PSOC Syllabus
PSOC Syllabus
SYLLABUS
Subject Code
: 10EE82
: 52
04
25
Exam Hours
03
Exam Marks
100
IA Marks
PART - A
UNIT - 1
CONTROL CENTER OPERATION OF POWER SYSTEMS:
Power system control and operating states, control center, digital computer configuration,
automatic generation control, area control error, operation without central computers,
expression for tie-line flow and frequency deviation, parallel operation of generators, area
lumped dynamic model.
8 Hours
UNIT -2 & 3
AUTOMATIC VOLTAGE REGULATOR: Basic generator control loops, Cross-coupling
between control loops, Exciter types, Exciter modeling, Generator modeling, Static
performance of AVR loop.
AUTOMATIC LOAD FREQUENCY CONTROL:
Automatic Load frequency control of single area systems, Speed governing system,
Hydraulic valve actuator, Turbine generator response, Static performance of speed governor,
Closing of ALFC loop, Concept of control area, Static response of primary ALFC loop,
Integral control, ALFC of multi-control area systems (POOL operation), The Two-Area
system, Modeling the Tie-Line, Block Diagram representation of Two-Area system, Static
response of Two-Area system and Tie-Line Bias control.
12 Hours
UNIT -4
CONTROL OF VOLTAGE AND REACTIVE POWER: Introduction, generation and
absorption of reactive power, relation between voltage, power and reactive power at a node,
single machine infinite bus systems, methods of voltage control, sub synchronous resonance,
voltage stability, voltage collapse.
6 Hours
PART B
UNIT -5
OPTIMAL SYSTEM OPERATION AND UNIT COMMITMENT: Introduction , Optimal
operation of generators on a bus bar, Statement of the Unit Commitment problem, need and
importance of unit commitment, Constraint in Unit Commitment, Unit Commitment solution
methods-Priority lists method,
6 Hours
UNIT -6
POWER SYSTEM SECURITY: Introduction, factors affecting power system security,
Security analysis, Contingency Selection, Techniques for contingency evaluation-D.C. load
flow and fast decoupled load flow.
6 Hours
UNIT 7
SYSTEM MONITORING AND CONTROL: Introduction , Energy management system,
the basis of
process, minimization technique for PSSE, Least Square estimation, Error and detection in
PSSE, System security and emergency control.
6 Hours
UNIT-8
POWER SYSTEM RELIABILITY: Introduction, Modes of failures of a system,
Generating system and its performance, derivation of reliability index, reliability measure for
N-unit system, cumulative probability outages-Recursive Relation, Loss of load probability,
Frequency and duration of a state.
8 Hours
TEXT BOOKS:
1. Modern Power System Analysis-I J Nagarath and D P Kothari, TMH, 3rd Edition,
2003
2.
3.
Power generation, operation and control-Allen J Wood & Woollenberg. John Wiley
and Sons, Second Edition, 2009.
4. Electric Power Systems-B.M.Weedy and B.J. Cory, Wiley student edition, 1999
5. Computer Aided Power System Operation and Analysis-R.N. Dhar, Tata McGrawHill, 1987.
REFERENCE:
1.
2. Power System Analysis, Operation and Control, Abhijit Chakrabarti and Sunita
Halder, PHI, Second Edition, 2009
3. Power system stability and control, Prabha Kundur, TMH, 9th reprint, 2007.