Fujitsu P42HHA10 Service Manual
Fujitsu P42HHA10 Service Manual
Fujitsu P42HHA10 Service Manual
FUJITSU
GENERAL
Proprietary
Copy Prohibited
CONTENTS
IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SETTING SIGNALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 VIDEO MODE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 RGB MODE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 TROUBLESHOOTING USING LED AND OSD . . . . . . . . . . . . . . . . . . . 47 TROUBLESHOOTING FLOWCHART . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 VOLTAGE OF EACH CONNECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 VS AND Vd ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 GENERAL CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . 66 DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 TRANSPORTATION AND HANDLING RESTRICTIONS . . . . . . . . . . . 103
IMPORTANT INFORMATION
WARNING :
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Please use a screen saver to prevent burning of an after-image on the screen. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this unit, observe the following basic rules governing its installation, use and service. Please read these "Important Safeguards" carefully before use. Read all the safety and operating instructions before operating the unit. Retain the safety and operating instructions for future reference. Adhere to all warnings on the unit and in the operating instructions. Follow all operating instructions. Unplug the unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments not recommended by the manufacturer as they may be hazardous. Do not use the unit near water. Do not use the unit immediately after moving it from a low temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Do not place the unit on an unstable cart, stand, or table. The unit may fall, causing serious injury to a child or adult, and serious damage to the unit. Mount the unit according to the manufacturer's instructions, using the mount recommended by the manufacturer. When the unit is used on a cart, avoid quick stops, excessive force, and uneven surfaces which may cause the unit and cart to overturn, damaging the unit or causing possible injury to the operator. When transporting by car, place the unit as shown in the figure. Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation and protect the unit from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the unit on a bed, sofa, rug, or similar surface. The unit should not be placed in a built - in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer's instructions are adhered to.) For proper ventilation, separate the unit from other equipment, which may obstruct ventilation. Keep the unit at least 10cm from other equipment. Operate only with the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. This unit is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you cannot insert the plug into the outlet, have an electrician install the proper outlet. Do not defeat the safety purpose of the grounded plug. Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at doors, plugs, receptacles, and where they exit from the unit. For added protection during a lightning storm, or when the unit is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cabling. This will prevent damage to the unit by lighting and power line surges. Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in fire or electric shock. Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind onto the unit.
-2-
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltages and other hazards. Have all service done by qualified service personnel. Unplug this unit from the wall outlet and have it serviced by qualified service personnel in the following cases: a) If the power supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen onto the unit. c) If the unit has been exposed to rain or water. d) If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the Operation Manual, as improper adjustment of controls may result in damage and will often require extensive work by a qualified technician to restore the unit to normal operation. e) If the unit has been dropped or damaged in any way. f) A distinct change in performance indicates that service is required. When required, be sure the service technician uses replacement parts specified by the manufacturer or parts with the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. Upon completion of any service of repairs, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. Place the unit more than one foot away from heat sources such as radiators, heat registers, stoves, and other devices (including amplifiers) that produce heat. When connecting other devices such as VCR's and personal computers, turn off the power to this unit to protect against electric shock. Do not place combustibles such as cloth, paper, matches, aerosol cans or gas lighters that prevent special hazards when overheated behind the cooling fan. Use only the accessory cord designed for this unit to prevent shock. The power supply voltage rating of this unit is AC100-240V, but the attached power cord conforms to the following power supply voltage. Use only the Power Cord designated by our dealer to ensure Safety and EMC. When used with other power supply voltages, the power cable must be changed. Consult your local dealer.
Power Cord
AC 100 - 125 V
AC 200 - 240 V
-3-
Power requirement PDP UNIT SELECTOR UNIT Current drain PDP UNIT SELECTOR UNIT Display panel Screen size Aspect ratio Number of pixels Pixel pitch Contrast ratio Luminance Viewing angle Input/Output Terminals of PDP unit DVI input
110-240V, 50/60Hz 110-240V, 50/60Hz 4.3A-1.8A 0.4A UB type 92.2(W) X 52.2(H) [cm] 36.3(W) X 20.6(H) [inch] 16 : 9 1,024(H) X 1024(V) pixels 0.90mm X 0.51mm 1000 : 1 1000 cd/m2 Max. 160 degrees
mD-sub : 15pin(3 row type) Video : 0.7VP-P /75 SYNC signal : TTL level 8 memories (each RGB1,2,3) Horizontal : 15.63 to 80.0MHz Vertical : 50.0 to 120Hz Dot clock : 50MHz Max. XGA 68MHz
Digital RGB1 output DVI-D terminal (HDCP) Differential Input 0.5 + 10% (RXC + , RX0 + , RX1 + , RX2 + ) Analog audio input Two RCA terminals (one system) 500mVrms/22K
DVI-D terminal (HDCP) Differential Input 0.5 + 10% (RXC + , RX0 + , RX1 + , RX2 + ) Horizontal : 33.75MHz Vertical : 60Hz Dot clock : 40.5MHz Optical Input -27dB to -14.5dB Level terminal 10W+10W (L/R), 6
Digital(optical) audio Optical Input input -24dB to -14.5dB Digital(optical) audio Optical Input output for Display -21dB to -15dB for audio amp -21dB to -15dB Color system NTSC/PAL/SECAM/N-PAL/M-PAL /4.43NTSC/PAL60 16.7 million (256 each for R.G.B.) Width : 103.7cm (40.8 inch) Height : 64.2cm (25.3 inch) Depth : 8.5cm (3.3 inch) Width : 43.0cm (16.9 inch) Height : 9.5cm (3.7 inch) Depth : 37.0cm (14.6 inch) 28.5kg 4.5kg
Display frequency
Digital(optical) audio input Effective max. output Input/Output Terminals of SELECTOR unit Video input S video input
RCA terminal 1.0VP-P /75 S terminal Y signal : 1.0VP-P /75 C signal : 0.286VP-P /75 Three RCA terminals (one system)
SELECTOR UNIT
Environment (Operating) Temperature 0 to 40 Relative humidity 20 to 80% Pressure 800 to 1,114 hPa Accessories PDP UNIT User's manual Power cord Ferrite core (2) System cable (Video) System cable (Audio) Power cord Remote controller Batteries (Type AA x 2) User's manual (only E model)
SELECTOR UNIT
-4-
Options Stand Wall mounting unit Hanging unit Speaker Speaker stand
Standards P42HHS10WS P42HHS10ES UL,CSA Safety:UL6500 C-UL EMC: FCC Part15 Class B ICES-003 Class B CE Safety: P-SU4H10WS P-SU4H10ES
EN60065
1998 EMC : EN55022 EN61000-3-2 1995 EN61000-3-3, 1995 EN55024 1998 EN61000-4-2, 1995 EN61000-4-3, 1996 EN61000-4-4, 1995 EN61000-4-5, 1995 EN61000-4-6, 1996 EN61000-4-8, 1993 EN61000-4-11,1994
-5-
Model : P42HHA10W/E
Power requirement Current drain Display panel Screen size Aspect ratio Number of pixels Pixel pitch Contrast ratio Luminance Viewing angle Input Terminals Video input S video input 110-240V, 50/60Hz 4.4-1.9A UB type 92.0(W) X 51.8(H) [cm] 36.2(W) X 20.4(H) [inch] 16 : 9 1,024 (H) X 1024 (V) pixels 0.90mm X 0.51mm P42HHA10 1000 : 1 (typ.) 1000 cd/m 2 (ryp.) Max. 160 degrees BNC connector 1.0VP-P /75 S terminal Y signal:1.0VP-P /75 C signal:0.286VP-P /75 Three BNC terminals Y : 1VP-P /75 Pb /B-Y: 0.7VP-P /75 Pr /R-Y: 0.7VP-P /75
24Pin DVI-D (HDCP) Differential Input 0.5V + 10% (RXC +, RX0+, RX1+, RX2 + ) mD-sub:15pin (3 row type) Video : 0.7VP-P /75 SYNC signal : TTL level BNC terminal x 5 R: 0.7VP-P/75 G: 0.7VP-P/75 B: 0.7VP-P/75 H: TTL level or 0.3VP-P /75 V: TTL level or 0.3VP-P /75 8 memories (each RGB1,2,3) Horizontal :15.63 to 80.0MHz Vertical : 50.0 to 120Hz Dot clock:50MHz Max XGA 68MHz Max D-sub 9 pin terminal NTSC/PAL/SECAM/N-PAL/M-PAL /4.43NTSC/PAL60 16.7 million (256 each for R.G.B.) 2 pin terminals(three system) 500mVrms/22k Level terminal 20W+20W (L/R), 4 Width : 103.5cm (40.7 inch) Height: 64.2cm (25.2 inch) Depth : 8.5 cm ( 3.3 inch) Net weight 28.5kg
Environment (Operating) Temperature 0 to 40 C Relative humidity 20 to 80% Pressure 800 to 1,114 hPa
Accessories
User's manual Remote controller Batteries (Type AA x 2) Power cord Ferrite core (2) P-TT4200 P-WB4200 0 to 15 mounting angle
RGB 1 input
RGB 2 input
RGB 3 input
UL,CSA Safety:UL6500 CSA C22.2 No. EMC: FCC Part15 Class A ICES-003 Class A CE Safety:
EN60065 A1 A2 A3 A4
EN60065 A1 A2 A3 A4 EN55022 Class B EN61000-3-2, EN61000-3-3, EN55024 EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11,
1992 1993 1993 1995 1997 A1/A2 1995 1995 1998 1995 1996 1995 1995 1996 1993 1994
RS-232C Color system Display colors Audio input Effective max. output Dimensions
EMC : EN55022 A1/A2 Class A EN61000-3-2, 1995 EN61000-3-3, 1995 EN55024 1998 EN61000-4-2, 1995 EN61000-4-3, 1996 EN61000-4-4, 1995 EN61000-4-5, 1995 EN61000-4-6, 1996 EN61000-4-8, 1993 EN61000-4-11,1994
AS Safety : I60065 A1/A2/A3/A4 I60065 A1/A2/A3/A4 EMC : AS/NZS 3548 AS/NZS 3548
-6-
SETTING SIGNALS
This display can store parameter settings for eight additional signals for RGB. To do this, select the desired signal and follow "RGB MODE ADJUSTMENT" in the manual to adjust the parameters. When you finish, the settings will be automatically stored.
* With some input signals, Out of range may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA, 75 Hz or less for XVGA/ SXGA , 60 Hz or less for UXGA.
-7-
FACTORY SET SIGNALS (Component video mode) Horizontal frequency (kHz) Vertical frequency (Hz) Signal
FACTORY SET SIGNALS (Video, S-video mode) Horizontal frequency (kHz) Vertical frequency (Hz) Signal
SDTV 480i SDTV 576i SDTV 480p SDTV 576p HDTV 720p HDTV 720p HDTV 1,080i HDTV 1,080i
The dedicated graphics card is optional. In the 800 x 600 and 1,024 x 768 modes, images of reduced size are displayed on the screen, using size reduction and interpolation. Also note that on-screen information is also displayed in reduced size. " Out of range" appears if the display receives a signal whose characteristic does not fall within the display's permissible range. You can check the input signals with "Information" on the OTHERS Menu screen.
The sync switch (TTL/ANALOG switch) is on the rear of the 13-pin horizontal sync and 14-pin vertical sync terminals.
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 Outer side
Ground
1 2 3 4 5 6 7 8 9
DCD (Data Carrier Detect) RD (Receive Data) TD (Transmit Data) DTR (Data Terminal Ready) GND (Ground) DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) RI (Ring Indication)
-8-
SCART TERMINAL
20 1816 1412 10 8 6 4 2
Pin No. 1 2 3 4 5 6
Input Signal Right audio Audio ground Blue ground Left audio Blue
Pin No. 8 9 10 11 12 13 14
Pin No. 15 16 17 18 19 20 21
21 17 13 9 5 1 19 15 11 7 3
-9-
3-pin outlet
Selector
3-pin outlet
1. Connect the following items to the selector and the display Selector and display Connect these two with the provided system connection cable. (For details, see the page on the right.)a Speakers For how to connect speakers, see the instructions provided with the speakers. 2. Connecting the power cord Connect the power plug of the display and selector power cords to a 3-pin outlet.
- 10 -
Model : P42HHS10W
Power input
Audio terminal
Picture terminal
To AC outlet
VIDEO1
VIDEO2
VIDEO4
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
PB/CB
PR/CR VIDEO5
PB/CB
PR/CR VIDEO1
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PB/CB
DISPLAY OUTPUT
- 11 -
Model : P42HHS10W/E
Selector
VCR
Satellite tuner
PC
DVD player
Video camera
- 12 -
Model : P42HHS10W
VCR
Connect the video signal cable to either the S-video input terminal or the video input terminal.
To S-video output
To video output
To audio outputs
To audio inputs
VIDEO1 VIDEO2
To video input
VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
PB/CB
PR/CR VIDEO5
PB/CB
PR/CR VIDEO1
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PB/CB
DISPLAY OUTPUT
- 13 -
DVD PLAYER
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To audio inputs
VIDEO4 VIDEO5 VIDEO6
To video input
RGB1 RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
PB/CB
PR/CR VIDEO5
PB/CB
PR/CR VIDEO1
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PB/CB
DISPLAY OUTPUT
AMPLIFIER
Connect the audio signal cable to either the digital output or the analog audio output. The signal input as digital input is not output as analog audio. The digital audio input terminal on the display complies with a sampling frequency of 48 kHz. In the case of outputs with another frequency, connect to an audio system (amplifier) .
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
PB/CB
PR/CR VIDEO5
PB/CB
PR/CR VIDEO1
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PB/CB
DISPLAY OUTPUT
- 14 -
SATELLITE TUNER
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To S-video output
To video input
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
PB/CB
PR/CR VIDEO5
PB/CB
PR/CR VIDEO1
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PB/CB
DISPLAY OUTPUT
- 15 -
Model : P42HHS10W/E
VIDEO CAMERA
A video camera can conveniently be connected to the Video 3 input on the front side. Connect the video signal cable to either the S-video input terminal or the video input terminal. If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
To S-video output
To S-video input
VIDEOGAME MACHINE
As the connecting cable differs with videogame machines, please consult the instructions for your videogame machine. Connect the video signal cable to either the S-video input terminal or the video input terminal. Ensure that the same image (pattern) is not displayed on the screen for an extended period. If the same image is displayed on the screen for an extended period, the brightness of that part of the screen may change and image burn-in may leave an after-image on the screen. If the videogame machine to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
To S-video output
To S-video input
Model : P42HHS10W
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient.
To audio output
To audio input
VIDEO1
VIDEO2
VIDEO4
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
PB/CB
PR/CR VIDEO5
PB/CB
PR/CR VIDEO1
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PB/CB
DISPLAY OUTPUT
- 17 -
Model : P42HHS10E
Power input
Audio terminal
Picture terminal
To AC outlet
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
VIDEO1 mD-sub
RGB2
PB/CB
PB/CB
DISPLAY OUTPUT
- 18 -
VCR
Connect the video signal cable to the SCART terminal.
To SCART output
To SCART input
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
VIDEO1 mD-sub
RGB2
PB/CB
PB/CB
DISPLAY OUTPUT
- 19 -
DVD PLAYER
Connect the video signal cable to either the component video terminal or the SCART terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To audio inputs
VIDEO6 RGB1 RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
VIDEO1 mD-sub
RGB2
PB/CB
PB/CB
DISPLAY OUTPUT
AMPLIFIER
Connect the audio signal cable to either the digital output or the analog audio output. The signal input as digital input is not output as analog audio. The digital audio input terminal on the display complies with a sampling frequency of 48 kHz. In the case of outputs with another frequency, connect to an audio system (amplifier) .
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
VIDEO1 mD-sub
RGB2
PB/CB
PB/CB
DISPLAY OUTPUT
- 20 -
SATELLITE TUNER
Connect the video signal cable to either the component video terminal or the SCART terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To audio outputs
To SCART input
VIDEO5
To audio inputs
VIDEO6 RGB1 RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
VIDEO1 mD-sub
RGB2
PB/CB
PB/CB
DISPLAY OUTPUT
- 21 -
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient.
To audio output
To audio input
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
VIDEO1 mD-sub
RGB2
PB/CB
PB/CB
DISPLAY OUTPUT
- 22 -
Model : P42HHA10W/E
VCR
Satellite tuner
PC
DVD player
- 23 -
Model : P42HHA10W
VCR
Connect the video signal cable to either the S-video input terminal or the video input terminal.
To S-video output
To audio inputs
To S-video input
To video input
- 24 -
DVD PLAYER
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To video output To audio outputs To S-video output To component video output To component video input
To audio inputs
To S-video input
To video input
SATELLITE TUNER
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To audio inputs
To S-video input
To video input
- 25 -
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (DVI-D) To RGB output (mD-sub) To audio output To RGB2 input (mD-sub) To audio input To RGB1 input (DVI-D)
- 26 -
Model : P42HHA10E
VCR
Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.) Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.)
To SCART output
To SCART input
An example of the underside of the display (with the P-TE1000E installed in the P42VHA10)
To video output To S-video output To audio output
To audio input
To S-video input
To video input
An example of the underside of the display (with the P-TE1010E installed in the P42VHA10)
- 27 -
DVD PLAYER
Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.) Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. (When the P-TE1010E is installed.) If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To SCART output
To component video output To audio output To component video input To SCART input To audio input
An example of the underside of the display (with the P-TE1000E installed in the P42VHA10)
To component video output To video output To S-video output To audio output
To audio input
To S-video input
An example of the underside of the display (with the P-TE1010E installed in the P42VHA10)
- 28 -
SATELLITE TUNER
Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.) Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. (When the P-TE1010E is installed.) If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To SCART output
To component video output To audio output To component video input To SCART input To audio input
An example of the underside of the display (with the P-TE1000E installed in the P42VHA10)
To component video output To video output To S-video output To audio output To video input
To audio input
To S-video input
An example of the underside of the display (with the P-TE1010E installed in the P42VHA10)
- 29 -
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (DVI-D) To RGB output (mD-sub) To audio output To RGB2 input (mD-sub) To audio input To RGB1 input (DVI-D)
An example of the underside of the display (with the P-TE1000E installed in the P42VHA10)
- 30 -
PC
- 31 -
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (DVI-D) To RGB output (mD-sub) To audio output To RGB2 input (mD-sub)
To audio input
- 32 -
This lamp shows the state of the power supply. Lit (red): Lit (green): Lit (orange): Stand-by Power ON Power saving (DPMS: Power saving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction.) Remote control signal receiver Receives signals from the remote control. Input mode selector button Input mode selector button [MODE] [MODE]
Switches between picture input modes. VOL + button VOL - button Adjusts the sound volume. Wide screen selector button [WIDE] Switches the screen over to a desired wide screen. ON/OFF button Turns the power "ON" and "OFF (standby state)".
- 33 -
Model : P42HHS10W/E
power switch When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned "ON" or "OFF" by the remotye control or on the control panel of the display. When passed while in the "ON " state, the power indicator lamp goes out and the display is placed in the "OFF" state. Display input (picture) terminal Connect this terminal to the display output terminal on the tuner using the special cable provided. Display input (audio) terminal Connect this terminal to the display output terminal on the tuner using the special cable provided. External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. *See the speakerer instruction manual for more information. Power input terminal Connect this terminal to the power cable supplied with the display.
- 34 -
Model : P42HHA10W
/I power switch When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state, the power indicator lamp goes out and the display is placed in the "OFF" state where power is still partly supplied. RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. RGB1 input terminal (RGB1 INPUT/DVI-D) Connect this terminal to the PC's display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded. RGB2 input terminal (RGB2 INPUT/mD-sub) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. Power input terminal Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. *See the speaker instruction manual for more information. Audio1 input terminal (AUDIO1 INPUT) Audio2 input terminal (AUDIO2 INPUT) Audio3 input terminal (AUDIO3 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. Component video input terminal (VIDEO3 INPUT) Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player. S-Video input terminal (VIDEO2 INPUT) Connect this terminal to the S-video output terminal of your VCR. Video input terminal (VIDEO1 INPUT) Connect this terminal to the video output terminal of your VCR. Component video input terminal (VIDEO4 INPUT) Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.
- 35 -
Model : P42HHA10E
Videoboard
P-TE1000E type P-TE1010E type
/I power switch When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state, the power indicator lamp goes out and the display is placed in the "OFF" state where power is still partly supplied. RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. RGB1 input terminal (RGB1 INPUT/DVI-D) Connect this terminal to the PC's display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded. RGB2 input terminal (RGB2 INPUT/mD-sub) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. Power input terminal Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. *See the speaker instruction manual for more information. Audio3 input terminal (AUDIO3 INPUT) Audio2 input terminal (AUDIO2 INPUT) Audio1 input terminal (AUDIO1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. + RGB3 input terminal (RGB3 INPUT/BNC) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal. *When RGB3 input terminal is connected, Comp.video mode is not available. Component video input terminal (VIDEO4 INPUT) Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player. *When Comp.video input terminal is connected, RGB3 mode is not available. RGB3 synchronization switch (SYNC SW TTL/ANALOG (75 )) This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 . TTL : Does not terminate. ANALOG (75 ): Terminates. Video1 input terminal (VIDEO1 INPUT/P-TE1000E) Connect this terminal to the SCART terminal of your VCR or DVD, etc. S-Video input terminal (VIDEO2 INPUT/P-TE1010E) Connect this terminal to the S-video output terminal of your VCR. Video input terminal (VIDEO1 INPUT/P-TE1010E) Connect this terminal to the video output terminal of your VCR. Component video input terminal (VIDEO3 INPUT/P-TE1010E) Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.
- 36 -
/I power switch When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON " state, and the power can be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON " state, the power indicator lamp goes out and the display is placed in the "OFF" state where power is still partly supplied. RS-232C terminal (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. RGB1 input terminal (RGB1 INPUT/DVI-D) Connect this terminal to the PC's display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded. RGB2 input terminal (RGB2 INPUT/mD-sub) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. Power input terminal Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. *See the speaker instruction manual for more information. Audio3 input terminal (AUDIO3 INPUT) Audio2 input terminal (AUDIO2 INPUT) Audio1 input terminal (AUDIO1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. RGB3 input terminal (RGB3 INPUT/BNC) Connect this terminal to the PCs display (analog RGB) output terminal. RGB3 synchronization switch (SYNC SW TTL/ANALOG (75 )) This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 . TTL : Does not terminate. ANALOG (75 ) : Terminates.
- 37 -
Model : P42HHS10W/E
SELECTOR SECTION FRONT
Power indicator lamp This lamp shows the state of the power supply. Lit (red): Lit (green): Lit (orange): Stand-by Power ON Power saving (DPMS: Power saving function) mode ON
Flashing (red): Malfunction Remote control signal receiver Receives signals from the remote control. POWER button Turns the power "ON" and "OFF". * Even when the power is "OFF", some parts are still powered. Video3, S-video input terminal * Connect this terminal to the S-video output terminal of your VCR, etc. Video3, video input terminal * Connect this terminal to the video output terminal of your VCR, etc. Audio input terminals (L/R) These are the audio input terminals for the Video3 and RGB3 terminals. Input the audio for the video to be seen here. RGB3 input terminal Connect this terminal to your PC's mD-sub output terminal. * On selecting the video input format
- 38 -
Model : P42HHS10W
VIDEO1
VIDEO2
VIDEO4
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 COMPONENT VIDEO S VIDEO2 COMPONENT VIDEO VIDEO4 S COMPONENT VIDEO S DIGITAL
AUDIO OUTPUT
PB/CB
PR/CR VIDEO5
PB/CB
PR/CR VIDEO1
PB/CB
PR/CR RGB2
COMPONENT VIDEO
mD-sub
PB/CB
PB/CB
DISPLAY OUTPUT
Audio input terminals Input audio through the terminals corresponding to the used video input terminals. The digital input terminals can be matched as desired with the remote control. Audio output terminals For use when the sound from an audio system (amplifier) is used. Video1 input terminal Video2 input terminal Video4 input terminal Connect this terminal to the component video output terminal, S-video output terminal, or video output terminal of your VCR or DVD, etc. Video5 input terminal Video6 input terminal Connect this terminal to the component video output terminal of your DVD, etc. RGB1 input terminal Connect this terminal to the monitor (DVI-D) output terminal of your PC. RGB2 input terminal Connect this terminal to the monitor (mD-sub) output terminal of your PC. Display output terminals (Picture/Audio) Connect these terminals to the picture input terminal and audio input terminals on the display. Power input terminal Connect this terminal to the power cable supplied with the display.
- 39 -
Model : P42HHS10E
VIDEO5
VIDEO6
RGB1
RGB2
AUDIO INPUT
DIGITAL1 DIGITAL2 VIDEO1 SCART SCART VIDEO2 SCART VIDEO4 DIGITAL
AUDIO OUTPUT
VIDEO1 mD-sub
RGB2
PB/CB
PB/CB
DISPLAY OUTPUT
Audio input terminals Input audio through the terminals corresponding to the used video input terminals. * The digital input terminals can be matched as desired with the remote control. Audio output terminals For use when the sound from an audio system (amplifier) is used. Video1 input terminal Video2 input terminal Video4 input terminal Connect this terminal to the SCART terminal of your VCR or DVD, etc. Video5 input terminal Video6 input terminal Connect this terminal to the component video output terminal of your DVD, etc. RGB1 input terminal Connect this terminal to the monitor (DVI-D) output terminal of your PC. RGB2 input terminal Connect this terminal to the monitor (mD-sub) output terminal of your PC. Display output terminals (Picture/Audio) Connect these terminals to the picture input terminal and audio input terminals on the display. Power input terminal Connect this terminal to the power cable supplied with the display.
- 40 -
Model : P42HHS10W/E
REMOTE CONTROL
button Switches between power ON and standby state. DISPLA Y OFF button For showing on-screen-information. PICTURE MODE button Switches the picture mode. AUDIO IN button Selects the input audio. Video input mode selector button [VIDEO 1 - 6] Selects VIDEO 1 - 6 RGB input mode selector button [RGB 1 - 3] Selects RGB 1 - 3. Menu button [MENU] Use this button to display a desired menu for adjusting the picture. Enter button [ENTER] Press this button to finalize the selection of a desired menu or option within a menu.
STILL button Displays a still picture during viewing. MUTE button Temporarily mutes the sound. PICTURE MEMORY button Recalls the PICTURE MEMORY. WIDE button Switches the screen over to a desired wide screen. OFF-TIMER Sets when the power should be turned of f. Volume adjustment buttons [VOL +/- ] Adjust the volume. Press the + button to increase the volume. Press the - button to reduce the volume. Adjustment buttons [ / / / ]
- 41 -
Model : P42HHA10W/E
REMOTE CONTROL
button Switches between power ON and standby state. DISPLA Y OFF button For showing on-screen-information. PICTURE MODE button Switches the picture mode. RGB input mode selector button [RGB 1 - 2] Selects RGB 1 - 2. Video input mode selector button [VIDEO 1 - 3] Selects VIDEO 1 - 3. Menu button [MENU] Use this button to display a desired menu for adjusting the picture. Enter button [ENTER] Press this button to finalize the selection of a desired menu or option within a menu.
MUTE button Temporarily mutes the sound. PICTURE MEMORY button Recalls the PICTURE MEMORY. WIDE button Switches the screen over to a desired wide screen. RGB3/VIDEO4 input mode selector button [RGB3/VIDEO4] Selects RGB3 or VIDEO4. Volume adjustment buttons [VOL +/ - ] Adjust the volume. Press the + button to increase the volume. Press the - button to reduce the volume. Adjustment buttons [ / / / ]
- 42 -
Can be set when Fine is selected as the Picture Mode. Vertical "-" {0 to 255} {0 to 255} {0 to 255}
Picture Memory
PICTURE MEMORY
Yes No Horizontal Vertical Width Height Yes No {-6 to +6} {-6 to +6} {-10 to +10} Off Min. Mid. Max. Clamp Position* 24 Frame Mode Jaggies Filter {-8 to +8} *Only Comp. Video On Off On Off On(OSD : bright) On(OSD : dark) Off
Width "-"
AUDIO IN
Analog Audio Digital Audio 1 Digital Audio 2 Off 30min. 60min. 90min. 120min. Normal Auto Wide 1 Wide 2 Zoom 1 Zoom 2
OFF-TIMER
Width "+"
WIDE
FEATURES
Adjustment* Function
Height "-"
On Screen Menu
OSD
Height "+" Language Normal English Deutsch ~ Espanol Francais Italiano Portugues Name Select Video
~
<
Video 1 Video 2
Wide 1
Video 1 DVD 1 DVD 2 VCR 1 VCR 2 GAME Camcorder STB Satellite Cable TV Video 1 PC 1 PC 2 DVD 1 DVD 2 STB Satellite Cable TV
Wide 2
Input Terminal
Zoom 1
Video input
Auto Video S-video Comp. video Auto 1 Auto 2 NTSC PAL SECAM PAL60 N-PAL M-PAL 4.43NTSC
Video Format
Zoom 2
DVI 1 DVI 2 Auto Off - UNTOUCH Auto Off - NO SIG. Off On Off On
On Off On Off On Off Mode Freq. Scan Mode Input Signal Freq.
FACTORY DEFAULT
Execute
Yes No
- 43 -
Can be set when Fine is selected as the Picture Mode. Vertical "-"
Off Min. Std. Max. Load Save Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8 Size {-30 to +30 (Comp. video -16 to +16)} {-7 to +7 (Zoom -15 to +15) (Comp. video -16 to +16)} {-3 to +12 (Comp. video -2 to +16)} {-3 to +12 (Comp. video -2 to +16)} Vertical "+"
Picture Memory
WIDE
Default Position Size Default AUDIO Treble Bass Balance Loudness FEATURES Adjustment* Function On Screen Menu
Yes No Horizontal Vertical Width Height Yes No {-6 to +6} {-6 to +6} {-10 to +10} On Off Clamp Position* 24 Frame Mode OSD {-8 to +8} *Only Comp. Video On Off On(OSD : bright) On(OSD : dark) Off English Deutsch ~ Espanol Francais Italiano Portugues
~
Width "-"
Width "+"
Height "-"
Language
Height "+"
<
RGB 1 RGB 2
RGB 1 PC 1 PC 2 DVD 1 DVD 2 STB Satellite Cable TV Video 1 DVD 1 DVD 2 VCR 1 VCR 2 GAME Camcorder STB Satellite Cable TV
Wide 1
Mask Off
Wide 2 Input Terminal Video Input S-video Input Auto 1 Auto 2 NTSC PAL SECAM PAL60 N-PAL M-PAL 4.43NTSC RGB-PC Decoder
Mask 5
Zoom 1
D-SUB Input
Mask
Zoom 2
Off 5 10 15
Mask 10
DVI 1 DVI 2 RGB 1 RGB 2 Video 1 Video 2 Video 3 Video 4 No Audio Audio 1 Audio 2 Audio 3
Mask 15
FACTORY DEFAULT
Execute
Yes No
- 44 -
PICTURE
{-30 to +30} {-60 to +60} {-60 to +60} {-60 to +60} {-4 to +4} Dynamic Fine Real 1 Real 2 Static Luminance Black Level Color Temp. User Colour Temp. {40 to 100%} {-15 to +15} Width "+"
ENTER
Precision Setting
Can be set when Fine is selected as the Picture Mode. Height "-" {0 to 255} {0 to 255} {0 to 255}
{-3500 to +3500} Red Green Blue Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory 6 Memory 7 Memory 8
Load
Height "+"
PICTURE MEMORY
AUDIO IN
WIDE
{1 to 32}
Yes No
<
Video
Video 1 DVD 1 DVD 2 VCR 1 VCR 2 GAME Camcorder STB Satellite Cable TV Video 1 PC 1 PC 2 DVD 1 DVD 2 STB Satellite Cable TV
Input Terminal
Video input
Auto Video S-video Comp. video Auto 1 Auto 2 NTSC PAL SECAM PAL60 N-PAL M-PAL 4.43NTSC
Video Format
Position
Horizontal "-"
DVI 1 DVI 2 Auto Off - UNTOUCH Auto Off - NO SIG. DPMS Off On Off On Time Off 1 min. 15 min. 45 min. 60 min. Black White White Screen Exhibition Mode Illumination Information On Off On Off On Off Mode Freq. Scan Mode Input Sync Freq. Preset No.
Vertical "-" Background Screen Orbiter Mode / Time Off Time Mode Min. Std. Max.
Moving Area Vertical "+" Direct Setting Auto VGA WVGA 480P XGA WXGA Auto Manual
Code Setting
FACTORY DEFAULT
Execute
Yes No
- 45 -
Can be set when Fine is selected as the Picture Mode. Height "-"
Load Save
Height "+"
Yes No Horizontal Vertical Width Height Yes No {-6 to +6} {-6 to +6} {-10 to +10} On Off Dot Clock Clock Phase Clamp Position Auto Calibration {-60 to +60} Auto Manual {-8 to +8} Execute On(OSD : bright) On(OSD : dark) Off English Deutsch ~ Espanol Francais Italiano Portugues
~
{1 to 32}
Yes No
On Screen Menu
OSD
Language
<
Normal Name Select RGB 1 RGB 2 RGB 1 PC 1 PC 2 DVD 1 DVD 2 STB Satellite Cable TV Video 1 DVD 1 DVD 2 VCR 1 VCR 2 GAME Camcorder STB Satellite Cable TV
Mask Off
Wide
Mask 5
Zoom
Input Terminal
Position
Auto 1 Auto 2 NTSC PAL SECAM PAL60 N-PAL M-PAL 4.43NTSC RGB-PC Decoder Mask Off 5 10 15
Mask 10
Mask 15
DVI 1 DVI 2 Time Off 1 min. 15 min. 45 min. 60 min. Black White No Audio Audio 1 Audio 2 Audio 3 Code Setting White Screen Exhibition Mode
Direct Setting
Background Audio Input Vertical "-" RGB 2 Video 1 Video 2 Video 3 Video 4 Screen Orbiter Vertical "+" Moving Area Mode / Time RGB 1
Auto VGA WVGA 480P XGA WXGA SXGA SXGA+ Auto Manual On Off On Off Mode Freq. Scan Mode Input Sync Freq. Preset No. {00 to 27} *Hexadecimal
Information
FACTORY DEFAULT
Execute
Yes No
- 46 -
1. Display
(1) OSD Three kinds of error messages are displayed on the screen, and the power is turned off 10 sec later. (2) LED LED error is displayed continuously after the power is turned off.
Check point
Fan (Display unit) Main power PCB (Display unit) Main PCB (Display unit) Ambient temperature of unit Main PCB (Display unit) Temp. sensor IC757 (Display unit) Main PCB (Display unit) Main(Digital/Video) PCB (Selector unit)
EEPROM error
Check point
Main power PCB PDP panel
1 time Flashes once every 4 sec. (Red) 2 times Flashes twice every 5 sec. (Red)
PDP panel AC error EEPROM error 3 times Flashes three times every 6 sec. (Red) Audio circuit faulty 5 times Flashes five times every 8 sec. (Red) Selector unit
Fan Main power PCB Main PCB Ambient temperature of unit Temperature sensor IC757 Main PCB Panel AC Main PCB Audio PCB Assy
LED lamp display status Steady light (Red) Continuous Flashes continuously (Red)
Check point
Main power PCB
EEPROM error 3 times Flashes three times every 6 sec. (Red) Main(Digital) circuit faulty 4 times Flashes four times every 7 sec. (Red) Audio circuit faulty 5 times Flashes five times every 8 sec. (Red)
- 47 -
Model : P42HHA10W/E
1. Display
(1) OSD Three kinds of error messages are displayed on the screen, and the power is turned off 10 sec later. (2) LED LED error is displayed continuously after the power is turned off.
On screen display
ERROR MESSAGE CONDITION 1
Check point
Fan Main power PCB Main/Digital PCB Ambient temperature of unit Main/Digital PCB Temp. sensor IC757
(2) LED
Check point
Main power PCB PDP panel
1 time Flashes once every 4 sec. (Red) 2 times Flashes twice every 5 sec. (Red)
Fan Main power PCB Main/Digital PCB Ambient temperature of unit Temperature sensor IC757 Main/Digital PCB Main/Digital PCB Video PCB Assy
4 times Flashes four times every 7 sec. (Red) 5 times Flashes five times every 8 sec. (Red)
- 48 -
Note : 1. Since a voltage is applied to the Main Power PCB heat sinks while the set is operating, do not touch the heat sinks.
Display unit Turn power on and check state of lamp. LAMP STATE Not lighted. POWER SUPPLY STATE Power supply circuit faulty. REMEDY Replace Main Power PCB. Vs and Va must be adjusted. RED
Power turned off immediately. Power turned off after 10 sec. Power turned off after 10 sec. Power not turned off, LED blinks only.
Check 1
RED
Blinks once
Check 2
RED
Blinks twice
Check 3
RED
RED
GREEN
NO
YES
- 49 -
Model : P-SU4H10W/E
Note : 1. Since a voltage is applied to the Main Power PCB heat sinks while the set is operating, do not touch the heat sinks.
RED
Check 1 4
RED
Power not turned off, LED blinks only. Power not turned off, LED blinks only. Power not turned off, LED blinks only.
Replace Main(Digital) PCB Assy. Replace Main(Digital) PCB Assy. Replace Main(Video) PCB Assy.
RED
RED GREEN
Blinks five times Lights steadily for more than 10 sec. Replace display unit and operates OK?
YES
Check display unit
NO
Check 5
All input image faulty. Video input image faulty. S-video input image faulty. Component video input image faulty. RGB input image faulty.
Check 6
Check 7
Check 8
- 50 -
Model : P42HHS10W/E
Check 1
Start Power supply protector operated
Power lamp : Flashing continuously in red. (at an interval of 1 sec.)
(1) Pull out Power Cord Plug and disconnect connectors CN6, CN23, CN33, CN42 and CN52 on Main Power PCB. (2) Connect pin 1 and pin 13 of CN352 through a 1/4W, 1K resistor. Connect pin 1 of CN352 and pin 5 of CN309 through a 1/4W, 1K resistor. CN502 shorted. (3) Plug in Power Cord Plug and turn on power switch.
(1) Pull out Power Cord Plug and disconnect connectors CN351 and CN352 on Main Power PCB. (2) Connect pin 1 and pin 13 of CN352 through a 1/4W, 1K resistor. Connect pin 1 of CN352 and pin 5 of CN309 through a 1/4W, 1K resistor. CN502 shorted. (3) Disconnect connectors on Main Power PCB. (CN6, CN23, CN33, CN42, CN52) (4) Plug in Power Cord Plug and turn on power switch.
No
Yes
(1) Pull out Power Cord Plug and connect connectors CN351 and CN352 to Main Power PCB. (2) Plug in Power Cord Plug and turn on power switch. (3) Check state of green lamp.
- 51 -
Check 2
Fan protector operated
Check 3
Temperature protector operated
Power lamp: Flashes once intermittently in red. (For 0.5 sec. at an interval of 4 sec.)
Start
Power lamp : Flashes intermittently twice in red. (For 0.5 sec. at an interval of 5 sec.)
Start
Is voltage at connectors CN352 and on Main PCB 14V? No Is ambient temperature of IC757 on Main PCB less than 60 ? No
Yes Yes Power Supply Unit circuit faulty. No Replace Main Power PCB. Vs and Va must be adjusted. Yes No Does unit operate normally when temperature sensor IC757 changed ?
- 52 -
and -
of CN953, 954
5V to 11V.
Yes
Replace fan.
Yes
Check 4
Start
(1) Pull out Power Cord Plug and disconnect connectors CN202, CN203, CN204 on Main Power PCB. (2) Plug in Power Cord Plug and turn on power switch.
No
Yes
(1) Pull out Power Cord Plug and connect connectors CN202, CN203, CN204 to Main Power PCB. (2) Pull out Power Cord Plug and disconnect connectors CN4101, CN4155 on Audio-selector PCB (3) Plug in Power Cord Plug and turn on power switch. (4) Check state of green lamp.
- 53 -
Check 5
Start
Yes
No
No
- 54 -
Check 6
Start
No
Yes
(1) Make sure connectors CN3402-CN1101 are properly inserted. (2) Make sure PCBs M02CZ and M02GL(M02GM) are correctly connected. (3) Is signal at connector CN3402 -Video, -Y/ -pin C(CN1101 -Video,
-Y/
-C) correct?
No
Yes
- 55 -
Check 7
Start
No
Yes
(1) Make sure PCBs M02CZ and M02GL(M02GM) are correctly connected.
Yes
No Only VIDEO 5/6(RGB2/3) abnormal? Yes Selector circuit faulty Replace Video selector PCB
No Is 525i/625i signal correctly displayed? No Is signal input level normally? No Yes Signal processing circuit faulty Replace Main(Video) PCB Assy Yes Signal processing circuit faulty Replace Main(Video) PCB Assy
- 56 -
Model : P42HHA10W/E
Note : 1. Since a voltage is applied to the Main Power PCB heat sinks while the set is operating, do not touch the heat sinks. 2. If the Main Power PCB insulation sheet is not installed when assembling, the Main Power PCB fuse will blow.
Turn power on and check state of lamp. LAMP STATE Not lighted. POWER SUPPLY STATE Power supply circuit faulty. REMEDY Replace Main Power PCB. Vs and Va must be adjusted. RED Blinks Blinks continuously. continuously. Power turned off immediately. Power turned off after 10 sec. Power turned off after 10 sec. Power not turned off, LED blinks only. Power not turned off, LED blinks only.
Check 1
RED
Blinks once
Check 2
RED
Blinks twice
Check 3
RED
RED
GREEN
NO
Check 4
YES All input image faulty. Video input image faulty. S-video input image faulty. Component video input image faulty. RGB input image faulty.
Signal processing PCB faulty. Check 5 Replace Main/Digital PCB Assy.
Check 5
Check 6
Check 7
- 57 -
Check 1
Start
(1) Pull out Power Cord Plug and disconnect connectors CN6, CN23, CN33, CN42 and CN52 on Main Power PCB. (2) Connect pin 1 and pin 13 of CN352 through a 1/4W, 1K resistor. Connect pin 1 of CN352 and pin 5 of CN509 through a 1/4W, 1K resistor. CN502 shorted. (3) Plug in Power Cord Plug and turn on power switch.
(1) Pull out Power Cord Plug and disconnect connectors CN351 and CN352 on Main Power PCB. (2) Connect pin 1 and pin 13 of CN352 through a 1/4W, 1K resistor. Connect pin 1 of CN352 and pin 5 of CN509 through a 1/4W, 1K resistor. CN502 shorted. (3) Disconnect connectors on Main Power PCB. (CN6, CN23, CN33, CN42, CN52) (4) Plug in Power Cord Plug and turn on power switch.
No
Yes
Pull out Power Cord Plug and connect connector CN351 and CN352 to Power Supply Unit. Remove Video PCB Assy. Plug in Power Cord Plug and turn on power switch. Check state of green lamp.
No
- 58 -
Check 2
Fan protector operated
Check 3
Temperature protector operated
Power lamp: Flashes once intermittently in red. (For 0.5 sec. at an interval of 4 sec.)
Start
Power lamp : Flashes intermittently twice in red. (For 0.5 sec. at an interval of 5 sec.)
Start
Is voltage at connectors CN352 and on Main PCB 14V? No Is ambient temperature of IC757 on Main/Digital PCB less than 60 ? No
Yes Yes Power Supply Unit circuit faulty. No Replace Main Power PCB. Vs and Va must be adjusted. Yes No Microcomputer peripheral circuit faulty. Replace Main/Digital PCB Assy. Does unit operate normally when temperature sensor IC757 changed ?
- 59 -
+ and 5V to 11V.
Yes
Replace fan.
Yes
Check 4
Start
Yes
No
No
Yes
- 60 -
Check 5
Start
Yes
No Is picture displayed on screen normal when new video PCB unit installed ?
Yes
No
Yes
No
- 61 -
Check 6
Start
Yes
No Is picture displayed on screen normal when new Video PCB Unit installed ?
Yes
No Are brightness and color difference signals connected to input terminals correctly ? Yes Is signal input level normally? No Yes Signal processing circuit faulty. Replace Main/Digital PCB Assy.
No
- 62 -
Check 7
RGB input is abnormal. Start
Is horizontal i o sync. signal input to pin 13 and vertical sync . signal input to pin 14 of RGB cable le ?
No
Yes
- 63 -
Connect RGB cable to terminal. Is Sync. signal TLL and polarity negative ? No
Yes
Is frequency of horizontal sync. and vertical sync signals within specified range ? No Check input signal.
Yes No Check input signal. Make sync. signal polarity output from signal source negative, or make output impedance TTL.
Yes
Signal processing circuit faulty. . Note(): If the synchronizing signal cannot be identified by TTL level, it in the 75 terminated state.
1. How to measure the voltages on the Main Power Supply PCB in protect mode.
Since a voltage is applied to the Main Power PCB heat sinks while the set is operating, do not touch the heat sinks. After the power cord plug was pulled out, do not pull out the connector on the Main Power PCB until the Green LED (D531: Discharge check LED) turns off. 1) Disconnect CN6, CN23, CN33, CN42 and CN52 2) Connect pin 1 and pin 13 of CN352 through a 1/4W, 1k
resistor. Connect pin 1 of CN352 and pin 5 of CN509 through a 1/4W, 1k resistor. CN502 shorted.
3) Press the power button. 2. On the Main Power Supply PCB. (M02FQ)
CN352
No. 1 3 6 NAME P5V +14V -8V SPEC. 5.0V +/- 0.25V 14.0V +/- 0.7V -8.0V +/- 0.4V
CN351 Ground
5 5 7 No. 3 7 12 NAME +2.5V +3.3V +6.5V SPEC. 2.5V +/- 0.13V 3.3V +/- 0.17V 6.5V +/- 0.33V
Ground
2 6
11
CN33
No. 1 9 NAME Vcc 1 Vs SPEC. 5.1V +/- 0.25V 82.5V +/- 1.5V
CN23 Ground
2 5 No. 1 NAME Va SPEC. 60.0V +/- 1.3V
Ground
4
CN6
No. 1 NAME Vpri2 SPEC. 3.3V +/- 0.15V
Ground
3
- 64 -
V S AND V A ADJUSTMENT
When the Main Power Supply PCB and PDP panel are replaced, Vs and VA must be adjusted.
: Heat-run for 5 minutes with a white pattern in the wide mode. : Adjust the VS and VA in the no-signal state. : Refer to the drawing shown below.
Adjustment points : Refer to the drawing shown below. Adjustment value : Within +/- 0.1V of voltage indicated on the label of the PDP panel.
CN3
T2
T3
T4
VA ADJ VR581
VS ADJ. VR582
VS & V A check point CN508 1 pin GND 2 pin NC 3 pin VA 4 pin VS
CN901 CN509 CN507 CN1 CN2 CN352 CN351 CN502 CN33 CN7 CN6
- 65 -
Model : P42HHS10W/E
OPTICAL FILTER KP #300MESH T2.5 GLS H2
FUN
M02DYA
FUN
M02DX
M02DYC
M02DYB
POWER SWITCH
- 66 -
Model : P42HHA10W
OPTICAL FILTER KP #300MESH T2.5 GLS H2
INLET
M02GNA
CONNECTION PCB
FUN
M02EX
FUN
M02GD M02GND
MAIN / DIGITAL
(SIGNAL PROCESSING)
VIDEO
AUDIO
M02GNB
TERMINAL
M02GNE
M02GNC
POWER SWITCH
- 67 -
INLET
Model : P42HHA10E
OPTICAL FILTER KP #300MESH T2.5 GLS H2
M02GNA
CONNECTION PCB
FUN
M02EX
FUN
M02GC M02GND
MAIN / DIGITAL
(SIGNAL PROCESSING)
M02GNB
TERMINAL
M02GNE
M02GNC
POWER SWITCH
- 68 -
Model : P-SU4H10W
M02CNF
LED (R) PHOTO / LED
M02CNC
M02CNE
LED (L)
M02CND
M02DB
INLET
M02GL
TERMINAL
VIDEO SELECTOR
MAIN / DIGITAL
(SIGNAL PROCESSING)
AUDIO SELECTOR
- 69 -
Model : P-SU4H10E
M02CNF
LED (R) PHOTO / LED
M02CNC
M02CNE
LED (L)
M02CND
M02DB
INLET
M02GM
M02CZ
M02CV
M02CNA
TERMINAL
VIDEO SELECTOR
MAIN / DIGITAL
(SIGNAL PROCESSING)
AUDIO SELECTOR
- 70 -
A BC
B: Audio PCB
C: Main PCB
- 71 -
- 72 -
- 73 -
- 74 -
3. Remove the Base Frame from the Front Case together with the panel and PCBs.
* View after removal of the Base Frame from the Front Case.
- 75 -
* View after the Front Case Panel Unit and PCBs were removed. 4. Remove the Main Power PCB. (To remove the Main Power PCB, refer to the Page 72)
- 76 -
8. Remove the Base Frame together with wires and other parts.
* View after only the PDP Unit was removed. * Replace the removed parts back in the correct places when the PDP Unit is replaced.
- 77 -
1. Remove the PDP Unit and 8 circled screws. (To remove the PDP Unit, refer to Page 75)
2. Pull the Bezel Front in the direction of arrow. (Repeat the same procedure on the other 3 locations.)
* View after the both top and bottom Bezel Front removed.
3. Pull toward the direction of arrow. (Remove the other side in a same manner)
- 78 -
- 79 -
1. Remove the PDP Unit, 1 circled screw and Key Switch Unit. (To remove the PDP Unit, refer to Page 75)
- 80 -
Model : P42HHA10W/E
1. Removing the Rear Case (1 of 2)
A B E CD
B: Audio PCB
- 81 -
C: Component PCB
D: Video PCB
- 82 -
- 83 -
- 84 -
- 85 -
1. Remove the Rear Case, Component PCB and Video Unit. (Refer to Page 84, 85) 2. Disconnect the 9 circled connectors.
- 86 -
- 87 -
Model : P-SU4H10W/E
1. Removing the Tope Cover (1 of 2)
- 88 -
C: Terminal PCB
- 90 -
- 91 -
1. Remove the Top Cover and Audio Selector PCB. (To remove the Audio Selector PCB, refer to the Page 91) 2. Remove the 4 circled screws and the shield bracket.
- 92 -
1. Remove the Top Cover and Audio Selector PCB. 2. Remove the Terminal PCB and disconnect the 2 circled connectors. (Refer to Page 91, 92)
- 93 -
1. Remove the Top Cover and Audio Selecror PCB. 2. Remove the Terminal PCB and Video Selector PCB. (Refer to Page 91, 92, 93) 3. Disconnect the 7 circled connectors.
- 94 -
- 95 -
- 96 -
- 97 -
- 98 -
1. Remove the Top Cover and Main Power PCB. (To remove the Main Power PCB, refer to the Page 90) 2. Remove the 3 circled screws.
- 99 -
PARTS LIST
Ref.no. Description Cabinet Bezel Front Top Bezel Front Btm Bezel Front L Bezel Front R Panel Rear Electric Fan Motor Optical Filter Audio PCB Main PCB Main Power PCB Key Photo PCB Power Switch PCB PDP Unit Button Key Switch Button Main Switch Power Cord UL/CSA VDE Packing Audio Cable DVI Cable Carton Top Carton Bottom Packing Joint-D Packing Pad-Top Packing Pad-Bottom Carton Accessory
P42HHS10WS 8114509006 8114510002 8114511009 8114512006 8114554006 8900295007 8114890005 8115077009 8115818008 8115830000 8115079003 8115081006 S141011609 8114519005 8114518008 8111725003 ---------------8115072004 8115073001 8114549002 8114547008 8108655009 8114551005 8114550008 8111799004
P42HHS10ES
---------------8111726000
: Same as left
- 100 -
Ref.no. Description Cabinet Bezel Front Top Bezel Front Btm Bezel Front L Bezel Front R Panel Rear Electric Fan Motor Optical Filter Audio PCB Main/Digital PCB Main Power PCB Key Photo PCB Power Switch PCB PDP Unit Button Key Switch Button Main Switch Power Cord UL/CSA VDE Connection PCB I/O PCB Video PCB Remoto Controller Packing Carton Top Carton Bottom Packing Joint-D Packing Pad-Top Packing Pad-Bottom Carton Accessory
P42HHA10WS 8114509006 8114510002 8114511009 8114512006 8114861005 8900298008 8114890005 8114949000 8115824009 8115830000 8114951003 8114957005 S141011609 8114519005 8114518008 8111725003 ---------------8114953007 8114952000 8115842003 8114649016 8114549002 8114547008 8108655009 8114551005 8114550008 8111799004
P42HHA10ES
8115826003
: Same as left
- 101 -
Ref.no. Description Cabinet Front Assy Cover Top Chassis Botton Electric Main Power PCB Main/Digital PCB Audio Selector PCB Terminal PCB Video Selector PCB Led/Photo PCB LED L PCB LED R PCB Interface PCB Remoto Controller Power Cord UL/CSA VDE Packing Carton Pad Set
P-SU4H10WS 8115262009 8111051003 8111060005 8115854006 8115844007 8114796000 8115858004 8115852002 8114800004 8114804002 8114806006 8114802008 8114650012 8111725003 ---------------8115110003 8115104002
P-SU4H10ES
8115123003 8115858004
---------------8114519005
: Same as left
- 102 -
Transportation
Bad loading
Handling
Never topple. Never drop.
- 103 -
4
Don't stack the plasmavision over three units high.
- 104 -
FUJITSU GENERAL CUSTOMER SERVICE LIMITED GLOBAL SUPPORT DIVISION DECEMBER 2002