Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 658 views

    Heidenhain TNC 355: Ncnet 7.0 Settings

    Uploaded by

    Donald Santana Bautista
    The document provides settings and connection instructions for transferring NC programs between a Heidenhain TNC 355 controller and a PC running NCnet 7.0 software. It includes parameters to set on the machine and PC, as well as details on machine identification, communication ports and folders, baud rate, and cable connections depending on whether the PC has a 9-pin or 25-pin serial port connector. Drip feed mode is noted to be unavailable for this controller.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Heidenhain TNC 355: Ncnet 7.0 Settings

    Uploaded by

    Donald Santana Bautista
    658 views2 pages
    The document provides settings and connection instructions for transferring NC programs between a Heidenhain TNC 355 controller and a PC running NCnet 7.0 software. It includes parameters to set on the machine and PC, as well as details on machine identification, communication ports and folders, baud rate, and cable connections depending on whether the PC has a 9-pin or 25-pin serial port connector. Drip feed mode is noted to be unavailable for this controller.

    Original Title

    heidenhain-355-v70

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides settings and connection instructions for transferring NC programs between a Heidenhain TNC 355 controller and a PC running NCnet 7.0 software. It includes parameters to set on the machine and PC, as well as details on machine identification, communication ports and folders, baud rate, and cable connections depending on whether the PC has a 9-pin or 25-pin serial port connector. Drip feed mode is noted to be unavailable for this controller.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    658 views2 pages

    Heidenhain TNC 355: Ncnet 7.0 Settings

    Uploaded by

    Donald Santana Bautista
    The document provides settings and connection instructions for transferring NC programs between a Heidenhain TNC 355 controller and a PC running NCnet 7.0 software. It includes parameters to set on the machine and PC, as well as details on machine identification, communication ports and folders, baud rate, and cable connections depending on whether the PC has a 9-pin or 25-pin serial port connector. Drip feed mode is noted to be unavailable for this controller.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Page 1 of 2

    Heidenhain TNC 355


    NCnet 7.0 settings

    Set these parameters on the machine

    MP232 = 0 (data transfer mode)
    MP71 = 515 (character for program start and end)
    MP222 = 104 (data format)


    To set the controller in the Drip-feed mode
    Drip feed is not available on this controller.

    Set these parameters on the PC

    Machine details

    Machine name MCH-1
    Control system Heidenhain
    Machine ID 01
    Communication Channel Serial Port
    Port Number Any free COM port
    Folder for PC to Machine transfer Transmit directory
    Folder for Machine to PC transfer Receive directory
    Baud rate 2400
    Data bits 7
    Parity Even
    Stop bits 2
    Handshake Hardware

    General settings
    Ignore this. Leave all data as it is.

    Transmit settings

    Wait period at start of transmission 10.00
    Wait period after transmitting program 5.0
    Size of transmit packet 0
    Delay period after each packet 0
    Wait for XON before transmitting program No
    Transmit comments? Yes
    Comment start character (
    Comment end character )
    Translation mode for CR Transmit as CR
    Translation mode for LF Transmit as LF
    Acknowledgement and error (Mode of transmission) Transmit descriptive message
    ACK/ERR Message start text %1234G71G50
    ACK/ERR Message start text M30
    %1234G71G50
    Filter Null Character Yes





    Page 2 of 2
    NC Program settings

    Program start string
    Program end string
    Characters to transmit at start Number of Characters
    Characters to transmit at start Number of Characters

    Receive settings

    Wait period before receiving program 45.0
    Wait period after receiving program 5.0
    Transmit XON before transmitting program No
    Auto compare and save Yes
    Acknowledgements and errors Transmit descriptive messages
    Translation mode for CR Ignore
    Translation mode for LF Save as CRLF
    Ignore control characters other than CR-LF Yes
    Save Program between Start Characters and End Characters No
    Start Program reception after these characters are received
    End Program reception after these characters are received

    To set the PC in the Drip-feed mode
    Drip feed is not available on this controller.

    Cable connections

    If the PC has 9 pin connector

    Null modem Full Handshake
    PC
    9 pin
    1
    2
    3
    4
    5
    6
    7
    8
    8
    2
    3
    20
    7
    6
    4
    5
    CNC
    25 pin

    PC
    9 pin
    1
    2
    3
    4
    5
    6
    7
    8
    8
    2
    3
    6
    7
    20
    5
    4
    CNC
    25 pin


    If the PC has 25 pin connector

    Null modem Full Handshake
    PC
    25 pin
    8
    2
    3
    20
    7
    6
    4
    5
    8
    3
    2
    20
    7
    6
    4
    5
    CNC
    25 pin

    PC
    25 pin
    8
    2
    3
    20
    7
    6
    4
    5
    8
    3
    2
    6
    7
    20
    5
    4
    CNC
    25 pin

    You might also like