Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Analyzer 205

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

H2S IN LIQUIDS ANALYZER

CONTINUOUS ON-LINE PROCESS


CRUDE WATER AMINE NAPHTHA GASOLINE DIESEL

Model 205

FEATURES - PATENTED & EXCLUSIVE

Conformity to ASTM Methods


Specific to H2S Only
Accurate and Continuous Analysis
Quantitative Measurement in PPB,
PPM & Percent Levels
Push Button Validation
RS-232/485 Communication
Proven Reliability
Normal Calibrations Not Required
Fast Response Time
General Purpose or Explosion Proof
Awareded Preferred Vendor by
Saudi Aramco

Awarded Preferred Vendor by Saudi Aramco


for the Model 205 H2S in Crude Analyzer

Description & Principle of Operation

The ability to analytically quantify H2S in non-volatile liquids, such as naphtha, water, light crude
oil, and gasoline, are enhanced with the Sample Transfer StripperTM (Patented Membrane Technology) and ratiometric colorimetric technologies offered by Analytical Systems International
Keco (ASI KECO).
The principle of operation requires a continuous free flowing liquid sample into a heater where the
Sample Transfer StripperTM (STS) unit separates the liquids from the H2S gas sample. An H2S
free air or nitrogen carrier then sweeps the H2S gas sample to the H2S analyzer for quantitative
analysis in ppb w, ppmw, and up to saturation levels. A liquid validation by PermTubeTM is optional.
The detection technology is based on chemically specific density changes. The lead acetate
sensing tape utilized in our analyzers is the only detection method that is absolutely specific to
H2S. Optical illumination & detection are integrated for maximum resolution accuracy. Economic
payout is increased because of this automated continuous process or laboratory analyzer.
(281) 516-3950 FAX (281) 351-8925
www.asikeco.com Sales@asikeco.com

REGULATOR

CARRIER AIR
FLOW CONTROLLER

OVEN

PRINTER

HYRDROCARBON
FREE AIR
3
1

SECONDARY
FILTER

NEEDLE
VALVE

SAMPLE
INPUT

H2S
DETECTOR

SAMPLE
TRANSFER
2 STRIPPER
(STS)

DEDICATED
MICROPROCESSOR
COMMUNICATION
& ANALYSIS
RS-232/485

VENT

SAMPLE
FLOWMETER

FLOW
DIAGRAM

PRE-HEAT
EXCHANGER

SAMPLE WASTE
20 PSI MAXIMUM BACKPRESSURE

SAMPLE
SWEEP

DIGITAL
DISPLAY

4-20 MA
OUTPUT
& ALARMS

MODEL 205 SPECIFICATIONS


POWER INPUT:
110 VAC 50/60 Hz @ 400 Watts.
220 VAC 50/60Hz (Optional)

TEMPERATURE:
Operating: 5C to 50C (Heating Optional)
Storage: 0C to 70C

ANALYTICAL PERFORMANCE:
(APPLICATION DEPENDENT)
Range Customer Specified: PPB W Thru PPM W
to Saturation (Lower Detectable Limit < 100 PPBW)
Accuracy: + 2% of Full Scale
Repeatability: + 1% of Full Scale
Resolution: 1 PPB
Linearity: + 1% of Full Scale
Drift: Nil
Temp. Coefficient: 0.01% 1 Degrees C
Analysis Time: 0.7 Seconds (Concentration Dependent)

ACCESSORY OPTIONS:
Spin Clean Filter w 1 liter/min. sweep
Type Z Purge, Type X Purge
Cabinet Heater & Thermostat
Special Sampling Systems
Validation System
Air Purifier For Hydrocarbon Free Carrier

DISPLAY:
Alpha Numeric LCD

MEMORY / COMPUTER INTERFACE:


RS-232/485 Serial Port

ANALOG OUTPUT SIGNAL:


4-20ma Linearized (standard)
4-20ma Isolated Linearized (Optional)

UTILITY GASES:
Air carrier clean and H2S free 200 ml/min.
Air or Nitrogen Purge Supply (Optional)

ALARM CONTACTS (Optional):


High and Low Concentration Relay
Diagnostic Trouble Shooting Includes:
Sample, Air, Purge Flow & Temp. Alarm

AREA CLASSIFICATIONS:
General Purpose (Standard)
Purge Class I Div. II or I, GR. B,C,D (Optional)

CABINET DIMENSIONS & WEIGHT:


Stainless Steel NEMA 4X
36" H x 24" W x 10" D
90cm H x 60cm W x 26cm DM
200 lbs. or 100 Kilograms (Without Options)

Quotation Information:
Analytical Systems International provides design and application engineering assistance for the users analyzer
requirements. For a quotation, please complete ASI Analyzer Quote Request Form at www.ASIWebPage.com
Analytical Systems reserves the right to make revisions and or changes without notice. Analytical Systems shall not be liable for any errors or omissions
made or any damages resulting from the use of the analyzer, information, or the manual. 03095 1995 Printed in the United States of America.

You might also like