0
28.0
-7450
-7450
-7450
-7450
-7160
-7160
-7160
-7160
-7160
-6820
-5385
-4860
-5385
-4860
-4860
-4680
-4680
-4680
-4300
-4300
-4300
-4010
-4010
-4010
-4510
-4130
-4130
-4130
-3840
-3620
-3435
-3560
-3235
-3700
-3470
-3285
-3175
-2140
-2040
-2040
-1930
-1535
-1960
-1890
-1860
-1860
-1820
-1440
-1420
-1420
93.734/216
93.734/216
93.734/216
93.734/216
86.074/192
86.074/192
86.074/192
86.074/192
86.074/192
75.207/168
75.207/168
75.207/168
75.207/168
75.207/168
75.207/168
63.023/144
63.023/144
63.023/144
63.023/144
63.023/144
63.023/144
63.023/144
63.023/144
63.023/144
53.595/120
53.621/120
53.621/120
53.621/120
53.621/120
53.621/120
53.621/120
53.621/120
53.621/120
45.497/100
45.497/100
45.497/100
45.497/100
38.328/86
38.328/86
38.328/86
38.328/86
36.019/86
33.523/74
33.523/74
33.523/74
33.523/74
33.523/74
32.562/74
28.549/64
28.549/64
M-1824D-427-216
M-1280D-427-216
M-912D-305-216
M-912DS-365-216
M-1280D-427-192
M-912DS-427-192
M-912D-305-192
M-640D-305-192
M-456D-305-192
M-912DS-427-168
M-912D-365-168
M-912D-305-168
M-640D-365-168
M-640D-305-168
M-456D-305-168
M-912D-365-144
M-640D-365-144
M-456D-365-144
M-912D-305-144
M-640D-305-144
M-456D-305-144
M-640D-256-144
M-456D-256-144
M-320D-256-144
M-456D-365-120
M-640D-305-120
M-456D-305-120
M-320D-305-120
M-456D-256-120
M-320D-256-120
M-228D-256-120
M-320D-213-120
M-228D-213-120
M-320D-305-100
M-320D-256-100
M-228D-256-100
M-228D-173-100
M-228D-246-86
M-228D-213-86
M-160D-213-86
M-160D-173-86
M-114D-143-86
M-228D-200-74
M-160D-200-74
M-228D-173-74
M-160D-173-74
M-114D-173-74
M-114D-143-74
M-114D-173-64
M-114D-143-64
15
MARK II UNITORQUE
PUMPING UNITS
Structural Data
Unit Size
M-1824D-427-216
M-1280D-427-216
M-912D-365-216
M-912D-305-216
M-1280D-427-192
M-912D-427-192
M-912D-305-192
M-640D-305-192
M-456D-305-192
M-912D-427-168
M-912D-365-168
M-640D-365-168
M-912D-305-168
M-640D-305-168
M-456D-305-168
M-912D-365-144
M-640D-365-144
M-456D-365-144
M-912D-305-144
M-640D-305-144
M-456D-305-144
M-640D-256-144
M-456D-256-144
M-320D-256-144
M-456D-365-120
M-640D-305-120
M-456D-305-120
M-320D-305-120
M-456D-256-120
M-320D-256-120
M-228D-256-120
M-320D-213-120
M-228D-213-120
M-320D-305-100
M-320D-256-100
M-228D-256-100
M-228D-173-100
M-228D-246-86
M-228D-213-86
M-160D-213-86
M-160D-173-86
M-114D-143-86
M-228D-200-74
M-160D-200-74
M-228D-173-74
M-160D-173-74
M-114D-173-74
M-114D-143-74
M-114D-173-64
M-114D-143-64
16
Polished Rod
Capacity (lbs.)
Stroke Lengths
(inches)
Walking
Beam
Crank Pin
Bearing
Samson Post
Bearing
Cross Yoke
Bearing
Wireline Hanger
(inches)
42,700
42,700
36,500
30,500
42,700
42,700
30,500
30,500
30,500
42,700
36,500
36,500
30,500
30,500
30,500
36,500
36,500
36,500
30,500
30,500
30,500
25,600
25,600
25,600
36,500
30,500
30,500
30,500
25,600
25,600
25,600
21,300
21,300
30,500
25,600
25,600
17,300
24,600
21,300
21,300
17,300
14,300
20,000
20,000
17,300
17,300
17,300
14,300
17,300
14,300
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 131
W24 x 104
W24 x 104
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W21 x 68
W21 x 68
W21 x 68
W24 x 84
W24 x 84
W24 x 84
W24 x 84
W21 x 68
W21 x 68
W21 x 68
W21 x 62
W21 x 62
W24 x 84
W21 x 68
W21 x 68
W16 x 57
W16 x 57
W16 x 45
W16 x 45
W16 x 45
W14 x 34
W16 x 45
W16 x 45
W16 x 45
W16 x 45
W16 x 45
W14 x 34
W14 x 34
W14 x 34
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
1SE
2SE
2SE
2SE
2SE
2SE
2SE
1SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
2SE
4SF
2SE
2SE
2SE
2SE
3SF
4SF
3SF
4SF
P19
P19
P19
P19
P19
P19
P19
P19
P19
P19
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P18
P16
P18
P18
P18
P16
P16
P16
P16
P13
P13
P16
P16
P13
P13
P13
P13
P13
P13
C232
C232
C232
C232
C232
C232
C232
C232
C232
C232
C22 C
C22 C
C22 C
C22 C
C22 C
C232
C232
C232
C22 C
C22 C
C22 C
C22 C
C22 C
C22 C
C232
C22 C
C22 C
C22 C
C22 C
C22 C
C20
C22 C
C19
C22 C
C22 C
C20
C19
C20N
C20N
C20N
C18N
C18N
C20N
C20N
C18N
C18N
C18N
C18N
C18N
C18N
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 16 CTRS.
1.38 x 12 CTRS.
1.38 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.38 x 12 CTRS.
1.38 x 12 CTRS.
1.38 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.38 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.25 x 12 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.13 x 9 CTRS.
1.25 x 12 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.25 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
1.00 x 9 CTRS.
Cranks
216130 MROA
216130 MROA
216130 MROA
216130 MROA
192130 MROA
192130 MROA
192130 MROA
192130 MROA
192130 MROA
168108 MROA
168108 MROA
168108 MROA
168108 MROA
168108 MROA
168108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
144108 MROA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
120108 MRA
100108 MRA
100108 MRA
100108 MRA
100108 MRA
8686 MRA
8686 MRA
8686 MRA
8686 MRA
8686 MRA
7486 MRA
7486 MRA
7486 MRA
7486 MRA
7486 MRA
7462 MRA
6462 MRA
6462 MRA
Counterbalance Data
Unit Size
Stroke
Structural Unbalance
Cranks
1,875
22,150
34,110
21,605
32,550
17,990
22,855
27,720
15,935
20,605
25,275
13,595
17,225
20,855
10,970
13,770
16,570
9,430
12,135
14,840
7,910
10,515
13,120
6,200
7,950
9,700
5,050
6,620
8,190
4,285
5,190
6,095
3,400
4,085
4,770
M-320D-205-100
100"
3,700 lbs.
100108 MRA
4,660
19,440
23,980
16,955
21,360
14,560
18,830
11,840
14,740
9,935
12,545
8,655
10,160
11,665
7,200
8,340
9,480
(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.)
M-1280D-427-192
M-1824D-427-216 M-912DS-427-192
M-1280D-427-216 M-912D-305-192
M-912D-365-216 M-640D-305-192
M-912D-365-168
M-912D-305-216 M-456D-305-192 M-912DS-427-168 M-640D-365-168
216"
192"
168"
168"
7,450 lbs.
7,160 lbs.
6,820 lbs.
5,385 lbs.
216130 MROA
192130 MROA
168108 MROA
168108 MROA
MARK II UNITORQUE
PUMPING UNITS
3,365
25,445
38,475
24,850
36,775
20,920
26,215
31,510
18,675
23,730
28,850
16,130
20,085
24,040
13,275
16,340
19,365
11,590
14,535
17,480
9,940
12,775
15,610
8,085
9,985
11,885
6,820
8,530
10,240
5,985
6,975
7,965
5,025
5,770
6,515
975
18,620
30,180
....
....
14,605
19,305
24,005
12,615
17,130
21,645
10,510
14,065
17,620
7,965
10,710
13,455
6,460
9,125
11,790
5,015
7,595
10,175
3,365
5,110
6,850
2,220
3,795
5,370
1,445
2,355
3,265
565
1,255
1,945
460
....
....
....
....
16,040
20,740
25,440
14,055
18,565
23,075
11,945
15,500
19,055
9,400
12,145
14,890
7,895
10,560
13,225
6,450
9,030
11,610
4,800
6,555
8,310
3,655
5,230
6,805
2,880
3,790
4,700
2,000
2,690
3,380
4,890
19,670
24,210
17,185
21,590
14,790
19,060
12,070
14,970
10,165
12,775
8,885
10,390
11,895
7,430
8,570
9,710
5,075
19,850
24,395
17,370
21,775
14,975
19,245
12,255
15,155
10,350
12,960
9,070
10,575
12,080
7,615
8,755
9,895
5,185
19,960
...
17,480
...
15,085
19,355
12,365
15,265
10,460
13,070
9,180
10,685
12,190
7,725
8,865
10,005
M-912D-305-168
M-640D-305-168
M-456D-305-168
168"
4,860 lbs.
168108 MROA
M-912D-365-144
M-640D-365-144
M-456D-365-144
144"
4,680 lbs.
144108 MROA
M-912D-305-144 M-640D-256-144
M-640D-305-144 M-456D-256-144
M-456D-305-144 M-320D-256-144
144"
144"
4,300 lbs.
4,010 lbs.
144108 MROA 144108 MROA
985
....
....
....
....
16,565
21,265
25,965
14,575
19,090
23,605
12,470
16,025
19,580
9,925
12,670
15,415
8,420
11,085
13,750
6,975
9,555
12,135
5,325
7,080
8,835
4,180
5,755
7,330
3,405
4,315
5,225
2,525
3,215
3,905
3,090
....
....
....
....
21,690
27,300
32,910
19,315
24,700
30,085
16,795
21,040
25,285
13,755
17,035
20,315
11,965
15,145
18,325
10,240
13,320
16,400
8,270
10,365
12,460
6,895
8,780
10,665
5,970
7,060
8,150
4,925
5,745
6,565
3,470
....
....
....
....
22,065
27,680
....
19,695
25,080
....
17,180
21,425
25,670
14,135
17,415
20,695
12,345
15,525
18,705
10,620
13,700
16,780
8,650
10,745
12,840
7,275
9,160
11,045
6,350
7,440
8,530
5,305
6,125
6,945
M-228D-246-86
86"
2,140 lbs.
8686 MRA
M-228D-213-86
M-160D-213-86
86"
2,040 lbs.
8686 MRA
M-160D-173-86
86"
1,930 lbs.
8686 MRA
2,715
15,600
19,565
13,480
17,335
11,495
15,280
9,190
11,890
7,495
9,860
6,435
7,840
9,245
5,095
6,160
7,225
2,815
15,700
19,665
13,580
17,435
11,595
15,380
9,290
11,990
7,595
9,955
6,535
7,940
...
5,195
6,260
...
2,925
15,810
19,775
13,690
17,545
11,705
15,490
9,400
12,100
7,705
10,070
6,645
8,050
...
5,305
6,370
...
3,760
....
....
....
....
22,355
....
....
19,985
....
....
17,470
21,710
....
14,425
17,705
....
12,635
15,815
*18,995
10,910
13,990
*17,070
8,940
11,035
*13,130
7,565
9,450
*11,335
6,640
7,730
8,820
5,595
6,415
7,235
M-114D-143-86
86"
1,535 lbs.
8662 MRA
1,525
9,525
11,980
8,270
10,690
7,200
9,640
5,880
7,650
4,770
6,375
4,080
5,045
6,010
3,180
3,925
4,680
* 8 Type S aux. weights will not clear belt cover on M-320D unit.
17
Counterbalance Data
Unit Size
Stroke
Structural Unbalance
Cranks
MARK II UNITORQUE
PUMPING UNITS
(shown in lbs., effective at polished rod with weights at maximum position, including structural unbalance.)
M-456D-365-120
120"
4,510 lbs.
120108 MRA
1,990
21,065
27,395
18,105
23,095
28,085
14,530
18,385
22,240
12,425
16,165
19,905
10,395
14,015
17,635
8,085
10,545
13,005
6,470
8,685
10,900
5,385
6,660
7,035
4,150
5,115
6,080
M-640D-305-120
M-456D-305-120
M-920D-305-120
120"
4,130 lbs.
120108 MRA
2,370
21,445
27,775
18,485
23,475
*28,465
14,910
18,765
*22,620
12,805
16,545
*20,285
10,775
14,395
*18,015
8,465
10,925
*13,385
6,845
9,060
*11,275
5,765
7,040
8,315
4,530
5,495
6,460
M-456D-256-120
120"
3,840 lbs.
120108 MRA
M-320D-256-120
120"
3,620 lbs.
120108 MRA
M-228D-256-120
120"
3,435 lbs.
120108 MRA
M-320D-213-120
120"
3,560 lbs.
120108 MRA
M-228D-213-120
120"
3,235 lbs.
120108 MRA
2,660
21,735
....
18,775
23,765
....
15,200
19,055
22,910
13,095
16,855
20,575
11,065
14,685
18,305
8,755
11,215
13,675
7,140
9,355
11,570
6,055
7,330
8,605
4,820
5,785
6,750
2,880
21,955
....
18,995
23,985
....
15,420
19,275
....
13,315
17,055
....
11,285
14,905
....
8,975
11,435
....
7,360
9,575
....
6,275
7,550
8,825
5,040
6,005
6,970
3,070
22,140
....
19,180
24,170
....
15,605
19,460
....
13,500
17,240
....
11,470
15,090
....
9,160
11,620
....
7,545
9,755
....
6,460
7,735
9,010
5,225
6,190
7,155
2,940
....
....
19,055
....
....
15,480
19,335
....
13,375
17,115
....
11,345
14,965
....
9,035
11,495
....
7,420
9,630
....
6,335
7,610
8,885
5,100
6,065
7,030
3,270
....
....
19,380
....
....
15,805
19,660
....
13,700
17,440
....
11,670
15,290
....
9,360
11,820
....
7,745
9,960
....
6,660
7,935
9,210
5,425
6,390
7,355
*8 type S aux. weights will not clear belt cover on M-320D unit
Unit Size
Stroke
Structural Unbalance
Cranks
M-228D-200-74
M-228D-173-74
M-160D-200-74
M-160D-173-74
M-114D-173-74
M-114D-143-74
M-114D-173-64
M-114D-143-64
74"
1,960 lbs.
7486 MRA
3,685
15,990
....
13,720
18,045
11,085
14,080
9,145
11,845
7,935
9,540
11,145
6,400
7,625
8,850
74"
1,890 lbs.
7486 MRA
3,755
16,060
....
13,790
18,115
11,155
14,150
9,215
11,915
8,005
9,610
....
6,470
7,695
....
74"
1,860 lbs.
7486 MRA
3,785
16,090
....
13,820
18,145
11,185
14,180
9,245
11,945
8,035
9,640
....
6,500
7,725
....
74"
1,820 lbs.
7486 MRA
3,825
16,130
....
13,860
18,185
11,225
14,220
9,285
11,985
8,075
9,680
11,285
6,540
7,765
8,900
74"
1,440 lbs.
7462 MRA
2,230
9,890
12,630
8,670
11,445
7,170
9,180
5,910
7,730
5,130
6,225
7,320
4,105
4,950
5,795
64"
1,420 lbs.
6462 MRA
2,845
11,580
14,710
10,190
13,355
8,485
10,775
7,045
9,125
6,150
7,400
8,650
4,985
5,950
6,915
EXAMPLE: A M-456D-365-120 with 4 No. ORO Counterweights and 4 No. OS Auxiliary Weights would have a maximum counterbalance effect of 27,395 lbs. in the 120" stroke. (See other
example, page 10). Structural Unbalance with a negative () sign indicates a walking beam assembly that is heavy on the well end.
18