Micrometer List of Products Move To Other Products

Mitutoyo General Catalog
Micrometer
Move to other products
1
SPC
Caliper
Depth gage
Height gage
List of products
Digimatic Micrometer
SERIES 293
Quickmike
SERIES 293, 369, 422
Digimatic Micrometers
SERIES 293
Outside Micrometers
SERIES 101
Outside Micrometers
SERIES 102
Quick-Setting Outside Micrometers

SERIES 293, 102
Outside Micrometers
SERIES 103
Outside Micrometers
SERIES 340, 104
Outside Micrometers
SERIES 105
Outside Micrometers
SERIES 406, 106
Spline Micrometers
SERIES 331, 111
Point Micrometers
SERIES 342, 142, 112
Crimp Height Micrometers

SERIES 342, 142, 112
V-Anvil Micrometers
SERIES 314, 114
Tube Micrometers
SERIES 395, 295, 115
Universal Micrometers
SERIES 116
"Uni-Mike"
SERIES 317, 117
Sheet Metal Micrometers

SERIES 389, 189, 119, 118
Blade Micrometers
SERIES 422, 122
Disk Micrometers
SERIES 323, 223, 123
Paper Thickness Micrometers

SERIES 169
Disk Micrometers
SERIES 369, 169
Screw Thread Micrometers

SERIES 125
Gear Tooth Micrometers

SERIES 324, 124

SERIES 326, 126
Can Seam Micrometers

SERIES 347, 147
Hub Micrometers
SERIES 147
Wire Micrometers
SERIES 147
Digit Outside Micrometers

SERIES 193
Caliper Type Micrometers

SERIES 343, 143
SERIES 227
Low Force Micrometers

SERIES 227
Digimatic Bench Micrometer

SERIES 121
Snap Meters
SERIES 523
Dial Snap Meters

SERIES 523
Indicating Micrometers
SERIES 510
Outside Micrometers
SERIES 107
Limit Micrometers
SERIES 113
Optical Flats
SERIES 158
Optical Parallels
SERIES 157
Micrometer Standards
SERIES 167
Standards for Screw Thread Micrometers

SERIES 167
Standards for V-Anvil Micrometers

SERIES 167
3-Wire Units
SERIES 313
Micrometer Stands
SERIES 156
Groove Micrometers
SERIES 146
Depth Micrometers
SERIES 329, 229, 129
Depth Micrometers
SERIES 128
Micrometer
6
Inside micrometer
Micrometer head
Indicator
Test indicator
10 Gage head
11 Gauge Block
12 Reference gage
13 Surface plate
14 Miscellaneous
15 Linear scale
16 Digimatic scale unit
17 Profile projector
18 Microscope
19 Contracer
20 Surftest
21 Formtracer
22 Roundtest
23 Hardness tester
24 CMM
25 Flexible measuring
gage
26 Vision measuring
system
27 Detailed shape
measuring system
28 Laser scan micrometer

29 DIY tools
Digimatic Micrometer
SERIES 293 with Dust/Water Protection Conforming to IP65 Level
MICROMETERS
293-330
FEATURES
IP65 protection level, enabling use in environments exposed to
cutting oil, etc*. *Anti-corrosion treatment is required after use.
Measurement data output function is available with a waterresistant connection cable.
Oil-resistance materials are used in all plastic components.
1 m instrumental error (75 mm/3 or less range models)
Auto power ON/OFF function.
Certificate of inspection* is included. (50mm/2 or less range
models) *It is not the type used to obtain calibration certificates.
293-250
Technical Data
Display:
Functions:
LCD
Origin-Set, Zero-Setting, Data hold, Automatic power on/off,
inch/mm conversion (inch/mm type only), Data output
Battery:
SR44 (1 pc.) (938882)
Battery life:
Approx. 1.2 years under normal use
Maximum response speed: Unlimited
Dust/Water protection level: Conforming to IP65
Alarm:
Low voltage, counting value composition error
Operating temperature: 0C to 40C
293-230
293-231
293-233
SPC cable with data switch
293-232
05CZA662: 1m
05CZA663: 2m
OPTIONAL ACCESSORIES
Order No.
05CZA662
05CZA663
(See page 130.)
(See page 276.)
Certificate of inspection
88
Description
SPC cable with data switch (1m)
SPC cable with data switch (2m)
Micrometer stands
Gauge block set for micrometer isnpection
2.3
18
Unit: mm
L
14.5
47.2 2.3 3
43
17
5
0
6.35
C
18
27.5
45
4.2
44
17
43
Unit: mm
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
200 - 225mm
225 - 250mm
250 - 275mm
275 - 300mm
L
0
25
50
75
132.8
158.2
183.6
208.8
234.2
258
284
309
a
9
9.8
12.6
14
5.3
5.7
6.1
6.3
6.7
5.5
6.5
6.5
b
25
32
47
60
16.7
18.8
19.1
18.2
16.8
18
18
18
c
(59.8)
(70.3)
(91.6)
(112.9)
(76.5)
(91)
(103.1)
(115.3)
(126.8)
(139.8)
(152.3)
(166)
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
200 - 225mm
225 - 250mm
250 - 275mm
275 - 300mm
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Metric
Range
0 - 25mm
Inch/Metric
With ratchet stop

Order No.
293-230 / 293-240*
293-231 / 293-241*
293-232 / 293-242*
293-233 / 293-243*
293-250
293-251
293-252
293-253
293-254
293-255
293-256
293-257
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
1m
1m
1m
2m
2m
2m
3m
3m
3m
4m
4m
4m
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
4" - 5"
5" - 6"
6" - 7"
7" - 8"
8" - 9"
9" - 10"
10" - 11"
11" - 12"
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
1m
1m
1m
2m
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Resolution
0.001mm
Accuracy
1m
Range
0 - 1"
1" - 2"
*without SPC data output
Accuracy
.00005"
.00005"
.00005"
.0001"
.0001"
.0001"
.00015"
.00015"
.00015"
.0002"
.0002"
.0002"
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.00005"
.00005"
.00005"
.0001"
With friction thimble

Order No.
293-335 / 293-348*
293-336
*without SPC data output
89
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
With ratchet thimble

Order No.
293-334 / 293-344*
293-345*
293-346*
293-347*
Inch/Metric

Order No.
293-238 / 293-248*
Order No.
293-330 / 293-340*
293-331 / 293-341*
293-332 / 293-342*
293-333 / 293-343*
293-350
293-351
293-352
293-353
293-354
293-355
293-356
293-357
Inch/Metric

Order No.
293-234 / 293-244*
293-235 / 293-245*
293-236 / 293-246*
293-237 / 293-247*
With ratchet stop
Resolution
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.00005"
.00005"
MICROMETERS
42.5
18
30.7
L
2.8
6.35
Dimensions
Quickmike
SERIES 293, 369, 422 IP-54 Absolute Digimatic Micrometers
293-667
MICROMETERS
369-666
293-668
293-669
FEATURES
The Quickmake provides a speedy spindle feed of 10mm per

thimble rotation as compared to the conventional micrometer
with 0.5mm per rotation. Its wide 30mm measuring range allows
various workpieces with different shapes to be measured quickly.
Large LCD digits of 7.5mm height for error-free reading.

Non-rotating spindle and the new ratchet friction thimble.
With absolute linear scale.
IP54 level water resistance protection (when not connected with
data output cable).
Stainless steel spindle.
With SPC data output.
With a standard bar to set the origin point (for models with a
range over 30mm).
SPECIFICATION
Metric
Range
0 - 30mm
25 - 55mm
50 - 80mm
75 - 105mm
Order No.
293-666
293-661-10*
293-667
293-668
293-669
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
*Without SPC data output
Accuracy
2m
2m
2m
3m
3m
Mass
275g
275g
355g
525g
625g
Absolute scale
with origin point
Detector
Scale
Excluding quantizing error
Inch/Metric
Range
0 - 1.2"
1" - 2.2"
2" - 3.2"
3" - 4.2"
Order No.
293-676
293-677
293-678
293-679
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.00008"
.00008"
.00012"
.00012"
Mass
.61 lbs.
.78 lbs.
1.16 lbs.
1.38 lbs.
90
Quick feeding
mechanism
Lead screw
10mm/rev.
369-411
Metric
Metric
Disk type
Range
0 - 30mm
25 - 55mm
Order No.
369-411
369-412
Resolution
0.001mm
0.001mm
Accuracy
4m
4m
Mass
360g
490g
Range
0 - 30mm
25 - 55mm
Blade type
Order No.
422-411
422-412
Resolution
0.001mm
0.001mm
Inch/Metric
Range
0 - 1.2"
1" - 2.2"
Inch/Metric
Resolution
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.00016"
.00016"
Mass
.79 lbs.
1.08 lbs.
Range
0 - 1.2"
1" - 2.2"
Mass
350g
490g
Blade type
Order No.
422-421
422-422
Resolution
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.00012"
.00012"
Mass
.77 lbs.
1.08 lbs.
Metric
Accuracy
3m
3m
Disk type
Order No.
369-421
369-422
MICROMETERS
422-411
342-451
Crimp height type
Range
0 - 15mm
Order No.
342-451
Resolution
0.001mm
Accuracy
3m
Mass
275g
Dimensions
a
32
69.6
24.9
0.75
Series 369
0.75
LCD
Origin-Set, Zero-Set, power on/off, inch/mm conversion (inch/
mm type only), SPC data output*, data hold
*Not provided for 293-661-10 model
Battery:
SR44 (1 pc.) (938882)
Battery life:
Approx. 3 years (293-666, 293-661-10 and
293-676)/Approx. 1 year
Measuring force: 5 - 10N (500 - 1000gf)
Measuring faces: Carbide-tipped (293 series only)
Alarm:
Low battery voltage, scale contamination
Dust/Water protection level: Conforming to IP54
6.35
0.75
20
20
0.7
Display:
Functions:
50.4
Minimum
measuring
range
0.7
Technical Data
Unit: mm
6.5
Series 422
45
Range
0 - 30mma
25 - 55mm
50 - 80mm
75 - 105mm
a
9
11.3
13.1
13.5
d
25
36
47
60
Order No.
937387
965013
Unit: mm
0.5 (flat)
Series 342: Crimp height type
91
Description
SPC cable (1m)
SPC cable (2m)
SERIES 293
Ratchet Stop
MICROMETERS
293-805
Friction Thimble
293-816
FEATURES
SPECIFICATIONS
The world's lightest digital micrometer 215g in mass.

Simply measures 0 through 25mm (1") with resolution to
0.001mm.
Measuring faces carbide tipped.
Provided only with a zero-set key for easy origin setting. (No
spindle clamp, no data output, no auto-sleep function)
A ratchet stop or friction thimble for a constant measuring
force.
Measurement readout with large characters on the LCD screen.
Battery: SR44 (938882) x 1pc. for 1.2 years
Slim construction for easy access to the stepped feature like the
one shown.
Metric
Range
0 - 25mm
With ratchet stop

Order No.
293-805
Resolution
0.001mm
Accuracy
2m
Mass
215g
Inch/Metric
Range
0 - 1"
With ratchet stop

Order No.
293-815
Resolution
.00005"/0.001mm
Accuracy
.0001"
Mass
.47 lbs.
Inch/Metric
Range
0 - 1"

Order No.
293-816
Resolution
.00005"/0.001mm
Accuracy
.0001"
Mass
.47 lbs.
Dimensions
Unit: mm
56.3
8.8
155.3
Ratchet stop
143.2
Friction thimble
92
Outside Micrometers
SERIES 101
101-105
MICROMETERS
101-109
FEATURES
Satin-chrome-finished frame, tapered (on the anvil side) for
hard-to-reach places.
Measuring faces
Carbide-tipped measuring faces.

Designed to be operated efficiently with one hand.
Provided with a standard except for 1" model.
Flatness:
.000024"
Parallelism: .00005" for .5" model
.00008" for models up to 3"
.00012" for 3" - 4" model
SPECIFICATIONS
Dimensions
1" - 2"
2" - 3"
3" - 4"
Graduation
.0001"
.001"
.0001"
.001"
.0001"
.0001"
.0001"
1.08
Accuracy
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
.00015"
.71
Order No.
101-230
101-105
101-113
101-106
101-114
101-119
101-120
.67
1.85
Range
0 - .5"
0 - 1"
.57 .12
With ratchet stop
Inch
Unit: inch
Note: .0001" reading is obtained with vernier.
Inch
Range
0 - 1"
1" - 2"
Range
1 - 1"
1 - 2"
2 - 3"
3 - 4"

Order No.
101-109
101-117
101-110
101-118
Graduation
.001"
.0001"
.001"
.0001"
Accuracy
.0001"
.0001"
.0001"
.0001"
L
1.19
2.18
3.16
4.15
a
.11
.11
.11
.11
b
.20
.30
.37
.38
c
1.10
1.28
1.77
2.28
d
.25
.25
.25
.25
Note: The shape of the thimble changes on the model

with friction thimble.
93
Outside Micrometers
SERIES 102
102-307
MICROMETERS
102-309
FEATURES
Heat-insulated frame, tapered (on the anvil side) for hard-toreach places.
Provided with a standard except for 25mm (1") model.
Measuring faces
Flatness:
0.6m (.000024") for models of 0.01mm (.001") reading
0.3m (.000012") for models of 0.001mm (.0001") reading
Parallelism:
1m (.00004") for 25mm (1") model
2m (.00008") for models up to 100mm (4")
SPECIFICATIONS
50 - 75mm
75 - 100mm
Inch
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Graduation
0.01mm
0.001mm
0.01mm
0.001mm
0.01mm
0.01mm
Accuracy
2m
2m
2m
2m
2m
3m
Metric
Micrometer set
Range
0 - 100mm
(4 mikes/set)
Order No.
102-911
Assortment of micrometers
102-301
102-302
102-303
102-304
3 micrometer standards
With ratchet stop

Order No.
102-321
102-327
102-322
102-328
102-323
102-324
Graduation
.001"
.0001"
.001"
.0001"
.001"
.001"
Accuracy
.0001"
.0001"
.0001"
.0001"
.0001"
.00015"
Dimensions
b
14.5 3
L
a
47
27.5
17
18
25 - 50mm
With ratchet stop

Order No.
102-301
102-307
102-302
102-308
102-303
102-304
Metric
Range
0 - 25mm
Note: 0.001mm (.0001") reading is obtained with vernier.
Metric
Range
0 - 25mm
25 - 50mm
Inch
Range
0 - 1"
1" - 2"

Order No.
102-305
102-309
102-306
Graduation
0.01mm
0.001mm
0.01mm
Unit: mm
Accuracy
2m
2m
2m
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm

Order No.
102-325
102-329
102-326
102-330
Graduation
.001"
.0001"
.001"
.0001"
Accuracy
.0001"
.0001"
.0001"
.0001"
L
30.3
55.3
80.3
105.3
a
2.8
2.8
2.8
2.8
b
5
8
9
10
c
26
32
45
58
d
6.35
6.35
6.35
6.35
Note: The shape of the thimble changes on the model with

ratchet thimble.
94
Quick-Setting Outside Micrometers

SERIES 293, 102
293-151-30
MICROMETERS
102-450
102-650
Measuring faces
FEATURES
Flatness:
Parallelism:
1mm spindle thread pitch for quick setting.

The measurement can be read directly from the thimble due to
the 100 step graduation.
With Ratchet Thimble for constant force. (Ratchet Stop is also
available for the 102 series.)
The 293 series is provided with SPC output.
Dimensions
b
16
49.5
13
30.7
27.5
100 divisions
Digital model with ratchet stop

Order No.
293-151-30
293-152-30
293-153-30
293-154-30
Graduation
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
1m
1m
1m
2m
Unit: mm
16
50
17
21
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
L
a
SPECIFICATIONS
Metric
0.6m
2m
Excluding
quantizing error
Metric
Range
0 - 25mm
25 - 50mm
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
With ratchet stop

Order No.
102-450
102-451
Graduation
0.01mm
0.01mm
Accuracy
2m
2m
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm

Order No.
102-650
102-651
102-652
102-653
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
L
30
55
80
105
a
2.5
2.5
2.5
2.5
b
5
8
9
9
c
26
32.5
45
58
d
8
8
8
8
Note: The shape of the thimble changes on the digital

model.
Accuracy
2m
2m
2m
2m
95
Outside Micrometers
SERIES 103
103-139
MICROMETERS
103-137
FEATURES
Hammertone-green, baked-enamel-finished frame.

Clear graduations on satin-chrome finish.
Positive locking clamp.
Ratchet Stop or Friction Thimble for exact repetitive readings.
Inch
Range
0 - 1"
Order No.
Graduation
103-177
.001"
103-131
.0001"
1" - 2"
103-178
.001"
103-132
.0001"
2" - 3"
103-179
.001"
3" - 4"
103-180
.001"
4" - 5"
103-181
.001"
5" - 6"
103-182
.001"
6" - 7"
103-183
.001"
7" - 8"
103-184
.001"
8" - 9"
103-185
.001"
9" - 10"
103-186
.001"
10" - 11"
103-187
.001"
11" - 12"
103-188
.001"
12" - 13"
103-189
.001"
13" - 14"
103-190
.001"
14" - 15"
103-191
.001"
15" - 16"
103-192
.001"
16" - 17"
103-193
.001"
17" - 18"
103-194
.001"
18" - 19"
103-195
.001"
19" - 20"
103-196
.001"
(Models with a range up to 40" are available.)
SPECIFICATIONS
Metric
Range
0 - 25mm
With ratchet stop
Order No.
Graduation
103-137
0.01mm
103-129
0.001mm
25 - 50mm
103-138
0.01mm
103-130
0.001mm
50 - 75mm
103-139-10
0.01mm
75 - 100mm
103-140-10
0.01mm
100 - 125mm 103-141-10
0.01mm
125 - 150mm 103-142-10
0.01mm
150 - 175mm 103-143-10
0.01mm
175 - 200mm 103-144-10
0.01mm
200 - 225mm 103-145-10
0.01mm
225 - 250mm 103-146-10
0.01mm
250 - 275mm 103-147-10
0.01mm
275 - 300mm 103-148-10
0.01mm
300 - 325mm 103-149
0.01mm
325 - 350mm 103-150
0.01mm
350 - 375mm 103-151
0.01mm
375 - 400mm 293-152
0.01mm
400 - 425mm 103-153
0.01mm
425 - 450mm 103-154
0.01mm
450 - 475mm 103-155
0.01mm
475 - 500mm 103-156
0.01mm
(Models with a range up to 1000mm are available.)
With ratchet stop
Accuracy
2m
2m
2m
2m
2m
3m
3m
3m
4m
4m
4m
5m
5m
5m
6m
6m
6m
7m
7m
7m
8m
8m
Accuracy
.0001"
.0001"
.0001"
.0001"
.0001"
.00015"
.00015"
.00015"
.0002"
.0002"
.0002"
.00025"
.00025"
.00025"
.0003"
.0003"
.0003"
.00035"
.00035"
.00035"
.0004"
.0004"
Metric
Range
0 - 25mm
25 - 50mm
Measuring faces
Inch
Flatness:
0.6m (.000024") for models up to 300mm

(12")
1m (.00004") for models over 300mm (12")
Parallelism: (2+L/100)m [(.00008+.00004 (L/4))"]*
*L=Maximum measuring length (mm) [(inch)], Fraction
rounded down
Range
0 - 1"
1" - 2"

Order No.
103-125
103-133
103-126
Graduation
0.01mm
0.001mm
0.01mm

Order No.
103-127
103-135T
103-128
103-136T
Graduation
.001"
.0001"
.001"
.0001"
96
Accuracy
2m
2m
2m
Accuracy
.0001"
.0001"
.0001"
.0001"
MICROMETERS
103-913
Metric
Inch
Micrometer set
Range
0 - 75mm
(3 mikes/set)
0 - 150mm
(6 mikes/set)
Order No.
103-927-10
150 - 300mm
(6 mikes/set)
103-915-10
0 - 300mm
(12 mikes/set)
103-914-30
103-913-30
103-137, 103-138, 103-139
103-137, 103-138, 103-139-10,
103-140-10, 103-141-10, 103-142-10
103-143, 103-144, 103-145,
103-146, 103-147, 103-148
All micrometers of 103-913-30
and 103-915-10 in one set
97
Range
0 - 3"
(3 mikes/set)
0 - 4"
(4 mikes/set)
0 - 6"
(6 mikes/set)
Order No.
103-929
6" - 12"
(6 mikes/set)
103-906
0 - 12"
(12 mikes/set)
103-905
103-930
103-904
103-177, 103-178, 103-179
103-177, 103-178, 103-179, 103-180
101-105, 101-106, 103-179,
103-180, 103-181, 103-182
103-183, 103-184, 103-185,
103-186, 103-187, 103-188
All micrometers of 103-904
and 103-906 in one set
Outside Micrometers
SERIES 340, 104 with Interchangeable Anvils
MICROMETERS
340-251
104-136
FEATURES
Metric
IP65 water/dust protection level (340 series*).
Range
0 - 50mm
0 - 100mm
0 - 150mm
100 - 200mm
150 - 300mm
200 - 300mm
300 - 400mm
400 - 500mm
500 - 600mm
600 - 700mm
700 - 800mm
800 - 900mm
900 - 1000mm
*Models with a range up to 300mm (12").
Wide measuring range with interchangeable anvils.

Carbide-tipped spindle face.
Provided with a Ratchet Stop for constant force.
Supplied with zero-setting standards for each range.
The 340 series (LCD readout type) is provided with SPC output.
SPECIFICATIONS
Metric
Range
0 - 150mm
150 - 300mm
300 - 400mm
400 - 500mm
500 - 600mm
600 - 700mm
700 - 800mm
800 - 900mm
900 - 1000mm
Digital model
Order No.
340-251
340-252
340-513
340-514
340-515
340-516
340-517
340-518
340-519
Inch/Metric
Range
0 - 6"
6" - 12"
12" - 18"
18" - 24"
24" - 30"
30" - 36"
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
Interchangeable anvils
0, 25, 50, 75, 100, 125mm
0, 25, 50, 75, 100, 125mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
Resolution
.00005"/0.001mm
.0001"/0.001mm
.0001"/0.001mm
.0001"/0.001mm
.0001"/0.001mm
.0001"/0.001mm
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0, 25mm
0, 25, 50, 75mm
0, 25, 50, 75, 100, 125mm
0, 25, 50, 75mm
0, 25, 50, 75, 100, 125mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
0, 25, 50, 75mm
Graduation
.001"
.0001"
.001"
.001"
.001"
.001"
.001"
.001"
.001"
.001"
0, 1"
0, 1"
0, 1", 2", 3"
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
*The frame in a heat insulating cover
Inch
Range
0 - 2"
0 - 4"
0 - 6"
6" - 12"
12" - 18"
18" - 24"
24" - 30"
30" - 36"
36" - 42"
Digital model
Order No.
340-351
340-352
340-713
340-714
340-715
340-716
Order No.
104-171*
104-139A
104-135A
104-140A
104-136A
104-141A
104-142A
104-143A
104-144A
104-145A
104-146A
104-147A
104-148A
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
0, 1", 2", 3", 4", 5"
Order No.
104-166
104-165
104-149
104-137
104-138
104-201
104-202
104-203
104-204
104-205
Measuring faces
Flatness:
0.6m (.000024") for models up to 300mm (12")
Parallelism: (2+L/100)m [(.00008+.00004 (L/4))"]**
**L=Maximum measuring length (mm) [(inch)], Fraction rounded
up
Accuracy
(4+L/75)m [(.0002+.00005 (L/3))"]*

rounded up, Excluding quantizing error (340 series)
98
Outside Micrometers
MICROMETERS
SERIES 105 with Extension Anvil Collars
105-106
105-408
SPECIFICATIONS
Metric
Range
500 - 600mm
600 - 700mm
700 - 800mm
800 - 900mm
900 - 1000mm
1000 - 1100mm
1100 - 1200mm
1000 - 1200mm
1200 - 1300mm
1300 - 1400mm
1200 - 1400mm
1400 - 1500mm
1500 - 1600mm
1400 - 1600mm
1600 - 1700mm
1700 - 1800mm
1600 - 1800mm
1800 - 1900mm
1900 - 2000mm
1800 - 2000mm
FEATURES
Wide measuring range with extension anvil collars.
Order No.
105-103
105-104
105-105
105-106
105-107
105-408
105-409
105-418
105-410
105-411
105-419
105-412
105-413
105-420
105-414
105-415
105-421
105-416
105-417
105-422
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Extension collars
50mm
50mm
50mm
50mm
50mm
50mm
50mm
50mm, 100mm
50mm
50mm
50mm, 100mm
50mm
50mm
50mm, 100mm
50mm
50mm
50mm, 100mm
50mm
50mm
50mm, 100mm
Accuracy
(6+L/75)m*
*L=Maximum measuring length (mm), Fraction rounded up
50mm (2") spindle stroke.

Provided with Ratchet Stop for constant force.
Supplied with zero-setting standards for each range.
Square and round pipes are combined for light weight and
rigid frame (for models over 1000mm range).
Workpiece stopper (for models over 1000mm range).
Measuring faces
Flatness:
1m
Parallelism: (2+L/100)m**
**L=Maximum measuring length (mm), Fraction rounded
down
99
Outside Micrometers
SERIES 406, 106 Non-Rotating Spindle Type
MICROMETERS
406-521-30
106-101
FEATURES
Easy-to-read with large vernier on the thimble.
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Metric

Order No.
406-521-30
406-522-30
406-523-30
406-524-30
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
3m
3m
3m
4m
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm

Order No.
106-101
106-103
106-105
106-106
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
2m
2m
3m
4m
Excluding
quantizing error
Inch/Metric
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Inch

Order No.
406-721-30
406-722-30
406-723-30
406-724-30
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.00015"
.00015"
.00015"
.0002"
Excluding
quantizing error
Range
0 - 1"
1" - 2"

Order No.
106-102
106-104
Graduation
.0001"
.0001"
Measuring faces
Flatness:
0.3m (.000012")
Parallelism: 4m (.00016") for Series 406
2m (.00008") for Series 106
Diameter: 6.35mm (.25") for Series 406
8mm (.315") for Series 106
100
Accuracy
.0001"
.0001"
Spline Micrometers
SERIES 331, 111
331-251
MICROMETERS
111-115
FEATURES
IP65 water/dust protection level (331 series).
The anvil and spindle have a small diameter for measuring
splined shafts, slots, and keyways.
Anvil/Spindle Dimensions
Type A (3mm)
Unit: mm
Type B (2mm)
10 10
5 5

With Ratchet Stop for constant force.
Metric
Range
0 - 25mm
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Digital model
Order No.
331-251
331-261
331-252
331-262
331-253
331-263
331-254
331-264
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
2m
2m
2m
2m
2m
2m
3m
3m
Remarks
Type A
Type B
Type A
Type B
Type A
Type B
Type A
Type B
Inch/Metric
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Digital model
Order No.
331-351
331-361
331-352
331-362
331-353
331-363
331-354
331-364
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
.00015"
.00015"
Remarks
Type A
Type B
Type A
Type B
Type A
Type B
Type A
Type B
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
Order No.
111-115
111-215
111-116
111-117
111-118
111-119
111-120
111-121
111-122
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
3m
3m
3m
3m
4m
4m
4m
5m
5m
Remarks
Type A
Type B
Type A
Type A
Type A
Type A
Type A
Type A
Type A
Order No.
111-166
111-142
111-143
Resolution
.0001"
.001"
.001"
Accuracy
.00015"
.00015"
.00015"
Remarks
Type A
Type A
Type A
Inch
Range
0 - 1"
1" - 2"
2" - 3"
Measuring faces
Flatness:
0.3m (.000012")
Parallelism: (2+L/100)m [(.00008+.00004 (L/4))"]*
rounded up
101
Point Micrometers
SERIES 342, 142, 112
342-261
MICROMETERS
112-153
FEATURES
SPECIFICATIONS

Pointed spindle and anvil for measuring the web thickness of
drills, small grooves, keyways, and other hard-to-reach
dimensions.
15 degree and 30 degree measuring points are available.
The measuring points (carbide-tipped) have approximately
0.3mm (.012") radius.
Measuring point: 15
Measuring point: 30
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
30
15
Spherical
tips R0.3
Metric
Spherical
tips R0.3
Inch/Metric
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Dimensions
L
a
14.5 3
Order No.
342-251
342-261
342-252
342-262
342-253
342-263
342-254
342-264
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
2m
2m
2m
2m
2m
2m
3m
3m
Point
15
30
15
30
15
30
15
30
Excluding
quantizing error

The 142 series is provided with a digit counter.
Provided with a standard except for 25mm (1") models.
Digital model
47
17
Digital model
Order No.
342-351
342-361
342-352
342-362
342-353
342-363
342-354
342-364
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
.00015"
.00015"
Point
15
30
15
30
15
30
15
30
Excluding
quantizing error
42.5
Metric
c
Range
0 - 25mm
Unit: mm
Order No.
142-153
142-201
Graduation
0.01mm
0.01mm
Accuracy
3m
3m
Point
15
30
Order No.
142-177
142-225
Graduation
.001"
.001"
Accuracy
.00015"
.00015"
Point
15
30
Inch
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
L
55.3
80.3
105.3
132.8
a
12.8
12.8
12.8
15.3
b
10
12
14
17
c
38
49
60
79
d
6.35
6.35
6.35
6.35
Range
0 - 1"
Measuring points
Parallelism: 3m (.00012")
102
Metric
25 - 50mm
50 - 75mm
75 - 100mm
Order No.
112-165
112-153*
112-213
112-201*
112-166
112-154*
112-214
112-202*
112-167
112-155*
112-215
112-203*
112-168
112-156*
112-216
112-204*
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
3m
3m
3m
3m
3m
3m
3m
3m
3m
3m
3m
3m
4m
4m
4m
4m
Point
15
15
30
30
15
15
30
30
15
15
30
30
15
15
30
30
Range
0 - 1"
1" - 2"
2" - 3
Order No.
112-189
112-177*
112-237
112-225*
112-190
112-178*
112-238
112-226*
112-191
Graduation
.001"
.001"
.001"
.001"
.001"
.001"
.001"
.001"
.001"
Accuracy
.00015"
.00015"
.00015"
.00015"
.00015"
.00015"
.00015"
.00015"
.00015"
Point
15
15
30
30
15
15
30
30
15
*The points have not carbide tips.

MICROMETERS
Range
0 - 25mm
Inch
*The points have not carbide tips.
Crimp Height Micrometers

SERIES 342, 142, 112 Point Spindle and Blade Anvil
342-271
112-401
SPECIFICATIONS
Metric
0.5 (1)
Unit: mm
60 (27)
Range
0 - 25mm
Digital model
Order No.
342-271
Resolution
0.001mm
Accuracy
3m
Excluding
quantizing error
Inch/Metric
0.5
(0.6)
( ): for series 142
Range
0 - 1"

Measures the height of crimp contacts.
Order No.
342-371
Resolution
.00005"/0.001mm
Accuracy
.00015"
Excluding
quantizing error
Metric
FEATURES
Digital model
Range
0 - 25mm
Mechanical counter model

Order No.
142-402
142-403
Graduation
0.01mm
0.001mm
Accuracy
3m
3m
Note: 0.001mm reading is obtained with vernier.
Metric
Range
0 - 25mm
103
Order No.
112-401
Graduation
0.01mm
Accuracy
3m
V-Anvil Micrometers
SERIES 314, 114 3 Flutes and 5 Flutes
MICROMETERS
314-251
114-121
114-102
FEATURES
SPECIFICATIONS

Measures the outside diameter of cutting heads (such as taps,
reamers, end mills) with an odd number of flutes.
Carbide-tipped spindle.
V-anvils with a centerline groove are available. They are useful
for measuring pitch diameters of taps which have a small
diameter by using single-wire method.
Supplied with a standard for zero point adjustment.
Metric
Range
1 - 15mm
10 - 25mm
25 - 40mm
Inch/Metric
.4" - 1"
1" - 1.6"
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
4m
4m
4m
4m
5m
Remarks
w/Groove
w/Groove
Digital model for 3 flutes cutting head

Order No.
314-351
314-361
314-352
314-362
314-353
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.0002"
.0002"
.0002"
.0002"
.00025"
Remarks
w/Groove
w/Groove
Excluding
quantizing error
Wire
Spindle
Anvil
Order No.
314-251
314-261
314-252
314-262
314-253
Excluding
quantizing error
Range
.05 - .6"
Pitch Diameter Measurement of Tap

by Single-wire Method
Digital model for 3 flutes cutting head
Tap
104
Metric
Dimensions
1.5
Unit: mm
Groove
.7
14.5 3
For 3 flutes cutting head

Remarks
18
Range
5 - 25mm
2.3 - 25mm
25 - 45mm
45 - 65mm
65 - 85mm
114-102

Order No.
114-121
114-165
114-137*
114-122
114-123
114-124
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
4m
4m
4m
5m
6m
7m
Remarks
w/Groove
Accuracy
.0002"
.00025"
Remarks
Accuracy
4m
5m
Remarks
*Carbide-tipped anvil
Inch
Range
.09" - 1"
1" - 1.8"

Order No.
114-135*
114-129
Graduation
.0001"
.001"
Metric
Range
5 - 25mm
25 - 45mm

Order No.
114-151
114-152
Graduation
0.01mm
0.01mm
105
6.35
18
Accuracy
.0002"
.0002"
.00025"
.0003"
Metric
17
6.35
Graduation
.001"
.0001"
.001"
.001"
60
Order No.
114-163
114-202*
114-113
114-114
47
27.5
Range
.05 - .6"
.09" - 1"
1" - 1.6"
1.6" - 2.2"
114-204
114-101
Inch
60
(14
MICROMETERS
22
30.3
.7)
(23.46)
Remarks
w/Groove
w/Groove
Accuracy
4m
4m
4m
4m
4m
5m
6m
6m
7m
7m
14.5
2.3 - 25mm
25 - 40mm
40 - 55mm
55 - 70mm
70 - 85mm
85 - 100mm
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
60
10 - 25mm

Order No.
114-101
114-161
114-102
114-162
114-204*
114-103
114-104
114-105
114-106
114-107
0.5
Range
1 - 15mm
Range
10 - 25mm
25 - 40mm
40 - 55mm
55 - 70mm
70 - 85mm
85 - 100mm
A
6.2
19.14
32.13
45.12
58.11
71.1
Tube Micrometers
5mm
Spherical Anvil Type
5mm
SERIES 395, 295, 115 Spherical and Cylindrical Anvils
SR4
MICROMETERS
395-251
SR4
395-271
FEATURES
Designed to measure the wall thickness of various tubing.
The Tube Micrometers have two combinations of measuring
faces (carbide-tipped): spherical-flat type, and sphericalspherical type.
Cylindrical anvils (perpendicular) are also available.
115-215
Cylindrical Anvil Type
395-261
Cylindrical (Perpendicular) Anvil Dimensions
Type A
(Pin)
Type B
(Spherical)
4
6.9
6.9
Type C
(Cylindrical)
1.4
S4.7
12.7
S3.5
1.8
Unit: mm
Type D
(Cylindrical)
106
(Unit: mm)
Anvil
Type A
Type B
Type C
Type D
d
2
3.6
4.8
8.2
L
4
4
12
22
SR4
SPECIFICATIONS
Range
Order No.
Resolution
Accuracy
0 - 25mm
395-251
395-271*
395-252
395-272*
395-253
395-273*
395-254
395-274*
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
2m
2m
2m
2m
2m
2m
3m
3m
25 - 50mm
50 - 75mm
75 - 100mm
*Spherical-spherical type
Order No.
Resolution
Accuracy
0 - 1"
395-351
395-371*
395-352
395-372*
395-353
395-373*
395-354
395-374*
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
.00015"
.00015"
3" - 4"
Range
0 - 25mm
Mechanical counter model with spherical anvil

Order No.
295-115
295-215*
Graduation
0.01mm
0.01mm
Accuracy
3m
3m
Mini. ID of tubing
d: 10mm
d: 10mm
Inch
Range
0 - 1"
Mechanical counter model with spherical anvil

Order No.
295-153
295-253*
Graduation
.0001"
.0001"
Accuracy
.00015"
.00015"
Mini. ID of tubing
d: .40"
d: .40"
Digital model with spherical anvil
Range
2" - 3"
Mini. ID
of tubing
d: 15mm
d: 15mm
d: 15mm
d: 15mm
d: 19mm
d: 19mm
d: 20mm
d: 20mm
Inch/Metric
1" - 2"
Metric
Digital model with spherical anvil
MICROMETERS
Metric
Mini. ID
of tubing
d: .59"
d: .59"
d: .59"
d: .59
d: .75"
d: .75"
d: .79"
d: .79"
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
With spherical anvil

Order No.
115-115
115-215*
115-116
115-216*
115-117
115-217*
115-118
115-218*
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
3m
3m
3m
3m
3m
3m
4m
4m
Mini. ID of tubing
d: 10mm
d: 10mm
d: 11mm
d: 11mm
d: 17mm
d: 17mm
d: 18mm
d: 18mm
Accuracy
.00015"
.00015"
.00015"
.00015"
.00015"
.00015"
.0002"
Mini. ID of tubing
d: .40"
d: .40"
d: .44"
d: .44"
d: .67"
d: .67"
d: .71"
Inch
Metric
Range
0 - 25mm
Range
0 - 1"
Digital model with cylindrical anvil

Order No.
395-261
395-262
395-263
395-264
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
3m
3m
3m
3m
Remarks
Type A
Type B
Type C
Type D
Excluding
quantizing error
Inch/Metric
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
With spherical anvil

Order No.
115-153
115-253*
115-142
115-242*
115-143
115-243*
115-144
Graduation
.0001"
.0001"
.001"
.001"
.001"
.001"
.001"
Digital model with cylindrical anvil

Order No.
395-362
395-363
395-364
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.00015"
.00015"
.00015"
Remarks
Type B
Type C
Type D
Excluding
quantizing error
Metric
Range
0 - 25mm
25 - 50mm
Inch
Range
0 - 1"
With cylindrical anvil

Order No.
115-302
115-308
115-315
115-316
115-303
115-309
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Remarks
Type A
Type B
Type C
Type D
Type A
Type B
Accuracy
.00015"
.00015"
.00015"
Remarks
Type A
Type C
Type D
With cylindrical anvil

Order No.
115-305
115-313
115-314
Graduation
.001"
.0001"
.0001"
107
Accuracy
3m
3m
3m
3m
3m
3m
Universal Micrometers
SERIES 116 Interchangeable Anvil Type
116-101
SPECIFICATIONS
Non-rotating spindle with seven interchangeable anvils (flat,

spline, spherical, point, knife-edge, disk, and blade) for a wide
range of applications.
Interchangeable anvils (pair) are optional.
V-anvils and conical spindle tips (matching pair) for screw
thread measurement are also available.
Metric
Range
0 - 25mm
25 - 50mm
116-840
Order No.
116-105
116-106
Graduation
.001"
.001"
Accuracy
.0002"
.0002"
V-anvil and conical spindle tip
Assortment of anvils and tips

0.4 - 0.5mm/64 - 48TPI (116-831)
0.6 - 0.9mm/44 - 28TPI (116-832)
1 - 1.75mm/24 - 14TPI (116-833)
2 - 3mm/13 - 9TPI (116-834)
3.5 - 5mm/8 - 5TPI (116-835)
5.5 - 7mm/4.5 - 3.5TPI (116-836)
60 - 48TPI (116-841)
48 - 40TPI (116-842)
40 - 32TPI (116-843)
32 - 24TPI (116-844)
24 - 18TPI (116-845)
18 - 14TPI (116-846)
14 - 10TPI (116-847)
10 - 7TPI (116-848)
7 - 4.5TPI (116-849)
4.5 - 3.5TPI (116-850)
116-830
Flat
Unit: mm
20
116-801
Assortment of anvils
Flat anvils (116-801)
Spline anvils (116-802)
Spherical anvils (116-803)
Point anvils (116-804)
Knife-edge anvils (116-805)
Disk anvils (116-806)
Blade anvils (116-807)
Unit: mm
Point
4.5
4.5
116-803
116-802
Unit: mm
Disk
Blade
0.75
4.5
4.5
116-806
116-805
108
1.5
116-804
Unit: mm
6.3
45
0.1
3.5
55
11.1
0.3
3.5
0.4
4.5
Unit: mm
Spherical
R4
Unit: mm
Knife-edge
Unit: mm
Spline
6
Order No.
116-800
15.5
4.5
Interchangeable Anvils Set (Optional)

Applications
Multi-purpose
measurements
Unit: mm
3.5
Screw thread
measurements
(Whitworth screw)
Accuracy
4m
4m
3.5
Order No.
116-830
Graduation
0.01mm
0.01mm
Applications
Screw thread
measurements
(Metric screw,
Unified screw)
Order No.
116-101
116-102
Inch
Range
0 - 1"
1" - 2"
V-Anvils and Conical Spindle Tips Sets (Optional)
MICROMETERS
FEATURES
4.5
116-807
"Uni-Mike"
SERIES 317, 117 Interchangeable Anvil Type
MICROMETERS
317-251
117-101
FEATURES
SPECIFICATIONS

Measures tubing thickness, shoulder-edge distance, rivet head
height, etc. with interchangeable anvils (flat anvil, rod anvil, Vanvil).
Supplied with Flat Anvil (201216) and Rod Anvil: 3mm rod
anvil (201217) for 0-25mm (0-1") models, 5mm (201379) for
25-50mm (1"-2") model.
With special Disk Anvils. The
Uni-Mike is used as a height
micrometer. The disks have a
lapped, mirror surface.
Metric
Range
0 - 25mm
25 - 50mm

Order No.
317-251
317-252
Resolution
0.001mm
0.001mm
Accuracy
4m
4m
Excluding
quantizing error
Inch/Metric
Range
0 - 1"
1" - 2"
Digital model with friction thimble

Order No.
317-351
317-352
Resolution
00005"/0.001mm
00005"/0.001mm
Accuracy
.0002"
.0002"
Excluding
quantizing error
Metric
Provided with a standard

except for 25mm (1") model.
Range
0 - 25mm
25 - 50mm
With ratchet stop

Order No.
117-101
117-102
Inch
Dimensions
52.5(27.5)
Graduation
001"
001"
0.6m (.000024") for spindle face

2m (.00008") for anvil face
6.35
25
1.5
V-anvil
(Optional) Flat anvil
(Standard
3 (for 25mm)
accessory)
117-102 (117-101)
Order No.
117-107
117-108
Flatness:
120
5 (for 50mm)
Rod anvil
(Standard accessory)
Order No.
201218
950758
950759
109
Accuracy
4m
4m
Measuring faces
25
7
34
26.5
Unit:mm
27.5
6.35
25(0)
18
1.5
Range
0 - 1"
1" - 2"
Graduation
0.01mm
0.01mm
Description
V-anvil
Disk anvil for 25mm (1") models
Disk anvil for 50mm (2") models
Accuracy
.0002"
.0002"
Sheet Metal Micrometers

SERIES 389, 189, 119, 118
118-102
389-251
MICROMETERS
119-202
Anvil-Spindle Combinations
Metric
Standard
(Flat-Flat)
SphericalFlat
Range
0 - 25mm
SphericalSpherical
FEATURES
Range
0 - 1"
25 - 50mm
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
Inch/Metric
1" - 2"
Accuracy
4m
4m
4m
5m
4m
4m
4m
Throat
160mm
160mm
160mm
300mm
165mm
165mm
165mm
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
*Spherical anvil and flat spindle

**Spherical anvil and spherical spindle
Accuracy
.0002"
Throat
6"
Accuracy
4m
4m
4m
4m
5m
4m
Throat
100mm
150mm
150mm
150mm
300mm
150mm
Accuracy
.0002"
.0002"
.0002"
.00025"
.0002"
Throat
6"
6"
6"
12"
6"
Accuracy
4m
Throat
50mm

Order No.
189-129
Resolution
.0001"
Order No.
118-101
118-102
118-114*
118-118**
118-103
118-110
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Excluding
quantizing error
Inch
Range
0 - 1"
1" - 2"
Order No.
118-129
118-116*
118-120**
118-107
118-112
Metric
Accuracy
.0002"
.0002"
.0002"
.00025"
.0002"
.0002"
.0002"
Throat
6"
6"
6"
12"
6"
6"
6"
Excluding
quantizing error
Graduation
.0001"
.0001"
.0001"
.001"
.001"

Digital model
Order No.
389-351
389-361*
389-371**
389-713
389-352
389-362*
389-372**
Throat
150mm

Digital model

Range
0 - 1"
Range
0 - 25mm
25 - 50mm
Order No.
389-251
389-261*
389-271**
389-513
389-252
389-262*
389-272**
Accuracy
4m
Metric

The 119 series is provided with a dial for making easy and quick
reading.
SPECIFICATIONS
Resolution
0.01mm
*Except for 389-513
Range
0 - 25mm
Order No.
189-102
Inch
Measures thickness of sheet metal, paper, plastic, and rubber

parts.
IP65 water/dust protection level (389 series*).
Metric
Range
0 - 25mm
Dial reading model

Order No.
119-202*
Resolution
0.01mm
Measuring faces
Flatness:
0.6m (.000024") for models with 150mm(6")

or less throat depth
1m (.00004") for models with 300mm (12")
throat depth
110
Blade Micrometers
422-111-30
MICROMETERS
122-101
FEATURES
The anvil and the spindle have a blade for measuring the
groove diameter of shafts, keyways, and other hard-to-reach
portions.
0.4
0.75
Metric
4
6
7
11
Range
0 - 25mm
6.5
60
6.5
60
R8
0.75
Unit: mm
0.4
R8
0.75
Blade Dimensions
Type B
Type A
Type D
Type C
(carbide-tipped) (carbide-tipped)
25 - 50mm

SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Digital model
Order No.
422-111-30
422-141-30
422-121-30
422-151-30
422-112-30
422-142-30
422-113-30
422-114-30
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
3m
3m
3m
3m
3m
3m
3m
4m
Remarks
Type A
Type B
Type C
Type D
Type A
Type B
Type A
Type A
Excluding
quantizing error
Inch/Metric
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.00015"
.00015"
.00015"
.00015"
.00015"
.00015"
.00015"
.0002"
Remarks
Type A
Type B
Type C
Type D
Type A
Type B
Type A
Type A
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
3m
3m
3m
3m
3m
3m
3m
3m
3m
4m
4m
4m
5m
5m
Remarks
Type A
Type B
Type C
Type D
Type A
Type B
Type C
Type D
Type A
Type A
Type A
Type A
Type A
Type A
Order No.
122-125
122-135
122-151
122-126
122-136
122-127
122-128
Graduation
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
Accuracy
.00015"
.00015"
.00015"
.00015"
.00015"
.00015"
.0002"
Remarks
Type A
Type B
Type D
Type A
Type B
Type A
Type A
Inch
Range
0 - 1"
1" - 2"
Digital model
Order No.
422-311-30
422-341-30
422-321-30
422-351-30
422-312-30
422-342-30
422-313-30
422-314-30
Order No.
122-101
122-111
122-161
122-141
122-102
122-112
122-162
122-142
122-103
122-104
122-105
122-106
122-107
122-108
2" - 3"
3" - 4"
Measuring faces
Parallelism: 3m (.00012") for models up to 50mm (2")

(3+L/100)m [(.00012+.00004 (L/4))"]
for models over 50mm (2")*
* L=Maximum measuring length (mm) [(inch)], Fraction
rounded up
Excluding
quantizing error
111
Disk Micrometers
SERIES 323, 223, 123
MICROMETERS
323-511-30
123-101
FEATURES
Metric
The Disk Micrometer is designed to easily measure root tangent

length of spur gears and herical gears.
Diameter of measuring disk: 20mm (.79")
0.7mm edge thickness to enter narrow recesses.
The 223 series is provided with a mechanical digit counter for
quick reading of measurements.
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
200 - 225mm
225 - 250mm
250 - 275mm
275 - 300mm
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Digital model
Order No.
323-511-30
323-512-30
323-513-30
323-514-30
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
4m
4m
6m
6m
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Digital model
Order No.
323-711-30
323-712-30
323-713-30
323-714-30
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.0002"
.0002"
.0003"
.0003"
Excluding
quantizing error
Metric
Range
0 - 25mm
25 - 50mm
Inch
Range
0 - 1"

Order No.
223-101
223-102
Resolution
0.01mm
0.01mm
Accuracy
4m
4m

Order No.
223-125
Resolution
.001"
Accuracy
.0002"
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
4m
4m
4m
4m
6m
6m
6m
6m
7m
7m
8m
8m
8m
9m
9m
9m
*The measuring disks have carbide tips.

Note: The disk diameter of models over 100mm is 30mm.
Excluding
quantizing error
Inch/Metric
Order No.
123-101
123-113*
123-102
123-114*
123-103
123-115*
123-104
123-116*
123-105
123-106
123-107
123-108
123-109
123-110
123-111
123-112
Inch
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Order No.
123-125
123-126
123-127
123-128
Graduation
.001"
.001"
.001"
.001"
Accuracy
.0002"
.0002"
.0003"
.0003"
Measuring faces
Flatness:

1.6m for models over 100mm
(4+L/50)m [(.00016+.00004 (L/2))"]*
for models up to 100mm (4") over 50mm (2")
(5+L/75)m* for models over 100mm
rounded up
112
Dimensions
TECHNICAL INFORMATION
e
Unit: mm
Center
concavity
L
a
14.5 3
47
17
31.5
L
37.5
62.5
87
112
137.5
162.5
187.5
212.5
237.5
262.5
287.5
312.5
18
a
6
6
5.5
5.5
6
6
6
6
6
6
6
6
b
14
14
11
11
12
15
16
15
14
14
15
15
c
25
32
49
63
79
94
106
118
130
143
156
169
En = Root tangent length

Note: Root tangent length measurement is not
available for some types of gears.
d
20
20
20
20
30
30
30
30
30
30
30
30
e
8 (9.8)
8 (9.8)
8 (9.8)
8 (9.8)
12
12
12
12
12
12
12
12
t
0.7
0.7
0.7
0.7
1
1
1
1
1
1
1
1
Data in ( ) applies to those with carbide tipped disks.
Paper Thickness Micrometers

SERIES 169
169-101
FEATURES
Designed to measure paper thickness.
Non-rotating spindle.
Measuring faces
SPECIFICATIONS
Metric
Range
0 - 25mm
Order No.
169-101
Graduation
0.01mm
Accuracy
4m
Order No.
169-103
Graduation
.001"
Accuracy
.0002"
Flatness:
1m (.00004")
Dimensions
0.4
Unit: mm
Range
0 - 1"
14.3
(.44")
Inch
113
( ): Inch model
MICROMETERS
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
200 - 225mm
225 - 250mm
250 - 275mm
275 - 300mm
6.35
En
Disk Micrometers
MICROMETERS
369-511-30
169-201
FEATURES
Non-rotating spindle eliminates torque on workpiece.

Diameter of measuring disk: 20mm (.79")
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Digital model
Order No.
369-511-30
369-512-30
369-513-30
369-514-30
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
4m
4m
6m
6m
Measuring faces
Flatness:
1m (.00004")
Inch/Metric
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Digital model
Order No.
369-711-30
369-712-30
369-713-30
369-714-30
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.0002"
.0002"
.0003"
.0003"
Dimensions
0.7
20
8
Unit: mm
Accuracy
4m
4m
6m
6m
Order No.
169-203
169-204
169-206
169-208
Graduation
.001"
.001"
.001"
.001"
Accuracy
.0002"
.0002"
.0003"
.0003"
47
15.5 17
18
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
Order No.
169-201
169-202
169-205
169-207
31.5
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
14.5 3
L
a
12
Metric
Inch
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
114
L
37.5
62.5
87
112
a
6
6
5.5
5.5
b
13.5
13.5
13
13
c
25
32
49.5
63.5
d
8
8
8
8

SERIES 125
MICROMETERS
125-103
SPECIFICATIONS
FEATURES
Provided with a 60 degree V-anvil and conical spindle for easily
measuring pitch diameters of metric or unified screw threads.
With a standard for zero point adjustment.
Metric
Range
Order No.
Graduation
0 - 25mm
125-101
125-102
125-103
125-104
125-105
125-106
125-107
125-108
125-109
125-110
125-111
125-112
125-113
125-114
125-115
125-116
125-117
125-118
125-119
125-120
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
(2+L/75)m*
*L=Maximum measuring length (mm), Fraction rounded up
25 - 50mm
Dimensions
14.5 3
L
a
47
17
50 - 75mm
32.3
18
18
Range
Unit: mm L
0 - 25mm
37.5
25 - 50mm 62.5
50 - 75mm 87
75 - 100mm 112
a
5.2
5.2
4.7
4.7
c
25
32
49.5
63.5
d
6.35
6.35
6.35
6.35
75 - 100mm
115
Screw to be measured
(Metric/Unified)
0.4 - 0.5mm/64 - 48TPI
0.6 - 0.9mm/44 - 28TPI
1 - 1.75mm/24 - 14TPI
2 - 3mm/13 - 9TPI
3.5 - 5mm/8 - 5TPI
0.4 - 0.5mm/64 - 48TPI
0.6 - 0.9mm/44 - 28TPI
1 - 1.75mm/24 - 14TPI
2 - 3mm/13 - 9TPI
3.5 - 5mm/8 - 5TPI
0.6 - 0.9mm/44 - 28TPI
1 - 1.75mm/24 - 14TPI
2 - 3mm/13 - 9TPI
3.5 - 5mm/8 - 5TPI
5.5 - 7mm/4.5 - 3.5TPI
0.6 - 0.9mm/44 - 28TPI
1 - 1.75mm/24 - 14TPI
2 - 3mm/13 - 9TPI
3.5 - 5mm/8 - 5TPI
5.5 - 7mm/4.5 - 3.5TPI
Gear Tooth Micrometers

SERIES 324, 124 Interchangeable Ball Anvil-Spindle Tip Type
MICROMETERS
324-251
124-173
FEATURES
Measures over-pin diameter of gears with precision steel
(carbide) ball-tipped measuring faces.
Interchangeable ball anvil-spindle tips for various gear modules
(0.5 - 5.25) are optional.
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Digital model
Order No.
324-251
324-252
324-253
324-254
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
4m
4m
4m
5m
Excluding
quantizing error
Inch/Metric
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Digital model
Order No.
324-351
324-352
324-353
324-354
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.0002"
.0002"
.0002"
.00025"
Excluding
quantizing error
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
200 - 225mm
225 - 250mm
250 - 275mm
275 - 300mm
Order No.
124-173
124-174
124-175
124-176
124-177
124-178
124-179
124-180
124-181
124-182
124-183
124-195
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
4m
4m
4m
5m
5m
5m
6m
6m
6m
7m
7m
7m
Interchangeable Ball Anvil-Spindle Tips (Optional)

Diameter
0.8mm
1mm
1.191mm (3/64")
1.5mm
1.588mm (1/16")
2mm
2.381mm (3/32")
2.5mm
3mm
3.175mm (1/8")
3.5mm
3.969mm (5/32")
4mm
4.5mm
4.763mm (3/16")
5mm
5.556mm (7/32")
6mm
6.35mm (1/4")
7mm
7.144mm (9/32")
7.938mm (5/16")
8mm
8.731mm (11/32")
116
Order No. Gears to be measured

Module
124-801* 0.5 - 0.55
124-802* 0.6 - 0.65
124-803* 0.7 - 0.8
124-821* 0.9 - 1
124-804* 0.9 - 1
124-805 1.25
124-806 1.5
124-822 1.5
124-807 1.75
124-808
124-823 2
124-809 2
124-810 2.25
124-824 2.5
124-811 2.5
124-812 2.75
124-813 3.0 - 3.25
124-814 3.5
124-815 3.75
124-816 4.0
124-817 4.25
124-818 4.5
124-819 4.75
124-820 5.0 - 5.25
Diametral pitch
50
45
35 - 30
28 - 26
28 - 26
22
17
17
15
14
13
13
11
10
10
9
8
7
7
6.5
6
5.5
5.5
5

SERIES 326, 126 Interchangeable Anvil-Spindle Tip Type
326-251
MICROMETERS
126-125
FEATURES
Metric

60 degree or 55 degree V-anvil and conical spindle
(interchangeable) are optional, which are made of high-grade
special steel, hardened and precision ground.
Application
Metric screw,
Unified screw
(60 threads)
Order No.
126-800
Whitworth
screw
(55 threads)
126-810
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
200 - 225mm
225 - 250mm
250 - 275mm
275 - 300mm
Assortment of anvil-spindle tips

0.4 - 0.5mm/64 - 48TPI (126-801)
0.6 - 0.9mm/44 - 28TPI (126-802)
1 - 1.75mm/24 - 14TPI (126-803)
2 - 3mm/13 - 9TPI (126-804)
3.5 - 5mm/8 - 5TPI (126-805)
5.5 - 7mm/4.5 - 3.5TPI (126-806)
60 - 48TPI (126-811)
48 - 40TPI (126-812)
40 - 32TPI (126-813)
32 - 24TPI (126-814)
24 - 18TPI (126-815)
18 - 14TPI (126-816)
14 - 10TPI (126-817)
10 - 7TPI (126-818)
7- 4.5TPI (126-819)
4.5 - 3.5TPI (126-820)
Order No.
126-125
126-126
126-127
126-128
126-129
126-130
126-131
126-132
126-133
126-134
126-135
126-136
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
4m
4m
4m
5m
5m
5m
6m
6m
6m
7m
7m
7m
Inch
Provided with Ratchet Stop for constant force.

Range
Order No.
Graduation
1"
126-137
.001"
1" - 2"
126-138
.001"
2" - 3"
126-139
.001"
3" - 4"
126-140
.001"
(Models with a range up to 12" are available.)
Accuracy
.0002"
.0002"
.0002"
.00025"
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Digital model
Order No.
326-251
326-252
326-253
326-254
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
Standards for Screw Thread Micrometers (Optional)

Accuracy
4m
4m
4m
5m
Excluding
quantizing error
Inch/Metric
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Digital model
Order No.
326-351
326-352
326-353
326-354
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.0002"
.0002"
.0002"
.00025"
Excluding
quantizing error
Metric
Size
25mm
50mm
75mm
100mm
125mm
150mm
175mm
200mm
225mm
250mm
275mm
117
Inch
Order No.
V=60
167-261
167-262
167-263
167-264
167-265
167-266
167-267
167-268
167-269
167-270
167-271
Order No.
V=55
167-272
167-273
167-274
167-275
167-276
167-277
167-278
167-279
167-280
167-281
167-282
Size
1"
2"
3"
4"
5"
6"
7"
8"
9"
10"
11"
Order No.
V=60
167-294
167-295
167-296
167-297
167-298
167-299
167-300
167-301
167-302
167-303
167-304
Order No.
V=55
167-283
167-284
167-285
167-286
167-287
167-288
167-289
167-290
167-291
167-292
167-293
Can Seam Micrometers

SERIES 347, 147
147-202
147-103
347-103
347-104
147-103
MICROMETERS
for cans (for depth measurements up to 5mm)
for aluminium cans
347-105
347-106
147-105
SPECIFICATIONS
Metric
for sprayer cans
Range
0 - 13mm
347-202
347-201
147-202
Digital model
Order No.
347-103
347-105
347-202
Inch/Metric
FEATURES
Measures the width, height, and depth of can seams.
Three types of micrometers are available for :
steel cans, aluminum cans, and sprayer cans.
Range
0 - .5"
Resolution
0.001mm
0.001mm
0.001mm
Remarks
for steel cans
for aluminum cans
for sprayer cans
Digital model
Order No.
347-104
347-106
347-201
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Remarks
for steel cans
for aluminum cans
for sprayer cans
Order No.
147-103
147-105
147-202
Graduation
0.01mm
0.01mm
0.01mm
Remarks
for steel cans
for aluminum cans
for sprayer cans
Order No.
147-104
147-106
147-201
Graduation
.001"
.001"
.001"
Remarks
for steel cans
for aluminum cans
for sprayer cans
Metric
Dimensions
16
15
16
52.5
Range
0 - .5"
38.5
15
16
347-105
347-106
147-105
Accuracy
3m (.00015")
Excluding quantizing error. (347 series)
20
22.5
15
40
9.25
11.25
Inch
20
9.3
10.15 1.3
45
1.5
347-103
347-104
147-103
15
20
0.5
Range
0 - 13mm
20
9.25
53
1.5
Unit: mm
15
15
11.25
40
10.65
11.25
22
347-202
347-201
147-202
118
Hub Micrometers
SERIES 147
147-301
FEATURES
Order No.
147-301
147-302
147-303
147-304
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
2m
2m
2m
3m
Dimensions
Inch
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Unit: mm
h3
Order No.
of micrometer
147-301
147-302
147-303
147-304
h2
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Order No.
147-351
147-352
147-353
147-354
Graduation
.001"
.001"
.001"
.001"
Accuracy
.0001"
.0001"
.0001"
.00015"
h1
6
6.5
6.5
6.5
h2
8.5
11
11
11
Wire Micrometers
SERIES 147
147-401
FEATURES
Designed for measuring wire thickness.
Also used to measure the diameter of a small ball.
Carbide-tipped measuring faces
Measuring faces
SPECIFICATIONS
Dimensions
Flatness:
0.6m (.000024")
Parallelism: 1.3m (.00006")
Graduation
0.01mm
Accuracy
3m
Order No.
147-402
Graduation
.0001"
Accuracy
.00015"
15
2.5
12.5
14.5
15
Inch
Range
0 - .4"
14.5
16
Order No.
147-401
Unit: mm
101
6.35
Metric
Range
0 - 10mm
MICROMETERS
Metric
Flatness:
0.6m (.000024")
Parallelism: (2+L/100)m [(.00008+.00004 (L/4))"]*
rounded up
h1
SPECIFICATIONS
Measuring faces
Measures hub thickness and shoulders inside a bore.

147-401
119
h3
13.5
14
13
13
H
17.5
20.5
20.5
20.5
Digit Outside Micrometers

SERIES 193
FEATURES
Inch
Mechanical digit counter for quick and error-free reading.

Direct readout on the counter to 0.01mm (.001").
Carbide-tipped measuring faces for long life.
SPECIFICATIONS
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Order No.
193-201
193-211
193-202
193-212
1" - 2"
Graduation
.001"
.0001"
.001"
.0001"
Accuracy
.0001"
.0001"
.0001"
.0001"
With ratchet stop

Order No.
193-101
193-111
193-102
193-112
193-103
193-113
193-104
193-114
193-305
193-306
193-307
193-308
193-309
193-310
Graduation
0.01mm
0.001mm
0.01mm
0.001mm
0.01mm
0.001mm
0.01mm
0.001mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Accuracy
2m
2m
2m
2m
2m
2m
3m
3m
3m
3m
4m
4m
4m
5m
Measuring faces
Flatness:
0.6m (.000024") for models up to 300mm

(12")
Parallelism: (2+L/100)m [(.00008+.00004 (L/4))"]*
*L=Maximum measuring length (mm) [(inch)], Fraction rounded
down.
Dimensions
Unit: mm
L
a
27.5
25.5
(65)
17
47
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
200 - 225mm
225 - 250mm
Range
0 - 1"
18
(21)
Metric
MICROMETERS
193-101
Inch
Range
2" - 3"
3" - 4"
4" - 5"
5" - 6"
6" - 7"
7" - 8"
8" - 9"
9" - 10"
10" - 11"
( ): for models of
range over 100mm
With ratchet stop

Order No.
193-213
193-214
193-415
193-416
193-417
193-418
193-419
193-420
193-421
Graduation
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
Accuracy
.0001"
.00015"
.00015"
.00015"
.0002"
.0002"
.0002"
.00025"
.00025"
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
200 - 225mm
225 - 250mm
250 - 275mm
275 - 300mm
L
30
55
80
105
137
162
187
212
238
263
289
314
a
2.5
2.5
2.5
2.5
6
6
6
6
7
7
8
8
b
5
8
9
9
18
18
18
19
20
19
19
20
c
26
32
45
57
80
93
106
119
132
145
158
171
d
6.35
6.35
6.35
6.35
8
8
8
8
8
8
8
8
Note: The shape of the thimble changes on the model with

Friction Thimble.
120
Metric
Inch
Range
0 - 3"
(3 mikes/set)
0 - 6"
(6 mikes/set)
Micrometer set
Order No.
193-901
193-902
193-908
193-101, 193-102, 193-103
193-101, 193-102, 193-103, 193-104
193-101, 193-102, 193-103, 193-104,
193-305, 193-306
Micrometer set
Order No.
193-923
193-930
193-211, 193-212, 193-213
193-211, 193-212, 193-213, 193-214,
193-415, 193-416
193-902
Caliper Type Micrometers

SERIES 343, 143
343-511-30
FEATURES
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Digital model
Order No.
343-511-30
343-512-30
343-513-30
343-514-30
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
Accuracy
5m
6m
7m
8m
Excluding
quantizing error
Inch/Metric
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Digital model
Order No.
343-711-30
343-712-30
343-713-30
343-714-30
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.00025"
.0003"
.00035"
.0004"
Excluding
quantizing error
Metric
Range
Order No.
Graduation
0 - 25mm
143-101
0.01mm
25 - 50mm
143-102
0.01mm
50 - 75mm
143-103
0.01mm
75 - 100mm
143-104
0.01mm
100 - 125mm 143-105
0.01mm
Models with a range up to 300mm are available.
Accuracy
5m
6m
7m
8m
9m
Inch
Range
Order No.
Graduation
0 - 1"
143-121
.001"
1" - 2"
143-122
.001"
Models with a range up to 4" are available.
Accuracy
.00025"
.0003"
Measuring faces
Flatness:
0.3m (.000012")
Parallelism: (3+L/75)m [(.00012+.00004 (L/3))"]*
rounded down
121
MICROMETERS
Range
0 - 75mm
(3 mikes/set)
0 - 100mm
(4 mikes/set)
0 - 150mm
(6 mikes/set)
SERIES 227 with Constant & Adjustable Fine-loading Device
227-203
MICROMETERS
227-201
227-221
Plastic pipe
Rubber sheet
FEATURES
Constant and low measuring force mechanism in the thimble.
Adjustable measuring force* accommodates various kind of
work materials. *0.5-2.5N or 2-10N
SPECIFICATION
The measurement-value hold function automatically retains the
data at a specified measuring force, ensuring accuracy.
Large LCD digits of 7.5mm height for error-free reading.
Non-rotating spindle and the new ratchet friction thimble.
Speedy spindle feed of 10 mm/.4.
With absolute linear scale.
The IP54 level water resistance protection (when not connected
with data output cable).
With SPC data output.
With a standard bar to set the origin point (for models with 15 30mm range).
Metric
Range
0 - 15mm
Order No.
227-201
227-202
15 - 30mm 227-203
227-204
Accuracy
2m
2m
2m
2m
Measuring force
0.5N - 2.5N
2N - 10N
0.5N - 2.5N
2N - 10N
Inch/Metric
Range
0 - .6"
.6" - 1.2"
Dimensions
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
Unit: mm
Order No.
227-211
227-212
227-213
227-214
Resolution
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
.00005"/0.001mm
Accuracy
.0001"
.0001"
.0001"
.0001"
Measuring force
0.5N - 2.5N
2N - 10N
0.5N - 2.5N
2N - 10N
26
Range
0 - 15mm
190.2
9
32
69.6
53.4
Metric
17.7
227-201
Order No. Resolution

227-221 0.001mm
227-222 0.001mm
Accuracy
4m
4m
Measuring force
0.5N - 2.5N
2N - 10N
24.5
6.35
25
0-15
Disk type
Inch/Metric
Range
0 - .6"
Disk type
Order No. Resolution

227-231 .00005"/0.001mm
227-232 .00005"/0.001mm
Accuracy
.0002"
.0002"
Measuring force
0.5N - 2.5N
2N - 10N
122
Low Force Micrometers

SERIES 227
SPECIFICATION
Metric
Range
0 - 25mm
25 - 50mm
Order No.
227-101
227-102
Graduation
0.01mm
0.01mm
Accuracy
2m
2m
Mass
262g
290g
Order No.
227-111
Graduation
.0001"
Accuracy
.0001"
Mass
.58 lbs.
Inch
227-101
Range
0 - 1"
Measuring faces: Carbide-tipped

Flatness of measuring faces: 0.6m
Parallelism between measuring faces: 3m
Measuring force: 1N
FEATURES
Low Force Micrometers are specially designed for elastic
workpieces such as plastic parts.
Constant measuring force of 1N is ensured by the springloaded anvil.
The spindle does not rotate.
With a friction thimble.
Provided with a standard to set the origin point for 25-50mm
model.
Dimensions
L
20
Unit: mm
52
27.5
6.35
30
57
25
3.5
5
0
45
Range
0 - 25mm
25 - 50mm
L
31
56
Digimatic Bench Micrometer

SERIES 121 Interchangeable Anvil Type
SPECIFICATION
Metric
Range
0 - 50mm
Order No.
121-145
Resolution
0.001mm
Accuracy
2m
Mass
2.3kg
Inch/Metric
121-145
Range
0 - 2"
Order No.
121-155
Resolution
.00005"/ 0.001mm
Accuracy
.0001"
Mass
5.07 lbs.
Technical Data
Display:
Functions:
FEATURES
The LCD panel rotates within 330 degrees
for use in horizontal or vertical position.
Interchangeable anvils allow a wide
measuring range of 50mm (2").
Provided with a ratchet stop for constant force.
Provided with a standard to set the origin for 25-50mm
measurement.
LCD
Zero-Set, presetting, power on/off, counting direction
switching, inch/mm conversion (inch/mm type only), SPC data
output
Micrometer head stroke: 25mm (1")
Measuring faces: Carbide-tipped
Measuring force: 6N - 10N
Battery:
SR44 (2 pcs.) (938882 X 2 pcs.)
Battery life:
Approx. 1.8 years under normal use
Alarm:
Low battery voltage, over-speed error, over-flow error
Operating temperature: 5C to 40C
Order No.
937387
965013
123
Description
SPC cable (1m)
SPC cable (2m)
MICROMETERS
Technical Data
Snap Meters
SERIES 523
Unit: mm
Dimensions
11.5
88.8
Measuring Range
10.8
89.5
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Indicator is optional.
D
25
35
47.5
60
L
31
56
81
106
Accuracy (dispersion of indication

MICROMETERS
0.4m (.00002")
Measuring faces
Flatness: 0.3m (.000015")

Parallelism:
523-141
FEATURES
Various types of indicator can be
selected according to the measruement
applications.
Spindle diameter: 10.8mm (.425")
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Inch
Order No.
523-141
523-142
523-143
523-144
Anvil movement
2mm
2mm
2mm
2mm
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Order No.
523-115
523-152
523-153
523-154
Anvil movement
.078"
.078"
.078"
.078"
Dial Snap Meters

SERIES 523
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
Order No.
523-121
523-122
523-123
523-124
Graduation of indicator
0.001mm
0.001mm
0.001mm
0.001mm
Indicating range
0.060mm
0.060mm
0.060mm
0.060mm
Order No.
523-131
523-132
523-133
523-134
.00005"
.00005"
.00005"
.00005"
Indicating range
.0023"
.0023"
.0023"
.0023"
Inch
523-101
FEATURES
Direct GO/NO-GO judgment
for mass-produced parts.
Spindle diameter: 10.8mm (.425")
IP protection level: 54
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Accuracy
1m (.00005") for 0.060mm (.0023") indicating range

Measuring faces
Flatness: 0.3m (.000015")

Parallelism:
124
Indicating Micrometers
SERIES 510
SPECIFICATIONS
Metric
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
510-121
Order No.
510-121*
510-122
510-123
510-124
0.001mm
0.001mm
0.001mm
0.001mm
Indicating range
0.060mm
0.060mm
0.060mm
0.060mm
*510-151: Retractable anvil button on the leftside.
Inch
Range
0 - 1"
1" - 2"
2" - 3"
3" - 4"
Order No.
510-131*
510-132
510-133
510-134
.00005"
.00005"
.00005"
.00005"
Indicating range
.0023"
.0023"
.0023"
.0023"
MICROMETERS
Retractable anvil with indicator for three-wire measurements of

pitch diameter of precision screws, roundness and parallelism
measurements.
Spindle diameter: 8mm (.315")
IP protection level: 54
*510-141: Retractable anvil button on the leftside.
55.5
11.5
50
19 3
Dimensions
Accuracy
3.5
21
FEATURES
Micrometer: 3m (.00015")
Indicator: 1m (.00005")
Unit: mm
Retractable anvil
button
Workpiece stopper
(optional)
14
23
16
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
14
15
Flatness: 0.3m (.000015")

Parallelism:
20.5
Measuring faces
04AZA124 04AZA125 04AZA126
L
31.5
56.5
81.5
106.5
d
25
38
50
63
Outside Micrometers
SERIES 107
SPECIFICATIONS
Metric
107-201
FEATURES
With dial indicator for direct GO/NG-GO judgment for massproduced parts.
Anvil retracting trigger for quick measurement.
Anvil retracting range: 4mm
Provided with a standard except for 25mm model.
Order No.
107-201
107-202
193-203
107-204
172-205
172-206
172-207
172-208
Accuracy
2m
2m
2m
3m
3m
3m
4m
4m
Measuring faces
Flatness:
0.6m
Parallelism: (2+L/100)m
*L=Maximum measuring length (mm), Fraction
rounded down.
Dimensions
18
Dial indicator
125
6.35
Dial indicator
(optional)
Range
0 - 25mm
25 - 50mm
50 - 75mm
75 - 100mm
100 - 125mm
125 - 150mm
150 - 175mm
175 - 200mm
Unit: mm
14.5
Limit Micrometers
SERIES 113
MICROMETERS
113-102
FEATURES
SPECIFICATIONS
Can be used as a GO/NG gage by setting the upper

and lower limits.
Provided with a standard for 25mm - 50mm model.
Metric
Range
0 - 25mm
25 - 50mm
Order No.
113-102
113-103
Graduation
0.01mm
0.01mm
Accuracy
3m
3m
Measuring faces
Flatness:
0.6m
Parallelism: (3+L/100)m*
* L=Maximum measuring length (mm) Fraction rounded down
126
Optical Flats
SERIES 158
Flatness Check of Measuring Faces Using Interfer ence
Fringe Pattern Produced by an Optical Flat
Viewing direction
158-118
Used for inspecting the flatness of micrometer's or gauge

block's measuring faces with high accuracy.
Optical flat
Optical flat
Anvil
Anvil
SPECIFICATIONS
Metric
Flatness
0.2m
0.1m
Inch
Order No.
158-117
158-119
158-118
158-120
Diameter
45mm
60mm
45mm
60mm
Thickness
12mm
15mm
12mm
15mm
Flatness
.000004"
Order No.
158-122
158-124
Diameter
1.8"
2.4"
Thickness
.5"
.6"
Optical Parallels
SERIES 157
Parallelism Check between Measuring Faces by Means of
Interference Fringe Produced by an Optical Parallel
The parallelism between the measuring faces can be determined as
follows; wring the optical parallel to the anvil and observe the
number of interference fringes produced on the spindle side under
the measuring force of the micrometers.
The parallelism is about 1m (0.32m x 3 = 0.96m).
Fringe on the anvil side must not be more than one.
157-903
FEATURES
Viewing direction
of the anvil
Viewing direction
of the spindle
Designed to inspect parallelism and flatness of measuring faces

of micrometers.
Each set consists of 4 thicknesses.
Flatness: 0.1m (.000004")
Parallelism: 0.2m (.000008")
Diameter of optical parallel: 30mm (1.19")
Supplied with fitted carrying case.
Optical parallel
Spindle
Anvil
SPECIFICATIONS
Metric
Range of micrometer
to be checked
0-25mm
25-50mm
Inch
Order No.
157-903
157-904
Assortment of parallels
(Thickness of parallel)
12.00, 12.12, 12.25, 12.37mm
25.00, 25.12, 25.25, 25.37mm
Range of micrometer
to be checked
0-1"
1-2"
127
Order No.
157-901
157-902
Assortment of parallels
(Thickness of parallel)
.5000", .5062", .5125", .5187"
1.0000", 1.0062", 1.0125", 1.0187"
MICROMETERS
FEATURES
Micrometer Standards
SERIES 167
FEATURES
Used for the zero point setting of outside micrometers.
Flat and lapped measuring faces.
Heat insulating handle for
preventing expansion due to
body temperature.
167-108
167-103
Technical Data
Flatness of measuring faces: 0.3m (.000012")
Parallelism between measuring faces: 2m (.00008")
SPECIFICATIONS
Length
25mm
50mm
75mm
100mm
125mm
150mm
175mm
200mm
225mm
250mm
275mm
300mm
325mm
350mm
375mm
400mm
425mm
450mm
475mm
500mm
Inch
Order No.
167-101
167-102
167-103
167-104
167-105
167-106
167-107
167-108
167-109
167-110
167-111
167-112
167-113
167-114
167-115
167-116
167-117
167-118
167-119
167-120
Diameter
6.35mm
6.35mm
6.35mm
7.9mm
7.9mm
7.9mm
7.9mm
9.4mm
9.4mm
9.4mm
9.4mm
9.4mm
9.4mm
9.4mm
9.4mm
9.4mm
9.4mm
9.4mm
9.4mm
11.9mm
Length
525mm
550mm
575mm
600mm
625mm
650mm
675mm
700mm
725mm
750mm
775mm
800mm
825mm
850mm
875mm
900mm
925mm
950mm
975mm
1000mm
Order No.
167-121
167-122
167-123
167-124
167-125
167-126
167-127
167-128
167-129
167-130
167-131
167-132
167-133
167-134
167-135
167-136
167-137
167-138
167-139
167-140
Length
1"
2"
3"
4"
5"
6"
7"
8"
9"
10"
11"
12"
13"
14"
15"
16"
17"
18"
19"
20"
Diameter
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
11.9mm
Order No.
167-141
167-142
167-143
167-144
167-145
167-146
167-147
167-148
167-149
167-150
167-151
167-152
167-153
167-154
167-155
167-156
167-157
167-158
167-159
167-160
Diameter
.25"
.25"
.25"
.31"
.31"
.31"
.31"
.37"
.37"
.37"
.37"
.37"
.37"
.37"
.37"
.37"
.37"
.37"
.37"
.47"
Length
21"
22"
23"
24"
25"
26"
27"
28"
29"
30"
31"
32"
33"
34"
35"
36"
37"
38"
39"
40"
Order No.
167-161
167-162
167-163
167-164
167-165
167-166
167-167
167-168
167-169
167-170
167-171
167-172
167-173
167-174
167-175
167-176
167-177
167-178
167-179
167-180
Diameter
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
.47"
Order No.
167-294
167-283
167-295
167-284
167-296
167-285
167-297
167-286
Thread angle
60
55
60
55
60
55
60
55
Order No.
167-337
167-338
167-339
167-340
167-341
167-342
167-343
Type
Plug
Plug
Plug
Ring
Ring
Ring
Ring
Standards for Screw Thread Micrometers

SERIES 167 60 degree and 55 degree
SPECIFICATIONS
Metric
167-264
Length
25mm
167-262
FEATURES
Dimensions
Specially designed for the

zero point setting of screw
thread micrometers.
6.35
MICROMETERS
Metric
60or 55
50mm
Unit: mm
75mm
60or 55
Length
100mm
Inch
Order No.
167-261
167-272
167-262
167-273
167-263
167-274
167-264
167-275
Thread angle
60
55
60
55
60
55
60
55
Length
1"
Type
Plug
Plug
Plug
Plug
Plug
Plug
Plug
Length
.2"
.4"
1"
1.6"
2.2"
2.8"
3.4"
2"
3"
4"
Standards for V-Anvil Micrometers

SERIES 167
SPECIFICATIONS
Metric
167-329
FEATURES
Specially designed for the zero point setting of V-anvil
micrometers.
Length
5mm
10mm
25mm
40mm
55mm
70mm
85mm
128
Inch
Order No.
167-327
167-328
167-329
167-330
167-331
167-332
167-333
3-Wire Units
MICROMETERS
SERIES 313
313-101
FEATURES
SPECIFICATIONS
Facilitates measurement of the pitch diameter of screw threads

with a standard micrometer.
18 sizes of wires are assorted in a set.
Roundness of wire: within 0.5m
Cylindricity of wire: within 1m
Hardness of wire: 59 - 63HRC
Application
6.35mm
(.25" DIA.)
Order No.
313-101
8mm
(.315" DIA.)
313-102
3-wire method
Formula to obtain the pitch diameter (E)*:
E=M - 3d + 0.866025P
where
P=Screw thread pitch

d=Diameter of wire
E=Pitch diameter
M=Measured length
P
d d
M
d
*For metric or UNF screw
129
Assortment of wire units

0.17mm (952131), 0.195mm (952132),
0.22mm (952133), 0.25mm (952134),
0.29mm (952135), 0.335mm (952136),
0.39mm (952137), 0.455mm (952138),
0.53mm (952139), 0.62mm (952140),
0.725mm (952141), 0.895mm (952142),
1.1mm (952143), 1.35mm (952144),
1.65mm (952145), 2.05mm (952146),
2.55mm (952147), 3.2mm (952148)
0.17mm (952149), 0.195mm (952150),
0.22mm (952151), 0.25mm (952152),
0.29mm (952153), 0.335mm (952154),
0.39mm (952155), 0.455mm (952156),
0.53mm (952157), 0.62mm (952158),
0.725mm (952159), 0.895mm (952160),
1.1mm (952161), 1.35mm (952162),
1.65mm (952163), 2.05mm (952164),
2.55mm (952165), 3.2mm (952166)
Micrometer Stands
SERIES 156
MICROMETERS
156-105
156-102
156-101
These stands are designed to allow bench-top use with hand

micrometers or other gages which have frame area sufficient to
grab onto.
SPECIFICATIONS
Remarks
Fixed angle type
Adjustable angle type
Vertical type
Vertical type
24.8
435
Order No.
156-105
156-101
156-102
156-103
40
Micrometer ranges
0-25mm (0-1"), 25-50mm (1"-2")
Up to 100mm (4")
Up to 300mm (12")
Over 300mm (12")
Dimensions
30
About
30
156-102
102.15
28
74
97
55.8
910
156-105
120
220
40
31.5
139.5
156-101
156-103
130
About
30
35
2.5
0 to 18
30
to
Max. 63
12
Unit: mm
Groove Micrometers
SERIES 146
146-121
146-122
146-221
MICROMETERS
146-222
FEATURES
Flanged spindle for measuring width, depth, and location of
grooves inside/outside bores, and tubes.
Provided with two types of graduations for inside and outside
measurements.
Non-rotating spindle type has two-directional ratchet stop
(Measuring force: 5-10N).
SPECIFICATIONS
Metric
Rotating spindle type
Range
Outside
0 - 25mm
Range
Inside
1.6 - 26.5mm
25 - 50mm
50 - 75mm
75 - 100mm
26.5 - 51.5mm
51.5 - 76.5mm
76.5 - 101.5mm
Inch
Order No.
Graduation
146-121
146-122
146-123
146-124
146-125
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Range
Outside
0 - 25mm
Range
Inside
1.6 - 26.5mm
25 - 50mm
50 - 75mm
75 - 100mm
26.5 - 51.5mm
51.5 - 76.5mm
76.5 - 101.5mm
Inch
Rotating spindle type
Range
Outside
0 - 1"
Range
Inside
.055" - 1.05"
1" - 2"
2" - 3"
3" - 4"
1.05" - 2.05"
2.05" - 3.05"
3.05" - 4.05"
Non-rotating spindle type
Metric
Flange
diameter
6.35mm
12.7mm
12.7mm
12.7mm
12.7mm
Order No.
Graduation
146-131
146-132
146-133
146-134
146-135
.001"
.001"
.001"
.001"
.001"
Flange
diameter
.25"
.5"
.5"
.5"
.5"
Order No.
Graduation
146-221
146-222
146-223
146-224
146-225
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Flange
diameter
6.35mm
12.7mm
12.7mm
12.7mm
12.7mm
Non-rotating spindle type
Range
Outside
0 - 1"
Range
Inside
.055" - 1.05"
1" - 2"
2" - 3"
3" - 4"
1.05" - 2.05"
2.05" - 3.05"
3.05" - 4.05"
Order No.
Graduation
146-231
146-232
146-233
146-234
146-235
.001"
.001"
.001"
.001"
.001"
Flange
diameter
.25"
.5"
.5"
.5"
.5"
Accuracy
Accuracy: 10m (.0004")

Dimensions
(230)
15
32
47
Unit: mm
17
18
(104.5)
10
18
146-122
(254.5)
131
(115)
32
146-222
61
17
18.3
146-221
25 0.75
15
0.75
10
17
12.7
61
12.7
6.35
15
146-121
(194)
32
25 0.75
0.75
6.35
17
12.7
47
12.7
18.3
10
19.5
(170)
32
15
9.5
10
5
5
6.35
25 0.75 (35)
3.5
0.75
6.35
25 0.75 (35)
3.5
6.35
6.35
0.75
Depth Micrometers
SERIES 329, 229, 129 Interchangeable Rod Type
MICROMETERS
329-511-30
229-101
129-110
FEATURES
SPECIFICATIONS
4mm (.157" DIA.) interchangeable rods, with lapped

measuring end, provide a wide measuring range.
The rod length can be adjusted in 25mm (1") increments.
With Ratchet Stop for consistent force.
Crisp clear graduations on the thimble.
The 329 series (LCD readout type) are provided with SPC
output.
The 229 series are provided with a mechanical digit counter for
quick and error-free reading.
Complete with fitted carrying case.
Accuracy
Accuracy of micrometer head: 3m (.00015")

Excluding quantizing error. (329 series)
Flatness of reference face:
1.3m (.00005") for base with 63.5mm (2.5") width
2m (.00008") for base with 101.6mm (4") width
Flatness of measuring face of rod: 0.3m (.000012")
Parallelism between reference face and measuring face:
(4+L/50)m [(.00016+.00004 (L/2))"]*
rounded up
Accuracy of interchangeable rod:
(2+L/75)m [(.0001+.00005 (L/3))"]*
rounded up
Dimensions
Unit: mm
18 3
65.4
17
101.6
18.3
50
Order No.
937387
965013
Description
SPC cable (1m)
SPC cable (2m)
129-113
132
Metric
Digital model
Range
Order No.
Resolution
0 - 150mm
0 - 300mm
329-511-30 0.001mm
329-512-30 0.001mm
Remarks
with 6 rods
with 12 rods
Digital model
Range
Order No.
Resolution
0 - 6"
329-711-30 .00005"/
0.001mm
329-712-30 .0001"/
0.001mm
Dimensions of
reference face
4"X.63"
Remarks
with 6 rods
4"X.63"
with 12 rods
Range
Order No.
Graduation
0 - 50mm
129-109
129-113
129-110
129-114
129-111
129-115
129-112
129-116
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Range
Order No.
Graduation
0 - 3"
129-126
129-130
129-127
129-131
129-128
129-132
129-149
129-150
.001"
.001"
.001"
.001"
.001"
.001"
.001"
.001"
0 - 75mm
0 - 100mm
Metric
Range
Order No.
Graduation
0 - 25mm
229-101
229-102
229-109
229-113
0.01mm
0.01mm
0.01mm
0.01mm
0 - 50mm
Inch
Remarks
with 1 rod
with 1 rod
with 2 rods
with 2 rods
0 - 150mm
Order No.
Graduation
0 - 4"
229-127
229-131
229-128
229-132
.001"
.001"
.001"
.001"
Dimensions of
reference face
2.5"X.63"
4"X.63"
2.5"X.63"
4"X.63"
Remarks
Dimensions of
reference face
2.5"X.63"
4"X.63"
2.5"X.63"
4"X.63"
2.5"X.63"
4"X.63"
2.5"X.63"
4"X.63"
Remarks
with 2 rods
with 2 rods
with 3 rods
with 3 rods
with 4 rods
with 4 rods
with 6 rods
with 6 rods
Inch
Range
0 - 6"
Dimensions of
reference face
63.5X16mm
101.6X16mm
63.5X16mm
101.6X16mm
Dimensions of
reference face
63.5X16mm
101.6X16mm
63.5X16mm
101.6X16mm
63.5X16mm
101.6X16mm
63.5X16mm
101.6X16mm
Remarks
0 - 4"
with 4 rods
with 4 rods
with 6 rods
with 6 rods
0 - 6"
0 - 12"
with 3 rods
with 3 rods
with 4 rods
with 4 rods
with 6 rods
with 6 rods
with 12 rods
with 12 rods
Depth Micrometers
SERIES 128
SPECIFICATIONS
128-101
Metric
Range
0 - 25mm
128-102
Order No.
128-101
128-103*
128-102
128-104*
Graduation
0.01mm
0.01mm
0.01mm
0.01mm
Dimensions of reference
63.5 x 16mm
63.5 x 16mm
101.6 x 16mm
101.6 x 16mm
Graduation
.001"
.001"
Dimensions of reference
2.5" x .63"
4" x .63"
*The measuring face has a carbide tip.
Inch
Range
0 - 1"
Order No.
128-105
128-106
FEATURES
*The measuring face has a carbide tip.
Ratchet Stop for consistent and repetitive measurements.

4mm (.157" DIA.) measuring face.
Satin-chrome finished throughout.
With spindle locking clamp.
Crisp clear graduations on the thimble.
Accuracy
Accuracy of micrometer head: 3m (.00015")

Flatness of reference face:
1.3m (.00005") for base with 63.5mm (2.5") width
2m (.00008") for base with 101.6mm (4") width
133
MICROMETERS
Metric
Inch/Metric
0 - 12"
Dimensions of
reference face
101.6X16mm
101.6X16mm

Micrometer List of Products Move To Other Products

Uploaded by

Copyright:

Available Formats

Micrometer List of Products Move To Other Products

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Micrometer List of Products Move To Other Products

Uploaded by

Copyright:

Available Formats

Mitutoyo General Catalog

Quick-Setting Outside Micrometers

Crimp Height Micrometers

Sheet Metal Micrometers

Paper Thickness Micrometers

Screw Thread Micrometers

Gear Tooth Micrometers

Screw Thread Micrometers

Can Seam Micrometers

Digit Outside Micrometers

Caliper Type Micrometers

Low Force Micrometers

Digimatic Bench Micrometer

Dial Snap Meters

Standards for Screw Thread Micrometers

Standards for V-Anvil Micrometers

28 Laser scan micrometer

With ratchet stop

*without SPC data output

With friction thimble

*without SPC data output

With ratchet thimble

With friction thimble

With ratchet thimble

With ratchet stop

The Quickmake provides a speedy spindle feed of 10mm per

Large LCD digits of 7.5mm height for error-free reading.

*Without SPC data output

Excluding quantizing error

Excluding quantizing error

Excluding quantizing error

Excluding quantizing error

Excluding quantizing error

Excluding quantizing error

Crimp height type

Excluding quantizing error

Series 342: Crimp height type

The world's lightest digital micrometer 215g in mass.

With ratchet stop

Excluding quantizing error

With ratchet stop

Excluding quantizing error

With friction thimble

Excluding quantizing error

Carbide-tipped measuring faces.

With ratchet stop

Note: .0001" reading is obtained with vernier.

With friction thimble

Note: The shape of the thimble changes on the model

Note: .0001" reading is obtained with vernier.

With ratchet stop

With ratchet stop

Note: 0.001mm (.0001") reading is obtained with vernier.

With ratchet thimble

With ratchet thimble

Note: The shape of the thimble changes on the model with

Note: 0.001mm (.0001") reading is obtained with vernier.

Quick-Setting Outside Micrometers

1mm spindle thread pitch for quick setting.