SmartPTT Tutorial - MOTOTRBO Telemetry
SmartPTT Tutorial - MOTOTRBO Telemetry
SmartPTT Tutorial - MOTOTRBO Telemetry
Telemetry Settings
SmartPTT Settings
Telemetry settings in SmartPTT are done by means of Dispatcher Console. Steps to do telemetry settings: Specify list of all actions applicable to accessories connected to radios controlled by dispatching system. Menu: Settings / Telemetry Assign corresponding actions to subscribers having connected accessories. Subscriber property window. Incoming telemetry event is displayed in the subscribers Call Window and saved to event log. Outgoing telemetry command can be send from subscribers Call Window. Assigned commands are displayed in the actions menu at the right-bottom corner of the Call Window.
Example description Toy car is connected to subscriber MotoTRBO mobile radio by means of USB cable. The circuit implemented in the car allows: Controlling of the door open/closed state Turn on/off the light in the car Send command to play music in the car
Door is closed Contact 3, Incoming, Low level Door is opened Contact 3, Incoming, High level Light turn On/Off Contact 4, Outgoing, Switch level Turn on music Contact 5, Outgoing - Impulse
Description description of telemetry settings. Contact select contact number from the list. Direction select direction (incoming or outgoing). Action impulse, high level, low level, toggle level.
Elcomplus, LLC
Frunze 130a, 634021 Tomsk, Russia Tel./fax: +7 (3822) 522-511 Mobile: +7 9039505070 ICQ #: 77904200 www.smartptt.com