BUCKET CAPACITY

3.8 6.1 m
3
5.08.0 yd
3
WHEEL LOADER
Photo may include optional equipment.
2
WA480-5 Wheel Loader
WALK-AROUND
WALK-AROUND
High Productivity
& Low Fuel Consumption
Powerful engine
Ultra-low fuel consumption
Dual-mode engine power select system
Transmission mode select system
Dual speed hydraulic system
Superior dumping clearance and reach
Long wheelbase and 40 degree articulation
See page 4.
Excellent Operator Environment
Automatic transmission with selectable modes
Low-noise designed cab (option)
Electrically controlled transmission lever
Fingertip control levers
Pillar-less large ROPS/FOPS cab (option)
Easy entry/exit, rear-hinged doors
Telescopic/tilt steering column
See pages 8 and 9.
Harmony with Environment
Meets EPA Tier II and EC second
emission regulations
Low spectator noise
Low fuel consumption
Based upon the expertise, technology and success which
Komatsu has accumulated over 80 years, the new brand
was born to provide customers all over the world a fresh
image of the innovative technology and great value of Komatsu
equipment. The new brand name is GALEO. High
productivity, environment-friendly, safety and benefiting
from cutting-edge technology, GALEO will contribute
to our environment in the 21st century.
Genuine Answer for Land
and Environment Optimization
3
NET HORSEPOWER
202 kW 271 HP @ 2000 rpm
OPERATING WEIGHT
24010 24295 kg
52,93253,561 lb
BUCKET CAPACITY
3.8 6.1 m
3
5.08.0 yd
3
WA480-5
WHEEL LOADER
Increased Reliability
Reliable Komatsu designed and
manufactured components
Sturdy main frame
Maintenance-free, fully hydraulic,
wet disc service and parking brakes
All hydraulic hoses use flat face
O-ring seals
See page 6.
Cathion electrodeposition process
is used to apply primer paint
Powder coating process is used to
apply on main structure
Sealed DT connectors for electrical
connections
Easy Maintenance
EMMS (Equipment Management
Monitoring System)
Reversible radiator fan
Swing-out aftercooler and
oil coolers
See page 7.
Prolonged engine oil change interval
Ground check for windshield washer
tank and coolant tank
Easy access, gull-wing type engine
side doors
Photo may include optional equipment.
4
PRODUCTIVITY
FEATURES
PRODUCTIVITY
FEATURES
Powerful Engine
The electronically controlled fuel injection timing in the
SAA6D125E-3 engine provides optimum combustion of fuel
at both low and high speed/power applications. This system
also provides fast throttle response to match the machines
powerful rim pull and fast hydraulic response.
202 kW, 271 HP
The common rail type fuel injection system provides
maximum power with minimum emissions. This engine
meets EPA Tier II emission regulations and EC second
emission regulations.
Low Fuel Consumption
The fuel consumption is reduced greatly because of the
low-noise, high-torque engine and the large-capacity torque
converter with maximum efficiency in the low-speed range.
Reduction of Fuel Consumption: 15% (compared with
Dash 3 technology).
Dual-Mode Select System
This wheel loader offers two selectable operating modes
Normal and Power. The operator can adjust the machines
performance by flipping a switch.
Normal Mode: This mode
provides maximum fuel
efficiency for most of
general loading.
Power Mode: This mode
provides maximum power
output for hard digging
operation or hill climb.
Transmission Mode Select System
This operator controlled system allows the operator to
select manual shifting or three levels of automatic shifting
(low, medium, and high).
Manual: Transmission is
fixed to gear speed selected
with gear shift lever.
Auto. L: This mode
provides smooth gear
change and low fuel
consumption since gear
shifting is performed at relatively low engine speeds,
suitable for general excavating and loading.
Auto. M: Gear is shifted at medium engine speeds
between those of L and H modes.
Auto. H: This mode provides large rim pull and short
cycle time since gear shifting is performed at relatively
high engine speeds, suitable for load and carry operation
on uphill.
New Dual-Speed Hydraulic System
Komatsus dual-speed hydraulic system increases
operational efficiency by matching the hydraulic demands
to work conditions.
Oil from the switch pump is completely returned to the tank
when digging and breaking out, therefore, hydraulic flow
to the loader is reduced and pressure is increased. This
reduces horsepower demand from the engine and makes
the operation more efficient. Kick-down switch signal also
controls the oil flow. This new technology is greater
productivity at the lowest operating cost.
Loader pump
Switching pump
Cut-off
valve
Tank
Cut-off
valve
Tank
Loader pump
Switching pump
When digging / scooping
All the oil from the switching pump returns to the tank.
Hydraulic load is reduced and large power flows to the tires.
All the oil from the switching pump flows to the work equipment.
The raising speed of the lift arm is increased.
When raising lift arm
High Productivity and Low Fuel Consumption
5
WA480-5
WHEEL LOADER
Maximum Dumping Clearance and Reach
The long lift arms provide
high dumping clearances
and maximum dumping
reach. The operator can
even level loads on the
body of a dump truck
easily and efficiently.
Dumping Clearance: 3205 mm 10'6"
Dumping Reach: 1410 mm 4'8"
(4.6 m
3
6.0 yd
3
bucket with B.O.C.)
Long Wheelbase/Articulation Angle of 40
The longest wheelbase in class and the widest tread provide
improved machine stability in both longitudinal and lateral
directions. Since the articulation angle is 40, the operator
can work efficiently even in the tightest job sites.
40
Tread 2300 mm 7'7"
Wheelbase 3450 mm 11'4"
Minimum turning radius (center of outside tire) 5900 mm 19'4"
Komatsu Components
Komatsu manufactures the engine, torque converter,
transmission, hydraulic units, electric parts, and even each
bolt on this
wheel loader.
Komatsu
loaders are
manufactured
with an
integrated
production
system under
a strict quality
control system.
Wet multi-disc brakes and fully hydraulic braking
system mean lower maintenance costs and higher
reliability. Wet disc brakes are fully sealed. Contaminants
are kept out, reducing wear and resulting maintenance.
Brakes require no adjustments for wear, meaning even
lower maintenance. The new parking brake is also an
adjustment-free, wet multi-disc for high reliability
and long life.
Added reliability is designed into the braking system by the
use of two independent hydraulic circuits. Provides hydraulic
backup should one of the circuits fail.
Fully hydraulic brakes mean no air system to bleed,
or the condensation of water in the system that can
lead to contamination, corrosion, and freezing.
High-rigidity Frames
The front and rear frames have high rigidity to bear twisting
and bending loads applied repeatedly to the loader body.
Both upper and lower center pivot bearings are tapered
roller bearings having high durability. The structure is similar
to those of large-sized loaders and the reinforced loader
linkage also ensures high rigidity.
Flat Face-to-Face O-Ring Seals
Flat face-to-face O-ring seals
are used to securely seal all
hydraulic hose connections
and to prevent oil leakage.
In addition, buffer rings are
installed to the head side of
the all-hydraulic cylinders to
lower the load on the rod
seals and maximize
the reliability.
Cathion Electrodeposition Primer Paint/
Powder Coating Final Paint
Cathion electrodeposition paint is applied as a primer
paint and powder coating is applied as topcoat to the
exterior metal sheet parts. This process results in a
beautiful rust-free machine, even in the most severe
environments. Some external parts are made of plastic
providing long life and high impact resistance.
Sealed DT Connectors
Main harnesses and controller connectors are equipped
with sealed DT connectors providing high reliability, water
resistance and dust resistance.
6
INCREASED
RELIABILITY
INCREASED
RELIABILITY
front axle
transmission
rear axle
engine
torque converter
Komatsu Components
buffer rings
dust seal
rod packing
nipple
hose
O-ring
EMMS (Equipment Management
Monitoring System)
Monitor is mounted in front of the operator and is tilted for
easy view, allowing the operator
to easily check gauges and
warning lights.
A specially designed two-spoke steering wheel allows the
operator to easily see the instrument panel.
Maintenance Control
and Troubleshooting Functions
Action code display function. If the loader has any
troubles, the monitor displays action details on the
character display at the center bottom of the monitor.
Monitor function. Controller monitors engine oil level,
pressure, coolant temperature, air cleaner clogging, etc.
If controller finds abnormalities, all of these are displayed
on LCD.
Replacement time notice function. Monitor informs
replacement time of oil and filters on LCD when it reaches
replacement intervals.
Trouble data memory function. Monitor stores
abnormalities for effective troubleshooting.
Reversible Cooling Fan
and Swing-out Cooler Elements
If the machine is
operating in adverse
conditions, the
operator can reverse
the hydraulic cooling
fan from inside the
cab by turning on a
switch on the control
panel. The coolers can
also swing out for
easy cleaning.
7
WA480-5
WHEEL LOADER
EASY
MAINTENANCE
EASY
MAINTENANCE
Lengthened Maintenance Interval
Lengthened engine oil replacement interval:
250 H 500 H
Lengthened drive shaft greasing interval:
1,000 H 4,000 H
Gull-wing Type Engine Side Doors Open Wide
The operator can open and close each gull-wing type engine
side door easily with the assistance of a gas spring to
perform daily service checks from the ground.
8
OPERATOR
ENVIRONMENT
OPERATOR
ENVIRONMENT
Automatic Transmission with ECMV
Automatic transmission with ECMV automatically selects the
proper gear speed based on travel speed, engine speed, and
other travel conditions. The ECMV (Electronically Controlled
Modulation Valve) system engages the clutch smoothly to
prevent lags and shocks when shifting. This system provides
efficient machine operation and a comfortable ride.
Kick-down
switch: Consider
this valuable
feature for added
productivity. With
the touch of
a finger, the
kick-down switch
automatically downshifts from second to first when
beginning the digging cycle. It automatically upshifts
from first to second when the direction control lever is
placed in reverse. This results in increased rim pull for
better bucket penetration and reduced cycle times for
higher productivity.
Hold switch: Auto shift is selected and if the operator
turns on this switch when the lever is at the 3rd or 4th
gear speed position, the transmission is fixed to that
gear speed.
Electronically Controlled Transmission Lever
Easy shifting and
directional changes
with Komatsu two-lever
electronic shifting.
Change direction or
shift gears with a touch
of the fingers without
removing the shifting
hand from the steering
wheel. Solid state electronics and conveniently located
direction and gear shift controls make this possible.
Automatic shifts in ranges two through four keep
production high and manual shifting at a minimum.
Variable Transmission Cut-off
The operator can adjust the transmission cut-off connected to
the left brake pedal with the switch near the operators seat
to set the brake/cut-off point for easier operation and higher
operating performance in variable operating conditions.
High cut-off pressure for digging operations.
Low cut-off pressure for truck-loading operations.
Telescopic/Tilt
Steering Column
The operator can
tilt and telescope
the steering column
to provide a
comfortable working
position.
Fingertip Work Equipment Control Lever
New PPC control levers are used for the work equipment.
The operator can easily operate the work equipment with
fingertip control, reducing operator fatigue and increasing
controllability. The PPC control lever column can be tilted
forward or rearward and the wrist rest can be adjusted up
or down to provide the
operator with a variety
of comfortable operating
positions.
1st
2nd
3rd
4th
2nd 4th 3rd 1st
hold
hold
kick-down switch
auto change
auto change
Easy Operation
9
WA480-5
WHEEL LOADER
Low-noise Design
Operator noise: 72 dB(A)
Dynamic noise (outside): 110 dB(A)
The large cab is mounted with
Komatsus unique ROPS/FOPS
viscous mounts. The low-noise engine, hydraulically driven
fan, and hydraulic pumps are mounted with rubber cushions,
and the cab sealing is improved to provide a quiet,
low-vibration, dustproof with pressurizing, and comfortable
operating environment. Also, spectator noise is lowest
in this class.
Pillar-less Large Cab
(Optional)
A wide pillar-less flat
glass provides excellent
front visibility. The wiper
arm covers a large area
to provide great visibility
even on rainy days.
The cab area is the largest in its class providing maximum
space for the operator.
Rear-hinged Full Open Cab Door
The cab door hinges are
installed to the rear side
of the cab providing
a large opening angle
for the operator to enter
and exit. The steps
are designed like a
staircase, so that the
operator can get on
and off the cab easily.
Emergency Brake
If the brake oil pressure drops, the warning lamp flashes
and the warning buzzer sounds intermittently. If the brake
pressure drops lower, the parking brake is applied providing
a double safety system.
Comfortable Operation
10
SPECIFICATIONS
SPECIFICATIONS
ENGINE
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Komatsu SAA6D125E-3
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Water-cooled, 4-cycle
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Turbocharged
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Bore x stroke . . . . . . . . . . . . . . . . . . .125 mm x 150 mm 4.9" x 5.9"
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . .11.04 ltr 674 in
3
Performance:
Flywheel horsepower . . . . . . . . . . . .202 kW 271 HP (SAE J1349)
202 kW 275 PS (DIN 6270)
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2000 rpm
Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Direct injection
Governor . . . . . . . . . . . . . . . . . . . . . . . .Electronic, all-speed control
Lubrication system:
Lubrication method . . . . . . . . . . . . . . .Gear pump, force-lubrication
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow type
Air cleaner . . . . . . . . . . . . . . . . . .Dry type with double elements and
dust evacuator, plus dust indicator
TRANSMISSION
Torque converter:
Type . . . . . . . . . . . . . . . . . . . .3-element, single-stage, single-phase
Transmission:
Type . . . . . . . . . . . . . . . . . . . . . . .Full-powershift, countershaft type
Travel speed: km/h mph
HYDRAULIC SYSTEM
Steering system:
Hydraulic pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Gear pump
Capacity . . . . . . . . . . . .146 ltr/min 38.6 U.S. gal/min at rated rpm
Relief valve setting . . . . . . . . . . . . . . . . . . . .210 kgf/cm
2
3,000 psi
Hydraulic cylinders:
Type . . . . . . . . . . . . . . . . . . . . . . . . . .Double-acting, piston type
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Bore x stroke . . . . . . . . . . . . . .100 mm x 441 mm 3.9" x 17.3"
Loader control:
Hydraulic pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Gear pump
Capacity . . . . . . . . . . . .303 + 120 ltr/min 80.0 + 31.7 U.S. gal/min
at rated rpm
Relief valve setting . . . . . . . . . . . . . . . . . . . .210 kgf/cm
2
3,000 psi
Hydraulic cylinders:
Type . . . . . . . . . . . . . . . . . . . . . . . . . .Double-acting, piston type
Number of cylindersbore x stroke:
Boom cylinder . . . . . . . . . . .2180 mm x 881 mm 7.1" x 34.7"
Bucket cylinder . . . . . . . . .1225 mm x 572 mm 8.9" x 22.5"
Control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-spool type
Control positions:
Boom . . . . . . . . . . . . . . . . . . . . . . . .Raise, hold, lower, and float
Bucket . . . . . . . . . . . . . . . . . . . . . . . . .Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket)
Raise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.5 sec
Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.6 sec
Lower (Empty) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.8 sec
SERVICE REFILL CAPACITIES
Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . .50 ltr 13.2 U.S. gal
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . .417 ltr 110.2 U.S. gal
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 ltr 10.0 U.S. gal
Hydraulic system . . . . . . . . . . . . . . . . . . . . . . . .186 ltr 49.1 U.S. gal
Axle (each front and rear) . . . . . . . . . . . . . . . . . .55 ltr 14.5 U.S. gal
Torque converter and transmission . . . . . . . . . . .60 ltr 15.9 U.S. gal
BUCKET SELECTION GUIDE
AXLES AND FINAL DRIVES
Drive system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Four-wheel drive
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fixed, semi-floating
Rear . . . . . . . . . . . . . . . . . . . . . . .Center-pin support, semi-floating,
30 total oscillation
Reduction gear . . . . . . . . . . . . . . . . . . . . . . . . . . . .Spiral bevel gear
Differential gear . . . . . . . . . . . . . . . . . . . . . . . . . . .Conventional type
Final reduction gear . . . . . . . . . . . . .Planetary gear, single reduction
BRAKES
Service brakes . . . . . . . . . . . . . . . . . . . . . . . .Hydraulically actuated,
wet disc brakes actuate on four wheels
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Wet disc brake
Emergency brake . . . . . . . . . . . . . .Parking brake is commonly used
STEERING SYSTEM
Type . . . . . . . . . . . . . .Articulated type, full-hydraulic power steering
with orbit-roll system
Steering angle . . . . . . . . . . . . . . . . . . . . . . . . . . .40 each direction
Minimum turning radius at
the center of outside tire . . . . . . . . . . . . . . . . . . . . . .5900 mm 19'4"
1st 2nd 3rd 4th
Forward 6.3 3.9 12.1 7.5 21.6 13.4 34.3 21.3
Reverse 6.6 4.1 12.8 8.0 22.8 14.2 35.8 22.2
1000
3.8
4.1
4.6
4.9
6.1
1500 2000 2500
B
u
c
k
e
t

c
a
p
a
c
i
t
y
:

m
3
Material density: kg/m
3
Light Material Bucket with BOC
(Loading of light material)
Loose Material Bucket with BOC
(Loading of crushed stone and dry sand)
Stock Pile Bucket with BOC
(Loading and excavating of soil, sand and
variety of other commonly handled material)
Excavating Bucket with BOC
Excavating Bucket with Teeth and Segment Edge
(Loading and excavating of crushed or blasted rock)
Excavating Bucket with Teeth
(Loading and excavating of blasted rock)
115 100 95%
Bucket fill factor
General Purpose Buckets
Loose Light
Material Material
Stockpile Excavating
Bucket Bucket
Bolt-on Bolt-on Teeth Bolt-on Bolt-on
Cutting Teeth Cutting and Teeth Cutting Cutting
Edges Edges Segments Edges Edges
Bucket capacity: heaped 4.6 m
3
4.3 m
3
4.1 m
3
4.1 m
3
3.8 m
3
4.9 m
3
6.1 m
3
6.0 yd
3
5.6 yd
3
5.4 yd
3
5.4 yd
3
5.0 yd
3
6.4 yd
3
8.0 yd
3
struck 4.0 m
3
3.8 m
3
3.5 m
3
3.5 m
3
3.2 m
3
4.2 m
3
5.2 m
3
5.2 yd
3
5.0 yd
3
4.6 yd
3
4.6 yd
3
4.2 yd
3
5.5 yd
3
6.8 yd
3
Bucket width 3170 mm 3190 mm 3170 mm 3190 mm 3190 mm 3170 mm 3170 mm
10'5" 10'6" 10'5" 10'6" 10'6" 10'5" 10'5"
Bucket weight 2260 kg 2165 kg 2220 kg 2255 kg 2125 kg 2340 kg 2410 kg
4,982 lb 4,773 lb 4,894 lb 4,971 lb 4,685 lb 5,159 lb 5,313 lb
Dumping clearance, max. height 3205 mm 3080 mm 3295 mm 3170 mm 3170 mm 3125 mm 3080 mm
and 45 dump angle* 10'6" 10'1" 10'10" 10'5" 10'5" 10'3" 10'1"
Reach at max. height and 45 dump angle* 1410 mm 1510 mm 1320 mm 1420 mm 1420 mm 1490 mm 1535 mm
4'8" 5'0" 4'4" 4'8" 4'8" 4'11" 5'0"
Reach at 2130 mm (7') clearance 2135 mm 2180 mm 2080 mm 2130 mm 2130 mm 2180 mm 2205 mm
and 45 dump angle 7'0" 7'2" 6'10" 7'0" 7'0" 7'2" 7'3"
Reach with arm horizontal and bucket level 3020 mm 3175 mm 2895 mm 3050 mm 3050 mm 3135 mm 3195 mm
9'11" 10'5" 9'6" 10'0" 10'0" 10'3" 10'6"
Operating height (fully raised) 6175 mm 6175 mm 6025 mm 6025 mm 6025 mm 6175 mm 6450 mm
20'3" 20'3" 19'9" 19'9" 19'9" 20'3" 21'2"
Overall length 9155 mm 9310 mm 9030 mm 9185 mm 9185 mm 9270 mm 9330 mm
30'0" 30'7" 29'8" 30'2" 30'2" 30'5" 30'7"
Loader clearance circle (bucket at carry, 14060 mm 14190 mm 14010 mm 14120 mm 14120 mm 14140 mm 14170 mm
outside corner of bucket) 46'2" 46'7" 46'0" 46'4" 46'4" 46'5" 46'6"
Digging depth: 0 90 mm 110 mm 90 mm 110 mm 110 mm 90 mm 90 mm
3.5" 4.3" 3.5" 4.3" 4.3" 3.5" 3.5"
10 355 mm 400 mm 335 mm 380 mm 380 mm 375 mm 385 mm
1'2" 1'4" 1'1" 1'3" 1'3" 1'3" 1'3"
Static tipping load: straight 19300 kg 19395 kg 19340 kg 19305 kg 19435 kg 19220 kg 19150 kg
42,549 lb 42,758 lb 42,637 lb 42,560 lb 42,846 lb 42,372 lb 42,218 lb
40 full turn 16800 kg 16890 kg 16840 kg 16805 kg 16935 kg 16720 kg 16650 kg
37,037 lb 37,236 lb 37,125 lb 37,048 lb 37,335 lb 36,861 lb 36,707 lb
Breakout force 212 kN 226 kN 231 kN 237 kN 249 kN 196 kN 189 kN
47,658 lb 50,805 lb 51,929 lb 53,278 lb 55,975 lb 44,061 lb 42,487 lb
Operating weight 24145 kg 24050 kg 24145 kg 24140 kg 24010 kg 24225 kg 24295 kg
53,230 lb 53,021 lb 53,230 lb 53,219 lb 52,932 lb 53,406 lb 53,561 lb
DIMENSIONS
Tread 2300 mm 7'7"
Width over tires 3010 mm 9'11"
A Wheelbase 3450 mm 11'4"
B Hinge pin height, max. height 4505 mm 14'9"
C Hinge pin height, carry position 585 mm 1'11"
D Ground clearance 525 mm 1'9"
E Hitch height 1240 mm 4'1"
F Overall height, top of the stack 3080 mm 10'1"
G Overall height, ROPS cab 3500 mm 11'6"
B
C
D
52
A
G
F
E
* At the end of tooth or B.O.C.
All dimensions, weights, and performance values based on SAE J732c and J742b standards.
Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, and operator. Machine stability and operating weight affected
by counterweight, tire size, and other attachments.
Apply the weight changes on the following page to operating weight and static tipping load.
WA480-5
WHEEL LOADER
11
Measured with 26.5-25-20PR (L3) tires
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
HESS524200 2001 Komatsu Printed in USA SN7(1.5M)EH DataKom 7/01 (EV-1)
www.Komatsu.com Materials and specifications are subject to change without notice
is a trademark of Komatsu Ltd. Japan
2-spool valve for boom and bucket
controls
Alternator, 35 A
Auto shift transmission with mode
select system
Back-up alarm
Back-up lamp
Batteries, 150 Ah/2 x 12 V
Boom kick-out
Bucket positioner
Counterweight
Directional signal
EMMS (Equipment Management
Monitoring System)
Engine, Komatsu SAA6D125E-3 diesel
Engine shut-off system, electric
Hard water area arrangement
(corrosion resister)
Hydraulic-driven fan with reverse rotation
Lift cylinders and bucket cylinder
Loader linkage with standard lift arm
Main monitor panel with speedometer
PPC fingertip control, two levers
Radiator mask, lattice type
Seat, suspension type with reclining
Service brakes, wet disc type
Starting motor, 7.5 kW/24 V
Steering wheel, tiltable
Swing-out aftercooler and oil cooler
Tires (26.5-25-20PR, L3 tubeless)
and rims
Transmission, 4 forward and 4 reverse
3-spool valve
Additional counterweight
Additional fuel filter
Air conditioner
Air conditioner, side louver
Alternator, 50 A
Alternator, 90 A
AM/FM radio
AM/FM stereo radio cassette
Auto air conditioner
Automatic greasing
Battery disconnect switch
Brake cooling system
Bucket teeth (bolt-on type)
Bucket teeth (tip type)
Counterweight for log
Cutting edge (bolt-on type)
Deluxe suspension seat
ECSS (Electronically Controlled
Suspension System)
Emergency steering (SAE)
Engine pre-cleaner with extension
EPC fingertip control levers with automatic
leveler and positioner
Floormat
Front fender
Heater and defroster
High lift arm
Joystick steering
Limited slip differential (F&R)
Load meter, new type
Lock-up clutch torque converter
Log grapple
Ordinary spare parts
Power train guard
Rear defroster (electric)
Rear fender
Rearview mirror
Rear window washer and wiper
Remote grease (lift arm pivot pin)
ROPS/FOPS cab
ROPS/FOPS canopy
Seat belt
Single lever, loader control
Starting motor, 11 kW
Sun visor
Tool kit
Vandalism protection kit
Water separator
Change
Operating Tipping Load Tipping Load Width Ground
in Vertical
Tires
Weight Straight Full Turn Over Tires Clearance
Dimensions
kg lb kg lb kg lb mm ft in mm ft in mm ft in
26.5-25-20PR(L-3) 0 0 0 0 0 0 3010 9'11" 525 1'9" 0 0
26.5-25-20PR(L-4) +360 +794 +250 +551 +220 +485 3010 9'11" 525 1'9" 0 0
Remove ROPS cab 660 1,455 550 1,213 530 1,168
Install additional
counterweight +400 +880 +950 +2,094 +790 +1,742
WEIGHT CHANGES