GE Circuit Breakers

GE Energy
EntelliGuard G Circuit Breakers

Dont compromise arc flash protection for system reliability.
imagination at work
The next chapter in the history of low-voltage circuit breakers

EntelliGuard G circuit breakers are the newest line of GE low-voltage circuit breakers, the next step in the evolution of a line known for its exceptional reliability and performance. They are available in 3- and 4-pole designs rated from 400A to 6000A, with fault interruption ratings up to 150kAIC. Integral to the EntelliGuard G breakers are the new, state-ofthe-art EntelliGuard TU Trip Units, which provide superior system protection, system reliability, monitoring and communications. The breaker-trip unit system delivers superior circuit protection without compromising either selectivity or arc flash protection. The EntelliGuard breaker-trip unit system demonstrates yet again GEs core competencies in reliable electric power distribution, circuit protection and personnel protection.
1882
First Arc Blast Arrester
1894
1918
1935
AE and AL Oilfilm Trip Devices
1946
AK-1 Breaker and EC-1 Trip Device
1955
AK-2 Stored Energy Design and EC-2 Trip Device
1960
AKD-5 Switchgear
1966
AK-3 Static Power Sensor Trip Breaker
1971
AKE, AKL Replacement D/O Breaker
First High First MetalVoltage, Oil Clad Immersed Switchgear Switch/Circuit Breaker
78 secondary disconnects combination terminals
Accessory windows Padlock provision
Retractable handle for manual spring charging
Detailed, factoryassembled side label EntelliGuard TU trip unit
Command close coil
Operating buttons: ON/OFF Breaker status contacts: OPEN/CLOSED Closing spring status: CHARGED/DISCHARGED
Rating plug
Optional factoryinstalled interlocks (mechanical or Kirk key)
Tamper-proof breaker label Complete, factory-assembled catalog number
Accessories
There are more than 20 different types of factory installed and loose accessories available for the EntelliGuard G circuit breaker. Whether its a bell alarm contact, key interlock or redundant shunt trips, we have the accessory combinations to meet your need! Factory-Installed Accessories Motor Operators Closing Devices Shunt Trip for Ground Fault UVR with Fixed Time Delay Second Shunt Trip or UV Release Auxiliary Switches & Contacts Bell Alarm & Trip Annunciation Trip Annunciation Breaker Mounted Key Interlocks Mechanical Interlocks Fixed Breakers Mechanical Interlocks Drawout Breakers Network Interlock
Shipped Loose Accessories Carriage Position Switch Coil Signaling Contact Module Contact Wear Indicator Door Interlock Electrical Close Switch Lock Kits Lifting Truck Mechanical Operation Counter Pushbutton Padlock Device Ready-to-Close Switch Secondary Disconnect Block Spring Charged Contact UVR Time Delay Modules Bell Alarm Contact
1977
AKD-6 Switchgear with AKR Breakers ECS, SST Solid State Trip Devices
1978
AKJ-50/T50 Replacement Breakers
1980
AKD-8 Switchgear and MVT-9 Trip Unit
1985
AKR-30S Breaker
1986
RMS9 and Epic Trip Units
1993
1994
1998
WavePro Breaker and AKD-10 Switchgear
2005
EntelliGuard Breaker and Entellisys Switchgear
2008
EntelliGuard G Breaker, EntelliGuard TU Trip Unit and AKD-20 Switchgear
Power Leader AKR-125 Products 5000A with MVT Breaker Plus and PM Trip Unit
Arc flash protection and selectivity

Now you dont have to choose
Reliable circuit and equipment protection has always been the circuit breakers primary purpose. Providing appropriate overcurrent protection while preserving selective coordination to maximize system reliability is the main goal of virtually every system designer. And that was once good enough. It isnt anymore. Modern economic reality and the regulatory environment demand system performance while recognizing the need to protect against the arc flash hazards that expose maintenance personnel to dangerous levels of heat, electrical energy, debris from damaged equipment and concussive forces. The challenge is to provide both better personnel protection by minimizing arc flash hazards and maintain electrical power to mission-critical loads. But these objectives often seem to conflict, pitting the speed and sensitivity required to optimize safety against the sequence of operations and interlocking required to maximize power system availability. The EntelliGuard G breaker-trip unit system meets the challenge. It achieves selectivity in a wide range of situations without excessive sacrifice of arc flash protection. With its Reduced Energy Let-through setting (RELT), the system protects at HRC1 or 2 for available fault currents as high as 100kA.
Fuse & Thermal CB curve Broad range of adjustment, even I2t slopes
Here are some of the ways that is accomplished: Multiple Short Time bands under 100ms optimally fit above the Instantaneous clearing times. Alternate Instantaneous setting (RELT) mitigates arc flash hazard while maintaining complete selectivity during normal operation. Remote activation can be safely achieved with off-the-shelf devices or, for networked systems, RELT can be activated via the communications port. RELT annunciation can be direct or indirect, either locally on the equipment or remotely via control devices or the industrial network. Adjustable ST and GF Zone Selective Interlocking optimizes restrained and unrestrained bands. Zone Selective Instantaneous protection, multiple zone protection, 3 cycle clearing and selectivity are provided simultaneously. Instantaneous trip adjusts up to 30X trip plug rating.
EntelliGuard TU Trip Unit

The EntelliGuard TU Trip Unit offers optimum circuit protection and system reliability simultaneously, with minimum compromise. Reliability and protection in one package, at the same time, all the time. In addition to arc flash protection and selectivity features, the EntelliGuard TU also includes many new innovative features: Availability to choose two different industry-recognized open communication protocols: Modbus RTU or Profibus DP. As the industrys only completely universal spare/replacement trip unit, it can be installed in any EntelliGuard G circuit breaker, regardless of frame size, sensor size, short circuit rating or standard (UL, ANSI). Patent pending. Time current curves compatible with traditional fuse curves, along with more and tighter breaker curves, ensure accurate coordination. Regardless of what mix of protective devices your system includes electronic trips, thermal magnetic circuit breakers or fuses the EntelliGuard TU has the right curve shape to fit your systems needs. Ground Fault curves compatible with common fuse ground fault curves. If you have fused feeders under the circuit breaker with the ground fault protection, you can optimize selectivity without giving up protection and still meet code-mandated requirements. The industrys only true Zone Selective Interlocking (ZSI) works with Ground Fault Protection (GFP), Short Time (ST) and Instantaneous (I), and includes the ability to set precise clearing times of each circuit breaker when restrained or unrestrained.
Fine adjustment exact delay No more No less
Fuse shaped GF for enhanced selectivity in all systems
EntelliGuard G short circuit & interrupting ratings

ANSI/UL1066
Interrupting Rating Tier ANSI/UL 1066 Devices, LVPCB Envelope 1 Type 254V 508V 635V 1/2S Withstand 400-1200 400-2000 S 65,000 65,000 50,000 50,000 X N 65,000 65,000 65,000 65,000 X H 85,000 85,000 65,000 65,000 X P 100,000 100,000 65,000 65,000 X E 85,000 85,000 85,000 85,000 M 100,000 100,000 100,000 85,000 B 100,000 100,000 100,000 100,000 L 150,000 150,000 100,000 100,000 Envelope 2 3200 400-3200 X Envelope 3 3200 4000-5000
X X X X
X X X
UL489
Interrupting Rating Tier UL 489 Devices, ICCB Type 240V 480V 600V 1/2S Withstand S 65,000 65,000 50,000 42,000 N 65,000 65,000 65,000 42,000 H 85,000 85,000 65,000 50,000 P 100,000 100,000 65,000 50,000 M 100,000 100,000 100,000 65,000 L 150,000 150,000 100,000 85,000 Envelope 1 400-1200 400-2000 X X X X Envelope 2 2500-3000 400-3000 X X X X X X Envelope 3 3000 4000-6000
Non-Automatic Circuit Breaker ANSI Version

Envelope 1 1 1 1 2 3 3 Type Amps S N N N M B B 800 800 1600 2000 3200 4000 5000 Rated Interrupting Current 42 42 42 42 65 100 100 Rated Endurance Minimum Mechanical Endurance 12,500 12,500 12,500 12,500 5,000 5,000 5,000 Minimum Electrical Endurance at 480V 10,000 10,000 10,000 7,500 5,000 3,000 2,000 Minimum Electrical Endurance at 600V 7,500 7,500 7,500 5,000 5,000 2,000 1,500
NOTE: GE internal quality testing requirements exceeded 20,000 mechanical and electrical operations.
Non-Automatic Circuit Breaker/Molded Case Switch UL Version

Envelope 1 1 1 1 1 2 3 3 3 Type Amps S S N N N M B B B 800 1200 800 1600 2000 3000 4000 5000 6000 Short Interrupting Current (kA) 42 42 42 42 42 65 100 100 100 Rated Endurance Minimum Mechanical Endurance 12,500 12,500 12,500 12,500 12,500 5,000 5,000 5,000 5,000 Minimum Electrical Endurance at 480V 10,000 10,000 10,000 10,000 7,500 5,000 3,000 3,000 1,500 Minimum Electrical Endurance at 600V 7,500 7,500 7,500 7,500 5,000 5,000 2,000 1,500 1,000
NOTE: GE internal quality testing requirements exceeded 20,000 mechanical and electrical operations.
DC Ratings
Envelope 2 Type M Amps 800-3000 Rated Endurance (Operations) Short Interrupting Minimum Mechanical Minimum Electrical Minimum Electrical Current (A) Endurance Endurance at 600 VDC Endurance at 1000 VDC 30,000 12,500 500 500
Real-time information. Real-people support.

Whether its on the web, on your own computer or on the phone, getting transactional answers, product information and technical support from GE is easy and sure. 1-800-GE1-STOP Based in Richmond, Virginia, our dedicated OEM customer service team gives you easy access to specific technical support. Just call 1-800-GE1-STOP. www.geelectrical.com/oem All of the technical documentation you need is available on our web site. The Publication Library delivers application guides, installation and maintenance instructions, brochures, layouts, dimensions and time current curves. GE Smart Catalogs Our BuyLog Catalog provides comprehensive data on all the products available from the Electrical Distribution business. Detailed ratings, catalog numbers, dimensions and weights, list prices and more. They automatically download updates as they become available. Order management the way you like it Speedi, our leading configuration, estimating and ordering tool is available to identify the correct catalog number and price to ensure you receive the product you need. EliteNet, GEs easyto-use web-based application, allows you to price, order, track and process returns. Paperless Electronic Data Interchange (EDI) is available to process purchase orders and invoices. Post sales support Call 1-888-GE-RESOLve for in-warranty service, genuine spare parts and GE field support services. 1,400 distributor locations When local contact is the answer, GEs authorized distributors meet your needs. With more than 500 different firms in over 1,400 locations, theres a local distributor near you, and specialist distributors address the needs of your target market segment. Find your nearest distributor easily at www.geindustrial.com.
EntelliGuard, WavePro, Entellisys, BuyLog and EliteNet are registered trademarks and Smart Catalogs is a trademark of the General Electric Company. GE Energy 41 Woodford Avenue Plainville, CT 06062 www.geindustrial.com/oem
imagination at work
DEA-462B (05/12)

GE Circuit Breakers

Uploaded by

Copyright:

Available Formats

GE Circuit Breakers

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GE Circuit Breakers

Uploaded by

Copyright:

Available Formats

What are the main features of the EntelliGuard G circuit breakers?

What are the main features of the EntelliGuard G circuit breakers?

How do the EntelliGuard G circuit breakers provide protection?

How do the EntelliGuard G circuit breakers provide protection?

GE Energy

EntelliGuard G Circuit Breakers

The next chapter in the history of low-voltage circuit breakers

78 secondary disconnects combination terminals

Accessory windows Padlock provision

Retractable handle for manual spring charging

Detailed, factoryassembled side label EntelliGuard TU trip unit

Command close coil

Optional factoryinstalled interlocks (mechanical or Kirk key)

Tamper-proof breaker label Complete, factory-assembled catalog number

Arc flash protection and selectivity

EntelliGuard TU Trip Unit

Fine adjustment exact delay No more No less

Fuse shaped GF for enhanced selectivity in all systems

EntelliGuard G short circuit & interrupting ratings

Non-Automatic Circuit Breaker ANSI Version

Non-Automatic Circuit Breaker/Molded Case Switch UL Version

Real-time information. Real-people support.

You might also like