Attach 9 - TECHNICAL FORMAT

Tender Title : Term Contract For General Electrical & Instrumentation Services at PP(M)SB
Tender No : PP(M)SB/01/10/2015/0001 (B)

Attachment 9
TECHNICAL PROPOSAL
CONTRACTOR's shall submit a technical proposal which MUST included the following information :
Company's Past Experience
CONTRACTOR
on Services at PP(M)SB
following information :
Tender Title : Term Contract For Electrical & Instrumentation Services at PP(M)SB
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9
RESUME OF PROPOSED PERSONNEL

1.
Name
: Norkam Bin Ibrahim
2. I/C No
:-
3.
Date of Birth
: 01st April 1967
4. Nationality
: Malaysia
5.
Qualification
Educational Qualification Degree In Electrical Power Engineering, MARA University Of Technology.

Professional Qualification Competencies -
6.
Previous Work Experience :
Employer/Client
Position & Job Performed Similar to the WORKS
Present
TECHNICAL DIRECTOR A&A DINAR SDN. BHD.

MANAGING DIRECTOR PARADIGM VENTURES
Managing the specialist project in extra high voltage
underground cable installation inclusive of cable system
design, consultancy, project management, cables failure
investigation, diagnostic test and pre-commissioning test.
Jan 2003 April 2006
PROJECT MANAGER POWER CABLES MALAYSIA SDN.BHD.

SHAH ALAM.
A joint venture Company between local major investor company,
LTAT and a world leader in cable manufacturing industries, Pirelli.
Manufacturing all type of cables such as aerospace, submarine,
automotive and power cable inclusive the ancillary and
accessories such as joints, terminations, link box, etc from MV to
500kV.
Responsible for sales turnover, margin, debtors, operation and
business development of Project Division with the sales value
around RM40mil/year and involve with local and oversea Utilities
Company, contractors and suppliers.
Some of project achievements
-Successful in Hong Kong and Macau Electricity
Company (CLP and CEM) for Power cables
and accessories supply worth about RM60mil
Yr. 2003-2005.
- Successful in Australia, Myanmar, South Africa,
Middle East for Power cables and accessories
supply worth about RM20mil
Yr. 2004-2006
- Successful of supply, design, install and
commissioning of 132kV underground cable from
UMS Substation to KK Northern Town Substation,
Kota Kinabalu. 2 x 10.8km. Total project value
RM40mil.
March 2006
Duration From - To
- Successful of supply, design, install and

commissioning of 132kV underground cable
- Interconnection between Powertron and
Sepanggar Bay Power Plant. 4 x .5km.
Total project value RM3.4mil.
April 2006
- Underground cable refurbishment for
Cameron Highland Hydro Power Plant.
LV, MV and 132kV cables. Project Value RM20mil
Jan 1996 Dec 2002
SENIOR PROJECT ENGINEER POWER CABLES ENGINEERING SDN. BHD.

SHAH ALAM.
A subsidiary of Power Cables Malaysia Sdn. Bhd. One of the
Malaysian major contractors in High Voltage underground
cable installation.
Responsible for underground cable project installation inclusive
design, install, testing and commissioning.
Some of the completion work
- Successful of design, supply, install and commissioning of
33kV underground cable distribution network for TNB. Quantity
>1,000km and value > RM200mil. Yr 1995-2003
- Successful of design, supply, install, testing and
commissioning of 132kV Underground cable Transmission Network
system for TNB. Qty >250km and value > RM100mil. Yr 19982003
commissioning of 11, 33 and 132kV underground cable for PSR 2,
Melaka project. Yr. 1997-1998
commissioning of 11, 33 and 132kV underground cable for
Petronas CUF Kerteh and Gebeng. Yr. 1999 2001
- Successfully repaired of leaking 132kV Transformer Cable
sealing end at PPM, Yr. 2001, TNBHQ 132kV SF6 cable
Termination, Yr. 2002.
- Successfully locate and repair underground cable
breakdown, Putrajaya 33kV cable, CUF 11kV PVC Cable, KLIA 33kV
and 11kV, PPM 132kV and 6.6kV. TNB 33 and 132Kv
Dec 1991 Dec 1995
MAINTENANCE ENGINEER (Electrical) SOUTHERN WIRE INDUSTRIES SDN. BHD. SHAH ALAM
Produce steel wires and rope such as pre-stress strand for
concrete beam and wire rope for crane.
Job responsibilities managing daily maintenance operation,
preventive maintenance, installation and commissioning of
new machines, energy conservation, plant upgrading
and improvement.
SOME OF UNDERGROUND CABLE BREAKDOWN INVESTIGATION
AND DIAGNOSTIC TEST EXPERIENCE
1. 132kV Underground cable from PMU JBCC to Larkin
- Cable joints failed sheath test Jan 1999
2. 132kV Larkin GIS Cable Sealing End Failure December 2000
3. 132kV Shah Alam North Outdoor Sealing End Failure Nov 2002
4. Petronas Penapisan Melaka, 132kV OISE Leaking June 2003
5. CUF Kerteh 11 & 33kV Cable Condition Monitoring
July 2002 June 2004
6. 132kV U/G Cable Water Tree Nov 2004
7. LRT 33kV underground cable system To carry out diagnostic
test, (Partial Discharge) October 2006
8. JOR Hydro Plant
- Hot spot at GT cable termination November 2006
9. 33kV ABC 3c 300sqmm, Tuaran to Kundasang 65,000m
- Multiple cable failure investigation August 2007
10. 132kV U/G Cable UMS-KKNT (2x10km) Joint failure. March 2008
11. Others Refer attachment
7.
Present Designation/Job
Designation or Position
8.
Job Description
Employer/Client
Courses/Training Assignments :
Date
Course/Training Title
Location
1991- 4, CIAST
Train The Trainer, Management Skills,
1994, IKM
Domestic electrical installation
1997, BICC Erith, U.K
Underground Cables and Accessories Technology
Underground Cable Installation, Fault Locating and Site Testing
Oil Filled\Submarine Cables and Accessories Technology
2000, BICC Erith, UK
U/G Cables Accessories Installation
2004, Pirelli-Milan, Italy
EHV Pre-mould Joints Installation
2009, Pfisterer Altdorf, Swiss Silicone Rubber Insulation Technology
EHV Transition Joint Installation
9.
Duration From To
Other Information CONTRACTOR wish to add :

.
.................................................................
Company Signature & Stamp
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Zakaria Bin Din
2. I/C No
711212-08-5431
3.
Date of Birth
: 12th December 1971
4. Nationality
: Malaysia
5.
Qualification
Educational Qualification Professional Qualification CABLE JOINTER UP TO 33Kv

Competencies PK-T-3-B-0003-2006
DATE: 19-06-2006
6.
Employer/Client
Duration From - To
1) FPT ENGINEERING SDN. BHD. (1991-2006)

- TNB Pudu Ulu Sub-station Transition Joint (Oil filled to XLPE) up to 33kV (Bruggs Cable)
- TNB Shemelin Sub-station Transition Joint (Oil filled to XLPE) Up to 33kV (Bruggs Cable)
- TNB Insan Jaya Sub-station- Transition Joint (Oil filled to XLPE) up to 33kV (Bruggs Cable)
- MODENAS Jointing and Termination work up to 33kV (ABB Kabeldon)
- LIMA Langkawi Jointing and Termination 11kV (Raychem)
- BP Malaysia Jointing and Termination up to 33kV (ABB Kabeldon)
- PATI Salak South Transition Oil filled XLPE 33kV (ABB Kabeldon)
- EPE Malaysia Joint and Termination up to 33kV (Pirelli)
- Zafas/UEM Lebuh Ampang Transition Joint Oil filled/XLPE 33kV (Bruggs Cable)
- TNBE 518/96 Langkawi, Submarine Cable Jointing and Termination 132kV (Fujikura Ltd)
- TNB 817/98 Putrajaya Jointing and Termination 33kV, (ABB & Pfisterer)
- TNB 6/98 University Malaya Jointing and Termination 33kV (ABB Kabeldon)
- Langgak Perkasa TNB Gelugor Sub-station Transition Joint 33kV (Bruggs Cable)
- TNBE L/O Termination End at Sultan Iskandar Power Station 275kV (ABB Energy)
- TNB 137/99 Putrajaya Distribution Network up to 11kV (Newtech)
- Malaysia LNG Bintulu Jointing and termination up to 33kV
- Gerbang Perdana, Johor 132kV jointing (CCC GmbH, Germany)
- SESCO, Sarawak Bintulu Kidurong 132kV (CCC GmbH, Germany)
- DUBAI UAE, GIS Termination 132kV (CCC GmbH, Germany)
- SESB, KK Penampang 132kV (CCC GmbH, Germany)
2) A&A DINAR/PARADIGM VENTURES (2006 PRESENT)
- PPU Mengelembu (Ipoh) Jointing and GIS Termination (Pfisterer)
- Tawau Sabah, - Jointing and Termination 33kV Raychem
- PPU, Desa Coalfields Termination 33kV GIS (Pfisterer)
- PPU Saujana Triangle Termination 33kV GIS (Pfisterer)
- PPU Magna Park Termination 33kV GIS (Pfisterer)
- PMU Sea Park Termination 11 & 33kV (Raychem)
- M-Steel Factory 11kV and 33kV (Raychem)
- PMU Pandamaran 33 & 11kV Jointing and Termination (Pirelli)
- PMU LARKIN 132kV Joint and Termination (Pfisterer)
- PMU Setulang 132kV Joint and Termination (Pfisterer)
- PMU Tampoi 132kV Joint and Termination (CCC GmbH)
- PMU Perling 132kV Joint and Termination (CCC GmbH)
- LRT Tmn Bahagia 33kV Termination (Prysmian)
- LRT Abd Hukum 33kV Joint and Termination (3M & Prysmian)
- LRT Wangsa Maju 33kV Joint and Termination (3M & Prysmian)
- CUF Gebeng 33kV Termination (Pfisterer)
- CUF Kertih 11kV Joint (3M)
- PMU Kapar 132kV Termination (Pfisterer)
- PMU Puchong Perdana 132kv Termination (Pfisterer)

- PMU Alor Star 132kV Termination (Pfisterer)
- PMU Kg. Lanjut 132kV Joint (Pfisterer)
- PMU Cyberjaya 132kV Termination (Pfisterer)
- PMU NUNI- 132kV Termination (Pfisterer)
- PMU Kerayong 33kV Termination (Raychem)
- PMU Gambang -11kV Termination (Raychem)
- PMU Tg. Batu 33kV Termination (Raychem)
- PMU Muazam 33kV Termination (Raychem)
- PMU Tangga Batu 132kV Termination (Pfisterer)
- PMU KL North 132kV Termination (Pfisterer)
- PMU Papan 132kV Termination (Pfisterer)
- PMU Southern Steel 132kV Joint & Termination (Pfisterer)
- PMU Sg. Pinang 132kV Joint & Termination (CCC GmBH)
7.
Designation or
Position
8.
Employer/Client
Duration From - To
Date
9.
Job Description
Location

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Amarjit Singh S/O Pritam Singh
2. I/C No
: 750318-05-5371
3.
Date of Birth
: 18th March 1975
4. Nationality
: Malaysian
5.
Qualification
: PWO
Educational Qualification : - SPM
Professional Qualification : 2010 - Safety And Health Officer (Department Of Occupational Safety And Heatlh).
2010 - Radiation Protection Officer Cert (Nuclear Technology Of Malaysia)
2009 - Wireman Class PW 4 (Energy Commisssion Of Malaysia)
2009 - Safety And Health Officer Cert (National Institute Of Occupational Safety And Health)
2009 - Tech Diploma In Electronic Engineering (The City And Guilds Of London Institute)
2008 - Tech Diploma In Electrical Engineering (The City And Guilds Of London Institute)
2008 - Tech Diploma In Engineering Fundamental (The City And Guilds Of London Institute)
2007 - Chargeman Class A4 (Energy Commission Of Malaysia)
2005 - Chargeman Class BO-2 (Energy Commission Of Malaysia)
2004 - Wireman Class PW 3 (Energy Commission Of Malaysia)
2001 - Chargeman Class AO (Energy Commission Of Malaysia)
1998 - Wireman Class PW 1 (Energy Commission Of Malaysia)
1996 - Sijil Juruteknik Perindustrian (National Technical & Industrial Engineering Certificate)
1995 - Sijil Kemahiran Malaysia-Intermediate Level (National Level Skill Certificate)
1994 - Sijil Kemahiran Malaysia-Basic Level (national Level Skill Certificate)
Competencies : -
6.
14.09.1998 - Wireman Class PW 1
Suruhanjaya Tenaga
REG No. : PW-T-1-B-2803-1998
02.05.2001 - Chargeman Class AO
Suruhanjaya Tenaga
REG No. : PJ-T-1-B-0761-2001
Suruhanjaya Tenaga
REG No. : PW-T-1-B--2005
23.05.2005 - Chargeman Class BO-2
Suruhanjaya Tenaga
REG No. : PJ-T-1-B-2005
16.01.2007 - Chargeman Class A4
Suruhanjaya Tenaga
REG No. : PJ-T-4-B-0004-2007
Suruhanjaya Tenaga
REG No. : PW-T-4-B-1244-2009
Employer/Client
Kejuruteraan Djaarum
Sdn Bhd
(Kuala Lumpur)

Electrical Technician
Co-ordinate in the planning & execution of projects at the KLIA
Airport Sepang, Shell Refinery-Port Dickson
Involved in the termination of low voltage LV switchboard &
bus-bar ducting
Study of implementation of Schematic Drawings for electrical
distribution panels, control systems.
Work on the underground cables
Involved in the installation, termination & testing of A/C motors
Supervision of Junior Electricians
Carry out daily Safety Briefing or Safety Toolbox Meeting
Low Frequency Injection test for underground cables.
Duration From - To
22.12.1995 - 23.09.1997
Praegitzer Asia
Sdn Bhd
Maintenance & Facilities Technician

Troubleshooting CNC and PLC type of machines
10.11.1997 - 18.08.1999
(Melaka)
Troubleshooting & monitoring all machinery breakdowns
Supervision of all the machinery/facility maintenance
- monitoring daily checklist for production machinery
- ensure all facilites machines such as air compressor chillers
AHU air handling unit, waste water treatment plant (WTP)
- Supervision of electrical low voltage switch room
- to run-up standby generator set (1500KVA)
Involved In the setting up of all new machines such as
- new piping line (for chemical, DI water & etc)
- air compressor line
- new piping line for power and control system
- mechanical adjustment & modification
Elentec Malaysia
Chargeman
Sdn Bhd
(Rembau)
Head of department
03.09.1999 - 28.12.2003
Supervision of all facilites technicians

Monitor every electrical system in the plant
Detailed post-mortem report on machinery failures
Conceptualization & implementation of blueprints (work chart
flow) in the facilities department following ISO 9001:2000
requirements
Official internal auditor for ISO 9001:2000 & ISO 14001:2004
Liaison person with government officials pertaining DOSH &
Suruhanjaya Tenaga matters
Sole liaison person with Electrical Consultants, Vendors,
Contractors for any project for the plant
Implementation of yearly preventive maintenance planning
Study & implementation of energy saving thru out the plant
Allocation of yearly financial budget
Maintain & service standby generator set
Monitoring of Electrical Swithboard servicing conducted by
certified external engineers once in every 2 years or when it
is necessary
Seowon Precision Glass
(M) Sdn Bhd
(Rembau)
Plant Chargeman Engineering Manager

Head of electrical department through out the plant
Responsible & authorised person for High voltage (11KV)
electrical system
Monitor sub-station for 11 KV in the plant premises
Monitoring on the 11KV switch gear room - 7 nos
Monitoring on the 11 KV / 415 - 2 unit of 1250 KVA cast resins
air cooled transformers 2000 KVA oil colled transformer
Monitoring on low voltage switch room
6 units of main switchboard (MSB)
supervision of all facilites technicians
Monitor every electrical system in the plant
Detailed post-mortem report on machinery failures
Conceptualization & implementation of blueprints
(work chart flow) in the facilities department following
ISO 9001:2000 requirements
Official internal auditor for ISO 9001:2000 & ISO 14001:2004
Liaison person with government officials pertaining DOSH &
Suruhanjaya Tenaga matters
Sole Liaison person with electrical consultants, vendors,
contractors for any project for the plant
Implementation of yearly preventive maintenance planning
Study & implementation of energy saving thru out the plant
Allocation of yearly financial budget
Maintain & service standby generator set
Monitoring of electrical swithboard
30.12.2003 - 27.08.2008
Responsible & liaison person in

installationtooffactory
high tech
machines
such as
Reporting
director
on safety
tamglass
machine
fromand
Thailand
committee
action plan
implementation and accident reports in
the plant
7.
Designation or
Position
Chargeman
Job Description
Employer/Client
External electrical advisor as per request by the management.
Duration From - To
15.09.2008 - Present
More towards to power systems such as transformers, HV motors

drivers, switch breakers and etc
Advising on safety and health matters as per request by thirt
party. Promoting safety awareness and etc
Competent electrical service personal for
PETRONAS Penapisan Melaka (PPM). Inspection on the mobile
Geenrator-Sets and report to Suruhanjaya Tenaga
(ENERGY COMMISION MALAYSIA)
Familiar with API, ANSI, IEC, IEEE codes and hand-on with
Electrical Instrumentation such as PLC, DCS and SCADA system
for the Oil & Gasfield
8.
Date
9.
Location

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Karuppanan A/L Vyapurey
2. I/C No
3.
Date of Birth
: 07th February 1955
4. Nationality
5.
Qualification
Educational Qualification : MCE

Degree in Computer Science &Information System, UTM
Professional Qualification : 28.10.2002 - Offshore Safety Orientation
29.10.2002 - Basic Personal Survival at Sea and Helicopter Underwater Escape Training
Competencies : Chargeman B4
6.
Employer/Client
Accurate Networks
Systems Integration Sdn.

Training System Engineer
Configuring network system using cisco and sun sparc computer on solaris 7.
Maintaining and servicing sun sparc and sun ultra2 at Penang Port Sdn Bhd.
Configuring Sun Enterprise 4000 and 6000 servers.
Asaga Corporation Sdn. Bh Supply man power for culvert pump system
Do maintenance and servicing of culvert pump system.
Study the system and carry out necessary rectification
Asaga Corporation Sdn
7.
Fully incharge for Quick Release Hook (QRH) Refurbishment Work and responsible for all ins
Reporting to project management weekly, monthly progress report and liase with client.
Responsible for instrument & electrical pre-plan work and schedule of execution.
Designation or
Position
Chargeman BO
Project Engineer
Job Description
Responsible for all electrical maintenance (PM/CM) works for
33KV/6.6KV/11KV and 415V/240V power and lighting, lightning
protection & grounding systems & motor control
Organize construction team for construction/cabling & scaffolding
Reporting to project management weekly, monthly progress report and liase with client.
Fully incharge for culvert pump installation project PSR 1 & PSR
2 and responsible for all instrument and electrical work for 2002
& 2003 shutdown
Part of management committee for selecting a vendor instrumentation works.
Instrument representative during shutdown coordination meeting
among all contractors management team.
Updating construction As Built drawing.
8.
Date
9.

.
.................................................................
t PP(M)SB
ONNEL
550207-10-5261
Malaysian
er Underwater Escape Training
Duration From - To
4. Nov 99 to Jan 2000

omputer on solaris 7.
nang Port Sdn Bhd.
3. Feb 00 to Dec 2000
Jan 01 to Dec 01
ent Work and responsible for all instrument at Jetty area.
ress report and liase with client.
d schedule of execution.
Employer/Client
Duration From - To
Asaga Corporation
Sdn Bhd
(Paka, Terengganu)
Feb 04 - Present
ress report and liase with client.
strumentation works.
Location
..................................................
Signature & Stamp
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Mohd Rashid Bin Man
2. I/C No
: 670103-11-5277
3.
Date of Birth
: 03th January 1967
4. Nationality
: Malaysian
5.
Qualification
Educational Qualification : MCE

Institut Latihan Belia
Professional Qualification : 28.10.2002 - Offshore Safety Orientation
29.10.2002 - Basic Personal Survival at Sea and Helicopter Underwater Escape Training
Competencies : 05.03.2002 - Chargeman BO
6.
Suruhanjaya Tenaga
REG No. : PJ-T-6-B-0016-2002
Employer/Client
Wahab Elektrik
(Kuala Terengganu)

Wireman
3 Phase and Single phase wiring and installation for domestic and
industrial
Duration From - To
1989 - 1990
Preventive maintenance for Fire Alarm System

Perwaja Steel
(Kemaman)
Perform PM/CM on lighting, motor, lighting protection, switch

board, breaker & others
1990 - Feb 2004
Handling daily activities for Electrical Department

Supervise all works in the sub-station for 33/6.6/11 KV & 415V/240V
power and lighting, motor control center, lightning &
grounding systems
7.
Designation or
Position
Chargeman BO
Job Description
Responsible for all electrical maintenance (PM/CM) works for
33KV/6.6KV/11KV and 415V/240V power and lighting, lightning
protection & grounding systems & motor control
Supervise all electrical activities, maintenance and servicing.
Employer/Client
Asaga Corporation
Sdn Bhd
(Paka, Terengganu)
Duration From - To
Feb 04 - Present
8.
Date
9.
Location

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Mohd Azizul bin Ramli
2. I/C No
3.
Date of Birth
: 09th September 1979
4. Nationality
5.
Qualification
Educational Qualification : SPM

Certificate in Electrical Domestic &
Industry, MLVK
Professional Qualification : -
Competencies : 09.09.1979 - Chargeman A 0
6.
Suruhanjaya Tenaga
Employer/Client
Felda Palm Industries Sdn Technician

Sungkai Perak
Maintenance for all electrical system for such as Generator, transformer,
bus-bar, power distribution panel, lighting and inspection.
Fabrication and Installation of conduit, trunking and wiring.
Maintenance of motor such as D.O.L, Star Delta and Motor Resistance.
Maintenance and overhaul of Single & Three Phase motor and servicing of A.C.B, Altern
Assist on maintenance of Turbo Alternator Generator ( Steam System )
625 KVA and 188 KVA Diesel Generator and Synchronizing system.
7.
Designation or
Position
Job Description
Perform all electrical work and wiring ( incl. Termination and testing
Fabrication of support such as conduit, tray and ladder.
Interwiring in MCB between DCS and Marshalling rack.
Tecnician
Servicing 415 V Transformer, Bus Bar Distribution Board,

Installation of GT field instrument such as Fire/Fighting, vibration,
thermocouple & Ignitors, AC/DC Motor & Breaker maintenance for
single and three phase (415V) . Alstom , K. Langat Power Plant.
General maintenance.
8.
Date
9.

.
...............................................................
t PP(M)SB
ONNEL
790909-11-5301
Malaysian
REG No. : PJ-T-1-B-1208-2001
Duration From - To
July2000 - Dec2000
tor, transformer,
or Resistance.
r and servicing of A.C.B, Alternator and Diesel.
team System )
Employer/Client
Duration From - To

Bhd
Alstom
Location
2002 - Present
..................................................
Signature & Stamp
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Roslan bin Abu Bakar
2. I/C No
3.
Date of Birth
: 23th November1980
4. Nationality
5.
Qualification

Certificate in Institute Kemahiran MARA,
Besut, Terengganu.
Competencies : 23.11.1980 - Wireman PW4
6.
Suruhanjaya Tenaga
Employer/Client
Rotary Mec (M) Sdn Bhd
LRCC
Asadra (M) Sdn Bhd

- Titan Cracker 2 Project

Electrician
Termination of Lighting Cable.
Installation of Switchgear & MCC at Substation
Electrician
Termination work at JB and Field Instrument.
Main and secondary cable laying.
System cable laying and termination in MCB
Installation of Conduit to JB
Support Fabrication
Perfect Guildeline Sdn Bhd Electrician

Responsible in handling site project.
Familiar with credit evaluation, testing and installation.
Experienced working overtime and meeting deadlines
Shah Electric Sdn Bhd
Electrician
preparation for electrical facilities,
Responsible in all Electrical PM work at area 4.
meggering and servicing.
Involve in Shutdown work Phase 1/2/3 year 2000
7.
Designation or
Position
Wireman
Job Description
Incharge of all wiring for Electrical & Instrumentation works at

PPMSB , PSP, Kualiti Alam and others.
Termination work.
General maintenance.
Street lighting and trouble shooting.
Industrial and Dosmatic wiring Single & Three Phase
8.
Date
9.

.
...............................................................
t PP(M)SB
ONNEL
801123-11-5271
Malaysian
REG No. : PW-T-4-B-1031-2001
Duration From - To
Feb1999 - Dec1999
1999 - 2000
Jan 2000 - Jun 2000
Jul 2000 - Oct 2001
Employer/Client
Duration From - To

Bhd
Location
2001 - Present
..................................................
Signature & Stamp
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Mat Sukry Bin Junos
2. I/C No
3.
Date of Birth
: 04th February 1977
4. Nationality
5.
Qualification
Educational Qualification : SPM, Akademi Binaan Malaysia ( CIDB )

Akademi Binaan Malaysia ( CIDB )
Professional Qualification : Safety and Health Induction Course for Construction Workers.
Competencies : Chargeman A 1
6.
Suruhanjaya Tenaga
Employer/Client
ATY Ethylene (M) Sdn
Bhd

Technician
Assist team leader in installation switchboard.
Electrical wiring works
Inspection and maintenance of motor starter.
Installation of power supply Y Unit (UPS)
Assistant technician in drawing matters.
Laying cable manpower
Installing MCC panel
Petronas Penapisan
Terengganu Sdn Bhd
(GPP A)
(GPPA)
Petronas Penapisan
Terengganu Sdn Bhd
Technician
Lay cable
Glanding cable
Install FM 200 cylinder, panel, smoke & heat detector system
including;
Remove all Hulon cable, cylinder and panel
Continuity test
Testing and commissioning
Technician
Lay cable (power cable)
Glanding cable
Continuity test
Install MCB panel (New)
Shah Electric (M) Sdn

Bhd
Technician
Overhaul GM motor
Maintenance of MOV 9motor operative valve
Maintenance & service of generator (11 KVA
Testing & commissioning of motor siren
Continuity test of cable motor
Checking & repair street lightning
Laying cable for lighting CRU
PSI (Previous service inspection of fire alarm system
Petronas Carigali
Platform
Technician
Glanding Cable
Modification flood light panel
Termination
7.
Designation or
Position
E & I Supervisor
Job Description
Experienced in underground and overhead wiring for TNB
Experienced and familiar in electrical trouble shooting and
maintenance.LV
& HV
up To
33 KV Including:Ex- Lighting fitting
andEquipment
power source
(Hazardaous
Area)
Switchgear and protection module
Transformer up to 33KV
LV/HV Generator synchronous machine.
HV/LV Sync./Async. Motor (overhaul and etc..),. Electric pump etc.
Capacitor Bank
Desalter system
Termination work.
Checking & testing the structure resistance for PSR 1 & 2.
Tighten gland packing, perform stroke check on control

valve, calibrate local indicator, check limit switch, perform
instrument signal isolation, replace transmitter, remove
control valve from pipeline, remove control valve actuator,
calibrator pressure flow, temperature, level, performing

calibration on gas detection system, verify instrument tag
number, perform instrument cable continuity check, fill in daily
work log book, calibrate single & interface type displacer etc
at Petronas Penapisan Melaka.
8.
Date
9.

.
.................................................................
t PP(M)SB
ONNEL
770204-03-5979
Malaysian
REG No. : PJ-T-2-B-0039-2010
Duration From - To
Jan-01
Oct. 99 to March. 00
00 to May. 00
Mar. 01 to May. 01
Employer/Client
ASAGA CORPORATION
SDN BHD
/Petronas Penapisan
(Melaka) Sdn Bhd.
Alstom
Duration From - To
20 Mar 2002 to
Present
Location
..................................................
Signature & Stamp
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Abdul Hamid Bin Ayub
2. I/C No
: 630907-03-5575
3.
Date of Birth
: 07th September 1963
4. Nationality
: Malaysian
5.
Qualification
Educational Qualification : -
6.
REG No. : PJ-T-2-B-0269-2003
Employer/Client
Elect. Tech.
Syarikat Seleamat Kalil
sdn
Bhd. Penapisan
/Petronas
(Melaka) Sdn Bhd.
7.
Suruhanjaya Tenaga

maintenance.LV
& HV
up To
andEquipment
power source
(Hazardaous
Area)
Capacitor Bank
Desalter system
Heater system for industry.
Experianced in trouble shooting amd maintenance for electrical
system
including;
Uninterruptible
power supply (Alcade/Gutor/FIAMM)
Duration From - To
Nov 2002 - Ma6 2006
Designation or
Position
Job Description
Employer/Client
Elect. Tech.
ASAGA CORPORATION
Attached to Area 5

maintenance.LV
& HV
up To
andEquipment
power source
(Hazardaous
Area)
SDN BHD
/Petronas Penapisan

(Melaka) Sdn Bhd.

Capacitor Bank
Desalter system
Carry out maintenance work in Sub-station
Troubleshoot and repair work for electrical equipment.
Duration From - To
Mar 2006 to
Present
8.
Date
9.
Location

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Abdul Halim Bin Ahmad
2. I/C No
3.
Date of Birth
: 16th May 1964
4. Nationality
5.
Qualification
Competencies : -
6.
Employer/Client
Snr. Elect. Tech.
sdn
Bhd. Penapisan
/Petronas
(Melaka) Sdn Bhd.
7.

maintenance.LV
& HV
up To
andEquipment
power source
(Hazardaous
Area)
Capacitor Bank
Desalter system
system
including;
Uninterruptible
Designation or
Position
Snr. Elect. Tech.
Attached to Area 3
Job Description
maintenance.LV
& HV
up To
andEquipment
power source
(Hazardaous
Area)

Capacitor Bank
Desalter system
8.
Date
9.

.
...............................................................
t PP(M)SB
ONNEL
640516-06-5899
Malaysian
Duration From - To
Nov 2002 - Mar 2006
Employer/Client
ASAGA CORPORATION
SDN BHD
/Petronas Penapisan
(Melaka) Sdn Bhd.
Duration From - To
Mar 2006 to
Present
Location
..................................................
Signature & Stamp
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Rosli Bin Ibrahim
2. I/C No
3.
Date of Birth
: 10th Dec 1970
4. Nationality
5.
Qualification
Competencies : -
6.
Employer/Client
Shah Electric &
Instrument
Engineering S/B

Manpower Supply to Petronas Penapisan (Melaka) Sdn Bhd
Assistance to PPMSB's Electrical Technician for;
Installation and maintenance of power & lighting system, motor
starter,
public address
system
motor overhaul.
Troubleshoot
and repair
workand
for electrical
equipment.
Assisting in preventive maintenance work on MCC for LV and HV.
Carry out preventive maintenance for motor operated Valve (MOV) Rotork - Consist of;
Actuator model A-range and IQ Series
7.
Designation or
Position
Area 4
Job Description
Maintenance work for Area 4 at PPMSB

Carry out preventive maintenance for motor operated Valve (MOV)
Rotork
- Consist
of;
Actuator
model A-range
and IQ Series
Master Station Pakscan
Monitoring system Pak Version

starter, public address system and motor overhaul.
8.
Date
9.

.
...............................................................
t PP(M)SB
ONNEL
701210-04-5293
Malaysian
Duration From - To
1996 to 2002
alve (MOV) Rotork - Consist of;
Employer/Client
Asaga Corporation
Sdn Bhd
Petronas Penapisan
Duration From - To
2006 - Present
(Melaka) Sdn Bhd
Location
..................................................
Signature & Stamp
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Azmi Bin Alias
2. I/C No
3.
Date of Birth
: 30th October 1985
4. Nationality
5.
Qualification

Competencies : -
6.
Employer/Client
Electrician
sdn
Bhd. Penapisan
/Petronas
(Melaka) Sdn Bhd.
7.

maintenance.LV
& HV
up To
andEquipment
power source
(Hazardaous
Area)
Capacitor Bank
Desalter system
system
including;
Uninterruptible
Designation or
Position
Electrician
Attached to Area 1
Job Description
maintenance.LV
& HV
up To
andEquipment
power source
(Hazardaous
Area)
Capacitor Bank
Desalter system
General maintenance
8.
Date
9.

.
...............................................................
t PP(M)SB
ONNEL
850730-10-5375
Malaysian
Duration From - To
Nov 2005 - Mar 2006
Employer/Client
ASAGA CORPORATION
SDN BHD
/Petronas Penapisan
(Melaka) Sdn Bhd.
Alstom
Duration From - To
Mar 2006 to
Present
Location
..................................................
Signature & Stamp
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Mohd Shukri Bin Ismail
2. I/C No
3.
Date of Birth
: 02nd Apr 1987
4. Nationality
5.
Qualification
Competencies : -
6.
Employer/Client
Bumi Emas Sinar Niaga
7.

Electrician
Intallation high voltage line 11kV overhead and underground
for TNB project
Wiring and installation building electrical system
Factory machine installation and maintenance
Plumbing installation and maintenance
Designation or
Position
Electrician
Area 4
Job Description

Carry out preventive maintenance for motor operated Valve (MOV)
Rotork
- Consist
of;
Actuator
model A-range
and IQ Series
Master Station Pakscan
Monitoring system Pak Version

starter, public address system and motor overhaul.
8.
Date
9.

.
...............................................................
t PP(M)SB
ONNEL
870402-30-5069
Malaysian
Duration From - To
2007-2008
Employer/Client
Asaga Corporation
Sdn Bhd
Petronas Penapisan
Duration From - To
2008 - Present
(Melaka) Sdn Bhd
Location
..................................................
Signature & Stamp
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Azizi Bin Mat Zin
2. I/C No
3.
Date of Birth
: 20th Oct 1980
4. Nationality
5.
Qualification

Safety and Health Induction Course for Construction Workers
Competencies : -
6.
Employer/Client
Petronas Penapisan
(Terengganu) Sdn Bhd
(GPP
GPPA A)
Petronas Carigali
ATY Ethylene (M) Sdn

Bhd

Electrician
Lay cable (power cable)
Glanding cable
Install FM 200 cylinder, panel, smoke & neaf detector
Remove all halon cable, cylinder and panel
Continuity test
Install MCB panel (new)
Overhall GM motor
Maintenance of MOV motor operative valve
Maintenance & service generator (11 KUA)
Checking & repair street lighting
PSI (Previous service inspection of fire alarm system)
Electrician
Lay cable and glanding cable
Fabricate support for gas detector
Continuity test
Electrician
Assist team leader in installing switch board
Electrical wiring works
Inspection and maintenance of motor starter

Installation of power supply unit (PSU)
Assisting technician in drawing matters
Laying cable & manpower
Assisting technician in drawing matters
7.
Designation or
Position
Electrician
Job Description
Fabrication of support such as conduit, tray and ladder

Termination work.
Checking & testing the structure resistance for PSR 1 & 2.
Servicing 415 V Transformer, Bus Bar Distribution Board
Installation of GT field instrument such as Fire/Fighting,
vibration, thermocouple & Ignitors, AC/DC Motor & Breaker
maintenance for single and three phase (415V)
8.
Date
9.

.
...............................................................
t PP(M)SB
ONNEL
801020-03-5121
Malaysian
Duration From - To
1999-2000
Sept2000 - Nov2000
2000-2001
Employer/Client
Duration From - To
Asaga Corporation
Sdn Bhd
Alstom
2002 - Present
Location
..................................................
Signature & Stamp
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Mohd Shaaril bin Mohd Idris
2. I/C No
: 831010-11-5141
3.
Date of Birth
: 10th October 1983
4. Nationality
: Malaysian
5.
Qualification
Educational Qualification : Industrial Training Institute (JTM)

SPM
PMR
Competencies : -
6.
Employer/Client
Duration From - To
Asadra (M) Sdn Bhd
QC Electrician
Megger & continuity check cable lighting
Visual check cable glanding and termination at unit 53, 19
Complete motor solo run
Jan 2007 - Mar 2008
Ramunia Fabricator
Sdn Bhd
Instrument Technician
Testing & commissioning activity at supg-b, stroke test for SDV
& BDV
Carry out loop check for LP Gas Recovery, megger & continuity
check cable and paper work (check sheet)
Oct 2007 - Dec 2007
JM Power Sdn Bhd
Carry out trouble shooting of faulty field inst.
Feb 2006 - Mar 2007
Perform servicing, calibration and loop test of pressure and

flow transmitter
Nekad Development
Engineering Sdn Bhd
Aug 2005 - Dec 2005
Loop checking pressure transmitter, temp transmitter, flow

transmitter and control valve
Perform servicing, calibration and loop test of pressure
and flow transmitter
Mieco Chipboard Bhd
Responsible to overhauling, servicing, recalibrating testing
Sept 2003 - Nov 2003
and commissioning to all of the transmitter switches

Loop checking pressure transmitter, temperature transmitter
flow transmitter and control valve (fisher foxboro)
Asadra Timur Sdn Bhd
Junior Technician
July 2003 to end of project
Calibrate instrument to level displace transmitter, level relay,

pressure transmitter
Pair thermocouple
Clean level glass
Asadra Sanko (M)
Sdn Bhd
Perform servicing, calibration and loop test for
Oct 2002 - Jun 2003
Petronas MLNG
3 Plant,
Bintulu, Sarawak
Pressure Transmitter
Pressure Gauge
Flow transmitter
Measurement temperature
Element
Orientation valve
Impulse line and air line pipe pressure test
Continuity and insulation test for instrument cable
Asadra Sanko (M)

Sdn Bhd
MLNG 3 Plant (M)
Sdn Bhd
7.
Training Instrument Technician
July 2002 - Sept 2002
- Perform servicing, calibration and loop test of pressure and

flow transmitter
- Megger & continuity check cable instrument
Designation or
Position
Job Description
Maintain to PM jobs
Perform servicing, calibration and loop test for pressure, flow,
level displace temperature
To check & stroke valve for PSA unit
Calibrate instrument to level displace interface
transmitter
Melaka refinery PSR2 revamp project phase 1 completion
of RETA 2009/2010
- Instrument servicing, calibration & loop check
- Electrical work, cable pulling, termination, testing and
commissioning
- General electrical and instrument works
- Tighten gland packing, perform stroke check on control
valve, calibrate local indicator, check limit switch, perform
instrument signal isolation, replace transmitter, remove
control valve from pipeline, remove control valve actuator,
calibrator pressure flow, temperature, level, performing
calibration on gas detection system, verify instrument tag
number, perform instrument cable continuity check, fill in daily
work log book, calibrate single & interface type displacer etc
at Petronas Penapisan Melaka.
Employer/Client
Asaga Corporation
Sdn Bhd
Duration From - To
April 2008 - Present
8.
Date
9.
Location

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Mohd Zulkifli Bin Mamat
2. I/C No
: 821102-11-5465
3.
Date of Birth
: 02nd November 1982
4. Nationality
: Malaysian
5.
Qualification
Educational Qualification : Interprimant Diplomaent Institut (IBU)

Mechanical
Plant (1999
- 2000)
Industrial
Training
Institute
(ILP) (2001 2002)
Certificate in Instrument Technician
School and ILP Melaka
State - Terengganu (1996 - 1997)
Sek. Men. Padang Midin
PMR (1995 - 1997)
SPM (1997 - 1999)
Competencies : -
6.
Employer/Client
Duration From - To
Asadra (M) Sdn Bhd
QC Electrician
Jan 2007 - Mar 2008
Ramunia Fabricator
Sdn Bhd
Oct 2007 - Dec 2007
& BDV
JM Power Sdn Bhd
Feb 2006 - Mar 2007

flow transmitter
Nekad Development
Engineering Sdn Bhd

Aug 2005 - Dec 2005

Mieco Chipboard Bhd
Sept 2003 - Nov 2003

Junior Technician
Pair thermocouple
Clean level glass

Asadra Sanko (M)
Sdn Bhd
Petronas MLNG
3 Plant,
Bintulu, Sarawak
Oct 2002 - Jun 2003

Pressure Gauge
Flow transmitter
Element
Orientation valve
Asadra Sanko (M)

Sdn Bhd
MLNG 3 Plant (M)
Sdn Bhd
7.

July 2002 - Sept 2002
flow transmitter
Designation or
Position
(Fire Alarm / SGS)
Job Description
Fire Alarm System
- Perform corrective maintenance of instrument equipment
such as process instruments, package units, gas detection
system, fire alarm system
- Lead the troubleshooting and diagnose failure of Fire Alarm
system PSR 1 & PSR 2
- Troubleshooting on Fire Alarm Devices (MCP, SD, HD, UV, PS)
for PSR 1 & PSR 2 Fire Alarm
System (Apollo, Kidde, Ampac, Siemen, Autronica, Vesda)
- Perform modification on devices installation for Fire Alarm
Devices
- Perform Preventive maintenance on Sub Fire Alarm Panel PSR 1
PSR 2 (Apollo, Kidde, Ampac, Siemen, Autronica, Vesda)
- Perform proactive maintenance on Rimseal detection system
for tankage PSR1 & PSR2 Tank
- Assist BOMBA for Fire Certificate Petronas Penapisan Melaka
Sdn Bhd
- Perform Fire Alarm Testing for Deluge Valves System
Employer/Client
Asaga Corporation
Sdn Bhd
Petronas Penapisan
(Melaka) Sdn Bhd
Duration From - To
8.
Date
9.
Location

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Radzuan Bin Abu Zaid
2. I/C No
: 820324-06-5315
3.
Date of Birth
: 02nd March 1982
4. Nationality
: Malaysian
5.
Qualification
Educational Qualification : Industrial Training Institute (ILP) (2001 - 2002)

Certificate in Instrument Technician
Sek. Men. Keb. Temerloh
PMR (1995 - 1997)
SPM (1997 - 1999)
Competencies : -
6.
Employer/Client
Duration From - To
Asadra (M) Sdn Bhd
QC Electrician
Jan 2007 - Mar 2008
Ramunia Fabricator
Sdn Bhd
& BDV
Oct 2007 - Dec 2007
JM Power Sdn Bhd
Feb 2006 - Mar 2007
flow transmitter
Nekad Development
Engineering Sdn Bhd
Aug 2005 - Dec 2005

Mieco Chipboard Bhd
Sept 2003 - Nov 2003

Junior Technician
Pair thermocouple
Clean level glass
Asadra Sanko (M)
Oct 2002 - Jun 2003
Sdn Bhd
Petronas MLNG
3 Plant,
Bintulu, Sarawak

Pressure Gauge
Flow transmitter
Element
Orientation valve
Asadra Sanko (M)

Sdn Bhd
MLNG 3 Plant (M)

July 2002 - Sept 2002
flow transmitter
Sdn Bhd
7.
Designation or
Position
(Fire Alarm / SGS)
8.
Job Description
Do the preventive maintenance (PM) remote operation valveAsaga Corporation

- Overhall, service & calibration control valve (PPM workshop)
Sdn Bhd
- Calibrate pressure switches and pressure gauge
Duration From - To
Date
9.
Employer/Client
Location

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Kamalruzaman Bin Ahmad
2. I/C No
: 740108-11-5293
3.
Date of Birth
: 10th January 1974
4. Nationality
: Malaysian
5.
Qualification
Educational Qualification SPM, Certificate in Fabricate Logam of IKM Besut, (Jan. 92 to Jan. 94)
Educational Qualification : Professional Qualification Professional Qualification : -
Competencies : -
6.
Employer/Client
Bachtel Bina
CUF Amonia
KR-2-Aromatic
Manjamas Timur
Sdn Bhd
Duration From - To
Instrument Fitter
Glanding Cable
Modification flood light panel
Glanding Cable.
Termination
Instrument Fitter
Overhaul GM motor
Maintenance of MOV 9motor operative valve
Maintenance & service of generator (11 KVA)
Checking & repair street lightning
PSI (Previous service inspection of fire alarm system.
Oct. 00 to Nov. 01
Instrument Fitter
Tubing, airline, cable tray
May. 99 to Feb. 00
Instrument Fitter
Lay cable
Glanding cable
Nov. 97 to Apr. 97
Mar. 00 to Oct 00
Install FM 200 cylinder, panel, smoke & heat detector

Remove all Hulon cable, cylinder and panel
Continuity test
EESB (M) Sdn Bhd
Instrument Fitter
Assist team leader in installation switchboard
Electrical wiring works.
May. 96 to Dec. 96

Rotary Mec (M)
Sdn Bhd
Instrument Fitter
Assist team leader in installation switchboard.
Electrical wiring works.
Apr. 95 to Aug. 95
7.
Designation or
Position
8.
Job Description
Instrument
Assisting Inst.tech in trouble shooting and repairing of the
Asaga Corporation
Fitter
electrical and instrumentation accessories including support and

termination inside junction boxes,Impulse line and power
distribution board.
Fabricated support for cable way and analyzer frame.
Sdn Bhd
Duration From - To
April 2008-Present
Date
2/1/1994
9.
Employer/Client
Location
SWAGELOK VALVE TUBING & FITTING AND SAFETY VALVE
Swagelok

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: MOHD AZAMI MAT DIN
2. I/C No
: 730102-11-5111
3.
Date of Birth
: 02nd January 1973
4. Nationality
: Malaysian
5.
Qualification
Educational Qualification : Educational Qualification SPM, Certificate in Fabricate Logam of IKM Besut, (Jan. 92 to Jan. 94)
Professional Qualification Professional Qualification : -
Competencies : -
6.
Employer/Client
Bechtel bina (M)
Sdn Bhd
(Optimal
Chemicals, Butanol
& Derivatives
Project)
Toyo Engineering
Corporation
(KR 2 Aromatic
PPTSB)
7.
Duration From - To
Instrument Fitter
Involved in construction and layout cable trays, conduit, support
and installation of copper & stainless steel tubings for
instrumentation installation.
Involved in installation of junction box incl. fabricated support.
Sep 00 - Oct 01
Instrument, Electrical & Tube Fitter

Involved in instrument division construction.
Assist team analyzer in constructing 8 analyzer houseses.
Involved in construction and layout cable trays, conduit,
support and installation of copper & stainless steel tubings .
for instrumentation installation.
May 99 - Apr 00
Designation or
Position
Job Description
Employer/Client
Instrument
Assisting Inst.tech in trouble shooting and repairing of the .
Asaga Corporation
Fitter
electrical and instrumentation accessories including support and

termination inside junction boxes and power distribution board
Sdn Bhd
Petronas Penapisan
(Melaka) Sdn Bhd
Duration From - To
8.
Date
2/1/1994
9.
Location
SWAGELOK VALVE TUBING & FITTING AND SAFETY VALVE
Swagelok

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Mansor Bin Mat Ail
2. I/C No
: 830510-03-5717
3.
Date of Birth
: 10th May 1983
4. Nationality
: Malaysian
5.
Qualification
Educational Qualification : Industrial Training Institute (ILP)

SKM 1 & 2 (2006 -2007)
Maahad Muhammadi, Tanah Merah
PMR (1996 - 1999)
SPM (2000 - 2001)
Competencies : -
6.
Employer/Client
Res Engineering
Sdn Bhd
(HPP Crude Tank
Petronas Penapisan
(Melaka) Sdn Bhd
Trainee Technician
i) Perform installation and commissioning new power transformer
for SS 7. Tasks including :
- System wiring and troubleshooting
- Cable meggering for LV and HV
- Execute system test : Earthing, Continuity, Polarity
- Perform LV/HV cable glanding and termination
PSR 2 Revamp &

Turnaround
Unit 30,
Petronas Penapisan
Assist on Field Instrument installation including :- Cable pulling

- Instrument hook-up
- Cable termination
(Melaka) Sdn Bhd
- Nuclear Level Calibration

ii) Execute on new loop testing
Loop continuity
Functional test
I/O test
iii) Support unit start-up/commission
Perform function test and commission
RTD and thermocouple
Flow, pressure and level transmitter
Function check of control valve, shutdown
valve
Loop test
Smith turbine meter
iv) Assist analyzer group for unit Turn Around
To service and calibrate O2 analyzer
Duration From - To
7.
Designation or
Position
(TGS, Metering &
Communication
Job Description
i) Tank Gauging System
Perform Preventive Maintenance & Corrective Maintenance
for the system
Section)
Installation, commissioning and troubleshooting on the
system using E&H Proservo, E&H GWR and E&H FMR - 130,
FMR-240, FMR-532 Radar Gauge, SAAB Emerson RTG 3930.
Maintain and troubleshoot the Tank Gauge System using VI
Protocal, Sakura Endress MDP-II System, E&H Tank Computer
ii) Metering
Perform preventive maintenance & corrective maintenance
for the system
Maintain and service brooks turbine, GE ultrasonic, micro
motion coriolis, brodie positive displacement (PD) flow meter
Assist on execution of meter proving for custody transfer
activities using OMNI flow computer, brooks and calibron
compact prover
iii) Communication
Perform preventive maintenance & corrective maintenance
for the system
Assist and commission MOTOROLA digital radio trunking system
migration project for Petronas Penapisan Melaka PP(M)SB
Installation, commissioning and troubleshooting on TETRA
system, MTP750 and MTP850Ex portable/MTM800 mobile/fix
radio
iv) Access Control System
Perform preventative maintenance & corrective maintenance
for the magnetic control system
To assist on rectification work for any related issues
Employer/Client
Asaga Corporation
Sdn Bhd
(Masjid Tanah, Melaka)
Duration From - To
April 2008 - 2010
8.
Date
9.
Location

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Mohd Hapis Bin Abd Hamid
2. I/C No
: 691226-01-5551
3.
Date of Birth
: 26th December 1969
4. Nationality
: Malaysian
5.
Qualification
Educational Qualification : June 2009 - Suruhanjaya Tenaga Certificate

May 1991 - Diploma in Mechanical Engineering
May 1987 - Sijil Pelajaran Malaysia (SPM)
December 1984 - Sijil Rendah Pelajaran Malaysia (SRP)
6.
Suruhanjaya Tenaga
REG No. : PJ-T-2-B-0456-2009
Employer/Client
Duration From - To
National Semiconductor
Melaka
Senior Technician
Helping production and minimize the damages which cause the
productivity and quality, trouble shooting mechanical, electrical
and electronic faulty.
Maintain quality and value over rejection
Able to handle testing and visual equipment such as
Microvision 851, 480 and 485
Penta Master vision, tets aetrium AEMS, symtek 300, 500
and tester teradyme J273, A360
1991 - 2005
Syarikat Selamat Khalil

Sdn Bhd
Electrician (Contract with Petronas Penapisan Melaka Sdn B

Audit for grounding, lightning arrestor, cathodic protection
2005 - 2006
system, general preventive maintenance for both HV and LV

transformer, HV and LV breakers, cathodic protection,
electrical motors, street lighting, generators as well as other
general maintenance.
Electrical tools inspection
7.
Designation or
Position
Electrician
Job Description
Audit for grounding, lightning arrestor, cathodic protection
system, general preventive maintenance for both HV and LV
transformer, HV and LV breakers, cathodic protection,
electrical motors, street lighting, generators as well as other
general maintenance.
Electrical tools inspection
Employer/Client
Petronas Penapisan
(Melaka) Sdn Bhd
Duration From - To
2006 - 2010
8.
Date
9.
Location

.
.................................................................
Tender No : PP(M)SB/01/10/2015/0001 (B)
Attachment 9

1.
Name
: Syaiful Haq Bin Mohamad
2. I/C No
: 631224-71-5111 (8514884)
3.
Date of Birth
: 24th Dec 1963
4. Nationality
: Malaysian
5.
Qualification
Educational Qualification : 1970 - 1972 ( SMP ) atau (SRP) pangkat A Sekeloh Menegah Pertama - Indonesia
- 1973 - 1976 (SMA) atau (SPM) pangkat A Jurusan Sains Sekeloh Menengah Atas - Indonesia
Competencies : -
6.
Employer/Client
Shah Electric &
Instrument
Engineering S/B

Manpower Supply to Petronas Penapisan (Melaka) Sdn Bhd
Duration From - To
1997 to 2002
Assistance to PPMSB's Electrical Technician for;

starter,
publicand
address
and
motor overhaul.
Troubleshoot
repairsystem
work for
electrical
equipment.
P.D Tai Ming Sdn Bhd
Electrical Supervisor (Project)

Petronas Penapisan (Melaka) and Sheel Refinery Port Dickson Project
;
Responsible
in supervising all installation work and manpower
safety aspect for both project.
1991 to 1996
Shapadu Engineering
Sdn Bhd / P.T Rekayasa
Senior Electrical & welding

Pertamina - Riau Project
1984 to 1990
Carry Out welding and cable & single and three phase installation.
Tai Ming Electronics LTD. Operator / Electrician
Tempeenis Singapore
Carry out electrical installation for distribution box and panel.
7.
1980 - 1983
Designation or
Position
Area 4
Job Description
Employer/Client
Asaga Corporation
Sdn Bhd
(Masjid Tanah, Melaka)
Petronas Penapisan
(Melaka) Sdn Bhd
Duration From - To
April 2008 - 2010
8.
Date
17th June 2003
9.
Location
Operation, Safety & Maintenance Course of Haulotte H21TX Aerial

Platform
Swagelok

.
.................................................................

Attach 9 - TECHNICAL FORMAT

Uploaded by

Copyright:

Available Formats

Attach 9 - TECHNICAL FORMAT

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Attach 9 - TECHNICAL FORMAT

Uploaded by

Copyright:

Available Formats

Tender Title : Term Contract For General Electrical & Instrumentation Services at PP(M)SB

Tender No : PP(M)SB/01/10/2015/0001 (B)

RESUME OF PROPOSED PERSONNEL

: Norkam Bin Ibrahim

: 01st April 1967

Educational Qualification Degree In Electrical Power Engineering, MARA University Of Technology.

Previous Work Experience :

Position & Job Performed Similar to the WORKS

TECHNICAL DIRECTOR A&A DINAR SDN. BHD.

Jan 2003 April 2006

PROJECT MANAGER POWER CABLES MALAYSIA SDN.BHD.

- Successful of supply, design, install and

SENIOR PROJECT ENGINEER POWER CABLES ENGINEERING SDN. BHD.

Dec 1991 Dec 1995

11. Others Refer attachment

Other Information CONTRACTOR wish to add :

RESUME OF PROPOSED PERSONNEL

: Zakaria Bin Din

: 12th December 1971

Educational Qualification Professional Qualification CABLE JOINTER UP TO 33Kv

Previous Work Experience :

Position & Job Performed Similar to the WORKS

1) FPT ENGINEERING SDN. BHD. (1991-2006)

- PMU Puchong Perdana 132kv Termination (Pfisterer)

Other Information CONTRACTOR wish to add :

RESUME OF PROPOSED PERSONNEL

: Amarjit Singh S/O Pritam Singh

: 18th March 1975

Educational Qualification : - SPM

14.09.1998 - Wireman Class PW 1

REG No. : PW-T-1-B-2803-1998

02.05.2001 - Chargeman Class AO

REG No. : PJ-T-1-B-0761-2001

23.05.2005 - Wireman Class PW 3

REG No. : PW-T-1-B--2005

23.05.2005 - Chargeman Class BO-2

REG No. : PJ-T-1-B-2005

16.01.2007 - Chargeman Class A4

REG No. : PJ-T-4-B-0004-2007

21.10.2009 - Wireman Class PW 4

REG No. : PW-T-4-B-1244-2009

Previous Work Experience :

Position & Job Performed Similar to the WORKS

Maintenance & Facilities Technician

Supervision of all facilites technicians

Plant Chargeman Engineering Manager

Responsible & liaison person in

External electrical advisor as per request by the management.

More towards to power systems such as transformers, HV motors

Other Information CONTRACTOR wish to add :

RESUME OF PROPOSED PERSONNEL

: Karuppanan A/L Vyapurey

: 07th February 1955

Educational Qualification : MCE

Previous Work Experience :

Position & Job Performed Similar to the WORKS

Other Information CONTRACTOR wish to add :

er Underwater Escape Training