WEIGHT CHANGES

HORSEPOWER Gross: 266 kW 357 HP @ 1900 rpm Net: 263 kW 353 HP @ 1900 rpm
Tipping load straight
Standard Boom

Tires or attachments

Operating weight kg lb 0 +900 +65 +70 +45 +120 0 +1985 +145 +155 +100 +265

Tipping load full turn

Standard Boom

Width over tires mm 0 3190 ft in 10'6"

Ground clearance mm 450 ft in 1'6"

Change in vertical dimensions mm 0 ft in 0

BUCKET CAPACITY 4.35.6 m3 5.6-7.3 yd3

kg 0 +1865 +33 +65 +60 +13

lb 0 +4110 +75 +145 +130 +30

kg 0 +1645 +30 +55 +50 +11

lb

29.5-25-22PR(L-3) Install additional counterweight Air conditioner Emergency steering Lock-up clutch torque converter ECCS (Electronically Controlled Suspension System)

+3625 +240 +120 +110 +24

WA500-6
WA

500
Radiator mask, lattice type Rearview mirror for cab Rear window washer and wiper ROPS/FOPS cab Seat, air-suspension type with reclining Service brakes, wet disc type Starting motor, 11.0 kW/24 V Steering wheel, tiltable Sun visor Tires (29.5-25-22PR tubeless) and rims Transmission, 4 forward and 4 reverse

STANDARD EQUIPMENT 2-spool valve for boom and bucket controls Alternator, 75 A/24 V Auto shift transmission with mode select system Back-up alarm Back-up lamp Batteries, 170 Ah/12 V x 2 Counterweight Directional signal Engine, Komatsu SAA6D140E-5 diesel Engine pre-cleaner with extension Engine shut-off system, electric EPC fingertip control levers with automatic leveler and positioner Floormat Front fender Hard water area arrangement (corrosion resister) Hydraulic-driven fan with reverse rotation Lift cylinders and bucket cylinder Main monitor panel with EMMS (Equipment Management Monitoring System)

OPTIONAL EQUIPMENT 12V converter Additional counterweight Air conditioner Alternator, 90A/24V AM/FM radio AM/FM stereo radio cassette Automatic greasing Batteries, 220 Ah/12V x 2 Battery disconnect switch Brake cooling system Bucket teeth (bolt-on type) Bucket teeth (tip type) Cab heater and defroster Cold area arrangement (-30 thru 40C) Cutting edge (bolt-on type) ECSS (Electronically Controlled Suspension System) Emergency steering (SAE) Fire extinguisher FNR directional change switch Fuel quick coupler High lift boom In-line filter Joystick steering Load meter, new type Lock-up clutch torque converter Ordinary spare parts Power train guard Quick nipple for hydraulic Sandy area arrangement Seat, air suspension with automatic weight adjustment Seat belt Segment edges Tool kit Vandalism protection kit Limited slip differential (F&R)

www.Komatsu.com

Printed in Japan 200601 IP.SIN (10)

Photo may include optional equipment.

WHEEL LOADER
CEN00067-00 Materials and specifications are subject to change without notice is a trademark of Komatsu Ltd. Japan

WA500-6

W HEEL L OADER Increased Reliability

Reliable Komatsu designed and

WHEEL LOADER

WA500-6
HORSEPOWER Gross: 266 kW 357 HP @ 1900 rpm Net: 263 kW 353 HP @ 1900 rpm

WALK-AROUND
Excellent Operator Environment High Productivity & Low Fuel Consumption
High performance SAA6D140E-5 engine Low fuel consumption Dual-mode engine power select system Automatic transmission with shift timing select system Lock-up Torque Converter (Optional) Variable displacement piston pump & CLSS Increased bucket capacity Long wheelbase
See pages 4 and 5.

Cathion electrodeposition process

is used to apply primer paint Powder coating process is used to apply main structure paint Sealed DT connectors for electrical connections

Automatic transmission with ECMV Low-noise designed cab Electronic controlled transmission lever Variable transmission cut-off system Engine RPM set system with auto decel EPC (Electronic Pilot Control) levers Pillar-less large ROPS/FOPS integrated cab Easy entry/exit, rear-hinged door Telescopic / tilt steering column
See pages 8 and 9.

manufactured components Sturdy main frame Maintenance-free, fully hydraulic, wet disc service and parking brakes Hydraulic hoses use flat face O-ring seals See page 6.

BUCKET CAPACITY 4.35.6 m3 5.6-7.3 yd3

Building on the technology and expertise Komatsu has accumulated since its establishment in 1921, GALEO presents customers worldwide with a strong, distinctive image of technological innovation and exceptional value. The GALEO brand will be employed for Komatsus full lineup of advanced construction and mining equipment. Designed with high productivity, safety and environmental considerations in mind, the machines in this line reflect Komatsus commitment to contributing to the creation of a better world.

Photo may include optional equipment.

Harmony with Environment

Meets EPA Tier 3 and EU stage 3A
emission regulations Low exterior noise Low fuel consumption

Easy Maintenance
EMMS (Equipment Management
Monitoring System) See page 7.

Ease of radiator cleaning Modular radiator core system

Genuine Answer for Land and Environment Optimization

2

WA500-6

W HEEL L OADER

WHEEL LOADER

HIGH PRODUCTIVITY AND LOW FUEL CONSUMPTION

Automatic Transmission with Mode Select System
This operator controlled system allows the operator to select manual shifting or two levels of automatic shifting (low, and high). Auto L mode is for fuel saving operation with the gear shift timing set at lower speeds than Auto H mode. Therefore Auto L mode keeps the engine in a relatively low rpm range for fuel conservation while yielding adequate tractive force by depressing the accelerator pedal.

WA500-6 WA380-6

High Performance SAA6D140E-5 Engine

Electronic Heavy Duty Common Rail fuel injection system provides optimum combustion of fuel. This system also provides fast throttle response to match the machines powerful tractive effort and fast hydraulic response.

Shift mode selection switch

Lock up clutch switch (optional)

Lock-up Torque Converter (optional)

The Komatsu designed lock-up torque converter provides increased production efficiency, reduced cycle times and optimum fuel savings in load & carry or hill-climb operations. This optional feature allows the operator to activate the system on/off with a switch located on the right-side control panel.

Net: 263 kW 353 HP Low Emission Engine

This engine meets EPA Tier 3 emission regulations and EU stage 3A emission regulations, without sacrificing power or machine productivity.

Variable displacement piston pump & CLSS

New design variable displacement piston pump combined with the Closed-center Load Sensing System delivers hydraulic flow just as the job requires preventing wasted hydraulic pressure. Minimized waste loss contributes to better fuel economy. New Variable Displacement Piston Pump: The pump delivers only necessary amounts minimizing waste loss.
Controller Pump Valve Quick movement Feedback Feedback Controller Pump Valve Slow movement

Low Fuel Consumption

The fuel consumption is reduced greatly because of the low-noise, high-torque engine and the large-capacity torque converter with maximum efficiency in the low-speed range.

Dual-Mode Engine Power Select System

This wheel loader offers two selectable operating modes E and P. The operator can adjust the machines performance with the selection switch. E Mode: This mode provides maximum fuel efficiency for general loading. P Mode: This mode provides maximum power output for hard digging operation or hill climb. Dual mode engine power selection switch

Increased Bucket Capacity matches with one class higher dump truck
The WA500 enables loading onto 32t (40 Short ton) with the standard spec whereas WA500-6 necessitates the high lift boom with the 4.5m3 bucket for it. Operator can get good visibility because of high his eye point.

Long Wheelbase/Articulation Angle of 40

The widest tread in class and the long wheelbase provide improved machine stability in both longitudinal and lateral directions. Since the articulation angle is 40, the operator can work efficiently even in the tightest job sites.
Tread Wheelbase 2400 mm 3780 mm 7'10" 12'5" 21'1"

Fixed Displacement Piston Pump: The pump delivers the maximum amount at any time and the unused flow is disposed.

40

Minimum turning radius 6430 mm (center of outside tire)

Pump

Valve Quick movement

Pump

Valve Slow movement

Loss

Loss

Eco indicator

Dumping Clearance: 3295 mm 10'10" Dumping Reach: 1500 mm 4'11" (5.6 m3 7.3 yd3 bucket with B.O.C.)

The eco indicator will help an operator to promote energy saving.

WA500-6

W HEEL L OADER

WHEEL LOADER

INCREASED RELIABILITY
Komatsu Components
Komatsu manufactures the engine, torque converter, transmission, hydraulic units, electric parts, on this wheel loader. Komatsu loaders are manufactured with an integrated production system under a strict quality control system.

EASY MAINTENANCE

WA500-6 WA380-6

High-rigidity Frames and Loader Linkage

The front and rear frames and the loader linkage have more torsional rigidity to secure resistance against increased stress due to the use of a larger bucket. Frame and loader linkage are designed to accommodate actual working loads, and simulated computer testing proves its strength.

Photo may include optional equipment.

Wet multi-disc brakes and fully hydraulic braking system mean lower maintenance costs and higher
reliability. Wet disc brakes are fully sealed. Contaminants are kept out, reducing wear and maintenance. Brakes require no adjustments for wear, meaning even lower maintenance. The new parking brake is also an adjustment-free, wet multi-disc for high reliability and long life. Added reliability is designed into the braking system by the use of two independent hydraulic circuits. Provides hydraulic backup should one of the circuits fail. Fully hydraulic brakes mean no air system to bleed, or the condensation of water in the system that can lead to contamination, corrosion, and freezing.

Flat Face-to-Face O-Ring Seals

Flat face-to-face O-ring seals are used to securely seal hydraulic hose connections and to prevent oil leakage. In addition, buffer rings are installed to the head side of the all-hydraulic cylinders to lower the load on the rod seals and maximize the reliability.
dust seal rod packing

nipple

EMMS (Equipment Management Monitoring System)

Monitor is mounted in front of the operator for easy viewing, allowing the operator to easily check gauges and warning lights. A specially designed two-spoke steering wheel allows the operator to easily see the instrument panel. Maintenance Control and Troubleshooting Functions Action code display function: If abnormality occurs, the monitor displays action details on the character display at the bottom center of the monitor. Monitor function: Controller monitors engine oil level, pressure, coolant temperature, air cleaner clogging, etc. If controller finds abnormalities, the error is displayed on LCD. Replacement time notice function: Monitor informs replacement time of oil and filters on LCD when replacement intervals are reached. Trouble data memory function: Monitor stores abnormalities for effective troubleshooting.

Gull-wing Type Engine Side Doors Open Wide

The operator can open and close each gull-wing type engine side door easily with the assistance of a gas spring to perform daily service checks from the ground.

hose

O-ring
buffer rings

Modular radiator core system

The modular radiator core is easy to replace without removing the entire radiator assembly.

Cathion Electrodeposition Primer Paint/ Powder Coating Final Paint

Cathion electrodeposition paint is applied as a primer paint and powder coating is applied as topcoat to the exterior sheet metal parts. This process results in a beautiful rust-free machine, even in the most severe environments. Some external parts are made of plastic providing long life and high impact resistance.

Ease of Radiator Cleaning

If the machine is operating in adverse conditions, the operator can reverse the hydraulic cooling fan from inside the cab by turning a switch on the control panel.

Sealed DT Connectors
Main harnesses and controller connectors are equipped with sealed DT connectors providing high reliability, water resistance and dust resistance.

WA500-6

W HEEL L OADER

WHEEL LOADER

OPERATOR ENVIRONMENT
Easy Operation
Automatic Transmission with ECMV
Automatic transmission with ECMV automatically selects the proper gear speed based on travel speed, engine speed, and other travel conditions. The ECMV (Electronically Controlled Modulation Valve) system engages the clutch smoothly to prevent lags and shocks when shifting. This system provides efficient machine operation and a comfortable ride. Kick-down switch: Consider this valuable feature for added productivity. With the touch of a finger, the kick-down switch automatically downshifts from second to first when beginning the digging cycle. It automatically upshifts from first to second when the direction control lever is placed in reverse. This results in increased rim pull for better bucket penetration and reduced cycle times for higher productivity. Hold switch: Auto shift is selected and if the operator turns on this switch when the lever is at the 3rd or 4th gear speed position, the transmission is fixed to that gear speed. 9 10
3rd auto change 1st 1st hold 2nd 3rd 4th

WA500-6 WA380-6

Comfortable Operation
Variable Transmission Cut-off System
The operator can continuoucly adjust the transmission cut-off pressure desired for the left brake pedal using switch located on the right-side control panel. The operator can improve the working performance by setting the cut-off pressure properly depending on working condition. High cut-off pressure for digging operations. Low cut-off pressure for truck-loading operations. 5 6
1:Cut-off ON/OFF switch 2:Cut-off adjustment switch 3:Boom positioner switch 4:Bucket digging angle control switch 5:RPM set ON/OFF switch 6:RPM set adjustment switch 7:Semi-auto digging system 8:Fan reverse switch 9:Boom control 10:Bucket control

EPC (Electronic Pilot Control) levers

The EPC work equipment control lever is a finger controlled lever having light operating effort and short stroke. The operator can oprate easy and comfortable with full adjustable large size arm rest. Combined with CLSS, this system allows following new functions for easy and efficient operation. Remote Boom Positioner with shockless stop function: The highest and lowest position of the bucket can be set from cab to match of any truck body. Once the posiononer is set, the bucket is smoothly stopped at desired position with no shock. Remote bucket digging angle control: The digging bucket angle can be easily set from cab to match of ground condition. Semi-auto digging system (option): Bucket tilt operation can be automatically done when digging.

Low-noise Design
Noise at operators ear noise level : 75 dB(A) Dynamic noise level (outside): 109 dB(A) The large cab is mounted with Komatsus unique ROPS/FOPS viscous mounts. The low-noise engine, hydraulically driven fan, and hydraulic pumps are mounted with rubber cushions, and the cab sealing is improved to provide a quiet, low-vibration, dustproof with pressurizing, and comfortable operating environment. Also, exterior noise is lowest in this class.

2nd

hold

1
4th auto change

8 7
kick-down switch

Pillar-less Large Cab

A wide pillar-less flat glass provides excellent front visibility. The wiper arm covers a large area to provide great visibility even on rainy days. The cab area is the

Telescopic/Tilt Steering Column Engine RPM Set System with Auto Decel
Engine Low idle RPM can be easily preset using a push button switch. The system provides auto desel for better fuel consumption. The operator can tilt and telescope the steering column to provide a comfortable working position.

largest in its class providing maximum space for the operator. Increased seat slide adjustment to backward by introducing front mounted air conditioner unit.

Rear-hinged Full Open Cab Door

The cab door hinges are installed to the rear side of the cab providing a large opening angle for the operator to enter and exit. The steps are designed like a staircase, so that the operator can get on and off the cab easily.

Electronically Controlled Transmission Lever

Easy shifting and directional changes with Komatsu two-lever electronic shifting. Change direction or shift gears with a touch of the fingers without removing the shifting hand from the steering wheel. Solid state electronics and conveniently located direction and gear shift controls make this possible. Automatic shifts in ranges two through four keep production high and manual shifting at a minimum.

WA500-6

W HEEL L OADER
DIMENSIONS Measured with 29.5-25-22PR (L3) tires

WHEEL LOADER

SPECIFICATIONS
ENGINE Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Komatsu SAA6D140E-5 Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Water-cooled, 4-cycle Aspiration . . . . . . . . . . . . . .Turbocharged, aftercooled, cooled EGR Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Bore x stroke . . . . . . . . . . . . . . . . .140 mm x 165 mm 5.51" x 6.50" Piston displacement . . . . . . . . . . . . . . . . . . . . . . . .15.24 ltr 930 in3 Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .all-speed, electronic Horsepower SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . .Gross 266 kW 357 HP ISO 9249/SAE J1349* . . . . . . . . . . . . . . . . . .N e t 263 kW 353 HP Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1900 rpm Fan drive method for radiator cooling . . . . . . . . . . . . . . . . .Hydraulic Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Direct injection Lubrication system: Method . . . . . . . . . . . . . . . . . . . . . . . .Gear pump, force-lubrication Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow type Air cleaner . . . . . . . . . . . . . . . . . .Dry type with double elements and dust evacuator, plus dust indicator
*Net horsepower at the maximum speed of radiator cooling fan is 248 kW 332 HP.

WA500-6 WA380-6 WA380-6

STEERING SYSTEM Type . . . . . . . . . . . . . . .Articulated type, full-hydraulic power steering Steering angle . . . . . . . . . . . . . . . . . . . . . . . . . . .40 each direction Minimum turning radius at the center of outside tire . . . . . . . . . . . . . . . . . . . . . .6430 mm 21'1"
B

HYDRAULIC SYSTEM
50

Steering system: Hydraulic pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Piston pump Capacity . . . . . . .120 ltr/min 31.7 U.S. gal/min at max. control flow Relief valve setting . . . . . . . . . . . .24.5 MPa 250 kgf/cm2 3,550 psi Hydraulic cylinders: Type . . . . . . . . . . . . . . . . . . . . . . . . . .Double-acting, piston type Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Bore x stroke . . . . . . . . . . . . . .100 mm x 486 mm 3.9" x 19.1" Loader control: Hydraulic pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Piston pump Capacity . . . . . . . . . . . .321 ltr/min 84.8 U.S. gal/min at rated rpm Relief valve setting . . . . . . . . . . . .34.3 MPa 350 kgf/cm2 4,980 psi Hydraulic cylinders: Type . . . . . . . . . . . . . . . . . . . . . . . . . .Double-acting, piston type Number of cylindersbore x stroke: Boom cylinder . . . . . . . . . . .2- 160 mm x 898 mm 6.3" x 35.4" Bucket cylinder . . . . . . . . . . .1- 185 mm x 675 mm 7.3" x 26.6" Control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-spool type Control positions: Boom . . . . . . . . . . . . . . . . . . . . . . . .Raise, hold, lower, and float Bucket . . . . . . . . . . . . . . . . . . . . . . . . .Tilt-back, hold, and dump Hydraulic cycle time (rated load in bucket) Raise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.2 sec Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.7 sec Lower (Empty) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.2 sec

E C A D

A B C D E F G

Tread Width over tires Wheelbase Hinge pin height, max. height Hinge pin height, carry position Ground clearance Hitch height Overall height, top of the stack Overall height, ROPS cab

2400 mm 3190 mm 3780 mm 4755 mm 575 mm 450 mm 1115 mm 3665 mm 3785 mm

7'10" 10'6" 12'5" 15'7" 1'11" 1'6" 3'8" 12'0" 12'5"

Standard boom General Purpose Buckets Straight edge Bolt-on Cutting edges Bucket capacity: heaped 5.6 m3 7.3 yd3 struck 4.8 m3 6.3 yd3 Bucket width 3400 mm 11'2" Bucket weight 3005 kg 6,625 lb Dumping clearance, max. height 3295 mm and 45 dump angle* 10'10" Reach at max. height 1500 mm and 45 dump angle* 4'11" Reach at 2130 mm (7') clearance 2300 mm and 45 dump angle 7'7" Reach with arm horizontal 3265 mm and bucket level 10'9" Operating height (fully raised) 6430 mm 21'1" Overall length 9815 mm 32'2" Loader clearance circle 7650 mm (bucket at carry, outside corner of bucket) 25'1" Digging depth: 0 135 mm 5" 10 435 mm 1'5" Static tipping load: straight 23450 kg 51,700 lb 40 full turn 20400 kg 44,975 lb Breakout force 245 kN 25000 kgf 55,115 lb Operating weight 32150 kg 70,880 lb Straight edge Teeth 5.3 m3 6.9 yd3 4.5 m3 5.9 yd3 3460 mm 11'4" 2850 kg 6,285 lb 3165 mm 10'5" 1600 mm 5'3" 2340 mm 7'8" 3425 mm 11'3" 6430 mm 21'1" 9975 mm 32'9" 7730 mm 25'3" 155 mm 6" 485 mm 1'7" 23650 kg 52,140 lb 20575 kg 45,360 lb 262 kN 26750 kgf 58,975 lb 31995 kg 70,535 lb Excavating Buckets Straight edge Bolt-on Cutting edges 5.2 m3 6.8 yd3 4.2 m3 5.5 yd3 3400 mm 11'2" 2870 kg 6,325 lb 3395 mm 11'2" 1400 mm 4'7" 2215 mm 7'3" 3120 mm 10'3" 6415 mm 21'1" 9670 mm 31'9" 7610 mm 24'12" 135 mm 5" 410 mm 1'4" 23600 kg 52,030 lb 20500 kg 45,195 lb 268 kN 27300 kgf 60,185 lb 32070 kg 70,700 lb Straight edge Teeth and Segments 5.2 m3 6.8 yd3 4.2 m3 5.5 yd3 3460 mm 11'4" 2960 kg 6,525 lb 3265 mm 10'9" 1495 mm 4'11" 2285 mm 7'6" 3280 mm 10'9" 6415 mm 21'1" 9790 mm 32'1" 7690 mm 25'3" 155 mm 6" 460 mm 1'6" 23490 kg 51,785 lb 20405 kg 44,985 lb 274 kN 27950 kgf 61,620 lb 32160 kg 70,900 lb Straight edge Teeth 5.0 m3 6.5 yd3 4.0 m3 5.2 yd3 3460 mm 11'4" 2715 kg 5,990 lb 3265 mm 10'9" 1495 mm 4'11" 2285 mm 7'6" 3280 mm 10'9" 6415 mm 21'1" 9790 mm 32'1" 7690 mm 25'3" 155 mm 6" 460 mm 1'6" 23805 kg 52,480 lb 20680 kg 45,590 lb 288 kN 29400 kgf 64,815 lb 31915 kg 70,360 lb Rock Buckets Spade nose Teeth and Segments 5.0 m3 6.5 yd3 4.2 m3 5.5 yd3 3460 mm 11'4" 3717 kg 8,195 lb 3030 mm 9'11" 1725 mm 5'8" 2400 mm 7'10" 3610 mm 11'10" 6630 mm 21'9" 10155 mm 33'4" 7645 mm 25'1" 165 mm 6" 525 mm 1'9" 23055 kg 50,830 lb 19320 kg 42,595 lb 233 kN 23800 kgf 52,470 lb 32850 kg 72,420 lb Spade nose Teeth 4.7 m3 6.1 yd3 4.0 m3 5.2 yd3 3460 mm 11'4" 3460 kg 7,630 lb 3030 mm 9'11" 1725 mm 5'8" 2400 mm 7'10" 3610 mm 11'10" 6630 mm 21'9" 10155 mm 33'4" 7645 mm 25'1" 165 mm 6" 525 mm 1'9" 23380 kg 51,545 lb 19595 kg 43,200 lb 243 kN 24750 kgf 54,565 lb 32605 kg 71,880 lb

High lift boom Excavating Buckets Straight edge Bolt-on Cutting edges 4.5 m3 5.9 yd3 3.7 m3 4.8 yd3 3400 mm 11'2" 2795 kg 6,160 lb 3890 mm 12'9" 1435 mm 4'8" 2585 mm 8'6" 3385 mm 11'1" 6715 mm 22'0" 10030 mm 32'11" 7805 mm 25'7" 210 mm 8" 470 mm 1'7" 21555 kg 47,520 lb 18750 kg 41,335 lb 286 kN 29140 kgf 64,245 lb 33170 kg 73,125 lb Straight edge Teeth and Segments 4.5 m3 5.9 yd3 3.7 m3 4.8 yd3 3460 mm 11'4" 2885 kg 6,360 lb 3920 mm 12'10" 1405 mm 4'7" 2645 mm 8'8" 3545 mm 11'8" 6715 mm 22'0" 10190 mm 33'5" 7890 mm 25'11" 235 mm 9" 520 mm 1'8" 21440 kg 47,265 lb 18650 kg 41,115 lb 294 kN 30000 kgf 66,140 lb 33260 kg 73,325 lb Straight edge Teeth 4.3 m3 5.6 yd3 3.5 m3 4.6 yd3 3460 mm 11'4" 2640 kg 5,820 lb 3920 mm 12'10" 1405 mm 4'7" 2645 mm 8'8" 3545 mm 11'8" 6715 mm 22'0" 10190 mm 33'5" 7890 mm 25'11" 235 mm 9" 520 mm 1'8" 21745 kg 47,940 lb 18915 kg 41,700 lb 310 kN 31620 kgf 69,710 lb 33015 kg 72,785 lb

TRANSMISSION Torque converter: Type . . . . . . . . . . . . . . . . . . .3-element, single-stage, double-phase Transmission: Type . . . . . . . . . . . . . . . . . . . . . . . . .Full-powershift, planetary type Travel speed: km/h mph Measured with 29.5-25 tires Forward Reverse 1st 7.7 4.8 8.6 5.3 2nd 12.5 7.8 13.0 8.1 3rd 22.3 13.9 24.8 15.4 4th 34.9 21.7 37.5 23.3

SERVICE REFILL CAPACITIES AXLES AND FINAL DRIVES Drive system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Four-wheel drive Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fixed, full-floating Rear . . . . . . . . . . . . . . . . . . . . . . . . .Center-pin support, full-floating, 24 total oscillation Reduction gear . . . . . . . . . . . . . . . . . . . . . . . . . . . .Spiral bevel gear Differential gear . . . . . . . . . . . . . . . . . . . . . . . . . . .Conventional type Final reduction gear . . . . . . . . . . . . .Planetary gear, single reduction Cooling system . . . . . . . . . . . . . . . . . . . . . . . .120 ltr Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . .473 ltr Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 ltr Hydraulic system . . . . . . . . . . . . . . . . . . . . . . .337 ltr Axle front . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 ltr rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 ltr Torque converter and transmission . . . . . . . . . .76 ltr 31.7 U.S. gal 124.9 U.S. gal 11.9 U.S. gal 89.0 U.S. gal 22.9 U.S. gal 21.4 U.S. gal 20.0 U.S. gal

BUCKET SELECTION GUIDE BRAKES Service brakes . . . . . . . . . . . . . . . . . . . . . . . .Hydraulically actuated, wet disc brakes actuate on four wheels Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Wet disc brake Emergency brake . . . . . . . . . . . . . .Parking brake is commonly used
m3 yd3 5.6 7.3 Bucket capacity: m3 yd3 5.3 6.9 5.2 6.8 5.0 6.5 4.7 6.1 Hight lift boom 4.5 5.9 4.3 5.6 lb/yd3 2023 kg/m3 1200
Excavating Bucket with BOC Excavating Bucket with Teeth and Segments Excavating Bucket with Teeth
Bucket fill factor 115 100 95%

General Purpose Bucket with BOC General Purpose Bucket with Teeth Excavating Bucket with BOC Excavating Bucket with Teeth and Segments Excavating Bucket with Teeth Rock Bucket with Teeth and Segments (Spade Nose) Rock Bucket with Teeth (Spade Nose)

* At the end of tooth or B.O.C.

All dimensions, weights, and performance values based on SAE J732c and J742b standards. Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, and operator. Machine stability and operating weight affected by counterweight, tire size, and other attachments. Apply the following weight changes to operating weight and static tipping load.

2360 1400

2698 1600

3035 1800

3372 2000

3709 2200

Material density: kg/m3 lb/yd3

10

11