PW130 7

NET HORSEPOWER 78 kW 105 HP @ 2.200 rpm OPERATING WEIGHT 12.770 - 15.110 kg BUCKET CAPACITY max.
0,94 m
PW130-7
PW
130
Hydraulic Wheeled Excavator
PW130-7
PW130-7
HYDRAULIC WHEELED EXCAVATOR
WALK-AROUND
The PW130-7 is a rugged, productive, all-European machine. Designed and expressly built for European markets, it delivers productivity, reliability and operator comforts in a robust, environmentally-friendly package. Komatsus exclusive, on-board, HydrauMind system assists in all operations, providing enhanced machine performance thats always perfectly matched to the task.
Whats new on Dash 7:

High lifting capacity Easier maintenance and serviceability Improved operator comfort Lower noise Higher drawbar pull Advanced Attachment Control Multi-function colour monitor
High productivity
The powerful turbocharged and air-to-air aftercooled Komatsu SAA4D102E-2 provides 78 kW/105 HP High lifting capacity and good stability
Advanced Attachment Control

The PW130-7 can be optionally equipped to handle a wide variety of attachments. The advanced attachment control system features: Operator selectable hydraulic ow control Adjustable presets for rapid attachment changeover Attachment piping options for breaker, clamshell or crusher
Excellent reliability and durability

Reliable major components designed and built by Komatsu Exceptionally reliable electronic devices
Undercarriage
Designed for high ground clearance Virtually zero axle rocking with outboard wet disc system Powerful drawbar pull Automatic 3-speed travel 30 km/h maximum travel speed
PW130-7
NET HORSEPOWER 78 kW 105 HP OPERATING WEIGHT 12.770 - 15.110 kg BUCKET CAPACITY max. 0,94 m
SpaceCab
The new PW130-7s cabin space has been increased by 14%, offering an exceptionally roomy operating environment. Sealed and pressurised cab with standard climate control Low-noise design Low-vibration design with cabin damper mounting Cab moved forward for better visibility Ergonomic control levers Seat specially designed for wheeled machines, with exceptional extra comfort
In harmony with the environment

The low emission engine meets EC Stage II emissions standards with increased power and machine productivity The economy mode reduces fuel consumption Low operating noise Designed for easy end-of-life recycling
PW130-7
EMMS
EMMS (Equipment Management and Monitoring System)
The EMMS is a highly sophisticated system, controlling and monitoring all the excavator functions. The user interface is highly intuitive and provides the operator with easy access to a huge range of functions and operating information.
Four working modes
The PW130-7 is equipped with three working modes: (A, E, B), plus a lifting mode (L). Each mode is designed to match the engine speed, pump speed, and system pressure with the current operating requirement. This provides the exibility to match equipment performance to the job at hand.
On-screen symbols
1 2 3 4 5 6 7 8 9 10 11 12 13 14 Working mode Service meter and clock Engine water gauge Engine water temperature warning Hydraulic oil gauge Hydraulic oil temperature warning Fuel gauge Fuel low level warming Travel direction Travel mode Auto deceleration Suspension lock Swing lock Swing position
17
18
16
19
1 3 5 4 9 14 1 2 4 5 7 8 10 11 6
4
2 10 7 6 8 12 11 13 15 3 14 13 12
Push-button control switches

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Working mode select Creep speed High/low speed select Control lever lock Menu select key Service menu Engine auto deceleration Buzzer cancel Brightness adjust Suspension auto lock Suspension lock Accept key Scroll down Scroll up Undo switch Rear left outrigger/blade Front left outrigger/blade Front right outrigger Rear right outrigger
PW130-7
Active mode
For maximum power and fast cycle times. Normally used for heavy operations such as hard digging and loading. This mode allows access to the PowerMax function to temporarily increase the digging force by 7% for added power in tough situations.
Economy mode
The environmentally-friendly mode. For running more quietly during operations at night and/or in urban areas. Fuel consumption and exhaust emissions are reduced.
Breaker mode
Delivers optimal hydraulic pressure, ow and engine RPMs for powerful breaker operations.
Lifting mode
Increases the lifting capacity 7% by raising the hydraulic pressure. This mode supports safe lifting operations.
Working mode A
Application Active mode
Advantage Maximum production/power Fast cycle times
E B L
Economy mode Breaker mode Lifting mode
Excellent fuel economy Optimum engine RPMs and hydraulic ow Hydraulic pressure has been increased by 7%
Easy to see and easy to use

Superb recognition colour LCD screens for each mode. Letters and numbers are combined with colour images for exceptionally clear and easy-to-read information. The high-resolution screen is easy to read in bright sunlight and in all lighting conditions.
Hydraulic ow general adjustment screen in B (breaker) mode
Automatic three-speed travel

The travel speed is automatically shifted from high to low speed, according to the ground conditions.
High Travel speed 30 km/h Low 9,0 km/h Auto 0 - 30 km/h Creep 2,0 km/h
Fine tune hydraulic ow adjustment screen in B (breaker) mode
Fingertip hydraulic pump oil ow adjustment

From the LCD monitor, you can automatically select the optimal hydraulic pump oil ow for breaking, crushing, and other operations in the B, A or E modes. Also, when simultaneously operating with attachments and work equipment, the ow to the attachment is reduced automatically, thus delivering a smooth movement of the work equipment.
Fine tune hydraulic ow adjustment screen in A (active) or E (economy) mode
Password protection
Prevents unauthorised machine use or transport. The engine cannot be started without your four-digit use or password. For total security, the battery is connected directly to the starter motor. Both the starter and the engine need the password. The password can be activated and deactivated upon request. 5
Password screen
PW130-7
WORKING ENVIRONMENT
PW130-7s cab interior is spacious and provides a comfortable working environment
SpaceCab
Comfortable cab
The new PW130-7 inner cab volume is 14% greater than the Dash 6 models, offering an exceptionally comfortable operating environment. The large cab enables the seat, with headrest, to be reclined to horizontal.
Pressurised cab
The standard-equipped climate control, air lter and a higher internal air pressure resist dust entry into the cab.
Low-noise design
Noise levels are substantially reduced; engine noise as well as swing and hydraulics operations noise.
Cab damper mounting for low vibration levels

PW130-7 uses a new and improved viscous damping cab mount system that incorporates a longer stroke plus an added spring. The new cab damper mounting, combined with strengthened left and right-side decks, aids the reduction of vibrations to the operators seat.
Rubber Spring
Silicon oil
Outer air lter Easy removal/installation of the air conditioner lter element, without tools facilitates easier cleaning.
Large sun roof with integrated sun shade
12-Volt power supply and (optional) radio cassette
Climate control
Tiltable steering wheel with several functions; wiper control, indicator, horn, and head lights
PW130-7
Safety features
Multi-position controls
The multi-position, proportional pressure control levers allow the operator to work in comfort whilst maintaining precise control. A double-slide mechanism allows the seat and controllers to move together, or independently, allowing the operator to position the controllers for maximum productivity and comfort. Hot and cool box
Improved, wide visibility

The right side window pillar has been removed and the rear pillar reshaped to provide greater visibility. Blind spots have been decreased by 34%.
Pump/engine room partition

This prevents hydraulic oil from spraying onto the engine to reduce the risk of re.
Thermal and fan guards

Are placed around high-temperature parts of the engine. The fan belt and pulleys are well protected.
Steps with non-skid surface and large handrail

Steps with non-slip surfacing ensure safer maintenance. Ergonomic 3 button lever Thermal guard
Seat sliding range: 340 mm
Non-slip sheet
Defroster/demister
Large handrail for safe access
PW130-7
FLEXIBILITY
ARMS BOOMS
Mono boom
2.100 mm
4.600 mm
2.500 mm
Two-piece boom
Rotating arm 2.600 mm
4.800 mm
Parallel blade Outriggers
Additional hydraulic circuits A 2-way additional hydraulic circuit, electrically controlled from the wrist control levers, is tted as standard.
Outriggers Independently controlled outriggers are optionally available on both, the front and rear of the machine. The cylinder protections are standard on the outriggers.
PW130-7
The PW130-7 can be specied with an enormous range of work equipment and undercarriage attachments to meet the needs of almost any application.
Parallel blade
Outriggers
Attachments commonality & functionality
The stabilizer and dozer blade are interchangeable, and therefore can be attached on the front or rear of the chassis. The stabilizer and dozer blade are controllable from the monitor panel. The monitor panel has four buttons that allow individual attachment operation as well as collective operation.
Toolbox Tough, secure toolbox, integrated in the mudguards. Optionally tted on both sides of the undercarriage.
Dozer blade A parallel blade is available with standard cylinders protector for both the front and rear of the machine. Dimensions: 2.550 mm 520 mm
PW130-7
EASY OPERATION
As well as operating the standard work equipment movements, the RH wrist control lever is also used to operate the undercarriage. When used in conjunction with the selection switch on the control panel, full independent control of outriggers and dozer blade is immediately available. This feature, together with the automatic axle lock, enables the machine to be moved, stabilized and operated extremely quickly.
Clamshell/breaker control
Clockwise clamshell rotation. Also used for breaker operation when B.O. mode is selected.
Undercarriage attachment control

After a single touch, the lever can be used to precisely operate the selected undercarriage attachment. After operating the undercarriage attachments, a single touch reverts the lever into standard boom operation.
Clamshell control
Anti-clock wise clamshell rotation.
Travel control
A rock button is installed on the right hand lever, it controls the travel operation into forward, neutral and rear. From the consistent weighting of the steering to the predictable and precise operation of the travel and brake pedals, the operator will always feel in complete control during travelling.
Travel pedal
10
PW130-7
PRODUCTIVITY FEATURES
Proven reliability and fuel economy
The PW130-7 mounts the Komatsu SAA4D102E-2 engine, an engine with proven performance thanks to the experience gained on the Dash 6 model of the PW130.
Safe and precise lifting

PW130-7s stability is one of the best in its class. The machine is equipped with boom safety valves and overload caution as standard. This combined with the control of HydrauMind and the power of the lifting mode, gives incredible safe and precise lifting performance. Example: The over-front lifting capacity (reach 4,5 m over front, height 1,5 m) has a capacity of 5,6 tonnes (dozer blade down).
PowerMax function
PowerMax can be selected by depressing a joystick button for an instant burst of power to help break through tough digging situations. The PowerMax function is available in the A and E working mode.
Bucket digging force*: Arm crowd force*:
8.500 kg 7.300 kg
* Measured with PowerMax function, 2.100 mm arm and ISO rating
Superb visibility
Excellent all-round visibility is provided by large panoramic windows. Front visibility is further improved by the use of the Komatsu patented wiper system. When not in use the wiper parks on the cab frame itself with no contact with the front window. As well as giving excellent visibility, this systems avoids the need to disconnect the wiper before lifting the front window. The standard new plexiglas roof with sun visor gives the operator a better view of overhead obstacles and machine operations. It also allows more natural light to illuminate the cabs interior.
11
PW130-7
VHMS
VHMS (Vehicle Health Monitoring System)
The VHMSs precise health-check system indicates all of the machines running conditions. At the beginning of, and during, each work shift, abnormality information and machine functions can be checked from the operators seat.
New features: VHMS machine health monitoring

Up to four different mechanical system measurements can be monitored at the same time. A Maintenance Indicator function has been added (Filter and oil replacement time display function). Mechanical system failures are now monitored, in addition to electrical system failures. Failures are indicated with a 6-digit failure code.
Displays running conditions and abnormality indications

At the operators ngertips: the VHMS controller monitors engine oil level, cooling water level, fuel level, engine water temperature, engine oil pressure, battery charging level, air lter clogging, and more. The monitor also indicates whenever abnormalities are detected.
Maintenance alert assistance

The VHMS monitor alerts when oil and lters need to be replaced.
Operation data memory

The system memorises machine operating data such as engine output, hydraulic pressure, and more.
Trouble data memory

The monitor stores and recalls electrical system and mechanical system failures and abnormalities for effective troubleshooting. The twenty most-recent electrical system failures are stored. Mechanical system failures cannot be erased, ensuring accurate documentation of vital service management information.
VHMS real time monitoring system

The real time monitoring system displays up to four different operating parameters simultaneously, giving the mechanic a total overview for faster troubleshooting. Parameters include operating conditions such as hydraulic oil pressure, engine RPMs, various voltages and currents, and even temperature measurement.
Real time monitoring
12
PW130-7
Reducing maintenance costs

Replacement intervals for engine oil and lters
High-performance lters are used in the hydraulic circuit and engine. Replacement intervals for the hydraulic oil lter are signicantly extended, reducing maintenance costs.
Replacement intervals Engine oil Engine oil lter Hydraulic oil Hydraulic oil lter
PW130-7 500 h 500 h 5.000 h 500 h
Designed and built for strength

Using the latest computer aided design techniques and exhaustive testing, the boom and arm desings have been optimised for strength and durability. The highly automated manufacturing process uses the very latest equipment and quality control techniques. Critical welding is carried out by robots to ensure an extremely high quality and consistent product. Precision engineered pin and bush system. The key work equipment joints use a chrome plated pin and bronze bushing system to provide minimal play and extended durability.
Trouble data memory
Maintenance record
Maintenance mode change
13
PW130-7
SPECIFICATIONS
ENGINE Model............................................................ Komatsu SAA4D102E-2 Type .............................. Direct injection, water-cooled, emissionised, turbocharged, after-cooled diesel Rated capacity.................................... 78 kW/105 HP (ISO 9249 Net) at engine speed .............................................................. 2.200 rpm No. of cylinders ................................................................................. 4 Bore stroke ............................................................... 102 120 mm Displacement............................................................................. 3,9 ltr Batteries ......................................................................2 12 V/95 Ah Alternator.............................................................................24 V/40 A Starter motor ................................................................... 24 V/5,5 kW Air lter type......................... Double element type with monitor panel dust indicator and auto dust evacuator Cooling ......................................................... Suction type cooling fan SWING SYSTEM Type ................................................Axial piston motor driving through planetary double reduction gearbox Swing lock .................................... Electrically actuated wet multi-disc brake integrated into swing motor. An additional mechanical pin can be engaged from inside the operator cab Swing speed .....................................................................0 - 11,5 rpm Swing torque............................................................................31 kNm
TRANSMISSION Type .............................Fully automatic power shift transmission with permanent 4 wheel drive Travel motors ............... One variable displacement axial piston motor Maximum pressure .................................................................. 355 bar Travel modes ............................................Automatic + 3 travel modes Max. travel speeds Hi / Lo / Creep.................................................. 30,0 / 9,0 / 2,0 km/h A max. speed restriction of 20 km/h is available as an option. Maximum drawbar pull .......................................................... 8.700 kg Front axle load .....................................................Lower than 8.200 kg Rear axle load .....................................................Lower than 7.400 kg Axle oscillation......................................... 7 Lockable in any position from the operator cab.
HYDRAULIC SYSTEM Type ............... HydrauMind. Closed-centre system with load sensing and pressure compensation valves Additional circuits..................1 additional circuit installed as standard Main pump.................................. Variable displacement piston pump supplying boom, arm, bucket, swing and travel circuits Maximum pump ow...........................................................236 ltr/min Relief valve settings Implement ........................................................................... 365 bar Travel................................................................................... 420 bar Swing .................................................................................. 325 bar Pilot circuit............................................................................. 36 bar
COOLANT AND LUBRICANT CAPACITY (REFILLING) Fuel tank................................................................................... 250 ltr Radiator ................................................................................... 15,7 ltr Engine oil.................................................................................... 16 ltr Swing drive ................................................................................ 2,5 ltr Hydraulic tank........................................................................... 100 ltr Transmission............................................................................ 4,85 ltr Front differential....................................................................... 10,5 ltr Rear differential ......................................................................... 9,5 ltr Front axle hub............................................................................ 2,5 ltr Rear axle hub ............................................................................ 2,0 ltr Swing pinion grease bath amount ............................................. 9,0 ltr
BRAKE SYSTEM Type .................... Dual circuit hydraulic braking system supplied from a separate gear pump. Service brakes..........Pedal actuated wet multi-disc brakes integrated into the axle hubs. Parking brake.................... Electrically actuated wet multi-disc spring actuation hydraulic release brake integrated into the transmission.
ENVIRONMENT Engine emissions ............................. Fully complies with EC Stage II exhaust emission regulations Noise levels LwA external ............................................. 101 dB(A) (2000/14/EC) LpA operator ear ........................71 dB(A) (ISO 6369 dynamic test)
STEERING SYSTEM Steering control .......................................... Hydraulic steering system supplied from a separate gear pump and controlled through LS orbitrol & priority valves. Minimum turning radius .............. 6.790 mm (to center of outer wheel)
14
PW130-7
OPERATING WEIGHT (APPR.) Operating weight, including specied work equipment, operator, lubricant, coolant, full fuel tank and the standard equipment. Weights are without bucket.
Undercarriage type Rear blade Rear outrigger 2 outriggers + blade 4 outriggers
Mono boom 12.770 kg 13.140 kg 13.590 kg 13.960 kg
Two-piece boom 13.100 kg 13.470 kg 13.920 kg 14.290 kg
Two-piece boom + rotating arm 14.110 kg 15.110 kg
BUCKET OPTIONS & DIGGING FORCES Specications and equipment may vary according to regional availability.
BUCKET AND ARM COMBINATIONS Width 400 mm 500 mm 600 mm 700 mm 800 mm 900 mm 1.000 mm 1.100 mm 1.200 mm 1.200 mm Bucket Capacity (SAE) 0,18 m 0,25 m 0,32 m 0,40 m 0,48 m 0,56 m 0,64 m 0,72 m 0,80 m 0,94 m Weight 305 kg 320 kg 350 kg 390 kg 440 kg 475 kg 505 kg 560 kg 620 kg 625 kg 2.100 mm Arm length 2.500 mm

Rotating arm
Material weight up to 1,8 t/m Material weight up to 1,5 t/m Material weight up to 1,2 t/m
Please consult with your distributor for the correct selection of buckets and attachments to suit the application. The recommendations are given as a guide only, based on typical operating conditions.
BUCKET AND ARM FORCE

Arm length Bucket digging force Bucket digging force at PowerMax Arm crowd force Arm crowd force at PowerMax 2.100 mm 7.800 kg 8.500 kg 6.700 kg 7.300 kg 2.500 mm 7.800 kg 8.500 kg 5.400 kg 6.100 kg Rotating arm 7.800 kg 8.500 kg 5.400 kg 5.900 kg
15
PW130-7
DIMENSIONS
MONO BOOM
A C
Driving position Arm length 2.100 mm 2.500 mm A 7.576 mm 7.476 mm Transport position Arm length 2.100 mm 2.500 mm C 7.540 mm 7.520 mm D 2.835 mm 3.255 mm B 3.105 mm 3.391 mm
TWO-PIECE BOOM
A C
Driving position Arm length 2.100 mm 2.500 mm

B
A 6.007 mm 5.869 mm Transport position
B 3.937 mm 3.937 mm
Arm length 2.100 mm 2.500 mm
C 7.777 mm 7.790 mm
D 2.785 mm 2.860 mm
TWO-PIECE BOOM + ROTATING ARM

C A
Driving position Arm length

B
A 5.938 mm Transport position
B 3.956 mm
2.600 m
D
Arm length 2.600 m
C 7.655 mm
D 2.610 mm
16
PW130-7
DIMENSIONS & UNDERCARRIAGE

2.436
2.112
3.060
626 1.914 2.550 3.740
3.675 3.950
445 1.300 4.175 1.035 1.050 1.300 1.300 4.755 1.105
350 4.825 4.532 4.755
385
2.600
1.245
2.166
2.376
17
PW130-7
WORKING RANGE
MONO BOOM
10 9 8 7 6 5 A 4 B 3 2 1 0 1 G 2 F 3 4 5 6 10 9 8 7 6 5 4 3 2 1 0 D E C H
ARM LENGTH A B C D E F G H Max. digging height Max. dumping height Max. digging depth Max. vertical wall digging depth Max. digging depth of cut for 2,44 m level Max. digging reach Max. digging reach at ground level Min. swing radius
2.100 mm 8.660 mm 6.290 mm 4.730 mm 4.175 mm 4.495 mm 7.895 mm 7.690 mm 2.320 mm
18
PW130-7
TWO-PIECE BOOM
10 9 8 7 6 5 A 4 3 2 1 0 1 G 2 3 4 5 6 10 9 8 7 6 5 4 3 2 1 0 F D E
E
19
PW130-7
WORKING RANGE
10 9 8 7 6 5 A 4 3 2 1 0 1 G 2 3 4 5 6 10
D
E
0
20
PW130-7
LIFTING CAPACITY
MONO BOOM
A 6,0 m 4,5 m 3,0 m 1,5 m
Arm length
B 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg *2.800 *2.300 *2.150 *2.200 2.200 2.300 2.650 3.700 *2.800 *2.300 *2.150 *2.200 *2.350 *2.700 3.350 *3.850 *2.800 *2.300 *2.150 *2.200 *2.350 *2.700 *3.400 *3.850 *2.800 *2.300 *2.150 *2.200 *2.350 *2.700 *3.400 *3.850 *2.200 *1.850 *1.750 *1.800 *1.950 2.100 2.400 3.150 *2.200 *1.850 *1.750 *1.800 *1.950 *2.200 *2.750 *3.750 *2.200 *1.850 *1.750 *1.800 *1.950 *2.200 *2.750 *3.750 *2.200 *1.850 *1.750 *1.800 *1.950 *2.200 *2.750 *3.750 *2.800 1.800 1.350 1.150 1.100 1.100 1.300 1.850 *2.800 *2.300 *2.150 *2.200 2.150 2.250 2.600 3.550 *2.800 2.200 1.650 1.450 1.350 1.400 1.650 2.250 *2800 *2300 *2150 1.850 1.750 1.850 2.150 2.900 *2.200 1.600 1.200 1.050 1.000 1.000 1.150 1.550 *2.200 *1.850 *1.750 1.700 1.650 1.700 1.900 2.500 *2.200 *1.850 1.500 1.300 1.250 1.300 1.450 1.950 *2.200 *1.850 *1.750 *1.800 *1.950 2.050 2.350 3.050
3.050 3.000 2.900 2.800 2.800
1.600 1.550 1.450 1.400 1.350
Without stabilizer
*3.450 *3.800 *4.700 4.650 4.500 4.550 4.550 *3.450 *3.800 *4.700 *5.650 5.700 5.650 *4.800 *3.450 *3.800 *4.700 *5.650 6.000 5.900 *4.800 *3.450 *3.800 *4.700 *5.650 *6.150 *6.000 *4.800 *2.500
2.750 2.700 2.500 2.300 2.150 2.100 2.200 *3.450 *3.800 3.900 3.650 3.500 3.450 3.550 *3.300 3.250 3.050 2.800 2.650 2.650 2.700 *3.450 *3.800 *4.700 4.450 4.250 4.200 4.300 *2.500 2.750 2.600 2.350 2.200 2.100 2.150 *2.500 *3.450 3.950 3.700 3.550 3.450 3.450 *2.500 *3.300 3.100 2.900 2.700 2.650 2.650 *2.500 *3.450 *4.400 4.500 4.300 4.250 4.250
*6.750 *7.400 *7.550 *8.950 *7.200
4.750 4.200 3.950 3.950 4.100
kg
*5.800
*5.800
Arm length 2.100 mm
*3.550 *3.700 3.600 3.550 3.500
2.450 2.400 2.300 2.250 2.250
Rear outrigger
*6.750 *7.400 *7.550 *8.950 *7.200
*6.750 7.050 6.800 6.800 6.950
A Reach from swing center *5.800 *5.800 B Bucket hook height C Lifting capacities, including
bucket (462 kg), bucket linkage (84 kg) and bucket cylinder (92 kg)
*3.550 3.850 3.750 3.650 3.650
1.950 1.850 1.800 1.700 1.700
Rear blade
*6.750 *7.400 *7.550 *8.950 *7.200
5.850 5.250 5.000 5.000 5.150
Rating over front
*5.800
*5.800
Rating over side Rating at maximum reach
*3.550 *3.850 *4.000 3.950 3.900
2.950 2.900 2.800 2.700 2.700
Front outrigger + rear blade
*6.750 *7.400 *7.550 *8.950 *7.200
*6.750 *7.400 *7.550 8.650 *7.200
When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights.
*5.800
*5.800
*2.000 3.100 3.000 2.900 2.800 2.800
1.600 1.650 1.550 1.500 1.400 1.350
Without stabilizer
*3.450 *4.400 4.750 4.550 4.450 4.450 *2.500 *3.450 *4.400 *5.400 5.750 5.650 *5.250 *2.500 *3.450 *4.400 *5.400 6.000 5.950 *5.250 *2.500 *3.450 *4.400 *5.400 *6.050 *6.100 *5.250
*6.050 *8.650 *7.950 *9.300 *7.900
5.000 4.350 4.000 3.950 4.050
kg
*5.250 *8.800
*5.250 *8.800
Arm length 2.500 mm
*2.000 *3.300 *3.700 3.650 3.550 3.500
*2.000 2.500 2.450 2.350 2.250 2.250
A Reach from swing center *6.050 *8.650 *7.950 *9.300 *7.900 *6.050 7.250 6.850 6.800 6.900 B Bucket hook height *5.250 *8.800 *5.250 *8.800 C Lifting capacities, including
Rear outrigger
*2.000 *3.300 *3.700 3.800 3.700 3.650
1.950 2.000 1.900 1.800 1.750 1.700
Rear blade
*6.050 *8.650 *7.950 *9.300 *7.900
*6.050 5.400 5.050 5.000 5.100
Rating over front
*5.250 *8.800
*5.250 *8.800
*2.000 *3.300 *3.700 4.050 3.950 3.900
*2.000 3.000 2.950 2.800 2.750 2.700
*6.050 *8.650 *7.950 *9.300 *7.900
*6.050 *8.650 *7.950 8.650 *7.900
*5.250 *8.800
*5.250 *8.800
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
21
PW130-7
LIFTING CAPACITY
TWO-PIECE BOOM
A 6,0 m 4,5 m 3,0 m 1,5 m
Arm length
B 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg *2.700 *2.200 *2.050 *2.050 2.050 2.100 2.400 3.250 *2.700 *2.200 *2.050 *2.050 *2.150 *2.450 *2.950 *3.500 *2.700 *2.200 *2.050 *2.050 2.150 2.450 2.950 3.500 *2.700 *2.200 *2.050 *2.050 *2.150 *2.450 *2.950 *3.500 *2.100 *1.800 *1.650 *1.650 *1.750 1.950 2.200 2.800 *2.100 *1.800 *1.650 *1.650 *1.750 *2.000 *2.400 *3.300 *2.100 *1.800 *1.650 *1.650 *1.750 *2.000 *2.400 *3.300 *2.100 *1.800 *1.650 *1.650 *1.750 *2.000 *2.400 *3.300 *2.700 1.600 1.200 1.000 950 1.000 1.150 1.600 *2.700 *2.200 1.950 1.700 1.600 1.700 1.900 2.600 *2.700 1.950 1.500 1.300 1.200 1.250 1.450 1.950 *2.700 *2.200 *2.050 *2.050 2.000 2.050 2.350 3.150 *2.100 1.400 1.100 950 850 900 1.050 1.350 *2.100 *1.800 *1.650 1.550 1.500 1.550 1.750 2.250 *2.100 1.700 1.350 1.200 1.100 1.150 1.300 1.700 *2.100 *1.800 *1.650 *1.650 *1.750 1.900 2.150 2.700
3.050 2.950 2.850 2.750 2.750
1.650 1.600 1.500 1.400 1.400
Without stabilizer
*3.100 *3.550 *4.450 4.650 4.450 4.400 4.500 *3.100 *3.550 *4.450 *5.350 5.650 5.600 *4.850 *3.100 *3.350 *4.450 5.350 5.850 5.750 *4.850 *3.100 *3.550 *4.450 *5.350 *5.850 *5.750 *4.850 *3.000
2.750 2.700 2.450 2.250 2.100 2.050 2.100 *3.100 *3.550 3.850 3.600 3.450 3.400 3.450 *3.100 3.200 3.000 2.750 2.600 2.550 2.600 *3.100 *3.550 *4.450 4.400 4.200 4.150 4.250 2.750 2.750 2.550 2.300 2.100 2.050 2.100
*6.700 *5.300 *8.600 *7.150
4.700 3.850 3.900 4.000
*4.550
*4.550
Arm length 2.100 mm
*3.250 *3.600 3.600 3.500 3.500
2.450 2.350 2.250 2.200 2.150
*6.700 *5.300 *8.600 *7.150
*6.700 *5.300 6.750 6.900
A Reach from swing center B Bucket hook height *4.550 *4.550 C Lifting capacities, including
Rear outrigger
*3.250 *3.600 3.750 3.650 3.600
1.900 1.850 1.750 1.650 1.650
*6.700 5.300 8.600 7.150
5.800 4.900 4.950 5.050

Rating over front
*4.550
*4.550
Rear blade
*3.250 *3.600 *4.000 3.900 3.900
2.950 2.850 2.750 2.700 2.650
*6.700 *5.300 *8.600 *7.150
*6.700 *5.300 8.600 *7.150
*4.550
*4.550
*2.900 *3.000 3.000 2.900 2.800 2.750
1.600 1.600 1.550 1.450 1.350 1.300
Without stabilizer
*3.200 *4.150 4.700 4.500 4.400 4.450
*5.900 6.300 5.700 *8.450 *7.750
4.950 4.200 3.900 3.850 3.950
*4.200
*4.200
Arm length 2.500 mm
*2.900 *3.000 *3.400 3.650 3.500 3.500
2.500 2.500 2.400 2.300 2.200 2.150
Rear outrigger
*3.200 *4.150 *5.150 5.700 5.600 *5.200 *3.000 *3.200 *4.150 *5.150 *5.800 *5.850 *5.200 *2.900 *3.200 *4.150 *5.150 *5.800 *5.850
*3.200 3.950 3.650 3.450 3.400 3.450 *3.000 *3.200 3.100 2.800 2.650 2.550 2.600 *2.900 *3.200 *4.150 4.450 4.250 4.200
A Reach from swing center *5.900 *6.300 *5.700 *8.450 *7.750 *5.900 *6.300 *5.700 6.750 8.650 B Bucket hook height *4.200 *4.200 C Lifting capacities, including
*2.900 *3.000 *3.400 3.750 3.650 3.600
1.950 1.950 1.900 1.750 1.700 1.650
Rear blade
*5.900 *6.300 *5.700 *8.450 *7.750
*5.900 5.300 4.950 4.900 5.000
Rating over front
*4.200
*4.200
*3.000 *3.400 *3.850 3.900 3.900
3.000 2.900 2.800 2.700 2.650
*5.900 *6.300 *5.700 *8.450
*5.900 *6.300 *5.700 *8.450
*4.200
*4.200
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
22
PW130-7

A 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
Arm length
B 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m 7,5 m 6,0 m 4,5 m 3,0 m 1,5 m 0,0 m -1,5 m -3,0 m kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg *1.950 *1.600 *1.500 *1.500 *1.600 *1.750 *2.100 *2.900 *1.950 *1.600 *1.500 *1.500 *1.600 *1.750 *2.100 *2.900 *1.950 *1.600 *1.500 *1.500 1.550 1.600 1.800 2.350 *1.950 *1.600 *1.500 *1.500 *1.600 *1.750 *2.100 *2.900
*2.300 2.550 *2.200
1.700 1.650 1.600
*2.600 *2.650 *3.000 *3.450 3.600 3.550 *3.100 *2.600 *2.650 *3.000 *3.450 3.450 3.550 *3.100
*2.600 *2.650 2.650 2.500 2.350 2.300 2.400 *2.600 *2.650 *3.000 3.400 2.350 2.300 *3.100
*2.850 *3.700 *4.600 *5.250 *5.300 *4.750
*2.850 *3.700 4.050 3.800 3.700 3.750
*5.300 *6.850 *5.700 *8.250 *7.150
*5.300 *6.850 *5.700 7.750 *7.150
*4.000 *7.200
*4.000 *7.200
*2.300 2.400 *2.200
*2.300 2.300 *2.200
Outrigger front + rear
*2.850 *3.700 *4.600 *5.250 *5.300 *4.750
*2.850 *3.700 *4.600 *5.250 5.200 *4.750
*5.300 *6.850 *5.700 *8.250 *7.150
*5.300 *6.850 *5.700 *8.250 *7.150
*4.000 *7.200
*4.000 *7.200
A Reach from swing center B Bucket hook height C Lifting capacities, including
bucket (462 kg), bucket linkage (84 kg) and bucket cylinder (92 kg) Arm length 2.600 mm
Rating over front Rating over side Rating at maximum reach
23
PW130-7
STANDARD EQUIPMENT
Komatsu SAA4D102E-2 78 kW direct injection emissionised Stage II intercooled turbocharged engine Double element type air cleaner with dust indicator and auto dust evacuator Suction type cooling fan Automatic fuel line de-aeration Engine key stop Engine ignition can be password secured on request Engine overheat prevention system Auto-deceleration function Automatic engine warm-up system Alternator 24 V/40 A Batteries 2 12 V/95 Ah Starter motor 24 V/5,5 kW Standard counterweight Electronic closed-centre load sensing (E-CLSS) hydraulic system (HydrauMind) Pump and engine mutual control Dual circuit hydraulic brakes with (PEMC) system outboard wet multi-disc service Multi-function colour monitor with brakes equipment management monitoring Spring actuated park brake system (EMMS) (hydraulic release) incorporated into 4-working mode selection system; transmission Active mode, economy mode, SpaceCab, highly pressurized and breaker mode and lifting mode tightly sealed viscous mounted cab PowerMax function with tinted safety glass windows, Adjustable PPC wrist control levers pull-up type front window with for arm, boom, bucket and swing locking device, removable lower One additional 2-way service valve window, front window wiper with (full ow) intermittent feature, sun blind roller, Fully automatic 3-speed magazine rack behind seat, 12 V transmission driving through front power supply, cigarette lighter, and rear planetary axles ashtray, oor mat, machine cab Orbitrol type hydraulic steering handrails, suspension seat with acting on front wheels tiltable left hand console, automatic Oscilating front axle (7) with weight adjustment, adjustable arm automatic and manual cylinder rests and retractable seat belt, hot locking and cool box Parts book and operator manual Lockable fuel cap and covers Fuel supply pump Overload warning device Boom safety valves Climate control/Air conditioning Radio cassette preparation Toolkit and spare parts for rst service Single chassis tool box Standard colour scheme and decals Four sets of tyre and rim (twin tyre) 10.00-20 14 PR
OPTIONAL EQUIPMENT
Mono boom Two-piece boom 2,1 m; 2,5 m arms 2,6 m rotating arm Parallel blade (front and/or rear) 2 or 4 outriggers with cylinder protection Four sets of tyre and rim (single tyre) 18.00-19.5 Nokian twin tyres 10-20 Bandenmarkt twin tyres type grader 315/80 R 22.5 Komatsu quick couplers Komatsu buckets Transmission guard Clamshell grip bar Cold weather battery 120 Ah Adjust cylinder safety valve Arm cylinder safety valve Heated air suspension seat Radio-cassette OPG Level II front guard (FOPS) Additional RH boom lamp Beacon + rear facing cab lamp Additional large capacity cab roof lights (2) Bio oil Dozer blade cylinder guard Rain visor (not for use with OPG) Additional chassis tool box Customized paint
Komatsu Europe International NV

Mechelsesteenweg 586 B-1800 VILVOORDE (BELGIUM) Tel. +32-2-255 24 11 Fax +32-2-252 19 81 www.komatsueurope.com
UESS10300
04/2005
Materials and specications are subject to change without notice. is a trademark of Komatsu Ltd. Japan.
Printed in Europe This specication sheet may contain attachments and optional equipment that are not available in your area. Please consult your local Komatsu distributor for those items you may require. Materials and specications are subject to change without notice.

PW130 7

Uploaded by

Copyright:

Available Formats

PW130 7

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PW130 7

Uploaded by

Copyright:

Available Formats

NET HORSEPOWER 78 kW 105 HP @ 2.200 rpm OPERATING WEIGHT 12.770 - 15.110 kg BUCKET CAPACITY max.

Hydraulic Wheeled Excavator

HYDRAULIC WHEELED EXCAVATOR

Whats new on Dash 7:

Advanced Attachment Control

Excellent reliability and durability

HYDRAULIC WHEELED EXCAVATOR

In harmony with the environment

HYDRAULIC WHEELED EXCAVATOR

Push-button control switches

HYDRAULIC WHEELED EXCAVATOR

Application Active mode

Advantage Maximum production/power Fast cycle times

Economy mode Breaker mode Lifting mode

Easy to see and easy to use

Automatic three-speed travel

Fine tune hydraulic ow adjustment screen in B (breaker) mode

Fingertip hydraulic pump oil ow adjustment

HYDRAULIC WHEELED EXCAVATOR

Cab damper mounting for low vibration levels

Large sun roof with integrated sun shade

12-Volt power supply and (optional) radio cassette

HYDRAULIC WHEELED EXCAVATOR

Improved, wide visibility

Pump/engine room partition

Thermal and fan guards

Steps with non-skid surface and large handrail

Seat sliding range: 340 mm

Large handrail for safe access

HYDRAULIC WHEELED EXCAVATOR

Rotating arm 2.600 mm

Parallel blade Outriggers

HYDRAULIC WHEELED EXCAVATOR

HYDRAULIC WHEELED EXCAVATOR

Undercarriage attachment control

HYDRAULIC WHEELED EXCAVATOR

Safe and precise lifting

Bucket digging force*: Arm crowd force*:

* Measured with PowerMax function, 2.100 mm arm and ISO rating

HYDRAULIC WHEELED EXCAVATOR

New features: VHMS machine health monitoring

Displays running conditions and abnormality indications

Maintenance alert assistance

Operation data memory

Trouble data memory

VHMS real time monitoring system

Real time monitoring

HYDRAULIC WHEELED EXCAVATOR

Reducing maintenance costs

PW130-7 500 h 500 h 5.000 h 500 h

Designed and built for strength

Trouble data memory

Maintenance mode change

HYDRAULIC WHEELED EXCAVATOR

HYDRAULIC WHEELED EXCAVATOR

Undercarriage type Rear blade Rear outrigger 2 outriggers + blade 4 outriggers

Mono boom 12.770 kg 13.140 kg 13.590 kg 13.960 kg

Two-piece boom 13.100 kg 13.470 kg 13.920 kg 14.290 kg

Two-piece boom + rotating arm 14.110 kg 15.110 kg

Bucket digging force: Arm crowd force:

6.750 7.400 7.550 8.950 *7.200

3.550 3.700 3.600 3.550 3.500

6.750 7.400 7.550 8.950 *7.200

6.750 7.400 7.550 8.950 *7.200

3.550 3.850 *4.000 3.950 3.900

6.750 7.400 7.550 8.950 *7.200

6.750 7.400 7.550 8.650 7.200

6.050 8.650 7.950 9.300 *7.900

2.000 3.300 *3.700 3.650 3.550 3.500

2.000 3.300 *3.700 3.800 3.700 3.650

6.050 8.650 7.950 9.300 *7.900

2.000 3.300 *3.700 4.050 3.950 3.900

6.050 8.650 7.950 9.300 *7.900

6.050 8.650 7.950 8.650 7.900

6.700 5.300 8.600 7.150

3.250 3.600 3.600 3.500 3.500

6.700 5.300 8.600 7.150

6.700 5.300 6.750 6.900

3.250 3.600 3.750 3.650 3.600