Es Lfu009
Es Lfu009
112" LFU009M2
Features
Unique swivel union Single access cover and modular check construction for ease of maintenance Top entry all internals immediately accessible Captured springs for safe maintenance Internal relief valve for reduced installation clearances Replaceable seats for economical repair Cast copper silicon alloy body construction for durability Ball valve test cocks screwdriver slotted Large body passages provides low pressure drop Compact, space saving design No special tools required for servicing
Test Cock No. 3 Ball Type Test Cocks Test Cock No. 2 First Check Module Assembly
Specifications
A Reduced Pressure Zone Assembly shall be installed at each potential health hazard location to prevent backflow due to backsiphonage and/ or backpressure. Lead Free* reduced pressure zone assemblies shall be constructed using Lead Free* materials. Lead Free assemblies shall comply with state codes and standards, where applicable, requiring reduced lead content. The assembly shall consist of an internal pressure differential relief valve located in a zone between two positive seating check modules with captured springs and silicone seat discs. Seats and seat discs shall be replaceable in both check modules and the relief valve. There shall be no threads or screws in the waterway exposed to line fluids. Service of all internal components shall be through a single access cover secured with stainless steel bolts. The assembly shall also include two resilient seated isolation valves, four resilient seated test cocks and an air gap drain fitting. The assembly shall meet the requirements of: USC Manual 8th Edition; ASSE Std. 1013; AWWA Std. C511; CSA B64.4. Shall be a Watts Series LFU009. Does not indicate approval status. Refer to Page 2 for approved sizes & models.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Now Available
* The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
Available Models
Prefix: U Suffix: QT S SH union connections quarter-turn ball valves bronze strainer stainless steel ball valve handles
Pressure Temperature
Maximum Working Pressure: 175psi (12 bar) Temperature Range: 33F 180F (0.5C 82C)
Standards
USC Manual 8th Edition ASSE No. 1013 AWWA C511-92 CSA B64.4 IAPMO File No. 1563. Does not indicate approval status. See below for approved models.
NOTICE
The installation of a drain line is recommended. When installing a drain line, an air gap is necessary (see ES-AG/EL/TC).
Materials
Body: Lead Free* cast copper silicon alloy Discs: Silicone rubber Check Seats: Replaceable polymer Relief Valve Seat: Removable stainless steel Cover Bolts: Stainless steel Standardly furnished with NPT body connections.
Approvals
ASSE, AWWA, CSA, IAPMO Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California. Approved models QT, AQT, PC. UL Classified (Models with LF Suffixes)
NOTICE
Inquire with governing authorities for local installation requirements
A
in. mm in. mm in. mm lbs. kgs.
1
909AGA
4"12" 009,
4" LF009M2/M3 4"1" LF009/909, 1 25 314 83 478 124 1.50 .7 1"112" LF009M2 114"2" LF009M1, 2 51 438 111 634 171 3.25 1.5 1 1 4"3" LF009/909, 2" LF009M2, 4"6" LF993 4"6" LF909, 3 76 638 162 958 243 6.25 2.8 8"10" LF909M1 8"10" LF909 4 102 738 187 1114 286 15.50 7.0 1 1 3 4" 2" LF009, 4" LF009M2/M3 3 4"1" LF009/909 238 60 238 60 .38 .2 114"-2" LF009M1, 358 92 358 92 2 .9 114"2" LF009/909, 2" LF009M2, 4"6" LF993 212"3" LF009/909
3 3
Epoxy coated
C B
LFU009QT
Model size (dn) dimensions Weight
Capacities
Performance as established by an independent testing laboratory. kPa psi 138 20
1
kPa psi 207 30 172 25 103 15 138 20 69 10 103 15 69 10 35 5 35 5 0 0 0 1 2 3 4 5 6 7 8 9 10 gpm 0 0 P P 0 10 20 30 40 50 60 70 80 90 100 110 120 140 160 180 gpm 0 3.8 7.6 11 15 19 23 27 30 34 38 lpm 0 38 76 114 152 190 228 266 304 342 380 418 456 532 608 684 lpm 7.5 fps 5 7.5 10 15 fps 2.3 mps 1.5 2.3 3.0 4.6 mps kPa psi 172 25 138 20 103 15 69 10 35 5 0 0 P 0 5 10 15 20 0 19 38 57 76 5 7.5 1.5 2.3 25 30 gpm 95 114 lpm 15 fps 4.6 mps THESE 4 CHARTS ARE OUT; NO GOOD.
3
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 gpm 0 19 38 57 76 95 114 133 152 171 190 209 228 247 266 285 lpm 7.5 15 fps 2.3 4.6 mps
kPa psi 172 25 138 20 103 15 69 10 35 5 0 0 80 gpm P 0 10 20 30 40 50 60 70 0 38 76 114 152 190 228 266 304 lpm 5 7.5 10 15 fps 1.5 2.3 3.0 4.6 mps
kPa psi 207 30 172 25 138 20 103 15 69 10 35 5 0 0 0 10 20 30 40 50 60 70 80 90 100 110 120 gpm P 0 38 76 114 152 190 228 266 304 342 380 418 456 lpm 5 7.5 10 15 fps 1.5 2.3 3.0 4.6 mps
USA: Tel: (978) 688-1811 Fax: (978) 794-1848 www.watts.com Canada: Tel: (905) 332-4090 Fax: (905) 332-7068 www.watts.ca
ES-LFU009
1318
2013 Watts