Instruments For Various Tests
Instruments For Various Tests
Instruments For Various Tests
50
E009
E014
E016
E017
E021
E025
E020
Cement - Mortar
51
E027
E028
E030
E029
E030-01
E055-07
E031
E031-01
E037
Cement - Mortar
E037-01
52
E038
E039
V203
Cement - Mortar
53
E044
E044-20
E042
E055-13
Accessories
E043 Mould tank
For testing in water of the specimen.
E042
Needle for final setting EN / BS 1.13 mm
E042-01 Needle for final setting ASTM 1.0 mm
E042-02 Consistency probe dia. 10x50 mm
E044-30 Needle cleaning device
E044-41 Probe 100 g to make test on gypsum DIN 1168
E044-45 Additional 700 g weight (NF, EN)
E046-03 Hardened 1.13 mm needle, EN, UNI, NF, DIN, BS
E055-04 Plastic mould 80/90 x 40 mm, UNI
E055-11 Brass mould 80/90x40 mm, BS
E055-12 Split brass mould two halves 80/90x40 mm, BS
E055-13 Plastic mould 65/75 x40 mm, DIN
Cement Mortar
E055
54
E058
E059
E061
E060
E063
E061 Calorimeter
Used to determine the heat of hydration of cement by the solution
method. The apparatus consists of a dewar flask which is housed
in an insulated wooden box, constant speed electric stirrer,
Beckmann centesimal thermometer and funnel pouring the
cement. The wooden box is hinged so that the flask can be easily
removed or replaced. 220/240 V, 50 Hz, 150 W, dimensions
35x25x65 mm, weight 15 kg.
E061-11 Propeller to ASTM C196 standard
E061-12 Propeller to EN 196-8 standard
E063 Flame photometer
Standards EN 196:21 - ASTM C114:17 - BS 4550
To determine the alkali content of cement, supplied with sodium
(Na) and potassion (K) filters, fuel and air connections,
accessories, digital readout 0-199,9 ppm , reading range K or Na 3
- 100 ppm, sensibility 3 ppm, reproductibility 1% coefficient of
variation for 20 consecutive samples, operates on propane, butane,
natural gas supplies. Air supply 6 liter/min. with pressure of 1
kg/cm2. 220/240 V, 50Hz dimenions 420x360x300 m, weight 8
kg.
E063-01 Lithium (Li) filter
E063-02 Barium (Ba) filter
E063-03 Calcium (Ca) filter
E063-04 Natural gas regulator
E063-05 Propane gas regulator
E063-06 Butane gas regulator
Cement - Mortar
E064
E065
E066
E066-03, E066-02, E066-01
E067
E070
E071
55
E073
E113
E074
E107
Cement - Mortar
56
E077+S375+E078-01
E080
E082
E083
E091
Cement - Mortar
E090
E085
57
E087
Flow tables for flow and workability tests of mortar and lime
Standards ASTM C230 - BS 4551:1 - EN 459 / 2 -UNI 7044 -NF P18 - 585 - DIN 1060 -UNE 7205, 83258
- To perform this test, a specimen contained in a cone mould is placed on a metal surface which is then raised and
To perform this test, a specimen contained in a cone mould is placed on a metal surface which is then raised and
dropped from a known height, after releasing the specimen from the mould. The equipment consists of a circular
top table with spindle, bronze flow mould and tamper. The apparatuses to EN and DIN standards are equipped also
with filling hopper. Motorized models foresee an automatic digital drop counter. 220/240 V, 50 Hz, 150 W, weight
20-50 kg.
Models
E084
E085
E086
Standard
Hand
operated motorized
UNI7044
UNI7044
ASTM C230
E087-06
E087
ASTM C230/BS4551
E087-06
E088-01 NF P18-585
Table
mm
300
300
254
Drop
height mm
10
10
12.7
Spare
mould
E085-05
E085-05
E087-05
254
12.7
E087-05
250
20
E088-07
E087-01
Flow calliper to ASTM and BS standards for
measuring the of the sample, weight 450 g.
Spare
E085-06
E085-06
Cement Mortar
E093
E092
58
E095-01
E097
E095-02
E095-03
Accessories
E095-01 Stainless steel bowl
E095-02 Aluminium beater with bayonet fittings
E095-03 Stainless steel beater with bayonet fittings, to EN
196/1.
E095-04 Stainless steel beater with bayonet fittings to EN 196/1.
The beater is polished to eliminate porosity.
E097
Reference sand, size 0.08-2 mm, EN 196/1, bag of 1350 g.
E100 Three compartments mould for prisms 40x40x160 mm
Standards UNI 6009 - UNE 80101, 83258
Made of Cr/Ni steel, hardness 60 HRC. With base, stop lever and safety
catch to avoid disengagement during the jolting operation. All parts are
marked with identification number for a correct assembling, surfaces are
grinded and tolerance is held within 0.1 mm as requested by standards,
weight 12.5 kg.
E101
E100
Cement Mortar
E102-01
S200-11
E102
E102-02
E112
E105
E110
E108
E106
E111
59
E133
E130
E132
Cement Mortar
E134
Mod.
Capacity CompartLiters
ments
E134
260
2
E134-01
400
3
E134-02
550
4
Dimensions
cm
149x70x80
194x70x85
240x70x85
Weights
Watts
140
175
210
400
500
500
E136
60
E138
E139
Cement Mortar
61
E142-02
E142-02
E142-03
Procedure of use
1. Using the bit, make a round notch to the dimensions of the disc, up
to the base material. This is intended to define exactly the testing
surface.
2. Stick over the surface to be tested a disc of the relevant diameter.
This is achieved using the adhesive metolux glue.
3. The test consists in pulling out the notched part with the
instrument. The result is provided in kN.
Cement Mortar
E156+E170
E170
E171-01
E159+C120+
E170
E171
E171-01
E161+E172-01
E172-01
62
Cement Mortar
63
E183+E170+E172-01+H009+C123
C128