- 1 -

China Steel CorporationCSCwas established in December 1971 and started its production in December 1977. After
four consecutive stages of expansion, the annual production capacity of crude steel has reached 11.5 million metric
tons. The major of products are include steel plates, steel bars, wire rods, hot-rolled coils, cold-rolled coils, coated
coils, electrical steel coils, and electro-galvanized coils. All of these products are widely used in various downstream
manufacturing industry enhancing competitiveness and forming a mutual beneficial interdependence between the
CSC and customers. And CSC proved it to be a reliable and innovated supplier of steel products. The accreditation
certificate of ISO 9001, ISO/TS 16949,IECQ,ELV,Taiwan Accrediation Foundation (TAF) and J IS mark approvals
were obtained to demonstrate CSC's commitment to keep progressing in quality management system.
Providing cost-effective and superior quality of products and services to diversity of satisfied customer is the
original mission of CSC. The company has therefore put a great deal of effort in expanding and modernizing its
facilities, and continually improving the products quality and developing new products as well to help customers to
create more value-added products. The newly developed steel plate products such as ASTM A841 GR.B CL. 2
TMCP, JIS G3101 SS400 (Laser cut plate), CSC LYS100, CSC PZ30H, CNS 13812 SN490YB/YC, CSC
PZ590T, CSC PH490TB, CSC SM570M and ASTM A516 HIC were introduced to meet the stringent market
demands.



Plant Greenery

1. Brief Introduction
- 2 -


ASTM A841 Gr.B Class2
thermal-mechanical control process (TMCP) steel plates for pressure vessels possessing high
yield strength, high Charpy absorption energy at low temperature and low carbon content to
obtain excellent weldability that are best used in pressure vessel at low temperature environment
(note: heat-treatment temperature during or after fabrications shall not exceed 650
JIS G3101 SS400 -Steel Plates for Laser Cutting
steel plates having special surface quality to prevent problems from laser cutting such as nozzle
blocking or miss-focusing, and providing good cutting quality
CSC LYS 100
steel plates having excellent seismic resistance due to properties of extremely low yield strength
and yield ratio that are best used in steel structural parts of buildings for absorbing elastic
potential energy released by earthquake and protect main structure
CSC PZ30H
chromium and molybdenum steel plates with excellent formability to attain high dimensional &
shape accuracy after forming, also possessing excellent wear-resistance, toughness, heat-
resistance to prevent abrasion or fracture that are best used in mold
CNS 13812 SN490YB/YC
steel plates with yield/tensile strength ratio below 80% (Y.S: 325~445 MPa) to absorb maximum
elastic potential energy released by earthquake that enable uniform plastic deformation within
thickness range of 40.01~80.00mm and prevent buildings & constructions from collapsing.
CSC PZ590T
high strength structural steel plates belonging to HI-TEN590C group, possessing very low C,S,P
elements to obtain excellent weldability & toughness that are best used in heavy machinery such
as forks of power lift truck and dipper buckets of hydraulic shovel
CSC PH490TB
structural steel plates possessing characteristics of fire-resistance through effects of alloying
elements, providing feature of yield strength at 600C (873K) being 2/3 or more of the specified
minimum yield strength at room temperature that are best used in fire-resistant structure of
high-rise buildings, factories and laboratories
CSC SM570M (Building Structure with)
structural steel plates of ultra high strength, excellent weldability & toughness, classified into 4
classes (A, B, C and C HW; C HW class is applicable to high heat input welding) that are best
used in structure of high-rise buildings such as Taipei 101 and Taipei Gemini towers
ASTM A516 HIC (The pressure vessel of Hydrogen Induced Crack resistant)
steel plates of ultra low C,P,S elements, proper alloy addition and special process, providing
resistance to hydrogen induced cracking (HIC) and controlling crack length ratio (CLR) below
15% that are best used in those environments with high H
2
S
Brief introduction of new products are as follows:
- 3 -

)$ ,[[ ,[|[,,|[ [[V ,[|[,,|[


[[[[ ,[[|[,,|[ [,Q ,[[|[,,|[
- 4 -




$( 900 ,[[|[,,|[ $(/|$ (949 ,[[|[,,|[
-5- -6-
2. Manufacturing Process
Iron Ore
Lime stone
Blast Furnace
Basic Oxygen
Furnace
Ladle Injection
Station
Slab Continuous
Caster
Inspection and Testing
Scarfing
Stirring Station
Coke
M
a
n
u
f
a
c
t
u
r
i
n
g

P
r
o
c
e
s
s
M
a
n
u
f
a
c
t
u
r
i
n
g

P
r
o
c
e
s
s
E.M.S
RH Vacuum
Degasser
Ladle Furnace
Leveller
On-Line Accelerated
Cooling System
Pre-Leveller
Flame Cutting
4 High
Rolling Mill
Descaling Box
Reheating Furnace
Inspection &
Measuring
Finished Product
Ultrasonic
Testing Normalizing furnace Shearing machine
Automatic Painting &
Stamping Machine
On-Line Automatic
Ultrasonic Testing
Cooling Bed
-Ray
Thickness Gauge

- 7 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3. Specification
The contents of this catalog are for reference only. Customers are urged to consult the specifications published by the
corresponding associations. Information of the available CSC steel grades as shown herein may be updated without
complying with actual production situations.

3.1 Chemical Compositions and Mechanical Properties
3.1.1 Steel Plates for General Structural Usage
3.1.1.1 JIS G3101-10 Rolled Steels for General Structure
Grade
Chemical Compositions %
Tension Test
Yield Point or Yield Strength (N/mm
2
)
Tensile
Strength
N/mm
2

Elongation
C Mn P S
Thickness (t) mm Thickness
(t) mm
Test
Piece
%
min t16 16t40 40t100 t100
SS330

0.050
max
0.050
max
205
min
195
min
175
min
165
min
330-430
6t16 No.1A 21
16t50 No.1A 26
40t No.4 28
SS400
245
min
235
min
215
min
205
min
400-510
6t16 No.1A 17
16t50 No.1A 21
40t No.4 23
SS490
285
min
275
min
255
min
245
min
490-610
6t16 No.1A 15
16t50 No.1A 19
40t No.4 21
SS540
0.30
max
1.60
max
0.040
max
0.040
max
400
min
390
min
540 min
6t16 No.1A 13
16t40 No.1A 17
Remark1. Alloy elements other than those shown in the above table may be added necessary.
2. For the elongation of No.4 test piece for steel plates over 90mm in thickness, it shall be subtracted 1% from the
values of elongation per each increase of 25.0mm or its fraction in thickness. However, the limit to be subtracted
shall be 3%.
3.1.1.2 JIS G3106-08 Rolled Steels for Welded Structure
Grade
Thickness
(t) mm
Chemical Compositions %
Tension Test Impact Test
Yield Point or Yield Strength (N/mm)
Tensile
Strength
N/mm
Elongation
Test
Temp

Charpy
Absorbed
Energy
Average
J
T
e
s
t

p
i
e
c
e

C Si Mn P S
Thickness (t) mm
Thickness
(t) mm
Test
Piece
%
min t16
16t
40
40t
75
75t
100
100t
160
SM400A
t50
0.23
max

2.5C
max
0.035
max
0.035
max
245
min
235
min
215
min
215
min
205
min
400-510
6t16
16t50
40t
No.1A
No.1A
No.4
18
22
24

P
a
r
a
l
l
e
l

t
o

r
o
l
l
i
n
g

d
i
r
e
c
t
i
o
n

50t90
0.25
max
SM400B
t50
0.20
max 0.35
max
0.60

1.40
0 27min
50t90
0.22
max
SM400C t90
0.18
max
0.35
max
1.40
max
0 47min
SM490A
t50
0.20
max 0.55
max
1.65
max
0.035
max
0.035
max
325
min
315
min
295
min
295
min
285
min
490-610
6t16
16t50
40t
No.1A
No.1A
No.4
17
21
23

50t90
0.22
max
SM490B
t50
0.18
max 0.55
max
1.65
max
0 27 min
50t90
0.20
max
SM490C t100
0.18
max
0.55
max
1.65
max
0 47 min
SM490YA
t90
0.20
max
0.55
max
1.65
max
0.035
max
0.035
max
365
min
355
min
335
min
325
min
490-610
6t16
16t50
40t
No.1A
No.1A
No.4
15
19
21

SM490YB 0 27 min
SM520B
t90
0.20
max
0.55
max
1.65
max
0.035
max
0.035
max
365
min
355
min
335
min
325
min
520-640
6t16
16t50
40t
No.1A
No.1A
No.4
15
19
21
0 27 min
SM520C 0 47 min
SM570 t80
0.18
max
0.55
max
1.70
max
0.035
max
0.035
max
460
min
450
min
430
min
420
min
570-720
6t16
16t
20t
No.5
No.5
No.4
19
26
20
-5 47 min
Remarks1. Alloy elements other than those shown in the above table may be added necessary.
2. Impact test is applicable to thickness over 12.0mm of steel.

- 8 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.1.3 ASTM A36-08 Carbon Structural Steel
Chemical Compositions % Tension Test
Thickness
(t) mm
C Si Mn P S
Yield Point
ksi
(N/mm)
Tensile
Strength
ksi
(N/mm)
Elongation
Test
Piece
in(mm)

min
t19.05
0.25
max
0.40
max

0.040
max
0.050
max
36(250)
min
58-80
(400-550)
GL8(200)
GL2(50)
20
23
19.05t38.10
0.25
max
0.80

1.20
38.10t63.50
0.26
max
0.15

0.40
63.50t101.60
0.27
max
0.85

1.20
t101.60
0.29
max
Remarks1. When copper steel is specified, minimum Cu shall be 0.20%.
2. For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese
above the specified maximum will be permitted up to the maximum of 1.35%.
3. For plates wider than 24 in.(600mm), the elongation requirement is reduced two percentage points.
4. For nominal thickness under 5/16 in.(8mm), the deduction from the specified percentage of elongation in
8 in.(200mm) shall be made for decreases of the nominal thickness below 5/16 in.(8mm). See elongation
requirement adjustments under the Tension Tests Section of Specification A6 for deduction values.

3.1.1.4 ASTM A283-03 Low and Intermediate Tensile Strength Carbon Steel Plates
Grade
Chemical Compositions % Tension Test
C
Si
Mn P S
Yield
Point
ksi(N/mm)
Tensile Strength
ksi(N/mm)
Elongation
Thickness(t)mm
t38.10 t38.10
Test Piece
in(mm)
%
min
Grade A
0.14
max
0.40
max
0.15

0.40
0.90
max
0.035
max
0.040
max
24(165)
min
45-60
(310-415)
GL8(200)
GL2(50)
27
30
Grade B
0.17
max
27(185)
min
50-65
(345-450)
GL8(200)
GL2(50)
25
28
Grade C
0.24
max
30(205)
min
55-75
(380-515)
GL8(200)
GL2(50)
22
25
Grade D
0.27
max
33(230)
min
60-80
(415-550)
GL8(200)
GL2(50)
20
23
Remarks1. When copper steel is specified, minimum Cu shall be 0.20%.
2. For plates wider than 24 in.(600mm), the elongation requirement is reduced two percentage points.
3. For nominal thickness under 5/16 in.(8mm), the deduction from the specified percentage of elongation in
8 in.(200mm) shall be made for decreases of the nominal thickness below 5/16 in.(8mm). See elongation
requirement adjustments under the Tension Tests section of Specification A6 for deduction values.

- 9 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.1.5 ASTM A572-07 High-Strength Low-Alloy Columbium-Vanadium Structural Steel
Grade
Thickness(t)
mm
Chemical Compositions % Tension Test
C Si Mn P S
Type 1 Type 2 Type 3
Yield Point
ksi(N/mm)
Tensile
Strength
ksi(N/mm)
Elongation
Nb V Nb V Nb+V
Test piece
in(mm)

min
Gr.42
t38.10
0.21
max
0.40
max
1.35
max
0.040
max
0.050
max
0.005

0.050
0.01

0.15
0.005

0.050
0.01

0.15
0.02

0.15
42(290)
min
60(415)
min
GL=8(200)
GL=2(50)
20
24
t38.10
0.15

0.40
Gr.50
t38.10
0.23
max
0.40
max
50(345)
min
65(450)
min
GL=8(200)
GL=2(50)
18
21
t38.10
0.15

0.40
Gr.55
t38.10
0.25
max
0.40
max
55(380)
min
70(485)
min
GL=8(200)
GL=2(50)
17
20
t38.10
0.15

0.40
Gr.60 t31.80
0.26
max
0.40
max
60(415)
min
75(520)
min
GL=8(200)
GL=2(50)
16
18
Gr.65
t12.70
0.26
max
0.40
max
1.35
max
65(450)
min
80(550)
min
GL=8(200)
GL=2(50)
15
17
t12.70
0.23
max
1.65
max
Remarks1.When copper steel is specified, minimum Cu shall be 0.20%.
2. Manganese, minimum by heat analysis of 0.80% shall be required for all plates over 3/8 in.(9.53mm) in
thickness, a minimum of 0.50% shall be required for plates 3/8 in.(9.53mm) and less in thickness, and
for all other products. The manganese to carbon ratio shall not be less than 2 to1.
3. Gr.42,50,55,60 for each reduction of 0.01% below the specified carbon maximum, an increase of 0.06%
manganese above the specified maximum is permitted, up to a maximum of 1.60%.
4. Gr.65 if the thickness is 12.70mm or under, an alternative chemical requirement with a maximum carbon
of 0.21% and a maximum manganese of 1.65% is permitted.
5. For plates wider than 24 in.(600mm), the elongation requirement is reduced two percentage points for
Grades 42,50 and 55, and three percentage points for Grades 60 and 65. See elongation requirement
adjustments in the Tension Tests section of Specification A6/A6M.

3.1.1.6 ASTM A573-05 Structural Carbon Steel Plates of Improved Toughness
Grade
Thickness
(t) mm
Chemical Compositions % Tension Test
C Si Mn P S
Yield Point
ksi(N/mm)
Tensile Strength
ksi(N/mm)
Elongation
Test piece
in(mm)
%
min
Grade58 t38.10 0.23 max
0.10

0.35
0.60

0.90
0.035
max
0.040
max
32(220)
min
58-71(400-490)
GL8(200)
GL2(50)
21
24
Grade65
t12.70 0.24 max
0.15

0.40
0.85

1.20
35(240)
min
65-77(450-530)
GL8(200)
GL2(50)
20
23 12.70t38.10 0.26 max
Grade70
t12.70 0.27 max 42(290)
min
70-90(485-620)
GL8(200)
GL2(50)
18
21 12.70t38.10 0.28 max
Remarks1. For plates wider than 24 in.(600mm), the elongation requirement is reduced two percentage points. See
elongation requirement adjustments in the Tension Tests Section of Specification A6/A6M.
2. The upper limit of manganese for Gr.58 may be exceeded, provided that the carbon content plus 1/6
manganese content does not exceed 0.40% based on heat analysis.
3. Gr.58,65 for each reduction of 0.01% below the specified carbon maximum, an increase of 0.06%
manganese above the specified maximum is permitted, up to a maximum of 1.50% and 1.60% for
Grades 70.

- 10 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.1.7 ASTM A709-10 Structural Steel for Bridges
Grade
Thickness
(t) mm
Chemical Compositions % Tension Test
C Si Mn P S
Type 1 Type 2 Type 3 Yield Point
or
Yield Strength
ksi(N/mm)
Tensile
Strength
ksi(N/mm)
Elongation
Nb V Nb V
Nb
+
V
Test piece
in(mm)
%
min
Grade
36
t19.05
0.25
max
0.40
max

0.040
max
0.050
max

36(250)
min
58~80
(400~550)
GL=8(200)
GL=2(50)
20
23
19.05t38.10
0.80

1.20
38.10t63.50
0.26
max 0.15

0.40
63.50t101.60
0.27
max
0.85

1.20
Grade
50
t38.10
0.23
max
0.40
max
1.35
max
0.005

0.050
0.01

0.15
0.005

0.050
0.01

0.15
0.02

0.15
50(345)
min
65(450)
min
GL=8(200)
GL=2(50)
18
21
t38.10
0.15

0.40
Grade
50W
Type
A
t101.60
0.19
max
0.30

0.65
0.80

1.25
Ni Cr Cu V
50(345)
min
70(485)
min
GL=8(200)
GL=2(50)
18
21 0.40
max
0.40

0.65
0.25

0.40
0.02

0.10

Remarks1. When copper is specified, minimum Cu shall be 0.20%.
2. For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese.
3. Manganese of Gr.50, minimum by heat analysis of 0.80% shall be required for all plates over 3/8
in.(9.53mm) in thickness, a minimum of 0.50% shall be required for plates 3/8 in.(9.53mm) and less in
thickness, and for all other products. The manganese to carbon ratio shall not be less than 2 to1.For
eachreduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above
the specified maximum is permitted, up to a maximum of 1.60%.
4. For Gr.50W Type A, the silicon content in excess of 0.40% by heat analysis must be negotiated.
5. For each reduction of 0.01% below the specified maximum for carbon, an increase of 0.06% above the
specified maximum for manganese is permitted, up to a maximum of 1.50%.
6. For plates wider than 24 in.(600mm), the elongation requirement is reduced two percentage points. See
elongation requirement adjustments in the Tension Tests section of Specification A6/A6M.
- 11 - - 12 -
S
p
e
c
i
f
i
c
a
t
i
o
n
S
p
e
c
i
f
i
c
a
t
i
o
n
Grade
Thickness
(t) mm
Chemical Composition %
Tension Test Impact Test
Yield point or Proof Stress
N/mm
Yield Ratio %
Elongation
(%) min
Through-thickness
characteristics
Test
Temp

Charpy
Absorbed
Energy
Average
J
T
e
s
t

p
i
e
c
e
No.1A No.1A No.4
Average

%
min
Individual
%
min
Thickness(t) mm Thickness(t) mm Thickness(t) mm
C Si Mn P S Ceq t12
12t
16
16t
40
40t
100
t12
12t
16
16t
40
40t
100
t16
16t
50
40t
100
SN400A
0.24
max

0.050
max
0.050
max

235
min
235
min
235
min
215
min


400

510

17 21 23


SN400B
0.20
max
0.35
max
0.60

1.50
0.030
max
0.015
max
0.36
max
235
min
235

355
235

355
215

335
80
max
80
max
80
max
18 22 24
0 27 min
N
o
.
4

i
n

r
o
l
l
i
n
g

d
i
r
e
c
t
i
o
n

0.22
max
SN400C
0.20
max
0.020
max
0.008
max
25 15
0.22
max
SN490B
0.18
max
0.55
max
1.65
max
0.030
max

0.015
max

0.44
max
325
min
325

445
325

445
295

415


490

610
80
max
17 21 23

0.46
max 0.20
max
SN490C
0.18
max
0.020
max
0.008
max
0.44
max
25 15
0.46
max 0.20
max
Remarks1. Alloy elements other than those shown in the above table may be added necessary.
2. Impact test is applicable to thickness over 12.0mm of steel.
3.CeqC+Mn/6+Si/24+Ni/40+Cr/5+Mo/4+V/14
4.Ultrasonic Test :
(1) SN400B and SN490B is over 13.00mm in thickness, which may be tested in accordance with JIS G 0901 CL.Y If agreement between purchaser and manufacturer.
(2) SN400C and SN490C is 16.00mm or over, which shall be tested in accordance with JIS G0901 CL.Y .
3.1.1.8 JIS G3136-12 Rolled Steels for Building Structure
Strength
Tensile
N/mm
6t
100
6t
40
40t
50
6 t
50
16 t
40
16 t
50
50 t
100
50 t
100
40 t
50
50 t
100
50 t
100

- 13 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.2 Shipbuilding Steel Plates
3.1.2.1 ABS2012Ordinary-Strength Hull Structural Steel
Grade
Chemical Composition %
Tension Test Impact Test
Yield
Point
N/mm
Tensile
Strength
N/mm
Elongation
Test
Temp
(
Energy
Average
J
C Si Mn P S C+Mn/6
Test
piece
mm
%
min
Parallel
to rolling
direction
Transverse
to rolling
direction
Grade A
0.21
max
0.50
max
2.5C
min
0.035
max
0.035
max
0.40
max
235
min
400

520
GL
5.65
,A
22

Grade B
0.35
max
0.80
min
0
27
min
20
min
Grade D
0.10

0.35
0.60
min
20
Grade E
0.18
max
0.70
min
40
Remarks1. When the content of soluble aluminum is not less than 0.015%, the minimum required silicon content
does not apply.
2. For Grade A, rimmed steel sections may be accepted up to and including 12.5 mm(0.5 in).
3. A maximum carbon content of 0.23% is acceptable for Grade A sections.
4. For Gr.B steel of cold flanging quality or when fully killed, the lower limit of manganese may be
reduced to 0.60%.
5. Gr.D hull steel which is normalized, thermo-mechanical control processed or control rolled is to be
marked AB/DN.
6. The contents of nickel, chromium, molybdenum and copper are to be determined and reported. When
the amount does not exceed 0.02%, these elements may be reported as0.02%.
7. For Grade A sections, the upper limit of tensile strength may be 550 N/mm
2
(56 kgf/ mm
2
80 ksi).

- 14 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.2.2 ABS(2012)Higher-Strength Hull Structural Steel
G
r
a
d
e

Chemical Composition %
Tension Test Impact Test
Yield
Point
N/mm
Tensile
Strength
N/mm
Elongation
Test
Temp
C
Energy
Average J
Thickness
(t) mm
C Si Mn P S Cu Cr Ni Mo Nb V Ti Al
Test
piece
mm
%
min
Parallel to
rolling
direction
Transverse to
rolling
direction
A
H
3
2

0.18
max
0.10

0.50
0.90

1.60
0.035
max
0.035
max
0.35
max
0.20
max
0.40
max
0.08
max
0.02

0.05
0.05

0.10
0.020
max
0.020
min
315
min
440

590
GL
5.65
A
22
0
50.00
31min

50.01~70.00
38 min

70.01~75.00
46 min

50.00
22 min

50.01~70.00
26 min

70.01~75.00
31 min

D
H
3
2

-20
E
H
3
2

-40
A
H
3
6

355
min
490

620
GL
5.65
A
21

0
50.00
34 min

50.01~70.00
41 min

70.01~75.00
50 min

50.00
24min

50.01~70.0 0
27 min

70.01~75.00
34 min

D
H
3
6

-20
E
H
3
6

-40
E
H
4
0

390
min
510

650
20 -40

50.00
39 min

50.01~70.00
46min

70.01~75.00
55 min


50.00
26 min

50.01~70.00
31 min

70.01~75.00
37 min

E
H
4
7

0.10
max
0.10

0.55
1.60
max
0.030
max
0.030
max
0.35
max
0.20
max
1.50
max
0.08
max
0.05
max
0.10
max
0.007

0.020
0.020
min
460
min
570

720
17 -40
50.00~65.00
64 min

50.00~65.00
45min

Remarks1. AH steel 12.5mm(0.50 in.) and under in thickness may have a minimum manganese content of 0.70%.
2. When the content of soluble aluminum is not less than 0.015%, the minimum required silicon content
does not apply.

- 15 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.3 Steel Plates for boilers and Pressure Vessels
3.1.3.1 JIS G3103-12 Carbon Steel and Molybdenum Alloy Steel Plate for Boilers and Other
Pressure Vessels
Grade
Thickness
(t) mm
Chemical Composition % Tensile Test Bend Test
C Si Mn P S Mo
Yield point
N/mm
Tensile Strength
N/mm
Elongation
%, min
Test
Piece
Bend
Angle
Thickness
(t) mm
Inside
Radius
Test
Piece
SB410
t25
0.24
max
0.15

0.40
0.90
max
0.020
max
0.020
max

225
min
410

550
21 No.1A
180

t25
25t50
50t100
100t200

0.50t
0.75t
1.00t
1.25t

T
r
a
n
s
v
e
r
s
e

t
o

r
o
l
l
i
n
g

d
i
r
e
c
t
i
o
n

25t50
0.27
max
25 No.10
50t100
0.29
max
SB450
t25
0.28
max
245
min
450

590
19 No.1A

t25
25t100
100t200

0.75t
1.00t
1.25t
25t50
0.31
max
23 No.10
50t100
0.33
max
SB480
t25
0.31
max
1.20
max
265
min
480

620
17 No.1A t25
25t50
50t100
100t200
1.00t
1.00t
1.25t
1.50t
25t50
0.33
max
21 No.10
50t100
0.35
max
SB450M
t25
0.18
max
0.90
max
0.45

0.60
255
min
450

590
19 No.1A


t25
25t100
100t150


0.50t
0.75t
1.00t
25t50
0.21
max
50t100
0.23
max
23 No.10
100t150
0.25
max
SB480M
t25
0.20
max
275
min
480

620
17 No.1A


t25
25t100
100t150


0.50t
0.75t
1.00t
25t50
0.23
max
50t100
0.25
max
21 No.10
100t150
0.27
max
Remarks1. For SB450 of over 25mmin thickness, the content of C may be designated to be within 0.30%, and that of Mn may be within 1.00%.
2. For tension test pieces, No.1A test piece shall be used for the steel plates of 50mmor under in thickness and No.10 test piece for that
over 50mm. However, for the steel plates over 40mmin thickness, No.10 test piece may be used.
3. The elongation of No.1A test piece cut off fromthe steel plate under 8mmin thickness shall be the values in the above Table
reduced by 1% for every decrease of 1mmof thickness or its fraction.
4. The elongation of No.10 test piece cut off fromthe steel plate over 90mmin thickness shall be the values in the above Table reduced
by 0.5% for every increase of 12.5mmof thickness or its fraction. However, the reduction shall be limited to 3%.
5. When the elongation of No.1A test piece cut off fromSB450M and SB480M steel plates of over 6 mmto and excluding 20 mm
in thickness is more than the value specified in the above Table subtracted by 3, the test piece shall be accepted despite the
above specification provided that the value of elongation in the gage length of 50 mmincluding the broken part is 25% or over.
3.1.3.2 ASTM A285-03 Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
Grade
Chemical Composition % Tensile Test
C Mn P S
Yield Strength
ksi(N/mm)
Tensile Strength
ksi(N/mm)
Elongation
Test piece in(mm)
Grade A 0.17max
0.90
max
0.035
max
0.035
max
24(165) min 45~65(310~450)
GL=8(200)
GL=2(50)
27 min
30 min
Grade B 0.22 max 27(185) min 50~70(345~485)
GL=8(200)
GL=2(50)
25 min
28 min
Grade C 0.28 max 30(205) min 55~75(380~515)
GL=8(200)
GL=2(50)
23 min
27 min
RemarkWhen the thickness less than 5/16 in(8mm), See Specification A20/A20M for elongation adjustment.

- 16 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.3.3 JIS G3115-10 Steel Plates for Pressure Vessels for Intermediate Temperature Service
Grade
Chemical Composition %
Tensile Test
Bend Test
Impact Test
Yield point or
proof stress
N/mm
Tensile
Strength
N/mm
Elongation
T
e
s
t

p
i
e
c
e

Charpy
Absorbed
Energy J
T
e
s
t

p
i
e
c
e
C Si Mn P S
Ce
q
Thickness (t)
mm
Thickness
(t) mm
Test
piece
%
min
Bend
Angle
Thickness
(t) mm
Inside
Radius
Test
piece
t50
50t
100
Average Individual
SPV235
t100
0.18
max 0.35
max
1.40
max
0.03
0
max
0.03
0
max

235
min
215
min
400
510
t16
t16
t40
No.1A
No.1A
No.4
17
21
24
180
t50
t50
1.0t
1.5t
N
o
.
1

t
r
a
n
s
v
e
r
s
e

t
o

r
o
l
l
i
n
g

d
i
r
e
c
t
i
o
n

0
47min 27min
V
-
n
o
t
c
h
,

p
a
r
a
l
l
e
l

t
o

r
o
l
l
i
n
g

d
i
r
e
c
t
i
o
n

t100
0.20
max
SPV315 0.18 max
0.55
max
1.60
max
315
min
295
min
490
610
t16
t16
t40
No.1A
No.1A
No.4
16
20
23
1.5t
SPV355 0.20 max
355
min
335
min
520
640
t16
t16
t40
No.1A
No.1A
No.4
14
18
21
SPV410 0.18 max
0.75
max
410
min
390
min
550
670
t16
t16
t40
No.1A
No.1A
No.4
12
16
18
-10
Remarks1. Alloy elements other than those shown in the above table may be added if necessary.
2. Ceq(%)C+Mn/6+Si/24+Ni/40+Cr/5+Mo/4+V/14.
3. Impact test is applicable to thickness over 12.0mm of steel.
3.1.3.4 ASTM A515-10 Pressure Vessel Plates, Carbon Steel, for Intermediate - and
High-Temperature Service
Grade
Thickness
(t) mm
Chemical Composition % Tensile Test
C Si Mn P S
Yield strength
ksi(N/mm)
Tensile
strength
ksi(N/mm)
Elongation
Test piece
in(mm)
%
Grade 60
t25.40
0.24
max
0.15

0.40
0.90
max
0.025
max
0.025
max
32 (220)
min
60~80
(415~550)
GL8(200)
GL2(50)
21 min
25 min
25.40t50.80
0.27
max
50.80t101.60
0.29
max
Grade 65
t25.40
0.28
max
35 (240)
min
65~85
(450~585)
GL8(200)
GL2(50)
19 min
23 min
25.40t50.80
0.31
max
50.80t101.60
0.33
max
Grade 70
t25.40
0.31
max
1.20
max
38 (260)
min
70~90
(485~620)
GL8(200)
GL2(50)
17 min
21 min
25.40t50.80
0.33
max
50.80t101.60
0.35
max
Remark1. When the thickness less than 5/16 in(8mm), See Specification A20/A20M for elongation adjustment.
2. For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above
the specified maximum is permitted, up to a maximum of 1.50%.

- 17 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.3.5 ASTM A516-10 Pressure Vessel Plates, Carbon Steel, for Moderate-and Lower-Temperature
Service
Grade
Thickness
(t) mm
Chemical Composition % Tensile Test
C Si Mn P S
Yield
strength
ksi(N/mm)
Tensile strength
ksi(N/mm)
Elongation
Test piece
in(mm)
%
Grade
55
t12.70
0.18
max
0.15

0.40
0.60

0.90
0.025
max
0.025
max
30 (205)
min
55~75
(380~515)
GL8(200)
GL2(50)
23 min
27 min 12.70t50.80
0.20
max
0.60

1.20 50.80t101.60
0.22
max
Grade
60
t12.70
0.21
max
0.60

0.90
32 (220)
min
60~80
(415~550)
GL8(200)
GL2(50)
21 min
25 min 12.70t50.80
0.23
max
0.85

1.20 50.80t101.60
0.25
max
Grade
65
t12.70
0.24
max
0.85

1.20
35 (240)
min
65~85
(450~585)
GL8(200)
GL2(50)
19 min
23 min
12.70t50.80
0.26
max
50.80t101.60
0.28
max
Grade
70
t12.70
0.27
max
38 (260)
min
70~90
(485~620)
GL8(200)
GL2(50)
17 min
21 min
12.70t50.80
0.28
max
50.80t101.60
0.30
max
Remarks1. For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese
above the specified maximum is permitted, up to a maximum of 1.50%.
2. Grade 60 plates 1/2 in.(12.7mm) and under in thickness may have 0.85~1.20% manganese on heat
analysis, and 0.79~1.30% manganese on product analysis.
3. When the thickness less than 5/16 in(8mm), see specification A20/A20M for elongation adjustment.
4. When the thickness is over 1 in.(38.1mm) and shall be normalized.

3.1.3.6 ASTM A537-08 Pressure Vessel Plates, Heat-treated, Carbon-Manganese-Silicon Steel
Grade
Thickness
(t) mm
Chemical Composition %
Tensile Test
Yield
strength
ksi(N/mm)
Tensile
strength
ksi(N/mm)
Elongation
C Si Mn P S Cu Ni Cr Mo
Test piece
in(mm)
%
min
Class 1
6.00t38.10
0.24
max
0.15

0.50
0.70

1.35 0.035
max
0.035
max
0.35
max
0.25
max
0.25
max
0.08
max
50(345)
min
70~90
(485~620)
GL=8(200)
GL=2(50)
18
22
38.10t50.80
1.00

1.60
Remarks1. When the thickness 1 in.(38.1mm) and under, manganese may exceed 1.35%, up to a maximum of
1.60%, and nickel may exceed 0.25%, up to a maximum of 0.50%, provided the heat analysis carbon
equivalent does not exceed 0.57% when based upon the following equation:
CE=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15
2. When the thickness less than 5/16 in(8mm), see specification A20/A20M for elongation adjustment.
3. Class 1(All thickness) plates shall be normalized.

- 18 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.4 Steel Plates for Machine Structural Usage
J IS G405109 SAE (2009)
Chemical Composition % Chemical Composition %
Grade C Si Mn P S Grade C Si Mn P S

0.15-0.35

0.030
max
0.030
max
1005 0.06 max

0.35 max
0.030
max
0.050
max
1006 0.08 max 0.45 max
1008 0.10 max 0.50 max
1009 0.15 max 0.60 max
S10C 0.080.13 0.300.60 1010 0.080.13
0.300.60
S12C 0.100.15 0.300.60 1012 0.100.15
1013 0.110.16
S15C 0.130.18 0.300.60 1015
0.130.18
1016 0.600.90
S17C 0.150.20 0.300.60 1017
0.150.20
0.300.60
1018 0.600.90
1019 0.701.00
S20C 0.180.23 0.300.60 1020
0.180.23
0.300.60
1021 0.600.90
S22C 0.200.25 0.300.60 1022 0.701.00
1023 0.200.25 0.300.60
S25C 0.220.28 0.300.60 1025
0.220.28
0.300.60
1026 0.600.90
S28C 0.250.31 0.600.90
1029 0.250.31 0.600.90
S30C 0.270.33 0.600.90 1030 0.280.34 0.600.90
S33C 0.300.36 0.600.90 1033 0.300.36 0.701.00
S35C 0.320.38 0.600.90 1035
0.320.38
0.600.90
1037 0.701.00
S38C 0.350.41 0.600.90 1038 0.350.42 0.600.90
1039
0.370.44
0.701.00
S40C 0.370.43 0.600.90 1040 0.600.90
1042
0.400.47
0.600.90
S43C 0.400.46 0.600.90 1043 0.701.00
1044
0.430.50
0.300.60
S45C 0.420.48 0.600.90 1045 0.600.90
1046 0.701.00
S48C 0.450.51 0.600.90
1049 0.460.53 0.600.90
S50C 0.470.53 0.600.90 1050
0.480.55
0.600.90
S53C 0.500.56 0.600.90 1053 0.701.00
S55C 0.520.58 0.600.90 1055 0.500.60 0.600.90
S58C 0.550.61 0.600.90
1060 0.550.65 0.600.90

1330 0.280.33
0.15-0.35
1.601.80
0.030
max
0.040
max
1335 0.330.38
1.601.90 1340 0.380.43
1345 0.430.48
Remarks 1. Cr shall not be over 0.20%. However, it may be specified as values under 0.30% upon the agreement
between the manufacturer and the purchaser .
2. For grades 1006 and 1008 applicable to structural plates, strip or sheet, the manganese limit is
0.45% and 0.50% maximum, respectively, with no minimum.

- 19 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.5 Atmospheric Corrosion Resistant Steel Plates
3.1.5.1 CSC-specification
Grade
Thickness
(t) mm
Chemical Composition % Tensile Test Bend Test
Application
C Si Mn P S Cu Ni Cr Ti
Yield
Point
N/mm
Tensile
Strength
N/mm
Elongation
%
Test
piece
Bend
Angle
Inside
Radius
Test
piece
SCR
TEN2
6.00t
20.00
0.14
max
0.15

0.55
0.90
max
0.025
max
0.035
max
0.20

0.50
0.50
max
0.50

1.00
0.15
max
325
min
440
min
18
min
No.1A
180 1.5t No.1
Plate for Sulfur
Dew-Point
Corrosion-
Resistance
SCR
TEN3
0.035
max
0.035
max
0.25

0.50

0.80

1.30
Sb
22
min
No.5
0.15
max
GP1
6.00t
50.80
0.07
max
0.02
max
0.35
max
0.020
max
0.020
max

Plate for
Galvanizing Pot
GP2
0.15

0.25
0.03
max
0.90
max
0.012
max

3.1.5.2 JIS G3114-08 Hot-Rolled Atmospheric Corrosion Resisting Steels for Welded Structure
Grade
Chemical Composition %
Tensile Test Impact Test
Yield Point or
Proof Stress
N/mm
Tensile
Strength
N/mm
Elongation
S
y
m
b
o
l

T
e
s
t

t
e
m
p

Charpy
Absorbed
Energy
Average
J
T
e
s
t

p
i
e
c
e
C Si Mn P S Cu Cr Ni
Thickness (t) mm
Thickness
(t) mm
Test
piece
%
min t16
16t
40
40t
75
SMA400
A.B.C.
W
0.18
max
0.15

0.65
1.25
max
0.035
max
0.035
max
0.30

0.50
0.45

0.75
0.05

0.30
245
min
235
min
215
min
400

540
t16
t16
t40
No.1A
No.1A
No.4
17
21
23
A
V
-
N
o
t
c
h

i
n

r
o
l
l
i
n
g

d
i
r
e
c
t
i
o
n

B 0 27 min
P
0.55
max
0.20

0.35
0.30

0.55
C 0 47 min
SMA490
A.B.C.
W
0.15

0.65
1.40
max
0.30

0.50
0.45

0.75
0.05

0.30 365
min
355
min
335
min
490

610
t16
t16
t40
No.1A
No.1A
No.4
15
19
21
A
B 0 27 min
P
0.55
max
0.20

0.35
0.30

0.55
C 0 47 min
SMA570
W
0.15

0.65
0.30

0.50
0.45

0.75
0.05

0.30
460
min
450
min
430
min
570

720
t16
t16
t20
No.5
No.5
No.4
19
26
20
-5 47 min
P
0.55
max
0.20

0.35
0.30

0.55

Remarks 1. The letter symbol W denotes that the plates are usually used in the delivered condition or
chemically treated against rusting, while P denotes that they are usually used after coated.
2 .The elements effective for the atmospheric corrosion resistance, such as Mo,Nb,Ti,V and Zr may
be added to any grade of plates, provided that the total content of these elements does not exceed
0.15%.
3. Pertaining to the charpy absorbed energy, the value higher than those shown in the above table may
be agreed upon by the parties concerned.
4. Impact test is applied only to the plates exceeding 12.0mm in thickness.

- 20 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.5.3 ASTM A242-04 High-Strength Low-alloy Structural Steel
Grade
Chemical Composition % Tensile Test
C Mn P S Cu
Thickness
(t)mm
Yield point
ksi(N/mm)
Tensile
strength
ksi (N/mm)
Elongation
Test piece
in(mm)
%
min
Type 1
0.15
max
1.00
max
0.150
max
0.005
max
0.20
min
t19.05
50(345)
min
70(480)
min
GL=8(200)
GL=2(50)
18
21
19.05t38.10
46(315)
min
67(460)
min
38.10t101.60
42(290)
min
63(435)
min
Remarks: 1. For plates wider than 24 in.(600mm), the elongation requirement is reduced two percentage points.
2. For nominal thickness under 5/16 in.(8mm), the deduction from the specified percentage of
elongation in 8 in.(200mm) shall be made for decreases of the nominal thickness below 5/16
in.(8mm). See elongation requirement adjustments under the Tension Tests Section of Specification
A6 for deduction values.

3.1.5.4 ASTM A588-10 HSLA Structural Steel up to 50 ksi min Yield Point, Atmospheric Corrosion
Resistance
Grade
Chemical Composition % Tensile Test
C Si Mn P S Cu Ni Cr Mo V Nb
Yield point
ksi(N/mm)
Tensile
strength
ksi (N/mm)
Elongation
Test piece
in(mm)
%
min
Grade
A
0.19
max
0.30

0.65
0.80

1.25
0.040
max
0.050
max
0.25

0.40
0.40
max
0.40

0.65

0.02

0.10

50 (345)
min
70 (485)
min
GL=8(200)
GL=2(50)
18
21
Grade
B
0.20
max
0.15

0.50
0.75

1.35
0.20

0.40
0.50
max
0.40

0.70
0.01

0.10
Grade
K
0.17
max
0.25

0.50
0.50

1.20
0.30

0.50
0.40
max
0.40

0.70
0.10
max

0.005

0.050
Remarks 1. For each reduction of 0.01% below the specified maximum for carbon, an increase of 0.06% above
the specified maximum for manganese is permitted, up to a maximum of 1.50%.
2. Gr.K for plates under 1/2 in.(12.70mm) in thickness, the minimum columbium is waived.
3. For plates wider than 24 in.(600mm), the elongation requirement is reduced two percentage points.
4. When the thickness less than 5/16 in(8mm), See Specification A6/A6M for elongation adjustment.

- 21 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.6 Steel Plates for API 5L-2007 (ISO 3183) Line Pipe Usage
Level Grade
Chemical Composition % Tensile Test
C
max
Mn
max
P
max
S
max
Si
max
Nb
max
V
max
Ti
max

Ni+V+Ti
max
CEiw
max
(Re7)
CEpm
max
(Re8)
Yield
Strength
ksi(N/mm)
Tensile
Strength
ksi(N/mm)
PSL 1
A 0.22 0.90
0.030 0.030


30.5(210)
min
48.6(335)
min
B
(Re5)
0.26
1.20
0.15
35.5(245)
min
60.2(415)
min
X42 1.30
42.1(290)
min
60.2(415)
min
X46
1.40
46.4(320)
min
63.1(435)
min
X52
52.2(360)
min
66.7(460)
min
X56
56.6(390)
min
71.1(490)
min
X60
(Re6)
60.2(415)
min
75.4(520)
min
X65 1.45
65.3(450)
min
77.6(535)
min
X70 1.65
70.3(485)
min
82.7(570)
min
PSL 2
BM
0.22
1.20
0.025 0.015 0.45
0.050 0.050 0.040
0.43 0.25
35.5~65.3
(245~450)
60.2~110.2
(415~760)
X42M
1.30
42.1~71.8
(290~495)
60.2~110.2
(415~760)
X46M
46.4~76.1
(320~525)
63.1~110.2
(435~760)
X52M
1.40

0.15
52.2~76.9
(360~530)
66.7~110.2
(460~760)
X56M
56.6~79.0
(390~545)
71.1~110.2
(490~760)
X60M
0.12
1.60
(Re6)
60.2~81.9
(415~565)
75.4~110.2
(520~760)
X65M
65.3~87.0
(450~600)
77.6~110.2
(535~760)
X70M 1.70
70.3~92.1
(485~635)
82.7~110.2
(570~760)
Remarks1. Gr.A through Gr.X70 for each reduction of 0.01% below the specified maximum carbon content, an
increase of 0.05% above the specified maximum manganese content is permissible, but:
X42~X52Maximum manganese content is applicable to 1.50%.
X56~X65Maximum manganese content is applicable to 1.65%.
X70Maximum manganese content is applicable to 2.00%.
2. Niobium, vanadium, or combinations thereof may be used at the discretion of the manufacturer.
3. The sum of the niobium, vanadium, and titanium contents shall not exceed 0.15%.
4 .Gr.60 through Gr.X70 are permissible to add other chemical compositions by agreement between
purchaser and manufacturer.
5. Elongation values are according to Specification of API 5L-2007 (ISO 3183).
6. The sum of niobium and vanadium contents shall not exceed 0.06% except for agreement
between purchaser and manufacturer.
7. Carbon Equivalent CEiiw(%)CMn/6(CrMoV)/5(NiCu)/15
8. Carbon Equivalent CEpcm(%)CSi/30Mn/20Cu/20Ni/60Cr/20Mn/15V/105B

- 22 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.7 Chemical Composition and Mechanical Property for New Products
3.1.7.1 ASTM A841-03a Gr. B Class 2 (For Use in Welded Pressure Vessels
Thickness
(t) mm
Chemical Composition % Tensile Test Impact Test
C Si Mn P S Tot-Al
Yield
Strength
ksi (N/mm)
Tensile
Strength
ksi(N/mm)
Elongation Test Temp
/
Test
direction
Charpy
Absorbed
Energy Average
J
Test piece
in(mm)
%
15.00t
38.10
0.15
max
0.15

0.50
0.70

1.35 0.030
max
0.025
max
0.020
min
60(415)
min
80~100
(550~690)
GL=2(50)
22
min
40
/
in rolling
direction
20
min
38.10t
63.50
1.00

1.60
Remarks 1. When the thickness 1 in.(38.1mm) and under, Manganese may exceed 1.35% on heat analysis, up to
a maximum of 1.60%, provided that the carbon equivalent on heat analysis does not exceed 0.47%, or
the value specified in Supplementary Requirement S77 When that requirement is invoked, when
based on the following formula: CE=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15
2. By agreement, the steel may be produced with titanium, in which case the minimum aluminum
content shall not apply. When this option is exercised, the titanium content, by heat analysis,
shall be 0.006% to 0.02%.
3. For each reduction of 0.01 percentage point below the specified maximum for carbon, an increase
of 0.06 percentage points above the specified maximum for manganese is permitted, up to a
maximum of 1.85%.

3.1.7.2 JIS G3101 SS400 (For Use in Laser Cutting of Plates
Thickness
(t) mm
Chemical Composition %
Tensile Test
Yield Point or
Yield Strength
N/mm
Tensile
Strength
N/mm
Elongation
C Mn P S Si
Thickness (t) mm
Thickness
(t) mm
Test Piece %
12t16 16t25
12t25
0.25
max
1.35
max
0.030
max
0.030
max
0.50
max
245
min
235
min
400~510
12t16
No.1A
17
min
16t25
21
min

3.1.7.3 CSC LYS100 (Low Yielding Strength Steel for Using in Building Construction of Plates
Thickness
(t) mm
Tensile Test
Yield Strength
N/mm
Tensile Strength
N/mm
Elongation
Test Piece %
6.00t20.00
70~120 200~300
J IS No.5
50
min
20.00t50.80 J IS No.4

3.1.7.4 CSC PZ30H (Die for Pressing of Plates)
Grade C Si Mn P S Ni Cr Mo
B
(ppm)
PZ30H 0.35 max 0.80 min 1.70max 0.45max

Remarks1. There is no mechanical properties requirements for die for pressing of plates.
2. This is applicable afterwards quenching and tempering process.



- 23 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.1.7.5.1 CNS 13812-12 SN490YB (Rolled steels for building structure)
Thick-
ness
(t)mm
Chemical Composition% Mechanical Propertites
C Si Mn P S Ceq
Yield
Strength
N/mm
Tensile
Strength
N/mm
Yield Ratio
%
Elongation ZRa% Impact Test
Test
piece
%
AVG/IDV
min
Temp/Test
Direction
AVG
(J oule)
6t
16
0.18
max
0.55
max
1.60
max
0.030
max
0.015
max
0.44
max
325~445 490~610
80
max
No.1A
17
min
25/15
0/
Parallel to
rolling
27
min
16t
40 21
min 40t
50 0.46
max 50t
80
No.4
23
min
3.1.7.5.2 CNS 13812-12 SN490YC (Rolled steels for building structure)
Thick-
ness
(t)mm
Chemical Composition% Mechanical Propertites
C Si Mn P S Ceq
Yield
Strength
N/mm
Tensile
Strength
N/mm
Yield Ratio
%
Elongation ZRa% Impact Test
Test
piece
%
AVG/IDV
min
Temp/Test
Direction
AVG
(J oule)
t=16
0.18
max
0.55
max
1.60
max
0.020
max
0.008
max
0.44
max
325~445 490~610
80
max
No.1A
17
min
25/15
0/
Parallel to
rolling
27
min
16t
40 21
min 40t
50 0.46
max 50t
80
No.4
23
min
RemarksCarbon Equivalent Ceq(%)C+Mn/6+Si/24+Ni/40+Cr/5+Mo/4+V/14. (This is applicable for non-
TMCP supply of condition only)
3.1.7.6 CSC PZ590T (The most excellent strength end uasage)
Thick-
ness
(t)mm
Chemical Composition% Mechanical Propertites
C Si Mn P S Ceq
YS
N/mm
TS
N/mm
Elongation ZRa% Impact Test
No.5 No.4 thickness(t)mm
Temp

AVG
( J oule)
Test
piece
thickness(t)mm 20t80
15t
20
20t
80
AVG IDV
15t
40 0.09
max
0.55
max
1.80
max
0.020
max
0.008
max
0.44
max 440
min
590~
740
20
min
20
min
25
min
15
min
-5
47
min
Parallel to
rolling 40t
80
0.47
max
Remarks 1. Carbon Equivalent Ceq(%)C+Mn/6+Si/24+Ni/40+Cr/5+Mo/4+V/14.
2. Impact test is applied only to the plates exceeding 12 mm in thickness.
3. It needs not to be performed in ZRa% test if below 20mm in thickness except for agreement between
purchaser and manufacturer.
3.1.7.7 CSC PH490TB (Fire resistant steel plates)
Thick-
ness
(t)mm
Chemical Composition% Mechanical Propertites
C Si Mn P S Ceq
YS
N/mm
TS
N/mm
Yield
Ratio
%
Elongation (No.1A) Impact Test
thickness(t)mm Temp

AVG
( J oule )
Test
piece
12t16 16t30
12t
30
0.18
max
0.55
max
1.60
max
0.030
max
0.015
max
0.44
max
325~
445
490~
610
80
max
17
min
21
min
0
27
min
Parallel
to
rolling
Remarks The product properties could be maintained by 2/3 yield strength of room temperature in 600.

- 24 -

S
p
e
c
i
f
i
c
a
t
i
o
n


3.1.7.8 CSC SM570M (Building Structure with excellent strength and weldability)
Grade
(Level)
thick-
ness
(t)mm
Chemical Composition% Mechanical Propertites
C Si Mn P S Ceq
YS
N/mm
TS
N/mm
Yield
Ratio
%
EL
%
ZRa%
-5 Impact test
(Re: 4.)
AVG IDV Position
AVG
( J oule)
Test
piece
A
13t
50
0.18
max
0.55
max
1.60
max
0.030
max
0.008
max
0.44
max
420~
540
570~
720
85
max
Re:1 t/4 47 min
V
-
n
o
t
c
h

t
e
s
t

p
i
e
c
e

i
n

r
o
l
l
i
n
g

d
i
r
e
c
t
i
o
n

B
13t
40
85
max
Re:1 t/4 47 min
40t
50
80
max
20
(Re:l.)
t/4 47 min
50t
60
25
min
15
min
t/4
t/2
47 min
27 min
C
16t
50
0.18
max
0.55
max
1.60
max
0.020
max
0.008
max
0.44
max
85
max
20
(Re:l.)
25
min
15
min
t/4 47 min
50t
80
0.46
max
t/4
t/2
47 min
27 min
C HW
(Re:2.)
16t
50
0.44
max
85
max
20
(Re:l.)
25
min
15
min
t/4 47 min
50t
80
0.46
max
t/4
t/2
47 min
27 min
Remarks 1. The individual value (IDV) of percent elongation shall be 19 min(t16mm) and 26 min(16
t20mm) separatedly if below 20mm in thickness. The E.L% is 20 min if over 20mm in thickness.
2. The grade C HW is fit to high heat input welding. The heat affected zone (HAZ) is permitted by 880
KJ /cm in input welding. The temp.5 of impact test in fusion line shall be achieved above 15
J oules in guarantee.
3. Carbon Equivalent Ceq(%)C+Mn/6+Si/24+Ni/40+Cr/5+Mo/4+V/14.
4. The L symbol of test piece represents Parallel to rolling (Longitudinal) direction of plates.

3.1.7.9 ASTM A516 HIC (The pressure vessel of Hydrogen Induced Crack resistant)
Grade Thickness(t) mm
Chemical Composition% Mechanical Propertites
C Si Mn P S Ceq
YS
N/mm
TS
N/mm
Elongation
Test piece %
GR.60
6.00t50.80
0.20
max
0.15~
0.40
0.60~
1.20
0.010
max
0.003
max
0.42
max
220
min
415~550
No.1A
21
min
50.80t58.00 No.4
25
min
GR.70 6.00t50.80
0.20
max
0.15~
0.40
0.85~
1.20
0.010
max
0.002
max
0.42
max
260
min
485~620 No.1A
17
min
Remarks 1. The guarantee of crack length ratio (CLR) shall be 15% in maximum except for agreement between
purchaser and manufacturer.
2. Carbon Equivalent Ceq(%)CMn/6(CrMoV)/5(NiCu)/15

- 25 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.2 Dimensional Tolerances
3.2.1 JIS G3193 Thickness Tolerances of Steel Plates unitmm
Width (w)

Thickness (t)
800w1600
1600w
2000
2000w
2500
2500w
3150
3150w
4000
6.00t6.30
0.50 0.60 0.60 0.75 0.75
6.30t10.0
0.55 0.65 0.65 0.80 0.80
10.0t16.0
0.55 0.65 0.65 0.80 0.80
16.0t25.0
0.65 0.75 0.75 0.95 0.95
25.0t40.0
0.70 0.80 0.80 1.00 1.00
40.0t63.0
0.80 0.95 0.95 1.10 1.10
63.0t100
0.90 1.10 1.10 1.30 1.30
100t125
1.30 1.50 1.50 1.70 1.70
Remarks 1. When required, the tolerance in the above table may be one-sided either minus or plus side,
provided that the total range of the tolerance in this case shall be equal to the total range of
the tolerance given in the above table.
2. The positions where the thickness is to be measured shall be as follows:
For as-rolled steel plates with edge untrimmed, any point inward from the line of width
predetermined to be cut.
For cut-edged steel plates, any point 15.00mm and over inward from the edge.
3. The above table does not apply to the pressure vessel plates.

3.2.2 JIS G3136(SN) Thickness Tolerances of Steel Plates unitmm
Width (w)

Thickness (t)
800w
1600
1600w2000 2000w2500 2500w3150 3150w4000
6.00t6.30 0.70 0.90 0.90 1.20 1.20
6.30t10.0 0.80 1.00 1.00 1.30 1.30
10.0t16.0 0.80 1.00 1.00 1.30 1.30
16.0t25.0 1.00 1.20 1.20 1.60 1.60
25.0t40.0 1.10 1.30 1.30 1.70 1.70
40.0t63.0 1.30 1.60 +1.60 1.90 1.90
63.0t100 1.50 1.90 1.90 2.30 2.30
100 2.30 2.70 2.70 3.10 3.10
Remarks 1. The minus side of thickness tolerance shall be 0.30mm.
2. The positions where the thickness is to be measured shall be as follows:
For as-rolled steel plates with edge untrimmed, any point inward from the line of width
predetermined to be cut.
For cut-edged steel plates, any point 15.00mm and over inward from the edge.

- 26 -

S
p
e
c
i
f
i
c
a
t
i
o
n


3.2.3 JIS G3103(SB)JIS G3115(SPV) Thickness Tolerances of Steel Plates unitmm
Width(w)
Thickness (t)
800w1600 1600w2000 2000w2500 2500w3150 3150w4000
6.00t6.30 0.75 0.95 0.95 1.25 1.25
6.30t10.0 0.85 1.05 1.05 1.35 1.35
10.0t16.0 0.85 1.05 1.05 1.35 1.35
16.0t25.0 1.05 1.25 1.25 1.65 1.65
25.0t40.0 1.15 1.35 1.35 1.75 1.75
40.0t63.0 1.35 1.65 1.65 1.95 1.95
63.0t100 1.55 1.95 1.95 2.35 2.35
RemarkThe minus side tolerance on thickness shall be 0.25mm.

3.2.4 ASTMASME Thickness Tolerances of Steel Plates unitmm
Width (w)

Thickness (t)
800
w
1219
1219
w
1524
1524
w
1829
1829
w
2134
2134
w
2438
2438
w
2743
2743
w
3048
3048
w
3353
3353
w
3658
3658
w
4267
6.00t6.35 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 1.02
6.35t7.94 0.76 0.76 0.76 0.76 0.76 0.76 0.76 1.02 1.02
7.94t9.53 0.76 0.76 0.76 0.76 0.76 0.76 0.76 1.02 1.02 1.27
9.53t11.11 0.76 0.76 0.76 0.76 0.76 0.76 1.02 1.02 1.27 1.52
11.11t12.70 0.76 0.76 0.76 0.76 0.76 0.76 1.02 1.02 1.27 1.52
12.70t15.88 0.76 0.76 0.76 0.76 0.76 0.76 1.02 1.02 1.27 1.52
15.88t19.05 0.76 0.76 0.76 0.76 0.76 1.02 1.02 1.02 1.27 1.52
19.05t25.40 0.76 0.76 0.76 0.76 1.02 1.02 1.27 1.27 1.52 1.78
25.40t50.80 1.52 1.52 1.52 1.52 1.52 1.78 2.03 2.54 2.54 2.79
50.80t76.20 2.29 2.29 2.29 2.54 2.54 2.79 3.05 3.30 3.56 3.81
76.20t101.60 2.79 2.79 2.79 2.79 2.79 3.30 3.56 3.56 3.56 3.81
101.60t125.0 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 5.08
Remarks 1. The minus side tolerance on thickness shall be 0.25mm.
2. Thickness shall be measured at 9.53 to 19.05mm from the longitudinal edge.
3. For thickness measured at any location other than that specified in note 2, the permissible maximum
over tolerance shall be increased by 75%.

- 27 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.2.5 ABS Thickness Tolerances of Steel Plates unitmm
Norminal Thickness Thickness Tolerance
6.00~75.00 According to ISO 7452 Class C rules

3.2.6 JIS G3193 Width Tolerances of Steel Plates unitmm
Width
(w)
Thickness
(t)
Tolerance
Mill Edge
Cut Edge
(By Ordinary Cutting)
Lower Upper Lower Upper
800w1000
6.00t20.0
0
Not
specified
0
10
t20.0 15
1000w1250
6.00t20.0
15
t20.0
1250w1600
6.00t20.0
t20.0
w1600
6.00t20.0
1.2%
t20.0

3.2.7 JIS G3193 Length Tolerances of Steel Plates unitmm
Length
(L)
Tolerance
Cut Edge
(By Ordinary Cutting)
Lower Upper
L6300 0 25
L6300 0 0.5%


- 28 -

S
p
e
c
i
f
i
c
a
t
i
o
n


3.2.8 ASTM Length & Width Tolerances of Sheared Plates unitmm
Specified Dimensions Upper Limit of Tolerance on Length & Width for Thickness (t)
Length
(L)
Width
(w)
t9.53 9.53t15.87 15.88t25.39 25.40t50.80
Width Length Width Length Width Length Width Length
L3048
w1524
1524w2133
2133w2743
W2743
9
11
13
16
13
16
19
22
11
13
16
19
16
17
22
25
13
16
19
22
19
22
25
28
16
19
25
28
25
25
28
32
3048L6096
w1524
1524w<2133
2133w<2743
W2743
9
13
14
16
19
19
22
25
13
16
17
19
22
22
24
28
16
19
20
22
25
25
28
32
19
22
25
28
28
32
35
35
6096L9144
w1524
1524w2133
2133w2743
W2743
9
13
14
17
25
25
25
28
13
16
17
22
28
28
28
32
16
19
22
25
32
32
35
35
19
22
25
32
38
38
38
44
9144L12192
w1524
1524w2133
2133w2743
w2743
11
13
14
19
28
32
32
35
13
16
19
22
32
35
35
38
16
19
22
25
35
38
38
41
19
22
25
32
41
41
47
47
12192L15240
w1524
1524w2133
2133w2743
w2743
11
13
16
19
32
35
35
38
13
16
19
22
38
38
38
41
16
19
22
25
41
41
41
44
19
22
25
32
47
47
47
47
15240L18288
w1524
1524w2133
2133w2743
w2743
13
16
16
22
44
44
44
44
16
19
19
25
47
47
47
51
19
22
22
28
47
47
47
57
22
25
28
32
57
57
57
63
L18288
w1524
1524w2133
2133w2743
w2743
14
19
19
25
51
51
51
51
19
22
22
28
54
54
54
60
22
25
25
32
57
57
57
63
25
28
32
35
70
70
70
76
RemarkThe lower limit tolerance on specified length and width is 6mm.

- 29 -

S
p
e
c
i
f
i
c
a
t
i
o
n


3.2.9 ASTM Width & Length Tolerances of Steel Plates
(When Gas Cutting is Specified or Required) unitmm
Specified Thickness (t)
Tolerance on Width and length
(Applies to Carbon Steel)
Tolerance on Width and length
(Applies to Alloy Steel)
t50.80
13
0
19
0
50.80t101.60
16
0
25
0
101.60t125.00
19
0
28
0


3.2.10 JIS G3193 Flatness Tolerances of Steel Plates unitmm
Width(w)
Thickness (t)
800w1250 1250w1600
1600w
2000
2000w3000 w3000
6.00t10.0 13 13 13 21 22
10.0t25.0 12 12 12 16 17
25.0t40.0 9 9 9 13 14
40.0t63.0 8 8 8 11 11
t63.0 7 7 7 10 10
Remarks 1.The above table applies to 4m in length at any place of steel plate, and for steel plate less than 4m in
length,to the full length.
2. For the steel plate whose minimum tensile strength is specified to be 570N/mm
2
and over, or
whose minimum yield strength 430N/mm
2
and over, the maximum value of flatness specified in
the above table shall be altered to one and half times the given values, unless otherwise specified.
3. This table shall not be applied to the as-rolled steel plate with untrimmed edge.
4. Measurement of flatness, as a rule, shall be made on a flat surface plate.

- 30 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.2.11 ASTM Flatness Tolerances of Steel Plates(Applies to Carbon Steel Only) unitmm
Specified
Thickness
(t)
Permitted Variations From a Flat Surface for Specified Width (w)
w914
914
w
1219
1219
w
1524
1524
w
1829
1829
w
2134
2134
w
2438
2438
w
2743
2743
w
3048
3048
w
3658
3658
w
4267
w4267
t6.35 14 19 24 32 35 38 41 44 47
6.35t9.53 13 16 19 24 28 32 35 38 41
9.53t12.70 13 14 16 16 19 22 25 28 32 47 54
12.70t19.05 11 13 14 16 16 19 25 25 28 38 50
19.05t25.40 11 13 14 16 16 16 19 22 25 35 44
25.40t50.80 9 13 13 14 14 16 16 16 17 28 38
50.80t101.60 8 9 11 13 13 13 13 14 16 22 28
101.60t125.00 9 11 13 13 14 14 16 19 22 22 25
Remarks 1.The above table applies to flatness variations for length and width.
2.The flatness variations across the width shall not exceed the tabular amount for the specified width.
3.The permissible variations in flatness along the length shall not exceed the tabular amount for the
specified width in plates up to 3.6m in length, or in any 3.6m of longer plates.
4.When the longer dimension is under 914mm the permissible variation shall not exceed 6mm.When
the longer dimension ranges from 914mm to 1829mm incl. the permissible variation shall not exceed
75% of the tabular amount for the specified width, but in no case less than 6mm.
5.These variations apply to plates which have a specified min. tensile strength not more than
60ksi(414N/mm2). The limits in the table are increased 50% for plates specified to a higher min.
tensile strength.

- 31 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.2.12 ASTM Flatness Tolerances of High-Strength Low-Alloy and Alloy Steel Plates unit:mm
Specified
Thickness(t)
Flatness Tolerances for Specified Widths(w)
w
914
914
w
1219
1219
w
1524
1524
w
1829
1829
w
2134
2134
w
2438
2438
w
2743
2743
w
3048
3048
w
3658
3658
w
4267
w
4267
t6.35 20 28 35 47 51 57 60 66 70
6.35t9.53 19 24 28 35 44 47 51 57 60
9.53t12.70 19 22 24 24 28 33 38 41 47 70 79
12.70t19.05 16 19 20 22 25 28 32 35 41 57 76
19.05t25.40 16 19 22 22 24 25 28 33 38 51 66
25.40t50.80 14 16 19 20 22 24 25 25 25 41 57
50.80t101.60 13 14 17 19 19 19 19 22 25 32 41
101.60t125.00 14 17 19 19 22 22 24 28 32 32 38
Remarks 1. The above table applies to flatness variations for length and width.
2. The flatness variations across the width shall not exceed the tabular amount for the specified width.
3. The permissible variations in flatness along the length shall not exceed the tabular amount for the
specified width in plates up to 3.6m in length, or in any 3.6m of longer plates.
4. When the longer dimension is under 914mmthe variation shall not exceed 9.5mm. When the longer
dimension ranges from 914mm to 1829mm incl. the variation shall not exceed 75% of the tabular
amount for the specified width.

3.2.13 JISASTM Lateral Warpage Tolerance of Steel Plates unitmm

Length (L)
Width (W)
J IS ASTM
2500L4000 4000L6300
6300L
10000
L10000
Not
Specified
630W1000 6 10 16
16 for 10000 of
length at any place

W1000 5 8 12
12 for 10000 of
length at any place
Not Specified 2Length(m)
RemarkThe above table applies to shear-cut and flame-cut plates.

- 32 -

S
p
e
c
i
f
i
c
a
t
i
o
n

3.2.14 ASTM Permissible Variation in Waviness Tolerances for Plates unitmm
Tolerances
from 3.2.11
or 3.2.12
Waviness Tolerances (Number of Waves/per 3600mm)
1 2 3 4 5 6 7
8 8 6 5 3 3 2 2
9 9 8 5 5 3 2 2
11 11 8 6 5 3 3 2
13 13 9 8 5 5 3 2
14 14 11 8 6 5 3 2
16 16 13 9 6 5 3 2
17 17 13 9 8 5 5 2
19 19 14 11 8 6 5 2
21 21 16 11 8 6 5 2
22 22 17 13 9 6 5 2
24 24 17 13 9 8 6 5
25 25 19 14 11 8 6 5
29 29 22 16 13 9 8 6
32 32 24 17 13 9 8 6
35 35 27 19 14 11 8 6
38 38 29 22 16 13 9 6
41 41 32 24 17 13 9 8
44 44 33 25 19 14 11 8
48 48 37 27 21 14 11 8
51 51 38 29 22 16 13 9
54 54 41 30 22 17 13 9
57 57 43 32 24 17 14 9
60 60 46 33 25 19 14 11
63 63 48 37 27 21 14 11
67 67 51 38 29 21 16 11
70 70 52 40 29 22 16 13
73 73 56 41 30 24 17 13
76 76 57 43 32 24 17 14
79 79 60 44 33 25 19 14
Remark: The waviness tolerance is a function of the flatness tolerance as obtained from 3.2.11 or 3.2.12.

-33 -

A
v
a
i
l
a
b
l
e

S
i
z
e

4. Available sizes (UnitThickness/Width:mm, Length:m)
Width
Length

Thickness
1524

1599
1600

1700
1701

1800
1801

1900
1901

2050
2051

2200
2201

2400
2401

2600
2601

2800
2801

3000
3001

3200
3201

3400
3401

3600
3601

3800
Width
Length

Thickness
6.006.99
Maximum width for this area: 2000mm

Negotia tion 6.006.99
7.007.99 7.007.99
8.008.99 8.008.99
9.009.99

9.009.99
10.0011.99

10.0011.99
12.0013.99

12.0013.99
14.0015.99
Maximum length for this area: 18.5m
14.0015.99
16.0017.99

16.0017.99
18.0019.99

18.0019.99
20.0021.99

20.0021.99
22.0023.99 17.7 22.0023.99
24.0025.99 18.2 17.2 16.3 24.0025.99
26.0027.99 18.1 16.9 16.0 15.1 26.0027.99
28.0029.99 18.0 16.9 15.8 14.9 14.1 28.0029.99
30.0031.99 18.1 16.9 15.8 14.8 14.0 13.2 30.0031.99
32.0033.99 18.4 17.0 15.9 14.9 13.9 13.1 12.4 32.0033.99
34.0035.99 17.3 16.1 15.0 14.0 13.1 12.4 11.7 34.0035.99
36.0037.99 17.9 16.4 15.2 14.2 13.3 12.4 11.7 11.1 36.0037.99
38.0039.99 16.8 15.6 14.4 13.5 12.6 11.8 11.1 10.5 38.0039.99
40.0041.99 18.3 17.7 16.0 14.8 13.7 12.8 12.0 11.2 10.6 10.0 40.0041.99
42.0043.99 18.1 18.4 17.4 18.1 16.9 15.2 14.1 13.1 12.2 11.4 10.7 10.1 9.5 42.0043.99
44.0045.99 18.4 17.3 17.6 17.6 17.3 16.1 14.6 13.5 12.5 11.7 10.9 10.2 9.6 9.1 44.0045.99
46.0047.99 17.7 16.6 16.9 16.9 16.6 15.4 13.9 13.0 12.0 11.2 10.5 9.8 9.2 8.7 46.0047.99
48.0050.80 16.9 15.9 16.2 16.2 15.9 14.8 13.4 12.4 11.5 10.7 10.0 9.4 8.8 8.4 48.0050.80
50.8151.99 16.3 15.3 15.6 15.6 15.3 14.2 12.9 11.9 11.0 10.3 9.6 9.0 8.5 8.0 50.8151.99
52.0053.99 15.7 14.7 15.0 15.0 14.7 13.7 12.4 11.5 10.6 9.9 9.3 8.7 8.2 7.7 52.0053.99
54.0055.99 15.1 14.2 14.4 13.4 14.2 13.2 11.9 11.1 10.3 9.6 8.9 8.3 7.9 7.4 54.0055.99
56.0057.99 14.6 13.7 13.9 12.9 13.7 12.7 11.5 10.7 9.9 9.2 8.6 8.1 7.6 7.2 56.0057.99
58.0059.99 14.1 13.2 13.5 12.5 13.2 12.3 11.1 10.3 9.6 8.9 8.3 7.8 7.3 6.9 58.0059.99
60.0061.99 13.6 12.8 13.0 12.1 12.8 11.9 10.7 10.0 9.2 8.6 8.1 7.5 7.1 6.7 60.0061.99
62.0063.99 13.2 12.4 12.6 11.7 12.4 11.5 10.4 9.7 8.9 8.3 7.8 7.3 6.9 6.5 62.0063.99
64.0065.99 12.7 12.0 12.2 11.3 12.0 11.2 10.1 9.4 8.7 8.1 7.6 7.1 6.6 6.3 64.0065.99
66.0067.99 12.3 11.6 11.8 11.0 11.6 10.8 9.8 9.1 8.4 7.8 7.3 6.8 6.4 6.1 66.0067.99
68.0069.99 12.0 11.3 11.5 10.7 11.3 10.5 9.5 8.8 8.2 7.6 7.1 6.6 6.3 5.9 68.0069.99
70.0071.99 11.6 10.9 11.2 10.4 10.9 10.2 9.2 8.6 7.9 7.4 6.9 6.4 6.1 5.7 70.0071.99
72.0073.99 11.3 10.6 10.9 10.1 10.6 9.9 9.0 8.3 7.7 7.2 6.7 6.3 5.9 5.6 72.0073.99
74.0075.99 11.0 10.4 10.6 9.8 10.4 9.7 8.7 8.1 7.5 7.0 6.5 6.1 5.7 5.4 74.0075.99
76.0077.99 10.7 10.1 10.3 9.6 10.1 9.4 8.5 7.9 7.3 6.8 6.4 5.9 5.6 5.3 76.0077.99
78.0079.99 10.4 9.8 10.0 9.3 9.8 9.2 8.3 7.7 7.1 6.6 6.2 5.8 5.4 5.1 78.0079.99
80.0081.99 10.2 9.6 9.8 9.1 9.6 8.9 8.1 7.5 6.9 6.5 6.0 5.6 5.3 5.0 80.0081.99
82.0083.99 9.9 9.3 9.5 8.9 9.4 8.7 7.9 7.3 6.8 6.3 5.9 5.5 5.2 4.9 82.0083.99
84.0085.00 9.8 9.2 9.4 8.8 9.2 8.6 7.8 7.2 6.7 6.2 5.8 5.4 5.1 4.8 84.0085.00
85.0190.00 9.3 8.7 8.9 8.3 8.7 8.1 7.3 6.8 6.3 5.9 5.5 5.1 4.8 4.6 85.0190.00
90.0195.00 8.8 8.2 8.4 7.8 8.2 7.7 6.9 6.4 6.0 5.5 5.2 4.8 4.6 90.0195.00
95.01100.00 8.3 7.8 8.0 7.4 7.8 7.3 6.6 6.1 5.6 5.3 4.9 4.6 95.01100.00
100.01105.00 7.9 7.4 7.6 7.0 7.4 6.9 6.3 5.8 5.4 5.0 4.7 100.01105. 00
105.01110.00 7.5 7.1 7.2 6.7 7.1 6.6 6.0 5.5 5.1 4.8 105.01110.00
110.01115.00 7.2 6.8 6.9 6.4 6.8 6.3 5.7 5.3 4.9 110.01115.00
115.01120.00 6.9 6.5 6.6 6.1 6.5 6.0 5.5 5.1 4.7 115.01120.00
120.01125.00 6.6 6.2 6.3 5.9 6.2 5.8 5.2 4.8 4.5 120.01125.00
Thickness
Length
Width
1524

1599
1600

1700
1701

1800
1801

1900
1901

2050
2051

2200
2201

2400
2401

2600
2601

2800
2801

3000
3001

3200
3201

3400
3401

3600
3601

3800
Thickness
Length
Width


A
p
p
l
i
c
a
t
i
o
n

E
x
a
m
p
l
e
s
A
p
p
l
i
c
a
t
i
o
n

E
x
a
m
p
l
e
s









-36-
cargo



Taipei 101 on Building Kaohsiung high-story building on Construction
A
P
P
L
I
C
A
T
I
O
N

6. Application Examples

- 37 -

C
o
n
v
e
r
s
i
o
n

T
a
b
l
e
s

7. Conversion Tables

Length
ft in mm m
1 12 304.8 0.3048
0.08333 1 25.4 0.0254
0.003281 0.03937 1 0.001


weight 1kg=2.20462 lb


Force 1kgf=9.80665 N


Stress
ksi=1000psi psi kgf/mm
2
N/mm
2
(MPa)
1 1000 0.703070 6.89476
0.001 1 7.0307010
-4
6.8947610
-3

1.42233 1422.33 1 9.80665
0.145038 145.038 0.101972 1


Absorbed
Energy
ft-lbf kgf-m N-m=J oule
1 0.138255 1.35582
7.23301 1 9.80665
0.737562 0.101972 1

- 38 -

O
r
d
e
r

I
n
f
o
r
m
a
t
i
o
n

8. Ordering Information

Required Ordering Data Example
1
Specification(Designation Grade and Year of Issue) ASTM A516-10 Gr.60
2
Order Size(Thickness Width Length) 38.11mm1525mm3048mm
3
Order Piece 7 pieces
4
Application Pressure Vessels
5
Mill Edge or Cut Edge Cut Edge
6
Delivery Condition(As-Rolled, Normalized or Control
Rolled)
Normalized
7
Special Requirements(If required)
1. The contents of this catalog are for reference only.Customers are urged to consult the specifications published by the
corresponding Associations.
2. Information on the available steel grades,size, marking and packing as shown herein may be updated without notice
to comply with actual production situations.
3. We invite you to contact our Head Office should you have any questions concerning steel specifications or ordering
requirements.
Phone numbers are listed below for your convenience. Numbers of our international offices are shown on the back
cover.
1.Sales services
CHINA STEEL GLOBAL TRADING CORPORATION
Address: 31F, NO. 8, MING-CHUAN 2ND ROAD, KAOHSIUNG 806, TAIWAN
Tel: 886-7-3322168
Fax: 886-7-3356411
E-mail:csgtb12@mail.csc.com.tw
CSGT JAPAN CO., LTD.
Address: 2F, Osaka U2 Bldg., 4-7 Uchihonmachi 2-Chome,Chuoku, Osaka 540-0026, J apan)
Tel: 002-81-6-6910-0850
Fax: 002-81-6-6910-0851
E-mail: csgtjpn@pop21.odn.ne.jp
CSGT HONG KONG LIMITED
Address: ROOM 1407,14/F, WORLD WIDE HOUSE, 19 DES VOEUX ROAD, CENTRAL, HONG KONG
Tel: 852-25231488
Fax: 852-25234748
E-mail: admin@csgthk.com.hk
CSGT (SHANGHAI) CO.,LTD.
Address: 21F, NO.1468 NAN J ING WEST RD., SHANGHAI 200040, CHINA
TEL86-21-62896898
FAX86-21-62896678
E-mail: pcliu@csgtsha.com
CSGT (SINGAPORE) PRIVATE LIMITED
Address: 10 SHENTON WAY #14-01, MAS BLDG., SINGAPORE 079117
Tel: 65-62238777~8
Fax: 65-62256054
E-mail: cscsin@singnet.com.sg
2.Metallurgical Department
Technical Service Section-Metallurgy: 886-7-8021335
Metallurgical Specification and Testing Section: 886-7-8021111 Ext. 2207, 2208