Platsil 10 A Msds

Safety Data Sheet
1. Identification of the Preparation and Company
6. Accidental Release Measures
Trade Name:
Product Code:
PlatSil GEL-10 & GEL-OO Silicone Rubber PART A & Part B

Gel-10A, Gel-10B, Gel-OOA, and Gel-OOB
Use of Preparation:
Chemical Class:
Company
RTV Liquid Silicone Rubber system for mold making & casting
Silicone
Polytek Development Corp.
55 Hilton St.
Easton, PA 18042 USA
Telephone: 610-559-8620
csalisbury@polytek.com
Stewardship Solutions
Green Lowe Farm, Shawclough Rd
Waterfoot, Rossendale, Lancs.BB4 9SA, UK
Telephone: (+44) 01706 220901
610-559-8620 (9 am to 5 pm EST)
EU Only Representative:
Emergency Telephone:
2. Hazards Identification
Not a hazardous preparation according to EC Directive 1999/45/EC.
May cause slight eye irritation.
Platinum salt
(In Gel-10B & Gel-OOB)
Organofunctional siloxanes
Silica
7. Handling and Storage

HANDLING: Avoid contact with eyes and mucous membranes. Do not eat, drink or smoke in
work area. Wash hands after handling. Do not heat above 150C since can form formaldehyde.
STORAGE: Store at room temperature in a dry, well-ventilated area. Do not store above 40C.
Store in tightly closed container.
8. Exposure Controls/Personal Protection

ENGINEERING CONTROLS: Provide general and/or local exhaust.
MAXIMUM AIRBORNE EXPOSURE LIMITS:
None established for constituents in formulation.
PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY PROTECTION: Not needed during normal use.
HAND & SKIN: Not normally needed.
EYES: Wear chemical safety glasses or goggles.
9. Physical & Chemical Properties
3. Composition/Information on Ingredients
Chemical Name
Contain spill to minimize contamination. Absorb spilled material with an absorbent such as sand or
earth. Collect and containerize material. Use caution in spill area since causes smooth surfaces to
be slippery. Dispose of contaminated materials in accordance with applicable regulations.
CAS Number/
EINECS Number
Proprietary
% of Product
Hazard Classification
<0.1
Xi R36/37/38
63148-62-9
7631-86-9 or
112926-00-8
75-100
0-25
Not dangerous
Not injurious, not present as
a dust. Inextricably bound in
formulation.
4. First-Aid Measures
EYE CONTACT: Flush with water for 15 minutes. Seek medical attention if symptoms persist.
SKIN CONTACT: Wipe off. Remove contaminated clothing and/or shoes. Wash with soap and
warm water.
INHALATION: Remove to fresh air. Seek medical attention if symptoms develop.
INGESTION: Seek medical attention. Do not induce vomiting unless so directed by a medical
professional.
5. Fire-Fighting Measures
EXTINGUISHING MEDIA: Carbon dioxide, dry chemical, or water fog or fine spray.
SPECIFIC HAZARDS: May produce toxic fumes and gases including carbon monoxide.
OTHER INFORMATION: Firefighters wear full-face positive pressure breathing apparatus and
full chemical protective suit. Violent steam generation or eruption may occur upon application of
water stream to hot product.
APPEARANCE: White opaque liquid

ODOUR: Mild odour
pH: Not applicable
BOILING POINT: >200C (estimated)
FLASH POINT: >200C (estimated)
AUTOFLAMMABILITY: No data available
EXPLOSIVE PROPERTIES: Not explosive
OXIDISING PROPERTIES: Not an oxidizer
VAPOUR PRESSURE: <0.1 mm Hg @ 20C
RELATIVE VAPOUR DENSITY (Air=1): Not determined
SPECIFIC GRAVITY: 1.0 @ 25C
SOLUBILITY IN WATER: Insoluble in water
10. Stability and Reactivity

CHEMICAL STABILITY: Stable under recommended storage conditions.
CONDITIONS TO AVOID: Temperatures >150C.
INCOMPATIBILITIES: None known
11. Toxicological Information

LD50/LC50 for major silicone component:
Draize test, rabbit, eye: 100 uL/24H Mild;
Draize test, rabbit, eye: 100 mg/1H Mild;
Draize test, rabbit, eye: 100 uL/24H Moderate;
Draize test, rabbit, skin: 500 uL/24H Mild;
Date Prepared/Revised: 29 Nov. 2010; Supersedes: 25 Jan. 2010
Polytek Development Corp. - SDS for PlatSil Gel-10 & Gel-OO Part A & Part B - Page 2 of 2
Oral, rat: LD50 = >24 gm/kg;
Oral, rat: LD50 = >17 gm/kg;
Skin, rabbit: LD50 = >2 gm/kg;
SKIN: Prolonged skin contact may cause slight skin irritation.
EYES: May cause eye irritation.
INHALATION: At room temperature, vapors are minimal due to low volatility.
INGESTION: Low hazard.
CHRONIC EFFECTS: None known.
CARCINOGENICITY: Not expected to be carcinogenic.
DEVELOPMENTAL TOXICITY: Not expected to cause developmental toxicity.
REFERENCES:
Manufacturers SDSs and Technical Bulletins
REVISION INDICATOR: Added Gel-OO Part A and Gel-OO Part B.
DISCLAIMER: The information contained herein has been compiled from data that is, to the best of our
knowledge, valid at the date of issue. However, as the conditions under which the product is used are not under
our control, the user is responsible to ensure that a risk assessment is undertaken in accordance with current
legislation and that all necessary precautions are employed.
12. Ecological Information

No formal data is available.
13. Disposal Considerations

Dispose of in accordance with all applicable regulations.
14. Transport Information

NOT A HAZARDOUS MATERIAL FOR SHIPPING PURPOSES BASED ON UNITED
NATIONS RECOMMENDATIONS ON THE TRANSPORT OF DANGEROUS GOODS.
UN NUMBER: Not applicable;
SHIPPING NAME: Not applicable
15. Regulatory Information

HAZARD SYMBOL: None
REACH: Substances in this formulation for which export is >1 tonne/yr to EU were pre-registered
with ECHA prior to Dec. 1, 2008
16. Other Information

RISK PHRASES:
None apply to this preparation. But the following are cited for constituent substances:
R36/37/38- Irritating eyes, respiratory system and skin
SAFETY PHRASES:
S24/25 Avoid contact with the skin and eyes
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice
S28 -After contact with skin, wash immediately with water or industrial hand cleaner
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show
label where possible)
OTHER PHRASES:
Keep containers tightly closed when not in use
TRAINING ADVICE: All personnel using/handling this product should be trained in proper
chemical handling and the need for and use of control measures including protective equipment.
RECOMMENDED USES AND RESTRICTIONS: This product is intended for industrial use only.
Further details of intended applications and guidance relating to technical aspects of use are
contained in the relevant Technical Bulletin/Advice sheet.
Date Prepared/Revised: 29 Nov. 2010; Supersedes: 25 Jan. 2010

Platsil 10 A Msds

Uploaded by

Copyright:

Available Formats

Platsil 10 A Msds

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Platsil 10 A Msds

Uploaded by

Copyright:

Available Formats

Safety Data Sheet

1. Identification of the Preparation and Company

6. Accidental Release Measures

PlatSil GEL-10 & GEL-OO Silicone Rubber PART A & Part B

7. Handling and Storage

8. Exposure Controls/Personal Protection

9. Physical & Chemical Properties

APPEARANCE: White opaque liquid

10. Stability and Reactivity

11. Toxicological Information

12. Ecological Information

13. Disposal Considerations

14. Transport Information

15. Regulatory Information

16. Other Information

You might also like