Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 175 views

    5 Oct 2010

    Uploaded by

    Shriramkumar Singh
    This document contains 7 questions regarding engineering mechanics on topics including: 1) Equivalent force systems and reactions for supported beams and blocks 2) Minimum forces needed to lift wedges and moments of inertia 3) Locating centroids of composite areas 4) Determining member forces in trusses and frames 5) Velocity and forces for moving blocks on inclined planes and circular paths 6) Velocity and spring constants for collars and pellets moving on inclined rods and loops 7) Velocities after impacting balls and linkages using centers of rotation The questions involve calculating values for forces, velocities, centroids, energies and more using principles of mechanics. Diagrams provide visual representations of the various physical systems

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    5 Oct 2010

    Uploaded by

    Shriramkumar Singh
    175 views3 pages
    This document contains 7 questions regarding engineering mechanics on topics including: 1) Equivalent force systems and reactions for supported beams and blocks 2) Minimum forces needed to lift wedges and moments of inertia 3) Locating centroids of composite areas 4) Determining member forces in trusses and frames 5) Velocity and forces for moving blocks on inclined planes and circular paths 6) Velocity and spring constants for collars and pellets moving on inclined rods and loops 7) Velocities after impacting balls and linkages using centers of rotation The questions involve calculating values for forces, velocities, centroids, energies and more using principles of mechanics. Diagrams provide visual representations of the various physical systems

    Original Title

    5-OCT-2010

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 7 questions regarding engineering mechanics on topics including: 1) Equivalent force systems and reactions for supported beams and blocks 2) Minimum forces needed to lift wedges and moments of inertia 3) Locating centroids of composite areas 4) Determining member forces in trusses and frames 5) Velocity and forces for moving blocks on inclined planes and circular paths 6) Velocity and spring constants for collars and pellets moving on inclined rods and loops 7) Velocities after impacting balls and linkages using centers of rotation The questions involve calculating values for forces, velocities, centroids, energies and more using principles of mechanics. Diagrams provide visual representations of the various physical systems

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    175 views3 pages

    5 Oct 2010

    Uploaded by

    Shriramkumar Singh
    This document contains 7 questions regarding engineering mechanics on topics including: 1) Equivalent force systems and reactions for supported beams and blocks 2) Minimum forces needed to lift wedges and moments of inertia 3) Locating centroids of composite areas 4) Determining member forces in trusses and frames 5) Velocity and forces for moving blocks on inclined planes and circular paths 6) Velocity and spring constants for collars and pellets moving on inclined rods and loops 7) Velocities after impacting balls and linkages using centers of rotation The questions involve calculating values for forces, velocities, centroids, energies and more using principles of mechanics. Diagrams provide visual representations of the various physical systems

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    THE INSTITUTION OF ENGINEERS, BANGLADESH

    AMIE SECTION A EXAMINATION, OCTOBER 2010


    SUBJECT: ENGINEERING MECHANICS
    Full Marks: 100 Time: 3 Hours
    [N.B: The figures in the margin indicate full marks. There are SEVEN questions in this paper. Answer any FIVE]
    ===============================================================================================================================

    1. (a) Replace the 600 N force, as shown in Fig. 1(a), by (i) an equivalent force-couple system at C (ii) an equivalent
    system formed by two parallel forces at B and C.
    (b) A light bar AD is supported from a cable BE, as shown in Fig. 1(b) and supports a 20 kg block at C. the
    extremities A and D of the bar are in contact with frictionless vertical walls. Determine the tension in cable BE
    and the reactions at A and D.
    2. (a) Determine the smallest force P needed to lift the 3000 N force, as shown in Fig. 2(a). The co-efficient of static
    friction between A and C and between B and D is
    x
    =.3 and between A and B is
    x
    =.4. Neglect the weight
    of each wedge.
    (b) Determine the moment of inertia of the shaded area, as shown in Fig. 2(b), about the y=axis.
    3. (a) Locate the centroid x and y of the shaded area as shown in Fig. 3(a).
    (b) Locate the centroid of the composite area, as shown in Fig. 3(b).

    4. (a) Determine force in member CE and EF of the truss shown in Fig. 4(a).
    (b) Determine the reactions at the fixed support E and the smooth support A of the frame as shown in Fig. 4(b).
    The pin, attached to member BD, passes through a smooth slot at D.


    THE INSTITUTION OF ENGINEERS, BANGLADESH
    AMIE SECTION A EXAMINATION, OCTOBER 2010
    SUBJECT: ENGINEERING MECHANICS
    Full Marks: 100 Time: 3 Hours
    [N.B: The figures in the margin indicate full marks. There are SEVEN questions in this paper. Answer any FIVE]
    ===============================================================================================================================


    5. (a) The 125 kg concrete block A, as shown in Fig. 5(a), is released from rest and pulls the 200 kg log up the 3
    ramp. If the coefficient of kinetic friction between the log and the ramp is 0.5, determine the velocity of the block
    as it hits the ground at B.
    (b) If the 2 kg block passes over the top B of the circular portion of the path with a velocity of 3.5 m/ s, as shown
    in Fig. 5(b), calculate the magnitude N
    B
    of the normal force exerted by the path on the block. Determine the
    maximum speed F which the block can have at A without losing contact with the path.
    6. (a) The 0.9 kg collar is released from rest at A, as shown in Fig. 6(a), and slides freely up the inclined rod, striking
    the stop at B with a velocityF . The spring of stiffness k =24 N/ m has an unstretched length of 375 mm, calculate
    V.
    (b) A 200-g pellet, as shown in Fig. 6(b), is released from rest at A, when the spring is compressed 75 mm and
    travels around the loop ABCDE. Determine the smallest value of the spring constant for which the pellet will
    travel around the loop and will, at all times, remain in
    contact with the loop.


    THE INSTITUTION OF ENGINEERS, BANGLADESH
    AMIE SECTION A EXAMINATION, OCTOBER 2010
    SUBJECT: ENGINEERING MECHANICS
    Full Marks: 100 Time: 3 Hours
    [N.B: The figures in the margin indicate full marks. There are SEVEN questions in this paper. Answer any FIVE]
    ===============================================================================================================================

    7. (a) The two identical steel balls moving with initial velocities F
    A
    and F
    B
    collide, as shown in Fig. 7(a). If the
    coefficient of restitution is e =0.7. determine the velocity of each ball just after impact and percentage loss of
    system kinetic energy.

    (b) Arm OB of the linkage, as shown in Fig. 7(b), has a clockwise angular velocity of 10 rad/ s in the position
    shown where 0 =45. Determine the velocity of A, the velocity of D and angular velocity of link AB for the
    position shown. Solve the problem using the instantaneous centre of rotation method.

    You might also like