Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 121 views

    M20 Datasheet 01-5959-01r0 EN

    Uploaded by

    Tudorache Iulian
    The Emotron M20 provides flexible overload and underload protection for motors. It allows selection of overload protection only, underload protection only, or both. Independent response delays can be set for overload and underload conditions. Additional flexibility includes programmable output relays and settings for start attempts and reversing attempts. Current transformers are required and must match the motor rating to ensure accurate calibration of the M20 monitor.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    M20 Datasheet 01-5959-01r0 EN

    Uploaded by

    Tudorache Iulian
    121 views8 pages
    The Emotron M20 provides flexible overload and underload protection for motors. It allows selection of overload protection only, underload protection only, or both. Independent response delays can be set for overload and underload conditions. Additional flexibility includes programmable output relays and settings for start attempts and reversing attempts. Current transformers are required and must match the motor rating to ensure accurate calibration of the M20 monitor.

    Original Description:

    M20_Datasheet

    Original Title

    M20_Datasheet_01-5959-01r0_EN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Emotron M20 provides flexible overload and underload protection for motors. It allows selection of overload protection only, underload protection only, or both. Independent response delays can be set for overload and underload conditions. Additional flexibility includes programmable output relays and settings for start attempts and reversing attempts. Current transformers are required and must match the motor rating to ensure accurate calibration of the M20 monitor.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    121 views8 pages

    M20 Datasheet 01-5959-01r0 EN

    Uploaded by

    Tudorache Iulian
    The Emotron M20 provides flexible overload and underload protection for motors. It allows selection of overload protection only, underload protection only, or both. Independent response delays can be set for overload and underload conditions. Additional flexibility includes programmable output relays and settings for start attempts and reversing attempts. Current transformers are required and must match the motor rating to ensure accurate calibration of the M20 monitor.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    Emotron M20

    Shaft Power Monitor

    Data Sheet
    English

    The M20 provides complete flexibility in terms of the type


    of protection required for your application. You may select
    either overload and underload protection or simply overload
    with pre-alarm or underload with pre-alarm. Independent
    response delays are selectable for both overload and underload protection. Additional flexibility is provided in the
    form of programmable output relays, number of start
    attempts, number of reversing attempts etc.

    Sha

    ft p Emo
    ow tron
    er m M
    on 20
    ito
    r

    Inst
    ruc
    tio
    nm
    a
    Eng nual
    lish

    *)
    *)Terminal covers optional.

    Fig. 1

    Emotron M20 and current transformer (CT), both for mounting on standard DIN rail 35mm.
    L1
    L2
    L3

    L1

    11

    L2

    13

    L3

    A+

    NOTE: In power
    down, both relays
    are always N.O.

    AM20
    2

    S1 S2

    CTMxxx

    Max. 240 VAC (alt. 0 VDC-)

    R1

    R2
    DIG

    Stop

    Please see
    CTM info

    K1

    Start

    U
    V
    W

    K1

    NOTE: Monitor
    voltage see
    Note below

    -Reset
    -Auto set
    - Block

    PREALARM

    K1

    N (alt. 48 VDC+)

    Fig. 2

    Connection example

    NOTE: Make sure that the monitor voltage range e.g.


    3x380-500 VAC matches the connected motor/line
    voltage, e.g. 3x 400 V.

    CG Drives & Automation 01-5959-01r0

    Table 1

    Motor and CT less than 100 A

    RATED MOTOR CURRENT [A]

    CURRENT TRANSFORMER TYPE and NUMBER OF WINDINGS


    CTM 010

    0.4 1.0

    10

    1.01 2.0

    2.01 3.0

    3.1 5.0

    5.1 10.0

    CTM 025

    10.1 12.5

    12.6 25.0

    CTM 050

    26.0 50.0

    CTM 100

    51.0 100.0

    In order to ensure an accurate calibration of the M20, it is


    essential that you use the correct CTM and apply the exact
    number of windings in accordance with the tables.
    Table 2

    CT greater than 100A

    RATED MOTOR CURRENT [A]

    CURRENT TRANSFORMER TYPE and


    NUMBER OF PRIMARY WINDINGS

    101 150

    150:5
    1

    +
    +

    CTM 010
    2

    151 250

    250:5
    1

    +
    +

    CTM 010
    2

    251 500

    500:5
    1

    +
    +

    CTM 010
    2

    501 999

    1000:5
    1

    +
    +

    CTM 010
    2

    NOTE: The current transformer (CTMxxx) must be placed in


    the same phase that is connected to terminal 9, phase L1,
    see Fig. 2.

    CG Drives & Automation 01-5959-01r0

    Technical Data

    26mm 35mm
    (1.02) (1.38)

    90mm(3.54)

    45x90x115 mm (1.77" x 3.54" x 4.53")

    Dimensions (WxHxD)

    45mm (1.77)

    115mm(4.53)

    Mounting

    35 mm DIN rail 46277

    Weight

    0.30 kg (10.5 oz)

    Supply voltage (10%)

    1x100-240 VAC, 3x100-240 VAC, 3x380-500 VAC 3x525-690 VAC

    Frequency

    50 or 60 Hz

    Current input

    Current transformer; CTM 010, 025, 050 and 100. Input 0-55 mA. (>100 A extra transformer
    needed)

    Power consumption

    Max. 6 VA

    Start-up delay

    1-999 s

    Hysteresis

    0-50% of rated motor power

    Response delay max

    0.1-500 s

    Response delay min

    0.1-500 s

    Relay output

    5 A/240 VAC Resistive, 1.5 A/240 VAC Pilot duty/AC12

    Analogue output

    Max. load 500 ohm

    Digital input

    Max. 240 VAC or 48 VDC. High: 24 VAC/DC,


    Low: <1 VAC/DC. Reset >50 ms

    Fuse

    Max. 10 A

    Terminal wire size

    Use 75C copper (CU) wire only. 0.2-4.0 mm2 single core (AWG12). 0.2-2.5 mm2 flexible core
    (AWG14), stripped length 8 mm (0.32")

    Terminal tightening torque

    0.56-0.79 Nm (5-7 lb-in)

    Accuracy

    2%, 1 unit cos phi>0.5; excl. current transformer; +20C (+68F)

    Repeatability

    1 unit 24h; +20C (+68F)

    Temperature tolerance

    Max. 0.1%/C

    Operating temperature

    -20 to +50C (-4F to +122F)

    Storage temperature

    -30 to +80C (-22F to +176F)

    Protection class

    IP20

    RoHS directive

    2002/95/EC

    Approved to

    CE (up to 690VAC), UL and cUL (up to 600 VAC)

    Article numbers
    Article number

    Designation

    01-2520-25

    Emotron M20 1x100-240/3x100-240 VAC

    01-2520-45

    Emotron M20 3x380-500 VAC

    01-2520-55

    Emotron M20 3x525-690 VAC

    CG Drives & Automation 01-5959-01r0

    Technical Data for Current Transformer (CT)


    Type

    Dimension (WxQ)

    Weight*

    Mounting

    CTM 010

    27 (35) x48mm

    0.20 kg

    35mm DIN rail 46277

    CTM 025

    27 (35) x48mm

    0.20 kg

    35mm DIN rail 46277

    CTM 050

    27 (35) x48mm

    0.20 kg

    35mm DIN rail 46277

    CTM 100

    45 (58) x78mm

    0.50 kg

    35mm DIN rail 46277

    *)Weight including 1m (39 inch) cable. Please note that


    max. length of the CTM cable is 1 m and this cable cannot
    be extended.

    Fig. 3

    Current transformer, CTM xxx.

    Accessories and documentation


    Article number

    Designation

    01-2471-10

    Current Transformer (CT) CTM010, max. 10 A

    01-2471-20

    Current Transformer (CT) CTM025, max. 25 A

    01-2471-30

    Current Transformer (CT) CTM050, max. 50 A

    01-2471-40

    Current Transformer (CT) CTM100, max. 100 A

    01-2368-00

    Front Panel Kit 1 (2xterminal covers included)

    01-4136-01

    2xTerminal covers

    01-5958-00

    Instruction manual (Swedish)

    01-5958-01

    Instruction manual (English)

    01-5958-02

    Instruction manual (German)

    01-5958-03

    Instruction manual (Dutch)

    01-5958-04

    Instruction manual (Spanish)

    01-5958-08

    Instruction manual (French)

    01-5958-09

    Instruction manual (Russian)

    EU (European Union) specifications


    EMC
    Electrical safety
    Rated insulated voltage
    Rated impulse
    withstand voltage

    EN 50081-1, EN 50081-2,
    EN 50082-1, EN 61000-6-2
    IEC 947-5-1
    690 V

    Pollution degree
    2
    Terminals 3, 4, 5, 6, 7 and 8 are basic insulated from the
    line.
    Terminals 3 and 4 are basic insulated from terminals 5, 6, 7
    and 8.

    4000 V

    CG Drives & Automation 01-5959-01r0

    Parameter List
    Window
    00

    Function

    Range

    Default

    Custom

    Symbol

    Alarm indication
    Measured shaft power in % of rated power

    0-125

    Measured shaft power in kW

    0-745

    kW

    Measured shaft power in % of rated power

    0-125

    Measured shaft power in HP

    0-999

    02

    Measured line voltage

    90-760 V

    03

    Measured current

    0.00-999 A

    04

    Parameter lock

    0-999

    Monitor function

    OVER- and UNDERLOAD, OVERLOAD and


    OVERLOAD, UNDERLOAD UNDERLOAD

    01

    05

    11

    12

    13

    14

    MAX Main Alarm


    (relay R1)

    MAX Pre-Alarm
    (relay R2)

    MIN Pre-Alarm
    (relay R2)

    MIN Main Alarm


    (relay R1)

    0-125

    100

    0-745

    2.2

    kW

    0-125

    100

    0-999

    0-125

    100

    0-745

    2.2

    kW

    0-125

    100

    0-999

    0-125

    0-745

    kW

    0-125

    0-999

    0-125

    0-745

    kW

    0-125

    0-999

    21

    MAX Main Alarm margin

    0-100

    16

    22

    MAX Pre-Alarm margin

    0-100

    23

    MIN Pre-Alarm margin

    0-100

    24

    MIN Main Alarm margin

    0-100

    16

    31

    Start delay

    1-999

    32

    Response delay, overload

    0.1-500 s

    0.5

    33

    Hysteresis

    0-50

    34

    Response delay, underload

    0.1-500s

    0.5

    35*

    Pause/Reverse time

    3-90

    36*

    Autoreset (start attempts)

    0-5

    41

    Rated motor power

    0.10-745

    2.2

    0.13-999

    42

    Rated current

    0.01-999

    5.6

    43

    Number of phases

    1PH/3PH

    3PH

    61

    Main alarm latch

    on/OFF

    OFF

    62

    Alarm at no motor
    current

    on/OFF

    OFF

    kW
    A

    CG Drives & Automation 01-5959-01r0

    Window

    Function

    Range

    Default

    63

    Main Alarm relay R1

    nc/no

    nc

    64

    Pre-Alarm relay R2

    nc/no

    no

    65*

    Relay function

    0 = M20
    1 = DLM
    2 = Reverse

    81

    Digital input

    rES/AU/bLo

    rES

    82

    Block timer

    0.0-90

    0.0

    91

    Analogue output

    0.20/4.20/20.0/20.4

    0.20

    92**

    Analogue Out low value

    0-100

    93**

    Analogue Out high value

    0-125

    99

    Factory defaults

    dEF/USr

    Custom

    Symbol

    dEF

    * See Special functions in chapter 9, Emotron M20


    Instruction manual.
    ** See Setting analogue output range in chapter 9,
    Emotron M20 Instruction manual.

    CG Drives & Automation 01-5959-01r0

    Mrsaregatan 12
    Box 222 25
    SE-250 24 Helsingborg
    Sweden
    T +46 42 16 99 00
    F +46 42 16 99 49
    www.emotron.com / www.cgglobal.com

    CG Drives & Automation, 01-5959-01r0 2013-09-09

    CG Drives & Automation Sweden AB

    You might also like