Professional Documents
Culture Documents
MIDAS Civil Advanced Webinar Presentation
MIDAS Civil Advanced Webinar Presentation
Advanced Webinar
Date: Oct 4th, 2011
Contents:
Overview
Modeling
Boundary Conditions
Loading
Analysis Results
Design and Misc.
midas Civil
Introduction
1. Overview
midas Civil is 3d structural analysis and design software based on FEM analysis
Structure Types
midas civil
Introduction
1. Overview
Structure Types
midas Civil
Introduction
2. Analysis Types
Moving Load Analysis
Construction Stage Analysis
P-Delta Analysis
Buckling Analysis
Eigen value analysis
Heat of Hydration analysis
Geometry Non-Linear Analysis
Material Non-Linear Analysis
Pushover Analysis
Time History Analysis
Response Spectrum Analysis
midas Civil
Introduction
3. Element Types
1- D Elements
Truss
Tension only
Hook
Cable
Compression only
Gap
2-D Elements
Plate 3 Node, 4 Node
General/Tapered Beam
Plane Stress
Plane Strain
Axisymmetric
3-D Elements
Solid 4 Node, 6 Node, 8 Node
midas Civil
Introduction
midas Civil
Modeling
Model View
midas Civil
Modeling
1. Bridge Wizards
RC Bridge
Grillage Model Wizard
FCM Bridge
FSM Bridge
ILM Bridge
MSS Bridge
Suspension Bridge
Cable Stayed Bridge
midas Civil
Modeling
2. dxf import
Import dxf model
Analyze in midas civil
midas Civil
Modeling
2. Dxf import
Important considerations:
Polyline in dxf file will be imported as a beam element.
Surface in dxf file will be imported as a plate element.
Solid cannot be imported
Unit system must be consistent
import
Beam Elements
Line
import
Plate Element
Polyline Rectangle
import
3-D Face
Plate Element
midas Civil
Modeling
3. Material Properties
The material properties from several codes can de defined:
ACI
Eurocode
Canadian Code
Indian Code
BS code
The Time Dependent Material for Creep, Shrinkage and Compressive Strength can be define as per:
CEB-FIP ( 1990)
CEB-FIP (1978)
ACI
Combined ACI&PCA
AASHTO
INDIA( IRC:18-2000)
European
midas Civil
Modeling
4. Section Properties
Midas civil equips the users with the following sections
Standard Sections
Composite sections
Combined sections
SRC sections
PSC Sections
User Defined Section
midas Civil
Modeling
4. Section Properties
Determination of Torsional moment of inertia and effective shear area
1 unit (Centroid)
Fixed Support
Meshed Element ( Length 20m)
midas Civil
Modeling
5. Create Elements
Node to Node
Grid
midas Civil
Modeling
midas Civil
Modeling
7. Extrude Elements
The extrusion can be done in the following three manner:
Node -> Element
Element -> Plate
Plate -> Solid
midas Civil
Modeling
Element Table
Works Tree
midas Civil
Modeling
9. Mass Data
Structure Mass
Automated
Program determines the mass of
the structure considering the
material density
Load To Masses
Nodal Masses
midas Civil
Boundary Conditions
1. Supports
USE: To provide the support to the structures. Can be used to simulate pin and fix supports
TYPE: The supports can be provided to X Y and Z directions. Also
the rotations about these axes can be restrained.
midas Civil
Boundary Conditions
midas Civil
Modeling
midas civil
Boundary Conditions
4. Elastic Links
USE: Can be used to connect two member via springs. Especially used to simulate the bearing
Characteristics. The equivalent spring constants of bearings can be
Specified.
Can be used to simulate the ballast characteristics.
TYPE: Four types of springs can be defined:
General
Rigid
Tension Only
Compression Only
Multi Linear
Girder
Pier
Midas civil
Modeling
4. Elastic Link
Simulation of Ballast Characteristics
midas civil
Boundary Conditions
Continuous
midas Civil
Modeling
6. Rigid Link
USE: To connect the nodes which cannot move relative to each other. Especially used to connect
the nodes representing the same solid.
TYPE: The rigid link can be provided to restrict DX, DY, DZ, RX RY, RZ
midas Civil
Boundary Conditions
X
Global Axis
Y
X
Node Local Axis
midas Civil
Boundary Conditions
midas Civil
Loading
midas Civil
Loading
2. Self Weight
USE: The self weight of the structure is automatically considered when the element is acivated.
TYPE: The self weight can be applied to X, Y and Z direction.
midas Civil
Loading
Dz = 1 mm
Dz = 2 mm
midas Civil
Loading
midas Civil
Loading
midas Civil
Modeling
Dz = 10 mm
Dz = 5mm
Dz = 8mm
Dz = 10 mm
midas Civil
Loading
5. Beam Load
USE: For specifying the regular beam forces such as concentrated forces, uniformly distributed forces
Etc.
TYPE: The following types of beam loads
can be specified:
Element beam Loads for each element
Line beam Loads for a set of elements
Typical Beam Loads Special Distribution
midas Civil
Loading
midas Civil
Loading
6. Plane Load
USE: For specifying the pressure load which doesnt cover the entire plate.
TYPE: Rectangular and Trapezoidal pressure distribution can be applied.
midas Civil
Loading
7. Temperature Load
USE: To simulate the stresses obtained due to the change in temperature.
TYPE: The following type of temperature loads can be specified:
System Temperature - for applying the change in temperature to whole structure.
Nodal Temperate for applying change in temperature to certain nodes.
Element Temperature for applying change in temperature to certain elements.
Temperature Gradient for applying change in temperature to beam and plate sections.
Beam Section Temperature for applying temperature gradient to beam sections.
AASHTO
Eurocode
midas Civil
Loading
7. Temperature Load
The width of the section is automatically considered for the calculation
of thermal stresses
midas Civil
Loading
7. Temperature Load
Midas Civil automatically considers the self restraint moment
obtained in the section due to differential temperature.
Even if the resultant force or bending moment is 0, thermal stress may be
expected
T = 20 C
T = 10 C
midas Civil
Loading
8. Moving Load
USE: For obtaining the critical force effects due to movement of vehicles on the bridge.
TYPE: Midas Civil has the database for the following codes:
AASHTO Standard
AASHTO LRFD
Eurocode
INDIAN code
Canadian Code
PENNDOT
BS Code
User defined vehicles can also be specified and used for moving load analysis.
midas civil
Loading
8. Moving Load
AASHTO LRFD Section 3.6.1.3.1
** I
J
(only J end)
midas civil
Loading
8. Moving Load
midas civil
Loading
9. Hydrostatic Load
USE: To simulate the hydrostatic or earth pressure load in the lateral direction
TYPE: The user can select the linear or curved type of variation.
The user can also specify the constant intensity load.
Soil
midas civil
Loading
8. Moving Load
Train Lane
Vehicles Lane
midas civil
Loading
9. Load Combination
USE: To see the force effect due to a combination of loads.
Also for defining combinations for strength and service limit states.
TYPE: The load combinations can be made considering the loads
Activated in the stages and specifying factors for the same.
The load combinations can be automatically generated for the following
Codes:
AASHTO LRFD 07
AASHTO Standard 2000
AASHTO LRFD 02
Indian Code
Eurocode
Taiwan Code
midas civil
Loading
8. Load Combination
The load combination can be generated
Considering the construction stage loads also.
midas civil
Analysis
9. Buckling Analysis
Using this option the user can
Select the range of loads to be used
For the determination of mode shape.
Positive: Force in direction of gravity
will be considered
Search: The force can be applied
parallel to gravity direction or anti parallel to it
Thank You!
For more information, please visit us at
http://en.midasuser.com