Bomba Haskel..

PNEUMATIC DRIVEN LIQUID PUMPS
PERFORMANCE QUALITY RELIABILITY
Welcome to Haskel
Haskel is an international organization offering a worldwide service through
the Haskel group of companies and factory trained distributors. The Haskel
group is headquartered in Burbank, California, with facilities throughout the
world. We have built an enviable reputation for quality based on high pressure
fluid and gas handling equipment.
In addition to offering a comprehensive range of pneumatic driven liquid
pumps, air amplifiers, pneumatic and hydraulic driven gas boosters, high
pressure valves, fittings and accessories, we custom design and build power
pacs and test rigs. Our continued investment in technology ensures that
Haskel will stay at the leading edge of high pressure technology.
This brochure introduces our pneumatic driven liquid pump range. Technical
details and advice on any of the products shown is available on request.
We are here to solve your problems. Just give us a call at 818-843-4000 or visit
our website at www.haskel.com for more information or to locate a distributor.
Why Use Haskel Pneumatic Driven Pumps?

Our pumps offer many advantages over electrically driven pumps:
Safe pneumatic operation no heat, flame or spark risk
Up to 100000 psi (7000 bar) capability
Infinitely variable cycling speed
Stall feature at pre-determined pressure to hold that pressure
without consuming power
Problem-free stop/start applications
Easily automated many modification and control options
Suitable for most liquids and liquefied gases
Alternative gas drive options sour gas, natural gas,
boil off gases, nitrogen
Applications
include:
Pressure testing
Work holding/power clamping
Jacking/lifting
Valve actuator control
Hydraulic cylinder actuation
Press safety overload devices
Roller tensioning
Metering
Precision lubrication and
spraying
Liquified gas transfer
www.haskel.com
No need for air line lubrication saves costs and

prevents contamination
Robust, reliable, compact and easy to maintain proven design
Unbalanced cycling spool provides immediate response to
pressure changes
Also available in standard, or custom built power pac
configurations
Excellent worldwide service for spares and repairs
Can be manufactured to meet API 675, ATEX, CE and NACE
Pressure and Flow on Demand

This guide will help you to pre-select the pump ideally suited
for your application. If you have specific questions, however,
we urge you to provide us with details of the duties you require
from the pump, available air/gas drive pressure, and pressure/
flow requirements, and we will recommend a model and any
corresponding accessories.
Output Horsepower Ratings

The pumps are categorized on their horsepower ratings (see
pages 6-7). These are approximate and peak at 100 psi (7
bar), assuming adequate drive air, pressure and volume. Peak
horsepower is at about 75% nominal ratio x air drive pressure, i.e.
100:1 pump @ 100 psi air drive peaks at 100 x 100 = 10000 x 0.75 psi
= 7500 psi (517 bar) hydraulic pressure.
Double and Triple Air

Head Pumps
Performance can be extended by stacking air pistons without
changing the hydraulic piston. Haskel multi-head pumps consume
less air than competitive single head pumps of the same area, as
only one head is pressurized on the return stroke; e.g., on a 1.5 hp
pump additional heads can raise performance to 2 hp.
Double air head pumps are identified by the last digit 2 in the
pump model number. Thus, a nominal 50:1 ratio pump with two
air heads is described as a 52. Similarly, a triple air head pump is
identified with a last digit 3. Thus, a 900 ratio pump with three air
heads is described as a 903.
Operation
The pumps automatically reciprocate on a differential piston
principle. A large piston driven by relatively low pressure
drive acts directly upon a smaller hydraulic piston.
The nominal ratio between piston sizes is indicated in the
model coding and approximates to the maximum working
pressure. The actual ratio is about 15% above nominal so
that the pump continues to cycle when drive pressure equals
nominal ratio. Initially, the pump will cycle at maximum speed
acting as a transfer pump to pressurize downstream.
It will cycle at a slower rate as the fluid meets resistance
until it stalls at maximum output pressure. When a pressure
drop downstream occurs, it will recycle as necessary in
an effort to maintain maximum pressure. Stall pressure is
achieved when the outlet pressure rises and offers more
resistance to the reciprocating differential piston assembly.
The piston assembly then stalls when the forces balance, e.g.
when drive pressure x drive piston area equals outlet (stall)
pressure x driven hydraulic plunger area. The pump design
is sensitive to very small pressure drops due to the low
frictional resistance of the large diameter drive piston and
hydraulic piston seals.
Single Drive Head Pump
25.9 sq in (167 sq cm)
0.65 sq in (4 sq cm)
Therefore, actual ratio = 40:1
Nominal Ratio = 35:1
Double Air Head Pump
Area 25.9 sq in (167 sq cm)

Area .65 sq in (4 sq cm)
Nominal Ratio = 72:1*
Triple Air Head Pump

Area .65 sq in (4 sq cm)
Nominal Ratio = 103:1**
Nominal Ratio
* (2) Indicates Double Drive Piston
** (3) Indicates Triple Drive Piston
www.haskel.com
1. Drive
Section
2. Hydraulic
Check
Valves
Anatomy of a Pneumatic Driven Pump

1. Drive Section
The piston, complete with O ring seal, operates in an epoxy filled,
fiberglass wound barrel, the diameter of which is constant throughout
a given series of pumps. Drive media forces the piston down on the
compression stroke and raises it on the suction stroke (M series have a
spring return). The piston is pre-lubricated during assembly and therefore
no air line lubricator is necessary.
2. Hydraulic Section/Check Valves
This is directly linked to the drive piston by the hydraulic piston, the
bottom portion of which is in the hydraulic body. Outlet flow and pressure
are determined by the area of the hydraulic piston head, its nominal
ratio with the drive piston head, and drive pressure. On the down stroke,
liquid in the hydraulic section is forced under compression through the
outlet check valve. Fresh liquid is induced via the inlet check valve on
the return stroke. These check valves control the flow of liquid through
the hydraulic section. They are spring-loaded and have a very low
cracking pressure, allowing maximum opening on the induction stroke.
The pressure of hydraulic fluid on the down stroke closes the inlet check
valve and acts against the spring to open the outlet check valve.
3. Drive Cycling Valve
This is a pilot-operated, unbalanced, lightweight spool, which directs
drive pressure, first to the top of the drive piston, and then to the
underside to reciprocate the piston (cycle). It actuates via pilot valves at
the top and the bottom of the stroke, which causes the unbalanced spool
to shift and reciprocate the piston.
3. Drive
Cycling
Valve
4. Hydraulic
Seal/Check
Valve
www.haskel.com
4. Hydraulic Seal/Check Valves

This is one of the few wear parts. Its function is to allow the hydraulic
piston to reciprocate without passing fluid into the drive section. The liquid,
its pressure and its temperature determine seal specification. A distance
piece can be incorporated between drive and hydraulic sections for
complete contamination-free operation on most Haskel pumps.
Pump Selection Information

All Haskel pumps are identified by letters coding the type of
pump, followed by a number indicating the practical working ratio
of the drive area to the hydraulic plunger area. These letters are
explained in the chart below.
Pump Model Letter Coding

.875 stroke .33 hp miniature pump series
Stainless steel hydraulic piston and body
.33 hp Chemical Pump
Pump incorporates a Distance Piece
Double Acting pump
1 stroke .75 hp pump series (bottom inlet only)
2 stroke 1.5 + 2 hp pump series
2 stroke 1.5 + 2 hp High Pressure pump series
Filter, regulator with gauge and shut-off/speed control valve
Quick Model
Comparison
Chart
The chart to the right shows
the pressure/flow capability
of each pump in the range.
The diagonal lines show
constant output horsepower
for each series. The model
ratios are circled.
The diagonal horsepower lines in the chart below are based on 100 psi (7 bar) drive pressure.
Drive flow requirement is different for each series as follows:
.33 hp
15 scfm (25 m3/hr)
3 hp
85 scfm (144 m3/hr)
.75 hp
45 scfm (76 m /hr)
6 hp
175 scfm (297 m3/hr)
1.5 hp
70 scfm (119 m3/hr)
8 hp
225 scfm (382 m3/hr)
2 hp
85 scfm (144 m3/hr)
10 hp
270 scfm (459 m3/hr)
Reduced air drive flow or pressure will result in a corresponding reduction in output horsepower.
This chart can be used to select pump series and model ratio.
Pressure (psi)
0.1K
100.00
0.2K
0.5K
1K
2K
5K
10K
20K
3 hp
49.17
100K
6000
3000
12
6 hp
1.5 hp
16.39
25
15
10
8.20
.75 hp
7
15
25
32
1.64
100
52
37
200
225
315
72
100
56
21
10 hp
8 hp
60
60
500
125
100
35
35
30
.33 hp
65
25
21
12
60
22
14
3.28
1000
40
35
10
100
75
100
122
150
36
100
0.82
0.33
150
150
71
Note: For specific performance

curves, refer to Liquid Pump
Rapid Reference Guide.
50K
1.5
Flow (liters/min)
Example
The pressure required is
2175 psi (150 bar). The flow
required is 215 cubic inches
(3.52 liters) per minute. The
black dot plots position. Only
models on diagonals to the
right of the dot will meet the
demand; e.g., the -35 ratio
1.5 hp pump, assuming a
supply at 100 psi (7 bar) and
70 scfm (119m3/hr) can be
met; if not, a -32 or -52 2 hp
pump would be needed.
2 stroke 1.5 + 2 hp Extreme High Pressure pump series

4.5 stroke 6 hp pump series
4.5 stroke 8 hp pump or booster series
4 stroke 10 hp pump series
Polyurethane U-cup dynamic seal
UHMWPE (Ultra-high Molecular Weight Polyethylene Dynamic Seal
Reinforced teflon dynamic seal
Viton o-ring static seal
Bottom inlet
Chemical Pump
XH
G
8
14
W
F
T
V
-B
-CP
50
202
225 302
300 452
110
602
903
1373
0.16
6.9
13.8
34
69
138
345
Pressure (bar)
690
2 hp 20
683
188
0.08
Flow (cu in/min)
M
S
29723
D (Prefix)
D (Suffix)
4B
A
H
-C
1379
3448
10
5
6900
www.haskel.com
Maimimum Rated Output Pressure
HP
Drive Head
Max Drive
Performance and Specification Overview

Pump Model Code
Single
0.33 hp
125 psi/8.6 bar
Single
0.75 hp
100 psi/7 bar
1.5 hp
Single
150 psi/10.5 bar
ml
cu in/min
l/min
5.6
7.8
14
25
41
82
126
217
237
625
900
1500
2600
4500
8800
13500
15000
20000
43
62
103
179
310
607
931
1034
1380
625
900
1500
2600
4500
8800
13500
15000
25000
43
62
103
179
310
607
931
1034
1723
0.83
0.60
0.36
0.20
0.12
0.060
0.039
0.023
0.021
13.6
9.8
5.9
3.3
2.0
1.0
0.6
0.4
0.344
506
366
234
130
78
39
25
18
14
8.30
6.00
3.83
2.13
1.28
0.64
0.42
0.29
0.22
-14
-21
-25
-30
-37
-55
-75
-100
-150
16
24
29
34
42
63
86
114
171
1500
2300
2700
3200
3800
6000
7800
10600
15000
103
159
186
221
262
414
538
731
1034
1500
2300
2700
3200
3800
6000
7800
10600
15000
103
159
186
221
262
414
538
731
1034
0.90
0.60
0.50
0.43
0.35
0.22
0.17
0.13
0.088
14.7
9.8
8.2
7.0
5.7
3.6
2.8
2.0
1.44
428
285
238
204
166
105
81
62
42
7.01
4.67
3.89
3.35
2.72
1.71
1.32
1.01
0.68
-1.5
-4
-B10
-B15
-25
-35
-60
-100
-150
-151
-225
-300
-450
1.6
80
11.5
17
29
40
69
115
173
173
260
345
533
120
690
1600
2400
4000
5700
9800
15000
15000
25000
30000
30000
25000
8
48
110
165
276
393
676
1034
1034
1724
2069
2069
1724
160
1200
1600
2400
4000
5700
9800
16500
20000
25000
37000
50000
45000
11
83
110
165
276
393
676
1138
1380
1724
2551
3448
3403
31.90
20.00
4.05
2.70
1.62
1.16
0.67
0.41
0.27
0.27
0.18
0.14
0.091
513
328
66.4
44.3
26.6
19.0
11.0
6.7
4.5
4.5
3.0
2.3
1.5
5104
3200
1215
810
486
348
201
123
81
81
41
32
20
83.6
52.4
19.9
13.3
8.0
5.7
3.3
2.0
1.3
1.3
0.7
0.5
0.3
-B22
-B32
-52
-72
-122
-202
-302
-452
-602
23
34
57
80
138
230
346
520
690
3200
4800
5000
11000
15000
30000
30000
30000
30000
221
331
345
758
1034
2069
2069
2069
2069
3200
4800
8000
11000
19000
33000
50000
70000
75000
221
331
552
758
1310
2275
3448
4827
5171
4.05
2.70
1.62
1.16
0.67
0.41
0.27
0.18
0.14
66.4
44.3
26.6
19.0
11.0
6.7
4.5
3.0
2.3
1215
810
486
348
201
92
61
41
32
19.9
13.3
8.0
5.7
3.3
1.5
1.0
0.7
0.5
DSXHW
-683
-903
-1373
780
1038
1575
30000
30000
30000
2069
2069
2069
70000
75000
100000
4827
5171
6895
0.18
0.14
0.086
3.0
2.3
1.4
25
20
12
0.41
0.33
0.197
AFD, DFD, ASFD, DSFD
-B60
69
6500
448
6500
448
1.34
2.2
369
6.0
ASFD
-10
-15
-25
-35
-60
-100
-150
-202
11.5
17
29
40
69
115
173
230
1600
2400
4000
5700
9800
15000
15000
30000
110
165
276
393
676
1034
1034
2069
1600
2400
4000
5700
9800
16500
20000
33000
110
165
276
393
676
1138
1380
2275
8.10
5.40
3.24
2.32
1.34
0.82
0.54
0.82
133
89
53.2
38.0
22.0
13.4
9.0
13.4
1823
1215
729
522
302
185
122
144
29.9
19.9
11.9
8.6
4.9
3.0
2.0
2.4
-12
-35
-60
-100
14.8
40.3
69
115
1850
4375
7500
8000
128
302
517
552
4000
4375
7500
10000
276
302
517
690
15.9
6.0
3.5
2.1
260
98
57
34
5009
1890
1103
662
82.1
31.0
18.1
10.8
-25
-40
-65
-100
-225
27.5
43.5
73
112
253
3575
6000
10000
10000
22500
246
414
690
690
1530
4000
6000
10000
10000
22500
276
414
680
680
1530
14.0
8.90
5.40
3.52
1.56
229
145
88
57.5
25.5
2660
1691
1026
669
296
44
28
17
11
5
-125
-315
138
347
16000
36000
1103
2482
16000
36000
1103
2482
8.80
3.50
144
57.4
704
280
11.5
4.6
M, MS, 29723
4B
AW, ASF, DF, DSF, DSTV
HF, HSF, DHF, DSHF

HF
2 hp
Double
HF, HSF, DHF, DSHF
2 hp
2.2
Triple
DXHF, DSXHF
3 hp
6 hp
GW, DGF, GSF, DGSF, DGSTV

8SFD, 8DSFD, 8DSTVD
8 hp
Single
DXHF, DSXHF
GWD, GSFD, DGFD, DGSFD, DGSTVD
10 hp
Maximum Flow
cu in
AW, ASF, DF, DSF, DSTV
100 psi/7 bar
Displacement/Cycle
bar
DSTV
ATV, DTV
150 psi/10.5 bar
Intermittent
psi
M, MS
MS
125 psi/8.6 bar
-5
-7
-12
-21
-36
-71
-110
-188
-220
Continuous
bar
M, MS
www.haskel.com
Actual
Ratio
psi
M, MDSTV
Nominal
Ratio
8SFD
8DSFD
8HSFD
D14STD, D14SFD
Typical Performance Based on 100 psi (7 bar) Pressure and Drive Flow Data on Page 5
Outlet Pressure
Outlet Flow
Outlet Pressure
Outlet Flow
psi
bar
cu in/min
l/min
psi
bar
cu in/min
l/min
225
300
700
1500
1700
3000
7500
5000
7500
15.5
21
48
103
117
207
517
345
517
500
350
200
90
70
39
20
18
14
8.20
5.70
3.28
1.48
1.15
0.64
0.33
0.30
0.23
415
600
1125
2000
3100
6000
8500
10000
15000
29
41
78
138
214
414
586
690
1034
249
160
100
48.9
39.6
19
17
14
12
4.09
2.60
1.64
0.80
0.65
0.31
0.28
0.23
0.20
700
1000
1250
1500
1750
2000
2500
5000
7500
48
69
86
1034
121
138
172
345
517
400
270
230
200
170
110
87
57
37
6.55
4.42
3.77
3.28
2.78
1.8
1.42
0.93
0.6
1450
2000
2500
3000
3500
5000
7500
10000
15000
100
138
172
207
241
345
517
690
1034
61
120
61
62
82
66
37
26
7
1
2
1
1
1.33
1.08
0.6
0.43
0.11
50
100
400
750
1000
2000
3000
4000
7000
7000
7500
15000
36000
3
7
28
52
69
138
207
276
483
483
517
1034
2483
5000
1953
1000
598
403
350
152
100
59.7
59.7
39.6
29.9
14.6
81.9
32
16.4
9.8
6.6
4.1
2.5
1.64
0.98
0.98
0.65
0.49
0.24
150
400
990
1600
2500
3600
6200
10000
15000
15000
24000
27000
45000
10.3
28
68
110
172
248
427
690
1034
1034
1655
1862
3103
1000
750
500
200
195
98
50
24.4
29.9
29.9
9.8
20.1
9.2
16.4
12.3
8.19
3.28
3.2
1.6
0.82
0.4
0.49
0.49
0.16
0.33
0.15
400
700
1900
2000
4000
7000
10000
10000
15000
28
48
131
138
276
483
690
690
1034
799
500
299
226
122
91.5
45.2
34.8
24.4
13.1
8.2
4.9
3.7
2
1.5
0.74
0.57
0.4
2100
3000
5000
7500
12000
20000
30000
40000
50000
145
207
345
517
828
1379
2069
2759
3448
200
152
97.6
50
40.2
20.1
15.2
15.2
12.2
3.28
2.5
1.6
0.82
0.66
0.33
0.25
0.25
0.2
15000
15000
16000
1034
1034
1103
19.5
15.9
9.2
0.32
0.26
0.15
60000
70000
90000
4138
4828
6207
4.9
5.5
3.1
0.08
0.09
0.05
1000
69
348
5.7
5500
379
152
2.5
500
750
1000
1500
3000
5000
7500
10000
34
52
69
1034
138
345
517
690
1520
1030
662
465
248
151
103
63
24.9
16.88
10.85
7.62
4.07
2.48
2
1.03
1000
1500
2500
3500
6000
10000
15000
20000
69
103
172
248
414
690
1034
1379
380
260
162
100
56
41
27
47
6.22
4.26
2.66
1.64
0.92
0.67
0.44
0.77
200
1000
2000
2000
14
69
138
138
5004
1770
976
573
82
29
16
9.4
1200
3500
5500
10000
83
241
379
690
1454
600
397
195
24
9.8
6.5
3.2
1000
2000
3000
5000
10000
69
138
207
345
690
2400
1420
880
555
270
39.3
23.2
14.4
9.1
4.4
2500
4000
6000
10000
20000
172
276
414
690
1379
280
200
310
163
144
4.6
3.27
5.08
2.67
2.36
8000
15000
552
1034
488
238
8.0
3.9
12000
30000
828
2069
195
79.3
3.2
1.3
Guidelines for Continuous Duty

Applications for Maximizing
Seal Life Performance
Pump Series
Maximum Cycles per Minute
0.3 hp
325 cpm
0.75 hp
225 cpm
1.5, 2.0 and 2.2 hp

(Single and Double Drive Piston)
80 cpm
2.0 hp (Triple Drive Piston)
60 cpm
3.0 hp
80 cpm
6.0 hp
60 cpm
8.0 hp
50 cpm
10.0 hp
40 cpm
www.haskel.com
.33 hp (.25 kW) M Series Pump Models
Nominal
Ratio
Maximum Working Pressure
Displacement
per Cycle
M,
MDSTV
-5
625 psi (43 bar)
.83 cu in (13.6 ml)
M, MS(3)
-7
-12
900 psi (62 bar)

1500 psi (103 bar)
.6 cu in (9.8 ml)
.36 cu in (5.9 ml)
M, MS(3),
29723(3)**
-21
-36
-71
-110
-188
2600 psi (179 bar)

4500 psi (310 bar)
8800 psi (607 bar)
13500 psi (931 bar)
15000 psi (1034 bar)
.2 cu in (3.3 ml)
.12 cu in (2.0 ml)
.06 cu in (1.0 ml)
.039 cu in (0.6 ml)
.023 cu in (.4 ml)
MS
-220
25000 psi (1723 bar)
.021 cu in (.34 ml)
Model
Key Features
Choice of 5 models, 9 ratios,
27 possible combinations
Flows to 2 gpm (7.5 l/min)
Choice of wetted materials
Single air head
Drive pressure 25 to
125 psi (1.8 to 9 bar)
Pressures to 25000 psi

(1724 bar)
All Hydraulic fluids, water
(plain or DI), solvents, mild
chemicals, liquefied gases
** Not available in 188 ratio

(3) Maximum intermittent pressure for stainless steel in the MS and 29723 is 10000 psig (690 bar.)
For service codes, see page 17.

For weights and dimensions, see page 18.
Optional Modifications
Number
Description
Number
Description
-HP
Hand pump attachment (with handle). Provides manual operation of pump for
precision pressure control or use without air power.
Handle only.
With handle.
Without handle.
Kits for converting existing units.
51809
Normally open air operated release with relief valve. Provides highest release flow
capacity. Will hold full pump psi piloted from drive air. Vents are not threaded. Ref.
drawing 56643 for tank top mounting parts.
51809-1
Normally closed air operated release with relief valve. Used to hold hydraulic jacks.
Will release up to 11000 psi (using 100 psi air). Vents are not threaded. Ref. drawing
56643 for tank top mounting parts. Not available in 188:1 ratio.
51810
Safety relief valve. Relief is upstream of outlet check. Vent hole 1/16 NPT M or MS
series -21 through 188.
51811
External air pilot. Provides 18 NPT port for external air to pilot for remote start/stop.
52340
Solid air cap.
52950
Electric stroke counter provision. Micro switch (BZE6-2RQ) mounted on upper cap
trips with each cycle.
53175
Level II cleaning.
53304
High pressure outlet port. Fits O.D. high pressure threaded and coned tube.
53784
Piped exhaust (drive only). For field conversion of any .33 HP pump. Provides NPT
exhaust port.
53935
Low temperature drive. Enables operation down to 5F. Some sacrifice of seal life at
normal temperature. M or MS series.
26082
26220-2
26220-3
-V
Manual release with relief valve. For M and MS pumps only. Provides high pressure
needle valve with internal adjustable safety relief downstream of pump outlet
checks. Tank return is 18 NPT in pump body.
26063-3
Dead Man valve. NPT port.
26064-3
Combination air regulator/filter with gauge. NPT port.
26065-3
Speed control valve. NPT port.
26065-3
plus
26064-3
-C air controls installed on pump. NPT port.
28320
Manifold mount inlet port. Provides O-ring boss in aluminum block to enable mounting
on side of tank below oil level. Modification applies to M-21 through M-188 only.
28590
Palm or foot start/stop button drive. Spring loaded shut.
28700-1
Air OP release valve.
28926
Remote start/stop control. Provides 18 NPT bleed signal port for single line
remote control.
54179
Stroke adjuster (includes 29697 above). Useful for metering applications. Knurled
knob with vertical scale on pump cap.
29002
Viton air drive.
57905
29697
Single stroke from remote air pulse. Useful for metering applications. One stroke per
air pulse signal; eliminates automatic cycling. 18 NPT signal port.
No return spring. Provides improved fill on suction stroke pumping liquefied gases
by utilizing the inlet pressure. Only available on M and MS series.
59888
Cycle timer installed.
51331
EPR seals for liquid section for 29723-XX ratio pumps.
80103
Noise reduction kit fitted.
51788
Piped exhaust standard. Provides connection ports for drive and pilot exhausts.
Enables under tank top mounting and/or natural gas drive.
80348
SAE outlet for M-pumps, 38 SAE, 6500 psi (448 bar) max.
81499
EPR Seals for M and MS series for Liquid Section.
51794
Piped exhaust sour gas. With hand pump (HP).
82367
SS trim for 13 hp drive
51794-2
Piped exhaust sour gas. Without hand pump (HP).
82500
ATEX Modification (Available on MS & 29723 but not M series).
51804
Muffler (for use with piped exhaust modifications below). NPT male port.
85630
Conversion kit, new style exhaust muffler.
86337
Extended life air drive.
www.haskel.com
.75 hp (.56 kW) Pump Models
Model
4B
Key Features
One model available
in 9 ratios
Output pressures to
15000 psi (1034 bar)
Flows to 1.5 gpm (5.7 l/min)
Nominal
Ratio
Displacement
per Cycle
-14
-21
-25
-30
-37
-55
-75
-100
-150
1500 psi (103 bar)

2300 psi (159 bar)
2700 psi (186 bar)
3200 psi (221 bar)
3800 psi (262 bar)
6000 psi (414 bar)
7800 psi (538 bar)
10600 psi (731 bar)
15000 psi (1034 bar)
.9 cu in (14.8 ml)
.6 cu in (9.8 ml)
.5 cu in (8.2 ml)
.43 cu in (7.1 ml)
.35 cu in (5.7 ml)
.22 cu in (3.6 mil)
.17 cu in (2.8 ml)
.13 cu in (2.1 ml)
.088 cu in (1.4 ml)


Single air head
Air drive pressure 3 psi to
100 psi (0.2 to 7 bar)
Number
Description
Number
Description
-C
Air drive controls.
59888
56564
Extreme cycling service. Not recommended for long stall periods.
80637
SAE outlet fitting for ratio 37 to 100, 14 SAE, 6500 psi (448 bar) max.
56594
External air pilot port 8 NPT. Allows remote start/stop of pump.
82104
Viton air drive.
57639
Low drive air pressure. Allows user to regulate drive air to as low as 3 psi (0.21 bar).
82500
ATEX modification.
57960
Single acting drive. Used for pumping liquefied gases under pressure.
86337
58475
59354
Noise reduction kit fitted.
8 NPT port on drive for recycle valve connection.
www.haskel.com
1.5 hp (1.12 kW) Pump Models
Key Features
Choice of 11 models,
13 ratios, 48 possible
combinations
Output pressures to
50000 psi (3448 bar)
Flows to 22 gpm (83.0 l/min)

Single air head
Air drive pressure 2.9 to 150
psi (0.2 to 10 bar)
Model
Nominal
Ratio
Displacement
per Cycle
DSTV(1)
-1.5
160 psi (11 bar)
31.9 cu in (513.0 ml)
ATV,
DTV(1)
-4
1200 psi (83 bar)
20.0 cu in (328.0 ml)
AW, ASF,
DF, DSF,
DSTV
-B10
-B15
-25
-35
-60
1600 psi (110 bar)

2400 psi (165 bar)
4000 psi (276 bar)
5700 psi (393 bar)
9800 psi (676 bar)
4 cu in (66.4 ml)
2.7 cu in (44.3 ml)
1.6 cu in (26.6 ml)
1.2 cu in (19 ml)
.7 cu in (11 ml)
AW, ASF,
DF, DSF,
DSTV
-100
-150
16500 psi (1138 bar)

20000 psi (1375 bar)
.4 cu in (6.7 ml)
.28 cu in (4.5 ml)
HF, HSF,
DSHF
-151
-225
-300
25000 psi (1724 bar)

37000 psi (2551 bar)
50000 psi (3448 bar)
.28 cu in (4.5 ml)

.18 cu in (3.0 ml)
.14 cu in (2.3 ml)
HF
-450
45000 psi (3403 bar)
.09 cu in (1.5 ml)
(1) T hese series are Lift pumps and maximum outlet

pressure is (air drive x pump ratio) + inlet pressure

10
Number
Description
Number
Description
-C
Air controls (filter, regulator, gauge, shut-off). NPT.
29806
Double distance piece. For 1.5 hp and 2 hp pumps only, except 1.5:1 ratio.
-CP
Air controls with precision regulator. NPT.
51050
Extreme service cycling modification. Not recommended for long stall periods.
-CO
Air controls with recycle button. NPT.
51056
Exhaust/pilot vent combination.
-CPO
Air controls with precision regulator and recycle button. NPT.
51331
-B
Bottom Inlet (designate B before ratio dash number, BR on -B10, -B15, -B22
and -B32) 1.5 hp and 2 hp pumps (not applicable to high output, chemical, 2.2 hp,
or AWD series pumps).
EPR (Ethylene propylene) static seals in wetted section. Applies to distance

piece pumps only.
51345
Sour gas drive provision to N.A.C.E. specifications. 1.5 hp to 2.2 hp distance

piece pumps only, single air head and double air head.
-W
Additional upper foot bracket.
52788
Viton seals air drive.
16821
Low air pressure control feature. For operating at air pressures as low as 3 to 4
psi (0.2 to 0.3 bar). Includes 28881 modification.
53925
Severe Arctic low temperature service. -25, -35, -60, -100, -150, -151, -225, -300,
-450 ratios.
16831
Low temperature modification. For special sealing in air drive for operating
temperatures from as low as -20F up to normal +120F.
54885
Rotate pump body 90 from standard.
54935
SS trim for 5/3 air drive.
55305
Tube ports. 58 SAE inlet and outlet. For 1.5 hp to 2 hp pumps. 15 pump minimum.
55516
Polyurethane (W) seal. For F or TV series pumps, except high output models.
55630
Stainless steel (AISI-316) distance piece. For 1.5 hp to 2 hp pumps.
59353
Noise reduction kit fitted. Not available on AFD, DFD, ASFD or DSFD.
HNBR seals in air drive section.
16834
Exhaust adapter. With back pressure balance piston.
17860
Electrical stroke counter provision. Includes BZE6-2RQ microswitch.
25721
Mechanical stroke counter, installed (6 digit).
27964
Interconnecting inlet-outlet tubing. female for 4:1 ratio series pumps

(ATV-4 or DTV-4).
28000
Threaded vent (or purge) ports on standard distance piece. Except 1.5:1 ratio.
82460
28003
Test port. Provides access port in pumps body between inlet and outlet check
valves for 1.5 hp and 2 hp pumps. -10 ratio or higher, single acting.
82500
ATEX modification (not available on AW or DSXHW pumps).
82958
86337
28881
Air pilot modification. 8 NPT. Allows remote start/stop of pump.
29376
Three-way cycling spool. For 1.5 hp and 2 hp single acting pumps, for use with CO2
29702
Single stroke modification.
www.haskel.com
16 High pressure outlet converts medium ratio 10-122 outlet 12 port to high
pressure port.
1.5 hp (1.12 kW) High Output

Flow Pumps
Available in a choice of 3 models, these high output, low ratio
pumps are capable of pressures to 1200 psi (82 bar) and flow
rates of up to 22 gpm (83 l/min). These are lift pumps whereby
the outlet pressure equals the air drive x the pump ratio plus the
inlet pressure.
Mounting Brackets
All series mounting brackets have 7/16 holes (slots) for 3/8
bolts. Upper mounting brackets are not furnished as standard
on single air head non-distance piece units.
Dimensional Data
Mounting Brackets
Model DSTV-1.5 has a maximum air drive of 150 psi (10 bar) and
is capable of pressures up to 160 psi (11 bar). The model ATV
and DTV-4 work on a maximum air drive of 150 psi (10 bar) and
have a maximum pressure rating of 1200 psi (83 bar). A noise
reduction modification is available for applications where noise
level is an issue.
Distance Piece (Separation)

Pumps with prefix D in the model number have aluminum
distance piece between the air drive and pump section (except
DSTV-1.5). Vent holes can be threaded NPT female at extra
cost. Specify modification number 28000. Horizontal mounting is
recommended for non-exchange of contaminants.
Optional Pump Inlets for Tank Mounting

To specify ratios
-10, -15, -22 or -32,
add BR between
the model number
and the ratio, e.g.
AW-BR10.
Inlet externally
threaded 1
NPT male
Internally threaded
1 NPT female
To specify ratios
-25 through -903,
add B between
the model number
and the ratio, e.g.
AW-B25.
Inlet on the bottom
and externally
threaded
1 NPT male
Internally threaded
NPT female
Drive inlet and exhaust are NPT female. Drive inlet also includes a NPT male x NPSM female
(straight pipe thread) swivel adapter (connecting male nipple should include 30 inside bevel for proper fit).
www.haskel.com
11
2 & 2.2 hp (1.49 & 1.64 kW) Pump Models
Nominal
Ratio
Displacement
per Cycle
AW, ASF,
DF, DSF,
DSTV
-B22
-B32
-52
-72
-122
3200 psi (221 bar)

4800 psi (331 bar)
8000 psi (552 bar)
11000 psi (758 bar)
19000 psi (1310 bar)
4 cu in (66.4 ml)
2.7 cu in (44.3 ml)
1.6 cu in (26.6 ml)
1.2 cu in (19 ml)
.7 cu in (11 ml)
HF, HSF,
DHF, DSHF
-202
-302
33000 psi (2275 bar)

50000 psi (3448 bar)
.4 cu in (6.7 ml)
.28 cu in (4.5 ml)
DXHF,
DSXHF
-452
-602
70000 psi (4827 bar)

75000 psi (5171 bar)
.18 cu in (3.0 ml)

.14 cu in (2.3 ml)
DXHF,
DSXHF
-683
-903
70000 psi (4827 bar)

75000 psi (5171 bar)
.18 cu in (3.0 ml)

.14 cu in (2.3 ml)
DSXHW
-1373
100000 psi (6895 bar)
.09 cu in (1.4 ml)
AFD, DSFD,
DFD, ASFD
-B60
6500 psi (448 bar)
1.3 cu in (22 ml)
Key Features
Choice of 16 models,
13 ratios, 46 possible
combinations
Output pressures to
100000 psi (7000 bar)
Flows to 5 gpm (15 l/min)

Double and triple air heads
Air drive pressure 2.9 to
145 psi (0.2 to 10 bar)
2.2 hp
2 hp
Model

3 hp (2.24 kW) Pump Models
Model
ASFD
Nominal
Ratio
Maximum Working Pressure*
Displacement
per Cycle
10
15
25
35
60
100
150
202
1600 psi (110 bar)

2400 psi (165 bar)
4000 psi (276 bar)
5700 psi (393 bar)
9800 psi (676 bar)
16500 psi (1138 bar)
20000 psi (1379 bar)
33000 psi (2275 bar)
8.1 cu in (132.8 ml)

5.4 cu in (88.6 ml)
3.3 cu in (53.2 ml)
2.3 cu in (38 ml)
1.3 cu in (22 ml)
.8 cu in (13.4 ml)
.6 cu in (9 ml)
.8 cu in (13.4 ml)
Continuous/Intermittent

Key Features
One model available
in 8 ratios
Output pressures to
33000 psi (2275 bar)
Flow rates to 8 gpm (30 l/min)
12
www.haskel.com
Single air head

Air drive pressure 3 to 150 psi
(0.2 to 10.0 bar)
Optional Modifications (for 2 hp, 2.2 hp and 3 hp pump models)

Number
Description
Number
Description
-C
Air controls (filter, regulator, gauge, shut-off. NPT.
51050
Extreme service cycling modification. Not recommended for long stall periods.
-CP
Air controls with precision regulator. NPT.
51056
Exhaust/pilot vent combiner.
-CO
Air controls with recycle button. NPT.
51331
-CPO
Air controls with precision regulator and recycle button. NPT.
EPR (Ethylene propylene) static seals in wetted section. Applies to distance

piece pumps only.
-B
Bottom Inlet (designate B before ratio dash number, BR on -B10, -B15, -B22
and -B32) 1.5 hp and 2 hp pumps (not applicable to high output, chemical, 2.2 hp,
or AWD series pumps)
51345
Sour gas drive provision to N.A.C.E. specifications. 1.5 hp to 2.2 hp distance

piece pumps only, single air head and double air head.
52788
Viton seals. Air drive only 1.5 hp to 2.2 hp pumps only.
16821
Low air pressure control feature. For operating at air pressures as low as 3 to 4
psi (0.2 to 0.3 bar).
53925
Severe Arctic low temperature service. -25, -35, -60, -100, -150, -151, -225, -300,
-450 ratios except 3 hp pump.
16831
Low temperature modification. For special sealing in air drive for operating
temperatures from as low as -20F up to normal +120F.
54885
Rotate pump body 90 from standard. Except 3 hp pump.
54935
SS trim for 5/3 air drive.
55191
Mounting ring kit for AWD series.
55192
3/4 NPT inlet port installed on AWD series (in place of threaded port).
55193
Extra foot bracket installed.
55305
Tube ports. 58 SAE inlet and outlet for 1.5 hp to 2 hp pumps, 15 pump minimum.
16834
Exhaust adapter. With back pressure balance piston.
17860
Electrical stroke counter provision. Includes BZE6-2RQ microswitch.
25721
Mechanical stroke counter. Installed (6 digit).
27964
Interconnecting inlet-outlet tubing. female for 4:1 ratio series pumps (ATV-4
or DTV-4).
28000
Threaded vent (or purge) ports on standard distance piece. Except 1.5:1 ratio
and 3 hp pump.
55465
Ceramic Plunger -60 Ratio.
55516
Polyurethane W seal in F series pumps-except high output models.
Test port. Provides access port in pumps body between inlet and outlet check
valves for 1.5 hp and 2 hp pumps, -10 ratio or higher, single acting.
55630
Stainless steel (SS-316) distance piece for 1.5 thru 2 hp pumps.
59353
Noise reduction kit fitted. Not available on AFD, DFD, ASFD or DSFD.
59888
82460
HNBR Seals in air drive section.
82500
ATEX modification (not available on AW or DSXHW pumps).
86337
28003
28881
Air pilot modification. 18 NPT Allows remote start/stop of pump.
29376
Three-way cycling spool. For 1.5 hp and 2 hp single acting pumps.
29702
Single stroke modification. Except 3 hp pump.
29806
Double distance piece. For 1.5 hp and 2 hp pumps only, except 1.5:1 ratio.
www.haskel.com
13
Nominal
Ratio
Displacement
per Cycle
GWD,
GSFD,
DGFD(1),
DGSFD(1),
DGSTVD(1)
-12
4000 psi (276 bar)
15.9 cu in (260 ml)
GW, GSF,
DGF,
DGSF,
DGSTV
-35
-60
-100
4375 psi (302 bar)

7500 psi (517 bar)
10000 psi (690 bar)
6.0 cu in (98 ml)

3.5 cu in (57 ml)
2.1 cu in (34.5 ml)
Model
(1) Double Acting Lift Pumps
Key Features
Output pressures to
10000 psi (690 bar)

Single air head

double acting
Air drive pressure 15 to
125 psi (1 to 9 bar)
All hydraulic fluids, water
(plain or DI), solvents
Incorporating 10 models, this heavy duty range of double acting

pumps provide pressures up to 10000 psi (690 bar) and flow rates
up to 4 gpm (15 l/min).
Designed to operate with air drive pressures between 40 and 125
psi (2.8 and 9 bar). For drive pressures 3 to 40 psi (.2 to 2.8 bar),
order 51875-1 mod.
Nominal
Ratio
Displacement
per Cycle
8SFD,
8DFD,
8DSFD,
8DSTVD
8FD
-25(1)
4000 psi (276 bar)
14 cu in (229 ml)
8SFD
8DSFD
-40
-65
-100(1)
6000 psi (408 bar)

10000 psi (690 bar)
10000 psi (690 bar)
9 cu in (145.3 ml)
5.4 cu in (88.2 ml)
3.5 cu in (57.5 ml)
8HSFD
-225(1)
22500 psi (1530 bar)
1.6 cu in (25.5 ml)
Model
Key Features
(1530 bar)
Flow rates to 11.5 gpm
(44 l/min)
14
www.haskel.com

(plain or DI), solvents,
liquefied gases
Single air head double acting
Air drive pressure 15 to 125
psi (1 to 9 bar)

Nominal
Ratio
Displacement
per Cycle
D14STD
125(1)
315(1)
16000 psi (1103 bar)

36000 psi (2482 bar)
8.8 cu in (144.2 ml)

3.5 cu in (57.4 ml)
D14SFD
125(1)
315(1)
16000 psi (1103 bar)

36000 psi (2482 bar)
8.8 cu in (144.2 ml)

3.5 cu in (57.4 ml)
Model

Key Features
(2500 bar)

(plain or DI), solvents,
liquefied gases
Incorporating two basic models, this heavy duty range of double

acting pumps provide pressures up to 36000 psi (2482 bar) and
output flow rate up to 3 gpm (11 l/min).
Operating from a maximum air drive pressure of 125 psi (9 bar),
these pumps are designed for medium to high pressure service
with minimum maintenance.
These large, slow speed pumps approach a seal life as high as 5
times that of many smaller pumps and this advantage becomes
ever greater in heavy duty service involving water, or other liquids
with negligible lubricity.
Optional Modifications (for 6 hp, 8 hp and 10 hp pump)

Number
Description
Number
Description
Air controls.
54312
Extreme service cycling modification for 6 hp thru 10 hp pumps.
17860
Electrical stroke counter provision (includes BZE6-2RQ micro switch).
54936
Exhaust/pilot vent combiner.
25721
Mechanical stroke counter installed (6 digit).
55330
Interconnecting tubing 8DSFD-100 low pressure inlet.
29077
Interconnecting tubing 6 hp and 8 hp pumps, double ended.
55330-1
Interconnecting tubing 8DSFD-100 high pressure inlet.
29077-1
Interconnecting tubing 6 hp and 8 hp pumps, double ended low ratio pumps.
55366
Interconnecting tubing 8DSFD-225.
29078
Same as 29077, 29077-1 double ended w/distance piece.
57002
Viton seals air drive only 6 hp.
29078-1
Same as 29077, 29077-1 double ended w/distance piece low ratio pumps.
57944
Viton seals air drive only 8 hp.
29079
Interconnecting tubing 10 hp pumps.
59888
29125
External pilot modification for 6 hp thru 10 hp pumps.
82500
51875-1
Low air pressure control for 6 hp thru 10 hp pumps.
ATEX modification available for 6 hp only, not available on 8 hp or 14 hp drive, nor on

GW, GSF, DGSF, GSFD, or DGSFD models.
54030
Sour gas air drive provision to NACE spec. 6 hp distance piece pumps only.
86337
www.haskel.com
15
Power System Specialists

World safety standards and quality demands are rising.
Component manufacturers are required to provide test
certification and product quality assurance which can only be
determined using the types of systems which Haskel can provide.
Typically, we have built systems for production and field testing
the proof, leak, and burst aspects of hoses, cylinders, and valves.
These systems can be portable, mobile, or static test rigs. We also
offer a range of standard pressure packs used for power jacking,
clamping, and other applications where reliable power is needed.
Quality and
After-Sale Service
Haskel meets the requirements of international
quality assurance ISO 9001. Build quality is
matched by an innovative design and problem
solving ability which stems from years of years of experience.
Our representatives around the world are carefully chosen and
trained to help you arrive at a correct product choice, and to offer
a maintenance and parts service that is second to none.
Selecting Your Accessories

Haskel can either provide accessories separately or supply them fitted to form a complete
package suited to your application. Additionally, Haskel can fit customer nominated
accessories. Our accessories catalog is available and our technical support team is always
ready to advise you on the most suitable choice of accessories for your application.
Air pilot switches
Air pilot valves
Regulating relief valves
Directional control and release valves
Hydraulic accumulators, gas receivers
and storage cylinders
16
www.haskel.com
High pressure valves, fittings and

tubing
Plenum chambers
Port adapters
Pressure regulators
Gauge snubbers
Filters
Stainless steel check valves

Intensifiers with integral checks for
cycling
Capillary type gauge snubbers
Please ask for your copy of our latest
accessories brochure.
Liquids Compatible with

Haskel Pumps
To assist in easier pump selection, we have classified various
popular liquids in groups and assigned to each group a service
code. These service code numbers are featured in the chart to
the right and are designated for each pump series. Seals and
other wetted materials can be supplied to suit your preferred
liquid. For advice, please contact our technical services
personnel at 818-843-4000.
Services
hp
.33
MDTV
MDSTV
MCPV
29723
Services
4B -14 to -37
4B -55 to -150
DSXHW
ASFD
GW
ASF
DF
DSF
HF
HSF
DHF
DSHF
1.5
2
2.2
DSTV
ATV
DTV
DSTV -1.5
AFD
DFD
ASFD
DSFD
DXHF
DSXHF
GSF
DGF
DGSF
6
DGSTV
GWD
GSFD
DGFD
Drive Section
-4 (25F) to +65C (150F) (low temperature seals are available
for Arctic operation).
DGSFD
DGSTVD
8FD
8SFD
8
8DFD
8DSFD
8DSTVD
8HSFD
D14STD -125
10
AW
Operating Temperatures
Liquid Section
For reasonable seal life, high temperature should be limited
to 54 C (130 F), for F and W seal models, 135 C (275 F) for T
and TV models (with distance piece).
MS
.75
Service Codes
1 Petroleum-based oils, kerosene, water with 5% soluble oil.
2 Plain water, diesel fuel.
3 Most phosphate ester-based fire-resistant hydraulic fluids,
e.g. Pydraul, Lindol, Cellulube, Fyrquel, and Houghtosafe
1120 and petroleum-based solvents compatible with
UHMWPE (Ultra-high Molecular Weight Polyethylene)
dynamic seals and Viton static seals.
4 Petroleum-based solvents, e.g. boron fuels, aromatic
hydrocarbons (benzene, toluene, xylene, hylene, etc.);
chlorinated solvents (trichlorethylene, carbon tetrachloride,
chlorobenzine, etc.); mercaptans, Dowtherm A, fluoronated
solvents (fluorobenzene, fluorochlorethylene, etc.);
Dowtherm E, plus all of Group 3 and some mildly corrosive
acids compatible with wetted materials. See note 5A
for service with methyl-ethyl-ketone, methyl acetone,
diacetone, alcohol and freon 22.
5 Skydrol and Aerosafe hydraulic fluid; acetone and some
alcohols (ethyl, methyl, and isopropyl).
5A. Also suitable for these fluids if Viton static seals are
replaced with EPR; specify modification number 51331 (no
extra charge); e.g., 51331-MDTV-5. Most phosphate esterbased fluids solidify at approximately 30000 psi.
6 Deionized water; demineralized water.
Note: Dynamic seal life with non-lubricating fluids will
understandably be less than with lubricating types.
Model
D14STD -315
D14SFD -125
D14SFD -315
5A
www.haskel.com
17
NB. Plan view of

M-Pump is common to
all M-Series pumps.
Net weight 2.65 kg

Boxed weight 2.9 kg
Box size 23 x 18 x 12 cm
Weights and
Dimensions
.33 hp (.25 kW) M Series Pump Models
M-7, M-12
approx. weight 9 lbs (4 kg)
MS-7, MS-12
approx. weight 9 lbs (4 kg)
Net weight 4 kg
Boxed weight 4.25 kg
Net weight 6 kg
Boxed weight 6.5 kg
Net weight 2.5 kg

Boxed weight 2.75 kg
MS-21, MS-36, MS-71,

MS-110, MS-188, MS-220
approx. weight 6 lbs (2.7 kg)
18
www.haskel.com
M-21, M-36, M-71, M-110,

M-188 approx. weight 6 lbs
(2.7 kg)
M-5 approx. weight 9 lbs (4 kg)
29723-21, 29723-36, 29723-71, 29723-110

approx. weight 6.5 lbs (3 kg)
MDSTV-5
Approx weight 15 1/2 lbs (7 kg)
.75 hp (.56 kW) Pump Models
Model 4B-14, 4B-21, 4B-25,

4B-30 and 4B-37
Model 4B-55 through

4B-150
www.haskel.com
19
1.5 hp, 2 & 2.2 hp (1.12, 1.49 & 1.64 kW) Pump Models
DSFD-B60
Net weight 18 kg
Boxed weight 20 kg
Net weight 10 kg
Boxed weight 11 kg
25.4 mm = 1 inch
1.5 and 2 hp high ratio pumps;

-683 and -903 ratios
1.5 and 2 hp low ratio pumps;

-B10 and -B15 ratios
Net weight 14 kg
Boxed weight 15 kg
(-52, -72, +22)
4 HP port (-202, -302)
1.5 and 2 hp medium ratio pumps;

-52, -72, -122, -202 and -302 ratios
20
www.haskel.com
2 & 2.2 hp (1.49 & 1.64 kW) Pump Models
Net weight 18 kg
Boxed weight 19 kg
Net weight 10 kg
Boxed weight 11 kg
DSTV-1.5 pump; single

acting, high output
ATV-4 pumps; double acting, high output

Note: For model DTV-4, add distance piece dimension from page 11.
Interconnecting inlet and outlet port tubing shown.
Net weight 9.5 kg

Boxed weight 10 kg
1.5 and 2 hp medium and high ratios; -25

through -150, -151, -225, -300 and -450 ratios
AFD or ASFD, -B60, -B100 pumps;

double acting, high output
ASFD-15
ASFD-202
ASFD-25
ASFD-35,
ASFD-60
ASFD-100
ASFD-150
" med.
} pressure
3
www.haskel.com
21
Net weight 31 lbs (14 kg)

Boxed weight 35 lbs (16 kg)
All models have 2 off 114
NPT air exhaust ports
and 1 off 34 NPT air drive
inlet ports.
Models GW, GSF nominal ratio 35, 60 100:1
Net weight 41 lbs (18.5 kg)

Boxed weight 48 (22 kg)
Models DGF, DGSF, DGSTV nominal ratio 35, 60 100:1

Boxed weight 61 (27 kg)
If interconnecting piping for the two
inlets and two outlets is required, specify
modification 29077 with your order.
Models GWD, GSFD nominal ratio 12:1

Boxed weight 75 lbs (34 kg)
If interconnecting piping for the two inlets and two outlets
is required, specify modification 29078 with your order.
Models DGFD, DGSFD, DGSTVD nominal ratio 12:1
22
www.haskel.com
Model
Length
Width
Height
Weight
Air Drive
Liquid Inlet
Liquid Outlet
8FD-25
8SFD-25
25 38 (644.5 mm)
9 12 (241 mm)
11 (279 mm)
80 lbs (36 kg)
1 14 NPT(2)
8DFD-25
8DSFD-25
8DSTVD-25
34 34 (883 mm)
9 12 (241 mm)
11 (279 mm)
94 lbs (43 kg)
1 14 NPT(2)
8SFD-40
26 78 (683 mm)
9 12 (241 mm)
11 (279 mm)
64 lbs (29 kg)
1 NPT
8SFD-65
26 78 (683 mm)
9 12 (241 mm)
11 (279 mm)
63 lbs (28.5 kg)
1 NPT
28 38 (721)
9 12 (241 mm)
11 (279 mm)
71 lbs (32 kg)
8 M/P (20K coned

and threaded
connection)
8HSFD-225
8DSFD-100
41 34 (1060 mm)
9 12 (241 mm)
11 (279 mm)
92 lbs (42 kg)
1 14 NPT(2)
4 NPT(2)
4 NPT(2)
8 NPT
2 NPT
8 M/P (20K coned

and threaded
connection)
4 NPT(2)
Approx. net weight 320 lbs (145 kg)
Note: See 29079 interconnecting tubing optional page 15. (29079 shown)
Single Inlet port 34 JIC male flare connection,single outlet port 38 HP ports (BuTech).
Individual Pump ports Liquid inlets 2 ea. 12 NPT ports,2 ea. 38 HP ports (BuTech)
www.haskel.com
23
Haskel International, Inc.

100 East Graham Place
Burbank, California 91502 USA
Tel: 818-843-4000 / Fax: 818-556-2549 or 818-841-4291
www.haskel.com
CELEBRATING OVER 60
YEARS OF HYDRAULIC AND
PNEUMATIC ENGINEERING
EXPERIENCE IN THE DESIGN
AND MANUFACTURING
OF HIGH PRESSURE
GENERATING EQUIPMENT
AND CONTROLS
Q05225
EMS511920
Haskel Europe Ltd.

North Hylton Road
Sunderland SR5 3JD, England, UK
Tel: 44-191-549-1212 / Fax: 44-191-549-0911
www.haskel-europe.com
Haskel Middle East
Hamilton Sundstrand Industrial ME FZE
P.O. Box 262384 Jebel Ali, Dubai, United Arab Emirates
Tel: +971 4886 2686 / Fax: +971 4886 2687
Email: sales@haskel.ae
Haskel Asia
Hamilton Sundstrand Singapore Industrial Pte. Ltd.
23 Tagore Lane #03-06
Tagore 23 Warehouse Complex, Singapore 787601
Tel: 65-6455-7559 / Fax: 65-6455-2841
www.haskel.com.sg
For further information on Haskel

products, please visit us online at
www.haskel.com
LP-GL 09/09
Printed in USA

Bomba Haskel..

Uploaded by

Copyright:

Available Formats

Bomba Haskel..

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bomba Haskel..

Uploaded by

Copyright:

Available Formats

PNEUMATIC DRIVEN LIQUID PUMPS

PERFORMANCE QUALITY RELIABILITY

Why Use Haskel Pneumatic Driven Pumps?

No need for air line lubrication saves costs and

Pressure and Flow on Demand

Output Horsepower Ratings

Double and Triple Air

Single Drive Head Pump

25.9 sq in (167 sq cm)

Area 25.2 sq in (163 sq cm)

Triple Air Head Pump

Anatomy of a Pneumatic Driven Pump

4. Hydraulic Seal/Check Valves

Pump Selection Information

Pump Model Letter Coding

15 scfm (25 m3/hr)

85 scfm (144 m3/hr)

45 scfm (76 m /hr)

175 scfm (297 m3/hr)

70 scfm (119 m3/hr)

225 scfm (382 m3/hr)

85 scfm (144 m3/hr)

270 scfm (459 m3/hr)

Note: For specific performance

2 stroke 1.5 + 2 hp Extreme High Pressure pump series

Flow (cu in/min)

Maimimum Rated Output Pressure

Performance and Specification Overview

125 psi/8.6 bar

100 psi/7 bar

AFD, DFD, ASFD, DSFD

AW, ASF, DF, DSF, DSTV

HF, HSF, DHF, DSHF

HF, HSF, DHF, DSHF

GW, DGF, GSF, DGSF, DGSTV

GWD, GSFD, DGFD, DGSFD, DGSTVD

AW, ASF, DF, DSF, DSTV

100 psi/7 bar

150 psi/10.5 bar

125 psi/8.6 bar

Guidelines for Continuous Duty

Maximum Cycles per Minute

1.5, 2.0 and 2.2 hp

2.0 hp (Triple Drive Piston)

.33 hp (.25 kW) M Series Pump Models

Maximum Working Pressure

625 psi (43 bar)

.83 cu in (13.6 ml)

900 psi (62 bar)

2600 psi (179 bar)

25000 psi (1723 bar)

.021 cu in (.34 ml)

Pressures to 25000 psi

** Not available in 188 ratio

For service codes, see page 17.

Solid air cap.

Dead Man valve. NPT port.

Combination air regulator/filter with gauge. NPT port.

Speed control valve. NPT port.

(1) T hese series are Lift pumps and maximum outlet