Data Sheet No. PD60147 rev.

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF HIGH AND LOW SIDE DRIVER

Features
Floating channel designed for bootstrap operation
Fully operational to +500V or +600V Tolerant to negative transient voltage dV/dt immune Gate drive supply range from 10 to 20V Undervoltage lockout for both channels 3.3V logic compatible Separate logic supply range from 3.3V to 20V Logic and power ground 5V offset CMOS Schmitt-triggered inputs with pull-down Cycle by cycle edge-triggered shutdown logic Matched propagation delay for both channels Outputs in phase with inputs

Product Summary
VOFFSET (IR2110) (IR2113) IO+/VOUT ton/off (typ.) 500V max. 600V max. 2A / 2A 10 - 20V 120 & 94 ns

Delay Matching (IR2110) 10 ns max. (IR2113) 20ns max.

Packages

Description
The IR2110/IR2113 are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output chan16-Lead SOIC nels. Proprietary HVIC and latch immune CMOS technologies enable 14-Lead PDIP IR2110S/IR2113S ruggedized monolithic construction. Logic inputs are compatible with IR2110/IR2113 standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 500 or 600 volts.

Typical Connection
HO VDD HIN SD LIN V SS VCC VDD HIN SD LIN VSS VCC COM LO VB VS

up to 500V or 600V

TO LOAD

(Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical connections only. Please refer to our Application Notes and DesignTips for proper circuit board layout.

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Additional information is shown in Figures 28 through 35.

Symbol
VB VS VHO VCC VLO VDD VSS VIN dVs/dt PD RTHJA TJ TS TL

Definition
High side floating supply voltage (IR2110) (IR2113) High side floating supply offset voltage High side floating output voltage Low side fixed supply voltage Low side output voltage Logic supply voltage Logic supply offset voltage Logic input voltage (HIN, LIN & SD) Allowable offset supply voltage transient (figure 2) Package power dissipation @ TA +25C Thermal resistance, junction to ambient Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) (14 lead DIP) (16 lead SOIC) (14 lead DIP) (16 lead SOIC)

Min.
-0.3 -0.3 VB - 25 VS - 0.3 -0.3 -0.3 -0.3 VCC - 25 VSS - 0.3 -55

Max.
525 625 VB + 0.3 VB + 0.3 25 VCC + 0.3 VSS + 25 VCC + 0.3 VDD + 0.3 50 1.6 1.25 75 100 150 150 300

Units

V/ns W C/W

Recommended Operating Conditions

The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recommended conditions. The VS and VSS offset ratings are tested with all supplies biased at 15V differential. Typical ratings at other bias conditions are shown in figures 36 and 37.

Symbol
VB VS VHO VCC VLO VDD VSS VIN TA

Definition
High side floating supply absolute voltage High side floating supply offset voltage High side floating output voltage Low side fixed supply voltage Low side output voltage Logic supply voltage Logic supply offset voltage Logic input voltage (HIN, LIN & SD) Ambient temperature (IR2110) (IR2113)

Min.
VS + 10 Note 1 Note 1 VS 10 0 VSS + 3 -5 (Note 2) VSS -40

Max.
VS + 20 500 600 VB 20 VCC VSS + 20 5 VDD 125

Units

Note 1: Logic operational for VS of -4 to +500V. Logic state held for VS of -4V to -VBS. (Please refer to the Design Tip DT97-3 for more details). Note 2: When VDD < 5V, the minimum VSS offset is limited to -VDD.

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF
Dynamic Electrical Characteristics
VBIAS (VCC, VBS, VDD) = 15V, CL = 1000 pF, TA = 25C and VSS = COM unless otherwise specified. The dynamic electrical characteristics are measured using the test circuit shown in Figure 3.

Symbol
ton toff tsd tr tf MT

Definition
Turn-on propagation delay Turn-off propagation delay Shutdown propagation delay Turn-on rise time Turn-off fall time Delay matching, HS & LS turn-on/off (IR2110) (IR2113)

Figure Min. Typ. Max. Units Test Conditions

7 8 9 10 11 120 94 110 25 17 150 125 140 35 25 10 20 VS = 0V VS = 500V/600V VS = 500V/600V

ns

Static Electrical Characteristics

VBIAS (VCC, VBS, VDD) = 15V, TA = 25C and VSS = COM unless otherwise specified. The VIN, VTH and IIN parameters are referenced to VSS and are applicable to all three logic input leads: HIN, LIN and SD. The VO and IO parameters are referenced to COM and are applicable to the respective output leads: HO or LO.

Symbol
VIH VIL VOH VOL ILK IQBS IQCC IQDD IIN+ IINVBSUV+ VBSUVVCCUV+ VCCUVIO+ IO-

Definition
Logic 1 input voltage Logic 0 input voltage High level output voltage, VBIAS - VO Low level output voltage, VO Offset supply leakage current Quiescent VBS supply current Quiescent VCC supply current Quiescent VDD supply current Logic 1 input bias current Logic 0 input bias current VBS supply undervoltage positive going threshold VBS supply undervoltage negative going threshold VCC supply undervoltage positive going threshold VCC supply undervoltage negative going threshold Output high short circuit pulsed current Output low short circuit pulsed current

Figure Min. Typ. Max. Units Test Conditions

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 9.5 7.5 7.0 7.4 7.0 2.0 2.0 125 180 15 20 8.6 8.2 8.5 8.2 2.5 2.5 6.0 1.2 0.1 50 230 340 30 40 1.0 9.7 9.4 9.6 V 9.4 A VO = 0V, VIN = VDD PW 10 s VO = 15V, VIN = 0V PW 10 s A V IO = 0A IO = 0A VB=VS = 500V/600V VIN = 0V or VDD VIN = 0V or VDD VIN = 0V or VDD VIN = VDD VIN = 0V

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF

Functional Block Diagram

VB VDD R Q S HIN
HV LEVEL SHIFT

UV DETECT PULSE FILTER

R R S

Q HO

VDD /VCC LEVEL SHIFT

PULSE GEN

VS

SD UV DETECT

VCC VDD /VCC LEVEL SHIFT

LIN R Q VSS S

LO DELAY COM

Lead Definitions
Symbol Description
VDD HIN SD LIN VSS VB HO VS VCC LO COM Logic supply Logic input for high side gate driver output (HO), in phase Logic input for shutdown Logic input for low side gate driver output (LO), in phase Logic ground High side floating supply High side gate drive output High side floating supply return Low side supply Low side gate drive output Low side return

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF

Lead Assignments

14 Lead PDIP

16 Lead SOIC (Wide Body)

IR2110/IR2113

IR2110S/IR2113S

14 Lead PDIP w/o lead 4

14 Lead PDIP w/o leads 4 & 5

IR2110-1/IR2113-1 Part Number

IR2110-2/IR2113-2

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF
Vcc =15V 10KF6 10 F 0.1 F 9 10 11 12 13 2 IRF820 0.1 F 5 7 1 OUTPUT 10KF6 MONITOR 200 H + 10KF6 100F HV = 10 to 500V/600V

HO

dVS >50 V/ns dt

Figure 1. Input/Output Timing Diagram

Figure 2. Floating Supply Voltage Transient Test Circuit

Vcc =15V VB + 10 15V F V S (0 to 500V/600V) 10 F

10 F

0.1 F

9 10 11 12 13

6 5 7 1 CL CL

0.1 F HO LO

HIN LIN
ton

50%

50%

HIN SD LIN

tr 90%

toff 90%

tf

HO LO

10%

10%

Figure 3. Switching Time Test Circuit

Figure 4. Switching Time Waveform Definition

HIN LIN
50%

50%

50%

SD
tsd

LO

HO
10%

HO LO

90%
MT 90% MT

LO
Figure 5. Shutdown Waveform Definitions

HO

Figure 6. Delay Matching Waveform Definitions

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF

250

250

200 Turn-On Delay Time (ns) Turn-On Delay Time (ns)

200

Max.

150
Max.

150

Typ.

100

Typ.

100

50

50

0 -50 -25 0 25 50 75 100 125 Temperature (C)

0 10 12 14 16 18 20

VCC/VBS Supply Voltage (V)

Figure 7A. Turn-On Time vs. Temperature

Figure 7B. Turn-On Time vs. VCC/VBS Supply Voltage

250

250 200
Turn-On Delay Time (ns)

Max.
Turn-Off Delay Time (ns)

200

150 100 50 0 0

Typ.

150
Max. Typ.

100

50

10 12 14 16 18 20

0 -50 -25 0 25 50 75 100 125 Temperature (C)

VDD Supply Voltage (V)

Figure 7C. Turn-On Time vs. VDD Supply Voltage

250

Figure 8A. Turn-Off Time vs. Temperature

250 200
Turn-Off Delay Time (ns)

200 Turn-Off Delay Time (ns)

Max.

Max.

150
Typ.

150 100 50 0

100

Typ

50

0 10 12 14 16 18 20

10 12 14 16 18 20

VCC/VBS Supply Voltage (V)

VDD Supply Voltage (V)

Figure 8B. Turn-Off Time vs. VCC/VBS Supply Voltage

Figure 8C. Turn-Off Time vs. VDD Supply Voltage

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF

250

250

200 Shutdown Delay Time (ns) Shutdown Delay time (ns)

200
Max.

150
Max.

150

Typ.

100

Typ.

100

50

50

0 -50 -25 0 25 50 75 100 125 Temperature (C)

0 10 12 14 16 18 20

VCC/VBS Supply Voltage (V)

Figure 9A. Shutdown Time vs. Temperature

250 Shutdown Delay Time (ns) 200 150 100 50 0 0 2 4 6 8 10 12 14 16 VDD Supply Voltage (V) 18 20

Figure 9B. Shutdown Time vs. VCC/VBS Supply Voltage

100

Max .
Turn-On Rise Time (ns)

80

60

Typ

40
M ax. Typ.

20

0 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 9C. Shutdown Time vs. VDD Supply Voltage

100

Figure 10A. Turn-On Rise Time vs. Temperature

50

80 Turn-On Rise Time (ns) Turn-Off Fall Time (ns)

40

60
Max.

30
Max.

40
Typ.

20
Typ.

20

10

0 10 12 14 16 18 20 VBIAS Supply Voltage (V)

0 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 10B. Turn-On Rise Time vs. Voltage

Figure 11A. Turn-Off Fall Time vs. Temperature

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF

50

15.0

40 Logic "1" Input Threshold (V) Turn-Off Fall Time (ns)

12.0
Max Min.

30

9.0

20
Max. Typ.

6.0

10

3.0

0 10 12 14 16 18 20 VBIAS Supply Voltage (V)

0.0 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 11B. Turn-Off Fall Time vs. Voltage

15
Logic " 1" Input Threshold (V)

Figure 12A. Logic 1 Input Threshold vs. Temperature

15.0

12 9 6 3 0 0 2 4 6 8 10 12 14 16 18 20
VDD Logic Supply Voltage (V)

12.0 Logic "0" Input Threshold (V)

Max.

9.0

6.0

Max. Min.

3.0

0.0 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 12B. Logic 1 Input Threshold vs. Voltage

15 12
Logic "0" Input Threshold (V)

Figure 13A. Logic 0 Input Threshold vs. Temperature

5.00

4.00 High Level Output Voltage (V)

9 6 3 0 0 2 4 6 8 10 12 14 16 18 20
VDD Logic Supply Voltage (V)

3.00

Min.

2.00
Max.

1.00

0.00 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 13B. Logic 0 Input Threshold vs. Voltage

Figure 14A. High Level Output vs. Temperature

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF

5.00

1.00

4.00 High Level Output Voltage (V) Low Level Output Voltage (V)

0.80

3.00

0.60

2.00
M ax.

0.40

1.00

0.20
Max.

0.00 10 12 14 16 18 20 VBIAS Supply Voltage (V)

0.00 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 14B. High Level Output vs. Voltage

1.00

Figure 15A. Low Level Output vs. Temperature

500

0.60

Offset Supply Leakage Current (A)

M ax.

0.80 Low Level Output Voltage (V)

400

300

0.40

200

0.20

100
Max.

0.00 10 12 14 16 18 20 VBIAS Supply Voltage (V)

0 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 15B. Low Level Output vs. Voltage

500

Figure 16A. Offset Supply Current vs. Temperature

500

Offset Supply Leakage Current (A)

400 VBS Supply Current (A)

400

300

300
Max.

200

200
Typ.

100

Max.

100

0 0 100 200 300 400 V B Boost Voltage (V) 500 IR2110 600 IR2113

0 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 16B. Offset Supply Current vs. Voltage

Figure 17A. VBS Supply Current vs. Temperature

10

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF
500 625

400 VBS Supply Current (A) VCC Supply Current (A)

500

300

375
Max.

200
Max.

250
Typ.

100

Typ.

125

0 10 12 14 16 18 20 VBS Floating Supply Voltage (V)

0 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 17B. VBS Supply Current vs. Voltage

625

Figure 18A. VCC Supply Current vs. Temperature

100

500 VCC Supply Current (A) VDD Supply Current (A)

80

375

60

250
Max.

40
Max.

125

Typ.

20
Typ.

0 10 12 14 16 18 20 VCC Fixed Supply Voltage (V)

0 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 18B. VCC Supply Current vs. Voltage

Figure 19A. VDD Supply Current vs. Temperature

60 50 40 30 20 10 0 0 2 4 6 8 10 12 14 16 18 20
VDD Logic Supply Voltage (V)

100

Logic "1" Input Bias Current (A)

80

VDD Supply Current (A)

60

40
Max.

20
Typ.

0 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 19B. VDD Supply Current vs. VDD Voltage

Figure 20A. Logic 1 Input Current vs. Temperature

www.irf.com

11

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF
60
Logic 1 Input Bias Current (A)

5.00

50 40 30 20 10 0 0 2 4 6 8 10 12 14 16 18 20
Logic "0" Input Bias Current (A)

4.00

3.00

2.00

1.00

Max.

0.00 -50 -25 0 25 50 75 100 125 Temperature (C)

VDD Logic Supply Voltage (V)

Figure 20B. Logic 1 Input Current vs. VDD Voltage

Figure 21A. Logic 0 Input Current vs. Temperature

11.0

5
Logic 0 Input Bias Current (A)

4
VBS Undervoltage Lockout + (V)

10.0
Max.

3 2 1 0 0 2 4 6 8 10 12 14 16 18 20

9.0
Typ.

8.0
Min.

7.0

6.0 -50 -25 0 25 50 75 100 125 Temperature (C)

VDD Logic Supply Voltage (V)

Figure 21B. Logic 0 Input Current vs. VDD Voltage

Figure 22. VBS Undervoltage (+) vs. Temperature

11.0

11.0

VBS Undervoltage Lockout - (V)

VCC Undervoltage Lockout + (V)

10.0
Max.

10.0
Max.

9.0
Typ.

9.0
Typ.

8.0

8.0
Min.

7.0

Min.

7.0

6.0 -50 -25 0 25 50 75 100 125 Temperature (C)

6.0 -50 -25 0 25 50 75 100 125 Temperature (C)

Figure 23. VBS Undervoltage (-) vs. Temperature

Figure 24. VCC Undervoltage (+) vs. Temperature

12

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF
11.0 5.00

10.0 VCC Undervoltage Lockout - (V)

Max.

4.00 Output Source Current (A)

9.0
Typ.

3.00

Typ. Min.

8.0

2.00

7.0

Min.

1.00

6.0 -50 -25 0 25 50 75 100 125 Temperature (C)

0.00 -50

-25

25

50

75

100

125

Temperature (C)

Figure 25. VCC Undervoltage (-) vs. Temperature

5.00

Figure 26A. Output Source Current vs. Temperature

5.00

4.00 Output Source Current (A) Output Sink Current (A)

4.00

3.00

3.00

Typ. Min.

2.00
Typ.

2.00

1.00

Min.

1.00

0.00 10 12 14 16 18 20 VBIAS Supply Voltage (V)

0.00 -50

-25

25

50

75

100

125

Temperature (C)

Figure 26B. Output Source Current vs. Voltage

5.00

Figure 27A. Output Sink Current vs. Temperature

150
320V

4.00 Junction Temperature (C) Output Sink Current (A)

125
140V

100

3.00

75
10V

2.00
Typ.

50

1.00

Min.

25

0.00 10 12 14 16 18 20 VBIAS Supply Voltage (V)

0 1E+2 1E+3 1E+4 Frequency (Hz) 1E+5 1E+6

Figure 27B. Output Sink Current vs. Voltage

Figure 28. IR2110/IR2113 TJ vs. Frequency (IRFBC20) RGATE = 33, VCC = 15V

www.irf.com

13

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF
150 125
140V 320V

150 125 Junction Temperature (C) 100

320V

140V

Junction Temperature (C)

100 75
10V

10V

75 50 25 0 1E+2

50 25 0 1E+2

1E+3

1E+4 Frequency (Hz)

1E+5

1E+6

1E+3

1E+4 Frequency (Hz)

1E+5

1E+6

Figure 29. IR2110/IT2113 TJ vs. Frequency (IRFBC30) RGATE = 22, VCC = 15V
150 125 Junction Temperature (C) 100 75 50 25 0 1E+2
10V 320V 140V

Figure 30. IR2110/IR2113 TJ vs. Frequency (IRFBC40) RGATE = 15, VCC = 15V
150 125 Junction Temperature (C) 100 75 50 25 0 1E+2
10V 320V 140V

1E+3

1E+4 Frequency (Hz)

1E+5

1E+6

1E+3

1E+4 Frequency (Hz)

1E+5

1E+6

Figure 31. IR2110/IR2113 TJ vs. Frequency (IRFPE50) RGATE = 10, VCC = 15V
150 125 Junction Temperature (C) 100
10V 320V 140V

Figure 32. IR2110S/IR2113S TJ vs. Frequency (IRFBC20) RGATE = 33, VCC = 15V
150 125 Junction Temperature (C) 100 75 50 25 0 1E+2
320V 140V

10V

75 50 25 0 1E+2

1E+3

1E+4 Frequency (Hz)

1E+5

1E+6

1E+3

1E+4 Frequency (Hz)

1E+5

1E+6

Figure 33. IR2110S/IR2113S TJ vs. Frequency (IRFBC30) RGATE = 22, VCC = 15V

Figure 34. IR2110S/IR2113S TJ vs. Frequency (IRFBC40) RGATE = 15, VCC = 15V

14

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF

150 125 100 75 50 25 0 1E+2

320V 140V 10V

0.0

-2.0 VS Offset Supply Voltage (V)

Typ.

Junction Temperature (C)

-4.0

-6.0

-8.0

-10.0 1E+3 1E+4 Frequency (Hz) 1E+5 1E+6 10 12 14 16 18 20 VBS Floating Supply Voltage (V)

Figure 35. IR2110S/IR2113S TJ vs. Frequency (IRFPE50) RGATE = 10, VCC = 15V

Figure 36. Maximum VS Negative Offset vs. VBS Supply Voltage

20.0

VSS Logic Supply Offset Voltage (V)

16.0

12.0

8.0

Typ.

4.0

0.0 10 12 14 16 18 20 VCC Fixed Supply Voltage (V)

Figure 37. Maximum VSS Positive Offset vs. VCC Supply Voltage

www.irf.com

15

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF

Case Outlines

14-Lead PDIP

01-6010 01-3002 03 (MS-001AC)

14-Lead PDIP w/o Lead 4

16

01-6010 01-3008 02 (MS-001AC)

www.irf.com

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF

16 Lead PDIP w/o Leads 4 & 5

01-6015 01-3010 02

16-Lead SOIC (wide body)

www.irf.com

01 6015 01-3014 03 (MS-013AA)

17

IR2110(-1-2)(S)PbF/IR2113(-1-2)(S)PbF

LEADFREE PART MARKING INFORMATION

Part number

IRxxxxxx YWW? ?XXXX

Lot Code (Prod mode - 4 digit SPN code) IR logo

Date code

Pin 1 Identifier ? P MARKING CODE Lead Free Released Non-Lead Free Released

Assembly site code

ORDER INFORMATION
Part only available Lead Free 14-Lead 14-Lead 14-Lead 14-Lead 14-Lead 14-Lead 16-Lead 16-Lead PDIP IR2110 order IR2110PbF PDIP IR2110-1 order IR2110-1PbF PDIP IR2110-2 order IR2110-2PbF PDIP IR2113 order IR2113PbF PDIP IR2113-1 order IR2113-1PbF PDIP IR2113-2 order IR2113-2PbF SOIC IR2110S order IR2110SPbF SOIC IR2113S order IR2113SPbF

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 This product has been qualified per industrial level Data and specifications subject to change without notice 3/23/2005

18

www.irf.com