Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 300 views

    Epoxy Parfilm Ultra 4 MSDS

    Uploaded by

    Zsuzsanna Kurucz
    This document summarizes the key information from a material safety data sheet (MSDS) for an epoxy parfilm paintable mold release. It lists hazardous ingredients including dimethyl ether and 1,1,1,2-tetrafluoroethane. Exposure can cause eye and skin irritation as well as adverse health effects from inhalation. In case of exposure, the MSDS provides first aid measures. Proper protective equipment should be worn when handling. The product is flammable and reactive, so ignition sources should be avoided during storage and use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Epoxy Parfilm Ultra 4 MSDS

    Uploaded by

    Zsuzsanna Kurucz
    300 views2 pages
    This document summarizes the key information from a material safety data sheet (MSDS) for an epoxy parfilm paintable mold release. It lists hazardous ingredients including dimethyl ether and 1,1,1,2-tetrafluoroethane. Exposure can cause eye and skin irritation as well as adverse health effects from inhalation. In case of exposure, the MSDS provides first aid measures. Proper protective equipment should be worn when handling. The product is flammable and reactive, so ignition sources should be avoided during storage and use.

    Original Description:

    MSDS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the key information from a material safety data sheet (MSDS) for an epoxy parfilm paintable mold release. It lists hazardous ingredients including dimethyl ether and 1,1,1,2-tetrafluoroethane. Exposure can cause eye and skin irritation as well as adverse health effects from inhalation. In case of exposure, the MSDS provides first aid measures. Proper protective equipment should be worn when handling. The product is flammable and reactive, so ignition sources should be avoided during storage and use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    300 views2 pages

    Epoxy Parfilm Ultra 4 MSDS

    Uploaded by

    Zsuzsanna Kurucz
    This document summarizes the key information from a material safety data sheet (MSDS) for an epoxy parfilm paintable mold release. It lists hazardous ingredients including dimethyl ether and 1,1,1,2-tetrafluoroethane. Exposure can cause eye and skin irritation as well as adverse health effects from inhalation. In case of exposure, the MSDS provides first aid measures. Proper protective equipment should be worn when handling. The product is flammable and reactive, so ignition sources should be avoided during storage and use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MATERIAL SAFETY DATA SHEET

    Manufacturer: Price-Driscoll Corporation


    17 Industrial Drive, Waterford, CT 06385
    Tel: 800 442-3575 Fax: 800 447-3557

    Product Name:
    Series:
    Form:
    Emergency Contact:

    Epoxy Parfilm Paintable Mold Release


    Ultra 4
    Aerosol cans, 12 oz.
    INFOTRAC 1(800)535-5053

    Date: 03.10.04

    Rev: 08/2011

    Hazardous Ingredient/Identity Information


    INGREDIENT
    Dimethyl Ether
    1, 1, 1, 2 Tetrafluoroethane
    Aliphatic Hydrocarbon

    PERCENT
    40% 60%
    60% 40%
    4% -- 10%

    OSHA PEL (8 hr TWA)


    1000 ppm
    1000 ppm
    (TWA: 400 ppm, STEL: 500 ppm)

    Physical/Chemical Characteristics
    Appearance:
    Boiling Point:
    Vapor Pressure (mm Hg.)
    Vapor Density (AIR = 1)
    Specific Gravity (H2O = 1)
    Solubility in Water @70F

    Clear, colorless liquid under pressure in cans


    N/A
    69 psig @70F
    2.6
    .989
    Partially soluble

    Health Hazard Data


    Routes of Entry:

    Eye:
    Skin:
    Ingestion:
    Inhalation:

    Skin: Yes

    Inhalation: Yes

    Ingestion: Not likely

    Potential acute health effects of overexposure:


    Eye contact with liquid or vapor may cause severe irritation, redness, tearing, blurred
    vision and possible freeze burns.
    Skin contact with the liquid may cause freezing of the skin (frostbite) or irritation.
    Ingestion not a likely route of entry
    Overexposure by inhalation of concentrated vapors may cause respiratory irritation,
    nausea, headache and dizziness. Inhalation may produce anesthetic effects and feeling of
    euphoria. Prolonged overexposure can cause rapid breathing, headache, dizziness,
    narcosis, unconsciousness and death from asphyxiation, depending on concentration and
    time of exposure.

    MEDICAL CONDITIONS AGGRAVATED BY OVEREXPOSURE:


    May increase susceptibility to toxicity of excessive exposures in persons with pre-existing diseases of the central
    nervous or cardiovascular systems.

    EMERGENCY AND FIRST AID PROCEDURES


    EYES:

    SKIN:

    INHALATION:

    INGESTION:

    Immediately rinse eyes with running water for 15 minutes. If irritation develops, get medical
    attention. Consult physician immediately if frostbite occurs.
    Wash affected area with soap and water. Remove and launder contaminated clothing
    before reuse. Treat as frostbite. If irritation develop or if there is evidence of tissue
    damage, get medical attention.
    Remove to fresh air. If breathing has stopped, restore breathing at once. Administer
    oxygen and get immediate medical help.
    Ingestion is an unlikely route of exposure. Do not induce vomiting unless instructed to do so
    by a physician. Seek immediate medical attention.

    Ultra 4 Epoxy Parfilm MSDS, Page 2 of 2

    Fire & Explosion Hazard Data


    Flash Point:

    N/A Flash point not determined for mixture. Product is non-flammable per ASTM
    D3065-01.

    Extinguishing Media:

    Dry chemical extinguisher (B-C), Water

    Unusual Fire and


    Explosion Hazards:

    Container may rupture or explode under fire conditions.


    Hazardous decomposition products may be formed (see reactivity data section.)
    Under fire conditions, empty containers retain product residue and can be
    dangerous.

    Fire Fighting Procedures:

    Use dry chemical, foam, or CO2; water may be ineffective but should be used to
    keep exposed containers cool. Stop the release of materials if possible. Avoid
    accumulation of unburned materials. Remove personnel in general area.
    ____________________________________________________________________________________________

    Reactivity Data
    Stable:

    Yes

    Conditions to Avoid:

    Ignition sources such as open flames, sparks, static discharges or glowing


    metal surfaces.

    Incompatibility (Materials to Avoid):

    Powdered or alkaline earth metals..

    Hazardous Combustion By-products:

    Fluorine compounds and HF

    Hazardous Polymerization:

    Will not occur

    Precautions for Safe Handling and Use


    Steps to be taken in case material is spilled or released: Avoid breathing vapors. Evacuate area until vapor has
    dispersed. Remove all sources of ignition. Stop or reduce discharge if it can be done safely.
    Handling:

    Minimize breathing of vapors and avoid prolonged or repeated contact with skin. Wear proper
    protective equipment. If ventilation is not sufficient, wear proper respiratory equipment. Do not use
    near ignition sources. Contents are under pressure. Do not puncture, incinerate, expose to open
    flame or temperature above 120F. Keep out of direct sunlight. For industrial use only. Keep out
    of reach of children. Store in a well-ventilated place, Keep container tightly closed. Read label
    precautions. Do not remove or deface label.

    Storage:

    Store in a cool, dry, well ventilated area away from all sources of ignition. Do not store at
    temperature above 120F.

    Disposal:

    Empty fully and relieve pressure. Empty containers can be recycled. Dispose according to Local,
    State and Federal regulations.

    Ventilation:

    Maintain adequate mechanical ventilation to keep employee exposure below manufacturers


    recommended limits.

    Skin protection: The use of chemically resistant gloves is recommended if there is any possibility of prolonged or
    repeated liquid contact with the skin.
    Eye protection: Proper eye protection should be worn in any type of industrial operation, such as splashproof
    faceshield or goggles.
    HMIS Information:

    Health:

    Flammability:

    Reactivity:

    Manufacturers Statement: This information contained herein is believed to be correct as of issue date.
    Manufacturer shall not be liable for damages arising out of, or in connection with the information obtained
    herein. It is intended to assist in the normal, safe usage of product. No warranty of any kind is expressed
    or implied as to the accuracy, completeness or adequacy of the information obtained herein.

    You might also like