Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Ir 2213

Download as pdf or txt
Download as pdf or txt
You are on page 1of 14

Preliminary Data Sheet No. PD60030 rev.

IR2213(S) & (PbF)


HIGH AND LOW SIDE DRIVER
Features
Floating channel designed for bootstrap operation
Fully operational to +1200V Tolerant to negative transient voltage dV/dt immune Gate drive supply range from 12 to 20V Undervoltage lockout for both channels 3.3V logic compatible Separate logic supply range from 3.3V to 20V Logic and power ground 5V offset CMOS Schmitt-triggered inputs with pull-down Cycle by cycle edge-triggered shutdown logic Matched propagation delay for both channels Outputs in phase with inputs Also available LEAD-FREE (PbF)

Product Summary
VOFFSET IO+/VOUT ton/off (typ.) Delay Matching 1200V max. 1.7A / 2A 12 - 20V 280 & 225 ns 30 ns

Packages

Description
The IR2213(S) is a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels. Proprietary 16-Lead SOIC HVIC and latch immune CMOS technologies enable (wide body) ruggedized monolithic construction. Logic inputs are 14-Lead PDIP compatible with standard CMOS or LSTTL outputs, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 1200 volts.

Typical Connection
HO V DD HIN SD LIN V SS V CC V DD HIN SD LIN V SS V CC COM LO VB VS

up to 1200V

TO LOAD

(Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical connections only. Please refer to our Application Notes and DesignTips for proper circuit board layout.

www.irf.com

IR2213(S) & (PbF)


Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The Thermal Resistance and Power Dissipation ratings are measured under board mounted and still air conditions.

Symbol
VB VS VHO VCC VLO VDD VSS VIN dVs/dt PD RTHJA TJ TS TL

Definition
High Side Floating Supply Voltage High Side Floating Supply Offset Voltage High Side Floating Output Voltage Low Side Fixed Supply Voltage Low Side Output Voltage Logic Supply Voltage Logic Supply Offset Voltage Logic Input Voltage (HIN, LIN & SD) Allowable Offset Supply Voltage Transient (Figure 2) Package Power Dissipation @ TA +25C Thermal Resistance, Junction to Ambient Junction Temperature Storage Temperature Lead Temperature (Soldering, 10 seconds) (14 Lead PDIP) (16 Lead SOIC) (14 Lead PDIP) (16 Lead SOIC)

Min.
-0.3 VB - 25 VS - 0.3 -0.3 -0.3 -0.3 VCC - 25 VSS - 0.3 -55

Max.
1225 VB + 0.3 VB + 0.3 25 VCC + 0.3 VSS + 25 VCC + 0.3 VDD + 0.3 50 1.6 1.25 75 100 125 150 300

Units

V/ns W C/W

Recommended Operating Conditions


The Input/Output logic timing diagram is shown in Figure 1. For proper operation the device should be used within the recommended conditions. The VS and VSS offset ratings are tested with all supplies biased at 15V differential.

Symbol
VB VS VHO VCC VLO VDD VSS VIN

Definition
High Side Floating Supply Absolute Voltage High Side Floating Supply Offset Voltage High Side Floating Output Voltage Low Side Fixed Supply Voltage Low Side Output Voltage Logic Supply Voltage Logic Supply Offset Voltage Logic Input Voltage (HIN, LIN & SD)

Min.
VS + 12 Note 1 VS 12 0 VSS + 3 -5 (Note 2) VSS

Max.
VS + 20 1200 VB 20 VCC VSS + 20 5 VDD

Units

Note 1: Logic operational for VS of -5 to +1200V. Logic state held for VS of -5V to -VBS. (Please refer to the Design Tip DT97-3 for more details). Note 2: When VDD<5V, the minimum VSS offset is limited to -VDD

www.irf.com

IR2213(S) & (PbF)


Dynamic Electrical Characteristics
VBIAS (VCC, VBS, VDD) = 15V, CL = 1000 pF, TA = 25C and VSS = COM unless otherwise specified. The dynamic electrical characteristics are measured using the test circuit shown in Figure 3.

Symbol
ton toff tsd tr tf MT

Definition
Turn-On Propagation Delay Turn-Off Propagation Delay Shutdown Propagation Delay Turn-On Rise Time Turn-Off Fall Time Delay Matching, HS & LS Turn-On/Off

Min. Typ. Max. Units Test Conditions


280 225 230 25 17 30 VS = 0V VS = 1200V VS = 1200V

ns

Static Electrical Characteristics


VBIAS (VCC, VBS, VDD) = 15V, TA = 25C and VSS = COM unless otherwise specified. The VIN, VTH and IIN parameters are referenced to VSS and are applicable to all three logic input leads: HIN, LIN and SD. The VO and IO parameters are referenced to COM and are applicable to the respective output leads: HO or LO.

Symbol
VIH VIL VOH VOL ILK IQBS IQCC IQDD IIN+ IINVBSUV+ VBSUVVCCUV+ VCCUVIO+ IO-

Definition
Logic 1 Input Voltage Logic 0 Input Voltage High Level Output Voltage, VBIAS - VO Low Level Output Voltage, VO Offset Supply Leakage Current Quiescent VBS Supply Current Quiescent VCC Supply Current Quiescent VDD Supply Current Logic 1 Input Bias Current Logic 0 Input Bias Current VBS Supply Undervoltage Positive Going Threshold VBS Supply Undervoltage Negative Going Threshold VCC Supply Undervoltage Positive Going Threshold VCC Supply Undervoltage Negative Going Threshold Output High Short Circuit Pulsed Current Output Low Short Circuit Pulsed Current

Min. Typ. Max. Units Test Conditions


9.5 8.7 7.9 8.7 7.9 1.7 2.0 125 180 15 20 10.2 9.3 10.2 9.3 2.0` 2.5 6.0 1.2 0.1 50 230 340 30 40 1.0 11.7 10.7 11.7 10.7 A VO = 0V, VIN = VDD PW 10 s VO = 15V, VIN = 0V PW 10 s V A V IO = 0A IO = 0A VB = VS = 1200V VIN = 0V or VDD VIN = 0V or VDD VIN = 0V or VDD VIN = VDD VIN = 0V

www.irf.com

IR2213(S) & (PbF)


Functional Block Diagram
VB VDD R Q S HIN
HV LEVEL SHIFT

UV DETECT PULSE FILTER

R R S

Q HO

VDD /VCC LEVEL SHIFT

PULSE GEN

VS

SD UV DETECT

VCC VDD /VCC LEVEL SHIFT

LIN R Q VSS S

LO DELAY COM

Lead Definitions
Symbol Description
VDD HIN SD LIN VSS VB HO VS VCC LO COM Logic supply Logic input for high side gate driver output (HO), in phase Logic input for shutdown Logic input for low side gate driver output (LO), in phase Logic ground High side floating supply High side gate drive output High side floating supply return Low side supply Low side gate drive output Low side return

Lead Assignments

14 Lead PDIP

16 Lead SOIC (Wide Body)

IR2213 Part Number


4

IR2213S

www.irf.com

IR2213(S) & (PbF)


HV =10 to 1200V

<50 V/ns

Figure 1. Input/Output Timing Diagram

Figure 2. Floating Supply Voltage Transient Test Circuit

HIN LIN
(0 to 1200V)

50%

50%

ton

tr 90%

toff 90%

tf

HO LO
Figure 3. Switching Time Test Circuit

10%

10%

Figure 4. Switching Time Waveform Definition

50%

HIN LIN

50%

50%

SD
tsd 90%
MT

LO

HO
10% MT 90%

HO LO

LO
Figure 5. Shutdown Waveform Definitions

HO

Figure 6. Delay Matching Waveform Definitions

www.irf.com

IR2213(S) & (PbF)

100

100

80 Turn-On Rise Time (ns) Turn-On Rise Time (ns)

80

60

60
Max.

40
M ax. Typ.

40
Typ.

20

20

0 -50 -25 0 25 50 75 100 125 Temperature (C)

0 10 12 14 16 18 20 VBIAS Supply Voltage (V)

Figure 10A. Turn-On Rise Time vs. Temperature


50 50

Figure 10B. Turn-On Rise Time vs. Voltage

40 Turn-Off Fall Time (ns) Turn-Off Fall Time (ns)

40

30
Max.

30

20
Typ.

20
Max. Typ.

10

10

0 -50 -25 0 25 50 75 100 125 Temperature (C)

0 10 12 14 16 18 20 VBIAS Supply Voltage (V)

Figure 11A. Turn-Off Fall Time vs. Temperature


15.0

Figure 11B. Turn-Off Fall Time vs. Voltage


15
Logic " 1" Input Threshold (V)

12.0 Logic "1" Input Threshold (V)


Min.

12 Max. 9 6 3 0

9.0

6.0

3.0

0.0 -50 -25 0 25 50 75 100 125 Temperature (C)

10 12

14

16

18

20

VDD Logic Supply Voltage (V)

Figure 12A. Logic 1 Input Threshold vs. Temperature

Figure 12B. Logic 1 Input Threshold vs. Voltage

www.irf.com

IR2213(S) & (PbF)


15.0

15 12
Logic "0" Input Threshold (V)

12.0 Logic "0" Input Threshold (V)

9.0

9 6 3 0 Min.

6.0

Max.

3.0

0.0 -50 -25 0 25 50 75 100 125 Temperature (C)

10 12

14

16

18

20

VDD Logic Supply Voltage (V)

Figure 13A. Logic 0 Input Threshold vs. Temperature

Figure 13B. Logic 0 Input Threshold vs. Voltage

5.00

5.00

4.00 High Level Output Voltage (V) High Level Output Voltage (V)

4.00

3.00

3.00

2.00
Max.

2.00
M ax.

1.00

1.00

0.00 -50 -25 0 25 50 75 100 125 Temperature (C)

0.00 10 12 14 16 18 20 VBIAS Supply Voltage (V)

Figure 14A. High Level Output vs. Temperature


1.00 1.00

Figure 14B. High Level Output vs. Voltage

0.80 Low Level Output Voltage (V) Low Level Output Voltage (V)
Max.

0.80

0.60

0.60

0.40

0.40

0.20

0.20
M ax.

0.00 -50 -25 0 25 50 75 100 125 Temperature (C)

0.00 10 12 14 16 18 20 VBIAS Supply Voltage (V)

Figure 15A. Low Level Output vs. Temperature

Figure 15B. Low Level Output vs. Voltage

www.irf.com

IR2213(S) & (PbF)


500 500

Offset Supply Leakage Current (A)

300

Offset Supply Leakage Current (A)

400

400

300

200

200

100
Max.

100
Max.

0 -50 -25 0 25 50 75 100 125 Temperature (C)

200

400

600

800

1000

1200

VB Boost Voltage (V)

Figure 16A. Offset Supply Current vs. Temperature


500

Figure 16B. Offset Supply Current vs. Voltage


500

400 VBS Supply Current (A) VBS Supply Current (A)

400

300
Max.

300

200
Typ.

200
Max.

100

100

Typ.

0 -50 -25 0 25 50 75 100 125 Temperature (C)

0 10 12 14 16 18 20 VBS Floating Supply Voltage (V)

Figure 17A. VBS Supply Current vs. Temperature

Figure 17B. VBS Supply Current vs. Voltage


625

625

500 VCC Supply Current (A) VCC Supply Current (A)

500

375
Max.

375

250
Typ.

250
Max.

125

125

Typ.

0 -50 -25 0 25 50 75 100 125 Temperature (C)

0 10 12 14 16 18 20 VCC Fixed Supply Voltage (V)

Figure 18A. VCC Supply Current vs. Temperature

Figure 18B. VCC Supply Current vs. Voltage

www.irf.com

IR2213(S) & (PbF)


100

60 50
VDD Supply Current (A)

80 VDD Supply Current (A)

40 30 20 10
typ. max

60

40
Max.

20
Typ.

0
0 -50 -25 0 25 50 75 100 125 Temperature (C)

10 12 14 16 18 20

VDD Logic Supply Voltage (V)

Figure 19A. VDD Supply Current vs. Temperature


100
Logic 1 Input Bias Current (A)

Figure 19B. VDD Supply Current vs. VDD Voltage


60 50 40 30 20 10 0
max

Logic "1" Input Bias Current (A)

80

60

40
Max.

20
Typ.

typ.

0 -50 -25 0 25 50 75 100 125 Temperature (C)

10 12

14

16

18

20

VDD Logic Supply Voltage (V)

Figure 20A. Logic 1 Input Current vs. Temperature

Figure 20B. Logic 1 Input Current vs. VDD Voltage

5.00
Logic 0 Input Bias Current (A)

5 4 3 2 1 0
max

Logic "0" Input Bias Current (A)

4.00

3.00

2.00

1.00

Max.

0.00 -50 -25 0 25 50 75 100 125 Temperature (C)

10 12

14 16

18 20

VDD Logic Supply Voltage (V)

Figure 21A. Logic 0 Input Current vs. Temperature

Figure 21B. Logic 0 Input Current vs. VDD Voltage

www.irf.com

IR2213(S) & (PbF)

0.0

20.0

VS Offset Supply Voltage (V)

Typ.

-6.0

VSS Logic Supply Offset Voltage (V)

-3.0

16.0

12.0

-9.0

8.0

Typ.

-12.0

4.0

-15.0 10 12 14 16 18 20 VBS Floating Supply Voltage (V)

0.0 10 12 14 16 18 20 VCC Fixed Supply Voltage (V)

Figure 22. Maximum VS Negative Offset vs. VBS Supply Voltage

Figure 23. Maximum VSS Positive Offset vs. VCC Supply Voltage

65 55

65 55
300v 200v

45 35 25 15 0.1

200v 1 00v 0v

300v

Temperature ( C)

Temperature ( C)

45 35 25 15 0.1

1 00v 0v

10

100

10

100

Frequency (KHZ)

Frequency (KHZ)

Figure 24. IR2213s vs. Frequency (IRFBC20) Rgate=33 , V CC=15V

Figure 25. IR2213s vs. Frequency (IRFBC30) Rgate=22 , V CC=15V

10

www.irf.com

IR2213(S) & (PbF)

75 75 65
o Temperature ( C)

65 Temperature oC) (
300v 200v 100v 0v

300v 200v 100v 0v

55 45 35 25 15

55 45 35 25 15 0.1 1 10

100

0.1

10

100

Frequency (KHZ)

Frequency (KHZ)

Figure 26. IR2213s vs. Frequency (IRFBC40) Rgate=15 , V CC=15V

Figure 27. IR2213s vs. Frequency (IRFBC50) Rgate=10 , V CC=15V

65
o Temperature ( C)

65 55 Temperature oC) (
300v 200v 100v 0v

55 45 35 25 15 0.1 1 10 100 Frequency (KHZ)

45 35 25 15 0.1 1 10

300v 200v 100v 0v

100

Frequency (KHZ)

Figure 28. IR2213 vs. Frequency (IRFBC20) Rgate=33 , V CC=15V

Figure 29. IR2213 vs. Frequency (IRFBC30) Rgate=22 , V CC=15V

www.irf.com

11

IR2213(S) & (PbF)

75 65
o Temperasture ( C)

75 65
o Temperature ( C) 300v 200v 100v 0v

55 45 35 25 15 0.1 1 10

55 45 35 25 15

300v 200v 100v 0v

100

0.1

10

100

Frequency (KHZ)

Frequency (KHZ)

Figure 30. IR2213 vs. Frequency (IRFBC40) Rgate=15 , V CC=15V

Figure 31. IR213 vs. Frequency (IRFBC50) Rgate=10 , V CC=15V

12

www.irf.com

IR2213(S) & (PbF)

Case outlines

14-Lead PDIP

01-6010 01-3002 03 (MS-001AC)

16-Lead SOIC (wide body)


www.irf.com

01 6015 01-3014 03 (MS-013AA)

13

IR2213(S) & (PbF)

LEADFREE PART MARKING INFORMATION


Part number

IRxxxxxx YWW? ?XXXX


Lot Code (Prod mode - 4 digit SPN code) IR logo

Date code

Pin 1 Identifier ? P MARKING CODE Lead Free Released Non-Lead Free Released

Assembly site code Per SCOP 200-002

ORDER INFORMATION
Basic Part (Non-Lead Free) 8-Lead PDIP IR2181 order IR2181 8-Lead SOIC IR2181S order IR2181S 14-Lead PDIP IR21814 order IR21814 14-Lead SOIC IR21814 order IR21814S Leadfree Part 8-Lead PDIP IR2181 order IR2181PbF 8-Lead SOIC IR2181S order IR2181SPbF 14-Lead PDIP IR21814 order IR21814PbF 14-Lead SOIC IR21814 order IR21814SPbF

Thisproduct has been designed and qualified for the industrial market. Qualification Standards can be found on IRs Web Site http://www.irf.com Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 9/21/2004

14

www.irf.com

You might also like