ald

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, Install in accordance with the
manufacturers instructions.
8. Do not install near any heat sources such as registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug; a
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety, if the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used. Use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lighting storms or
when unused for long periods of time
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC
OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS
ON THE EQUIPMENT.
Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of dangerous
voltage within the products enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.

Class
construction

An apparatus with CLASS construction shall be connected to a MAINS socket

outlet with a protective earthling connection.

Battery
Batteries(battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
(CAUTION)

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Disconnection Device
Disconnect the main plug from the apparatus, if its defected. And please call a
repair man in your location.

When used outside of the U.S., it may be used HAR code with
fittings of an approved agency is employed.
3

CAUTION
These servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.

FCC Information (for U.S.A)

Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment under FCC
rules.

NOTE ON RECYCLING (for EUROPE)

This products packaging materials are recyclable and can be
reused. Please dispose of any materials in accordance with the
local recycling regulations.
When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but
disposed of in accordance with the local regulations concerning
chemical waste.
This product and the accessories packed together constitute the
applicable product according to the WEEE directive except batteries

Contents
Important safety instructions

Chapter 1. HD Stream Generator introduction

Control and connection 9
Remote control unit 11
Inserting battery to remote control 12
Remote control angle range 12
Using IR extension receiver 12
Package and accessories 13
Cautions 14

Chapter 2. Connections
Before connecting
Connecting video cable
Connecting with Component Cables
Connecting with HDMI
Connecting with Composite and S-Video cable
Connecting audio cable

17
18
18
19
20
21

Chapter 3. Basic usage

PLAY LIST menu
Playing file
Changing PLAY LIST order
Set up a Multi-Play List
Deleting file(s) from PLAY LIST
A-B Repeat
Checking information for the current playing file
Resolution

24
25
28
29
31
32
32
33

Chapter 4. Updating file(s)

UPDATE menu
Updating file(s) with SYSTEM (HDD)
Auto update with DVD-ROM or USB storage device
See Update Progress Status
Manual Updating file(s) with DVD-ROM Drive

36
37
39
40
41

Manual Updating file(s) with USB Storage Device 43

Preview 45
Sub Directory Folder 46
Deleting file(s) from System 47

Chapter 5. User Interface Setting

SETUP menu 50
SYSTEM 51
Setting 3D

53

Image File Play time creation 54

NETWORK 55
Network Features 56
How to use shared folder in Windows 57
Firewall check & setting 57
How to set shared folder(In case of using hub or router) 59
How to set shared folder(In case of using cross cable) 61
Before Folder Sharing 62
How to set up folder share 63
Update through SAMBA Networking 65
FIRMWARE 66
Setting DATE & TIME 67
How to schedule Date & Time 68

Chapter 6. Appendix
Troubleshooting 69
Precautions for the Installation of Generator 70
Specification 72

Important safety instructions

Please read following recommended safety instructions carefully.
Do not place this product on an uneven
surface.

Do not install on a surface where exposed

to direct sunlight, near
heating .equipment or heavy cold area.

Prevent water or dust from the product.

Do not attempt to repair this product

yourself.

Do not place glass contained of liquid

on the product.

Place the product at proper ventilation

Do not install this product near

any magnetic source.

Do not place heavy items on the product.

area.

Copyright 2011, DigitalZone Co., Ltd. All rights reserved.

Read these operating instructions carefully before using the product.
Follow the safety instructions on the unit and the safety precautions listed in
the manual. Keep this manual handy for future reference.
DigitalZone Logo & NexD is registered trade mark of DigitalZone Co., Ltd.

Chapter 1.
HD Stream Generator introduction

Control and connection 9

Remote control unit 11
Inserting battery to remote control 12
Remote control angle range 12
Using IR extension receiver 12
Package and accessories 13
Cautions 14

Control and connection

HVP-4012R/N, HVP-4015R/N, HVP-4005R

Front (Front touch buttons are lockable to prevent unintentional operation.)

Press MENU and UP() button at the same

time to lock all front buttons.
Beep sound indicates front buttons are locked. Repeating same
sequence will unlock all front buttons with beep sound

REAR

HVP-4004 / HVP-4008

Front (Operation: Remote control only)

To operate of HVP-4004 and HVP-4008, please turn on the power

which is located in the back side and use the remote control.
- Please be careful for lost of remote control unit.
To operate of HVP-4012R/N and HVP-4015R/N and HVP-4005R,
you can use both menu buttons in the front and remote control unit.

REAR

10

Remote control unit

Selected resolution is shown at front LED.

11

Inserting battery to
remote control

Remote control angle range

Remote control angle range is within 3~5m
distance with 60 degree of angle scope.

1. Pull out the insert part.

2. Place the battery checking

+ polarity.

Using IR extension receiver

IR extension receiver is used to control the
HD Stream Generator from far distance or
behind an obstacle. When IR extension
receiver is connected front IR of HD
Stream Generator will not work.

3. Push in the insert part

12

Chapter 1. HD Stream Generator introduction

Package and accessories

Accessories could be changed without any notice.

Additional accessories or any accessories other than above should
be purchased separately. (www.dzonei.com)
Distributors and users should keep in mind that the device is for commercial

use (Grade A), which acquired EMC (Electronicmagnetic Capability), and it is

intended to be used in areas, except for a domestic purpose.

Digitalzone will not be responsible for any problems caused by using any
other adopter we don't provide.
About A/S: +82.2.6330.2360

13

Cautions

If the device is turned on, DO NOT pull plug out of outlet. It can be cause of
defection on hard disk drive or system.
In case of system error, turn the power off and on. Thus, system will be
automatically recovering the error.
(The booting time could take longer than usual)

14

Chapter 1. HD Stream Generator introduction

15

USER Manual

Chapter 2. Connections

Before connecting 17
Connecting video cable 18
Connecting audio cable 21

16

Chapter 2. Connections

Before connecting

1. Check each name of the port(s).

2. Check output of HD Stream Generator and input of TV is
respectively connected with same cable.
3. Check output setting of HD Stream Generator and input selection of
TV is respectively matched.
4. Check whether cable(s) is connected tightly without loose.
5. When theres no picture in TV check whether TVs input selection is
selected to correct port.

HD stream generator has 2 different ways of video output, Analog

and Digital

Digital output : HDMI

Analog output :S-Video(4012 model only), Composite(4012/4015 model
only),

Component(4012/4015 model only)

- Composite, S-Video recommended for the testing purpose only.

17

USER Manual

Connecting video cable

00Connecting with Component Cable00s
1. Connect HD Stream Generator to TV with component cable.
Please make sure component cable is connected to each right output and
input port of HD Stream Generator and TV.

2. When audio is needed please connect HD Stream Generator to TV

with audio cable.

18

Chapter 2. Connections

00Connecting with HDMI00

1. Connect HD Stream Generator to TV with HDMI cable.

2. HDMI supports both audio and video signal together, theres no additional
audio cable needed.

- When HD Stream Generator is connected with more than one TV by HDMI

cable and EDID is set on in SETUP menu, intersection of all connected TVs
receivable resolution(s) will be selectable with HD Stream Generator.
- When connecting HDMI cables for HVP-4015 model, it is highly
recommended to connect longer one first. (Support up to **10M.)
What is EDID? (Extended Display Identification Data)
Extended Display Identification Data is VESA standard data format that contains
information about a monitor and its capabilities, including vendor information, maximum
image size, color characteristics, factory pre-set timings, frequency range limits and
character strings for the monitor name and serial number. The information is stored in the
display and is used to communicate with the system through a Display Data
Channel(DDC), which sites between the monitor and the PC graphics adapter. The system
uses this information for configuration purposes, so the monitor and system can work
together.

19

USER Manual

00Connecting with Composite and S-Video(4012 model only) cable00

1. Connect HD Stream Generator to TV with Composite or S-Video(4012 model only)
cable.
Please make sure Composite or S-Video cable is connected to each right output and
input of HD Stream Generator and TV.

2. Check your TVs Video input setting if its correctly selected for analog
video input.
(ex. Video 1, Video 2 ) the title of video input may be different from each
TV and manufacturer)
3. When audio is needed please connect HD Stream Generator to TV with
audio cable.

:
In order to check video from S-Video/Composite, stop playing
video & press the key Composite/S-video on remote control.

20

Chapter 2. Connections

Connecting audio cable

Audio signal is connectable between HD Stream Generator with TV directly.
For better audio quality, audio signal can be connected between HD Stream
Generator with other digital audio equipment/amplifier.

Provides enhanced sound if used with an amplifier connected to optical

terminals. The cables for digital audio should be purchased by option.
Please ask your local dealer or shop.
21

USER Manual

22

USER Manual

Chapter 3. Basic usage

PLAY LIST menu 24

Playing file 25
Changing PLAY LIST order 28
Set up a Multi-Play List 29
Deleting file(s) from PLAY LIST 31
A-B Repeat 32
Checking information for the current playing file 32
RESOLUTION 33

23

USER Manual

PLAY LIST menu

00PLAY LIST menu Remote Control Unit00

Press LIST on remote control to open

PLAY LIST menu.

00PLAY LIST menu Front touch button00

Touch MENU button to open

MENU selection. Touch DIRECTION
button to move PLAY LIST.
Touch ENTER button to open PLAY LIST.

:
PLAY LIST menu is frequently used, please read carefully before using.
HVP-4012R/N and HVP-4015R/N and HVP-4005R

There is MENU button on the front.
(Refer manual for explanation of FRONT, and REMOTE.)

HVP-4004 and HVP-4008
There is no MENU button on the front. .

(Refer manual for explanation of REMOTE only.)
24

Chapter 4. Updating file(s)

Playing file
PLAY LIST can be controlled to loop play with checked file(s). Checked file(s) will be
activated and loop play while unchecked file(s) are deactivated.

Play
Play desired file by
pressing ENTER on
remote control or
PLAY icon on front
touch.

Move
Move to desired file
with UP/DOWN key on
front touch control or
remote control

Example)
Play LIST menu

Loop play only Digital-01.tp

Loop play only Digital-01.tp,

Digital-02.tp,
Digital-03.tp

25

USER Manual

Example 1) When playing only Digital-01.tp

Startup status
1. Press List button.

2. Move cursor using

direction key to
Digital-02.tp.

3. Press Check button three

times.

4. Move cursor using direction

key toDigital-01.tp.

5. Press Enter/

Cursor moved into Digital-02.tp.

Now Digital-02.tp, Digital-03.tp, Digital04.tp will be deactivated.

Cursor moves to Digital-01.tp.

ll for File Play.

Played Digital-01.tp only..

26

Chapter 4. Updating file(s)

Example 2) When Playing Digital-01.tp,Digital-02.tp,

Digital-03.tp
1. Press List Button.

2. Move cursor using

Startup status

Cursor moved into Digital-02.tp.

' direction key to Digital-02.tp.

3. Press Check Button.

Digital-02.tp will be activated.

4. Move cursor using

direction key to
Digital-03.tp.

Cursor moved into Digital-03.tp.

5. Press Check Button.

Digital-03.tp will be activated

6. Press Enter/
for play.

ll button
Digital-01.tp, Digital-02.tp,
Digital-03.tp will be played.

27

USER Manual

Changing PLAY LIST order

Order in the PLAY LIST can be changed by manually.

Move up
Selected file will move up.

Move down
Selected file will move down.

File play by number key

By entering number on the remote control relative
file number will be played during file playing.
File play by number key only operates
in Play/Pause/Trick mode status.

28

Chapter 4. Updating file(s)

Set up a Multi-Play List

You can utilize multi Play List and order of each Play List

Advantage: 1. Possible to manage many stream files easily.

2. Easily checkup current Multi-Play List information.

Multi-Play List features given for the purpose of numerous stream files more
efficiently.
Users can set up and manage total 10 set of Multi-Play List.
It is possible to change & arrange the list ONLY in PLAY LIST menu.

CAUTION: File play should be stopped when you want to set above functions.
1. To use a PLAY LIST, please stop the play.
2. It is possible to move between PLAY LIST to use a direction key
(Left and Right) in a mode of STOP.

29

USER Manual

Example 1) When You want to create play list into Play List 3
1. Open PLAY LIST menu after
stop the file play. Using

direction key, move to

PlayList 3.

cursor shows move to Play List3.

Available only remote controller.

List shows available stream files.
2. Press Update button.

Select Digital-01/02/03.tp.
(Selected file will be deactivated.)
3. Press Check button.

Multi-selection feature supported

only on remote controller.
4. Press Enter button to send
Play list 3

30

You can check Digital-01/02/03.tp files

created into PlayList3.

Chapter 4. Updating file(s)

Deleting file(s) from PLAY LIST

File(s) deleted from PLAY LIST will be moved to SYSTEM menu, submenu of UPDATE
for backup. Backup file(s) can be updated later if you want to.

Move
Move to desired file which should be deleted from PLAY
LIST with direction keys.

Delete
Press DELETE button on remote or front touch.

Select
Select YES on Confirmation pop up menu.

Enter
Press ENTER button on remote control or front touch
to activate delete.

31

USER Manual

A-B Repeat
Mark A and B section to loop play A-B.

Check
Press CHECK button on remote to mark A and press
CHECK again to mark B while it playing.
A-B section will start loop play.

Press CANCEL button when you want to stop A-B repeat.

Checking information for the current playing file
Possible to check the current playing file Information.
(i.e. file name and output resolution and play time of current file)

Information
To check current playing file information (i.e. file name and
output resolution), press ENTER on remote control or front
touch. Information pop up window will appear.

32

Chapter 4. Updating file(s)

RESOLUTION
Select desired resolution.

EDID On: (Setting on Set up Menu)

TV supporting resolution will be activated.
EDID Off or not connected with HDMI:
All resolutions will be shown.

Press RESOLUTION button on remote control or VIDEO

on front touch to open RESOLUTION menu.

Select desired menu with LEFT/RIGHT

direction keys. Select desired sub-resolution
with UP/DOWN direction keys.
Press ENTER button to set the output resolution.

Confirmation window opened for resolution change.

Select YES or NO using left, right direction button.

Resolution change executed by pressing ENTER button.

- Press RESOLUTION button once again, if you want to

close RESOLUTION menu window.
- If no image is displayed when resolution is hanged,
press the 1080i button in the remote control.
33

USER Manual

34

Chapter 4. Updating file(s)

Chapter 4. Updating file(s)

UPDATE menu 36
Updating file(s) with SYSTEM 37
Auto update with DVD-ROM or USB storage device 39
See Update Progress Status 40
Manual Updating file(s) with DVD-ROM Drive 41
Manual Updating file(s) with USB Storage Device 43
Preview 45
Sub Directory Folder 46
Deleting file(s) from System 47

35

USER Manual

UPDATE menu
00 UPDATE menu Remote Control Unit 000

Press UPDATE on remote control

to open UPDATE menu.

00 UPDATE menu Front touch button 000

Touch MENU button to open MENU

selection. Touch DIRECTION button
to move to UPDATE.
Touch ENTER button to open UPDATE.

Update media can be selected using direction keys

USB can be recognized when the device is connected only.

36

Chapter 4. Updating file(s)

Updating file(s) with SYSTEM (HDD)

Backup file(s) in SYSTEM can be updated to PLAY LIST for playing.

UPDATE menu
Press UPDATE button on remote control
or front touch.
Select media to SYSTEM
select media to SYSTEM.
Using direction key

Update
Press ENTER button on remote control or
front touch to update.
Update check
Press LIST button on remote control or front touch.
Check update would be done correctly.

File(s) deleted from PLAY LIST is moved to SYSTEM for back up. Although original
update media(i.e. DVD or CD disk or USB Storage Device) is lost, once updated to
SYSTEM, these file(s) can be played.
37

USER Manual

Example) Update Digital-06.tp in SYSTEM

1. Press Update button.

2. Use the
key to move,
select Digital-06.tp with the
CHECK key..

3. Press Enter button.

UPDATE menu will appear.

Cursor moves to Digital-06.tp.

Digital-06.tp will be updated to PLAY LIST

and disappeared from SYSTEM.

Digital-06.tp is updated to PLAY LIST menu.

4. Press List button.

38

Chapter 4. Updating file(s)

Auto update with DVD-ROM or USB storage device.

The files can be updated automatically when you insert DVD-ROM or connect USB
device while playing.

1. Playing status
Automatic update is Only
available during playing status.
(If Disc or USB is not connected)

Playing status
Insert DVD-ROM
2. Insert DVD-ROM disc or Connect
USB device.

Connect USB device

3. Itll start updating files automatically.
You will see updating information.

Playing status

- An updating screen will be displayed

and converse to a recycled screen.
- Press ENTER key to view updated
status.

Care for DVD-ROM or USB device update.

The files you want to update automatically should be restored on the root
folder of DVD-ROM or USB device.
When its on auto updating procedure, updated files will be listed to the
current selected Play List.

Do not turn off the power during the updating.

39

USER Manual

See Update Progress Status

1. To check stream update while screen is in recycling status.
Press ENTER in the
regeneration screen

Playing status

Playing status

2. To check stream update while screen is in recycling status

Press UPDATE in the
regeneration screen

Playing status

3. To converse stream update screen status to a recycle screen

PressPLAY/PAUSE
button while updating.

Playing status

1. Automatic update: Total Estimation Time is the time for existing update, thus
no consideration is given for additional update. In addition, entire update time can
be increased depending on stream recycling time.
2. Manual update: To avoid using recycle function, update stream in an empty
Play List for update. (Total Estimation Time during update in an empty Play List is
the same as the time estimated in existing update time.)
3. Updating in a stream update screen: Pressing CANCEL button will update
the next stream, and pressing STOP while updating will cancel the whole
streaming.
40

USER Manual

Manual Updating file(s) with DVD-ROM Drive

File(s) can be updated with CD or DVD disk with DVD-ROM Drive (Only with 4012R,
4015R, 4005R model.)
It will be working after connect USB in stop status.

00Insert disk 00

Push in CD or DVD disk to DVD-ROM Drive.

00Eject disk00

Front touch Open MENU selection by touching MENU

button on front. Using direction keys to Eject icon and touch
ENTER to eject the disk.
Remote control Press EJECT button.

DVD-ROM Drive is for file(s) update and Firmware upgrade only.

DVD-ROM Drive cant play ordinary CD or DVD titles.

Select Multi-Play List

Press LIST button then, it will be shown play list page.
After moving to play list no. by using direction keys, press
UPDATE button. Files update on the play list you selected.
1. UPDATE menu
Press UPDATE button to open UPDATE menu.

41

USER Manual

2. Select Media to DVD-ROM

Using direction keys
select Media to
DVD-ROM.
In DVD-ROM update case, each file can be
updated individually.
3. Check designated file to update ( Available multi-selection)
Press CHECK button on designate file.

( Available All files will be updated if you press ENTER button without
file selection.)

4. Update
Press Enter button to activate update.

Please refer to the See update progress status page (front page) for more details.

Do not power off HD Stream Generator during update.

Updated file(s) is/are damaged when power is manually turned off during updating
stage. Delete all file(s) updated to PLAY LIST when manually turned off and repeat
update procedure once again. When all update is completed, DVD will be
automatically ejected.
5. Check Update
Press LIST button to open LIST menu to check update
process.

CANCEL
In order to cancel current updating file, press CANCEL button on
remote to stop selected files updating process.
Update Stop
Press STOP button on remote if you want to cancel whole files
updating procedure.
42

Chapter 4. Updating file(s)

Manual Updating file(s) with USB Storage Device

File(s) stored in USB Storage Device can be updated to HD Stream Generator.

It will be working after connect USB in stop status.

USB Media menu will appear when USB Storage Device is connected.
Select Multi-Play List
Press List button to check Play List information.
Move cursor, using direction button to designated Play List
number and press UPDATE button to update menu.

1. UPDATE menu
Open UPDATE menu.

2. Select Media to USB

Using direction keys select
USB Media menu.

43

USER Manual

3. Check designated file to update ( Available multiselection)

Press CHECK button on designate file.
(All files will be updated if you press ENTER button without file
select.)

4. Update
Press Enter button to activate update.

Please refer to the See update progress status page (front page) for more details.

Do not power off HD Stream Generator during update.

Updated file(s) is/are damaged when power is manually turned off during updating
stage. Delete all file(s) updated to PLAY LIST when manually turned off and repeat
update procedure once again.
5. Check update
Press LIST button to open LIST menu to check
update process.

CANCEL
In order to cancel current updating file, press CANCEL button on
remote to stop selected files updating process.

Update Stop

Press STOP button on remote

updating procedure.
44

if you want to cancel whole files

Chapter 4. Updating file(s)

Preview
You can check stream file(s) stored in ODD/USB/Network prior to update into HD
stream generator.
1. Update Menu
Select media(ODD/USB/Network) which contains file(s)
to update, using direction button.

2. Select Play/Pause
It shows preview window if you press Play/Pause button.
(Selected file only.)

3. Preview stop
Press stop button or direction button to stop preview.

Preview function is not applied in system menu under update menu.

Some of higher resolution files are might not previewed properly.
45

USER Manual

Sub Directory Folder

You can update files from ODD/USB devices sub directory folder.

Move to Folder
Press ENTER button to move
designated folder.
You can easily update from designated folder, select file(s) using direction button.

46

Chapter 4. Updating file(s)

Deleting file(s) from System

File(s) can be permanently removed from SYSTEM (HDD).

Select File from Play List

Press LIST button to open Play List menu.
Press Delete key after select file(s).
Removed file(s) will be moved to System in UPDATE
menu.
UPDATE menu
Open UPDATE menu and select SYSTEM media.
Move
Using direction keys move to the desired file to be deleted.
Delete
Press DELETE button.

Select
Select YES on Confirmation pop up menu.
Enter
Press ENTER button on remote control or front touch to
activate delete.

- Delete is not possible if the file is listed on multi play list.

- In order to delete the file in the system, delete the file from the multi play list first.
47

USER Manual

48

Chapter 5. User Interface Setting

SETUP menu 50
SYSTEM 51
Setting 3D 53
Image File Play Time Creation 54
NETWORK 55
Network Features 56
How to use shared folder in Windows 57
Firewall check & setting 57
How to set shared folder (In case of using hub or router) 59
How to set shared folder (In case of using cross cable) 61
Before Folder Sharing 62
How to set up folder share 63
Update through SAMBA Networking 65
FIRMWARE 66
Setting DATE & TIME 67
How to schedule Date & Time 68
49

USER Manual

SETUP menu
00SETUP menu Remote Control Unit00

Press SETUP on remote control to open

SETUP menu.

00SETUP menu Front touch button00

Touch MENU button to open MENU selection.

Touch DIRECTION button to move to SETUP.
Touch ENTER button to open SETUP menu

50

System

Firmware

Network

Date & Time

Chapter 5. User Interface Setting

SYSTEM

Set Refresh Rate and EDID.( Cable(s) must be connected during setting)

Press SETUP button to open SETUP menu.

Use LEFT/RIGHT direction keys to move to desired

features. ( Status is pre set to SYSTEM.)

Use UP/DOWN direction keys to move to sub menu.

Press ENTER button to set sub menu selection.

Use direction keys to select desired

settings.

(Refresh Rate: 50Hz,60Hz,50&60Hz,

Auto, Native.)
Color Space : YCbCr 16~235,
RGB 2(16~235, 0~255)
Press SETUP button to close the menu.
51

USER Manual

EDID Limit : OFF

Refresh Rate

Status

Resolution coverage
720p50, 720p60, 1080i50,
1080i60, 1080p24, 1080p25,
1080p30, 1080p50, 1080p60

50&60Hz

Output is set to 50 & 60Hz.

60Hz

Output is set to 60Hz

720p60, 1080i60, 1080p24,

1080p30, 1080p60

50Hz

Output is set to 50Hz.

720p50, 1080i50, 1080p24,

1080p25, 1080p50

Auto

Output is set on playing file

information.
(Refresh Rate is changed by file
information.)

720p50, 720p60, 1080i50,

1080i60, 1080p24, 1080p25,
1080p30, 1080p50,
1080p60

Native

Output is set on playing file

information.
(Refresh Rate and Resolution is
changed by file information.)

Note : When there is no image on Screen

Press 1080i button on the remote control forcefully
set output to 1080i.
EDID Limit : ON
Refresh Rate

Status

Auto

TV EDID and file information is read and output

most suitable resolution. Only refresh Rate is
changed. Possible to output up to 1080p60.

Native

TV EDID and file information is read and output

most suitable resolution. Refresh Rate and
resolution is changed.

Set 50Hz,
60Hz,
50&60Hz

Output is set based on TV EDID information.

Refresh Rate and resolution is changed
manually.

Resolution
coverage
Based on TV
EDID
information.

You can enjoy more delicate video image by selecting RGB level into
16~235 which allows to express more detailed black color depth expression.
52

Setting 3D Mode
Type

ICON

Description

NONE

All files are played in 2D play-back

mode

AUTO

A picture is automatically converted to

2D/3D play -back mode according to
the file name format

SIDEbySIDE

All files are played in Side-by-Side

mode.

TOP&BOTTOM

All files are played in Top-and-Bottom

mode.

When EDID Limit is ON, 3D TV must be connected for converting 2D/3D mode.

Setting 3D file
3D Structure

File Prefix

Example

Side-bySide(Half)

3D_SxS_

3D_SxS_your_file_name.extension

Top-andBottom

3D_TnB_

3D_TnB_your_file_name.extension

In order to automatically convert 2D/3D mode, 3D format file must have filename format as below.

Generator recognizes output port in numbering order beggining from No.1 port and gives a
priority to a TV EDID connected to No.1 output port or other port most adjacent to it to play.
(applicable from firmware 1.50 ver.) Therefore, in case of displaying multiple TV Sets with
various model, you must connect relatively low-end model to No. 1 output port.

53

Image File Play Time Creation

1. You can set each JPEG image files play time.

2. Resolution is optimized in 1920 * 1080.
OSD Mode

( OSD Display is selectable in three modes.)

ALL MODE
Every OSD will be
displayed on default
setting.
SHOW MODE
As shown in left, 3 different
OSD are only displayed.
Efficient in Exhibition, etc.
SPECIAL MODE
It displays nothing.
Please, select it in
specified circumstance.

File Update Limit Setting

Function Limit

LEVEL 1
No file update limit

LEVEL 2
File update limit function (A
password required)

54

NETWORK
Possible to set IP Address and Subnet Mask. ( Address must be set to Static IP
address)
Visit to DigitalZones official website www.dzonei.com to download Network Client
Program and manual.

Press SETUP button to open SETUP menu.

Use LEFT/RIGHT direction keys to move to NETWORK

Use UP/DOWN direction keys to move to sub menu.

Press ENTER button to set sub menu selection.

Use direction keys to select desired settings

and press ENTER to save setting.
Press SETUP button to close the menu.

If you change the network is automatically rebooting.

55

USER Manual

Network Features

Dynamic IP assignment
(use in NFS, SAMBA, WAN 1 MIN, WAN 10 MIN,
WAN 1 HOUR)

Static IP assignment
(use in NFS, SAMBA, WAN 1 MIN, WAN 10 MIN,
WAN 1 HOUR)

Network feature deactivate

File share with Linux OS based system.

File share with Windows OS based system

( Detailed Info. : 56Page ~ 64Page)

Server connection cycle : 1 min, 10 min, 1hour.

( For particular information for the contents
server, please apply to our website.
(www.digitalzone.co.kr or www.dzonei.com)

If you select

without knowing the specific setting value, theres a possibility of

critical errors.

56

Chapter 5. User Interface Setting

How to use shared folder in Windows.

Possible to use shared folder with HD stream generator for updating files. In
order to use this function, select SAMBA of server connection part in Network
of Setup page.

Firewall check & setting

Firewall should be set in order to use shared folder like below.

1) In case of firewall off.

57

2) In case of firewall on.

58

Chapter 5. User Interface Setting

How to set shared folder (in case of using hub or router)

1) Select network in Set up menu and set up as below image.

IP number Input
Direction button
Upper number
number

/
lower

Cursor Move
Move cursor left to right or right to left

Value input select/cancellation

By pressing ENTER button, value input field will activated
or deactivated for input.
Static IP input(DHCP OFF) is allowed to use when DHCP doesnt work
properly (Case of using HUB). Normally, input value will automatically set by
selecting DHCP ON.

Set IP set up

To set up a static IP, input same value of your PCs network information as Subnet mask,
Gateway, DNS. For the lastly, input any different last 3 digit number of your PCs
current IP value to the Stream generators Set IP field

59

USER Manual

2) Please follow the order as shown the below images

3) IP information will be shown as image.
Please, input network value into Stream Generators Network set up field.

In case of that your PC is set up Auto IP address assignment, check your IP address
by using ipconfig command. And then, set server IP in set up page.
( 1. Click on Windows Start button.
2. Click Run menu.

3.Type cmd and click on OK button.
5. Possible to see your IP address. )

60

4. Type ipconfig and click on OK button.

Chapter 5. User Interface Setting

How to set shared folder (In case of using cross cable)

Select network in Set up menu and set up as below image by using direction
keys. (This mode can be used 1:1 connection only between HD stream
generator and PC)

61

USER Manual

Before Folder Sharing

Before set up folder share option, please check as below image for Use
simple folder sharing(Recommended) field.

62

Chapter 5. User Interface Setting

How to set up folder share

The shared folder in the PC must be named Share.
( Any folder would be good, named Share where they are. Root or subdirectory folder will be fine but not allowed to use duplicated name of Share.)

63

USER Manual

64

Chapter 5. User Interface Setting

Update through SAMBA Networking

1. Possible to SAMBA setup in Set up Menus Network setting.
2. Create new folder named as Share and setting folder share on your PC.
3. You can check sharing file on Stream Generators Update menu.
1. Update Menu
Press Update button will show update menu.

2. Select File Share

Use direction button to
select File Share.

3. Multi-Play List setting

Press List button will show play list window.
Use direction button to select Multi-Play List number
and press ENTER button will start updating to
designated play list.

4. Check designated file to update ( Available

multi-selection)
Press CHECK button on designate file.
(All files will be updated if you press ENTER button without file select.)

5. Update
Press Enter button to start updating.

65

USER Manual

FIRMWARE ( Version and model can be changed without notice.)

Press SETUP button to open SETUP menu.

Use LEFT/RIGHT direction keys to move to FIRMWARE.

Press ENTER button to set sub menu selection.

New
Version

Version
Model
Auto
Firmware

66

It will be displayed
new firmware version
in ODD or USB.
Update will be
processed if you
press enter button
on new firmware.

None
X.XX(version
NO.)
Exist

When there is no
upgradeable Firmware file.
When there is upgrade
Firmware
When there is other file(s)
other than Firmware

Shows current Firmware version.

Shows HD Stream Generator model name.
Automatically the newest firmware will be updated if CD or USB device
containing the newest firmware is connected during playing files

Chapter 5. User Interface Setting

Setting DATE & TIME

Set Date, time, power on/off function.

Press SETUP button to open SETUP menu.

Use LEFT/RIGHT direction keys to move to DATE & TIME..

Use UP/DOWN direction keys to move to sub menu.

Press ENTER button to set sub menu selection.

Use direction keys to select desired settings

and press ENTER to save setting

Press SETUP button to close the menu.

67

USER Manual

How to schedule Date & Time

Possible to schedule power ON/OFF time of HD stream generator.

Item selection : direction keys on remote control.

Selection & setting : ENTER button on remote control.
1. Select item by using
direction keys and make the
item ENABLE status.
2. Power On Time : Scheduling power ON time of HD stream generator.
3. Power Off Time : Scheduling power OFF time of HD stream generator.
If power is supplied between scheduled Power On
be automatically POWER ON and playing.

68

Off time, this device will

Chapter 6. Appendix

Troubleshooting 70
Precautions for the Installation of Generator 71
Specification 72

69

USER Manual

Troubleshooting
Error

Troubleshooting

No power.

Check power cord connection and confirm firm

connection.

File(s) is not playing.

Check file(s) in PLAY LIST.

No display on TV

Check power of TV.

Check input selection of TV.
Check TV and HD Stream Generator connection.

No audio.

Check if file play is in trick mode and set to PLAY

mode.
Check audio cable connection.
Press MUTE button on TV and HD Stream
Generator.

Remote
work.

control

Cannot update.

70

doesnt

Check angle and distance between remote control and

HD Stream Generator.
Change remote control battery.

Check CD/DVD disk content for TP file(s)

Normal DVD title cannot be played or updated.

Chapter 5. User Interface Setting

Precautions for the Installation of Generator

1. Use the enclosed adapter supplied by DIGITALZONE.
2. Check to see if the input/output HDMI cable is connected properly.
3. Reduce the resolution of the Generator when using it with a TV without Full HD support.
(Ex. 1080i)
4. If a part of the TV screen blinks or does not display, connect Port #5 of the Generator to
the HDMI splitter.
5. If it does not power on (stay red), deactivate Key Lock.
(Press

button while holding MENU button. -> Press Power

button. -> Make

sure it is powered on.)

6. If a DVD does not eject when the "EJECT" button on the remote controller is pressed,
press the button inside the hole on the front. (Use a pin or other sharp object.)
7. Do not disassemble or modify the product. The warranty is void if product is
disassembled or modified.
8. Turn the power off when not in use.

The screen does NOT display any picture.

1. Check that the HDMI input port on your TV matches the output port. (Use External Input
on your TV remote controller.)
2. Check the front LED lamp to make sure the Generator is running properly.
(During normal operation, the Power LED stays blue and the HDD LED blinks with only one
of 720p, 1080i and 1080p LED on.)
Updating Files (Contents)
1. You may not be able to update video contents other than those included in the Generator
due to compatibility issues.
2. Make sure DVDs and USB run properly before update. (Check for any scratches on
DVDs.)
3. Music CDs, DVD titles, Blu-ray titles and game CDs are not update

71

Specifications
OUTPUTS

[HVP-4012R/4012N]


HDMI 2ea, Component 1ea, Analog(S-Video,
Composite) 2ea
[HVP-4015R/4015N]


HDMI 5ea, Component 1ea, Composite 1ea
[HVP-4005R]


HDMI 5ea
[HVP-4004]


HDMI 4ea
[HVP-4008]


HDMI 8ea

HDD

SATA 160GB, 250GB

FORMAT

TS(MPEG-2), HDV(MPEG-2), WMVHD, VC-1,

H.264(MPEG-4),
AVCHD(MPEG-4), JPEG Files

DISPLAY

1080p(60,50,30,25,24), 1080i(60,50) 720p(60,50)

576p50, 480p60, NTSC(480i), PAL(576i)
Simultaneous output: HDMI+Component
Color space: RGB

AUDIO

MPEG,AC3
(up to Dolby Digital 5.1)
DTS, AAC -> Pass
through

FILE PLAY

MEDIA
LIST

STREAM &
FIRMWARE
UPDATE

MEDIA

YES

SETTING
REMOTE
(RS-232)
NETWORK
PROTOCOL
RECOVERY

72

YES

Analog : RCA(L+R)/1CH
(HVP-4012, 4015 Model)
Digital:
- Coaxial 1CH
- Optical 1CH(4012 Model)

HDD, ODD, USB, Network(LAN)

Multi play list, Selection for Copy media
Check/UnCheck, Move Up/Down
[HVP-4012R/N,4005R,4004,4008]


ODD(HVP4012R/4005R), USB, Network
[HVP-4015R/4015N]


ODD(HVP-4015R ), USB 2ea,
Network
Auto Upgrade available
Date&Time, Resolution On/Off, Factory default, RGB Level,
Auto changing refresh-rate, Network information, Server IP,
Slide Show Time for JPEG

YES

Control play list, Play control for serial remote

YES

NFS, Samba(CIFS), FTP

MEDIA

Built in flash memory

YES

Rescue Mode available from user input