Shielded High SRF Inductors - 0805PS

Document 265-1
Shielded High SRF Inductors 0805PS

Higher SRF and than our other power inductors High inductance with tight tolerance Excellent current handling for a part this size
Designers Kit C348 contains 6 of each part Core materialCeramic/Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Weight 57.6 62.4 mg Ambient temperature 40C to +65C with Irms current, +65C to +105C with derated current Storage temperature Component: 40C to +105C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1500/7reel; 7500/13 reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 2.34 mm pocket depth PCB washing Only pure water or alcohol recommended
DCR4 L2 SRF5 Isat6 Part 10% Q min3 max typ Irms7 number1 (H) at1 MHz (Ohms) (MHz) (A) (A) 0805PS-102KL_ 1.0 21 0.14 340 0.90 1.6 0805PS-152KL_ 1.5 21 0.18 265 0.85 1.3 0805PS-272KL_ 2.7 21 0.35 190 0.60 0.88 0805PS-332KL_ 3.3 21 0.50 180 0.55 0.70 0805PS-392KL_ 3.9 21 0.74 165 0.50 0.61 0805PS-472KL_ 4.7 21 0.85 155 0.43 0.59 0805PS-562KL_ 5.6 21 0.91 143 0.38 0.57 0805PS-682KL_ 6.8 21 1.37 118 0.32 0.46 0805PS-103KL_ 10 21 1.51 66 0.27 0.43 0805PS-153KL_ 15 21 2.04 34 0.22 0.34 0805PS-223KL_ 22 25 2.48 22 0.18 0.33 0805PS-333KL_ 33 25 3.00 17 0.16 0.28 0805PS-473KL_ 47 25 3.85 15 0.15 0.26 0805PS-683KL_ 68 28 4.42 12 0.12 0.24 0805PS-823KL_ 82 30 6.00 12 0.11 0.21 0805PS-104KL_ 100 32 6.96 9.0 0.10 0.19 0805PS-124KL_ 120 32 7.51 7.7 0.10 0.18 0805PS-154KL_ 150 32 8.33 5.0 0.08 0.18 0805PS-224KL_ 220 32 13.71 5.0 0.07 0.14 0805PS-334KL_ 330 32 20.53 3.5 0.06 0.11
1. When ordering, please specify packaging code: 0805PS-334KLC Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1500parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500parts per full reel). 2. Inductance measured at 100 kHz, 0.1 Vrms, using a Coilcraft SMDA fixture in Agilent/HP4263B LCR meter. 3. Q measured on an Agilent/HP4291 with an Agilent/HP16193 test fixture. 4. DCR measured on a micro-ohmmeter and a Coilcraft CCF840 test fixture. 5. SRF measured using an Agilent/HP8753D network analyzer and a Coilcraft SMD-D test fixture. 6. DC current at which the inductance drops 10% (typ) from its value without current. 7. Current that causes a 40C temperature rise from 25C ambient. 8. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering.
US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 265-1 Revised 03/14/12

Coilcraft Inc. 2012 This product may not be used in medical of high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information.
Document 265-2
Power Chip Inductors - 0805PS Series

Typical L vs Frequency Typical L vs Current
1000
330 H
1000
330 H 100 H
100
100 H
100
Inductance (H)
10
10 H 3.3 H 1 H
Inductance (H)
10
10 H 3.3 H 1 H
0.1
0.01
0.1
10
0.1
10
100
1000
Frequency (MHz)
Current (mA)
B F C D I A E G J I
Typical Q vs Frequency
70 60 50
330 H
Q factor
40
100 H
30 20 10 0 0.1 1
1 H 3.3 H 10 H
Terminal wraparound: approx 0.010/0,25 both ends
Recommended Land Pattern
A B C max max max D E F G H I J 0.133 0.118 0.079 0.053 0.080 0.050 0.020 0.070 0.040 0.030 inches 3,38 3,00 2,00 1,35 2,03 1,27 0,51 1,78 1,02 0,76 mm
10
Frequency (MHz)
Irms Derating
120 110 100
Percent of rated Irms
90 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120
Ambient temperature (C)

US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg
25C
Document 265-2 Revised 03/14/12

Coilcraft Inc. 2012 This product may not be used in medical of high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information.

Shielded High SRF Inductors - 0805PS

Uploaded by

Copyright:

Available Formats

Shielded High SRF Inductors - 0805PS

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Shielded High SRF Inductors - 0805PS

Uploaded by

Copyright:

Available Formats

Document 265-1

Shielded High SRF Inductors 0805PS

Document 265-1 Revised 03/14/12

Power Chip Inductors - 0805PS Series

Terminal wraparound: approx 0.010/0,25 both ends

Recommended Land Pattern

Percent of rated Irms

90 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120

Ambient temperature (C)

Document 265-2 Revised 03/14/12

You might also like