Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 76 views

    Unilab Laboratory: Programmable Automatic Power Supply Unit DL 1067

    Uploaded by

    Ivan Villaneva
    This document provides details about an automatic programmable power supply unit. It describes the technical features and operating instructions for the unit. The document explains how to operate the unit manually and automatically and provides maintenance instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Unilab Laboratory: Programmable Automatic Power Supply Unit DL 1067

    Uploaded by

    Ivan Villaneva
    76 views5 pages
    This document provides details about an automatic programmable power supply unit. It describes the technical features and operating instructions for the unit. The document explains how to operate the unit manually and automatically and provides maintenance instructions.

    Original Description:

    De lorenzo

    Original Title

    DL1067_

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details about an automatic programmable power supply unit. It describes the technical features and operating instructions for the unit. The document explains how to operate the unit manually and automatically and provides maintenance instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    76 views5 pages

    Unilab Laboratory: Programmable Automatic Power Supply Unit DL 1067

    Uploaded by

    Ivan Villaneva
    This document provides details about an automatic programmable power supply unit. It describes the technical features and operating instructions for the unit. The document explains how to operate the unit manually and automatically and provides maintenance instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Unilab Laboratory

    PROGRAMMABLE AUTOMATIC
    POWER SUPPLY UNIT
    DL 1067
    DL 1067
    ver a20130125
    2
    GENERAL NOTES

    The DL 1067 power supply unit is suitable for regulating the excitation voltage of electric machines
    and brakes. It is essentially composed of a motor-driven variator, a control board and a single-phase
    bridge.

    It can be either internally controlled in manual mode or externally controlled in automatic mode
    through the data acquisition system and the relevant software.




    TECHNICAL FEAUTURES

    Automatic power supply unit having the following features:

    Continuously adjustable output voltage: 0 to 210 V
    Fixed output current: max. 2A
    Magneto-thermal protection
    Analog signal INPUT terminals and connectors: 0 to 10 V




    OPERATING INSTRUCTIONS

    Check the presence and efficiency of the fuse. Check that the main voltage corresponds to the
    voltage shown on the plate (220V + E), then connect the power chord to PR1 socket.
    Operate the mains switch J1. The pilot lamp of the switch on the front panel must turn on.




    MANUAL OPERATION

    Open the switch J1, counter-clockwise turn the voltage potentiometer P1 and set the function switch
    J2 to manual position MAN.
    Connect a 250V range dc voltmeter to B4 and B5 terminals respecting the polarities.
    Close the switch J1 and, by clockwise turning the potentiometer P1, read the output voltage on the
    voltmeter.



    AUTOMATIC OPERATION

    Remove the supply of the equipment according to previous point.
    Set the switch J2 to AUTO.
    Connect the terminals B1 and B2 to the data acquisition system as required by the (software)
    program and close the switch J1.
    The 0 to 210V, 2A output is protected by the magneto-thermal switch J3.
    DL 1067
    ver a20130125
    3
    LAYOUT OF THE CONTROL DEVICE



    J1 Pilot lamp
    P1 Potentiometer for variable regulation
    J2 Control system selection switch
    J3 Magneto-thermal protection of variator
    B1, B2 Terminals for system connection
    B3 Ground terminal
    B4, B5 Output terminals




    PR1 Main socket with protection fuse (rear of panel)




    DL 1067
    ver a20130125
    4
    MAINTENANCE

    The unit doesnt require any special maintenance operation.
    It can be checked without any difficulty.

    In case of faulty operation, DISCONNECT THE MAINS CONNECTION.
    Then open the unit and access to the inside.

    It is enough to check that the components and the connections are efficient according to the electric
    diagram.

    The motor is controlled through an electronic board on which a fuse-holder with fuse is assembled.

    Check the fuse and the connections. If the equipment doesnt operate it is suggested not to change
    the calibrations of the electronic board, otherwise the guarantee would be lost.



    1996 - 2013 DE LORENZO SPA - Printed in Italy - All right reserved
    DE LORENZO SPA
    V.le Romagna, 20 - 20089 Rozzano (MI) Italy
    Tel. ++39 02 8254551 - Fax ++39 02 8255181
    E-mail: info@delorenzo.it
    Web sites: www.delorenzoglobal.com - www.technical-education.it -
    www.delorenzoenergy.com

    You might also like