JPN Pahang Physics Module Form 4

Chapter 5 Light
CHAPTER 5: LIGHT

In each of the following sentences, fill in the bracket the appropriate word or words given below.

solid, liquid, gas, vacuum, electromagnetic wave, energy

1. Light is a form of ( energy ).

2. It travels in the form of (Electromagnetic wave )
3. In can travel through ( Solid, liquid, gas and vacuum )
4. It travels fastest in the medium of ( vacuu )
5. Light of different colours travels at the m
same speed in the medium of ( vacuu )
m
Light allows us to see objects.
Light can be reflected or refracted.

5.1 UNDERSTANDING REFLECTION OF LIGHT

Plane mirror and reflection: In the boxes provided for the diagram below, write the name of each
of the parts indicated.

Incident angle Normal Reflected angle

Incident ray Reflected ray

i r

Point of incidence
Plane mirror

Laws of Reflection: State the laws of reflection.

The incident ray, the reflected ray and the normal to the point of incidence, all lie in
(i) …………………………………………………………………………………………….
the same plane.
………………………………………………………………………………………..
…….

i
r
Plane mirror

(ii) ……………………………………………………………………………………………..
The angle of incidence, i = The angle of reflection, r

1
 JPN Pahang Physics Module Form 4
Chapter 5 Light
…………………………………………………………………………………………….
.
Exercise 1. The diagram below shows how the relationship between incident angle and reflected
angle can be investigated.
Fill in the values of the angles of reflection, r in the table below

mirror mirror
i r i r

ON
OFF Laser pen
ON
OFF
ir10102020303040405050
Laser pen

Exercise 2:
Based on the diagram on the left,
Original direction
calculate the angle, . Hence
Mirror determine the angle of deviation, d.

o
d  = 40o
d = 80o
o
50

normal

Exercise 3:

2
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Mirror before
rotation 
Mirror rotated  o


Incident ray norm Reflected ray before

al rotation

Reflected ray after

rotation

Based on the diagram above, when the mirror is rotated an angle,, without changing
the incident ray, what is the angle rotated,, for the reflected ray in terms of  ?
 = 2

Image formed by a plane mirror: Using the law of reflection, complete the ray diagram to
determine the position of the image.

A B C
object Image

i1
r1

Eye

Perpendicular to the mirror

What can you say about the line joining object and image? ………………………………………
AB = BC
What can you say about the distances AB and BC? ………………………………………………..

Differences between real and virtual image:

3
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Real imageVirtual imageCan be caught on a

screenCannot be caught on a screenFormed by the
meeting of real rays.Form at a position where rays
appear to be originating.

Characteristics of image formed by plane mirror: Observe the pictures below as well as using
previous knowledge, list the characteristics.

i) virtual
mir
ror
ii) laterally inverted

object image
iii) same size as object

iv) object distance =

image distance

Exercise 1:
Complete the ray diagram below consisting of 2 rays originating from the object, reflected
and entering the eye such that the eye sees the image.

Mirror

Eye object

Exercise 2:

4
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Ahmad is moving with speed 2 m s-1 towards a plane mirror. Ahmad and his image will
approach each other at

1 m s-1
2 m s-1
3 m s-1
4 m s-1

Exercise 3:
Four point objects A, B, C and D are placed in front of a plane mirror MN as shown. Between their
images, which can be seen by the eye?
image A image B image C image D

M N

Eye
A B C D

Only image D can be seen because the line joining image D to the eye cuts the
actual mirror

ACTIVITY: Find out some of the uses of plane mirrors (application of reflection).

5
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Curved Mirrors:
Concave mirror Convex mirror

C P C P

r r

Terminology: Refer to the diagrams above and give the names for the following:
C = Centre of curvature
r = Radius of curvature
P = Pole
PC = Principal axis

Effect of curved mirrors on incident rays:

a) Incident rays parallel to the principal axis:

Concave mirror Convex mirror

C F P P F C

f f

r r

Study the diagrams above and fill in the blanks for the following sentences.
Rays parallel to the principal axis converge at the ……………………,
Principal focus F
F is positioned at the ………………….. between C and P
Mid point
FP is named the ………………………… which is denoted by f.
Focal length
Hence write an equation giving the relationship between r and f.

r = 2f

6
 JPN Pahang Physics Module Form 4
Chapter 5 Light

b) Incident rays parallel to each other but not parallel to the principal axis:

Concave mirror Convex mirror

Focal plane Focal plane

C F P P C
F

f f

r r

Study the diagrams above and fill in the blanks in the following sentences.

 secondary focus
Parallel rays converge at a point called ……………………………

 secondary foci
The focal plane joins F, the principal focus and all …………………………..and is

perpendicular
………………………. to the principal axis

 incident
The ray passing through C is reflected back along the line of the…………………….ray.

 focal length
The distance between the focal plane and the mirror is the ………………………….,f.

Image formed by curved mirror (ray diagram method)

Principle of drawing ray diagrams:

a. Rays parallel to the principal axis are reflected through the principal focus, F.

C F P P F C

Concave mirror Convex mirror

7
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Exercise 1: Complete the ray diagrams below:

C F P P F C

Concave mirror Convex mirror

b) Rays passing through the principal focus are reflected parallel to the principal axis.

C F P C
P F

Concave mirror Convex mirror

Exercise 2: Complete the ray diagrams below:

C F P C
P F

Concave mirror Convex mirror

c) Rays passing through the center of curvature are reflected directly back.

C F P C
P F

Concave mirror Convex mirror

8
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Exercise 3: Complete the ray diagrams below:

C F P C
P F

Concave mirror Convex mirror

Image formed by concave mirror:

Using the principles of construction of ray diagram, complete the ray diagrams for each of the cases
shown below:

u = object distance ; v = image distance ; f = focal length ; r = radius of curvature

Case 1: u > 2f

Concave mirror

object F
C F
image

Hence state the characteristics of image formed:

i) diminished ii) real iii) inverted

Case 2: u = 2f or u = r

Concave mirror
object
F F
C
image

Characteristics of image formed:

i) Same size ii) real iii) inverted

9
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Case 3: f < u < 2f

Concave mirror
object

F F
C

image

Characteristics of image formed:

i) magnified ii) real iii) inverted

Case 4: u=f

Concave mirror
object
F
C F

Characteristics of image formed:

i) Image at infinity

Case 5: u<f

Concave mirror

object image
F
C F

Characteristics of image formed:

i) magnified ii) virtual iii) upright

10
 JPN Pahang Physics Module Form 4
Chapter 5 Light
Image formed by convex mirror: (using construction of ray diagram).

u = object distance ; v = image distance ; f = focal length ; r = radius of curvature

Concave mirror
object
image
F
C F

Characteristics of image formed:

i) diminished ii) virtual iii) upright

Uses of curved mirrors:

Newton’s Telescope: Fill in the boxes the type of mirror used

Plane mirror

Lens

Eye

Concave mirror

Car head lamp

Curved mirror

lamp

Where should the lamp be placed to achieve the

OFF ON above result? At the principal focus

11
 JPN Pahang Physics Module Form 4
Chapter 5 Light
Activity: Find more uses of curved mirrors.

12
 JPN Pahang Physics Module Form 4
Chapter 5 Light
5.2 UNDERSTANDING REFRACTION OF LIGHT

air

water

What is the phenomenon which causes the bending of light in the picture above?
refraction
………………………………………………………………………………………………………
…

Why did this bending of light occur? (think in terms of velocity of light)
The velocity of light changes when it travels from one medium into another
………………………………………………………………………………………………………
…

Refraction of light: Incident ray

Incident angle Normal
Fill in each of the boxes
the name of the part shown
Refracted angle
i
Refracted ray
Air
Glass
r

Air
Emergent ray
Emergent angle
i

13
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Direction of refraction:

normal normal
Less dense denser
medium medium
Denser Less dense
medium medium

Draw on the diagrams above the approximate directions the refracted rays.

When light travels from a less dense medium to a denser medium, the ray is refracted
(toward/away from) the normal at point of incidence.

When light travels from a more dense medium to a less dense medium, the ray is refracted
(toward/away from) the normal at point of incidence.

Snell’s law:

The ratio of sin(angle of incident) to sin(angle of refraction) is a

Snell’s law states that ……………………………………………………
constant
sin  incident angle 
i.e.  constant
sin  refracted angle 

Refractive index, n
What is the name and symbol of the constant? …………………………..

Exercise 1:

Referring to the diagram on the right,

Calculate the refractive index of liquid-X. 60o
Air
n

sin 60 0


sin 30 0  Liquid-X

= 1.732 30o

14
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Exercise 2:

Referring to the diagram on the right,

Calculate the refractive index of liquid-Y. 45o
Air

Liquid-Y
n = 1.414
30o

Exercise 3:
Eye

Air
On the diagram to the right, draw two rays water
which originate from the fish to show
how a person observing from above image
the surface of the water is able to see the
image of the fish at an apparent depth
less than the actual depth of the fish. object

Exercise 4:
An equation that gives the relationship between apparent depth, real depth and the refractive index
of water for the diagram above is
real depth
n
apparent depth

If the fish is at an actual depth of 4 m and the refractive index of water is 1.33, what is the apparent
depth of the image?

Apparent depth = 3 m

15
 JPN Pahang Physics Module Form 4
Chapter 5 Light

5.3 UNDERSTANDING TOTAL INTERNAL REFLECTION OF LIGHT

Critical angle and total internal reflection:

Figures a, b and c show rays being directed from liquid-Y which is denser than air towards the air
at different angles of incident,.
Air Air 90o

Liquid-Y Liquid-Y

C
<C
Partial reflection
Figure a Figure b

Among the figures a, b and c, only Figure a

has a complete ray diagram.

(i) Complete the ray diagrams for Air

Figure b and Figure c. Liquid-Y
Critical angle
(ii) The angle, C is called …………………….
>C Total reflection
(iii) The phenomenon which occurs in
Figure c yang is called Figure c
Total internal reflection
…………………………………….

(iv) State 2 conditions which must be satisfied in order for the phenomenon
you mentioned in (iii) to occur.
Light must travel from denser medium to less dense medium
………………………………………………………………………………………
The angle of incident must be greater than the critical angle
………………………………………………………………………………………

Exercise 1:
Air 90o
Referring to figure d and using Snell’s law,
write an equation that gives the relationship Liquid-Y
between the critical angle, C, the refracted angle
and the refractive index of liquid-Y C

1
n
sin  C  Figure d

16
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Exercise 2:

Referring to Figure e, determine the

refractive index of liquid-Z
Air 90o
1
n
sin  30 0  Liquid-Z
30o
=2

Figure e
Exercise 3:

Explain why a pencil partially immersed in water looks bent.(Use a ray diagram).

Eye

image

Exercise 4:

Complete the path of the ray in the diagram below and explain how a mirage is formed.
object
Layer of cool air

Eye i>C

Layer of hot air

ground
During the day, the ground is heated by the sun. The layer of air near the ground is hotter than the
layers above. Hot air is less dense than cool air. Therefore ray from object is refracted away from
the normal. When angle of incident becomes larger than the critical angle, total internal reflection
occurs. Thus a mirage is formed.
Image
(mirage)

17
 JPN Pahang Physics Module Form 4
Chapter 5 Light
Exercise 5:

Completing the ray diagram below, to show how a periscope works: (critical angle of glass = 42o)

Glass prism
Object o
45
Total internal
reflection takes
place because angle
of incident > critical
angle

Eye

18
 JPN Pahang Physics Module Form 4
Chapter 5 Light
5.4 UNDERSTANDING LENSES

Thin Lenses :

Types of lenses : Name the types of lenses shown below.

(i)

a. Biconvex b. Plano-convex c. Convex meniscus

(ii)

a. Biconcave b. Plano-concave c. Concave

meniscus

Formation of a convex lens and terminology: name the parts shown

Optic centre
Principal axis

Centre of curvature

Formation of a concave lens and terminology: name the parts shown

Optic centre

Principal axis

Centre of curvature

19
 JPN Pahang Physics Module Form 4
Chapter 5 Light
Refraction of rays parallel to the principal axis of a convex lens:

Draw in the following diagrams the paths of the rays after passing through the lens.
Write in the boxed provided, the name of the point or line shown.

i)
Principal focus

ii)
Principal focus

iii) Focal plane

F
Secondary focus

iv)

Secondary focus

F
Focal plane

20
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Principles of constructing ray diagrams: Complete the path of each ray after passing through the
lens

i) ii) iii)

F F F
F F F

iv) v) vi)

F F F
F F F

vii) viii)

F F
F F

Exercise 1:

State the meaning of each of the following terms:

i) Focal length , f : The distance between optic centre and the principal focus

ii) Object distance, u : The distance between the object and optic centre

iii) Image distance, v : The distance between the image and the optic centre

Exercise 2:

Describe how you would estimate the focal length of a convex lens in the school lab.

Place the lens facing the window on the far side of the lab. Adjust the distance of a screen behind
the lens until a sharp image of the window is formed. Measure the focal length (distance between
the lens and the image).

21
JPN Pahang Physics Module Form 4
Chapter 5 Light
Characteristics of image formed by a convex lens : (Construction of ray diagram method)

Construct ray diagrams for each of the following cases and state the characteristics of the image
formed.

i) Case 1 : u > 2f where u = object distance ; and f = focal length of lens.

Lens

object F

F image
2F

Characteristics of image:

Diminished, real and inverted

ii) Case 2 : u = 2f

Lens

object F
image
2F F

Characteristics of image:

Same size, real and inverted

iii) Case 3 : 2f > u > f

Lens

object F
image
2F F

Characteristics of image:

Magnified, real and inverted

22
 JPN Pahang Physics Module Form 4
Chapter 5 Light
iv) Case 4 : u = f

Lens

object F

2F F

Characteristics of image:

Image at infinity

v) Case 5 : u < f

image Lens

object
F

2F F

Characteristics of image:

Magnified, virtual, upright

Exercise:

In each of the following statements below, fill in the space provide one of the following conditions.
( u > 2f / 2f = u / 2f > u > f / u > f / u < f )

i) To obtain a real image, the object must be placed at a distance u such that … u > f ………

ii) To obtain a virtual image, the object must be placed at a distance u such that u < f ………

23
 JPN Pahang Physics Module Form 4
Chapter 5 Light
Characteristics of image formed by concave lens : (by construction of ray diagrams )

Construct a ray diagram for each of the following and state the characteristics of the image formed

i)
Lens

object image F

2F F

Characteristics of image:
Diminished, virtual, upright

ii)
Lens

object image F

2F F

Characteristics of image :
Diminished, virtual, upright

Note: Image formed by a concave lens is always diminished, virtual and on the same side of the
lens as the object.

Power of a lens (p)

The power of the lens is given by:
1
Power of lens = focal length

Sign convention (for focal length) and the S.I. unit for power of a lens.
 The focal length of a convex lens is (positive/negative)
 The focal length of a concave lens is (positive/negative)
 The S.I. unit for the power of a lens is…Dioptre…and its symbol is…D…
 When calculating the power of a lens, the unit of the focal length must be in (m/cm)

Exercise 1 : A concave lens has a focal length of 10 cm. What is its power?
1 1
p =  = -10 D
f 0 .1

24
 JPN Pahang Physics Module Form 4
Chapter 5 Light
Exercise 2 : The power of a lens is + 5 D. State whether it is a convex lens or a concave lens and
calculate its focal length.
Convex lens.

f = 20 cm

Linear Magnification (m) :

height of image
Definition: Linear magnification = height of object

hi
m
h0

Based of the definition above and the ray diagram below, derive an expression for the relationship
between linear magnification, m, the object distance, u and the image distance, v.

B Lens
v
ho
O C
A
hi
u D

The triangles, ABO and DCO are similar triangles.

hi v
Therefore, 
h0 u

v
Therefore, m
u

Lens formula :

The relationship between the object distance, u, image distance, v, and the focal length, f, of a lens
is given by

1 1 1
 
u v f

 This lens formula is valid for both convex and concave lenses.

When using the lens formula, the ‘real is positive sign convention’ must be followed.

25
 JPN Pahang Physics Module Form 4
Chapter 5 Light
The rules stated in this sign convention are:

1) The focal length of a convex lens is positive while the focal length of a concave lens is negative

2) Object distance is positive for real object; object distance is negative for virtual object

3) Image distance is positive for real image: image distance is negative for virtual image

Application of the lens formula:

Exercise 1. An object is placed 10 cm in front of a converging lens of focal length 15 cm.

Calculate the image distance and state the characteristics of the image formed.

1 1 1
 
u v f
1 1 1
 
10 v 15
1 1 1
 
v 15 10
v = - 30 cm
Image is virtual

Exercise 2 : An object is placed 30 cm in front of a converging lens of focal length 25 cm.

a) Find the position of the image, and state whether the image is real or virtual.
b) Calculate the linear magnification of the image.

1 1 1
 
30 v 25

v = 150 cm ; Image is real

m = v/u

m = 150/30

m=5

Latihan 3 : An object is placed 30 cm in front of a diverging lens of focal length 20 cm. Calculate
the image distance and state whether the image is real or virtual.
1 1 1
 
30 v 20

v = - 12 cm ; image is virtual

Lenses and optical instruments :

1. Magnifying glass (simple microscope ):

26
 JPN Pahang Physics Module Form 4
Chapter 5 Light

A lens acts as a magnifying glass when the object is placed as in case 5 on page 23.

i) A magnifying glass consists of a (converging / diverging) lens.

ii) The object must be placed at a distance (more than f / same as f / less than f / between
f and 2f / more than 2f) in order for the lens to act as a magnifying glass.
iii) The characteristics of the image formed by a magnifying glass are yang (real / virtual) ;
(inverted / upright) ; (magnified /diminished) ; (on the same side as the object / on
the opposite side of the object).
iv) Greater magnification can be obtained by using a lens which has (long / short) focal
length.

Complete the ray diagram below to show how a magnifying glass produces an image of the
object.

image Lens

object
F

2F F

Exercise 1 : A magnifying glass produces an image with linear magnification = 4. If the power of
the lens is +10 D, find the object distance and image distance.

v
4  v  4u
u
1
10   f  10 cm
f
1 1 1
 
u 4u 10
 u  12.5 cm
v = 50 cm

Exercise 2: Which of the following lenses with their powers given below makes the magnifying
glass with the highest power of magnification?

A. – 5 D B. –25 D C. +5 D D. +25 D.

27
 JPN Pahang Physics Module Form 4
Chapter 5 Light

2. Simple camera : The diagram below shows the structure of a simple camera. In the boxes
provided, write the names of the parts shown.

Lens Focusing Film drum

screw

Film

Shutter

Diaphragm

Diaphragm
adjustment ring
For each of the parts you have named, state its function.

Lens: to focus a sharp image onto the film

Film: to record the image
Diaphragm: to adjust the size of the aperture (control the brightness of image).
Shutter: to open and shut the camera so that the film is exposed only for a short time.

3. Slide projector : The diagram below shows the structure of a simple camera. In the boxes
provided, write the names of the parts shown
Screen
Projector
Concave Condenser
lens
mirror
slide

Light
source

Complete the ray diagram above to explain how the slide projector works.

28
 JPN Pahang Physics Module Form 4
Chapter 5 Light
4. Astronomical telescope :

Making of the astronomical telescope.

 The astronomical telescope consists of 2 (converging / diverging) lenses.

 The objective lens has focal length, fo and the eye lens has focal length, fe where ( fo <
fe / fo > fe ).
 The lenses are arranged such that the distance between the objective lens and the eye
lens is (fo – fe / fo + fe / fo x fe / fo/fe).

Parallel rays
from distant
object Objective lens Eye lens

Fo Fe

Image
at
infinity
Complete the ray diagram above to show how the astronomical telescope works.

Characteristics of image formed by an astronomical telescope:

 The first image formed by the objective lens is (virtual/real ; upright/inverted ;

diminished/magnified).
 The final image is (virtual/real ; upright/inverted ; diminished/magnified).

 The final image is located at ( Fo / Fe / infinity).

Magnifying Power (M) :

f 0
M=
f e

Exercise:

An astronomical telescope with high power of magnification can be built using eye lens of (long /
short) focal length and objective lens of (long / short) focal length.

29
 JPN Pahang Physics Module Form 4
Chapter 5 Light
5. The compound microscope :

Structure of the compound microscope:

 A compound microscope consists of 2 (converging / diverging) lenses

 The focal length of the eye lens is (long / short) and the focal length of the objective lens is
(long / short).
 The objective lens is arranged such that the object distance, u is (u = fo / fo < u < 2 fo / u
=2fo).
 The eye lens is used as a (magnifying / diverging / projector) lens.
 The total length, s, between both lenses is ( s = fo + fe ; s > fo+fe )

L0 Le
Eye
Object
Fo Fe

Image2

Complete the ray diagram above to show how the compound microscope works.

Characteristics of image formed by compound microscope:

 The first image formed by the objective lens is (real/virtual ; diminished/magnified ;

upright/inverted ).
 The final image is (real/virtual ; diminished/magnified ; upright/inverted ).

Exercise 1 (a) : A compound microscope consists of two lenses of focal lengths 2 cm and 10 cm.
Between them, which is more suitable as the eye lens? Explain your answer.

The 10 cm lens is used as the eye lens because it will make a shorter microscope.

(b): How would you arrange the lenses in (a) to make an astronomical telescope?

Use the 10 cm lens as the objective lens and the 2 cm lens as the eye lens.

30
 JPN Pahang Physics Module Form 4
Chapter 5 Light
Reinforcement:

Part A:

1. Between the following statements about reflection of light, which is not true?

A. All light energy incident on a plane mirror is reflected.

B. The angle of incidence is always the same as the angle of reflection.
C. The incident ray, the reflected ray and the normal to the point of incidence, all lie on the
same plane.
D. The speed of the reflected ray is the same as the speed of the incident ray.

2. A boy stands in front of a plane mirror. He observes the image of some letterings printed on his
shirt. The letterings on his shirt is as shown in Figure 1.

Figure 1

Between the following images, which is the image observed by the boy?
A B C D

3. Figure 2 shows an object, O placed in front of a plane mirror. Between the positions A, B, C
and D, which is the position of the image?

A B C D

Plane mirror
O
Figure 2

4. A student is moving with a velocity of 2 m s-1 towards a plane mirror. The distance between the
student and his image will move towards each other at the rate

A. 2 m s-1 B. 3 m s-1 C. 4 m s-1 D. 5 m s-1 E. 6 m s-1

5. The table below shows the characteristics of the images formed by a concave mirror for various
positions of the object. All symbols used have the usual meanings. Which of them is not true?

31
 JPN Pahang Physics Module Form 4
Chapter 5 Light

Position of object Characteristics of image

A u > 2f Diminished, inverted, real
B f < u < 2f Magnified, inverted, real
C u=f Same size, inverted, real
D u<f Maginfied, upright, virtual

6. Which of the following ray diagram is correct?

A B C

50o
50o
C F C F

Plane mirror Convex mirror Concave mirror

7. The depth of a swimming pool appears to be less than its actual depth. The light phenomenon
which causes this is

A. Reflection
B. Refraction
C. Diffraction
D. Interference

8. The critical angle in glass is 42o. What is the refractive index of glass?

A. 1.2 B. 1.3 C. 1.4 D. 1.5 E. 1.6

9. Which of the following are the characteristics of an image formed by a magnifying glass?

A. Magnified, virtual, inverted

B. Diminished, real, upright
C. Magnified, virtual, upright
D. Diminished, virtual, inverted

32
 JPN Pahang Physics Module Form 4
Chapter 5 Light
10. A student is given three convex lenses of focal lengths 2 cm, 10 cm and 50 cm. He wishes to
construct a powerful astronomical telescope. Which of the following arrangements should he
choose?

Focal length of objective lens / cm Focal length of eye lens / cm

A 50 2
B 10 10
C 2 50
D 50 10

Part B

1.
Eye

air

water
Image

Figure 3

Figure 3 shows the eye of a person looking at a fish.

a) Sketch a ray diagram consisting of 2 rays originating from the eye of the fish to show why the
image of the fish is seen closer to the surface.

b) The fish is at a depth of 2 m. If the refractive index of water is 1.33, calculate the apparent
depth of the fish.

real depth
n
apparent depth
2
1.33 
apparent depth

Apparent depth = 1.5 m

33
 JPN Pahang Physics Module Form 4
Chapter 5 Light
2.
1 1 1
a) Starting with the lens formula, u  v  f , derive an equation that gives the relationship
between liner magnification, m and the image distance, v. Hence sketch the graph of m against v on
the axes provided below.

v v v
 
u v f
v
m 1 
f
1
m  v 1
f

v
0

-1

(b) State the value of m at the point of intersection of the graph with the vertical axis.

-1

(c) Describe how you would determine the focal length of the lens using the graph.

The gradient of the graph gives the value of 1/f

1
Therefore f  gradient of graph

Part C

34
 JPN Pahang Physics Module Form 4
Chapter 5 Light
1.

A student used a slide projector to project a picture onto the screen. Figure 1a and 1b show the
relative positions of the slide, projector lens and the screen.
It is observed that when the screen is moved further away (Figure 1b), the lens of the projector has
to be moved nearer to the slide to obtain a sharp image.

Projector
lens
Screen
Slide
image

Figure 1a

Projector
lens
Screen
Slide

image

Figure 1b

Based on your observations and knowledge of lenses;

a) make one suitable inference.

The image distance is dependent on the object distance

b) state an appropriate hypothesis that could be investigated.

The greater the object distance, the smaller the image distance

c) describe how you would design an experiment to test your hypothesis using a convex lens,
filament bulb and other apparatus.
In your description, state clearly the following:

(i) aim of the experiment

To investigate the relationship between object distance and image distance for a convex lens.

(ii) variables in the experiment

35
JPN Pahang Physics Module Form 4
Chapter 5 Light
Manipulated variable: object distance.
Response variable: image distance.
Fixed variable: focal length of lens.

(iii) List of apparatus and materials

Apparatus: light bulb, convex lens of focal length 10 c , white screen, metre rule, low
voltage power supply and lens holder

(iv) Arrangement of the apparatus

Object Image
distance distance

bulb screen
lens

Lens holder
Meter rule

Low voltage power supply

(v) The procedure of the experiment, which includes the method of controlling the manipulated
variable and the method of measuring the responding variable

Procedure: 1. Arrange the apparatus as shown in the diagram above.

2. Adjust the bulb so that the object distance (filament), u is 35 cm from
the lens.
3. Light up the electric bulb, adjust the screen position until a sharp image
of the filament is formed on the screen. Record the image distance, v.
4. Repeat steps 2 and 3 for objects distances of, u = 30cm, 25 cm, 20 cm,
and 15 cm.

(vi) The way you tabulate the data

Object distance, Image distance,

u /cm v /cm
35.0
30.0
25.0
20.0
15.0

(vii) The way you would analyse the data

36
 JPN Pahang Physics Module Form 4
Chapter 5 Light
Plot the graph of v against u

2.
A student carried out an experiment to investigate the relationship between object distance, u,
and image distance, v, for a convex lens. The student used various values of u and recorded the
corresponding values of v. The student then plotted the graph of uv against u + v as shown in
Figure 2.

uv/ cm2

500

450

400

350

300

250

200

150

100

50

10 20 30 40 50
u + v / cm
Figure 2

a) Based on the graph in Figure 2,

37
 JPN Pahang Physics Module Form 4
Chapter 5 Light

(i) state the relationship between uv and u + v

uv is directly proportional to (u + v)
…………………………………………………………………………………………
[1 mark]
(ii) determine the value of u + v when the value of uv = 400 cm2. Show on the graph how
you obtained the value of u + v.

40 cm
From the value of u + v obtained, calculate the image distance, v when u = 20 cm.

20 + v = 40
v = 20 cm

[3 marks]
(iii) calculate the gradient of the graph. Show clearly on the graph how you obtained the
values needed for the calculation.

Gradient = 400/40
= 10 cm
[3 marks]

b) Given that the relationship between u, v and focal length, f of the convex lens used, is
represented by the equation
1 + 1 = 1
u v f
Derive an equation which gives the relationship between uv and (u + v ).

vu 1

uv f

uv  f  u  v 

[2 marks]

c) Using the equation derived in (b), and the value of gradient calculated in (a)(iii), determine the
focal length of the lens used in the experiment.

The gradient = f
Therefore f = 10 cm
[2 marks]

d) State one precaution taken to ensure the accuracy of the experiment.

The ………………………………………………………………………………………[1
object (lamp), lens and the screen must be arranged in a straight line mark]
perpendicular to the screen

38