C# - 1

C# Programming Tutorial Davide Vitelaru
C# Programming Tutorial
Lesson 1: Introduction to Programming
About this tutorial
This tutorial will teach you the basics of programming and the basics of the C# programming language.
If you are an absolute beginner this tutorial is suited for you.
If you already know one or more programming languages, you might find it a bit boring and skip to the
next lesson.
To follow this tutorial you need to have Visual C# Express Edition 2008 or 2010 installed on your
computer. These applications are free to download and install.
The best way to learn this is by practicing. Make sure you write all the examples yourself and test them,
and that you do the tasks that I have put at the end. The tasks at the end will probably help you the
most to get used to C#.
This tutorial has been entirely created by Davide Vitelaru (http://davidevitelaru.com/).
Note: You can use the table of contents at page 20 to get around the document quickly

Software required: You must know: You will learn:
Visual C# Express
Edition 2008/2010

What programming is
What a programming
language is
Some Basics
Variables
Variable Operations
Decisions
Loops
Some Basics
Throughout this tutorial I will refer to Visual C# Express 2008/2010 as the IDE (Integrated Development
Editor).
To start with, open your IDE and create a new project (File >> New >> Project or Ctrl + Shift + N). Select
the Visual C# Console Application template from the window that appears and click OK:

Once you created your project, you will see this:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;

namespace Lesson_1
{
class Program
{
static void Main(string[] args)
{

}
}
}

I know it looks scary, but its not that complicated. You only have to worry about this section:
{

}

This is the exact place where you will write your source code, to be exact, between the braces following
static void Main(string[] args).

At this point, your application wont do anything. To start you application, press F5. You will see a black
windows appearing and closing immediately.
It closes immediately because it does exactly what you told it to do: nothing. Lets tell it to open and
wait for a keystroke to close.
Write the following line between the braces of static void Main(string[] args):
Console.ReadKey();

Now, press F5 to run your application. You will end up with a black window awaiting you to press any
key so it closes.
Lets make it even more fun, make your code look like this:
{
Console.WriteLine("Hello World!");
Console.ReadKey();
}

Again, press F5 to run your application. This time the application will display Hello World and then it
will wait for you to press a key. If you get an error, make sure you typed everything correctly. Also, dont
forget the semicolons at the end; they are very important (and annoying for beginners that keep
forgetting them).
A statement can be used multiple times. Do the following:
{
Console.WriteLine("Press a key to continue...");
Console.ReadKey();
Console.WriteLine("Now press another key...");
Console.ReadKey();
Console.WriteLine("Press again to exit...");
Console.ReadKey();
}

Just change the text between the quotation marks in the Console.WriteLine("") statement to
change the displayed message.

Whats the catch with the black window?
The black window that you are currently working at is called a console window. Back in the 1980s
computers didnt have taskbars and windows like they do now, the only had this text-based interface.
Your application has a text-based interface at the moment.
Creating an application with a user interface (windows, buttons, text boxes, etc) is usually harder, but
thanks to Microsofts .NET framework we can create one in a few easy steps; yet, that is not the point of
this lesson.
This lesson is supposed to show you the basics, and once you finish it you will be able to move on to
further lessons and create useful and good-looking applications.

Data manipulation
A program that displays messages and waits for keystrokes wont be of use to anyone, so lets make it
do something useful. Lets make it add two numbers.
Variables
Variables are like boxes, you can put things in them. In our case, we will use them to store values.
Variables are of different types, depending on the type it can store different values, for example and
integer variable can hold a number, while a string can hold characters (ex. hello my name is john 21
characters, spaces included).
To start with, lets use variables display information:
{
string name;
name = "John";
Console.WriteLine(name);
}

Press F5, run your application and see the result. If you receive an error, make sure you typed everything
correctly.
How does it work?
To use a variable, we must first create it. To create it (a better term would be to declare it), you must
type the variable type, followed by the name you want the variable to have:
string variable;
int another_variable;

At this point, both of these variables are empty. To assign a value to a variable, type the name of the
variable, equal and the value you want it to hold. If it is a string, never forget to type the value between
quotation marks:
variable = "hello there";
another_variable = 22;

Make sure you assign the correct type of value to the variable, or you will receive an error; In this case
variable is a string so it can hold a string value, and is another_variable an integer so it
can hold a number. You can name the variables however you like as long as you dont use reserved
words (like int, you cant do int int because it would return an error), and the name doesnt contain
some particular symbols, and the name doesnt start with a number.
Lets make the computer ask for our name, and then greet us:
{
Console.WriteLine("Hello, what is your name?");
string name;
name = Console.ReadLine();
Console.WriteLine("Hello, " + name);
Console.ReadKey();
}

What this code does is to declare a variable called name and then to assign it the value of the users
input.
Press F5 and introduce yourself to your program.
How does it work?
Console.ReadLine() represents the users input, or what you type in the console window. You can
assign that input to a variable as seen in the example above.
You can also tie together two strings using the + sign; in this case we tied together "Hello" and the
variable name which is a string too. You can also do "hello " + "there" and get hello
there.
Making a calculator would seem to be pretty easy, and it is, but you have to remember one thing: the
user input is a string; therefore you cannot assign it to an integer unless you convert it.
{
int number1, number2;

number1 = Int32.Parse(Console.ReadLine());

Console.WriteLine(number1.ToString() + "+" +
number2.ToString() + "=" + (number1 + number2).ToString());

Console.ReadKey();
}

Press F5, and make sure you type a number and press enter, then type another number and press enter
then stare at the result before pressing a key to exit. If you type anything but numbers it will return you
an error so be careful.
Note that you can declare variables of the same type by separating the names with a comma (int
number1, number2).
Int32.Parse() will turn what you put between the parenthesis into an integer, as long as its a string.
Example: int x; x = Int32.Parse("20");
In the previous example we used Int32.Parse() to convert the user input (that is a string) into an
integer and assign it to two integer variables.
Since the two variables (number1, number2) are integers, you cant just display them without
converting them to strings. To convert them, just type the integers name followed by
.ToString(). This will convert any integer variable, or sum of an integer variable into a string.
As you can see, we used a parenthesis to convert only the sum of the two variables:
(number1 + number2).ToString() this will convert the sum of number1 and number2 into a
string.
Number1.ToString() + number2.ToString() this will only convert them separately and
tie them together (Ex. "2" + "2" = "22").
Variable Operations
You already know how to create a calculator that can add, but lets also make it subtract, multiply and
divide.
Small side note: if you type // in your C# source code, all that remains of the line will be turned into a
comment. The comment has no importance for the application, but only for the programmer. I will use
comments in the source code to explain things easier. Comments are colored in green in the source
code.
{
//We declare two integers
int number1, number2;

//We ask the user for values
Console.WriteLine("Please insert a number:");
Console.WriteLine("Please insert another number:");

//We create a variable to hold the results
//and use it in calculations
int result;

result = number1 + number2;
//Addition, use + to add two integers
Console.WriteLine("Sum: " + result.ToString());

result = number1 - number2;
//Subtraction, use - to subtract two integers
Console.WriteLine("Subtraction: " + result.ToString());

result = number1 * number2; //Multiplication, use *
Console.WriteLine("Multiplication: " + result.ToString());

result = number1 / number2; //Division, use /
Console.WriteLine("Division: " + result.ToString());

Console.ReadKey();
}

Press F5 and try it out.

Decisions
Sometimes, you will have to execute just a piece of code depending on the users input. For example, if
the user has inserted a number and you want your application to display if the number is positive or
negative, you will need some extra pieces of code.
{
Console.WriteLine("Insert a number: ");
//As you can see, a variable can be
//assigned while it is declared (created)
int number = Int32.Parse(Console.ReadLine());

if (number > 0) Console.WriteLine("Number is positive");
else if (number == 0) Console.WriteLine("Number is 0");
else Console.WriteLine("Number is negative");

Console.ReadKey();
}

This code is easy to understand, one of the advantages of C# being the face that its similar to English.
If the number is greater than 0, display that the number is positive, else if the number is 0 display that it
is 0, else display that it is negative.
The equality operator is == because = is used to assign. The following statement would return an error:
if (number = 0) Console.WriteLine("Number is 0");
What do we do when we want to do multiple things under the same if clause?
if (number > 0)
Console.WriteLine("Greater than 0");
number = 0;

This would assign 0 no matter what number is, but if we insert both statements between braces
following the if clause we might get lucky:
if (number > 0)
{
number = 0;
}

Now, if the number is greater than 0, it will be assign the value 0 after the message is displayed.
This is how braces are used to execute multiple statements.
Lets make a calculator that lets the user decide what operation to perform.
Try to do it yourself, it would be good practice, then look at the code. Small tip: for strings just do if
(variable == "addition"), its the same syntax as it is for integers.
{ Console.WriteLine("Please insert two numbers:");
int n1 = Int32.Parse(Console.ReadLine());

Console.WriteLine("Type operation to perform:");
string decision = Console.ReadLine();

if (decision == "Add")
Console.WriteLine((n1 + n2).ToString());
else if (decision == "Subtract")
{
int result;
result = n1 - n2;
Console.WriteLine(result.ToString());
}
else if (decision == "Multiply")
{
int result = n1 * n2;
}
else if (decision == "Divide")
{
string result = (n1 / n2).ToString();
Console.WriteLine(result);
}
else Console.WriteLine("Invalid choice");

Console.ReadKey();
}

Note that I used different ways to calculate the result just to show you how you how flexible the variable
operations are.
Of course, you can use an if inside another:
if (n1 > 0)
{
if (n1 > 10)
else Console.WriteLine("Smaller than 10");

}

What if we want to check if a variable does NOT hold a value?
//If the name is not John, display
//Hello, else display Hello John
if (name != "John")
Console.WriteLine("Hello!");
else
Console.WriteLine("Hello John!");

Loops
Where would we be without loops? Imagine that we would have to write the same statement all over
again, and it might still not work.
Just imagine asking the user for a question, if he gets it wrong, what would the application do? Exit so he
can start all over, or repeat the question?
There are several ways you can make your application repeat a statement.
While loop
This loop will repeat a statement until something happens.
{
//Variable x is 5
int x = 5;

while (x > 0)
{
//While x is greater than 0,
//we display it's value and decrease it
Console.WriteLine(x.ToString());
x = x - 1;
}

Console.ReadKey();
}

As always, press F5 to test your program. It will display all numbers from 5 to 1. It will not display 0
because x will be greater than 0 at that point. What you can do is use the greater or equal operator:
while (x >= 0)
{
//While x is greater than 0,
//we display it's value and decrease it
Console.WriteLine(x.ToString());
x = x - 1;
}

This will also display 0. It also works for smaller or equal (<=).
The while loop can be used to repeat questions:
{
string password = "pass";

while (password != "1234")
{
Console.WriteLine("Please insert your password:");
password = Console.ReadLine();
}

Console.WriteLine("Password correct!");
Console.ReadKey();
}

This code will ask the user for the password (1234) and it will only stop when he gets it right. The last
two lines of code will be executed only if the user manages to escape the loop, but he cannot do that
unless he types the correct password. Press F5 and try it yourself.
Note that we assigned a value to the password variable before using it in the while loop. If we do
not assign a value to it, it will return an error.
Also, if the condition is never accomplished, the loop will run to infinity, so you better be careful what
you condition is:
{
while ((2 + 2) == 4)
{
Console.WriteLine("This will never stop");
}
}

For loop
The for loop is different from the while loop by the fact that it allows you to count the times you loop.
Lets imagine you want to display Hello! fifty times on the screen. You could type
Console.WriteLine("Hello!") fifty times in the source code, but that would just be wrong.
Instead, use a for loop:
{
//i++ is the same thing with i = i + 1
//You can use any integer to do that
//Example: int variable = 0; variable++;

for (int i = 0; i <= 50; i++)
{
Console.WriteLine("Hello!");
}

Console.ReadKey();
}

I know it looks scary, but its pretty easy. What the for loop does it to declare a variable named i
(you can name it anyway you want), you assign it the value 0, you tell it that it must not exceed 50,
and you tell it to increase itself by 1 in each loop. Once it reaches 50, it will stop.
Press F5 and test it. If you receive any error, make sure you didnt forget any semicolon in the for
statement.
Note that using ++ after an integer will increase it by 1. If you already have an integer declared, you can
use it in the for loop instead of declaring another one.
{
int variable;

//You don't have to use { } if you only have one statement
for (variable = 0; variable < 10; variable = variable + 1)
Console.WriteLine(variable.ToString());

//As you can see, I used variable = variable + 1 instead
of variable++

//And yes, you can display the value of the counter
variable (in this case
//cleverly named "variable", but named "i" in the previous
example)

Console.ReadKey();
}

This example will display the numbers from 0 to 9.

Summary
If you are working on a project and forgot something, check this section always.
This is what you learned in this lesson, plus a few extra things so make sure you read this.
Simple statements
Console.WriteLine("Hello");
Displays on the console window the string placed
between the parentheses.
Console.ReadKey();
Prompts the user to press any key.

Variables
Declaration: variable_type variable_name;
Example: int name;
Known types (at this point): int, string.
Assigning: variable_name = value;
Variable Operations
For integers:
int x;
int y;

x = Int32.Parse(Console.ReadLine());
y = Int32.Parse("5");

x = y + 5 + 10; // x will be y + 5
x = (2 + 2) + 2 / 2 + 10; //This works too
//Use as many brakets as you need
x = x + y; // x will be x + y
x++; // x will be x + 1

x += 5; //x will be x + 5
x *= 5; //x will be x * 5
//Same for / and -
x /= 5; x -= 5;

For strings:
name = "John";
age = "17";

name = "Name is:" + name + ", and the age is:" + age;
//name will hold: "Name is: John, and the age is: 17"

Console.WriteLine(name);

int x = 15;

name += x.ToString();
//+= works here too, don't try -=, *= and /= though
//name will hold: "Name is: John, and the age is: 1715"

Decisions
if (x != 0) Console.WriteLine("Number is NOT 0");

if (x == 0) Console.WriteLine("Number is 0");

int y = 5;

//You can use && to use two conditions
if (x > 0 && y > 0)
Console.WriteLine("Both numbers are positive");
//The equivalent:
if (x > 0) if (y > 0)

//This is the OR operator ||
//If any of the conditions is acomplished,
//the staments will be executed
if (x > 0 || y > 0)
Console.WriteLine("One of the numbers is positive");

//Both operators can be used more times:
if (x > 0 && y > 0 && (2 + 2 == 4))
{
Console.WriteLine("The computer agrees that 2+2 equals
4");
}

//If x is greater than 0 OR 1 + 1 equals 2
if (x > 0 || (1 + 1 == 2))
{
//If this doesn't run then you computer can't
calculate
Console.WriteLine("I don't know if the number is
positive");
//This statement will run anyway because 1+1==2 is
always true
}

Loops
//WHILE LOOP
string username = "", password = "";

//While the username is NOT John
//AND &&
//The password is not 1234
while (username != "John" && password != "1234")
{
Console.WriteLine("Username and password:");
username = Console.ReadLine();
password = Console.ReadLine();
}

Console.WriteLine("Hello John!");

//FOR LOOP
for (int i = 0; i < 10; i = i + 2)
{
//i = i + 2
//This will increment i by two each loop

//You can do any operation you want there
//Multiply by 2:
//for (int i = 0; i < 10; i = i * 2)
//or
//for (int i = 0; i < 10; i *= 2)

Console.WriteLine(i.ToString());
}

Tasks
As I promised, these are the tasks. The task actually since there is a single one in this lesson, and it might
be pretty challenging for a beginner.
Make sure you try to do them yourself before looking at the source codes. After all, the whole idea is to
learn programming.
Task Calculator
Create a simple calculator that prompts the user for 2 numbers, and then asks the user what the
operation that you want it to perform is.
The calculator must be able to do the following operations:
Addition
Subtraction
Multiplication
Division
Exponentiation (Number multiplies by itself, if youre not 7
th
grade yet dont do it)
At the end, the calculator must ask the user if he wants it to perform another calculation, and do so if he
does.
Tips: Use a for loop for the exponentiation, and a variable that holds the users answer to perform
another operation at the end along with a while loop. Also, you can write the way the application will
work on a piece of paper, and then translate what you wrote in C#.

Code:
{
//This variable holds the user's
//decision to perform another operation
string answer = "yes";

//While the answer is "yes"
while (answer == "yes")
{
//Asking the user for the numbers
Console.WriteLine("Insert a number: ");
Console.WriteLine("Insert another number:");

//Asking the user for the operation to perform
//Using a while loop to make sure that he gets it
right

Console.WriteLine("Operation to perform: ");
string operation = "none"; //This will hold the answer

//If the user doesn't insert a correct answer, he will
be asked to insert an answer again
while (operation != "add" && operation != "subtract"
&& operation != "multiply" && operation != "divide" && operation !=
"exponent")
{
operation = Console.ReadLine();
}

if (operation == "add")
Console.WriteLine((n1 + n2).ToString());

else if (operation == "subtract")
Console.WriteLine((n1 - n2).ToString());

else if (operation == "multiply")
Console.WriteLine((n1 * n2).ToString());

else if (operation == "divide")
Console.WriteLine((n1 / n2).ToString());

else if (operation == "exponent")
{
int result = 1;

//This will multiply n1 with itself for n2 times
for (int i = 0; i <= n2; i++)
result *= n1;

}

//Asking the user for another operation
Console.WriteLine("Would you like to perfom another
operation?");
answer = Console.ReadLine();
}
}

Watch it running:

Contents
About this tutorial ................................................................................................................................... 1
Some Basics............................................................................................................................................. 2
Whats the catch with the black window? ............................................................................................ 4
Data manipulation ................................................................................................................................... 5
Variables .............................................................................................................................................. 5
Variable Operations ............................................................................................................................. 7
Decisions ................................................................................................................................................. 9
Loops .................................................................................................................................................... 12
While loop ......................................................................................................................................... 12
For loop ............................................................................................................................................. 13
Summary ............................................................................................................................................... 15
Tasks ..................................................................................................................................................... 18
Task Calculator ................................................................................................................................ 18

C# - 1

Uploaded by

Copyright:

Available Formats

C# - 1

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

C# - 1

Uploaded by

Copyright:

Available Formats

C# Programming Tutorial Davide Vitelaru

You might also like